Daily Archives

Articles indexed Thursday December 13 2012

Page 2/16 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Slow Gmail attachment download over HTTPS

  - by Todd

  It only affects Gmail. I have tested other HTTP, FTP and HTTPS websites and downloading is fine, at the exact same time the problem is affecting a Gmail attachment download. The symptoms include both: High waiting time, before the download starts (on the order of 30 seconds); AND Very slow download transfer speeds (on the order of 1kbps) It's a very strange problem, and I didn't find any recent issues relating to Google Australia. The account works fine at another site with a different ISP, so it's either a computer configuration or ISP - I lean to the latter.

  Read the article

• ffmpeg add two audio streams to video

  - by Tossin Hausen

  I tried this: ffmpeg -i /sdcard/video/transcode/video.avi -map 0:0,0 -i /sdcard/video/transcode/first.mp3 -map 1:0,1 -i /sdcard/video/transcode/second.mp3 -map 2:0,2 -acodec copy -vcodec py /sdcard/video/transcode/Output.avi to add two audio streams to one video file. But ffmpeg says the number of mappings should match the number of output streams. What is wrong here? I'm trying to work with an Android build of FFmepg "ffmpeg for android beta". "Does not work" means that this uncommunicative Android build of FFmpeg just stops without giving any error message. The -codec copy option does not work with this build. Now I tried the same set of files with the FFmpeg called command line tool that comes with Ubuntu 10. Something (can't say where it is from). The -codec copy option does not work with this FFmpeg too. Here the complete output: m30x:~/movie/Film$ ffmpeg -i input.avi -i first.mp3 -i second.mp3 -map 0 -map 1 -map 2 -acodec copy -vcodec copy output.avi FFmpeg version SVN-r0.5.9-4:0.5.9-0ubuntu0.10.04.1, Copyright (c) 2000-2009 Fabrice Bellard, et al. configuration: --extra-version=4:0.5.9-0ubuntu0.10.04.1 --prefix=/usr --enable-avfilter --enable-avfilter-lavf --enable-vdpau --enable-bzlib --enable-libgsm --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-pthreads --enable-zlib --disable-stripping --disable-vhook --enable-runtime-cpudetect --enable-gpl --enable-postproc --enable-swscale --enable-x11grab --enable-libdc1394 --enable-shared --disable-static libavutil 49.15. 0 / 49.15. 0 libavcodec 52.20. 1 / 52.20. 1 libavformat 52.31. 0 / 52.31. 0 libavdevice 52. 1. 0 / 52. 1. 0 libavfilter 0. 4. 0 / 0. 4. 0 libswscale 0. 7. 1 / 0. 7. 1 libpostproc 51. 2. 0 / 51. 2. 0 built on Jun 12 2012 16:27:34, gcc: 4.4.3 [NULL @ 0x93cfd10]looks like this file was encoded with (divx4/(old)xvid/opendivx) -> forcing low_delay flag Seems stream 0 codec frame rate differs from container frame rate: 30000.00 (30000/1) -> 25.00 (25/1) Input #0, avi, from 'input.avi': Duration: 01:30:33.00, start: 0.000000, bitrate: 901 kb/s Stream #0.0: Video: mpeg4, yuv420p, 576x432, 25 tbr, 25 tbn, 30k tbc Input #1, mp3, from 'first.mp3': Duration: 01:30:32.84, start: 0.000000, bitrate: 63 kb/s Stream #1.0: Audio: mp3, 22050 Hz, stereo, s16, 64 kb/s Input #2, mp3, from 'second.mp3': Duration: 01:30:32.84, start: 0.000000, bitrate: 63 kb/s Stream #2.0: Audio: mp3, 22050 Hz, stereo, s16, 64 kb/s Number of stream maps must match number of output streams Merging only one audio stream with the video stream works with Ubuntu and Android version of FFmpeg. Here the complete output: ffmpeg -i input.avi -i first.mp3 -map 0 -map 1 -acodec copy -vcodec copy output.avi FFmpeg version SVN-r0.5.9-4:0.5.9-0ubuntu0.10.04.1, Copyright (c) 2000-2009 Fabrice Bellard, et al. configuration: --extra-version=4:0.5.9-0ubuntu0.10.04.1 --prefix=/usr --enable-avfilter --enable-avfilter-lavf --enable-vdpau --enable-bzlib --enable-libgsm --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-pthreads --enable-zlib --disable-stripping --disable-vhook --enable-runtime-cpudetect --enable-gpl --enable-postproc --enable-swscale --enable-x11grab --enable-libdc1394 --enable-shared --disable-static libavutil 49.15. 0 / 49.15. 0 libavcodec 52.20. 1 / 52.20. 1 libavformat 52.31. 0 / 52.31. 0 libavdevice 52. 1. 0 / 52. 1. 0 libavfilter 0. 4. 0 / 0. 4. 0 libswscale 0. 7. 1 / 0. 7. 1 libpostproc 51. 2. 0 / 51. 2. 0 built on Jun 12 2012 16:27:34, gcc: 4.4.3 [NULL @ 0x9bfad10]looks like this file was encoded with (divx4/(old)xvid/opendivx) -> forcing low_delay flag Seems stream 0 codec frame rate differs from container frame rate: 30000.00 (30000/1) -> 25.00 (25/1) Input #0, avi, from 'input.avi': Duration: 01:30:33.00, start: 0.000000, bitrate: 901 kb/s Stream #0.0: Video: mpeg4, yuv420p, 576x432, 25 tbr, 25 tbn, 30k tbc Input #1, mp3, from 'first.mp3': Duration: 01:30:32.84, start: 0.000000, bitrate: 63 kb/s Stream #1.0: Audio: mp3, 22050 Hz, stereo, s16, 64 kb/s Output #0, avi, to 'output.avi': Stream #0.0: Video: mpeg4, yuv420p, 576x432, q=2-31, 90k tbn, 25 tbc Stream #0.1: Audio: libmp3lame, 22050 Hz, stereo, s16, 64 kb/s Stream mapping: Stream #0.0 -> #0.0 Stream #1.0 -> #0.1 Press [q] to stop encoding frame= 6157 fps=6156 q=-1.0 size= 31667kB time=246.28 bitrate=1053.3kbits/s Do you have an idea why it does not work with two audio streams? By the way, ffmpeg -i input_with_first_audio_stream.avi -i second.mp3 -acodec copy -vcodec copy output_two_audio_streams.avi -newaudio works with both versions of ffmpeg that I use, but the first audio stream is played too fast (x10 or more), while the second audio stream is played correct. Many thanks in advance and sorry for my unconventional question and outdated versions of ffmpeg. But I am a lamer and it is not so easy for me to compile from the source (especially for the Android version). I will try to compile an up to date version of ffmpeg with Ubuntu, but I don't have much free time.

