Daily Archives

Articles indexed Tuesday June 12 2012

Page 14/18 | < Previous Page | 10 11 12 13 14 15 16 17 18  | Next Page >

  • ajaxplorer: open_basedir restriction in effect

    - by mrzasa
    I'm trying to install ajaxplorer at a shared hosting in my home folder. When I navigate to the main page, I get an error: is_writable(): open_basedir restriction in effect. File(/var/lib/php5) is not within the allowed path(s): (/var/www//username/:/usr/sbin/sendmail:/usr/share/php :/home/www/appname::/usr/share/pear:/dev/urandom) What might be the cause? How could I fix it? There is php 5.3.3 installed, apache 2.2.16. I use ajaxplorer 4.0.4. EDIT: The problem is caused by this code part: $tmpDir = session_save_path(); $this-testedParams["Session Save Path"] = $tmpDir; if($tmpDir != ""){ $this-testedParams["Session Save Path Writeable"] = is_writable($tmpDir); Error appears in the last line, but I enclosed the context.

    Read the article

  • Auth-Type :- Reject in RADIUS users file matches inner tunnel request but sends Access-Accept

    - by mgorven
    I have WPA2 802.11x EAP authentication setup using FreeRADIUS 2.1.8 on Ubuntu 10.04.4 talking to OpenLDAP, and can successfully authenticate using PEAP/MSCHAPv2, TTLS/MSCHAPv2 and TTLS/PAP (both via the AP and using eapol_test). I am now trying to restrict access to specific SSIDs based on the LDAP groups which the user belongs to. I have configured group membership checking in /etc/freeradius/modules/ldap like so: groupname_attribute = cn groupmembership_filter = "(|(&(objectClass=posixGroup)(memberUid=%{User-Name}))(&(objectClass=posixGroup)(uniquemember=%{User-Name})))" and I have configured extraction of the SSID from Called-Station-Id into Called-Station-SSID based on the Mac Auth wiki page. In /etc/freeradius/eap.conf I have enabled copying attributes from the outer tunnel into the inner tunnel, and usage of the inner tunnel response in the outer tunnel (for both PEAP and TTLS). I had the same behaviour before changing these options however. copy_request_to_tunnel = yes use_tunneled_reply = yes I'm running eapol_test like this to test the setup: eapol_test -c peap-mschapv2.conf -a 172.16.0.16 -s testing123 -N 30:s:01-23-45-67-89-01:Example-EAP with the following peap-mschapv2.conf file: network={ ssid="Example-EAP" key_mgmt=WPA-EAP eap=PEAP identity="mgorven" anonymous_identity="anonymous" password="foobar" phase2="autheap=MSCHAPV2" } With the following in /etc/freeradius/users: DEFAULT Ldap-Group == "employees" and running freeradius-Xx, I can see that the LDAP group retrieval works, and that the SSID is extracted. Debug: [ldap] performing search in dc=example,dc=com, with filter (&(cn=employees)(|(&(objectClass=posixGroup)(memberUid=mgorven))(&(objectClass=posixGroup)(uniquemember=mgorven)))) Debug: rlm_ldap::ldap_groupcmp: User found in group employees ... Info: expand: %{7} -> Example-EAP Next I try to only allow access to users in the employees group (regardless of SSID), so I put the following in /etc/freeradius/users: DEFAULT Ldap-Group == "employees" DEFAULT Auth-Type := Reject But this immediately rejects the Access-Request in the outer tunnel because the anonymous user is not in the employees group. So I modify it to only match inner tunnel requests like so: DEFAULT Ldap-Group == "employees" DEFAULT FreeRADIUS-Proxied-To == "127.0.0.1" Auth-Type := Reject, Reply-Message = "User does not belong to any groups which may access this SSID." Now users which are in the employees group are authenticated, but so are users which are not in the employees group. I see the reject entry being matched, and the Reply-Message is set, but the client receives an Access-Accept. Debug: rlm_ldap::ldap_groupcmp: Group employees not found or user is not a member. Info: [files] users: Matched entry DEFAULT at line 209 Info: ++[files] returns ok ... Auth: Login OK: [mgorven] (from client test port 0 cli 02-00-00-00-00-01 via TLS tunnel) Info: WARNING: Empty section. Using default return values. ... Info: [peap] Got tunneled reply code 2 Auth-Type := Reject Reply-Message = "User does not belong to any groups which may access this SSID." ... Info: [peap] Got tunneled reply RADIUS code 2 Auth-Type := Reject Reply-Message = "User does not belong to any groups which may access this SSID." ... Info: [peap] Tunneled authentication was successful. Info: [peap] SUCCESS Info: [peap] Saving tunneled attributes for later ... Sending Access-Accept of id 11 to 172.16.2.44 port 60746 Reply-Message = "User does not belong to any groups which may access this SSID." User-Name = "mgorven" and eapol_test reports: RADIUS message: code=2 (Access-Accept) identifier=11 length=233 Attribute 18 (Reply-Message) length=64 Value: 'User does not belong to any groups which may access this SSID.' Attribute 1 (User-Name) length=9 Value: 'mgorven' ... SUCCESS Why isn't the request being rejected, and is this the right way to implement this?

