Monthly Archives

Articles indexed in February 2011

Page 165/314 | < Previous Page | 161 162 163 164 165 166 167 168 169 170 171 172  | Next Page >

  • Number of routers in small community lock up and require reboot.

    - by Anthony Hiscox
    I live in a small town which has one primary ISP. Lately I have noticed that a number of wireless routers have been locking up and requiring a reboot before allowing any connections. This has affected two of my routers, my work router, and a few others. In all cases wired continued to function as usual. Often wireless clients can see the SSID but simply won't connect. I can only think of a few possibilities and was hoping someone here might be able to point me in the right direction: Our ISP is well known to be flaky, something they are doing is causing this, what that might be I have no clue it as seems to affect the wireless only. There's a power issue in town, given our remote location and reputation for crap electrical, this seems reasonable. Only one router was plugged in to a UPS, and I'm not sure of the quality. There is some bug in all the different firmware for every one of these routers (all different). That doesn't seem reasonable, unless; it's an unknown (or known) exploit or DoS of some sort being launched by a massive team of ninjas hell bent on forcing us all to be tethered to our walls by ethernet cables or; it's just been a coincidence and I'm just paranoid (this has some weight, I mean read 4 again). Anyone else experience similar issues and have some tips?

    Read the article

  • In APC+PHP, how much RAM is too much? Is it okay to set apc.shm_size to many GB?

    - by Jeremy Clarke
    On our server we have a LOT of RAM for our traffic levels (16GB). The HTTP processes regularly eat up all CPU and need to be restarted without even getting close to using swap memory, so I'm looking for ways to spend RAM to ease the load on Apache (and/or help the seperate MySQL server which may be breaking Apache). I have many WordPress installs on the HTTPD instance so APC sometimes uses as much as 900MB of ram (according to the apc.php charts). Just in case I have apc.shm_size set to 1600MB which is more than it needs but not more than I can spare. This means there is usually lots of extra RAM available to APC but also very little turnover and fragmentation is never more than 1%. Is this dangerous? Should I be slimming down APC to less than 1GB just on principle? Should I be expecting some turnover within APC in the name of bringing it's overall footprint down? Having so much memory devoted to APC means that in top/htop every single httpd process shows ~1.9GB in the VIRT memory column. Obviously this is shared memory and not used per-process, but could it be hurting our server? NOTE: The problem with the server remains unclear but the effect is that about 60 times a day all 8 CPU's fill up to 100% and everything stops working until Monit sees that Apache is broken and restarts it (Monin also saves the MySQL server). I'm not sure if APC is even part of the problem but I'm trying to optimize everything just in case.

    Read the article

  • How do I configure OpenVPN for accessing the internet with one NIC?

    - by Lekensteyn
    I've been trying to get OpenVPN to work for three days. After reading many questions, the HOWTO, the FAQ and even parts of a guide to Linux networking, I cannot get my an Internet connection to the Internet. I'm trying to set up a OpenVPN server on a VPS, which will be used for: secure access to the Internet bypassing port restrictions (directadmin/2222 for example) an IPv6 connection (my client does only have IPv4 connectivity, while the VPS has both IPv4 and native IPv6 connectivity) (if possible) I can connect to my server and access the machine (HTTP), but Internet connectivity fails completely. I'm using ping 8.8.8.8 for testing whether my connection works or not. Using tcpdump and iptables -t nat -A POSTROUTING -j LOG, I can confirm that the packets reach my server. If I ping to 8.8.8.8 on the VPS, I get an echo-reply from 8.8.8.8 as expected. When pinging from the client, I do not get an echo-reply. The VPS has only one NIC: etho. It runs on Xen. Summary: I want to have a secure connection between my laptop and the Internet using OpenVPN. If that works, I want to have IPv6 connectivity as well. Network setup and software: Home laptop (eth0: 192.168.2.10) (tap0: 10.8.0.2) | | (running Kubuntu 10.10; OpenVPN 2.1.0-3ubuntu1) | wifi | router/gateway (gateway 192.168.2.1) | INTERNET | VPS (eth0:1.2.3.4) (gateway, tap0: 10.8.0.1) (running Debian 6; OpenVPN 2.1.3-2) wifi and my home router should not cause problems since all traffic goes encrypted over UDP port 1194. I've turned IP forwarding on: # echo 1 > /proc/sys/net/ipv4/ip_forward iptables has been configured to allow forwarding traffic as well: iptables -F FORWARD iptables -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT iptables -A FORWARD -s 10.8.0.0/24 -j ACCEPT iptables -A FORWARD -j DROP I've tried each of these rules separately without luck (flushing the chains before executing): iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j SNAT --to 1.2.3.4 iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE route -n before (server): 1.2.3.4 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 1.2.3.4 0.0.0.0 UG 0 0 0 eth0 route -n after (server): 1.2.3.4 0.0.0.0 255.255.255.0 U 0 0 0 eth0 10.8.0.0 0.0.0.0 255.255.255.0 U 0 0 0 tap0 0.0.0.0 1.2.3.4 0.0.0.0 UG 0 0 0 eth0 route -n before (client): 192.168.2.0 0.0.0.0 255.255.255.0 U 2 0 0 wlan0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 wlan0 0.0.0.0 192.168.2.1 0.0.0.0 UG 0 0 0 wlan0 route -n after (client): 1.2.3.4 192.168.2.1 255.255.255.255 UGH 0 0 0 wlan0 10.8.0.0 0.0.0.0 255.255.255.0 U 0 0 0 tap0 192.168.2.0 0.0.0.0 255.255.255.0 U 2 0 0 wlan0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 wlan0 0.0.0.0 10.8.0.1 128.0.0.0 UG 0 0 0 tap0 128.0.0.0 10.8.0.1 128.0.0.0 UG 0 0 0 tap0 0.0.0.0 192.168.2.1 0.0.0.0 UG 0 0 0 wlan0 SERVER config proto udp dev tap ca ca.crt cert server.crt key server.key dh dh1024.pem server 10.8.0.0 255.255.255.0 push "redirect-gateway def1" ifconfig-pool-persist ipp.txt keepalive 10 120 tls-auth ta.key 0 comp-lzo user nobody group nobody persist-key persist-tun log-append openvpn-log verb 3 mute 10 CLIENT config dev tap proto udp remote 1.2.3.4 1194 resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert client.crt key client.key ns-cert-type server tls-auth ta.key 1 comp-lzo verb 3 mute 20 traceroute 8.8.8.8 works as expected (similar output without OpenVPN activated): 1 10.8.0.1 (10.8.0.1) 24.276 ms 26.891 ms 29.454 ms 2 gw03.sbp.directvps.nl (178.21.112.1) 31.161 ms 31.890 ms 34.458 ms 3 ge0-v0652.cr0.nik-ams.nl.as8312.net (195.210.57.105) 35.353 ms 36.874 ms 38.403 ms 4 ge0-v3900.cr0.nik-ams.nl.as8312.net (195.210.57.53) 41.311 ms 41.561 ms 43.006 ms 5 * * * 6 209.85.248.88 (209.85.248.88) 147.061 ms 36.931 ms 28.063 ms 7 216.239.49.36 (216.239.49.36) 31.109 ms 33.292 ms 216.239.49.28 (216.239.49.28) 64.723 ms 8 209.85.255.130 (209.85.255.130) 49.350 ms 209.85.255.126 (209.85.255.126) 49.619 ms 209.85.255.122 (209.85.255.122) 52.416 ms 9 google-public-dns-a.google.com (8.8.8.8) 41.266 ms 44.054 ms 44.730 ms If you have any suggestions, please comment or answer. Thanks in advance.

    Read the article

  • Logging in as the same user multiple times in Remote Desktop Windows Server 2008

    - by Little_Johnn
    Quick question: I have a situation where I need to let multiple people on different PCs log into one server 2008 machine as administrator simultaneously over remote desktop. I have the CALs for it, it's just not set up correctly. When one user tries to log in, it boots the other out. What I need is to present to them a different session, just each as logged in as admin. Sorry for the slightly rambling post, I'm new here. Thanks!