  Read the article

• wget-ing protected content with exported cookies

  - by XXL

  I have exported a pair of cookies from Firefox that are valid for the URL in question and tried accessing/downloading the protected content off that address, but the end result is a return to the login page. I have tried doing the same thing for 3 other websites with similar outcome. Any clues as to what I might be doing wrong? The syntax I'm using: wget --load--cookies=FILE URL ----------------------------------------------- DEBUG output created by Wget 1.12 on linux-gnu. Stored cookie www.x.org -1 (ANY) / <permanent> <insecure> [expiry 1901-12-13 22:25:44] c_secure_login lz8xZQ%3D%3D Stored cookie www.x.org -1 (ANY) / <permanent> <insecure> [expiry 1901-12-13 22:25:44] c_secure_pass 2fd4e1c67a2d28fced849ee1bb76e74a Stored cookie www.x.org -1 (ANY) / <permanent> <insecure> [expiry 1901-12-13 22:25:44] c_secure_uid GZX4TDA%3D --2011-01-14 13:57:02-- www.x.org/download.php?id=397003 Resolving www.x.org... 1.1.1.1 Caching www.x.org => 1.1.1.1 Connecting to www.x.org|1.1.1.1|:80... connected. Created socket 5. Releasing 0x0943ef20 (new refcount 1). ---request begin--- GET /download.php?id=397003 HTTP/1.0 User-Agent: Wget/1.12 (linux-gnu) Accept: */* Host: www.x.org Connection: Keep-Alive ---request end--- HTTP request sent, awaiting response... ---response begin--- HTTP/1.1 302 Found Date: Fri, 14 Jan 2011 11:26:19 GMT Server: Apache X-Powered-By: PHP/5.2.6-1+lenny8 Set-Cookie: PHPSESSID=5f2fd97103f8988554394f23c5897765; path=/ Expires: Thu, 19 Nov 1981 08:52:00 GMT Cache-Control: no-store, no-cache, must-revalidate, post-check=0, pre-check=0 Pragma: no-cache Location: www.x.org/login.php?returnto=download.php%3Fid%3D397003 Vary: Accept-Encoding Content-Length: 0 Keep-Alive: timeout=15, max=100 Connection: Keep-Alive Content-Type: text/html ---response end--- 302 Found Stored cookie www.x.org -1 (ANY) / <session> <insecure> [expiry none] PHPSESSID 5f2fd97103f8988554394f23c5897765 Registered socket 5 for persistent reuse. Location: www.x.org/login.php?returnto=download.php%3Fid%3D397003 [following] Skipping 0 bytes of body: [] done. --2011-01-14 13:57:02-- www.x.org/login.php?returnto=download.php%3Fid%3D397003 Reusing existing connection to www.x.org:80. Reusing fd 5. ---request begin--- GET /login.php?returnto=download.php%3Fid%3D397003 HTTP/1.0 User-Agent: Wget/1.12 (linux-gnu) Accept: */* Host: www.x.org Connection: Keep-Alive Cookie: PHPSESSID=5f2fd97103f8988554394f23c5897765 ---request end--- HTTP request sent, awaiting response... ---response begin--- HTTP/1.1 200 OK Date: Fri, 14 Jan 2011 11:26:20 GMT Server: Apache X-Powered-By: PHP/5.2.6-1+lenny8 Expires: Thu, 19 Nov 1981 08:52:00 GMT Cache-Control: no-store, no-cache, must-revalidate, post-check=0, pre-check=0 Pragma: no-cache Vary: Accept-Encoding Content-Length: 2171 Keep-Alive: timeout=15, max=99 Connection: Keep-Alive Content-Type: text/html ---response end--- 200 OK Length: 2171 (2.1K) [text/html] Saving to: `x.out' 0K .. 100% 18.7M=0s 2011-01-14 13:57:02 (18.7 MB/s) - `x.out' saved [2171/2171]