    Read the article

  • CNTLM issue with intranet (maybe DNS)

    - by htorque
    On my Linux box I need to use an ISA proxy that requires authentication to reach the internet. I therefore installed CNTLM and configured it to point to the proxy address and listen on port 4321. I then configured my GNOME distribution to use localhost:4321 as global proxy for HTTP and HTTPS. The result: I can connect to the internet. I can ping intranet IPs, I do receive name resolution for intranet sites, yet I cannot ping them or open any intranet site in a browser (configured to use the distributions proxy) unless I use the site's IP address. I tried blocking the intranet IP range in the CNTLM config file without luck.

    Read the article

  • Installation error on Ubuntu 11.10

    - by Abhishek Chanda
    I upgraded to Ubuntu 11.10 and now, when I try to install or uninstall a software, I get this error installArchives() failed: (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 158945 files and directories currently installed.) Removing aisleriot ... Processing triggers for gconf2 ... Processing triggers for man-db ... Processing triggers for hicolor-icon-theme ... Processing triggers for libglib2.0-0 ... Processing triggers for gnome-menus ... Processing triggers for desktop-file-utils ... Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Setting up flashplugin-downloader (11.0.1.152ubuntu1) ... Downloading... --2012-05-02 18:47:29-- http://archive.canonical.com/pool/partner/a/adobe-flashplugin/adobe-flashplugin_11.0.1.152.orig.tar.gz Resolving archive.canonical.com... 91.189.92.150, 91.189.92.191 Connecting to archive.canonical.com|91.189.92.150|:80... connected. HTTP request sent, awaiting response... 404 Not Found 2012-05-02 18:47:29 ERROR 404: Not Found. download failed The Flash plugin is NOT installed. dpkg: error processing flashplugin-downloader (--configure): subprocess installed post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of flashplugin-installer: flashplugin-installer depends on flashplugin-downloader (>= 11.0.1.152ubuntu1); however: Package flashplugin-downloader is not configured yet. dpkg: error processing flashplugin-installer (--configure): dependency problems - leaving unconfigured No apport report written because the error message indicates its a followup error from a previous failure. Errors were encountered while processing: flashplugin-downloader flashplugin-installer Error in function: SystemError: E:Sub-process /usr/bin/dpkg returned an error code (1) Setting up flashplugin-downloader (11.0.1.152ubuntu1) ... Downloading... --2012-05-02 18:47:33-- http://archive.canonical.com/pool/partner/a/adobe-flashplugin/adobe-flashplugin_11.0.1.152.orig.tar.gz Resolving archive.canonical.com... 91.189.92.191, 91.189.92.150 Connecting to archive.canonical.com|91.189.92.191|:80... connected. HTTP request sent, awaiting response... 404 Not Found 2012-05-02 18:47:34 ERROR 404: Not Found. download failed The Flash plugin is NOT installed. dpkg: error processing flashplugin-downloader (--configure): subprocess installed post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of flashplugin-installer: flashplugin-installer depends on flashplugin-downloader (>= 11.0.1.152ubuntu1); however: Package flashplugin-downloader is not configured yet. dpkg: error processing flashplugin-installer (--configure): dependency problems - leaving unconfigured This seems to be a bug that has been reported.Does anyone know a workaround?

