Monthly Archives

Articles indexed in November 2013

Page 148/211 | < Previous Page | 144 145 146 147 148 149 150 151 152 153 154 155  | Next Page >

  • Blue Screen error BAD_POOL_CALLER 0x000000C2

    - by Adam
    My computer was working fine for months but now when it starts up the Windows XP screen comes up to show the computer is starting up but then a blue screen appears with the error below: BAD_POOL_CALLER STOP: 0x000000C2 (0x00000043, 0xDB3C6000, 0x00000000, 0x00000000) I have tried booting off the Windows XP CD and trying to do a re-installation but when the setup try's to query the disk the setup crashes and exists. I've run diags and that says everything is fine. Any ideas?

    Read the article

  • Personal Technology – Laptop Screen Blank – No Post – No BIOS – No Boot

    - by Pinal Dave
    If your laptop Screen is Blank and there is no POST, BIOS or boot, you can follow the steps mentioned here and there are chances that it will work if there is no hardware failure inside. Step 1: Remove the power cord from the laptop Step 2: Remove the battery from the laptop Step 3: Hold power button (keep it pressed) for almost 60 seconds Step 4: Plug power back in laptop Step 5: Start computer and it should just start normally. Step 6: Now shut down Step 7: Insert the battery back in the laptop Step 8: Start laptop again and it should work Note 1: If your laptop does not work after inserting back the memory. Remove the memory and repeat above process. Do not insert the battery back as it is malfunctioning. Note 2: If your screen is faulty or have issues with your hardware (motherboard, screen or anything else) this method will not fix your computer. Those, who care about how I come up with this not SQL related blog post, here is the very funny true story. If you are a married man, you will know what I am going to describe next. May be you have faced the same situation or at least you feel and understand my situation. My wife’s computer suddenly stops working when she was searching for my daughter’s mathematics worksheets online. While the fatal accident happened with my wife’s computer (which was my loyal computer for over 4 years before she got it), I was working in my home office, fixing a high priority issue (live order’s database was corrupted) with one of the largest eCommerce websites.  While I was working on production server where I was fixing database corruption, my wife ran to my home office. Here is how the conversation went: Wife: This computer does not work. I: Restart it. Wife: It does not start. I: What did you do with it? Wife: Nothing, it just stopped working. I: Okey, I will look into it later, working on the very urgent issue. Wife: I was printing my daughter’s worksheet. I: Hm.. Okey. Wife: It was the mathematics worksheet, which you promised you will teach but you never get around to do it, so I am doing it myself. I: Thanks. I appreciate it. I am very busy with this issue as million dollar transaction are not happening as the database got corrupted and … Wife: So what … umm… You mean to say that you care about this customer more than your daughter. You know she got A+ in every other class but in mathematics she got only A. She missed that extra credit question. I: She is only 4, it is okay. Wife: She is 4.5 years old not 4. So you are not going to fix this computer which does not start at all. I think our daughter next time will even get lower grades as her dad is busy fixing something. I: Alright, I give up bring me that computer. Our daughter who was listening everything so far she finally decided to speak up. Daughter: Dad, it is a laptop not computer. I: Yes, sweety get that laptop here and your dad is going to fix the this small issue of million dollar issue later on. I decided to pay attention to my wife’s computer. She was right. No matter what I do, it will not boot up, it will not start, no BIOS, no POST screen. The computer starts for a second but nothing comes up on the screen. The light indicating hard drive comes up for a second and goes off. Nothing happens. I removed every single USB drive from the laptop but it still would not start. It was indeed no fun for me. Finally I remember my days when I was not married and used to study in University of Southern California, Los Angeles. I remembered that I used to have very old second (or maybe third or fourth) hand computer with me. In polite words, I had pre-owned computer and it used to face very similar issues again and again. I had small routine I used to follow to fix my old computer and I had decided to follow the same steps again with this computer. Step 1: Remove the power cord from the laptop Step 2: Remove the battery from the laptop Step 3: Hold power button (keep it pressed) for almost 60 seconds Step 4: Plug power back in laptop Step 5: Start computer and it should just start normally. Step 6: Now shut down Step 7: Insert the battery back in the laptop Step 8: Start laptop again and it should work Note 1: If your laptop does not work after inserting back the memory. Remove the memory and repeat above process. Do not insert the battery back as it is malfunctioning. Note 2: If your screen is faulty or have issues with your hardware (motherboard, screen or anything else) this method will not fix your computer. Once I followed above process, her computer worked. I was very delighted, that now I can go back to solving the problem where millions of transactions were waiting as I was fixing corrupted database and it the current state of the database was in emergency mode. Once I fixed the computer, I looked at my wife and asked. I: Well, now this laptop is back online, can I get guaranteed that she will get A+ in mathematics in this week’s quiz? Wife: Sure, I promise. I: Fantastic. After saying that I started to look at my database corruption and my wife interrupted me again. Wife: Btw, I forgot to tell you. Our daughter had got A in mathematics last week but she had another quiz today and she already have received A+ there. I kept my promise. I looked at her and she started to walk outside room, before I say anything my phone rang. DBA from eCommerce company had called me, as he was wondering why there is no activity from my side in last 10 minutes. DBA: Hey bud, are you still connected. I see um… no activity in last 10 minutes. I: Oh, well, I was just saving the world. I am back now. After two hours I had fixed the database corruption and everything was normal. I was outsmarted by my wife but honestly I still respect and love her the same as she is the one who spends countless hours with our daughter so she does not miss me and I can continue writing blogs and keep on doing technology evangelism. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Humor, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • Would it be possible to make an android app like this?