  Read the article

• SQLAuthority News – Speaking at Southeast Asia SharePoint Conference 2013 – Singapore

  - by pinaldave

  Two years ago I spoke at Southeast Asia SharePoint Conference 2011, Singapore and I had a fantastic time to present to the Singapore audience. The session was very well received and lots of interest was generated. The event is back again this year and with much bigger scale. I will be presenting on SQL Server and Sharepoint subject at the conference. Session Details: Title: Performance in 60 Seconds – Database Tricks Every SharePoint Developer & Admin MUST Know Abstract: SharePoint Developers and System Administrators often come across situations where they face a slow server response, even though their hardware specifications are above  par. This session is for all the SharePoint Developers who want their server to perform at blazing fast speed but want to invest very little time to make it happen. We will go over various database tricks which require absolutely no time to master and require practically no SQL coding at all. After attending this session, Developers will only need 60 seconds to improve performance of their database server in their SharePoint implementation. Date and Time: January 18, 20013 - 3:15 PM-4:15 PM Location: Max Atria is located at Singapore Expo, 1 Expo Drive, Singapore Tel 65 6403 2160 This session will cover lots of interesting tips and tricks about SQL Server and SharePoint co-exists together. I promise that every attendee will walk out with a trick which they can walk out of session and directly apply to their production server to improve its performance. The event is going to be again fantastic event – if you are in Singapore – you must not miss this event. If you are planning vacation – this is the right time to take days off and travel to Singapore for vacation. The event features over 30 sessions to choose from, focus on three areas of business gain: Exploring Information, Improving Productivity and Making it Work. This event has an excellent line up of international speakers (speakers traveling from the USA, Australia, New Zealand, Sri Lanka and India). Register early to reserve a spot at your choice of more than 30 classes taught by Microsoft Certified Masters, MVPs, and other top SharePoint experts! Here I have attempted to answer a few of the questions which every SharePoint professional half: Which sessions suit my skill level? Click here. What sessions are right for me? Click here. Which sessions are of my interests? Click here. Which sessions are on when? Click here. If you register by next Friday, 14, December – you can save $126 on the regular price of the conference. Prizes, Giveaways and … I love conference goodies – I collect them as a souvenir . This event is known for its generous prizes. The first 100 people to register on the day will get a SPECIAL gift at the event. Additionally there are exhibitor booth give away too. Here is the page listing all the prizes and giveaways. Do leave a comment or send me email if you are going to the event, we can sit together and have a coffee. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority News, T SQL, Technology

  Read the article

• Avoiding the Black Hole of Leads

  - by Charles Knapp

  Sales says, "Marketing doesn’t deliver enough qualified leads. So, we generate 90% of our own leads." Meanwhile, Marketing says, "We generate most of the leads. But, Sales doesn’t contact them quickly enough, while the lead is still interested." According to Sirius Decisions: Up to 90% of leads never make it to closure Sales works on only 11% of the leads supplied by Marketing Only 18% of the leads Sales accepts convert to opportunities Yet, 45% of prospects typically buy a product from someone within 12 months The root cause of these commonplace complaints is a disconnect between the funnels of marketing and sales. Unfortunately, we often see companies with an assortment of poorly integrated marketing tools. It takes too long and too many people to move the data around, scrub it, upload it from one system to another, and get it routed to the right sales teams. As a result, leads fall through the cracks, contextual information is lost, and by the time sales actually contacts a customer it may be too late. Sales automation alone is not enough. Marketing automation (including social) is not enough. Sales and Marketing must work together. It’s time to connect the silos of marketing and sales pipelines and analytics. It’s time for integrated Sales and Marketing automation. Integrated pipelines improve lead quality and timeliness. Marketing systems can track a rich set of contextual information about a prospect–self-disclosed information about interests, content viewed, and so on. This insight can equip the sales rep with rich information to make a face-to-face conversation more relevant and more likely to convert to the next stage in the sales process. Integrated lead to revenue (LTR) management provides end-to-end visibility, enabling the company to measure what is working. Marketing can measure its impact on revenue and other business outcomes, and sales can harness and redirect marketing investments to areas where they most help achieve sales objectives. It’s a win-win play. Marketing delivers more leads that are qualified, cuts cost per lead, and demonstrates a strong Return on Marketing Investment (ROMI). Sales spends more time with warm leads and less time on cold calls, achieves higher close rates, and delivers more revenue. Learn more by attending our Integrated Sales and Marketing session at the upcoming CloudWorld conferences. Or, visit our Sales and Marketing Cloud Service site for videos and other learning resources.

