Monthly Archives

Articles indexed in November 2013

Page 176/211 | < Previous Page | 172 173 174 175 176 177 178 179 180 181 182 183  | Next Page >

• Multiple CAS servers with Microsoft Exchange and selective authorization

  - by John Wilcox

  I have a Microsoft Exchange 2010 organization within one Microsoft Windows domain and I have users accessing it through OWA. For simplicity lets say I currently have one CAS server (CAS 1) which is accessible only through a VPN connection. Lets call the users connecting to the first CAS group a. For some users though, I need to install another CAS server (CAS 2) so that they can connect without using a VPN connection. Lets call those users group b. What I need to achieve is that group a can only log in to CAS 1 and group b can only log in to CAS 2. Now I know that one can disable/enable OWA per user but in my case that is not enough because OWA must be enabled for both groups.

  Read the article

• P2V - Cold Clone ISO

  - by jlehtinen

  I need to cold clone a physical box in a VMWare environment. What are people using for this these days? My preference is for VMWare's vConverter ISO, but it appears that this was discontinued. It's no longer available for download on their site from what I can tell (even under old versions). I found one guy who appears to have an ISO for version 3.0.3 of vConverter posted to his site for download, but I'm eternally skeptical about downloading these types of software from random strangers: http://thatcouldbeaproblem.com/?p=584 I also found some mention of using MOA, but I've never used this and have no idea on how effective it is as a vConverter replacement. http://www.sanbarrow.com/moa.html One other options seems to be using Acronis - booting off an Acronis disk to capture a .tib, then using a standard installation of vConverter to push the .tib to ESXi.

  Read the article

• PERC H710 mini raid controller advanced settings (BIOS)

  - by gregg

  I upgraded from a PERC h310 to an H710 controller on my Dell R620 but didnt get any increase in performance. This is a ESXi host with a 5 disk RAID 5. I noticed when going to the RAID BIOS that the advanced settings section was not activated/checked off. In that section is the strip element size: 64kb (default) read policy: no read ahead and the write policy: write-through. Will checking that section do any harm to the existing raid array or will it simply enable those policies and hopefully boost performance? Or, lastly, is it already using those policies and the checkmark is simply to activate them for changes

  Read the article

• Remove MySQL ibdata1 without dumping and restoring existing proper databases

  - by Halfgaar

  My MySQL server contains two 100+ GB big databases. One was created with innodb_file_per_table and one wasn't. The one that wasn't, has been dumped, ready to be reloaded. However, the ibdata1 file is still huge and I don't have enough free space. Normal advice in this situation is to dump and remove each database, stop MySQL, then remove ibdata1 and the transaction logs, and then reload the databases. My specific question is: can I leave databases that were created with innodb_file_per_table alone? Or will they be destroyed when I remove ibdata1, even though all their files are separate? I can't afford to take this database off-line to dump and reload it. And because it's already properly made with separate files per table, it would feel pretty useless.

  Read the article

• Installing Debian 7.1 on FakeRAID/Intel Z77 results in boot with no grub menu

  - by user198982

  I'm trying to install Debian 7.1 from DVD onto 2x500GB drives which are set up in a FakeRAID mirror using the on-board FakeRAID provided by the Z77 chipset. I have followed the guide here https://wiki.debian.org/DebianInstaller/SataRaid. Namely, I booted into the expert install with the 'dmraid=true' option added, installed onto the RAID mirror which the installer correctly detected, then installed grub2 onto /dev/mapper/.. raid volume. I chose to use LVM (so a boot partition + LVM volume). As per the guide, I have uncommented the "GRUB_DISABLE_LINUX_UUID=true" line in "/etc/default/grub" and ran "update-grub" then "grub-install /dev/mapper/.." (with the right RAID device in the command). However, after I rebooted the system, all I got was a grub console. It did not load the menu. I checked and it seems that it never even generated a menu file. I re-installed Debian a few times since, trying out different options and also a few workarounds people posted online, but to no avail. The best I am getting is a grub console. No menu. Some times it will generate the grub.cfg, some times it won't, depending on the workaround I try. I was wondering if anyone else has experienced this issue. There is no need to preach how I should not use FakeRAID. I have seen others trying to figure this out so I think a resolution to this issue would be of interest to more than just me. Also, I first installed the system onto a small drive for testing something else. I made a backup with Acronis and was able to restore that onto the RAID mirror by using Universal Restore. When I installed it onto a 500GB without RAID, backed up using the same method, then restored onto a RAID volume of the same size, it would not boot and I got grub errors. Weird. I can post more details, just let me know what you want to see.