    - by ThisBetterWork
    I'm fairly new to android development and I'm not sure if the functionality I have in mind for my next project is actually feasible. I wanted to make a simple study guide app...when a user is browsing the web on their phone and they come across information they want to save to their study guide they would be able to highlight the sentence,long-click the highlighted text, and see an option to add it to their study guide(a pop-up list would appear). there would be more functionality than just this, for instance with-in the app you could create different study guide topics (biology,math, English..ect). But in general is it possible to have an app that is accessible by long-clicking when your browsing the web (as opposed to opening the App manually in order to use it.) -- If not, could I make it so you can open a browser within the app to do what I've described? This is going to be a school project so I don't care if it's totally original, I just want to make something simple and practical for practice. -- Thanks in advanced to anyone who helps!! :D

    Read the article

  • Crawling for geotagged data

    - by abe3
    I have no experience with web crawlers -- but I know that Apache maintains an open source web crawler called "Lucene." How would I go about writing such a crawler to search the web for geo tagged data close to a particular location? What would a general road map look like? How do I pick which slice of the web to crawl? Do I use regular expressions to find things that look like longitudes and latitudes? What does a general sketch of that solution look like?

    Read the article

  • Does C++ support subtyping?

    - by the_naive
    I know it might be a silly question to ask, but I didn't quite get an a absolute clear answer on this matter, so I thought I'd put it here. Does c++ support the subtyping in the sense that it fulfills Liskov's principle fully? I understand how parametric polymorphism, inclusion polymorphism(subclassing and overriding) work in c++ but I'm not entirely sure or understand if subtyping exists in the context of C++. Could you please explain?

    Read the article

  • What exactly is bootstrap admin-template and how it is supposed to be used

    - by Leron
    So this is my second ASP.NET MVC 4 project. It's decided that for this one we will use this template and it was said in a way that I felt really stupid for not knowing how exactly this template will help us and what exactly we gain by using it. I'm used to using HTML/CSS for the UI combined with jQuery. Now it seems that instead of jQuery we will be using bootstrap which as far as I understand is just another JS library created from twitter, so if that's it then this part is clear. What I really need to clarify for myself is what exactly this theme is used for, what is offering, why one would want to use such a theme? From what I see in the live demo maybe it's just a stack of premade controls that you can use in the front end along with bootstrap.js and maybe I'm just confused because on the page is shown as much as possible just for presentational purposes. If that's right, still I wonder where I can find info for the current theme, the controls that it offers and the functionality that I get and not least - how to use it. But still those are just my assumptions. What I really need is a clarification on what exactly is this theme for, what is the advantage using it, is there a good tutorials about how to use such themes in the context of ASP.NET MVC 3+. Also any additional info about this theme and generally on using themes in ASP.NET MVC will be much appreciated.