  Read the article

• RPi and Java Embedded GPIO: Big Data and Java Technology

  - by hinkmond

  Java Embedded and Big Data go hand-in-hand, especially as demonstrated by prototyping on a Raspberry Pi to show how well the Java Embedded platform can perform on a small embedded device which then becomes the proof-of-concept for industrial controllers, medical equipment, networking gear or any type of sensor-connected device generating large amounts of data. The key is a fast and reliable way to access that data using Java technology. In the previous blog posts you've seen the integration of a static electricity sensor and the Raspberry Pi through the GPIO port, then accessing that data through Java Embedded code. It's important to point out how this works and why it works well with Java code. First, the version of Linux (Debian Wheezy/Raspian) that is found on the RPi has a very convenient way to access the GPIO ports through the use of Linux OS managed file handles. This is key in avoiding terrible and complex coding using register manipulation in C code, or having to program in a less elegant and clumsy procedural scripting language such as python. Instead, using Java Embedded, allows a fast way to access those GPIO ports through those same Linux file handles. Java already has a very easy to program way to access file handles with a high degree of performance that matches direct access of those file handles with the Linux OS. Using the Java API java.io.FileWriter lets us open the same file handles that the Linux OS has for accessing the GPIO ports. Then, by first resetting the ports using the unexport and export file handles, we can initialize them for easy use in a Java app. // Open file handles to GPIO port unexport and export controls FileWriter unexportFile = new FileWriter("/sys/class/gpio/unexport"); FileWriter exportFile = new FileWriter("/sys/class/gpio/export"); ... // Reset the port unexportFile.write(gpioChannel); unexportFile.flush(); // Set the port for use exportFile.write(gpioChannel); exportFile.flush(); Then, another set of file handles can be used by the Java app to control the direction of the GPIO port by writing either "in" or "out" to the direction file handle. // Open file handle to input/output direction control of port FileWriter directionFile = new FileWriter("/sys/class/gpio/gpio" + gpioChannel + "/direction"); // Set port for input directionFile.write("in"); // Or, use "out" for output directionFile.flush(); And, finally, a RandomAccessFile handle can be used with a high degree of performance on par with native C code (only milliseconds to read in data and write out data) with low overhead (unlike python) to manipulate the data going in and out on the GPIO port, while the object-oriented nature of Java programming allows for an easy way to construct complex analytic software around that data access functionality to the external world. RandomAccessFile[] raf = new RandomAccessFile[GpioChannels.length]; ... // Reset file seek pointer to read latest value of GPIO port raf[channum].seek(0); raf[channum].read(inBytes); inLine = new String(inBytes); It's Big Data from sensors and industrial/medical/networking equipment meeting complex analytical software on a small constraint device (like a Linux/ARM RPi) where Java Embedded allows you to shine as an Embedded Device Software Designer. Hinkmond

  Read the article

• systemstate dump ??

  - by JaneZhang(???)

          ???????????????hang????,????????systemstate dump?????????,?????,????????,???????????????,????systemstate dump?????????????       ??????,????????systemstate dump, ?????“WAITED TOO LONG FOR A ROW CACHE ENQUEUE LOCK”?        systemstate dump???????????,??????:??????,???????,????dump????????,???????M????)1. ?sysdba???????:$sqlplus / as sysdba??$sqlplus -prelim / as sysdba <==??????????hang?????SQL>oradebug setmypidSQL>oradebug unlimit;SQL>oradebug dump systemstate 266;?1~2??SQL>oradebug dump systemstate 266;?1~2??SQL>oradebug dump systemstate 266;SQL>oradebug tracefile_name;==>????????2. ????systemstate dump,??????hang analyze??????????????????$sqlplus / as sysdba??$sqlplus -prelim / as sysdba <==??????????hang?????SQL>oradebug setmypidSQL>oradebug unlimit;SQL>oradebug dump hanganalyze 3?1~2??SQL>oradebug dump hanganalyze 3?1~2??SQL>oradebug dump hanganalyze 3SQL>oradebug tracefile_name;==>??????????RAC???,????????????systemstate dump,???????????(?????????):$sqlplus / as sysdba??$sqlplus -prelim / as sysdba <==??????????hang?????SQL>oradebug setmypidSQL>oradebug unlimitSQL>oradebug -g all dump systemstate 266  <==-g all ??????????dump?1~2??SQL>oradebug -g all dump systemstate 266?1~2??SQL>oradebug -g all dump systemstate 266?RAC???hang analyze:SQL>oradebug setmypidSQL>oradebug unlimitSQL>oradebug -g all hanganalyze 3?1~2??SQL>oradebug -g all hanganalyze 3?1~2??SQL>oradebug -g all hanganalyze 3?????????????????systemstate dump,?????????????backgroud_dump_dest??diag trace???????????????????????????,?????hang?,?????systemstate dump?????:10:   dump11:   dump + global cache of RAC256: short stack (????)258: dump(???lock element) + short stack (????)266: 256+10 -->short stack+ dump267: 256+11 -->short stack+ dump + global cache of RAClevel 11? 267? dump global cache, ??????trace ??,??????????????,????????,???266,??????dump?????????,????????????????????short stack????,???????,??2000???,??????30??????????,????level 10 ?? level 258, level 258 ? level 10????short short stack, ??level 10?????lock element data.?????systemstate dump???,??????level?????:??????37???:-rw-r----- 1 oracle oinstall    72721 Aug 31 21:50 rac10g2_ora_31092.trc==>256 (short stack, ????2K)-rw-r----- 1 oracle oinstall  2724863 Aug 31 21:52 rac10g2_ora_31654.trc==>10    (dump,????72K )-rw-r----- 1 oracle oinstall  2731935 Aug 31 21:53 rac10g2_ora_32214.trc==>266 (dump + short stack ,????72K)RAC:-rw-r----- 1 oracle oinstall 55873057 Aug 31 21:49 rac10g2_ora_30658.trc ==>11   (dump+global cache,????1.4M)-rw-r----- 1 oracle oinstall 55879249 Aug 31 21:48 rac10g2_ora_28615.trc ==>267 (dump+global cache+short stack,????1.4M) ??,??????dump global cache(level 11?267,???????????????)??????????,?????????systemstate dump ??