  Read the article

• Hyper-V Server Management from Windows 8.1

  - by David Mackintosh

  Is there a way to manage a Hyper-V cluster that runs on a Windows Server 2008 R2 Datacenter from a Windows 8.1 Pro workstation? I've downloaded and installed the Remote Server Admin Tools for 8.1 (http://www.microsoft.com/en-us/download/details.aspx?id=39296), but when I enable the Hyper-V manager, it tells me that I can't manage Hyper-V servers on 2K8 or 2K8R2. Related, the Failover Cluster Manager barfs with a similar error. How do I manage my old servers with my new workstation?

  Read the article

• nfs mount with nfs 3

  - by rahrahruby

  I am running CentOS 6.4 Kernel version 2.6.32-358.23.2.el6.x86_64 #1 SMP and have the following nfs info: nfs-utils-lib-1.1.5-6.el6.x86_64 nfs4-acl-tools-0.3.3-6.el6.x86_64 nfs-utils-1.2.3-36.el6.x86_64 and am trying to mount an nfs volume with nfs3. I have the following line in my fstab: 172.16.11.87:/volume1/web /home/nas nfsver=3 rsize=8192,wsize=8192,timeo=14,intr(no_root_squach) When I run nfsstat it still shows the client as nfs4 Server rpc stats: calls badcalls badauth badclnt xdrcall 0 0 0 0 0 Client rpc stats: calls retrans authrefrsh 1988817 6 1988818 Client nfs v4: null read write commit open open_conf 0 0% 36943 1% 21606 1% 401 0% 392369 19% 375986 18% open_noat open_dgrd close setattr fsinfo renew 0 0% 0 0% 387945 19% 22904 1% 3 0% 2914 0% setclntid confirm lock lockt locku access 1 0% 1 0% 0 0% 0 0% 0 0% 97856 4% getattr lookup lookup_root remove rename link 613996 30% 29888 1% 1 0% 1248 0% 253 0% 414 0% symlink create pathconf statfs readlink readdir 26 0% 226 0% 2 0% 3 0% 0 0% 3825 0% server_caps delegreturn getacl setacl fs_locations rel_lkowner 5 0% 0 0% 0 0% 0 0% 0 0% 0 0% exchange_id create_ses destroy_ses sequence get_lease_t reclaim_comp 0 0% 0 0% 0 0% 0 0% 0 0% 0 0% layoutget layoutcommit layoutreturn getdevlist getdevinfo ds_write 0 0% 0 0% 0 0% 0 0% 0 0% 0 0% ds_commit 0 0%

  Read the article

• Spoof database connection to be local instead of remote

  - by spydon

  I am trying to connect one of our clients "as is" programs to a remote database instead of a local one, they say that they have coded it to be able to do it, but for some reason the program crashes when trying to connect to a remote database. I don't have the source code so I can't really dig much deeper than that and the company does not provide any upgrades or custom modifications. I can succesfully connect to the database through SqlDbx and HeidiSQL so I know that the server is set up correctly. This is why I need to find a way to spoof a remote connection on port 1433 to appear like a local database connection to the program. I thought about editing the hosts file, but it will most likely crash other programs if I bind localhost to another IP than 127.0.0.1. Any ideas?