    Read the article

  • structure problem in Relational DBMS creation

    - by Kane
    For learning and understanding purpose, I currently want to try to make a small relational DBMS with simple features like (for now) only sequential reading/writing and CREATE TABLE, INSERT, SELECT, UPDATE and DELETE management. I am currently on the "think" part of the project and I am stuck on the way to store the read data in memory. First I was thinking of putting them properly on a structure, but the problem is that tables are all different, know the type of each column is not an issue, but I am not sure C provide a way to make fully dynamic structure. My second and current idea is to make a simple char array of the required length and just get the data by order with cast. But I am not sure if it is the good way to do that part, so I wanted to ask for your opinion and advices about that. Thanks in advance for your help. nb: I hope my question is enough clear and understandable, I still lack of pratice in english

    Read the article

  • " this kernel required an X86-64 CPU, but only detected a i686 CPU"

    - by jy19
    I recently decided to use Virtualbox to run Ubuntu, but I get the message this kernel required an X86-64 CPU, but only detected a i686 CPU I've already enabled virtualization in BIOS, but that doesn't seem to work. Many other solutions suggest that I should download the 32-bit version, and not the 64-bit. I'm not sure about that though, since my computer clearly says "64-bit operating system" under systems. But I might just be mistaken.

    Read the article

  • Lenovo W530 microphone problem

    - by user214245
    Lenovo W530 running Xubuntu 13.10 The microphone appears not to be working. 2 tests made one with audacity and a second with skype. In both instances there appears to be no input. 'Input devices' in the volume control module, also 'recording' indicates background static only. I have opened alsamixer and ensured that everything including microphone boost is set to high. I have tried the changes to alsa-base.conf without success.

    Read the article

  • Ubuntu 12.04 LTS won't install - never finishes please help

    - by Richard Higgins
    Want to try Ubuntu after using Windows for 30 years. Tried to install it 5 times on a Lenovo X120e notebook and twice on a Lenovo M57 desktop. No luck, worse than what Microsoft puts you through. I burned 12.04 LTS to disc. It installs up to the "Who Are You?" screen, then stops. Accepted the recommended computer name and lower case user name. I chose "log me in automatically." After that there is no progress bar, no rotating or pulsing button, nothing to indicate the Ubuntu has not died or fallen asleep. Is that how it is written? Never heard of a program that would take a long time to install while a user looked at a locked, dead screen. I just bought the M57 desktop for my son. It came with Ubuntu 10 something. I wanted to upgrade to 12.04 but it crashed, twice, to a DOS screen saying the pc lacked a certain "init" file. Various help screen commands did not help. On the X120e, I thought a partial-failed Ubuntu install was causing the problem, so I removed the drive and deleted the Ubuntu partition and replaced it. But same result. After I fill in my name, accept computer and user name, the "continue" button does not appear to work. I can go "back" but not forward. I have waited torturous hours. It doesn't take more than two hours to install, does it?any It is my own fault because of the high expectations I had for a sensible, hassle-free installation, but I am immensely disappointed. Thank you for any response

    Read the article

  • Apache Virtual Host setup not working?

    - by user214243
    I had follow this link to setup my first virtual host with apache2 under ubuntu 12.x. Looks easy but is not working. [How to][1] My internal dns can resolv the name, but my browsers is not showing me my webpage. from my lan, Im using ubuntu server no GUI. Every time I point to my virtual host name, I receive apache default page, I cannot see my custom page. My docs are under /home/mydomain/public_html This is my settings: ServerAdmin webmaster@localhost ServerName example.com DocumentRoot /home/example.com/public_html Options FollowSymLinks AllowOverride None Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all The rest of the file is the same. No, I even try to change the port from *:80 to *:81, restart and don't see apache listen to port 81. My localDNS running in other machine works. What I forget?