  Read the article

• Fusion Middleware 11gR1 : 2012?12??????

  - by Hiro

  2012?12? (2012/12/26 ??)?Fusion Middleware 11gR1 ?????????????? ?????????????2??????? 1. Oracle WebLogic IntegrationOracle WebLogic Integration 10gR3 (10.3.1) ???Media Pack???????"10gR3"???????????????????????"11g Release 1"?Media Pack??????????????????? ??????????????Oracle WebLogic Server 10.3 or 10.3.1 ????????????????????????????????????????????My Oracle Support????????????????? ? ??????????????AIX, HP-UX Itanium, Linux x86, Linux x86-64, Solaris (SPARC), Windows (32-bit), Windows x64, Other Platforms ?????? 2. Oracle Data IntegratorOracle Data Integrator Companion ?????????????"11g (11.1.1.6.3)" ???????????? ???????????????AIX, HP-UX Itanium, Linux x86, Linux x86-64, Solaris (SPARC), Windows (32-bit), Windows x64 ?????? ???????????????

  Read the article

• JCP.Next - Early Adopters of JCP 2.8

  - by Heather VanCura

  JCP.Next is a series of three JSRs (JSR 348, JSR 355 and JSR 358), to be defined through the JCP process itself, with the JCP Executive Committee serving as the Expert Group. The proposed JSRs will modify the JCP's processes  - the Process Document and Java Specification Participation Agreement (JSPA) and will apply to all new JSRs for all Java platforms.   The first - JCP.next.1, or more formally JSR 348, Towards a new version of the Java Community Process - was completed and put into effect in October 2011 as JCP 2.8. This focused on a small number of simple but important changes to make our process more transparent and to enable broader participation. We're already seeing the benefits of these changes as new and existing JSRs adopt the new requirements. The second - JSR 355, Executive Committee Merge, is also Final. You can read the JCP 2.9 Process Document .  As part of the JSR 355 Final Release, the JCP Executive Committee published revisions to the JCP Process Document (version 2.9) and the EC Standing Rules (version 2.2).  The changes went into effect following the 2012 EC Elections in November. The third JSR 358, A major revision of the Java Community Process was submitted in June 2012.  This JSR will modify the Java Specification Participation Agreement (JSPA) as well as the Process Document, and will tackle a large number of complex issues, many of them postponed from JSR 348. For these reasons, the JCP EC (acting as the Expert Group for this JSR), expects to spend a considerable amount of time working on. The JSPA is defined by the JCP as "a one-year, renewable agreement between the Member and Oracle. The success of the Java community depends upon an open and transparent JCP program.  JSR 358, A major revision of the Java Community Process, is now in process and can be followed on java.net. The following JSRs and Spec Leads were the early adopters of JCP 2.8, who voluntarily migrated their JSRs from JCP 2.x to JCP 2.8 or above.  More candidates for 2012 JCP Star Spec Leads! JSR 236, Concurrency Utilities for Java EE (Anthony Lai/Oracle), migrated April 2012 JSR 308, Annotations on Java Types (Michael Ernst, Alex Buckley/Oracle), migrated September 2012 JSR 335, Lambda Expressions for the Java Programming Language (Brian Goetz/Oracle), migrated October 2012 JSR 337, Java SE 8 Release Contents (Mark Reinhold/Oracle) – EG Formation, migrated September 2012 JSR 338, Java Persistence 2.1 (Linda DeMichiel/Oracle), migrated January 2012 JSR 339, JAX-RS 2.0: The Java API for RESTful Web Services (Santiago Pericas-Geertsen, Marek Potociar/Oracle), migrated July 2012 JSR 340, Java Servlet 3.1 Specification (Shing Wai Chan, Rajiv Mordani/Oracle), migrated August 2012 JSR 341, Expression Language 3.0 (Kin-man Chung/Oracle), migrated August 2012 JSR 343, Java Message Service 2.0 (Nigel Deakin/Oracle), migrated March 2012 JSR 344, JavaServer Faces 2.2 (Ed Burns/Oracle), migrated September 2012 JSR 345, Enterprise JavaBeans 3.2 (Marina Vatkina/Oracle), migrated February 2012 JSR 346, Contexts and Dependency Injection for Java EE 1.1 (Pete Muir/RedHat) – migrated December 2011

