Monthly Archives

Articles indexed in September 2012

Page 151/470 | < Previous Page | 147 148 149 150 151 152 153 154 155 156 157 158  | Next Page >

• What does pidgin mean by "Host unknown"?

  - by Mr. Jefferson

  Pidgin is telling me my XMPP account was disconnected; the error message is "Host Unknown". What specifically does this indicate? Can it not find the server it's supposed to connect to (one in my office)? I can ping the server in the "Domain" account setting (under Basic) without a problem, and I even tried specifying an IP address in the "Connect server" account setting (under Advanced) without success.

  Read the article

• DNS Server Behind NAT

  - by Bryan

  I've got a Bind 9 DNS server sitting behind a NAT firewall, assume the Internet facing IP is 1.2.3.4 There are no restrictions on outgoing traffic, and port 53 (TCP/UDP) is forwarded from 1.2.3.4 to the internal DNS server (10.0.0.1). There are no IP Tables rules on either the VPS or the internal Bind 9 server. From a remote Linux VPS located elsewhere on the internet, nslookup works fine # nslookup foo.example.com 1.2.3.4 Server: 1.2.3.4 Address: 1.2.3.4#53 Name: foo.example.com Addresss: 9.9.9.9 However, when using the host command on the remote VPS, I receive the following output: # host foo.example.com 1.2.3.4 ;; reply from unexpected source: 1.2.3.4#13731, expected 1.2.3.4#53 ;; reply from unexpected source: 1.2.3.4#13731, expected 1.2.3.4#53 ;; connection timed out; no servers could be reached. From the VPS, I can establish a connection (using telnet) to 1.2.3.4:53 From the internal DNS server (10.0.0.1), the host command appears to be fine: # host foo.example.com 127.0.0.1 Using domain server: Name: 127.0.0.1 Address: 127.0.0.1#53 Aliases: foo.example.com has address 9.9.9.9 Any suggestions as to why the host command on my VPS is complaining about the reply coming back from another port, and what can I do to fix this? Further info: From a windows host external to the network >nslookup foo.example.com 1.2.3.4 DNS request timeout timeout was 2 seconds Server: UnKnown Address: 1.2.3.4 DNS request timed out. timeout was 2 seconds DNS request timed out. timeout was 2 seconds DNS request timed out. timeout was 2 seconds DNS request timed out. timeout was 2 seconds *** Request to UnKnown timed-out This is a default install of bind from Ubuntu 12.04 LTS, with around 11 zones configured. $ named -v BIND 9.8.1-P1 TCP Dump (filtered) from internal DNS server 20:36:29.175701 IP pc.external.com.57226 > dns.example.com.domain: 1+ PTR? 4.3.2.1.in-addr.arpa. (45) 20:36:29.175948 IP dns.example.com.domain > pc.external.com.57226: 1 Refused- 0/0/0 (45) 20:36:31.179786 IP pc.external.com.57227 > dns.example.com.domain: 2+[|domain] 20:36:31.179960 IP dns.example.com.domain > pc.external.com.57227: 2 Refused-[|domain] 20:36:33.180653 IP pc.external.com.57228 > dns.example.com.domain: 3+[|domain] 20:36:33.180906 IP dns.example.com.domain > pc.external.com.57228: 3 Refused-[|domain] 20:36:35.185182 IP pc.external.com.57229 > dns.example.com.domain: 4+ A? foo.example.com. (45) 20:36:35.185362 IP dns.example.com.domain > pc.external.com.57229: 4*- 1/1/1 (95) 20:36:37.182844 IP pc.external.com.57230 > dns.example.com.domain: 5+ AAAA? foo.example.com. (45) 20:36:37.182991 IP dns.example.com.domain > pc.external.com.57230: 5*- 0/1/0 (119) TCP Dump from client during query 21:24:52.054374 IP pc.external.com.43845 > dns.example.com.53: 6142+ A? foo.example.com. (45) 21:24:52.104694 IP dns.example.com.29242 > pc.external.com.43845: UDP, length 95