    Read the article

  • Changed isp, Ubuntu 13.04 won't connect to the internet

    - by Lori
    I recently moved and changed internet service providers. my ubuntu 13.04 machine is unable to connect to the internet. I need help with the networking settings. The previous isp was Verizon dsl, current a cable company. Both connect via ethernet cable. The cable and router work on a windows machine, but not my ubuntu machine. The cable company doesn't support ubuntu or any linux operating systems. The computer seems to recognize the connection. When I unplug and plug in the cable I get a little window that says disconnected, connected. However, I can't connect to the internet in either Firefox or the Ubuntu software installer (tried this to see if it was a firefox issue, it wasn't). I tried shutting down and restarting, plugging and unplugging cables, etc.

    Read the article

  • How do I compare the md5sum of a file with the md5 file (that was available to download with the file)?

    - by user91583
    Images are available for a distro on http://livedistro.org/gnulinux/israel-remix-team-mint-12. I want to use the 32-bit version. I have downloaded the ISO file for the 32-bit version (customdist.iso). I have downloaded the md5 file for the ISO file (customdist.iso.md5). I want to calculate the md5sum of the ISO file and compare it to the md5 file. I can use the md5sum command to display within the terminal the calculated md5 for the ISO file. I have searched the web and can't find a way to compare the calculated md5 for the ISO file with the downloaded md5 file. So far, the closest I have come is the command md5sum -c customdist.iso.md5 from within the folder containing both the files, but this command gives the result: md5sum: customdist.iso.md5: no properly formatted MD5 checksum lines found Any ideas?

    Read the article

  • Librated error when creating partition table

    - by Marko
    I bought a Dell Inspiron 5521 laptop a few days ago that came with Ubuntu preinstalled. I haven't used Ubuntu yet, and I don't have any experience in using it. I wanted to install Windows 7 64-bit on my laptop alongside Ubuntu, and made two bootable USB drives with Gparted and Windows 7. There wasn't a suitable partition on my laptop in which I could install Windows 7. I've read the instructions for using Gparted to create or manage my hard drive. I inserted the USB, booted from BIOS, and followed the procedure in installing Gparted. Then I entered Gparted, and the following error occurred: Librated error when Creating partition table. It asked me to click on either OK or Cancel. Either way I had my hard disk shown to me in the user window, in partitions that were made by the manufacturer: Partition File sys Label Size Flags /dev/sda1 fat32 dellutility 300.00 Mib diag /dev/sda2 fat32 os 3.00 Gib lba /dev/sda3 ext4 912.46 Gib boot /dev/sda4 extended 15.75 Gib (had a subpart) /dev/sda5 linux-swap 15.75 Gib ...and a option to switch to dev/sdb that's unused and of capacity 3Gib. I've used the biggest partition 912.46 Gib, and tried to reduce its size, and clicked OK. Then when I tried to make a new partition, it said it can't make any more partitions, no more than a maximum of 5. I would like to keep Ubuntu and slowly learn, but I also need to use programs that work in Windows. Thank you for taking the time to answer my question.

    Read the article

  • Colored Vertical Lines upon boot and nomodeset DOES NOT fix it

    - by user2851032
    I have installed Lubuntu 13.04 on a Dell Inspiron 1501 laptop, rebooted the machine and encountered this problem. I edited the GRUB configuration to remove "quite splash" and enter "nomodeset", updated grub, and everything was fine. I could reboot the machine without any trouble. However, if I unplug the machine, wait a few seconds, and plug it back in, the problem with the colored lines comes back and nomodeset no longer helps to solve the problem. I tried using radeon.modeset=0 instead of nomodeset and that also works on multiple reboots until I unplug the machine and plug it back in. I was finally able to get around the problem by entering "radeon.exapixmaps=0" instead of radeon.modeset=0. I suppose I kind of made up that boot option using some information from an Arch Wiki page. This would work throughout reboots and even if I unplugged the laptop. It was working fine for quite a while. A few weeks later, I had some unrelated issues with the Java iced-tea plugin, and since 13.10 had just come out, I thought I would try upgrading. So upgrading didn't fix the problem with Java, and after unplugging the machine and trying to use it later, I was back to this problem with the black screen and colored vertical lines. I am completely out of ideas on what to try. It took me a week to figure out how to get it working the first time, but the solution I had isn't working anymore.