  Read the article

• Configuration Tips for better Performance with ADF Mobile Apps

  - by SRINI INDLA

  Some tips to keep in mind to make sure ADF Mobile application's performance is optimal: 1. Select release mode in deployment profile. This is perhaps the most important thing to remember to ensure best performance for ADF Mobile Apps. Selecting this option causes the deployer to package optimized JVM and minified JS libs with the mobile app there by significantly improving the over all performance of the application. 2. For iOS you do not need to do anything else other than selecting  release mode in deploy profile. However, on Android you have to create a keystore and configure it in JDev --> Tools --> Preferences --> ADF Mobile --> Platforms : Android as shown in the snapshot below 3. Steps for generating the Keystore for Android using keytool :  4. Logging level setting in logging.properties: Make sure the log level is set to SEVERE for both framework logger as well as the application logger as follows oracle.adfmf.framework.level=SEVERE oracle.adfmf.application.level=SEVERE 5. When using SOAP WebServices with WebService Data Control make sure you select the option to copy the WSDL. This will cause the JDev to download the WSDL and all the XSDs referenced by the WSDL from the server at design time and package them with the application during deployment. This way the application does not incur the cost of downloading these resources at run time from the device.

  Read the article

• Multiple Tomcat vulnerabilities in Oracle Health Sciences LabPas

  - by RitwikGhoshal

  CVE DescriptionCVSSv2 Base ScoreComponentProduct and Resolution CVE-2012-2733 Improper Input Validation vulnerability 5.0 Apache Tomcat Oracle Health Sciences LabPas upgrade to Apache Tomcat v6.0.36 CVE-2012-3439 DIGEST authentication implementation issues 5.0 CVE-2012-3546 Security constraints bypass vulnerability 5.5 CVE-2012-4431 CSRF prevention filter bypass vulnerability 4.3 CVE-2012-4534 Denial of Service (DoS) vulnerability 4.3 This notification describes vulnerabilities fixed in third-party components that are included in Oracle's product distributions.Information about vulnerabilities affecting Oracle products can be found on Oracle Critical Patch Updates and Security Alerts page.

  Read the article

• Announcing Oracle Audit Vault and Database Firewall

  - by Troy Kitch

  Today, Oracle announced the new Oracle Audit Vault and Database Firewall product, which unifies database activity monitoring and audit data analysis in one solution. This new product expands protection beyond Oracle and third party databases with support for auditing the operating system, directories and custom sources. Here are some of the key features of Oracle Audit Vault and Database Firewall: Single Administrator Console Default Reports Out-of-the-Box Compliance Reporting Report with Data from Multiple Source Types Audit Stored Procedure Calls - Not Visible on the Network Extensive Audit Details Blocking SQL Injection Attacks Powerful Alerting Filter Conditions To learn more about the new features in Oracle Audit Vault and Database Firewall, watch the on-demand webcast.

  Read the article

• Hey iPhone 5 users, here is the official Google Maps App from Google

  - by Gopinath

  Here is a big news to all the iPhone 5 users which brings great relief. Google officially released Google Maps Apps for iOS 6 and it’s available in App Store. The app is optimized for iPhone 5 and includes turn-by-turn voice guided navigation similar to the one found on Android devices. Also the app features transit and walking directions, 2D and 3D maps, Street View and aerial imagery, and more. If you don’t find the application on App Store, wait for sometime as the rollout may be slowly covering all the regions.

  Read the article

• Five geeky things you must do with your Android Smartphone

  - by Gopinath

  Android is the Windows of next generation. Its open, free, widely adopted and smart enough to outsmart Apple’s iOS. It’s a stolen product and cheap imitation of iOS, but Steve Job’s once quoted saying good artists copy and great artists steal. Alright, this post is not about Android vs iOS or is it really stolen or not. Android is a great OS for mobile devices and it lets you do amazing through mobiles.  In this post I want to write about the geeky things we can do with an Android Smartphone. Control your computer using mobile Assume that it is a lazy weekend and you are on a couch watching movies on a laptop which is a meter away. Now you want to adjust volume or skip a scene/song. How to control your laptop without moving out of couch? Just install Universal Remote free app on your smartphone and start control your computer using phone. Universal Remove app controls computers over Wifi or Bluetooth networks with dedicated remote controls for various media players and applications like YouTube, VLC & Spotify.  The application is very easy to use and works amazingly well in controlling computers. Few of the remote controls provided in the app are – Mouse, Keyboard, Media Controls, Power, Start, Windows Media Player, VLC Player,  YouTube. There is also paid version of this app with additional remotes, but for most of the users Free version is good enough. Stream YouTube videos playing on you mobile to computer You can stream YouTube videos playing on your mobile to computer/smart tv. This is something similar to Apple’s most popular AirPlay feature, but works only with YouTube videos. To start streaming videos install Google’s YouTube Remote on your smartphone, open youtube.com/leanback on your computer  and pair up mobile with computer. Once the pairing is done, videos played on YouTube Remote app will be streamed on to your computer. Access your mobile using any web browser – send/receive SMS, view photos/call logs, etc. Want to control your mobile phone using a computer? Install AirDroid app on your phone and start controlling your phone using computer browser – send and receive messages, view call logs, play music, upload/download files, edit contacts and many more. At times it’s lot of fun to access mobile using a big screen devices like laptops. Launch a webpage on your mobile browser using your computer With Google Chrome to Phone installed on your computer and mobile, you can send links and other information from Chrome browser to your Android device. With a click on Chrome browser, the current webpage of Chrome browser will be automatically launched on Android device. This is very handy when you want to send links, send driving direction to mobile using Google Maps and launch phone dialer with number selected on webpage. Install Apps on mobile using computer To install apps on your smartphone you really don’t need to touch it. Open any web browser, sing in to Google Play with your Google id that is associated with smartphone and start installing apps on to your phone right from the browser. As you browse apps on Google Play store, you find Install button and all you need to do is to just click Install. Google will automatically installs app on your mobile within few seconds.

