Monthly Archives

Articles indexed in March 2012

Page 162/239 | < Previous Page | 158 159 160 161 162 163 164 165 166 167 168 169  | Next Page >

• Can't ping devices by IP address for devices allocated IPs by DHCP

  - by GiddyUpHorsey

  I have a home network with a Trendnet wireless router and a Windows Domain. The Domain Controller/DNS server is a Windows 2000 Server and is configured to forward queries to DNS servers provided by the ISP. The router provides DHCP and is configured with the Windows 2000 Server as the DNS server. The network has been set up for a couple of years and usually works fine. When I connect iPhones to the network over WiFi, the router can ping the iPhones through its browser based admin interface, but Windows machines that are part of the Windows Domain cannot. A laptop was connected to the network over WiFi that wasn't joined to the domain and it could see the iPhones. The router UI shows that the laptop has a reserved IP allocated via DHCP. All machines either have a static or DHCP allocated IP on the 192.168.0.* subnet. Router - 192.168.0.1 - Static - Wired Windows Domain Controller - 192.168.0.8 - Static - Virtual Windows 7 Workstation - 192.168.0.200 - DHCP Auto - Wired VMWare ESXi Host - 192.168.0.201 - Static? - Wired iPhone 1 - 192.168.0.202 - DHCP Auto - WiFi iPhone 2 - 192.168.0.203 - DHCP Auto - WiFi Windows Vista Laptop - 192.168.0.204 - DHCP Reserved - WiFi Using the Windows 7 machine (200), I try to ping each machine and the only DHCP machine that responds is itself. The other DHCP machines fail with Reply from 192.168.0.200: Destination host unreachable.. Using nslookup fails with *** domain.controller.name can't find 192.168.0.203: Non-existent domain. Using the Windows 2000 Domain Controller (8), I try to ping each machine and the only DHCP machine that responds is the Windows 7 machine (200). Pinging the other DHCP machines fails with Request timed out.. Using nslookup also fails with *** domain.controller.name can't find 192.168.0.203: Non-existent domain. Using the iPhone 2 (203), I try to ping (Network Ping Lite) the machines with static IP addresses and that works fine. When I try to ping the Windows 7 machine (200) it is unable to get a response. How do I configure the DNS server/Windows Domain/Router properly so that the Windows Domain machines can see the IPs allocated via DHCP?

  Read the article

• How to get my external IP address (over NAT) from the Windows command-line?

  - by Diogo Rocha

  The Windows "ipconfig" command can only show me the parameters from the Ethernet interfaces from my machine (even with the "ipconfig /all" argument). It can show detailed information about the interface, but it will never show me my external IP address over a NAT network. However, there are several websites, such as "What is my IP address" that can get and show my external IP address. So I'm wondering, is possible to get this value externally? Should I expect that there is some way to get this information from a command line at my local machine... I need to get this value to log on an application that I'm doing with VBScript. There is some way to do this, from a "cmd" on Windows?

  Read the article

• How do I create an ad hoc network in Windows 8?

  - by George Edison

  For the life of me, I can't figure out how to create an ad hoc wireless network in Windows 8. Here is what happens if I follow the steps from Windows 7: Right click the network icon and click "Network and Sharing Center": Click "Set up a new connection or network": Where is the option to create an ad hoc network? Therefore I have two related questions: Did I miss something? Is it in there somewhere and I just haven't found it yet? If this feature is not available, is there a tool somewhere I can use that provides this capability? Further information: I have an Intel Wireless WiFi 4965 AGN adapter. I tried the Intel PRO wireless tool and it didn't offer an ad hoc option.

  Read the article

• How can I create an Computer Icon on Windows 8 Server Beta's Desktop?

  - by bernd_k

  For some bad reason Microsoft decided to remove all standard desktop icons besides the Recyle bin. It is easy to create shortcuts to each single disk using create shortcut method. But I would like to have the computer icon too. I guess there will be an increased demand to create useful shortcuts on Windows 8 Servers Desktop, because the metro surface 'on the backside of your screen' is just impractical.

  Read the article

• How to Create a Custom Ubuntu Live CD or USB the Easy Way

  - by Chris Hoffman

  There are several different ways to create custom Ubuntu live CDs. We’ve covered using the Reconstructor web app in the past, but some commenters recommended the Ubuntu Customization Kit instead. It’s an open-source utility found in Ubuntu’s software repositories. UCK offers more powerful features than Reconstructor does, but Reconstructor makes most tasks easier for novice users. Be sure to take a look at Reconstructor, too. How To Be Your Own Personal Clone Army (With a Little Photoshop) How To Properly Scan a Photograph (And Get An Even Better Image) The HTG Guide to Hiding Your Data in a TrueCrypt Hidden Volume

  Read the article

• Microsoft et le Stade Toulousain mettent de l'IT dans leurs vêtements, quelles applications imaginez-vous pour ces nouveaux habits ?