    Read the article

  • What package do I need to build a Qt 5 & CMake application?

    - by Kevin Reid
    I'm trying to build sdrangelove, which wants Qt 5 and uses CMake for its build system, on Ubuntu 13.10. What package do I need to install to give it the file it's asking for here? There are a lot of *qt5* packages, and I've tried installing the promising looking ones to no effect. All the discussions I've found either have things working fine or are talking about writing CMake build rules rather than executing them. I don't have a lot of experience with the organization of Debian/Ubuntu packaging. CMake Error at CMakeLists.txt:14 (find_package): By not providing "FindQt5Core.cmake" in CMAKE_MODULE_PATH this project has asked CMake to find a package configuration file provided by "Qt5Core", but CMake did not find one. Could not find a package configuration file provided by "Qt5Core" (requested version 5.0) with any of the following names: Qt5CoreConfig.cmake qt5core-config.cmake Add the installation prefix of "Qt5Core" to CMAKE_PREFIX_PATH or set "Qt5Core_DIR" to a directory containing one of the above files. If "Qt5Core" provides a separate development package or SDK, be sure it has been installed.

    Read the article

  • How to install Oxford Advanced Learners' 8 in ubuntu 12.04 LTS 64bit

    - by ioweyou
    I have bought Oxford Advanced Learners' 8 which come along with installation CD. In the cd they have linux installation option. But i can't install that in my ubuntu. When i run setup.sh from my terminal i get the following error message: The setup program seems to have failed on amd64/unknown Fatal error, no tech support email configured in this setup Does anyone have idea about installing OALD 8 in ubuntu 64 bit os?

    Read the article

  • Installer doesn't recognise windows 7 install

    - by SirWaffleRaptor
    I will start off saying I searched a bit for this problem with little success. You see, I am an utmost noob when it comes to Ubuntu and Linux based OS (hence why I want to install it and discover it) and the thread I found were too specific for me to do anything with. Therefore, if you find a thread that is noob-friendly and answers my question, please link it below or please try to answer as simply as possible :) The problem: I want to install Ubuntu 12.04 LTS 64 bit alongside Windows 7 on my main hard drive (to get the choice which one to start when booting). Pop the CD in, reboot and get to the installer screen. I know I'm supposed to have 3 options, but I'm only given the option to erase my hard drive or "do something else". Therefore, my question is: how do I make Ubuntu recognise Windows 7, so it may install alongside it?

    Read the article

  • suspend not working

    - by Eric
    I am running 13.10 on an ASUS 101-SE netbook. Under "power settings" I have selected suspend when inactive for 10 minutes and suspend when lid is closed. I get a warning when inactive that the computer will suspend due to inactivity, but it does not suspend either from that condition or when closing the lid. I seem to be getting multiple suspend messages as I need to click "cancel" or "OK" many times to get the error window to close when it has been inactive for some time. Anyone have any tips? Thank you.

    Read the article

  • Wireless connect- Webcam activation- MBR repair/rebuild

    - by Rick
    Evening: I've NEVER had so much difficulty with Ubuntu. I got "Ubuntu Made Easy" and couldn't believe it hasn't done a damn thing to help solve the problems!!! #1. Since install of 12.04 I haven't been able to connect to wireless. Have done everything I can find/think of. Laptop indicates it's receiving wireless. Ran all updates, restricted extras, etc. NOTHING!! Tried to find how to activate built-in webcam (it worked when I installed O.S.) NOTHING; tried to find MBR repair/rebuild terminal command.. NOTHING!!! The book has has been useless, so far!! I really have to solve these problems, otherwise laptop and UBUNTU are worthless!!! Hope someone can help me out with any or all the problems I've listed. Sure would appreciate it!!!!!!!!!!! (laptop HP 2000-210US) Thanks: Rick