  Read the article

• How to suppress "Not collecting exported resources without storeconfigs"?

  - by Andy Shinn

  I'm getting the following in my Puppet master syslog over and over: Sep 27 11:52:05 puppet1 puppet-master: Not collecting exported resources without storeconfigs Sep 27 11:52:06 puppet1 puppet-master: Not collecting exported resources without storeconfigs Sep 27 11:52:06 puppet1 puppet-master: Not collecting exported resources without storeconfigs I'm not actually using storeconfigs: [ashinn@puppet1 ~]$ cat /etc/puppet/puppet.conf [agent] server = puppet.mydomain.com environment = production report = true [main] logdir = /var/log/puppet vardir = /var/lib/puppet ssldir = /var/lib/puppet/ssl rundir = /var/run/puppet factpath = $vardir/lib/facter pluginsync = true certname = puppet1.mydomain.com [master] modulepath = $confdir/environments/$environment/modules manifest = $confdir/environments/$environment/manifests/site.pp templatedir = $confdir/templates autosign = $confdir/autosign.conf ssl_client_header = SSL_CLIENT_S_DN ssl_client_verify_header = SSL_CLIENT_VERIFY report = true reports = hipchat Any way I can suppress these messages? What do they actually come from?

  Read the article

• Apache Mod SVN Access Forbidden

  - by Cerin

  How do you resolve the error svn: access to '/repos/!svn/vcc/default' forbidden? I recently upgraded a Fedora 13 server to 16, and now I'm trying to debug an access error with a Subversion server running on using Apache with mod_dav_svn. Running: svn ls http://myserver/repos/myproject/trunk Lists the correct files. But when I go to commit, I get the error: svn: access to '/repos/!svn/vcc/default' forbidden My Apache virtualhost for svn is: <VirtualHost *:80> ServerName svn.mydomain.com ServerAlias svn DocumentRoot "/var/www/html" <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory "/var/www/html"> Options Indexes FollowSymLinks AllowOverride None Order allow,deny Allow from all </Directory> <Location /repos> Order allow,deny Allow from all DAV svn SVNPath /var/svn/repos SVNAutoversioning On # Authenticate with Kerberos AuthType Kerberos AuthName "Subversion Repository" KrbAuthRealms mydomain.com Krb5KeyTab /etc/httpd/conf/krb5.HTTP.keytab # Get people from LDAP AuthLDAPUrl ldap://ldap.mydomain.com/ou=people,dc=mydomain,dc=corp?uid # For any operations other than these, require an authenticated user. <LimitExcept GET PROPFIND OPTIONS REPORT> Require valid-user </LimitExcept> </Location> </VirtualHost> What's causing this error? EDIT: In my /var/log/httpd/error_log I'm seeing a lot of these: [Fri Jun 22 13:22:51 2012] [error] [client 10.157.10.144] ModSecurity: Warning. Operator LT matched 20 at TX:inbound_anomaly_score. [file "/etc/httpd/modsecurity.d/base_rules/modsecurity_crs_60_correlation.conf"] [line "31"] [msg "Inbound Anomaly Score (Total Inbound Score: 15, SQLi=, XSS=): Method is not allowed by policy"] [hostname "svn.mydomain.com"] [uri "/repos/!svn/act/0510a2b7-9bbe-4f8c-b928-406f6ac38ff2"] [unique_id "T@Sp638DCAEBBCyGfioAAABK"] I'm not entirely sure how to read this, but I'm interpreting "Method is not allowed by policy" as meaning that there's some security Apache module that might be blocking access. How do I change this?