    Read the article

  • Repository Spec file

    - by ahmadfrompk
    I have source of webfiles. I need to make a RPM for it. I have placed my source in SOURCES folder and use following spec file. But it is creating noarch rpm with 2MB size, but my source is greater than 2MB size. Its also did not attach files with this. I think i have a problem in spec file. Summary: my_project rpm script package Name: my_project Version: 1 Release: 1 Source0: my_project-1.tar.gz License: GPL Group: MyJunk BuildArch: noarch BuildRoot: %{_tmppath}/%{name}-buildroot %description Make some relevant package description here %prep %setup -q %build %install install -m 0755 -d $RPM_BUILD_ROOT/opt/my_project %clean rm -rf $RPM_BUILD_ROOT %post echo " " echo "This will display after rpm installs the package!" %files %dir /opt/my_project

    Read the article

  • Postfix: How to configure Postfix with virtual Dovecot mailboxes?

    - by user75247
    I have configured a Postfix mail server for two domains: domain1.com and domain2.com. In my configuration domain1 has both virtual users with Maildirs and aliases to forward mail to local users (eg. root, webmaster) and some small mailing lists. It also has some virtual mappings to non-local domains. Domain2 on the other hand has only virtual alias mappings, mainly to corresponding 'users' at domain1 (eg. mails to [email protected] should be forwarded to [email protected]). My problem is that currently Postfix accepts mail even for those users that don't exist in the system. Mail to existing users and /etc/aliases works fine. Postfix documentation states that the same domain should never be specified in both mydestination and virtual_mailbox_maps, but If I specify mydestination as blank then postfix validates recipients against virtual_mailbox_maps but rejects mail for local aliases of domain1.com. /etc/postfix/main.cf: myhostname = domain1.com mydomain = domain1.com mydestinations = $myhostname, localhost.$mydomain, localhost virtual_mailbox_domains = domain1.com virtual_mailbox_maps = hash:/etc/postfix/vmailbox virtual_mailbox_base = /home/vmail/domains virtual_alias_domains = domain2.com virtual_alias_maps = hash:/etc/postfix/virtual alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases virtual_transport = dovecot /etc/postfix/virtual: domain1.com right-hand-content-does-not-matter firstname.lastname user1 [more aliases..] domain2.com right-hand-content-does-not-matter @domain2.com @domain1.com /etc/postfix/vmailbox: [email protected] user1/Maildir [email protected] user2/Maildir /etc/aliases: root: :include:/etc/postfix/aliases/root webmaster: :include:/etc/postfix/aliases/webmaster [etc..] Is this approach correct or is there some other way to configure Postfix with Dovecot (virtual) Maildirs and Postfix aliases?

    Read the article

  • Can't authorize a server for Amazon RDS

    - by Parris
    We are attempting to slowly migrate a website over to AWS among other things. We decided the first thing to move was the database. We have some dedicated server with a different hosting provider. We only have one IP. I am having trouble authorizing the ip so that the old server can connect to RDS. It simply hangs for a while while using the mysql cli, then responds: ERROR 2003 (HY000): Can't connect to MySQL server on 'db.address.us-east-1.rds.amazonaws.com' (110) It did work on my laptop though. I am not quite sure what is wrong. I have a feeling I don't quite understand CIDR/IP. I simply took the ip address and tacked on /32 at the end. Then I gleaned some information that it also has to do with subnet mask? ifconfig reports: 255.255.255.0 I found a calculator and the IP changed a bit and had /24 at the end. That still didn't work. One other note... perhaps i dont know enough about the differences between OS. The hosting provider is using centOS, while our development machines are all ubuntu. Any insight would be extremely helpful! THANKS :)

    Read the article

  • Compiling PHP with cURL and SSL support on Redhat EC5

    - by Kevin Sedgley
    I don't even know where to begin to be honest. Trying to use an external API that requires SSL connections, I discover that SSL in needed on cURL, but this (apparently) requires PHP to be reinstalled and compiled with cURL / SSL support. Not really experienced with compiling PHP, and I'm not sure if our server even has make or build, the only luck I've had is with rpm's before. This really isn't in my job description. Any help most most welcome!

    Read the article

  • Installing Wordpress - constant PHP/MySQL extension appears missing

    - by Driss Zouak
    I've got Win2003 w/IIS6, PHP 5 and MySQL installed. I can confirm PHP is installed correctly because I have a testMe.php that runs properly. When I run the Wordpress setup, I get informed that Your PHP installation appears to be missing the MySQL extension which is required by WordPress. But in my PHP.ini in the DYNAMIC EXTENSIONS section I have extension=php_mysql.dll extension=php_mysqli.dll I verified that mysql.dll and libmysql.dll are both in my PHP directory. I copied my libmysql.dll to the C:\Windows\System32 directory. When I try to run the initial setup for WordPress, I get this answer. I've Googled setting this up, and everything comes down to the above. I'm missing something, but none of the instructions that I've found online seem to cover whatever that is.