  Read the article

• Windows 2003 DC to Windows 2008 R2 DC with same name and same IP

  - by TheCleaner

  Environment = Windows 2003 native domain with 8 DCs I've got an old domain controller that is running 2003, CA Enterprise role, DHCP, DNS, a few GPO scripts that point to shares on it, and some other minor functions. All our servers point to it as their primary DNS, and there's lots of references to its IP or name throughout the domain at this point (8+ years later). I really don't feel like manually changing all of this, it would be a pretty massive undertaking. I want to follow this guide: http://msmvps.com/blogs/acefekay/archive/2010/10/09/remove-an-old-dc-and-introduce-a-new-dc-with-the-same-name-and-ip-address.aspx to hopefully end up with basically an "in-place upgrade" so to say. I considered just doing a P2V of the box, but we don't really want to keep it around running 2003 to be honest. I also considered using a CNAME and adding a 2nd IP (the old one) but again, it seemed like it would be cleaner using the attached link. My actual question: Any gotchas or big caution signs when doing what the link suggests? Anyone gone down this road and have advice on how to proceed?

  Read the article

• Store profile image of all users into single directory or per subdirectory id?

  - by Luccas

  I'm using amazon s3 as storage for users profile pic. I see that many websites generates large random filenames and put them into the same root directory like: http://xxx.us-east-1.amazonaws.com/aHR0cHM6Ly9mYmNkbi1wcm9maWxlLWEuYWthbWFpaGQubmV0L2hwcm9maWxlLWFrLWFzaDIvMjczMzkxXzEwMDAwMDMxMjAxMzg5OV81NTk3MjM4Mzdfbi5qcGc.jpg And my question is: What are the pros and cons of that approach? If I palce them into different directories, what problems I will have in future? http://xxx.us-east-1.amazonaws.com/users/id/username.jpg or http://xxx.us-east-1.amazonaws.com/users/id/random_number.jpg Thanks!

  Read the article

• having trouble setting up ganglia on three machines

  - by Pieter Breed

  I am running ubuntu 11.10 I have one machine with gmetad, gmond and ganglia-webinterface. When I browse the web interface this machine picks up the local gmond output. I then added another machine, running only gmond. I didn't really change anything in the config, only the name of the cluster. This machine's output showed up in the web view. The I tried to add a third machine, similarly to the second, but it's not showing up in the web view. I tried looking at syslog and running as a daemon, but I'm not seeing anything suspicious there. Any tips for trouble shooting this?

  Read the article

• Two mail servers, need help with dns configuration for the backup one

  - by user92231

  I need to run a redundant backup mail server in case the main one goes down. The settings in GoDaddy look something like the following: A (Host) Host Points to @ ip address of mail1 41.x.x.x mail1 ip address of mail1 41.x.x.x mail2 ip address of mail2 196.x.x.x MX Priority host points to 10 @ mail1.mydomain.com 20 @ mail2.mydomain.com When mail1 goes down, mail2 is able to get emails. I can access it through the browser with no problem, but I want my users to able to pop3/smtp as well without changing anything in their outlook. I dont want any impact to the users when mail1 is down. Also, I'm using the windows server DFS to keep both folders of the mails in sync. Is this the right way, or should I be using something else?

