Monthly Archives

Articles indexed in December 2012

Page 215/287 | < Previous Page | 211 212 213 214 215 216 217 218 219 220 221 222  | Next Page >

  • Western Digitial My Book: Can't access the data on the drive

    - by Bryan Denny
    My girlfriend has this external hard drive by Western Digital called a My Book. When the external drive is connected, it does not show it as an accessible disk drive on the computer. However, it shows up fine in Device Manager: I can also see it in Disk Management, but the volume is not mapped to a drive letter, nor can I change the drive letter: It only gives me access to Delete Volume: I would rather not lose the data on the drive if possible. What can I do from here to get to the data? Things I've tried/know: Uninstall drivers and re-install them Device does the same thing when attach to either her Win7 laptop or my Win8 laptop I don't think there's an issue with the HDD itself. No clicking noises, etc. I ran Western Digital Data LifeGuard Diangostics (DLGDIAG) and the SMART Status was a "PASS", all of the SMART Disk Information looked fine. I haven't had the time to run the diag tests yet but I do not believe it's a mechanical issue. The hard drive is inside of an enclosure, I have not attempted to pry the drive out yet. How can I get Windows to properly detect this drive?

    Read the article

  • Strange sound behavior

    - by caarlos0
    First of all, sorry for the tittle. English isn't my native language, and I can't find a word to describe the strange behavior I'm getting here. In the most simple explanation, is like sound keeps going down and up again... Think in a kid with that old radios that have a circled volume button. Think like these kid keeps "turning" the volume button. That is the behavior I'm getting here. At first, I believed that it was a pulseaudio issue, but, it isn't. I followed the wiki part I think that should be my problem, but it didn't work. After that, as I'm using XFCE, I didn't really need pulseaudio, so I removed it and stays with a clean alsa, hopping that will fix my problem. Sweet mistake. It really looks like a kid looking for trouble. I believed it worked, and, suddenly, here is the same issue again. BTW: I have a full-upgraded testing system (yeah, I upgraded to testing hopping for new pulseaudio version which fix the issue), no pulseaudio at all, just xfce, started with startxfce. What can I do to fix this? It's extremely annoying... sometimes I just want to throw my laptop in the wall because of this. Any extra info you need, please, tell me. Thanks in advance -- EDIT: My alsamixer is like this: And here is a video with the sound behavior.

    Read the article

  • firefox, opera 'The connection was reset' on few POST method calls on Windows and Ubuntu