    Read the article

  • Matching ID3 Tags to Existing Files

    - by SLaks
    I have a collection of ripped CDs that were transcoded to a very low bitrate. (and I lost the original MP3s) I'd like to re-rip the CDs to a higher bitrate, and apply the ID3 tags from the existing rips to the new files. (These are custom tags; they will not be found in online databases) Is there any way to automatically copy ID3 tags by length and track number, or do I need to write one myself?

    Read the article

  • Which kind of memory do I need for this laptop?

    - by Joshua
    I'm trying to upgrade the RAM in my laptop. It has two slots, but only 1 is filled with a 4gb stick, so I am looking for another 4gb to stick in the other slot. It is a HP g6-1d38dx. I found this RAM, 9-9-9-24, but it is 1333mhz. Looks like it says my max bandwith on the stock stick is 800MhZ. Would that still be cool to use since it is more than the max? http://www.newegg.com/Product/Product.aspx?Item=N82E16820576005 Also will mixing and matching brands have much of an effect? Can someone link a proper module for my machine?

    Read the article

  • Do control groups improve system performances?

    - by qdii
    According to this website, enabling cgroups in the kernel can boost performances by sharing resources in a better way. In particular, the conclusion states that:  Nevertheless, with a little trial and error, cgroups can help you improve the efficiency of your systems’ resource usage and avoid downtime due to overusage of a single service. Kernel seeds, however, recommend to deactivate them altogether. They say: Consider these [kernel] settings poison. They remain nothing but system slow-downs. They are all off by default [in the proposed kernel config file]. Who should I trust?

    Read the article

  • Display is slightly blurry on (native) 1920x1080 resolution

    - by Martin Tuskevicius
    I have a computer monitor that is approximately 23" in size. Its native resolution is 1920x1080, and Windows 7 will not allow it to be any higher. However, I cannot make the resolution a little lower as well. When I right-click on my desktop and select 'Screen resolution,' the vertical slider has only two options: 1920x1080 and 1280x720. There are no real problems that I am having besides the fact that the image is slightly blurry. I can easily make things out and see them, but I definitely feel that the image is not as clear as it could be. My graphics card is ATI Radeon HD 5450 and it has the latest graphics drivers installed. I've tried playing around with the AMD VISION Engine Control Center to see if I can change an option to make the image clearer, but I had no luck. I did find one odd thing, though. When I lowered the refresh rate from 60Hz to 50Hz, the image kind of "zoomed in" but it also became perfectly clear like I would expect it to look. The problem is that when I use 50Hz, the image zooms in a little on the center and I lose maybe an inch and a half of the screen (I do not see the bar at the top of applications, I do not see the Windows taskbar thing, etc). I figured if I could somehow zoom in so that the entire image fills the screen (not the slightly cropped version) then I would have the perfectly crisp image of 50Hz, and also the uncropped image of 60Hz. However, upon zooming in, the image began to look blurry again just like it did with 60Hz. So I am at a loss here. I do not know how to make the image look as clear as it should. I have the latest drivers (I updated them today) and I know that my monitor supports the resolution that I am trying to use. Has anybody experienced something like this before? I'd really appreciate any input - thanks! Update: I have figured out how to make the display look crisp! I set it to the 50Hz option, and then I changed the scaling through the monitor itself, rather than software. Now, however, I am finding that games look pretty bad because since it is clear, the lower quality really becomes apparent. I cannot run new games at 1080p, so I run them at the lowest resolution possible (1280x720, since it is the only other option offered, as I have mentioned). So I am wondering, is there a way to have Windows display more resolution options?

    Read the article

  • How can I set `less` or `more` max lines (scrollable height) limit/boundary in linux?

    - by Rudie
    (Sorry for the title. Any suggestions?) I've set my commandline PS1 to cover 3 lines: white space user, server and pwd $ or # to input I think less (or more?) is configured to break after window's height - 1, because when I do a $ git log, the first two lines are invisible at the top of the window and the rest is scrollable. I'm not sure who handles this scrolling and its configuration, but I assume GIT uses less/more. Where can I configure that my scrollable window is window height - 3 lines and not window height - 1? More info: If I cat lines.txt | less with a 23 line file, it shows the entire file and no scrolling. If I do the same with a 24 line file, it doesn't show line 1 (and no scrolling). With 25 lines: doesn't show lines 1 and 2 (and no scrolling). With 26 lines: shows line 1 and scrolling! The less breakpoint is at the wrong height...