    Read the article

  • ASUS VX-6 Laptop Wireless not connecting

    - by user2152790
    Someone posted a script a couple days ago, here is my output.Pastebin I can see wifi SSIDs in network, but cannot connect to mine. The only time wifi worked on 13.10 was in the Live CD, but wifi stopped working as soon as install process started. Did below but made no difference. sudo apt-get install bcmwl-kernel-source sudo modprobe -rv brcmsmac sudo modprobe -v wl What I do next? I tried Software&Updates and it showed 1 proprietary driver in use. This sounds like a WPA/WPA2 issue? Wifi works when I tried Zorin OS 7.1, wifi always worked in windows 7.

    Read the article

  • Netbeans doesn't start, Java fatal error, unless sudo

    - by elect
    Fresh 13.10 64b Openjdk 6 is there, I just installed Netbeans 7.01 from the repo, but it doesn't work, I open then a console elect@elect-desktop:~$ netbeans # # A fatal error has been detected by the Java Runtime Environment: # # SIGSEGV (0xb) at pc=0x00007faebdf79325, pid=5251, tid=140388628424448 # # JRE version: 6.0_27-b27 # Java VM: OpenJDK 64-Bit Server VM (20.0-b12 mixed mode linux-amd64 compressed oops) # Derivative: IcedTea6 1.12.6 # Distribution: Ubuntu Saucy Salamander (development branch), package 6b27-1.12.6-1ubuntu2 # Problematic frame: # C [libgobject-2.0.so.0+0x14325] g_cclosure_marshal_BOOLEAN__BOXED_BOXEDv+0x985 # # An error report file with more information is saved as: # /home/elect/hs_err_pid5251.log [thread 140386948781824 also had an error] # # If you would like to submit a bug report, please include # instructions how to reproduce the bug and visit: # https://bugs.launchpad.net/ubuntu/+source/openjdk-6/ # /usr/share/netbeans/7.0.1/bin/../platform/lib/nbexec: line 548: 5251 Aborted (core dumped) "/usr/lib/jvm/java-6-openjdk-amd64/bin/java" -Djdk.home="/usr/lib/jvm/java-6-openjdk-amd64" -Djava.library.path=/usr/lib/jni -classpath "/usr/share/netbeans/7.0.1/platform/lib/boot.jar:/usr/share/netbeans/7.0.1/platform/lib/org-openide-modules.jar:/usr/share/netbeans/7.0.1/platform/lib/org-openide-util.jar:/usr/share/netbeans/7.0.1/platform/lib/org-openide-util-lookup.jar:/usr/lib/jvm/java-6-openjdk-amd64/lib/dt.jar:/usr/lib/jvm/java-6-openjdk-amd64/lib/tools.jar" -Dnetbeans.system_http_proxy="DIRECT" -Dnetbeans.system_http_non_proxy_hosts="" -Dnetbeans.dirs="/usr/share/netbeans/7.0.1/nb:/usr/share/netbeans/7.0.1/bin/../ergonomics:/usr/share/netbeans/7.0.1/ide:/usr/share/netbeans/7.0.1/java:/usr/share/netbeans/7.0.1/bin/../xml:/usr/share/netbeans/7.0.1/apisupport:/usr/share/netbeans/7.0.1/bin/../webcommon:/usr/share/netbeans/7.0.1/bin/../websvccommon:/usr/share/netbeans/7.0.1/bin/../enterprise:/usr/share/netbeans/7.0.1/bin/../mobility:/usr/share/netbeans/7.0.1/bin/../profiler:/usr/share/netbeans/7.0.1/bin/../ruby:/usr/share/netbeans/7.0.1/bin/../python:/usr/share/netbeans/7.0.1/bin/../php:/usr/share/netbeans/7.0.1/bin/../visualweb:/usr/share/netbeans/7.0.1/bin/../soa:/usr/share/netbeans/7.0.1/bin/../identity:/usr/share/netbeans/7.0.1/bin/../uml:/usr/share/netbeans/7.0.1/harness:/usr/share/netbeans/7.0.1/bin/../cnd:/usr/share/netbeans/7.0.1/bin/../dlight:/usr/share/netbeans/7.0.1/bin/../groovy:/usr/share/netbeans/7.0.1/bin/../extra:/usr/share/netbeans/7.0.1/bin/../javafx:/usr/share/netbeans/7.0.1/bin/../javacard:" -Dnetbeans.home="/usr/share/netbeans/7.0.1/platform" '-Dnetbeans.importclass=org.netbeans.upgrade.AutoUpgrade' '-Dnetbeans.accept_license_class=org.netbeans.license.AcceptLicense' '-XX:MaxPermSize=384m' '-Xmx768m' '-client' '-Xss2m' '-Xms32m' '-XX:PermSize=32m' '-Dapple.laf.useScreenMenuBar=true' '-Dapple.awt.graphics.UseQuartz=true' '-Dsun.java2d.noddraw=true' '-Dsun.java2d.pmoffscreen=false' -XX:+HeapDumpOnOutOfMemoryError -XX:HeapDumpPath="/home/elect/.netbeans/7.0/var/log/heapdump.hprof" org.netbeans.Main --userdir "/home/elect/.netbeans/7.0" "--branding" "nb" 0<&0 Looking around, the second answer, here Vigintas Labakojis, points out something regarding permission, I just try sudo netbeans, it works.. Then I look for the ~/.cache/netbeans/ I dont have, I have instead ~/.netbeans/ Then I run his commands on those folder, it doesn't work.. It must be something else, do you have any idea? In any case, my log /home/elect/hs_err_pid5251.log is here