    - by Gopalakrishnan Subramani
    my website works well with GET method, also few POST methods. Some pages with POST method doesn't work. Some pages with POST work. For example, login page uses POST that works fine. When I post the data on webpage, firefox says "Connecting..." and finally report connection timed out error. The same behavior happens with Opera as well. However Google Chrome works fine. At the server side, I use nginx 1.2.4 with HTTPS and uwsgi for python (flask framework) app. I use geotrust certificate. The same behavior happens with Windows 7 and Ubuntu 12.04 on firefox. I tried firefox in safemode, but no luck. Set auto-detect proxy settings. no luck. Cleared all cookies. no luck Anyone help me to fix this issue? I am posting ngix config. shame on me. I use root, I know which is not advised. need to fix soon. user root; worker_processes 4; pid /var/run/nginx.pid; events { worker_connections 768; # multi_accept on; } http { ## # Basic Settings ## sendfile on; tcp_nopush on; tcp_nodelay on; keepalive_timeout 65; types_hash_max_size 2048; # server_tokens off; # server_names_hash_bucket_size 64; # server_name_in_redirect off; include /etc/nginx/mime.types; default_type application/octet-stream; ## # Logging Settings ## access_log /var/log/nginx/access.log; error_log /var/log/nginx/error.log; ## # Gzip Settings ## gzip on; gzip_disable "msie6"; # gzip_vary on; # gzip_proxied any; # gzip_comp_level 6; # gzip_buffers 16 8k; # gzip_http_version 1.1; # gzip_types text/plain text/css application/json application/x-javascript text/xml application/xml application/xml+rss text/javascript; ## # nginx-naxsi config ## # Uncomment it if you installed nginx-naxsi ## #include /etc/nginx/naxsi_core.rules; ## # nginx-passenger config ## # Uncomment it if you installed nginx-passenger ## #passenger_root /usr; #passenger_ruby /usr/bin/ruby; ## # Virtual Host Configs ## include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; ssl_session_cache shared:SSL:10m; ssl_session_timeout 10m; server { listen 80; server_name www.example.com; rewrite ^(.*) https://example.com$1 permanent; } server { listen 80; server_name example.com; rewrite ^ https://$server_name$request_uri? permanent; } server { listen 443; server_name example.com; keepalive_timeout 70; ssl on; ssl_certificate /root/cc.cert; ssl_certificate_key /root/cc.key; ssl_protocols SSLv3 TLSv1 TLSv1.1 TLSv1.2; #ssl_ciphers HIGH:!aNULL:!MD5; ssl_ciphers RC4:HIGH:!aNULL:!MD5; ssl_prefer_server_ciphers on; location / { try_files $uri @app; } location @app { include uwsgi_params; uwsgi_pass unix:/tmp/uwsgi.sock; } } } #mail { # # See sample authentication script at: # # http://wiki.nginx.org/ImapAuthenticateWithApachePhpScript # # # auth_http localhost/auth.php; # # pop3_capabilities "TOP" "USER"; # # imap_capabilities "IMAP4rev1" "UIDPLUS"; # # server { # listen localhost:110; # protocol pop3; # proxy on; # } # # server { # listen localhost:143; # protocol imap; # proxy on; # } #}

    Read the article

  • How to change color of a cell in one sheet if its value increases or decreases from another cell value in a different sheet

    - by Sean Coffey
    I am putting together a workbook with 52 sheets for the weeks in the year. In this workbook there are multiple columns for percentages on each sheet. I want to be able to change the color of each cell based on whethernit increases (green) or decreases (red) from the same cell in the previous sheet. I have the formula i.e. =IF(ISERROR(B4/D4),"0", B4/D4) to calculate my percentages but I don't know how to put the reference in for this change. Any help?

    Read the article

  • WAMP vhost issues with all vhost pointing to the first vhost statement

    - by Rick
    I am trying to setup vhosts in WAMPSERVER and I am running into an issue where all sites are pointing to the first vhosts and not delegating properly. Has anyone had this issue? Here is my setup. In windows hosts file: 127.0.0.1 siteabc.local 127.0.0.1 sitexyz.local In httpd-vhosts.conf: <VirtualHost 127.0.0.1> DocumentRoot "C:\Users\Rick\Documents\Projects\siteabc" ServerName siteabc.local ErrorLog "logs/siteabc-error.log" CustomLog "logs/siteabc-access.log" common <Directory "C:\Users\Rick\Documents\Projects\siteabc"> Options Indexes FollowSymLinks AllowOverride all Order Deny,Allow Allow from all </Directory> </VirtualHost> <VirtualHost 127.0.0.1> DocumentRoot "C:\Users\Rick\Documents\Projects\sitexyz" ServerName sitexyz.local ErrorLog "logs/sitexyz-error.log" CustomLog "logs/sitexyz-access.log" common <Directory "C:\Users\Rick\Documents\Projects\sitexyz"> Options Indexes FollowSymLinks AllowOverride all Order Deny,Allow Allow from all </Directory> </VirtualHost> <VirtualHost 127.0.0.1> DocumentRoot "C:\Users\Rick\Documents\Projects" ServerName localhost ErrorLog "logs/localhost-error.log" CustomLog "logs/localhost-access.log" common <Directory "C:\Users\Rick\Documents\Projects"> Options Indexes FollowSymLinks AllowOverride all Order Deny,Allow Allow from all </Directory> </VirtualHost> Ok so from this setup going to siteabc works...but going to sitexyz, it still goes to siteabc. Not sure what I did wrong here. Thanks for looking.

    Read the article

  • How do I bridge connections in Debian?