  Read the article

• Design Patterns for these scenarios

  - by user1899749

  Please help me to find design patterns for following situations. Situation 1: how can a smart robot use Wi-Fi? Situation 2: How can a Smart robot automatically go to rechargeable unit while there is no remote signal? Situation 3: Voice recognition component (If homeowner itself at home and motion detection is off then how can Smart Robot voice recognition component will recognize those very sensitive sentences) Situation 4: Motion detection component (How can Smart Robot send video stream on cell phone while homeowner/resident driving) I am looking for the design patterns for above Situations to answer following question. if not using design patterns, then what’re the difficulties?

  Read the article

• What is the best Programming Language for Kiosk Application? [closed]

  - by Jen Lin

  I need your suggestions guys regarding the project I'm planning to create. I want to create a kiosk software/application that is capable to access database in a server. (So, there's a networking here..)Because the information that will be displayed in a Kiosk screen will be coming from a database in other computer. So my problem here is, I don't know which programming language is the best for this kind of application. I'm thinking about using Visual Basic 6.0 since my group is comfortable using this programming language, but I also want to consider the design. I don't like a plain button. Hope to hear from you guys, thanks much :)

  Read the article

• Reuse Business Logic between Web and API

  - by fesja

  We have a website and two mobile apps that connect through an API. All the platforms do the exactly same things. Right now the structure is the following: Website. It manages models, controllers, views for the website. It also executes all background tasks. So if a user create a place, everything is executed in this code. API. It manages models, controllers and return a JSON. If a user creates a place on the mobile app, the place is created here. After, we add a background task to update other fields. This background task is executed by the Website. We are redoing everything, so it's time to improve the approach. Which is the best way to reuse the business logic so I only need to code the insert/edit/delete of the place & other actions related in just one place? Is a service oriented approach a good idea? For example: Service. It has the models and gets, adds, updates and deletes info from the DB. Website. It send the info to the service, and it renders HTML. API. It sends info to the service, and it returns JSON. Some problems I have found: More initial work? Not sure.. It can work slower. Any experience? The benefits: We only have the business logic in one place, both for web and api. It's easier to scale. We can put each piece on different servers. Other solutions Duplicate the code and be careful not to forget anything (do tests!) DUplicate some code but execute background tasks that updates the related fields and executes other things (emails, indexing...) A "small" detail is we are 1.3 person in backend, for now ;)

  Read the article

• Queuing rpc calls

  - by alfa64

  i'm designing a system wich listen to json rpc calls from clients, piles it up inside a list, and if it gets full it should store them in a DB and keep recieving calls. My original plan is to listen to the rpc calls from Perl with the json-rpc and put them in the array. The clients do some long polling in another server to get responses as they appear. What is this blocking/noblocking thing? Should i do a script for node.js to listen to the calls? What do you think is a good practice in this case? The objective is to listen as much calls as possible.

  Read the article

• Internal and external API architecture

  - by Tacomanator

  The company I work for maintains a successful SaaS product that grew "organically" over the years. We are planning to expand the line with a suite of new products that will share data with the existing product. To support this, we are looking to consolidate business logic into a single place: a web service layer. The WS layer will be used by: The web applications A tool to import data A tool to integrate with other client software (not an API per se) We also want to create an API that can be used by our customers that are capable of using it to create their own integrations. We are struggling with the following question: Should the internal API (aka the WS layer) and the external API be one in the same, with security and permission settings to control what can be done by who, or should they be two separate applications where the external API just calls the internal API like any other application? So far in our debate it seems that separating them may be more secure, but will add overhead. What have others done in a similar situation?

  Read the article

• unity: how to have a window on all workspaces

  - by noumenon

  I'm using Precise (12.04.1) and I'm using Unity. I have 3 workspaces. I want a particular window/application (say firefox) to be present on all workspaces. This is easy to do on something like LXDE (e.g. Lubuntu) where I just have to right-click the titlebar and select "show on all workspaces". Then no matter which workspace I move to, the desired window/app is present on each one. I can't find a way to do this in Unity. Please help.

  Read the article

• Is it possible to use multiple desktop environments on same system?

  - by Kshitiz Sharma

  I am using Ubuntu 12.04. I want to try out KDE and other desktop environments. But I'm not sure if I'll like them enough to switch permanently. I want to be safe and make a transition in a piecemeal fashion. Is it possible to install KDE on Ubuntu and yet not do away with the default Unity shell? Could I install multiple desktop environments and switch between them by tweaking some startup configuration and then rebooting?