    Read the article

  • HTTP Redirect from www.mydomain.com to my amazon ec2 account (instance)?

    - by fabius
    Hello! I have a domain, that is registered at a service provider but my site (wordpress blog) is hosted in a shared account with a friend in another other host service. I want to become seperate from this friend because I'm tired of boring him with my blog downtimes. Now, my problem is that I signed up to Amazon EC2 service and I created a instance (a virtual machine) to host my wordpress blog and now I'd like to redirect mydomain.com to this instance at Amazon EC2 and I don't know how to proceed in order to achieve that. The instance at Amazon EC2 is up and running (it's a 64bit linux machine) but I couldn't redirect mydomain.com to this instance at my host service webpanel. Could someone help me please???

    Read the article

  • Rails app complaining can't connect to memcached but I'm pretty sure it's running

    - by centipedefarmer
    All was well, then I rebooted the server. Right now: $ ps aux | grep memcache 1000 27168 0.0 0.0 121972 1056 pts/0 Sl 15:18 0:00 memcached -m 64 -p 11211 -u nobody -l 127.0.0.1 1000 27816 0.0 0.0 7628 956 pts/0 S+ 15:36 0:00 grep memcache meanwhile the rails app's log is getting tons of this: MemCacheError (No connection to server (localhost:11211 DEAD (Timeout::Error: execution expired), will retry at Tue Feb 15 15:35:55 -0600 2011)): No connection to server (localhost:11211 DEAD (Timeout::Error: execution expired), will retry at Tue Feb 15 15:35:55 -0600 2011) MemCacheError (No connection to server (localhost:11211 DEAD (Timeout::Error: execution expired), will retry at Tue Feb 15 15:35:55 -0600 2011)): No connection to server (localhost:11211 DEAD (Timeout::Error: execution expired), will retry at Tue Feb 15 15:35:55 -0600 2011) MemCacheError (No connection to server (localhost:11211 DEAD (Timeout::Error: execution expired), will retry at Tue Feb 15 15:35:55 -0600 2011)): No connection to server (localhost:11211 DEAD (Timeout::Error: execution expired), will retry at Tue Feb 15 15:35:55 -0600 2011) MemCacheError (No connection to server (localhost:11211 DEAD (Timeout::Error: execution expired), will retry at Tue Feb 15 15:35:55 -0600 2011)): No connection to server (localhost:11211 DEAD (Timeout::Error: execution expired), will retry at Tue Feb 15 15:35:55 -0600 2011) MemCacheError (No connection to server (localhost:11211 DEAD (Timeout::Error: execution expired), will retry at Tue Feb 15 15:35:56 -0600 2011)): No connection to server (localhost:11211 DEAD (Timeout::Error: execution expired), will retry at Tue Feb 15 15:35:56 -0600 2011) MemCacheError (No connection to server (localhost:11211 DEAD (Timeout::Error: execution expired), will retry at Tue Feb 15 15:35:56 -0600 2011)): No connection to server (localhost:11211 DEAD (Timeout::Error: execution expired), will retry at Tue Feb 15 15:35:56 -0600 2011) MemCacheError (No connection to server (localhost:11211 DEAD (Timeout::Error: execution expired), will retry at Tue Feb 15 15:35:56 -0600 2011)): No connection to server (localhost:11211 DEAD (Timeout::Error: execution expired), will retry at Tue Feb 15 15:35:56 -0600 2011) MemCacheError (No connection to server (localhost:11211 DEAD (Timeout::Error: execution expired), will retry at Tue Feb 15 15:35:56 -0600 2011)): No connection to server (localhost:11211 DEAD (Timeout::Error: execution expired), will retry at Tue Feb 15 15:35:56 -0600 2011) Being that I'm more of a developer than a server guy, and being that we don't really have a "server guy," and this being in production... where do I start with this?