  Bientôt de l'IT jusque dans nos vêtements Robe tweeteuse, T-Shirt promotionnel pour club de Rugby : quelles applications imaginez-vous pour ces nouvelles générations d'habits ? En collaboration avec Gordon Fowler « The Printing Dress » est une création de deux designers expérimentées travaillant pour Microsoft Research, Asta Roseway et Sheridan Martin Petit. Réalisée à partir de papier de riz noir et blanc, la robe intègre des boutons rappelant les touches des anciennes machines à écrire, cousus sur le corsage de la robe. Un ordinateur portable, un projecteur et quatre cartes de circuits y sont également intégrés. Bien qu'étant encore un prototyp...

  Read the article

• Le kit du bon développeur Rails, partie 3. Par l'équipe de Synbioz

  Dernière partie de notre série d'articles sur les gems à connaitre par un développeur Rails. Dans le premier article, nous nous étions attardés sur l'authentification, la recherche et la pagination. Dans la deuxième partie, ce fut au tour de l'internationalisation et de la gestion de fichiers. Dans ce dernier article, les gems concernant les tests et la gestion des tâches annexes seront à leur tour abordées.

  Read the article

• Help Convert Your Pipeline Opportunities Into Wins

  - by swalker

  Are you looking for an extra advantage to help convert your pipeline opportunities into wins?  The Buy Now, Pay Less for Oracle Hardware & Software  and the Oracle Database Appliance (ODA) Low Entry Payment offer simplified payment plans, with low promotional rates which represent the most affordable way for your accounts to acquire the systems they need now. With payments you grow your deals by selling into future years' budgets; and you mitigate your credit and collections risk - Oracle pays you on behalf of your customer, while your customer makes payments over time. Payments deliver the following benefits: Uncover hidden obstacles and shorten sales-cycles Access the financial decision maker Offer an alternate line of credit Differentiate or match your competition Offer an alternate line of credit to preserve scarce capital Don't wait for a request for financing from your account. Quote your business with these promotions proactively, before any requests. For more information on Oracle Financing for partners visit us at OPN or email [email protected]

  Read the article

• SOA Community Newsletter March 2012

  - by JuergenKress

  Dear SOA partner community member Thank you for your excellent feedback on the brand new Patch Set 5! PS5 is a combined release of all Fusion Middleware components. We recommend you to use this version for all your upcoming projects. We are very keen to know your feedback on PS5. We request you to please send it across to us, especially if your fist customers are in production. Edwin, Roland and Demed from product management published a joint paper Start Small, Grow Fast. Please let us know if you are interested to write a joint paper. Till we meet again! Till we meet again! To read the newsletter please visit http://tinyurl.com/soanewsMarch2012 (OPN Account required) To become a member of the SOA Partner Community please register at http://www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Technorati Tags: SOA Community newsletter,SOA Community,Oracle,OPN,Jürgen Kress,WebLogic 12c,SOA Implementation Assessment,BPM Implementation Assessment,SOA Certification,SOA Specialist,BPM Certification,BPM Specialist,SOA Suite for Healthcare Integration,SOA Community Forum,SOA Specialization

  Read the article

• Loading the Cache from the Business Application Server

  - by ACShorten

  By default, the Web Application server will directly connect to the Database to load its cache at startup time. Customers, who implement the product installation in distributed mode, where the Web Application Server and Business Application Server are deployed separately, may wish to prevent the Web Application Server to connect to the database directly. Installation of the product in distributed mode was introduced in Oracle Utilities Application Framework V2.2. In the Advanced Web Application Server configuration, it is possible to set the Create Simple Web Application Context (WEBAPPCONTEXT) to true to force the Web Application Server to load its cache via the Business Application rather than direct loading. The value of false will retain the default behavior of allowing the Web Application Server to connect directly to the database at startup time to load the cache. The value of true will load the cache data via direct calls to the Business Application Server, which can cause a slight delay in the startup process to cater for the architecture load rather than the direct load. The impact of the settings is illustrated in the figure below:                             When setting this value to true, the following properties files should be manually removed prior to executing the product: $SPLEBASE/etc/conf/root/WEB-INF/classes/hibernate.properties $SPLEBASE/splapp/applications/root/WEB-INF/classes/hibernate.properties Note: For customers who are using a local installation, where the Web Application Server and Business Application Server are combined in the deployed server, it is recommended to set this parameter to false, the default, unless otherwise required. This facility is available for Oracle Utilities Application Framework V4.1 in Group Fix 3 (via Patch 11900153) and Patch 13538242 available from My Oracle Support.