    Read the article

  • Which Linux distribution for vehicle LCD instrument panel

    - by Brent
    I will be designing an instrument panel for a vehicle to display the common gauges that you would find in a car - (speedometer, rpm, fuel level, oil pressure, etc.). We have selected a 7" LCD and are in the process of narrowing down the hardware (This will use an ARM processor). The idea is to read these values off of the CAN Bus and update the UI with those values. This needs to have a fairly quick boot time, 5-10 seconds would be acceptable from the time the ignigtion is turned on to the time the UI is running. I have been doing a lot of research on which linux distribution to use, but I wanted to ask the question here to get the community's suggestions. I have been a .NET programmer for years, so linux is a new world to me. Here is what I have found so far... Tizen is geared for In-Vehicle Infotainment (IVI) (plus some others). However, this project is not an IVI, and I do not need the phone dialer, navigation, etc. Meego is dead, and Tizen seems to be the replacement Angstrom, Debian... would either of these be useful? I am not tied to a particular programming language or IDE. Any help and direction is appreciated!

    Read the article

  • How do I tell if my firewire connection is running as 400 or 800?

    - by Tom
    I have a MacBook Pro with FireWire 800 and a freecom external harddrive that has USB3, FireWire 400 and 800. I am using a Nikkai FireWire 800 cable that has 800 connector on one end and a 400 connector on the other end. The 800 connector is attached to the MacBook pro and the 400 connector is attached to the freecom drive. Is there any way to tell what connection has been established? I looked at disk utility and it simply said 'FireWire'. Is there a command-line tool that would give more information? If it's 400, I plan to swap the cable for 800 connector at both ends.

    Read the article

  • Computer loads BIOS, but won't load OS

    - by LEGEND383
    I have just purchased a brand new motherboard bundle, installed into the old case with the old PSU and the old HDD. I can get into the BIOS, but whenever I try to boot from the HDD, it just sits with the fans going, but nothing is displayed. The moniter works (tested with another machine), and I'd hope there are no problems with the motherboard, CPU or RAM because as I said I only brought them today. The only things I can think of are: The PSU's motherboard connector is a 20-pin, and the motherboard has a 24-pin connector (not a problem with the previous board) The OS is not supported (doesn't seem likly to me, but possible I guess) Here is my system configuration: Motherboard: ASUS F1A55-M le CPU: AMD APU A6 3500 HDD: 1Tb SATA RAM: 4Gb DDR3 OS: Ubuntu Satanic v666.9 PSU: Winpower ATX-400 (this thing is REALLY old) If anyone is able to offer a reason as to why this is not working, or a possible solution, it would be greatly appriciated.

    Read the article

  • How can I make Firefox ignore Next/Prev-Buttons on the Keyboard?

    - by ThiefMaster
    My ThinkPad notebook has "next page" and "previous page" buttons right next to the cursor keys. While writing code (sometimes in textareas on pages such as StackOverflow) accidentally hitting one of these keys is very annoying - either you navigate away or you get the "do you really want to navigate way" prompt. I never use those keys anyway so I wonder if there's an option in Firefox to ignore those keys. An option to remap them globally or simply disable them would (OS: Windows 7) be fine, too.

    Read the article

  • Color Calibrate Dual Monitor XP SP2

    - by Laramie
    This topic has been touched on before but not really answered. I have a dual monitor system and the colors differ wildly. I currently live Buenos Aires where color correction hardware costs premium prices. I do some graphic design, but don't require a pro-level calibration. That said, I'd like my monitors to be set as close to "true color" as possible. I've located the useful and free Monitor Calibration Wizard, but it seems to adjust the entire system internally at startup. I could use the Microsoft Color Control Panel Applet to set a different ICC or ICM profile for each monitor, but the Monitor Calibration Wizard outputs its own format for profiles.