  Read the article

• TCP/IP performance tuning under KVM/Qemu

  - by vpetersson

  With more and more companies switching to public cloud services, I'm curious what you guys' thoughts are on TCP/IP tuning in the cloud. Is it worth bothering with? Given that you don't have access to the host-server, you're somewhat limited I presume Let's say for the sake of the argument that you're running three MongoDB-servers in a replica-set on FreeBSD or Linux that all sync over an internal network. I'd also be curious if anyone made any actual performance benchmarks to back up their arguments. I benchmarked the various network drivers available for KVM/Qemu here, but I'm curious what the gurus here suggest to tune further. I started playing around a bit with the tuning-recommendations as suggested over here, but interestingly enough I saw a decrease in performance, rather than an increase, but perhaps I didn't fully understand the tweaks. Update: I did a few more benchmarks and posted the result here. Unfortunately the result wasn't really what I expected.

  Read the article

• How do I get the machine name from an IP via Multicast DNS?

  - by Adam

  I have a list of IP addresses on a network, and most of them support multicast DNS. I'd like to be able to resolve the server name instead of just having the IP address. ping computer.local 64 bytes from 192.168.0.52: icmp_seq=1 ttl=64 time=5.510 ms 64 bytes from 192.168.0.52: icmp_seq=2 ttl=64 time=5.396 ms 64 bytes from 192.168.0.52: icmp_seq=3 ttl=64 time=5.273 ms Works, but I'd like to be able to determine that name from the IP. Also the devices don't necessarily broadcast any services, but definitely do support mDNS broadcast. So looking through services won't work.

  Read the article

• Outlook 2010 says "File is in use by another application or user" while closing

  - by A_Pointar

  Outlook opens, gets new emails and everything but when I close it, it gives me the following error and then opens up a Save a File window after I cancel this error message. There's no other computer that may be using Outlook under this User Name because I just set-up a brand new User Name. However, Colligo Briefcase is attached to the Outlook and not sure if this is triggering and if so how I address the issue!? Thanks a lot!

  Read the article

• Pressing zero key brings up lock/switch user screen in W7

  - by qinghua

  This issue started after my cat walked all over the keyboard... Whenever I press the "zero" key, the screen goes black and I'm taken to the lock/switch user screen. The other functions of the key work fine - it can produce ) and / like usual. Numlock is off, and as far as I know, my computer doesn't have Function Lock. If I log out of my user account and sign in as a guest, the "zero" works again, but if I create a new user profile, it doesn't work. I get the same issue when I hit "zero" using the on-screen keyboard. My keyboard layout is set to US English. I've uninstalled and reinstalled the ATK package, and updated my keyboard drivers. I have an ASUS U43JC-X1 laptop running Windows 7, and I haven't installed any new programs lately.

  Read the article

• What IP's should the servers be assigned?

  - by user273284

  I have got 4 subnets (calculated using online calculators) The major network is: 172.16.0.0/16 The students subnet having the highest IP requirement /22 mask gets 172.16.0.1 - 172.16.3.254 as assignable IP's Staff subnet /23 mask gets 172.16.4.1 - 172.16.5.254 as assignable IP's Management subnet /27 mask gets 172.16.6.1 - 172.16.6.30 as assignable IP's Servers subnet /27 mask gets 172.16.6.33 - 172.16.6.62 as assignable IP's Should I follow this IP addressing scheme or should the servers get the first 30 IP's of the network i.e. 172.16.0.1 - 172.16.0.31 ? What is the best practice?

  Read the article

• What components should I upgrade to squeeze more life of my pc? [on hold]

  - by Jared

  Hi my current specs are CPU: Intel Core i5 750 2.66 GHz, Socket 1156 Motherboard: Asus P7P55 LX Motherboard, Socket 1156, 4xDIMM DDR3, 2xPCIe-16, 3xPCI, 2xPCIe-1, 14xUSB2, Audio, 1xATA, 6xSATA, RAID, ATX HDD: Seagate Barracuda 7200.11 ST31500341AS Hard Disk Drive, 1500GB, 7200rpm, 32MB Cache, SATA-2 RAM: G.Skill Ripjaw F3-12800CL8D-4GBRM, 2x2GB, DDR3-1600, PC3-12800, CL8, DIMM Video: MSI Radeon 5850 R5850-PM2D1G Video Card, 1024MB, DDR5, PCIe-16, DVI, CrossFire, HDMI PSU: Vantec ION2, 620W ATX PSU, SLI Ready, Black Firstly I know it badly needs an SSD, for which I'm thinking of the Samsung 250gb 840 EVO series. The ram could do with another 4GB, for which I am thinking of replacing the 2x2GB for 2x4GB of the same type. My video card is struggling with the latest releases, so vitally should I ditch the video card and go for something newer (ATI 7850, GTX 660?) or try and get another 5850 for crossfire support? Bearing in mind 5850's are sort of hard to come buy now as they are not stocked in shops usually, which means they have to be bought second hand.

  Read the article

• Is reliability reputation of mechanical keyboards overblown?

  - by Rarst

  A while back I worked up to finally buying mechanical keyboard (~$100 range, "black" switches) and was initially quite content with purchase. However just outside first year (read it - as soon as warranty expired) it started to develop repeat issues (press once, get chain of letter repeated) on multiple keys. It doesn't react to generic cleaning (up to compressed air) and searching Internet shows noticeable amount of people with similar-to-identical issues, spanning years. This makes me severely hesitant to buy another mechanical keyboard, considering: every other keyboard I ever owned, including ultra-cheap crap managed to last longer than that typing experience is nice, but not lifechanging-fan-forever nice for me my choice of mechanical keyboards is severely limited not many brands represented in local market and primarily crazy looking gamer models russian (not to mention russian and ukrainian if possible) layout excludes international ordering price tag for a meek year of use I got our of it is plain demoralizing It is obvious mechanical keyboards have their fans, but shopping around for "best fit" or getting into multiple hundreds price tags is probably not something I am highly interested in. Considering my constraints and bad experience with reliability, is it practical for me to sink more money into buying mechanical keyboard(s) again? In other words - manufacturers are beaming about how crazy reliable mechanical keyboards are. Are active long time users of such keyboards confidently of same opinion?

  Read the article

• I cant use wasd and arrow keys at the same time?

  - by William

  I am having this promblem where if I press one key on either one of the arrow keys or wasd, I cant press that direction on the other one unless that key is the only key of wasd or the arrow keys being pressed at that time. For example: I can press D and RIGHT, but if I do, I cant press W,A,S,LEFT,UP and DOWN. If I press A and S then I cant press LEFT and Down. Does anyone have a solution to that problem, cause I have searhed around, and found no similar problem.

  Read the article

• Access server using IP on another interface

  - by Markos

  I am using Windows Server 2012 instead of a router for my home network. Currently I am using RRAS and computers from local network can access Internet correctly. Here is a map of the current setup: [PC1] ---| |---- (lan ip)[Server](wan ip)--> internet [PC2] ---| I have applications running on Server, such as IIS and others. All can be accessed from internet using wan ip and from lan using lan ip. I have a domain, lets say its my-domain.com, which is resolved to my wan ip. What I want is to enable my LAN computers to be able to connect to services on my server using the very same address as internet users: eg http://my-domain.com/. However this does not work for my lan computers. What I understand is that I need to set up some kind of loopback route in a way that packets comming to LAN interface get routed to WAN interface. But I haven't found how to achieve this (in fact, I don't know WHAT to search for). Feel free to ask for additional informations and I will try to update the question.

  Read the article

• Turn computer into DAS (Direct Attached Storage)

  - by Damon

  Can we build a direct attached storage by taking a computer/server, adding an HBA, and installing some appropriate software? We would use Debian as a host OS for both the DAS and the server. If so, what software do we use? And do we simply need a HBA for the DAS and the Server? Or do we need more hardware? The goal is to use an older server that does not have enough room for drives but does have ECC memory, server processors, redundant power supplies, dual nics, etc. Then find any boxes, server or not, the key being having enough room for 8-12 drives, fans, etc. and turning them into a DAS; build two of these DAS's and have them connected to the server. Eventually we want to have two servers using DRBD and associated services like heartbeat and pace maker to create an HA setup for our server(s) but that will take a long time to configure since I have no experience with anything related to DRBD (yet) and have a learning curve I have to get past, not to mention the additional cost of more hardware (two servers vs one).

  Read the article

• Can't connect to web-server on local host behind NAT

  - by eyeinthebrick

  I got Ubuntu as host. I'm running a web-server on http://192.168.199.8:80. It is accessible from the local network, but when I'm trying to reach it by external IP, I go to my router's web-page. I arranged port forwarding on router for port 80 to my local IP 192.168.199.8. Unfortunately web-server is still unavailable via external IP. I checked whether the port is open via http://www.canyouseeme.org/. As it showed that the port is unavailable, I changed port used to 3659 (not forget to rearrange port forwarding rule). Although http://www.canyouseeme.org/ shows that port 3659 is open, I still can't reach my web-server. Where can the problem be?

  Read the article

• smbclient -L host works. ping host doesn't work. What is missing

  - by DrorCohen

  I upgrade my ubuntu desktop to 13.10. When I say upgrade I mean installed on a new partition from scratch (old partition is available if To the problem: I'm trying to ping a host (Drobo-FS server) by it's netbios name. I get "Unknown Host". However running smbclient -l HostName - give me all the output in the world. Stracing the ping I can it tries to use resolv.conf (expected fail) and then when accessing mdns stuff it fails (no mdns.allow file) and exits. Here's the host line from /etc/nsswitch.conf: hosts: files wins mdns4_minimal [NOTFOUND=return] dns mdns4 I've added wins right after files (and also tried before dns. Nothing helps. Reboot after every change. What am I missing?

  Read the article

• Logging in over ssh in a different session?

  - by Jordan Reiter

  I don't know exactly what the correct term is, but I notice if I log in to a remote SSH server, then close the window, open a new one, and log into that server again, my bash history and user processes appear to be different. For instance, if I started a background process I can't get back into it, or something I typed won't show up in my bash history. The problem is for some reason occasionally something happens to my remote session and instead of being disconnected the session just hangs; I have to close the window and open a new one to reconnect. As a result sometimes it means a long running process basically is "lost" since I can't get back into it. Is there any way to set it up so that when I log back in I log back in to the same "session"? This is using OS X Terminal.

  Read the article

• Keyboard no longer works when entering BIOS

  - by Tommy

  I am trying to boot from USB so I can install a couple different Linux distros. I can enter the BIOS, but as soon as I enter the BIOS the keyboard lights switch off (Num Lock and Caps Lock) and I cannot use the keyboard to do anything in the BIOS or even exit or restart the PC using Ctrl+Alt+Del or do anything at all with the keyboard. But as soon as I boot back into Windows, everything is fine... I've never had this problem before and some Googling hasn't helped. I've tried using a few other keyboards and simply unplugging/replugging the keyboards, but it didn't work. Is there anything I can do in Windows to maybe find out why the keyboard isn't working in the BIOS screen? In the Device Manager, all the drivers are up to date and there are no conflicts.

  Read the article

• How do I remove the Conduit toolbar that comes with µTorrent?

  - by Tavio

  I have recently installed µTorrent in my computer and unfortunately the Conduit adware came bundled with it. Basically, it installs a toolbar on all browsers and replaces the default search and initial homepage to that of Conduit. I have tried to run AdAware and MalwareBytes but both were unable to remove it. Search results on Google tell me to remove the Conduit software in the Control Panel → Remove Programs, but it's not listed there. Other suggestions involved going into the extensions configuration in Chrome, but it's not listed there as well. Anybody had the same problem?

  Read the article

< Previous Page | 172 173 174 175 176 177 178 179 180 181 182 183  | Next Page >