  Read the article

• Update BIOS on Sun Fire X4150 server

  - by Massimo

  I have some Sun Fire X4150 servers with a very old BIOS release (1ADQW015), which seems to have some compatibility problems with WMware ESX Server 3.5 and Windows 2008 R2 virtual machines; so I want to update the BIOS on them. The problem: according to this page, if your servers run ELOM (mine do), you first need to update to the latest ELOM release, then to the interim transition release, then finally you can update to the latest one. Ok, I'm willing to do that... but it looks like Sun (now Oracle) will happily let you download the latest firmware DVD (3.3.0), but it will not let you download the transition release (2.0) if you don't have a support contract. Well, I actuall don't care at all about the servers' management controllers (we don't even use them), so upgrading from ELOM to ILOM is totally irrelevant to me; but I need to update the servers' BIOS. So my question is: can I update the servers' BIOS to the latest version without doing the full ELOM-to-ILOM migration, or will this not work (or even make the servers unusable)? Do BIOS versions and SP ones need to be matched, or can one be updated without bothering with the other? Bonus question: if this whole ELOM-to-ILOM thing actually is needed in order to update the BIOS, can that 2.0 CD-ROM be obtained without having a support contract with Sun/Oracle (which we are definitely not going to sign, being that quite old hardware)? Update: I tried upgrading only the BIOS on one of the servers, and it didn't boot anymore. So it really looks like a full firmware upgrade is needed, and the management controller and BIOS versions should be kept in sync. So... where can I find that *&!£%$% 2.0 CD-ROM? Or at least the transition firmware that can be found on it?

  Read the article

• What should I use to ping multiple IPs and get notified of time outs?

  - by HumanVirus

  I've been using MultiPing to ping hundreds of IPs (from access points and such) and check their performance (packet loss, latency) and uptime. The program is very easy to use, but I was wondering if someone could recommend me something that would work better and that would also work in Linux. The features I'm looking for are: Notification Types: At least desktop notifications and SMS, but it would be great if it also had e-mail, IM, or other types of notifications. (MultiPing has some of these, but they don't work too well.) Being notified about the root problem only: Since some devices are dependent on others, I'd like to be notified only about the root problem. E.g. Let's say I have A[x.x.x.222]B[x.x.x.33C[x.x.x.44]D[x.x.x.55], and B goes down, therefore C and D will also be down. Is it possible to get a notification only about B being down? Light on resources. Ideally multiplatform or at least available for both Linux and Windows. I've heard about Nagios and Shinken being used for monitoring. Would you recommend that I use something of the sort or would that be too much for my needs? If using Nagios, Shinken, or similar software is recommended, can anyone tell me what sites I should go to or what books I should get that would be good for someone who is totally new at this? I'd appreciate any suggestions.

  Read the article

• Linux USB to work as cd rom on mac

  - by user157483

  I am working in driver development in linux USB modules. I have written driver for usb and it is working as cd rom in windows machine 1)I made first partation as fat32 "modprobe g_hidmass file=/dev/mmcblk0p1 cdrom=1 stall=0 removable=1" this works fine in windows 2)I made first partation as hfs partation "modprobe g_hidmass file=/dev/mmcblk0p1 cdrom=1 stall=0 removable=1" but same thing i applied with hfs partation in MAC it is getting error like this "The disk you inserted was not readable by this computer" in diskutil it is shown as CD-rom but not reading the file system. frame like this Please help me how can I overcome this error...

  Read the article

• Dying SanDisk Memory Stick Pro Duo

  - by Different55

  I have a Memory Stick Pro Duo and after attempting to delete the largest file from a Mac the stick has become unusable. I can almost access it. When I put it in my PC I can open/delete/copy/paste/rename/modify one file/folder, then it can't detect the card. If I reinsert the card I can move on to the next file, but this is really annoying and my PSP won't read it at all. The memory card access light will flash for a really long time before it says that every file is corrupted. When I have tried to format it with either the PC, PSP, or a camera that uses a memory stick pro duo, it fails. I've tried with all the different options on windows, I tried formatting it through CMD, but nothing I have tried works. Should I copy every file off one by one or is there a way to fix it?