  Read the article

• John Hitchcock of Pace Describes the Oracle Agile PLM Customer Experience

  John Hitchcock, Senior Manager of Configuration Management at Pace (formerly 2Wire, Inc.), sat down for an interview during Oracle's Innovation Summit with Kerrie Foy, Manager of PLM Product Marketing at Oracle. Learn why his organization upgraded to the latest version of Agile and expanded the footprint to achieve impressive savings and productivity gains across the global, networked product value-chain.

  Read the article

• Why is purchasing Microsoft licences such a daunting task? [closed]

  - by John Nevermore

  I've spent 2 frustrating days jumping through hoops and browsing through different local e-shops for VS (Visual Studio) 2010 Pro. And WHS (Windows Home Server) FPP 2011 licenses. I found jack .. - or to be more precise, the closest I found in my country was WHS OEM 2011 licenses after multiple emails sent to individuals found on Microsoft partners page. Question being, why is it so difficult to get your hands on Microsoft licenses as an individual? Sure, you can get the latest end user operating systems from most shops, but when it comes to development tools or server software you are left dry. And companies that do sell licenses most of the time don't even put up pricing or a self service environment for buying the licenses, you need to have an hawk's eye for that shiny little Microsoft partner logo and spam through bunch of emails not knowing, if you can count on them to get the license or not. Sure, i could whip out my credit card and buy the VS 2010 license on the online Microsoft Shop. Well whippideegoddamndoo, they sell that, but they don't sell WHS 11 licenses. Why does a company make it so hard to buy their products? Let's not even talk about the licensing itself being a pain.

  Read the article

• Ord function implementation in Delphi

  - by Federico Zancan

  Purely as an exercise at home, aimed to better understand some language basics, I tried to reimplement the Ord function, but I came across a problem. In fact, the existing Ord function can accept arguments of a variety of different types (AnsiChar, Char, WideChar, Enumeration, Integer, Int64) and can return Integer or Int64. I can't figure out how to declare multiple versions of the same function. How should this be coded in Delphi?

  Read the article

• How do you deal with the details when reading code?

  - by upton

  After reading some projects, I find that it is not the architecture of the software that is really hard to know. It is not hard to figure out the architecture immediately if the project is clearly designed and implemented, if it's hard and never seen before, some day later I can find out some pattern similar to the one I read in the same domain. The difficulty is that the concepts and mechanism defined by the author are really hard to guess, and these concepts may spread in the whole project which makes it hard to grasp. The situation is normal and universal and you can ask questions to your colleague when in a company. However, it gets worse if nobody around you knows these details. How do you handle these details which block your reading?

  Read the article

• xmpp flow -server, client and library

  - by Him

  My complete requirement is development of a chat engine - including server, clients etc. Currently I am working on things at my desktop only but once done, I have to host it; basically incorporate it with in a site for chatting purpose. So, now my problem is: I am not clear about how the actual data flow is? I have googled and read about xmpp (a book by Peter Andre) also but I am not clear about the flow and what are the actual requirements to do the above mentioned task. What I currently know is: 1) I need a server - so selected ejabberd 2) I need client - still not sure which one to use and one other doubt is how this client thing will work when deployed on some website for chatting purpose. 3) Some library - don't know which one and what is the purpose? Can anyone guide me?

  Read the article

• Single-developer GIT workflow (moving from straightforward FTP)

  - by melat0nin

  I'm trying to decide whether moving to VCS is sensible for me. I am a single web developer in a small organisation (5 people). I'm thinking of VCS (Git) for these reasons: version control, offsite backup, centralised code repository (can access from home). At the moment I work on a live server generally. I FTP in, make my edits and save them, then reupload and refresh. The edits are usually to theme/plugin files for CMSes (e.g. concrete5 or Wordpress). This works well but provides no backup and no version control. I'm wondering how best to integrate VCS into this procedure. I would envisage setting up a Git server on the company's web server, but I'm not clear how to push changes out to client accounts (usually VPSes on the same server) - at the moment I simply log into SFTP with their details and make the changes directly. I'm also not sure what would sensibly represent a repository - would each client's website get their own one? Any insights or experience would be really helpful. I don't think I need the full power of Git by any means, but basic version control and de facto cloud access would be really useful.