    Read the article

  • Can't connect to Sql Server 2008 named instance

    - by eidylon
    I just installed Sql 2008 Express on a new server running Windows Server 2008. I know Sql is working properly, because I can connect to the db fine locally, on the server. I cannot connect to it from a client machine though, neither by IP address nor by machine name (iporname\instance). I know I have the correct IP address, because I am RDCing into the server to perform all this configuration and setup, and if I ping the server name, it is resolving to the correct IP address as well. On the server, I have set up an inbound firewall exception allowing all traffic on any port on any protocol to sqlservr.exe. In SSMS, in server > Properties > Connections Allow remote connections to this server is enabled. In Sql Server Configuration Manager, TCP/IP is enabled in both the Protocols for <instance> and the Client Protocols sections. I looked in the Windows logs, but don't see anything about connections being denied or dropped. As far as I can see, I have everything set right, but cannot connect from a client machine. The client CAN connect to other Sql 2008 Express servers okay, so I know the client configuration is correct. Any ideas where else I can look for info of what/where/how this connection is dropping, greatly apprecaited! The error being returned by the client is: **TITLE: Connect to Server** Cannot connect to [MY.IP.ADD.RSS]\[MYINSTNAME]. ADDITIONAL INFORMATION: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)

    Read the article

  • SQL Server 2000 + ASP.NET: Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'

    - by Rick
    I just migrated a development workstation FROM: Windows XP Pro SP3 with IIS 6 TO: Vista Enterprise 64bit with IIS 7 Since the move, one of my pages that accesses an SQL Server 2000 database is receiving the following error from my ASP.NET 2.0 web page: "Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'." I have: enabled Windows Authentication in IIS and web.config disabled Anonymous Authentication in IIS set up Impersonation to run as the authenticated user verified that the logged in user (in this case, me) has access to the appropriate database on the SQL Server verified that my login and impersonation information is correct in the ASP.NET page by checking User.Identity.Name and System.Security.Principal.WindowsIdentity.GetCurrent().Name (both display my username) My connection string using SqlConnection is "Server={SERVER_NAME};Database={DB_NAME};Integrated Security=SSPI;Trusted_Connection=True;" Why is it trying to login with NT AUTHORITY\ANONYMOUS LOGIN? I have to assume it's some setting or web.config entry specific to IIS7 since it worked fine before the migration. NOTE: The SQL Server is Windows authentication only - no mixed mode or SQL only.

    Read the article

  • Strange filesystem behavior, Ubuntu 9

    - by Fixee
    I have two windows open on the same machine (Ubuntu 9, ia32, server). I'll call these windows W1 and W2. W1: $ cd ~/test $ ls sample $ In W2 I run "make" from a parent directory that recreates file test/sample: $ make project . . $ cd test $ ls sample $ Now, returning to W1: $ ls $ cd ../test $ ls sample $ In other words, after I build from another window and the file test/sample is replaced, ls shows the file as missing in the 2nd window until I cd ../test back into the directory whereupon it reappears. I can give more details if required, but just wondering if this is a well-known behavior.

    Read the article

  • boot failure trying to install linux distro from a cd

    - by jdamae
    Hoping someone can help me get this installation from a cd going. I'm using an older pc: hp pavillion 2.66Ghz, 512RAM with a BIOS revision of 6/30/2003. I reclaimed some an older drive (Seagate ST340810A) that seems to be working as its recognized in the bios (auto-detected) I downloaded a mini.iso of ubuntu 10.10 that I want to install and burned the image to a CD for install. My boot sequence is: First Boot Device [CDROM] and I disabled devices 2-4 so I can just force it to read first from the CDROM. This old pc also has a separate CD writer which is a Sec.Slave, so the Sec.Master is the Toshiba DVD/ROM DSM-171 drive where I placed the burned cd with the linux distro. So, with these settings I cannot get it to boot. I get the "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER". Where do I go from here? Thanks.

    Read the article

  • Install graphics card hardware drivers via remote desktop in Windows 7

    - by Mat Banik
    I come across the same problem over and over. I working on computer that is remote and it is missing graphics card drivers. Just has some default drivers that have limited resolution. I would like to install program that will read the chipset on graphics card and tell me the values so I can go on manufacturer website and download the appropriate drivers. Windows 7 or Windows XP application would do, if you know about any.

    Read the article

  • Problems using InfraRecorder to back up ISOs of certain CDs

    - by Voyagerfan5761
    I've gotten into the habit of backing up my CDs as ISO files, just in case the discs should be damanged, lost, or destroyed. Using InfraRecorder, the process is pretty painless. Unfortunately, I have run into at least two discs that don't back up. I get the error message: Can't read source disc. Retrying from sector 252270 Sometimes this will appear repeatedly. One of the discs is my retail copy of Star Trek: Armada II; the other is disc one of DOOM 3. Both discs run flawlessly when I put them in the drive and let Windows AutoPlay them. Armada II appears as two tracks (one data, one audio) in InfraRecorder, and the error happens at the approximate track boundary. DOOM 3's first disc, however, fails much sooner (around sector 990) and appears as one solid data track. Am I simply using the wrong tools for this job? InfraRecorder is a nice free tool that I can run from my flash drive and use for most tasks of this type, but it does seem to have trouble with certain things. Ideally I'd like to hear about any workarounds people have found for this issue, but if I must switch tools I'm open to it (preferably other free tools).

    Read the article

  • Mac Mail.app & Smart Mailbox conditions

    - by Michael Birchall
    Hey Guys, I'm having some trouble with my Smart Mailbox setup. I've got a Smart Mailbox named "Unread". And Contains messages that match any of the following conditions: Message is Unread Message is not in Mailbox News (AT) lovejungle.com Message is not in Mailbox Info (AT) lovejungle.com For some reasons, it is still displaying messages in either News@ or Info@. I've removed either Not in News@ or Info@ and it still shows messages from each inbox. Any ideas on what's set up wrong? :confused: http://i.imgur.com/IHquL.jpg

    Read the article

  • How can I see the metadata of an ISO file?

    - by netvope
    I have been searching for the list of metadata field of an ISO file on Google but couldn't find anything. That made me think that there isn't any metadata in an ISO file, just the files content and their properties. However, today I find in ImgBurn that there is a field called Imp ID, which typically contains the software used to create the ISO file. I'm not sure if it is specific to the UDF and/or CDFS filesystem. What are the other possible metadata fields in an ISO file? What software may I use to see them?

    Read the article

  • Windows batch file reference to own directory

    - by rwallace
    Suppose you have C:\foo\foo.bat which needs to refer to C:\foo\foo.txt. It may be run from a different directory, but needs to get foo.txt from its own directory, not the current directory. Obviously this could be done by putting the full path C:\foo\foo.txt in foo.bat. The twist is, it's not known at the time of writing the batch file, where it will end up residing on the user's machine, so what the batch file actually needs to do is get foo.txt from the directory where I live, wherever that happens to be. (In a C program I'd use argv[0] but that doesn't seem to work with batch files.) Is there a way to do this?

    Read the article

  • Where can I download Microsoft VC80.CRT version 8.0.50608.0 ?

    - by Leonel
    Hi, I've just installed Microsoft Office Home and Student 2007 in Windows XP SP3 When trying to run MS word or any other office app (Excel, PowerPoint), I get the following message: this application has failed to start because the application configuration is incorrect This also happens with other applications, for instance, Acrobat Reader. A bit of Googling around this error message suggests that this might be due to a mismatch of library versions. In fact, most of the articles and forum messages I found mention a programmer writing an application in Visual C++ and sending it to someone else, who then runs into that error. This is hardly my case ! I looked into Office's files and the manifest file for Excel suggests that Office is trying to use Microsoft VC80.CRT version 8.0.50608.0. However, in my Windows System folder, I can only find the assemblies for 8.0.50727.762 My next step will be trying to find version 8.0.50608.0. How can I find and download it ?