  Read the article

• Dell Optiplex GX620 > windows xp home addition OU7670

  - by Ren D

  My question is my Dell Optiplex 620 is not working properly !! when i turn it on it goes automaticaly to bios and says click on safe mode or safe network or best last start up or normal mode ?? but when i click on normal it comes back to that window then i click on safe mode and it works for about 5 min then it reboots its self every time what can i do ? i checked if there was a virus and its clean !! please help

  Read the article

• Mac OSX snow leapord move to folder on keystroke

  - by Georges Oates Larsen

  On a weekly basis I have to organize thousands of photos (in groups of up to five thousand) into folders depending upon what they contain (to then narrow them down to the best photos of the same thing). This means I am constantly scanning through photos and organizing them into a folder. THe problem is, the process of stopping my scan, then dragging the photo all the way into a folder myself is bogging me down. Would it be possible to, for instance using something like applescript, or even going so far as using XCode/Cocoa, to create a shortcut that moves whatever I have selected in the finder to a pre-specified folder? Does somethign like this already exist?

  Read the article

• Cannot boot from a hard drive

  - by Martin Melka

  I have a problem booting from a hdd. I used to have it as my main drive before I bought an SSD, so I had been able to boot from it. But for some reason, now, half a year later, I can't get it to work. I completely erased it, deleting data and partitioning (using EASEUS Partition Master), then I installed Kubuntu (without changing anything in the installer), but it simply won't boot up. It always boots the drive with Windows and when I unplug this drive, it only gives me an error "PXE-E61: Media test failure, check cable", I guess it's trying to boot from LAN. I tried installing the system on a freshly deleted drive, without any other drives plugged in the pc, but the problems persist. This is how the drives look now (first one has Windows 7 installed, the second one Kubuntu): I am lost. I mean, after doing a fresh wipe and a clean install without altering anything, it should work. But it doesn't. What can be wrong here? Thanks

  Read the article

• How do I install and use Window Virtual PC in Windows 8?

  - by KronoS

  I really like the integrated Virtual Machine that Windows had built-in with Windows 7 with Windows Virtual PC. I'm looking to install that again. I'd like to be able to install multiple machines as I did before (XP, Ubuntu, Etc,.) but I can't seem to find Windows Virtual PC for Windows 8 any more. Is it still available?, and if not was there something setup in place to replace it? How do I use it?

  Read the article

• Send Gmail emails from Facebook address

  - by Mikulas Dite

  Is it somehow possible to link Facebook address each username is given to Gmail? Obviously, there is the "Accounts, Send mail as" feature, but that used to return an error ... Final-Recipient: rfc822; [email protected] Action: failed Diagnostic-Code: smtp; 550 5.1.1 RCP-P2 http://postmaster.facebook.com/response_codes?ip=209.85.210.181#rcp Refused due to recipient preferences You have requested to add [email protected] to your Gmail account. Confirmation code: XXXXXXXX ... The XXX part is actually how the email actually reads, the daemon does in fact obfuscate the code prior to sending it back. I tried again recently, but Facebook mailer does not even return the error message nowadays (alas, it doesn't show in the message center either). So, is there a way to link those to services nowadays?

  Read the article

• Excel Countif external date

  - by Duall

  I am making an Excel 2010 spreadsheet to log support calls, services, and installations that each member would fill out. Due to being paid by job rather than by hour, there is a need for it to count each of these ("Call", "Service", "Install") there is in any given time span. The entry of the data itself would be in Sheet 1, and then a 'splash screen' of sorts would be in Sheet 2. Here I would like to be able to put a date range and it would display how many of each there is. I already can do the COUNTIF statement, =COUNTIF(Activity!$B:$B,"Call") but I don't know how to: a) Add in the prerequisite for a date so it only gets "Calls" within a certain time frame. b) Take the date it looks for from a cell on the splash screen.

  Read the article

• word 2010 caption list

  - by M-Sepehry Rad

  I created a document by word 2010 in which I inserted captions for pictures and cross reffernec. I saved the document in my computer and emailed it to a colleague. When she opened the document in her computer, the caption list ( numbers which were cross referenced to pictures ) was not avaiable and she was not able to add refference to a picture or change an existing cross refference. It seems that caption list is only avaiable in the computer which the document is created.