  Read the article

• Which programming language for text editing?

  - by Ali

  I need a programming language for text editing and processing (replace, formatting, regex, string comparison, word processing, text analysis, etc). Which programming language is more powerful and has more functions for this purpose? Since I work PHP for my web projects, I currently use PHP; but the fact is that PHP is a scripting language for web applications, my current project is offline. I am curious if other programming languages such as Perl, Python, C, C++, Java, etc have more functionality for this purpose, and worth of shifting the project?

  Read the article

• Are there open source alternatives to Bitbucket, Github, Kiln, and similar DVCS browsing and management tools?

  - by Ryan Taylor

  I am aware of several tools/services that provide DVCS browsing and management such as Bitbucket, Github, Kiln, SCM-Manager and Rhodecode. However, the use case I am considering is one such that: Any source code must reside on an employers internal servers. The solution must be open source. It should provide a Bitbucket or Github like experience, including a project wiki, repository browsing and management, and social coding aspects such as code review. The solution should have mercurial support (if not support for other DVCSs). Of these, only SCM-Manager and RhodeCode come close as they can be installed on your own servers and are open source. However they do not have the Bitbucket or Github experience. There is no issue tracker or wiki and the UI, while functional, is not up to par with Github or Bitbucket. I can get close with Trac or Redmine with their repository browsers but unfortunately they do not have any repository management capabilities. Are there other open source tools out there that would provide a similar experience to Bitbucket, Github or Kiln?

  Read the article

• What does this snippet work? It uses session cookie [closed]

  - by Emerald214

  My website is a gadget application. It uses CakePHP framework. It has the below snippet in AppController. I searched the cookie variable in the project but can't find any other occurences. I also don't understand what it works. Why does it always check this in every request. if ( isset( $_COOKIE[session_name()] ) ) { if ( !isset( $this->sns_id ) ) { // ????????? $this->cakeError( 'session' ); } } else { // ?????????????????? if ( !isset( $_REQUEST['post_pf_params'] ) ) { $this->cakeError( 'cookie' ); } }

  Read the article

• How do I classify using GLCM and SVM Classifier in Matlab?

  - by Gomathi

  I'm on a project of liver tumor segmentation and classification. I used Region Growing and FCM for liver and tumor segmentation respectively. Then, I used Gray Level Co-occurence matrix for texture feature extraction. I have to use Support Vector Machine for Classification. But I don't know how to normalize the feature vectors. Can anyone tell how to program it in Matlab? To the GLCM program, I gave the tumor segmented image as input. Was I correct? If so, I think, then, my output will also be correct. My glcm coding, as far as I have tried is, I = imread('fzliver3.jpg'); GLCM = graycomatrix(I,'Offset',[2 0;0 2]); stats = graycoprops(GLCM,'all') t1= struct2array(stats) I2 = imread('fzliver4.jpg'); GLCM2 = graycomatrix(I2,'Offset',[2 0;0 2]); stats2 = graycoprops(GLCM2,'all') t2= struct2array(stats2) I3 = imread('fzliver5.jpg'); GLCM3 = graycomatrix(I3,'Offset',[2 0;0 2]); stats3 = graycoprops(GLCM3,'all') t3= struct2array(stats3) t=[t1;t2;t3] xmin = min(t); xmax = max(t); scale = xmax-xmin; tf=(x-xmin)/scale Was this a correct implementation? Also, I get an error at the last line. My output is: stats = Contrast: [0.0510 0.0503] Correlation: [0.9513 0.9519] Energy: [0.8988 0.8988] Homogeneity: [0.9930 0.9935] t1 = Columns 1 through 6 0.0510 0.0503 0.9513 0.9519 0.8988 0.8988 Columns 7 through 8 0.9930 0.9935 stats2 = Contrast: [0.0345 0.0339] Correlation: [0.8223 0.8255] Energy: [0.9616 0.9617] Homogeneity: [0.9957 0.9957] t2 = Columns 1 through 6 0.0345 0.0339 0.8223 0.8255 0.9616 0.9617 Columns 7 through 8 0.9957 0.9957 stats3 = Contrast: [0.0230 0.0246] Correlation: [0.7450 0.7270] Energy: [0.9815 0.9813] Homogeneity: [0.9971 0.9970] t3 = Columns 1 through 6 0.0230 0.0246 0.7450 0.7270 0.9815 0.9813 Columns 7 through 8 0.9971 0.9970 t = Columns 1 through 6 0.0510 0.0503 0.9513 0.9519 0.8988 0.8988 0.0345 0.0339 0.8223 0.8255 0.9616 0.9617 0.0230 0.0246 0.7450 0.7270 0.9815 0.9813 Columns 7 through 8 0.9930 0.9935 0.9957 0.9957 0.9971 0.9970 ??? Error using ==> minus Matrix dimensions must agree. The images are:

  Read the article

• Right multi object dependance design

  - by kenny

  I need some help with a correct design. I have a class called BufferManager. The push() method of this class reads data from a source and pushes it to a buffer repeatedly until there is no more data left in the source. There are also consumer threads that read data from this buffer, as soon as new data arrives. There is an option to sort the data before it comes to buffer. What I do right now is that BufferManager, instead of pushing data to the buffer, pushes it to another "sorting" buffer and starts a sorting thread. SorterManager class reads the data, sorts it in files and push()es the sorted data into the buffer. There will be a bottleneck (I use merge sort with files) but this is something I can't avoid. This is a bad design, because both BufferManager and SorterManager push data to a buffer (that consumers read from). I think only BufferManager should do it. How can I design it?

  Read the article

• Correct For Loop Design

  - by Yttrill

  What is the correct design for a for loop? Felix currently uses if len a > 0 do for var i in 0 upto len a - 1 do println a.[i]; done done which is inclusive of the upper bound. This is necessary to support the full range of values of a typical integer type. However the for loop shown does not support zero length arrays, hence the special test, nor will the subtraction of 1 work convincingly if the length of the array is equal to the number of integers. (I say convincingly because it may be that 0 - 1 = maxval: this is true in C for unsigned int, but are you sure it is true for unsigned char without thinking carefully about integral promotions?) The actual implementation of the for loop by my compiler does correctly handle 0 but this requires two tests to implement the loop: continue: if not (i <= bound) goto break body if i == bound goto break ++i goto continue break: Throw in the hand coded zero check in the array example and three tests are needed. If the loop were exclusive it would handle zero properly, avoiding the special test, but there'd be no way to express the upper bound of an array with maximum size. Note the C way of doing this: for(i=0; predicate(i); increment(i)) has the same problem. The predicate is tested after the increment, but the terminating increment is not universally valid! There is a general argument that a simple exclusive loop is enough: promote the index to a large type to prevent overflow, and assume no one will ever loop to the maximum value of this type.. but I'm not entirely convinced: if you promoted to C's size_t and looped from the second largest value to the largest you'd get an infinite loop!

  Read the article

• how we can stop a process in ubuntu

  - by mohamad

  Hi sorry for asking this question i've googeled for this solution but i didnt find anything! I've installed tor or vadalia but when i want to run it it give me this error : Vidalia detected that the Tor software exited unexpectedly. I dont know how to stop it! sorry because i'm newbie in ubuntu and i knew that my qestion is so redculous but i need to connect to the internet by tor and i cant fix it ! tnxxxxx alot for responding!

  Read the article

• UBUNTU 11.10 will not boot after succesfully installed on 8GB usb 3.0 pendrive

  - by Oldrifle

  UBUNTU 11.10 on 8GB USB 3.0 pendrive. Drive Partitioned using gparted. 4GB BASE 3GB Home 600MB swap Installation Ok. Restart blinking cursor. Installed another distro on another USB 3.0 stick. It boots OK. --------------- DEBUG -------------------------------------- Boot Other distro and check: I compare boot file with another linux. grub of ubuntu is 1.4mb contend is different. Taken photo with mobile camera but can not add here. Files has note(music) sign on it. Downloaded 11.10 desktop and Installed. Same result. Will download 12.x when ready and try. Ready to try any suggestion.

  Read the article

• How do I get Catalyst 11.10 with ATI Radeon Mobility HD 5470 working on an HP DV7?

  - by S Kumar

  I have a HP DV7 with a HD 5470 512M card. Installation of the Catalyst 11.10 is repeatedly failing on a fresh install of Ubuntu 11.10. Catalyst 11.8 proprietary drivers were working well with Ubuntu 11.04. I have tried installing directly from the .run and generating the distribution specific packages. Nothing has worked. After installation which goes through successfully, the system hangs on reboot after the flashing dots. I have to replace the /etc/X11/xorg.conf to get the X working. I have followed instructions as per the http://wiki.cchtml.com/index.php/Main_Page wiki. Request for support to ATI/AMD gives the response that this model is unsupported on Linux by HP :). Updated 14-Nov I have reverted back to the open source drivers which work well enough for me.

  Read the article

< Previous Page | 158 159 160 161 162 163 164 165 166 167 168 169  | Next Page >