    Read the article

  • How to create a bootable Ubuntu Linux (10.04) USB installation for Macintosh

    - by vdavidovski
    I tried searching the Internet, but could not find a decent tutorial explaining how to create a bootable Ubuntu Linux (10.04) USB installation that could be run not only on a PC but also on Macs and MacBook Pros. In addition, I tried refit, but ended with "Missing operating system" error. Here is basically the layout of my bootable under PC Ubuntu USB drive (using MBR): Partition 1 (ext3, bootable) - Ubuntu Linux 32 bit, contains also grub2 bootloader. Partition 2 (ext3) - Ubuntu Linux 64 bit. Partition 3 (fat32) - contains data. What would be the best way to enable this drive to boot under Mac OS X? And if refit has to be used, could I simply have one more partition on the USB drive containing it? Thanks!

    Read the article

  • Hack Your Kindle for Easy Font Customization

    - by Jason Fitzpatrick
    The font options included with the Kindle are certainly serviceable, but why limit yourself? Today we’ll show you how to easily swap out the font files on your Kindle for a completely customized reading experience. Why customize the font? Why not! It’s your ebook reader and if you want the font to be crisper, thicker, look like it belongs on Star Trek, or pack more words per line, there’s no need to let Amazon’s design decisions stand in your way. Today we’re going to show you how you can install new fonts on your Amazon Kindle with free tools and about 20 minutes of tinkering (most of which will be spent waiting for the Kindle to reboot and rebuild the fonts). Hack Your Kindle for Easy Font Customization HTG Explains: What Is RSS and How Can I Benefit From Using It? HTG Explains: Why You Only Have to Wipe a Disk Once to Erase It

    Read the article

  • Visit the Museum of Endangered Sounds for a Bit of Nostalgic Sound-Based Fun

    - by Asian Angel
    Are you ready for a trip down memory lane? Then you will definitely want to visit the Museum of Endangered Sounds where you can have fun listening to the classic sounds of yesteryear! Enjoy listening to the sound of dial-up, the login sound of Windows 95, that classic Nokia ringtone, and more at the Museum. Click on a picture to play the sound, then click on the picture again to stop it. The sounds will continue to play until you click on the chosen picture… Museum of Endangered Sounds [via Neatorama] Browse on over to another of our ETC posts for more nostalgic sound fun: Hack Your Kindle for Easy Font Customization HTG Explains: What Is RSS and How Can I Benefit From Using It? HTG Explains: Why You Only Have to Wipe a Disk Once to Erase It

    Read the article

  • Follow Your World Notifies You When Satellite Images Update

    - by Jason Fitzpatrick
    Satellite images update infrequently enough to make manually checking for new photos of interesting locations impractical; automate the process with notifications from Follow Your World. Courtesy of Google, the Follow Your World tool allows you to plug in locations and receive email updates when the satellite images for that location are updated. Whether you’re looking for crisp high-res images of monuments around the world or shots of your own backyard, it’s easy to set it up and wait for the updates to roll in. Follow Your World [via Google Lat Long Blog] Hack Your Kindle for Easy Font Customization HTG Explains: What Is RSS and How Can I Benefit From Using It? HTG Explains: Why You Only Have to Wipe a Disk Once to Erase It

    Read the article

  • BlackBerry 10 : premières fonctionnalités et premières images exclusives de l'OS fondé sur QNX qui doit sauver RIM

    BlackBerry 10 : premières fonctionnalités et premières images exclusives Du futur OS mobile qui doit sauver RIM RIM a profité de sa conférence pour développeurs, le BlackBerry Jam, de passage à Paris pour dévoiler les premières informations sur son prochain OS. Si certains participants sont repartis avec des téléphones expérimentaux, des BlackBerry Dev Alpha - mélange de tablette PlayBook miniature et d'iPhone sans aucun bouton - ces appareils ne donnent cependant pas beaucoup d'indices sur ce que sera le système. Ces appareils ne sont en effet équipés que d'un simple navigateur. C'est en aparté que David Derrida, Directeur produit chez RIM France, a fait une première démon...

    Read the article

  • NomCom Election

    - by NeilHambly
    I've waited until I got confirmation that I would indeed be included on the slate of applications for the 2012 NomCom Committee before publishing this blog Now I have been given the GREEN light on that from PASS I want to provide you with some brief background about myself, as you may not know me well or have no idea even who I am. I also wanted to give you some insight into why I submitted my application to be a part of this NomCom committee, so I think it is useful to answer the key question...(read more)

    Read the article

< Previous Page | 10 11 12 13 14 15 16 17 18  | Next Page >