  Read the article

• Windows 7 - How to access my documents from Windows 8 (dual boot)

  - by msbg

  I am dual booting Windows 7 and Windows 8 on two different partitions of the same drive: Win7: (C:) Win8: (D:) I am trying to get access to my Win7 user folder (C:\Users\Mason) in order to access my Win7 documents folder (C:\Users\Mason\Documents) from Windows 8. When I try to on Windows 8, I get an error message saying "You don't have permission to access this folder. Click here to permanently get access to this folder". When I click, the progress bar in Windows Explorer slowly moves to the maximum and disappears. When I try opening the folder, I get the same error message. When editing security permissions for the folder in Windows 8, Explorer freezes. I do not know how to remove the restrictions from Windows 7. I checked the Windows 8 user folder (D:\Users\Mason) and it had the group or user name: "S-1-5-21-936898901-3363470404-1273668825-1001". I tried copying and pasting it into the Win7 User Folder Permissions, but got the error "An object with the following name cannot be found". How would I access my folders?

  Read the article

• Video conferencing software that allows a participant to mute individual users

  - by Chris Dutrow

  Have a few people working in an office and then a few more people working from home. We would all like to video chat skype-style, but for the people in the office, everything that is said by someone in the same room "echos". The echo is because the hear it one time through the actual air, and then again through their headphones or speakers: Unsure of the best way to solve this problem, but one way seems to be to use an application that enables the user to mute audio from another participant. Then the people in the office could mute all audio from other people in the same room, thus removing the echo effect. Any suggestions or ideas? Thanks so much!

  Read the article

• Can't open Control Panel or IE

  - by Josh

  I have a XP computer where when ever I try to open Control Panel nothing happens, nothing flashes on the screen. Same thing with Internet Explorer. I've scanned the computer with Malwarebytes and Avast, Malwaresbytes found some Adware which it removed without problems. Avast found nothing. I looked at the running processes with Process Explorer, nothing malicious running. And looked at a Process Monitor output when I tried to run IE, nothing obviously wrong. The process just decides to exit. What can I try next? I would suspect corrupt IE install but Control Panel doesn't work either. UPDATE: Nether work in Safe Mode under the user account. (only 1 user on the computer) But in Safe Mode, under the built in Administrator account, they work. So what ever is broken, is only broken in the one account. Anything under the HKCU registry key that could break this?

  Read the article

• Memory Usage by Mapped Files (Win7 64Bit)

  - by Dexter

  When copying files from/to my external USB3 HDD memory usage in Win7 goes up to 100% and remains there. I'm not sure whether this is a problem caused by faulty drivers or not, but I already have the current version of them (Etron USB3 controller on a Gigabyte 990fxa board).. Using RAMMap it becomes obvious that the files, that are to be copied, are mapped into memory. Clicking on Empty > Empty System Working Set seems to temporarily fix the problem (without causing any trouble with the file copy process), but it needs to be done every few seconds. Is there any way to schedule this operation to happen ever 10 or so seconds on its own? What underlying system command is RAMMap using? Or, alternatively, is there any way to limit how much RAM mapped files may use in Windows 7? I know mapped files would usually be removed from memory if other programs need the memmory, but while memmory usage is at 100% the system starts freezing up for half a second or so everytime I click anything .. thus the automatic removal of unused memory contents seems to be failing here.

  Read the article

• Extracting Windows 8 Start Screen Patterns

  - by oreon

  Is there any way to extract the Windows 8 Start Screen patterns, in order to use them as standalone wallpapers on other systems? For example see this screenshot: I am interested in the dark blue background. I heard that this background is somehow adapted to your chosen color theme. So many different variations should exist. Engadget has an article here briefly talking about these background patterns and the different color schemes. They call them "personalization tattoos".