    Read the article

  • Cannot boot computer, help please :(

    - by Austin
    Ok so here is more descriptions, I REALLY NEED HELP! I installed Ubuntu on a disk (unsure of v. I can't check.. Computer is broke :/ ) I then burned the disk I restarted computer pressed f12 blah blah it came up, I pressed enter for English, I plugged an Ethernet card in for better connection, and then started the installation.... I did the basics, and I entered a host name, and a user name and pass all that, when it came to partition page, I presse enter for no and then it went back to the installation page, I pressed install again, and it brought me back, so I selected yes , it loaded an it asked what software to instal I selected sh ( it was first option and I didn't know which to do ) so after everything finished loading, my disk was ejected the process finish, I run my computer and it opens up in log in page on cmd script I didn't know it, so I ran disk again makin a user and pass to remember.... Going back to login thing I logged in, and all it did was say my username... I didn't know what to do from there, I looked online found nothing but grub stuff, so I went to "Advanced Ubuntu options" and then "(Recovery Mode) and went to update grub... In middle o loading it asked to continue (Y/n) I typed Y and it finished, it went back to the options located in (Recovery Mode) and I closed it, and it loaded... And then showed up in another script screen, saying a paragraph on top, and on left side ( where login: would be located etc. ) it says "Grub" and I don't know what to type, if I turn off computer and turn back on it just goes straight to that again... PLEASE HELP:(

    Read the article

  • Duplicate (Spotify) Icon in launcher

    - by user191231
    I have installed spotify on Ubuntu 13.04 and have locked the icon on the launcher. But when I exit the program fully or even restart and use that icon to open spotify, a new icon is created or a different icon is generated with a ? on it. It is a clean install of Ubuntu 13.04 so was wondering if this is a known bug or if there was a way of making sure it just doesn't created a duplicate icon? N.B it has not happened as of yet to any other program I have installed (Chrome & Steam)

    Read the article

  • In 13.04 using Unity Tweak Tool hot corners stops working after reboot

    - by Sanseriff Sanseriff
    I have 13.04 64 bit Ubuntu installed and I'm using Unity Tweak tool to enable hot corners everything works as it should as long as I don't reboot as soon as I do hotcorners stops working. In order to get them functioning again I have to open the tweak tool and turn hotcorners off and then back on after every reboot. This I admit isn't a huge issue but is annoying is there anyway to get hotcorners to work properly after reboot with out having to reset them every time?

    Read the article

< Previous Page | 144 145 146 147 148 149 150 151 152 153 154 155  | Next Page >