    Read the article

  • In GNU Screen, Recalled bash history command displays one character position to the left of actual location

    - by vergueishon
    I am running Red Hat 5 32-bit (2.6.18-194.26.1.el5). The issue is that when I recall any previous command in bash's history, the first character in the command is displayed immediately after the shell prompt, without any intervening space, likeso: \[me@mymachine tmp]$man mysql If I enter a Ctrl-C, and retype the command, it looks likeso: \[me@mymachine tmp]$ man mysql This makes recalling a command and editing it before re-entering a real pain. Basically, if I try to edit a recalled command, my changes occur one character position to the left (I believe) of what I see on the screen. It's a bit tedious to describe, and appears to only happen with commands with a large number of arguments. UPDATE: The contents of /etc/sysconfig/bash-prompt-screen, 1 #!/bin/bash 2 echo -n $'\033'"_${USER}@${HOSTNAME%%.*}:${PWD/#$HOME/~}"$'\033\\\\' and the contents of /etc/bashrc, 24 screen) 25 if [ -e /etc/sysconfig/bash-prompt-screen ]; then 26 PROMPT_COMMAND=/etc/sysconfig/bash-prompt-screen 27 else 28 PROMPT_COMMAND='echo -ne "\033_${USER}@${HOSTNAME%%.*}:${PWD/#$HOME/~}"; echo -ne "\033\\"' 29 fi 30 ;; I've disable bash-prompt-screen by renaming it--this fixed it. It's entirely possible that there is a fix to the bash-prompt-screen prompt line in the latest version of screen for RHEL 5. The error is seen under Screen version 4.00.03 (FAU) 23-Oct-06. (I noticed an update in the queue, which is installing as I write this.)

    Read the article

  • Is there a browser addon to redirect a link to another, modifying some address content automatically?

    - by kokbira
    Well, I'm looking for an addon that can redirect a link when I click on it in the following ways: Change from https to http Change from twitter.com/xxxxxxxxx to, for example, dabr.co.uk/xxxxxxxxx (added at 2010-02-15th, 20:30 GMT) Remove the "?utm_source=twitterfeed&utm_medium=twitter" from the end ou a URL Generally, replace a string with another (e.g. youtube->yt; so www.example.com/visitingyoutube would become www.example.com/visitingyt) PS: (added at 2010-02-15th, 20:30 GMT) @oKtosiTe, a clearer user case: Supposes that there is a link in Twitter that point to a URL X (URL X is http://www.newspapersite.com/2011-02-15_1304.html?utm_source=twitterfeed&utm_medium=twitter) In that case, I want to open that URL only until ".html", i.e., I want to open a URL Y, that is http://www.newspapersite.com/2011-02-15_1304.html What happens when I click normally in that link: 3.1. Browser goes to URL X What I want to happen when I click in that link: 4.1. The addon must transform URL X to URL Y (I must configure it before to change a piece of URL from "?utm_source=twitterfeed&utm_medium=twitter" to "" 4.2. The browser goes to URL Y

    Read the article

  • Password manager bug with Firefox 3.6.13

    - by Nicolas Buduroi
    I'm having trouble with the latest Firefox (3.6.13) password manager. For a website I'm working on, it doesn't fill the password field for any login credential saved. I've looked into the options "Saved passwords" list and they are all there with the correct passwords. I thought at first that the website was blocking this feature in some way, but the password managers in Chrome (on the same Windows 7 machine) and Iceweasel (in a virtual Debian 6 machine) work well. Any idea about what could cause this problem?

    Read the article

  • linux recommendations for older pc

    - by jdamae
    Hi, I'm new to Linux and I am interested in installing the OS on an older computer I have. I want to setup a webserver and install php, perl. My pc is an older HP Pavillion a255c, Intel Pentium 4 with 512ram. I will probably add some more memory later. This pc is more like a sandbox than anything, but would like to get quickly started with the OS. Is there a particular flavor of linux I would need to download based on my older computer? Any recommendations? I was thinking about Ubuntu but not sure what version to go with. Thanks for your help.

    Read the article

  • Dry length of buoy in OrcaFlex

    - by KAE
    I use a software package called OrcaFlex to model the behavior of a buoy in ocean waves. I would like to share OrcaFlex questions in this forum - hope some users are out there! Here is a starter question: For a 6D buoy, I extracted the 'Dry Length' after the simulation completed. The value of the Dry Length sometimes slightly exceeds the actual height of the buoy, even though this would not seem to be possible given the formula from the manual, Dry Length = (cylinder length) × (cylinder volume above surface) / (cylinder total volume). Any insights?

    Read the article

  • I use windows7 and am looking for a tool to help me tag/organize my bookmarks as well as my thoughts and projects.

    - by tomcat23
    I've got my bookmarks in Chrome currently, and am prone to just bookmarking something if it contains any info I may need for the project I'm currently working on. I had found a way to tag them with delicious and then get an export from that into a wordpress test server (with the tags), having a post for each bookmark, but this proved to be a bit of a waste of time, as there's no way to organize it well. Ideally I'd like to find some sort of mind-mapper with a Prezi-like view, that does auto tagging, excerpting and allows me to notate things effectively. Does my dream tool even exist? I've usually got 20+ tags open all at once because there may be something open on each I need to see/know to make my current project work. It's frustrating. Though I'm on Win7, I'm interested to hear about any tools that are out there that work to take your existing bookmarks and help you organize them productively.

    Read the article

  • VM using a secondary graphic card

    - by Arthur
    Hi everyone, at the moment i have a dual monitor setup on my main PCIe gfx card. I know that on windows it is almost impossible to have a second card (eg no thrills PCI card) running without having an SLI motherboard because of a driver issue. Well this was my conclusion after many weeks of research. I was thinking...is it possible to use a VM in order to utilize the secondary card as the default video output to feed another monitor? let me know if you want me to clarify Thanks :)

    Read the article

  • Ask How-To Geek: How Can I Monitor My Bandwidth Usage?

    - by Jason Fitzpatrick
    If you’re lucky you enjoy wide open internet access with out restriction (or restrictions so high you would have to work all month to meet them). If you’re not so lucky, you’ve got an ISP with heavy caps. Today we help out a reader working under such a cap. Latest Features How-To Geek ETC Internet Explorer 9 RC Now Available: Here’s the Most Interesting New Stuff Here’s a Super Simple Trick to Defeating Fake Anti-Virus Malware How to Change the Default Application for Android Tasks Stop Believing TV’s Lies: The Real Truth About "Enhancing" Images The How-To Geek Valentine’s Day Gift Guide Inspire Geek Love with These Hilarious Geek Valentines Can the Birds and Pigs Really Be Friends in the End? [Angry Birds Video] Add the 2D Version of the New Unity Interface to Ubuntu 10.10 and 11.04 MightyMintyBoost Is a 3-in-1 Gadget Charger Watson Ties Against Human Jeopardy Opponents Peaceful Tropical Cavern Wallpaper SnapBird Supercharges Your Twitter Searches

    Read the article

  • Talend Roadshow : des ateliers techniques gratuits partout en France pour découvrir des solutions open-source d'intégration de données

    Talend Roadshow : des ateliers techniques gratuits partout en France Pour découvrir des solutions open-source d'intégration de données Talend repart en tournée et invite les développeurs français à assister gratuitement aux nombreuses présentations de ses solutions d'intégration des données. Talend Roadshow fera escale cette année à Lyon, Marseille, Paris, Rennes, Strasbourg et Toulouse, où Talend organisera deux ateliers gratuits de 3 heures chacun sur deux jours. Dans le premier atelier sera présenté l'environnement open-source d'intégration des données Talend Open Studio à travers une série d'exercices pratiques. Au menu seront étudiés la création de métadonnées et des «...

    Read the article

< Previous Page | 161 162 163 164 165 166 167 168 169 170 171 172  | Next Page >