  Read the article

• How to save a ntfs partition which suddenly became empty

  - by SteveO

  One ntfs partition of my laptop was suddenly wiped out without any notice to me, when I rebooted from Windows 7 to Ubuntu 12.04 today. I am in need of help to save my files on that partition, which are important and unfortunately haven't been backed up yet. My laptop has two operating systems: Windows 7 and Ubuntu 12.04. with a ntfs partition shared between the two operating systems for storing some data files (109GB, about 97%of which has been used). I have almost always been using Ubuntu, but today I happened to have to work under Windows. Following is a record of what happened in the time order, numbering according to which operating system I was in at each stage. When I started into Windows 7, right before being able to log in, it took a while and two reboots to configure the Windows. I thought it was normal, since last time when I was using Windows two weeks ago, it took very long and several reboots to update Windows, since the last time I used Windows before then was in November last year. Then after finally being able to log in Windows 7, I installed Libre Office, MathType (I got it from http://dl.portablesoft.org/down/?id=2515, which I originally thought was a trial version, but later I learned was a cracked version and felt wrong. I made a copy of it at dropbox http://dl.dropbox.com/u/13029929/MathType_6.8_PortableSoft.rar, not for distributing it but to list it there just in case it will help to identify the problem), and MikTex. I then edited some .doc files in the ntfs partition under both Microsoft Office with MathType, and Libre Office. When I finished working under Windows and rebooted into Ubuntu, Ubuntu did some filesystem checking and reported that the ntfs partition was not able to be mounted. Then I rebooted again into Windows, and found that the ntfs partition had been emptied, i.e. all the data files were gone, and only one system file bootsqm.dat and one system directory System Volume Information were there, with their last updated time being the time when I first rebooted from Windows to Ubuntu (in fact, it is 4 hours in advanced than the actual time of that rebooting , see immediately below) Also I noticed that the time shown by Windows is not correct for my time zone (UTC-05:00) Eastern Time (US & Canada)), which is 4 hours in advance than the correct time (my current time is 3am, but the computer shows 7am). Same things happened when I rebooted into Ubuntu again: the ntfs has been emptied and left with only one Windows system file bootsqm.dat and one Windows system directory System Volume Information. the time shown by Ubuntu is 4 hours in advance than the correct time. I wonder what I can do to retrieve my data files back on the ntfs partition? If I am not able to do it myself, will some professionals be able to help me out? Thanks a lot! PS: I didn't think I did any thing that required emptying that partition. But there were quite some works I did during that stage right before the reboot from Windows to Ubuntu when the problem occured. Did I make any mis-operation?

  Read the article

• How can I automatically switch audio to my speakers when my TV-as-2nd-monitor is not in use?

  - by Michael McGowan

  I have a normal LCD monitor as my primary monitor and an HD LCD television as a 2nd monitor (connected through HDMI). I also have a set of normal speakers for the computer (a Windows 7 machine) that I previously used (before I was using the TV as a 2nd monitor). When I am using the TV as a 2nd monitor, I would like audio to come from it. However, I'm oftentimes using the TV as a TV, in which case I would like the audio from my computer to come from my speakers. Is there any way to accomplish this? It seems that if I have the TV set up as the default audio, then even if I turn the TV off (or, more likely, to the input from my cable box), then the audio still goes through that rather than my speakers. Is there a solution that does not require me to manually change the settings every time I want to switch contexts?

  Read the article

• Batch processing multi-TIFF in Irfan view

  - by hemalshah

  I have to convert DPI of more than 5k Tiff images on a monthly basis from 200x200 to 100x100. I can do that in Irfan view using a .bat file that i have created.. the following is the .BAT file code @"c:\program files\irfanview\i_view32.exe" "e:\batch1*.tif /aspectratio /resample /tifc=4 /dpi=(100,100) /convert=e:\batch2*.tif" %* Where tifc=4 is Fax 4 compression However, the above code doesn't help me change the DPI for other pages except for Only the first page in the tiff thats getting converted to 100 DPI. Rest all pages are still 200 DPI. I am using WinXP Professional and Irfan View. Can anyone tell me what I am missing. Or any other alternative program where I can create a .bat file and run the batch process using Command line?

  Read the article

< Previous Page | 147 148 149 150 151 152 153 154 155 156 157 158  | Next Page >