Monthly Archives

Articles indexed in November 2011

Page 195/280 | < Previous Page | 191 192 193 194 195 196 197 198 199 200 201 202  | Next Page >

• HP 530 Wireless problem. Bad communication with access point

  - by foxy

  I installed Ubuntu 11.10 on HP 530 and to make Wireless work installed STA driver from jockey (obviously proprietary) and, since it didn't work also installed their driver from HP website via ndiswrapper. After this (and a reboot) I see the WiFi indicator glowing, like it should be, and I am able to find local access points. But when I try to connect to mine personal one with WPA 2 security (with password) it hangs at authentification (I'm using wicd to manage wifi), and after a minute or so (I guess timeout of request happens) it says I have a wrong password (it is 100% correct). What might be the problem here? Yesterday I was able to connect to access point by changing type of encryption from passphrase to preshared key but didn't have internet access. Now, after reboot, I can't connect there again.

  Read the article

• Ubuntu 11.04 and 10.04 hang with black screen while installing from USB disk

  - by Bill

  I've been trying to install Ubuntu 11.04 from a USB flash stick and each time I try to boot from the USB key one of two things happen: A) The screen that asks you what you would like to do (e.g. run Ubuntu from the USB key or install it) shows up and the countdown to the default option starts to count down but as soon as I either touch the keyboard (sometimes I press enter or the arrow keys to select an option) or the countdown gets to zero the screen just locks up and nothing happens no matter how long I wait. B) When I boot from the USB key the screen will flicker for a second and then go black with a flashing white underscore at the top left corner of the screen. Again it doesn't matter how long I wait, nothing happens and pressing keys doesn't do a thing. The very first time I tried to install it I got a terminal-like screen that said something about a directory called 'casper' having an error of some sort. I have tried installing from USB using both 11.04 and 10.10. I'm about to try 10.04. I have read tons of forum posts about this but so far I haven't seen anything in the solutions that apply to me. My intention is to dual boot Windows 7 and Ubuntu. I must keep Windows as I am required to use Visual Studio for one of my college courses. Right now I'm using Wubi but I really want a full install. I can't use LVPM because it doesn't work with the version of Wubi I used. So now I'm thinking my best bet is to try to get a clean install working. I'd also convert Wubi to a full install too but there's no solution as far as I've read. So could someone tell me a reason why this is happening or if there's something I can do to get around the problem? I'm using a Gateway LT2802u netbook with and Intel Atom N455 processor, 1GB RAM, Intel Graphics Media Accelerator 3150 graphics card, and a 250GB HDD. I don't have anything on my current Wubi install that I can't replace so keep in mind when answering that I don't care if I lose my current settings and files from Wubi. Thanks everyone! UPDATE I just answered my own question so in case anyone else is having this same problem using similar hardware, do the following: When I first tried installing 11.04 I used the recommended universal installer tool to create the USB live/installation disk. That caused the original problem. Note that I had already downloaded the 11.04 ISO and did not use the included downloader from the USB creator. After that failed I used the same USB creator but had it download 10.10 for me. It also failed with the same issue. I repeated this process with unetbootin as well for both versions. Finally, I downloaded the Ubuntu 10.04 ISO and used the recommended USB creator once again. There was an error while creating the USB live install so I reformatted the USB key as FAT32 and tried again. It created the USB key. I then booted from the USB flash drive and selected "Install Ubuntu" (exact wording was different). It worked! It took me through the process that you see shown in pictures on the Ubuntu website. I let it create the appropriate partitions for me and it simply worked. I did get a few errors while the system tried to restart after it installed. It hung on a terminal-like screen but I pressed ENTER and it restarted. I booted into Windows 7, it checked the disks as it sensed that I messed with a partition, then it booted into Windows normally. Now I'm going to uninstall Wubi and update my new full install of Ubuntu! I'm excited to get the benefits of a full install now. So in the end, hopefully someone can learn from what I did.

  Read the article

• PC to USB transfer slow

  - by Vipin Ms

  I'm having trouble with USB transfer,not with external hard disk. Transfer starts with like, for the transfer of 700MB file it starts with 30mb/s and towards the end it stops at 0s and stays put for like 3-4 mins to transfer the last bit. I have tried different USB devices, but no luck. Is it a bug? Another important point is, in Kubuntu there is no such issue. So is it something related to Gnome? I'm using Ubuntu 11.10 64bit. Somebody please help, it's really annoying. Here are the details. PC all of my drives are in ext4. USB I tried ext3,ntfs and fat32. All having the same problem. Here are my USB controllers details: root@LAB:~# lspci|grep USB 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) Here is an example of one transfer. I connected one of my 4GB usb device. Nov 24 12:01:25 LAB kernel: [ 1175.082175] userif-2: sent link up event. Nov 24 12:01:25 LAB kernel: [ 1695.684158] usb 2-2: new high speed USB device number 3 using ehci_hcd Nov 24 12:01:25 LAB mtp-probe: checking bus 2, device 3: "/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-2" Nov 24 12:01:26 LAB mtp-probe: bus: 2, device: 3 was not an MTP device Nov 24 12:01:26 LAB kernel: [ 1696.132680] usbcore: registered new interface driver uas Nov 24 12:01:26 LAB kernel: [ 1696.142528] Initializing USB Mass Storage driver... Nov 24 12:01:26 LAB kernel: [ 1696.142919] scsi4 : usb-storage 2-2:1.0 Nov 24 12:01:26 LAB kernel: [ 1696.143146] usbcore: registered new interface driver usb-storage Nov 24 12:01:26 LAB kernel: [ 1696.143150] USB Mass Storage support registered. Nov 24 12:01:27 LAB kernel: [ 1697.141657] scsi 4:0:0:0: Direct-Access SanDisk U3 Cruzer Micro 8.02 PQ: 0 ANSI: 0 CCS Nov 24 12:01:27 LAB kernel: [ 1697.168827] sd 4:0:0:0: Attached scsi generic sg2 type 0 Nov 24 12:01:27 LAB kernel: [ 1697.169262] sd 4:0:0:0: [sdb] 7856127 512-byte logical blocks: (4.02 GB/3.74 GiB) Nov 24 12:01:27 LAB kernel: [ 1697.169762] sd 4:0:0:0: [sdb] Write Protect is off Nov 24 12:01:27 LAB kernel: [ 1697.169767] sd 4:0:0:0: [sdb] Mode Sense: 45 00 00 08 Nov 24 12:01:27 LAB kernel: [ 1697.171386] sd 4:0:0:0: [sdb] No Caching mode page present Nov 24 12:01:27 LAB kernel: [ 1697.171391] sd 4:0:0:0: [sdb] Assuming drive cache: write through Nov 24 12:01:27 LAB kernel: [ 1697.173503] sd 4:0:0:0: [sdb] No Caching mode page present Nov 24 12:01:27 LAB kernel: [ 1697.173510] sd 4:0:0:0: [sdb] Assuming drive cache: write through Nov 24 12:01:27 LAB kernel: [ 1697.175337] sdb: sdb1 After that I initiated one transfer. lsof -p 3575|tail -2 mv 3575 root 3r REG 8,8 1719599104 4325379 /media/Misc/The Tree of Life (2011) DVDRip XviD-MAXSPEED/The Tree of Life (2011) DVDRip XviD-MAXSPEED www.torentz.3xforum.ro.avi mv 3575 root 4w REG 8,17 1046347776 15 /media/SREE/The Tree of Life (2011) DVDRip XviD-MAXSPEED/The Tree of Life (2011) DVDRip XviD-MAXSPEED www.torentz.3xforum.ro.avi Here are the total time spent on that transfer. root@LAB:/media/SREE# time mv /media/Misc/The\ Tree\ of\ Life\ \(2011\)\ DVDRip\ XviD-MAXSPEED/ /media/SREE/ real 11m49.334s user 0m0.008s sys 0m5.260s root@LAB:/media/SREE# df -T|tail -2 /dev/sdb1 vfat 3918344 1679308 2239036 43% /media/SREE /dev/sda8 ext4 110110576 60096904 50013672 55% /media/Misc Do you think this is normal?? Approximately 12 minutes for 1.6Gb transfer? Thanks.

  Read the article

• Replicate a system as is

  - by Sarvesh Lad

  How do i repliacate a system as is. i have installed ubuntu from the minimal iso... i have kept it to minimum now i m using UCK to customise a live cd is there anyway i can replicate my installed system as is? i.e. install apps that i have install and remove apps that i have not installed/removed i tried using synaptics and saving the marking full state way and when i read it when customizing, it doesnt remove the apps that i have removed it just reads installs more apps, it doesnt remove

  Read the article

• Wireless not working with a RTL8191SEvB

  - by Carlos Reis

  my wireless is not working in Ubuntu 11.10 and it worked fine in 11.04, i've done a fresh install and it detects the wireless but when i try to connect it keeps asking for the WPA key.Can anyone help me? I've tried to download the drivers from the realtek site but i get an error when i do "sudo make" i'm using a 64bit and i've tried the 32bit and nothing solves the problem. my wireless card: RTL8191SEvB

  Read the article

• How do I fix my theme?

  - by SepiDev

  After installing and using Ubuntu 11.10 for while I decided to install gnome shell. After Installing and rebooting my system I saw that Ubuntu light theme (ambiance/radiance) is gone. I check /usr/shar/themes and /usr/shar/icons, it seems that the light themes and mono icons exist. I even reinstalled gtk3-engine-unico package but none of these effort fixed my problem :( my desktop now looks like this: What should I do to get my default ubuntu theme back?

  Read the article

• Which programming language suits a system that must work without user input

  - by Ruud

  I'm building a prototype of a device that will function much alike a digital photoframe. It will display images retrieved from the internet. The device must start up and run the photoframe. It will have no user interface. The device has a minimal ubuntu installation, but I could install Xorg or whatever needed. Question: I have trouble figuring out which programming language will be suitable. I've just started using Python to try out several things and I am able to download and display images. I guess that means Python can do what I'd like, but is it suitable as a language that will be run on boot without any user interference? Related questions: - How do I set up Linux to start that script automatically? - How to setup a second Python script as a server that runs in the background to retrieve images before they are displayed (Because I think I'll need threading of some sort?)

  Read the article

• Activity log manager is not preventing Zeitgeist from logging files

  - by Vivek

  I am running Gnome Shell and I do not like Zeitgeist indexing all my files. This makes the search in dash very slow. I do not want the dash to search recent files, so I installed activity log manager to prevent zeitgeist's logging activity. I configured the log manager as below. But even after adding every folder, the files keep appearing in the dash under Recent Items. Is there any other software or tweak which will instruct zeitgeist to search only applications installed in my system and not my recent files.

  Read the article

• Grub boot problems with older ubuntu

  - by denk doink

  This is my 1st post here and there are 2 problems that are inter-related. I'm not much of a Linux system person... the computer is a dedicated linux box without any windoze. 1) running 9.10 and had a boot failure last week. looks like a file was deleted or corrupted. i was unable to get it to work. realizing it was a boot issue, i took the CD and installed 9.04 to co-exist with 9.10 on the disc. 9.04 was put into a 2.5 gb ext3 partition. i was able to boot into 9.10 from grub menu selection. 9.04 was now the default in grub menu. 2) i want to remove/delete/purge 9.04 completely from my system and "clean up" the stuff so that the machine boots straight to 9.10 (no grub menu). how are these accomplished in a "safe" manner? thank you. -denk

  Read the article

• How do I set up a virtual network interface with its own IP address?

  - by Stefano Palazzo

  I vaguely remember that it's possible to set up virtual network interfaces with their own IP addresses, using only one physical network connection. I can find a few guides on the internet that recommend setting these up in /etc/network/interfaces, but Ubuntu doesn't use this file. Therefore my question: What's the correct way of setting these up in recent versions of Ubuntu? As this is a laptop, and I need it to connect to all kinds of different networks, I want to keep the network manager and all its configuration. To be more clear: at the end of this, I want to have a new network interface (e.g. "eth42") with its own IP address, but using whatever is connected in network manager to send the actual packets. In NM, it should appear as if I just had a second ethernet adapter installed in my system.

  Read the article

• How can I make the unity sidebar visible permanently (as in, in all circumstances)?

  - by Doug

  Yes, I have seen the other similar questions; if this is a duplicate please link me to the question that answer this, because none of them appear to; all appear to only address (1) of the two issues below: There are TWO times when the sidebar will magically vanish: 1) By default when you move your cursor off it and focus on a different app. This is fixable by setting the auto hide behaviour, as described here: How to make the Unity launcher always visible? 2) When you move a window over / under it, or maximize a window. Even when the autohide setting is 'never' this will cause the sidebar to mysterious decide to hide itself. In fact, it doesn't appear what settings you change, this behaviour refuses to change. This is extremely undesired behaviour. I'm using a stock standard 11.10 install.

  Read the article

• Dual boot problem - Ubuntu windows 7

  - by Benoit Roberge

  I've been using Ubuntu for a while on my laptop. Recently, I decided to install Ubuntu on my main desktop PC (dual boot with windows 7). I downloaded the Ubuntu installer for windows and installed it (it's now showing Ubuntu in the installed software in my W7 control panel). However, when I tried to boot Ubuntu, after the boot loader and the login screen, my screen splitted in half. I was not able to see the icons and the launcher. I was also not able to do anything. I uninstalled Ubuntu and tried again twice. Same thing/results. Then, I created a partition in W7 and installed Ubuntu on it. Unfortunately, it's doing the same thing. I never saw something like this. Any idea??? Thanks for your help and support.

  Read the article

• Ubuntu is not showing in LightDM menu list

  - by dearvivekkumar

  I am using using ubuntu 11.10. Everything was working perfectly this morning. At a moment "Ubuntu software center" application was unable to get started. So I restarted by system and when I logged in it started under GNOME. Again when I try to start in ubuntu session then it was not showing in menu list but Ubuntu 2D is coming. I don't come to know why this is happening. please let me know any fix for this issue. Thanks!

  Read the article

• Google analytics - drop in traffic

  - by Andy

  Bit of a general question here. We are in the process of converting a number of our clients from older web sites to new ones. The problem we are getting, and sorry for being so general here, is we are getting a sharp decline in traffic as reported on Google Analytics. It's not a gradual decline, it seems to hit almost as soon as the new site goes live. I've just got a few questions to see if there is something we are doing wrong: a) We are using the same analytics accounts going from old to new site. Is this a bad idea? b) The actual analytics code is integrated into the pages using a server-side include. IS this a bad idea? c) We structure our sites differently to our old site. IE. The old sites would pretty must have all the web pages in the root directory, and hyperlinks would be linked to the page files: EG. <a href="somepage.aspx">Link</a> Our new sites now have a directory structure that pretty much reflects the navigation structure, and hyper links link to the pages directory instead of the actual page: EG. <a href="/new-items/shoes/">New shoes</a> Is this a bad idea. I'm really searching for a needle in a haystack here. Would appriciate any help or advice as to why we are getting such a sharp and sudden drop in traffic. Again, so this is such a general question. Thanks in advance.

  Read the article

• Search engine friendly, SEO blog software

  - by Steve

  Is there a comparison of the SEO capabilities of different blogging software/blogging plugins? I'd like things to be as optimised as possible. I have a basic grasp of SEO principles, probably 12-24 months old. I'm about to start a blog, after having a few previously. Also, I'm not up to speed on what pings are in the blogging world. What are they, and how do they work? I assume it is best to have blogging software that automatically pings.

  Read the article

• Atom feed validator keeps showing Self reference doesn't match document location

  - by Dino

  I am creating an atom feed, but when I validate it I keep getting: Self reference doesn't match document location and the specific line that is causing the error is: <link rel="self" type="application/atom+xml" href="http://www.example.com/test.rss"/> Please can anyone advise what the error is? Ps. I noticed an up arrow just at the end of that line. (presumably something to do with that bbut not sure)

  Read the article

• Making Multilingual J! 1.5 + + Joomfish + VM 1.17 more workable

  - by rhand

  I have been working with a multilingual Joomla! 1.5.23 e-commerce website for a client for quite a while and made several customizations. But the client is still not happy he has to adjust content at at least three locations: Joomfish Virtuemart Article Manager Joomfish is nice in the way that it allows you to create multilingual content and copy and paste the source language on the same page, which makes translation work easier but it is annoying in the way you have to edit several custom fields at different locations/ content types. As Joomla! source language content still needs to be created in the article manager first this is the second location the client has to work at. The third location is Virtuemart. Here all the products and product categories are created. And here we added some custom fields as well. Now I was considering upgrading the website to Joomla 1.7 or later on to 1.8. This J! versions have better multilingual support. But I wonder if er can really make the client's life easier. We will still have to copy the source language to a new article and create content in another language. We will still have the issue of content in custom fields that needs to be translated and we will still have to create content. Should I go for another CMS such as Magento or do you think there is a way in a more recent Joomla! version to work with all content in one or max two locations?

  Read the article

• Web-based CMS for mobile app

  - by JWood

  I'm just about to start developing a mobile app which needs to be fed from a CMS. I started designing the tables when I thought there must be something out there which could save me a load of time and let me concentrate on the mobile side of things. So, I'm looking for a CMS that will let me create hierarchical "pages" which will just be 4-5 database fields with a simple front-end to allow to edit and update them. I don't mind having to write some code to layout the database and forms etc, any saving on starting from scratch would be good. The only requirement is that I be able to access the data via some sort of web service, REST, JSON, XML, anything really... Can anyone suggest anything that might help? Thanks, J

  Read the article

• Where can I find a good tutorial to replicate Game Maker's surfaces and blend modes in XNA?

  - by Fred Dufresne

  I know Game Maker's surfaces exist in XNA (It's more the othe way around, XNA's surfaces exist in Game Maker), same thing for blend modes, since (I think) they both use DirectX. This is the question: "Where can I find a good tutorial to replicate Game Maker's surfaces and blend modes in XNA?" I'm using XNA 4.0 and Game Maker 8.1 Pro. Background I'm slowly moving from Game Maker to... Something else. I've learned some good C++ but DirectX is hardcore and OpenGL needs some pretty good understanding of the language to be able to use it correctly. XNA and C# together seemed like a good middle but the documentation is hard to understand for a newb like me. In the end, I chose to focus on XNA.

  Read the article

• UDK : UTWeap_RocketLauncher gift CreateInventory: Any idea why this does not work properly?

  - by John Sloan

  I am giving the player an instanced class of UTWeap_RocketLauncher in an instance of UTGame. PlayerPawn.CreateInventory(class'FobikRocketLauncher',false); // Does not work PlayerPawn.CreateInventory(class'FobikLinkGun',false); // Works Even if I give the original class (eg. UTWeap_RocketLauncher) it does not actually show up. However if I do a "GiveWeapons" cheat, I get it just fine. It also works if I had code it into the map. - But UTWeap_LinkGun works fine either way. Any ideas? It shows the default ammo amount, and the icon on the HUD.

  Read the article

• Learning XNA for Game Development. Is it worth It?

  - by Nipuna Silva

  It seems that most of the popular games in the world are developed using C++. But Microsoft's game platform, XNA Studio is based on programming in C# and I didn't find any popular game which was developed using XNA. Also there are fewer Ebooks you find on XNA and even the google search for a problem won't give you much help. Does people doesn't use XNA as a gaming platform? Is it worth learning XNA for game development or should I consider some other platform?

  Read the article

• Cocoa : Once and for all, how to really reset the standardUserDefaults

  - by Korion

  I tried using -resetStandardUserDefaults, I tried removing the plist file, none of those really do what I need. I want to reset my preferences completely, as if the app re-installed. Is there a good solution to this? I tried : NSString *appDomain = [[NSBundle mainBundle] bundleIdentifier]; [[NSUserDefaults standardUserDefaults] removePersistentDomainForName:appDomain]; But Xcode complains. Apparently, it doesn't like that the plist file has disappeared.

  Read the article

• Opencv video frame not showing Sobel output

  - by user1016950

  This is a continuation question from Opencv video frame giving me an error I think I closed it off, Im new to Stackoverflow. I have code below that Im trying to see its Sobel edge image. However the program runs but the output is just a grey screen where if I mouseover the cursor disappears. Does anyone see the error? or is it a misunderstanding about the data structures Im using IplImage *frame, *frame_copy = 0; // capture frames from video CvCapture *capture = cvCaptureFromFile( "lightinbox1.avi"); //Allows Access to video propertys cvQueryFrame(capture); //Get the number of frames int nframe=(int) cvGetCaptureProperty(capture,CV_CAP_PROP_FRAME_COUNT); //Name window cvNamedWindow( "video:", 1 ); //start loop for(int i=0;i<nframe;i++){ //prepare capture frame extraction cvGrabFrame(capture); cout<<"We are on frame "<<i<<"\n"; //Get this frame frame = cvRetrieveFrame( capture ); con2txt(frame); frame_copy = cvCreateImage(cvSize(frame->width,frame->height),IPL_DEPTH_8U,frame->nChannels ); //show and destroy frame cvCvtColor( frame,frame,CV_RGB2GRAY); //Create Sobel output frame_copy1 = cvCreateImage(cvSize(frame->width,frame->height),IPL_DEPTH_16S,1 ); cvSobel(frame_copy,frame_copy1,2,2,3); cvShowImage("video:",frame_copy1); cvWaitKey(33);} cvReleaseCapture(&capture);

  Read the article

• find a duplicate entry in an array in constant space and O(n) time [closed]

  - by Anubhav Agarwal

  Possible Duplicate: Algorithm to find a duplicate entry in constant space and O(n) time Given an array of N integer such that only one integer is repeated. Find the repeated integer in O(n) time and constant space. There is no range for the value of integers or the value of N For example given an array of 6 integers as 23 45 67 87 23 47. The answer is 23 (I hope this covers ambiguous and vague part) I searched on the net but was unable to find any such question in which range of integers was not fixed. Also here is an example that answers a similar question to mine but here he created a hash table with the highest integer value in C++.But the cpp does not allow such to create an array with 2^64 element(on a 64-bit computer).

  Read the article

• active_admin/formtastic ignoring polymorphic associations

  - by James Maskell

  I'm currently having trouble with the form for a polymorphic association in active_admin in Ruby on Rails. I have three models set up: offices, companies and users. Both companies and users can own an office. My models are set up as follows: class Office < ActiveRecord::Base belongs_to :ownable, :polymorphic => true end class User < ActiveRecord::Base has_many :offices, :as => :ownable end class Company < ActiveRecord::Base has_many :offices, :as => :ownable end active_admin doesn't allow me to edit the owner on its forms, but does show it correctly on the index and show pages (including links to the company or user). I've tried playing with formtastic to manually create the form but have not had any luck - the "ownable" fields just get ignored and everything else renders properly. To be clear: I want to be able to edit the owner of the Office model on the new and edit fields in active_admin. Can anyone offer any help? :)

  Read the article

< Previous Page | 191 192 193 194 195 196 197 198 199 200 201 202  | Next Page >