    - by Josh
    In windows I can select Local Area Connection and Wireless Network Connection, right click and select Bridge Connections How can I achieve the same effect in Linux? (Debian to be exact) Pretty much I want Computer B to connect to Computer A via ethernet cable. Well Computer A is connected wirelessly. Allowing Computer B to get on the internet. == UPDATE == I've enabled IP forwarding and used the following iptables command: iptables -t nat -A POSTROUTING -o wlan0 -j MASQUERADE I'm still unable to access the internet from Computer B though.

    Read the article

  • the effect of large number of files on disk space in unix filesystems

    - by user46976
    If I have a text file in Unix that contains N-many independent entries (e.g. records about employees, where each employee has a separate record), is it expected that this file will take up less space than if I split the file into N files, each containing the entry for one employee? in other words, can one save significant space on unix file systems by concatenating many files together, or is the difference negligible? thanks.

    Read the article

  • Problems in Table of Contents formatting

    - by ChrisW
    Two questions about captions in Word (they are related, hence the same post): Using Word 2010 (and its inbuilt equation editor) I've got figure captions which contain equations (well, actually, they represent chemical equations, such as nitrate, for which the correct representation is NO3- where the 3 is subscript and the - is superscript, but in the same column). However, when I generate a figure list, the equation displays as NO3- (with no subscript or superscript) - Word knows it's an equation though (the Equation Tools design ribbon/tab is displayed when I click on the NO3-). I've tried changing it from Professional to Linear and similar other obvious options, but still can't get it to display correctly. File to show this problem in action: http://dl.dropbox.com/u/101867759/EqtnTest.docx - note how the (chemical) equation for nitrate is rendered correctly in the 'caption' on Page 2, but not in the ToC on page 1. I have another caption where the whole figure is included in my list of figures. When I double click on the caption in my text, the caption is highlighted (as expected), but so is the figure (this doesn't happen with any of my other figures) so I assume that the figure has been 'linked' in some way to the text - how do I remove this link?

    Read the article

  • How to enable RDP to a Server 2008 R2 on another network? VM network

    - by Saariko
    I have a W2008 R2 installed on a different network (I am on 192.168.0.x - new server on 192.168.3.x) I had trouble ping and RDP to it. I disabled the firewall to test the connection: and that opened the ping feature but I still can not RDP to that machine. the allow remote access is enabled As per sinni80 idea - Here is the error message The networks are divided by a Fortigate 60-B router - 2ndy interface for the gateway is 192.168.3.254 (and pingable from all) any to any rule on both networks is in place. As per Joe Schmoe idea - I am able to RDP to 192.168.3.1 from 192.168.3.3 (which is on the same network) Data to add: - The servers are on a VM host, each of the servers has 2 nics one is DHCP enabled into the 192.168.0.x network 2nd is static IP in the 192.168.3.x -- Further information: The network 192.168.0.x - are on a domain network (active Directory) The network 192.168.3.x - are grouped in a workgroup What should I check more please?

    Read the article

  • Windows remote shutdown: access denied

    - by gregseth
    I have 3 "client" computers, on which the mentioned user is administrator: CPU1: Win Vista 32-bit -- User: Domain\User1 -- IP: 192.168.42.1 CPU2: Win 7 64-bit -- User: localhost\User2 -- IP: 192.168.42.2 CPU3: Win 7 64-bit -- User: Domain\User3 -- IP: 192.168.42.3 And a "target" computer (the one that I want to shutdown from the three others): TGT: Win 7 64-bit -- User: localhost\User4 -- IP: 192.168.42.21 I'm trying to shutdown TGT with the following command: shutdown /s /m \\192.168.42.21 It's working from CPU1 (meaning TGT shuts down), but from CPU2 and CPU3 I get the following message: Access denied. (5) What am I to understand? What should I do to get it working form all of my computers.

    Read the article

  • What power cord does a WD16001032 hard drive use?

    - by llcf
    I have a Western Digital 160GB My Book USB external hard drive (WD16001032), but I can't find its power cord (or, at least, figure out which one it is in my box of cords). It might be that only one power cord would fit, but I'm a bit cautious since I just tried one of the cords with a router and could smell electronics burning when I used an incorrect one. What voltage/amps are needed for this drive? I can't find specs on Western Digital's site. I'm assuming this is due to it being an older drive.

    Read the article

  • How to limit a process to a single CPU core?

    - by Jonathan
    How do you limit a single process program run in a Windows environment to run only on a single CPU on a multi-core machine? Is it the same between a windowed program and a command line program? UPDATE: Reason for doing this: benchmarking various programming languages aspects I need something that would work from the very start of the process, therefore @akseli's answer, although great for other cases, doesn't solve my case

    Read the article

  • Track kids browsing history even when they know how to clear it manually

    - by Darren Newton
    I have a colleague with two teenage boys (yes, cue cliche's about 'I have this friend see...') He's currently having issues with them browsing pr0n and wants to do a little spying on their browsing (I'm staying clear of the philosophies/ethics on this.) The kids are savvy enough to clear their browsing history when they're done. As I'm his goto for IT he has asked me if there is a way to keep a hold of the browsing history. The family uses Macs, and the kids surf with Safari. I know that browsing history is kept here ~/Library/Safari/History.plist. I figure there should be a way to write either an AppleScript or other script (Python/Ruby/Bash) that can backup this file to a different location (/opt/local/history, etc.) Since the kids know to clear their history when they're done should the file be periodically backed up with something similar to a cron job or something like Hazel? While that could work it seems like it would create a ton of little incremental backups. Or is it possible to 'watch' ~/Library/Safari/History.plist and incrementally add changes to a backup file (saving a diff so to speak) but not lose any data? Any ideas/solutions appreciated. UPDATE/EDIT: Got the word from concerned dad that the oldest uses Firefox on a different PC, so the OpenDNS solution (preferably at the router level) is the best answer so far as it would capture usage for the whole house.

    Read the article

  • The Best Free Online First Person Shooter (FPS) Games

    - by Lori Kaufman
    First Person Shooter (FPS) games are action games centered around gun and projectile weapon-based combat. As the player, you experience the action directly through the eyes of the protagonist. FPS games have become a very popular type of game online. A lot of FPS games are paid, but there are many you can play for free. Most FPS games have online versions where you play in a supported browser or download a program for your PC that allows you to connect to the game online. We have collected links and information about some of the more popular free FPS games available. All the games listed here are free to play, but there may be some limitations, and you have to register for many of them and download game clients to your computer to be able to connect to the game online. Secure Yourself by Using Two-Step Verification on These 16 Web Services How to Fix a Stuck Pixel on an LCD Monitor How to Factory Reset Your Android Phone or Tablet When It Won’t Boot

    Read the article

  • Migrating Virtual Iron guest to Oracle VM 3.x

    - by scoter
    As stated on the official site, Oracle in 2009, acquired a provider of server virtualization management software named Virtual Iron; you can find all the acquisition details at this link. Into the FAQ on the official site you can also view that, for the future, Oracle plans to fully integrate Virtual Iron technology into Oracle VM products, and any enhancements will be delivered as a part of the combined solution; this is what is going on with Oracle VM 3.x. So, customers started asking us to migrate Virtual Iron guests to Oracle VM. IMPORTANT: This procedure needs a dedicated OVM-Server with no-guests running on top; be careful while execute this procedure on production environments. In these little steps you will find how-to migrate, as fast as possible, your guests between VI ( Virtual Iron ) and Oracle VM; keep in mind that OracleVM has a built-in P2V utility ( Official Documentation )  that you can use to migrate guests between VI and Oracle VM. Concepts: VI repositories.  On VI we have the same "repository" concept as in Oracle VM; the difference between these two products is that VI use a raw-lun as repository ( instead of using ocfs2 and its capabilities, like ref-links ). The VI "raw-lun" repository, with a pure operating-system perspective, may be presented as in this picture: Infact on this "raw-lun" VI create an LVM2 volume-group. The VI "raw-lun" repository, with an hypervisor perspective, may be presented as in this picture: So, the relationships are: LVM2-Volume-Group <-> VI Repository LVM2-Logical-Volume <-> VI guest virtual-disk The first step is to present the VI repository ( raw-lun ) to your dedicated OVM-Server. Prepare dedicated OVM-Server On the OVM-Server ( OVS ) you need to discover new lun and, after that, discover volume-group and logical-volumes containted in VI repository; due to default OVS configuration you need to edit lvm2 configuration file: /etc/lvm/lvm.conf     # By default for OVS we restrict every block device:     # filter = [ "r/.*/" ] and comment the line starting with "filter" as above. Now you have to discover the raw-lun presented and, next, activate volume-group and logical-volumes: #!/bin/bash for HOST in `ls /sys/class/scsi_host`;do echo '- - -' > /sys/class/scsi_host/$HOST/scan; done CPATH=`pwd` cd /dev for DEVICE in `ls sd[a-z] sd?[a-z]`;do echo '1' > /sys/block/$DEVICE/device/rescan; done cd $CPATH cd /dev/mapper for PARTITION in `ls *[a-z] *?[a-z]`;do partprobe /dev/mapper/$PARTITION; done cd $CPATH vgchange -a yAfter that you will see a new device:[root@ovs01 ~]# cd /dev/6000F4B00000000000210135bef64994[root@ovs01 6000F4B00000000000210135bef64994]# ls -l 6000F4B0000000000061013* lrwxrwxrwx 1 root root 77 Oct 29 10:50 6000F4B00000000000610135c3a0b8cb -> /dev/mapper/6000F4B00000000000210135bef64994-6000F4B00000000000610135c3a0b8cb By your OVM-Manager create a guest server with the same definition as on VI:same core number as VI source guestsame memory as VI source guestsame number of disks as VI source guest ( you can create OVS virtual disk with a small size of 1GB because the "clone" will, eventually, extend the size of your new virtual disks )Summarizing:source-virtual-disk path ( VI ):/dev/mapper/6000F4B00000000000210135bef64994-6000F4B00000000000610135c3a0b8cbdest-virtual-disk path ( OVS ):/OVS/Repositories/0004fb00000300006cfeb81c12f12f00/VirtualDisks/0004fb000012000055e0fc4c5c8a35ee.img ** ** = to identify your virtual disk you have verify its name under the "vm.cfg" file of your new guest.Clone VI virtual-disk to OVS virtual-diskdd if=/dev/mapper/6000F4B00000000000210135bef64994-6000F4B00000000000610135c3a0b8cb of=/OVS/Repositories/0004fb00000300006cfeb81c12f12f00/VirtualDisks/0004fb000012000055e0fc4c5c8a35ee.img Clean unsupported parameters and changes on OVS.1. Restore original /etc/lvm/lvm.conf    # By default for OVS we restrict every block device:     filter = [ "r/.*/" ]    and uncomment the line starting with "filter" as above.2. Force-stop lvm2-monitor service  # service lvm2-monitor force-stop 3. Restore original /etc/lvm directories ( archive, backup and cache )  # cd /etc/lvm  # rm -fr archive backup cache; mkdir archive backup cache4. Reboot OVSRefresh OVS repository and start your guest.By OracleVM Manager refresh your repository:By OracleVM Manager start your "migrated" guest: Comments and corrections are welcome.  Simon COTER 

    Read the article

  • Is the copy/paste approach professionally viable when working with the Google Maps API?

    - by Ian Campbell
    I find that I understand much of the Javascript concepts used in the Google Maps API code, but then again there is quite a bit that is way over my head in syntax. For example, the geocoder syntax seems to be of Ajax form, though I don't understand what is happening under the hood (especially with lines like results[0].geometry.location). I am able to modify the body of if (status == google.maps.GeocoderStatus.OK) for different purposes though. So, being that I am able to take various code from the Developer's Guide and rework it to an extent for my own purposes, all the while not fully understanding what Google Maps is actually doing, does this make me a copy-paste programmer? Is this a bad practice, or is this professionally viable? I am, of course, interested in learning as much as I can, but what if time-constraints outweigh the learning process?

    Read the article

  • what languages are good selling points on resume? [closed]

    - by Thomas Galvin
    I have a good amount of experience with C# and Java at the moment but after education and whatnot I wish to be able in more than just 2 high-level, comparatively limited languages, and from what I've seen languages like C(++) or PHP are in demand at the moment. I've thought about learning the following: C. Very standard, lightweight and available on everything. However very old and mostly procedural. C++. Standard like C but I've read in some places that it encourages bad programming design and use of dodgy libraries - but similar things have been said about C too so I'll take that with a grain of salt. D. Quite new but looks promising, but will it be relevant or applicable in the future though? PHP. With the internet becoming ever more important I think this might be the one to go with, but the code itself isn't very intuitive. CoffeeScript (or plain JavaScript). With Microsoft's new idea of HTML5+JS for everything under the sun this doesn't look like a bad choice. However things do change and I wish to be primarily a software dev, not web dev. So out of the above list, or any others that you could suggest, what would you say I should begin to focus on? What is your opinion on staying with C#?

    Read the article

  • Can Anything be Done to Make Improv (a 1993 Win 3.1 App) handle larger Files?

    - by user75185
    My very favorite spradsheet is Improv, a 1993 Windows 3.1 application. It still puts Excel to shame for building spreadsheets and writing formulas. The only problem is because Improv was written when 1 Meg of RAM was state of the art, it becomes unstable when working with larger spreadsheets and often crashes and/or corrupts the data file. I am working on a project that greatly exceeds Improv's limits. Although it will ultimately require more robust databasing capability, I could save a lot of critical time if I could delay that headache and continue working in Improv for now. To that end, I moved to the only product I could find that comes close, Quantrix, which is nothing more than Improv updated to handle large spreadsheets and utilize today's technologies. The problems with Quantrix are its speed (significantly slower than Improv) and its $1000 price (which I cannot afford). I have already had 3 15 day extensions after the initial 30 day trial, so my time to use Quantrix as a bridge is at its end. Searches for Improv over the years have gotten me nowhere and, not surprisingly after reading some posts on this site, I got nothing for the money and time invested to find a programmer to write code to "fix" this problem. Improv is freely available as "abandonware" at http://vetusware.com/download/LotusImprov2.1/?id=5797 , and the best background info can be found on Wikipedia and at "Moose's Greatest Software Products of All Time - Lotus Improv" http://moosevalley.fhost.com.au/mooses_review_page_lotus_improv.html It is critically urgent for me to focus on analyzing the data asap. Working in a stable Improv would, without question, be the fastest route. To that end, I am looking for answers to the following questions and anything else that might be helpful: 1) Is it lawful to hire someone to fix Improv for my own use? If so, 2) About how much should it cost? 3) About how long should it take? 4) What skills should I be looking for &/or how should a post be worded? 5) Is there a niche site where it should it be posted? 6) What questions can I ask to quickly screen candidates? Since I am not a programmer, I need questions the answers to which leave no room to confuse me, whether intentional or not. For example, what tools or players should someone with an acceptable competency level have knowledge of?

    Read the article

  • design for interruptable operations

    - by tpaksu
    I couldn't find a better topic but here it is; 1) When user clicks a button, code starts t work, 2) When another button is clicked, it would stop doing whatever it does and start to run the second button's code, 3) Or with not user interaction, an electrical power down detected from a connected device, so our software would cancel the current event and start doing the power down procedure. How is this design mostly applied to code? I mean "stop what you are doing" part? If you would say events, event handlers etc. how do you bind a condition to the event? and how do you tell the program without using laddered if's to end it's process? method1(); if (powerdown) return; method2(); if (powerdown) return; etc.

    Read the article

  • Authenticate with Django 1.5

    - by gorjuce
    I'm currently testing django 1.5 and a custom User model, but I've some problems. I've created a User class in my account app, which looks like: class User(AbstractBaseUser): email = models.EmailField() activation_key = models.CharField(max_length=255) is_active = models.BooleanField(default=False) is_admin = models.BooleanField(default=False) USERNAME_FIELD = 'email' I can correctly register a user, who is stored in my account_user table. Now, how can I log in? I've tried with: def login(request): form = AuthenticationForm() if request.method == 'POST': form = AuthenticationForm(request.POST) email = request.POST['username'] password = request.POST['password'] user = authenticate(username=email, password=password) if user is not None: if user.is_active: login(user) else: message = 'disabled account, check validation email' return render( request, 'account-login-failed.html', {'message': message} ) return render(request, 'account-login.html', {'form': form}) I can correctly register a new User My forms.py which contains my register form class RegisterForm(forms.ModelForm): """ a form to create user""" password = forms.CharField( label="Password", widget=forms.PasswordInput() ) password_confirm = forms.CharField( label="Password Repeat", widget=forms.PasswordInput() ) class Meta: model = User exclude = ('last_login', 'activation_key') def clean_password_confirm(self): password = self.cleaned_data.get("password") password_confirm = self.cleaned_data.get("password_confirm") if password and password_confirm and password != password_confirm: raise forms.ValidationError("Password don't math") return password_confirm def clean_email(self): if User.objects.filter(email__iexact=self.cleaned_data.get("email")): raise forms.ValidationError("email already exists") return self.cleaned_data['email'] def save(self): user = super(RegisterForm, self).save(commit=False) user.password = self.cleaned_data['password'] user.activation_key = generate_sha1(user.email) user.save() return user My question is: Why does authenticate give me None? I know I'm trying to authenticate() with an email as username but is that not one of the reasons to use a custom User model?

    Read the article

  • Desktop application, dependency injection

    - by liori
    I am thinking of applying a real dependency injection library to my toy C#/GTK# desktop application. I chose NInject, but I think this is irrelevant to my question. There is a database object, a main window and several utility window classes. It's clear that I can inject the database into every window object, so here DI is useful. But does it make sense to inject utility window classes into other window classes? Example: I have classes such as: class MainWindow {…} class AddItemWindow {…} class AddAttachmentWindow {…} class BrowseItemsWindow {…} class QueryBuilderWindow {…} class QueryBrowserWindow {…} class PreferencesWindow {…} … Each of the utility classes can be opened from MainWindow. Some utility windows can also be opened from other utility windows. Generally, there might be a really complex graph of who can open whom. So each of those classes might need quite a lot of other window classes injected. I'm worried that such usage will go against the suggestion not to inject too many classes at once and become a code smell. Should I use some kind of a service locator object here?

    Read the article

  • Problem with creating a deterministic finite automata (DFA) - Mercury

    - by Jabba The hut
    I would like to have a deterministic finite automata (DFA) simulated in Mercury. But I’m s(t)uck at several places. Formally, a DFA is described with the following characteristics: a setOfStates S, an inputAlphabet E <-- summation symbol, a transitionFunction : S × E -- S, a startState s € S, a setOfAcceptableFinalStates F =C S. A DFA will always starts in the start state. Then the DFA will read all the characters on the input, one by one. Based on the current input character and the current state, there will be made to a new state. These transitions are defined in the transitions function. when the DFA is in one of his acceptable final states, after reading the last character, then will the DFA accept the input, If not, then the input will be is rejected. The figure shows a DFA the accepting strings where the amount of zeros, is a plurality of three. Condition 1 is the initial state, and also the only acceptable state. for each input character is the corresponding arc followed to the next state. Link to Figure What must be done A type “mystate” which represents a state. Each state has a number which is used for identification. A type “transition” that represents a possible transition between states. Each transition has a source_state, an input_character, and a final_state. A type “statemachine” that represents the entire DFA. In the solution, the DFA must have the following properties: The set of all states, the input alphabet, a transition function, represented as a set of possible transitions, a set of accepting final states, a current state of the DFA A predicate “init_machine (state machine :: out)” which unifies his arguments with the DFA, as shown as in the Figure. The current state for the DFA is set to his initial state, namely, 1. The input alphabet of the DFA is composed of the characters '0'and '1'. A user can enter a text, which will be controlled by the DFA. the program will continues until the user types Ctrl-D and simulates an EOF. If the user use characters that are not allowed into the input alphabet of the DFA, then there will be an error message end the program will close. (pred require) Example Enter a sentence: 0110 String is not ok! Enter a sentence: 011101 String is not ok! Enter a sentence: 110100 String is ok! Enter a sentence: 000110010 String is ok! Enter a sentence: 011102 Uncaught exception Mercury: Software Error: Character does not belong to the input alphabet! the thing wat I have. :- module dfa. :- interface. :- import_module io. :- pred main(io.state::di, io.state::uo) is det. :- implementation. :- import_module int,string,list,bool. 1 :- type mystate ---> state(int). 2 :- type transition ---> trans(source_state::mystate, input_character::bool, final_state::mystate). 3 (error, finale_state and current_state and input_character) :- type statemachine ---> dfa(list(mystate),list(input_character),list(transition),list(final_state),current_state(mystate)) 4 missing a lot :- pred init_machine(statemachine :: out) is det. %init_machine(statemachine(L_Mystate,0,L_transition,L_final_state,1)) :- <-probably fault 5 not perfect main(!IO) :- io.write_string("\nEnter a sentence: ", !IO), io.read_line_as_string(Input, !IO), ( Invoer = ok(StringVar), S1 = string.strip(StringVar), (if S1 = "mustbeabool" then io.write_string("Sentenceis Ok! ", !IO) else io.write_string("Sentence is not Ok!.", !IO)), main(!IO) ; Invoer = eof ; Invoer = error(ErrorCode), io.format("%s\n", [s(io.error_message(ErrorCode))], !IO) ). Hope you can help me kind regards

    Read the article

  • Ubuntu user expectations from 12.04 and future releases

    - by Rick Green - Turbo
    How much further ahead is 12.10 vs 12.04 in respect to kernel updates and applications? Example: Gimp's newest release is 2.8 which runs equally as well in both 12.04 and 12.10 and probably will in 13.04. What restricts 12.04 from having "the same" look, feel, applications and kernel as 12.10 or the upcoming 13.04? I know that it's more than a name change.....it's whats under the hood that counts. Incrementally upgrading, I feel is safer than radical changes from release to release. Trying to keep a stable desktop and current user experience, how far can I take updating applications before I absolutely have to make a distro upgrade from 12.04LTS

    Read the article

  • Is there a way to change the root password while still logged in? I did something bad by accdient -_-

    - by Robert
    So I was trying to add my printer, and I wasn't able to make any changes due to the fact that cups was not accepting my root password. I was Googling some changes and trying to fix the problem when one of the commands CHANGED MY SUDO PASSWORD! Can someone please tell me which one of these is the culprit? I was trying to these commands: cat /etc/group | grep root cat /etc/group | grep myUserName usermod -a -G lpadmin myUserName sudo usermod -a -G lpadmin myUserName sudo gedit /etc/cups/cupsd.conf lppasswd -a myUserName lppasswd -a root sudo lppasswd -a myUserName I think it was this one, but I know which passwords I put in! There was nothing which I typed in besides my strong password or my easy temporary password. Unless I made a typo... please no. restart cups sudo password root This is so not cool, I was just trying to add a printer :'( Please help my stupidity!

    Read the article

  • 403 Forbidden for /home/my-username/Dropbox/Hemsidor as directory root

    - by Erik Edgren
    I'm trying setup Apache to point the directory root to /home/my-username/Dropbox/Hemsidor but when I go to localhost I got 403 Forbidden. I don't have any .htaccess file in the home directory (Hemsidor) so I don't know what the problem is. I have tested to add Options +FollowSymLinks -SymLinksIfOwnerMatch in my httpd.conf file and then restarted Apache but with no luck. What's wrong? Thanks in advance.

    Read the article

< Previous Page | 211 212 213 214 215 216 217 218 219 220 221 222  | Next Page >