  Read the article

• How to get BURG on 12.10 (Quantal Quetzal)

  - by Warpspace

  I've been using BURG for years to get rid of the eye sore that is the standard GRUB interface. When I upgraded to Quantal, the repository does not contain the updated information. I.e. after I add sudo add-apt-repository ppa:n-muench/burg sudo apt-get update I get the annoying response W: Failed to fetch http://ppa.launchpad.net/n-muench/burg/ubuntu/dists/quantal/main/binary-amd64/Packages 404 Not Found It's been like this for a month, contrary to various websites which say it works. Is BURG being maintained? Have they created a better alternative (such as integration with GRUB, like it should have been in the first place). How do I get a decent-looking bootloader?

  Read the article

• Tor Browser Failing to Load

  - by Ben

  Dec 12 22:32:25.313 [notice] Tor v0.2.3.22-rc (git-4a0c70a817797420) running on Linux. Dec 12 22:32:25.313 [notice] Tor can't help you if you use it wrong! Learn how to be safe at https://www.torproject.org/download/download#warning Dec 12 22:32:25.313 [notice] Read configuration file "/etc/tor/torrc". Dec 12 22:32:25.319 [notice] Initialized libevent version 2.0.19-stable using method epoll (with changelist). Good. Dec 12 22:32:25.319 [notice] Opening Socks listener on 127.0.0.1:9050 Dec 12 22:32:25.319 [warn] Could not bind to 127.0.0.1:9050: Address already in use. Is Tor already running? Dec 12 22:32:25.319 [warn] Failed to parse/validate config: Failed to bind one of the listener ports. Dec 12 22:32:25.319 [err] Reading config failed--see warnings above. I've tried reinstalling it and I always get this error after powering off and back on, despite it working fine directly after the install...

  Read the article

• "The connection has timed out" - Please help!

  - by gon

  I recently installed a fresh Ubuntu 12.04 LTS on a desktop, and the installation itself was successful (other than 'grub rescue' issue that I encountered but fixed) but this connection problem is really giving me a headache. Symptoms: 1. When I open the FireFox browser and try to connect to a website, it just hangs for a while saying "Connecting..." but eventually loads an error page "The connection has timed out". 2. It's not a browser problem (and I tried setting ipv6 thing to "true" at about:config) because running "sudo apt-get install [some-random-package]" at terminal fails ("E: Unable to locate package [package]") too. All other operations that need internet access are not working. 3. I certainly see a wired network (called "eth1") at the Network Manager, and it says "Connection Established" after disconnecting and then connecting again. I have tried almost everything that could be found from google search results still no luck. Their problems slightly differ from mine or the solutions just don't work. By the way it didn't have internet access when installing Ubuntu 12.04. (I ignored the message that I need internet to install Ubuntu) Could this be a problem? I'm sorry I don't remember if internet worked or not on the previous version of Ubuntu. :( I would really appreciate your help... I don't even know what more to do if this fails too.. Thanks!! Thanks for your comment. Here is the result of ifconfig: eth0 Link encap:Ethernet HWaddr 78:ac:c0:3d:b2:b9 inet addr:10.10.65.185 Bcast:10.10.65.255 Mask:255.255.255.0 inet6 addr: fe80::7aac:c0ff:fe3d:b2b9/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3907 errors:0 dropped:0 overruns:0 frame:0 TX packets:771 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:393118 (393.1 KB) TX bytes:73472 (73.4 KB) Interrupt:16 eth1 Link encap:Ethernet HWaddr 78:ac:c0:3d:b2:b8 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:4 errors:0 dropped:0 overruns:0 frame:0 TX packets:4 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:204 (204.0 B) TX bytes:204 (204.0 B) route -n: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 10.10.65.1 0.0.0.0 UG 0 0 0 eth0 10.10.65.0 0.0.0.0 255.255.255.0 U 1 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth0 /etc/resolv.conf: # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 8.8.8.8 nameserver 8.8.4.4 nameserver 10.81.1.8 nameserver 10.1.2.10 nameserver 127.0.0.1 search yamatake.local /etc/network/interfaces: auto lo iface lo inet loopback #auto eth0 #iface eth0 inet dhcp #auto eth1 #iface eth1 inet dhcp And I'll also include the result of 'sudo lshw -C network' in case it might help: *-network description: Ethernet interface product: NetXtreme BCM5764M Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 10 serial: 78:ac:c0:3d:b2:b9 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.121 duplex=full firmware=5764m-v3.35 ip=10.10.65.185 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:93 memory:fc000000-fc00ffff *-network description: Ethernet interface product: NetXtreme BCM5764M Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:01:00.0 logical name: eth1 version: 10 serial: 78:ac:c0:3d:b2:b8 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.121 duplex=full firmware=5764m-v3.35 latency=0 link=no multicast=yes port=twisted pair speed=100Mbit/s resources: irq:94 memory:fb000000-fb00ffff

  Read the article

• My laptop does not have sound and the video reproduces it very rapidly. ubuntu 12.04

  - by user48221

  Once my laptop was fallen and the wi-fi broke, lead her to repairing and when they returned me already it had wi-fi again, but I realized that it did not have sound. In sound configuration it could not raise him, to know if it was a problem of the horns I connected a few headphones and neither it was listened. Because of it I knew that it was a problem of the software, and another problem that I saw, it was that the video player was going too rapidly as if it was advancing him. Where it leads her to arranging they say that they did not touch anything of software, alone they repaired the device of the wi-fi. How I can fix it?

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >