Monthly Archives

Articles indexed in June 2012

Page 221/464 | < Previous Page | 217 218 219 220 221 222 223 224 225 226 227 228  | Next Page >

  • How to stop calling the Activity again when device orientation is changed??

    - by user1460323
    My app uses Barcode Scanner. I want to launch the scanner when I open the app so I have it in the onCreate method. The problem is that if I have it like that, when I turn the device it calls again onCreate and calls another scanner. Also I have the first activity that calls the scanner. it has a menu so if he user presses back, it goes to that menu. If I turn the screen on that menu, it goes to barcode scanner again. To solve it I have a flag that indicates if it is the first time I call the scanner, if it's not I don't call it again. Now the problem is that if I go out of the app and go in again it doesn't go to the scanner, it goes to the menu, becasuse is not the first time I call it. Any ideas?? Is there a way to change the flag when I go out of my main activity or any other solution?? My code. private static boolean first = true; public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.main); integrator = new IntentIntegrator(this); if (first) { first = false; integrator.initiateScan(); } }

    Read the article

  • How to set parameters of CGContextAddArcToPoint method using a slider

    - by Manish Sahni
    am making an app in which i have to control a smile of a face like graphics. For example if i slide the slider down(to a value less than middle) it should give the arc a sad face(like :-( ) effect and if i slide the slider up the arc should give the effect of smile(like :-) ).initially lips are like :-| . I need to control the lips which is an arc using a slider? smileSliderViewController.h #import <UIKit/UIKit.h> @interface smileSliderViewController : UIViewController { IBOutlet UISlider *slider; } -(IBAction)valueChange:(id)sender; @end smileSliderViewController.m #import "smileSliderViewController.h" //#import "smile.h" @implementation smileSliderViewController -(IBAction)valueChange:(id)sender { int value = (int)(slider.value); if(value>0 && value<25) { //value--; CGContextRef context = UIGraphicsGetCurrentContext(); CGContextSetLineWidth(context, 2.0); CGColorSpaceRef colorspace = CGColorSpaceCreateDeviceRGB(); CGFloat components[] = {0.0,0.0,1.0,1.0}; CGColorRef color = CGColorCreate(colorspace, components); CGContextSetStrokeColorWithColor(context, color); CGContextMoveToPoint(context, 120,180); CGContextAddArcToPoint(context, 190 , 170, 270, 200, 0 ); CGContextStrokePath(context); } } smile.h #import <UIKit/UIKit.h> #import "smile.m" @interface smile : UIView { IBOutlet UISlider *slider; } @end smile.m #import "smile.h" #import "smileSliderViewController.h" @implementation smile - (id)initWithFrame:(CGRect)frame { if (self = [super initWithFrame:frame]) { // Initialization code } return self; } - (void)drawRect:(CGRect)rect { CGContextRef context = UIGraphicsGetCurrentContext(); CGContextSetLineWidth(context, 2.0); //CGContextSetStrokeColor(context, [UIColor redColor].CGColor); CGColorSpaceRef colorspace = CGColorSpaceCreateDeviceRGB(); CGFloat components[] = {0.0,0.0,1.0,1.0}; CGColorRef color = CGColorCreate(colorspace, components); CGContextSetStrokeColorWithColor(context, color); CGRect rectangle = CGRectMake(60, 20, 200,200); CGContextAddEllipseInRect(context, rectangle); CGContextStrokePath(context); /*CGRect rectangle1 = CGRectMake(130,170,50,10); CGContextAddRect(context,rectangle1); CGContextStrokePath(context);*/ /*CGContextMoveToPoint(context,100,200); CGContextAddArcToPoint(context,120,150,400,150,70 ); CGContextStrokePath(context);*/ /*CGContextMoveToPoint(context, 100,100); CGContextAddArcToPoint(context, -100,200, -400,200, 80); CGContextStrokePath(context);*/ CGContextSetStrokeColorWithColor(context,color); CGRect rectangle2 = CGRectMake(80, 90, 50, 8); CGContextAddEllipseInRect(context, rectangle2); CGContextStrokePath(context); CGContextSetStrokeColorWithColor(context,color); CGRect rectangle3 = CGRectMake(180, 90, 50, 8); CGContextAddEllipseInRect(context, rectangle3); CGContextStrokePath(context); CGContextSetStrokeColorWithColor(context,color); CGContextMoveToPoint(context, 155,120); CGContextAddLineToPoint(context, 155,160); CGContextStrokePath(context); /*CGContextSetStrokeColorWithColor(context, color); CGRect rectangle4 = CGRectMake(130, 180, 50,8); CGContextAddEllipseInRect(context, rectangle4); CGContextStrokePath(context);*/ /*CGContextSetStrokeColorWithColor(context,color); CGContextMoveToPoint(context, 120,180); CGContextAddLineToPoint(context, 190,180); CGContextStrokePath(context);*/ int value = (int)(slider.value); if(value == 25) { CGContextMoveToPoint(context, 120,180); CGContextAddArcToPoint(context, 190 , 180, 250 , 180, 0 ); CGContextStrokePath(context); } }

    Read the article

  • is it possible to use a python scrapper in a website?

    - by Tom
    I want to scrap a website and use that content in a website of my own. I am just wondering if that can be done with python 2.7, and if so how? If not, do I have to use JavaScript to scrap it? And do you have a good place to learn how to do that or good libraries for it. For those of you wondering, the website I am scrapping is legal, and they allow for this to be done. I have searched all over but apparently nobody tries to implement these scrappers that they write. I can write a web scrapper in python just fine. Say my scrapper scraps a name from a wikipedia page (John Doe for example), how can I use that name that I get in my website? Another update, I have found pjsrape and PhantomJS. I have only found one stack overflow post and the github examples with aren't very intuitive. If anybody has any experience or better ways to do it I would very much appreciate it

    Read the article

  • WP7 - selling extensions

    - by coder89
    I'm trying to create some application for Windows Phone = 7.1 During plannin my work and specyfiong technical requirements I've come across one problem. I wan't to have free application with basic functionality. And then it should be extendable with some non-free extensions (dlls?, databases?, SaaS?) Is it possible at the moment to use some MS api/app/etc. to be able to publish such extensions and sell them? What is the best way to do this if there is more than one solution? Thank you for any help.

    Read the article

  • Sublime Text 2 Keyboard shortcut to open file in Chrome/firefox in windows

    - by samdroid
    I followed the instruction for windows 7 to setup chrome. No luck! { "cmd":["C:\Program Files (x86)\Google\Chrome\Application", "$C:\Users\gmu\Desktop\June_15_2012"] } after entering the file location/path under what format should I have to save. I am a noobie. sorry to ask this question. Anything helps! If I press f7 getting the following message Error trying to parse build system: Invalid escape in C:\Users\gmu\AppData\Roaming\Sublime Text2\Packages\User\Chrome.sublime-build:2:9 Thanks

    Read the article

  • Filtering string in Python

    - by Ecce_Homo
    I am making algorithm for checking the string (e-mail) - like "E-mail addres is valid" but their are rules. First part of e-mail has to be string that has 1-8 characters (can contain alphabet, numbers, underscore [ _ ]...all the parts that e-mail contains) and after @ the second part of e-mail has to have string that has 1-12 characters (also containing all legal expressions) and it has to end with top level domain .com EDIT email = raw_input ("Enter the e-mail address:") length = len (email) if length > 20 print "Address is too long" elif lenght < 5: print "Address is too short" if not email.endswith (".com"): print "Address doesn't contain correct domain ending" first_part = len (splitting[0]) second_part = len(splitting[1]) account = splitting[0] domain = splitting[1] for c in account: if c not in "abcdefghijklmopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789_.": print "Invalid char", "->", c,"<-", "in account name of e-mail" for c in domain: if c not in "abcdefghijklmopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789_.": print "Invalid char", "->", c,"<-", "in domain of e-mail" if first_part == 0: print "You need at least 1 character before the @" elif first_part> 8: print "The first part is too long" if second_part == 4: print "You need at least 1 character after the @" elif second_part> 16: print "The second part is too long" else: # if everything is fine return this print "E-mail addres is valid" EDIT: After reproting what is wrong with our input, now I need to make Python recognize valid address and return ("E-mail adress is valid") This is the best i can do with my knowledge....and we cant use regular expressions, teacher said we are going to learn them later.

    Read the article

  • CherryPy always returning HTTP 200 [closed]

    - by DarkArctic
    I'm having a bit of a problem when browsing to a non-existent resource. I get a response code of 200 instead of 404. I'm using the MethodDispatcher and I have a class that overloads the __getattr__ method to instantiate a resource if a child exists or to return AttributeError if one doesn't. My class is always returning the AttributeError correctly, but the data I actually get is always from the last good resource. Here's a simplified (except for __getattr__) version of my class: class BaseResource(object): exposed = True def __init__(self, name): self.children = [] # Pretend this has child resources def __getattr__(self, name): if name in self._children: uuid, application, obj_type, server = self._children[name] try: resource = getattr(app[application], obj_type) except AttributeError as e: raise cherrypy.HTTPError(500, e) return resource(uuid) else: raise AttributeError('Child with name \'{}\' could not be found.'.format(name)) def GET(self): cherrypy.log.error('*** {} not found, raising AttributeError'.format(name)) return 'GET request for {}'.format(self._name) So fetching I get the following when I browse to the following resources: http://localhost:8000/users - This resource exists, so it returns it correctly. http://localhost:8000/users/fake - This returns the "users" resource giving an HTTP 200. http://localhost:8000/users/fake/reallyfake - This returns the "users" resource again. So my question is, where can I start looking to find out why my code isn't returning a 404 for a non-existent resource. I'm sure I've done something wrong, but I'm not sure what. Whatever I did wrong I've undone and I'm now getting a 404 returned correctly. I'm sorry I can't give any detail on what the issue was, but I'm honestly not sure what I did.

    Read the article

  • Fade unfocused GNU Emacs frame (X window)

    - by Mischa Arefiev
    Is it possible to make GNU Emacs 24 dim unfocused windows a bit? For example, I can set my rxvt-unicode clients to become darker when their windows don't have focus with this string in ~/.Xdefaults: URxvt*fading: 50 It greatly reduces discomfort when you have a lot of terminal windows on 2+ monitors. I would like a similar feature in Emacs, but couldn't google up anything. Here is how it looks like with urxvt (png, 1.43 MB)

    Read the article

  • How to setup apache multi-site with multi-domain on ec2

    - by Esh
    Say I have two document roots domain1/ and domain2/ I know how to access those two roots from my own computer if they are hosted on the same computer. My question is that if I want to do the same thing on my ec2 server, how should I configure my elastic ips to those two roots? I know by default the elastic ip will only associate to the root with the name localhost(127.0.0.1). Anyone could give me a detailed answer? An example would help, thanks!

    Read the article

  • vsftpd: ECONNREFUSED with "allow_writeable_chroot=YES"

    - by heinob
    When setting up vsftpd I am trapped. When I leave the ftpuser's home directory without write permission I can login and all is fine despite the fact, that I cannot write (of course). When I add write permission I get something like cannot change to directory with write permissions if user is chrooted Then I added allow_writeable_chroot=YES to vsftpd.conf. But now I get ECONNREFUSED - Connection refused by server I am lost. What am I doing wrong?

    Read the article

  • How to run a DHCP service on Windows 7 Home

    - by Joshua Lim
    I'm trying to setup a DHCP server on Windows 7 Home, tried using a couple of freeware which I found on the Internet but none seemed to work. What I did: On the Windows 7 machine which I install the DHCP Server with the range 192.168.1.12-192.168.1.256. I set the Gigabit Ethernet adapter to a static IP address of 192.168.1.11 and subnet mask of 255.255.255.0. When I did an IP config, it showed. Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom NetLink (TM) Gigabit Ethernet Physical Address. . . . . . . . . : 8C-73-6E-75-A7-56 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::196d:b6bb:8f93:2555%12(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.1.11(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1 NetBIOS over Tcpip. . . . . . . . : Enabled I connected another Window 7 machine to the "DHCP server" using a cross cable and set network adapter on that machine to automatically detect IP address. The client fails to acquire the correct IP address from the DHCP server and showed the autoconfigured IPv4 address instead. Here's the information returned by config /all on the client machine. Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Atheros AR8152/8158 PCI-E Fast Ethernet Controller (NDIS 6.20) Physical Address. . . . . . . . . : 54-04-A6-40-96-4B DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::4885:4082:5572:5a85%12(Preferred) Autoconfiguration IPv4 Address. . : 169.254.90.133(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.0.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 341050534 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-17-54-78-12-00-08-CA-46-4C-5A DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1 NetBIOS over Tcpip. . . . . . . . : Enabled DHCP client are running on both machines. I've tried many times but failed. Googling also returned no useful information for my scenario. Have I missed out any step? Thanks.

    Read the article

  • Invalid domains in DNS don't work on mac/*nix like systems

    - by David Mulder
    At work we use domains like abc-01, which work fine on windows. Whilst developing mobile applications we already saw that this doesn't work on both iOS and android which we fixed for a few specific domains (by setting the dns up that abc-01.def.local also works in those) and was assumed to be caused by it being an invalid domain. Now however it's necessary to connect through VPN from a mac and changing all relevant domains is not an option at the moment (far too many of them and would require changing the settings of far too many applications), so I was hoping whether somebody knows a trick or setting to get this to work on mac (or even linux in general).

    Read the article

  • Tracking Administrator account for Domain Controller

    - by Param
    Have you ever created a Task Scheduler Event Notification via Email regarding password change or wrong attempt for administrator? Ok Let me Elaborate more.... As we know, that Administrator / domain admin / Enterprise admin is very important. So i want to keep a track of the following event - A) I must received a Email, whenever password is change of the administrator account - with date, time and ip address B) I must received a Email notification, whenever Administrator logs in Successfully or Unsuccessfully with date, time and ip address I am thinking to do the above task with Task Scheduler Event Notification, have you ever done with the same method? Thanks & Regards, Param

    Read the article

  • How to configure network on Windows Server 2008

    - by Gokhan Ozturk
    I have a IBM x3400 Server Machine with Windows Server 2008 R2 installed on it. But, since I am not expert on networking I have some problems. These roles installed on my server: Active Directory DNS File Sharing Hyper-V ISS VPN There is two network card on them. I configured them like this: Local Connection 1: 192.168.30.3 255.255.255.0 192.168.30.2 127.0.0.1 Local Connection 2: 192.168.30.101 255.255.255.0 192.168.30.6 127.0.0.1 My problem is, when I use this Ip gateways, It is sharing internet to all computers. This is not I want. I want to use Local Connection 1 for internal network. I am giving all computers gateway and DNS IP as 192.168.30.3 The Local Connection 2 is for Hyper-V and VPN connections. 192.168.30.2 and 192.168.30.6 are my modem's gateways. I am using 192.168.30.6 external IP for VPN connections. There is two 24 port switches. There is a connection between them and this two ethernet card connected directly to them. And modems are connected to switches as well (Morems are not near the server. They are somewhere in the building). I disabled network Bridge and removed all ethernet cards from it. With this configuration, all computers can ping my server's IP (192.168.30.3) but on server I cannot ping any clients (Request timeout). What is the best way to configure my network? Thank you. Redgards

    Read the article

  • ddclient to update namecheap subdomain?

    - by LF4
    I have a subdomain that I want to update with ddclient. I configured the ddclient to get the IP from dyndns but it's not updating the subdomain on namecheap. They said to use yourdomain.com as the login instead of my actual domain. Has anyone been able to get namecheap DNS updated with ddclient? I'm running CentOS 6.2 with ddclient 3.7.3. When I run ddclient I get the following. CONNECT: checkip.dyndns.org CONNECTED: using HTTP SENDING: GET / HTTP/1.0 SENDING: Host: checkip.dyndns.org SENDING: User-Agent: ddclient/3.7.3 SENDING: Connection: close SENDING: RECEIVE: HTTP/1.1 200 OK RECEIVE: Content-Type: text/html RECEIVE: Server: DynDNS-CheckIP/1.0 RECEIVE: Connection: close RECEIVE: Cache-Control: no-cache RECEIVE: Pragma: no-cache RECEIVE: Content-Length: 106 RECEIVE: RECEIVE: <html><head><title>Current IP Check</title></head><body>Current IP Address: IPADD</body></html> Use of uninitialized value in string ne at /usr/sbin/ddclient line 1998. WARNING: skipping update of lf4bot from <nothing> to IPADD WARNING: last updated <never> but last attempt on Fri Jun 15 22:46:21 2012 failed. WARNING: Wait at least 5 minutes between update attempts. ddclient.conf File daemon=300 # check every 300 seconds syslog=yes # log update msgs to syslog mail=root # mail all msgs to root mail-failure=root # mail failed update msgs to root pid=/var/run/ddclient.pid # record PID in file. ssl=yes # use ssl-support. Works with use=web, web=checkip.dyndns.org/, web-skip='IP Address' # found after IP Address protocol=namecheap \ server=dynamicdns.park-your-domain.com \ login=yourdomain.com \ password=PASSWORD \ lf4bot

    Read the article

  • Cake Php After Php GD library installation comes error as appending 'index.php' in urls

    - by Jusnit
    I am using using Cake PHP with nginx server, inorder to enable captcha support , I installed the PHP GD library to server After the installation , All the urls in cake php is appended with 'index.php' Like www.mydomain.com/index.php instead of www.mydomain.com There cake php HtmlHelper link and image function, it all appending url "/index.php/img/flower.jpg" instead "/img/flower.jpg". Please help to solve this problem..

    Read the article

  • Apache Detects files as directories

    - by Legit
    I have a file 'result.txt' in my documentroot, now when I access: http://localhost/result/first It's accessing this instead: http://localhost/result.txt/first What could have I incorrectly misconfigured in my apache config? EDIT: My rewrite rules are as follow: <IfModule mod_rewrite.c> Options +FollowSymLinks RewriteEngine On </IfModule> <IfModule mod_rewrite.c> RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^(.*)$ index.php/$1 [L] </IfModule>

    Read the article

  • Cannot Install Phusion Passenger 3.0.13 with Nginx 1.2.1

    - by LightBe Corp
    I installed gem Passenger which installed 3.0.13. Then I executed passenger-install-nginx-module which is what the Nginx instructions on http://www.modrails.com said to do. It installs the latest stable version which is 1.2.1 according to the Nginx official wiki page. I said to install Nginx to /usr/local/nginx (which is the default if you go to the nginx wiki website). I get the following errors: Undefined symbols for architecture x86_64: "_pcre_free_study", referenced from: _ngx_pcre_free_studies in ngx_regex.o ld: symbol(s) not found for architecture x86_64 collect2: ld returned 1 exit status make[1]: *** [objs/nginx] Error 1 make: *** [build] Error 2 -------------------------------------------- It looks like something went wrong Please read our Users guide for troubleshooting tips: /Users/server1/.rvm/gems/[email protected]/gems/passenger-3.0.13/doc/Users guide Nginx.html If that doesn't help, please use our support facilities at: http://www.modrails.com/ We'll do our best to help you. I have done searches for several hours trying to find a resolution. I tried the Google Group for Phusion Passenger but did not find anything. I do not know if there is a mismatch in version numbers or not. The documentation says nothing about this error.

    Read the article

  • solutions for a webserver dedicated to manage permissions/ACL and (reverse) proxying API servers?

    - by giohappy
    I'm considering various layouts to expose various HTTP API services (running on their own differents servers) through a frontend server dedicated to manage permissions on behalf of the API services. I've considered various options, from the classical ones like Nginx, Apache, etc. to HAProxy, passing by the various Python webserver solutions like Tornado, Twisted (which gives me the opportunity to implement my own ACL system easily). The foundamental feature is high performance and scalability, and the ability to manage fine grained ACL rules (similar to the HAProxy ACL system) I would like to know what is a suggested approach to setup what I need, and if (opne source) ready-to-use solutions are already available dedicated to this.

    Read the article

  • GPG - why am I encrypting with subkey instead of primary key?

    - by khedron
    When encrypting a file to send to a collaborator, I see this message: gpg: using subkey XXXX instead of primary key YYYY Why would that be? I've noticed that when they send me an encrypted file, it also appears to be encrypted towards my subkey instead of my primary key. For me, this doesn't appear to be a problem; gpg (1.4.x, macosx) just handles it & moves on. But for them, with their automated tool setup, this seems to be an issue, and they've requested that I be sure to use their primary key. I've tried to do some reading, and I have the Michael Lucas's "GPG & PGP" book on order, but I'm not seeing why there's this distinction. I have read that the key used for signing and the key used for encryption would be different, but I assumed that was about public vs private keys at first. In case it was a trust/validation issue, I went through the process of comparing fingerprints and verifying, yes, I trust this key. While I was doing that, I noticed the primary & subkeys had different "usage" notes: primary: usage: SCA subkey: usage: E "E" seems likely to mean "Encryption". But, I haven't been able to find any documentation on this. Moreover, my collaborator has been using these tools & techniques for some years now, so why would this only be a problem for me?

    Read the article

  • Calling LoadLibraryEx on ISAPI filter failed (v4.0.30319)

    - by rob
    I installed .Net 1.1 on a Windows Server 2008 (which already had .NET 4 installed). Afterwards, I started getting the following error: HTTP Error 500.0 - Internal Server Error Calling LoadLibraryEx on ISAPI filter "C:\Windows\Microsoft.NET\Framework\v4.0.30319\\aspnet_filter.dll" failed I have tried running aspnet_regiis without success. I have also tried the suggestions by Rick Strahl but to no avail. I have also removed .NET 4.0.30319 using the cleanup tool. When I reinstalled it, The error was still there. I have already removed 1.1 but still i get that error. Please help.

    Read the article

  • NGINX Remove index.php /index.php/something/more/ to /something/more

    - by Gaston
    I'm trying to clean urls in NGINX using framework DooPHP. This = - http://example.com/index.php/something/more/ To This = - http://example.com/something/more/ I want to remove (clean url) the "index.php" from the url if someone try to enter in the first form. Like a permanent redirect. How to do this config on NGINX? Thanks. [Update: Actual nginx config] server { listen 80; server_name vip.example.com; rewrite ^/(.*) https://vip.example.com/$1 permanent; } server { listen 443; server_name vip.example.com; error_page 404 /vip.example.com/404.html; error_page 403 /vip.example.com/403.html; error_page 401 /vip.example.com/401.html; location /vip.example.com { root /sites/errors; } ssl on; ssl_certificate /etc/nginx/config/server.csr; ssl_certificate_key /etc/nginx/config/server.sky; if (!-e $request_filename){ rewrite /.* /index.php; } location / { auth_basic "example Team Access"; auth_basic_user_file config/htpasswd; root /sites/vip.example.com; index index.php; } location ~ \.php$ { fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /sites/vip.example.com$fastcgi_script_name; include fastcgi_params; fastcgi_param PATH_INFO $fastcgi_script_name; } }

    Read the article

  • Globe SSL with NGINX SSL certificate problem, please help

    - by PartySoft
    I have a big problem with installing a certificat for nginx (same happends with apache though) I have 3 files __domain_com.crt __domain_com.ca-bundle and ssl.key. I tried to append cat __domain_com.crt __leechpack_com.ca-bundle bundle.crt but if I do it like this i get an error: [emerg]: SSL_CTX_use_certificate_chain_file("/etc/nginx/__leechpack_com.crt") failed (SSL: error:0906D066:PEM routines:PEM_read_bio:bad end line error:140DC009:SSL routines:SSL_CTX_use_certificate_chain_file:PEM lib) And that's because the delimiters of the certificates arren't separated. ZqTjb+WBJQ== -----END CERTIFICATE----------BEGIN CERTIFICATE----- MIIE6DCCA9CgAwIBAgIQdIYhlpUQySkmKUvMi/gpLDANBgkqhkiG9w0BAQUFADBv If i separate them with an enter between certificated it will at least start but i will get the same warning from Firefox: This Connection is Untrusted You have asked Firefox to connect securely to domain.com, but we can't confirm that your connection is secure. The concatenate solution it is given by Globe SSL and the NGINX site but it doesn't work. I think the bundle is ignored though. http://customer.globessl.com/knowledgebase/55/Certificate-Installation--Nginx.html http://nginx.org/en/docs/http/configuring_https_servers.html#chains%20http://wiki.nginx.org/NginxHttpSslModule if i do openssl s_client -connect down.leechpack.com:443 CONNECTED(00000003) depth=0 /OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com verify error:num=20:unable to get local issuer certificate verify return:1 depth=0 /OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com verify error:num=27:certificate not trusted verify return:1 depth=0 /OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com verify error:num=21:unable to verify the first certificate verify return:1 --- Certificate chain 0 s:/OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com i:/C=RO/O=GLOBE HOSTING CERTIFICATION AUTHORITY/CN=GLOBE SSL Domain Validated CA 1 s:/C=US/O=Globe Hosting, Inc./OU=GlobeSSL DV Certification Authority/CN=GlobeSSL CA i:/C=SE/O=AddTrust AB/OU=AddTrust External TTP Network/CN=AddTrust External CA Root --- Server certificate -----BEGIN CERTIFICATE----- MIIFQzCCBCugAwIBAgIQRnpCmtwX7z7GTla0QktE6DANBgkqhkiG9w0BAQUFADBl MQswCQYDVQQGEwJSTzEuMCwGA1UEChMlR0xPQkUgSE9TVElORyBDRVJUSUZJQ0FU SU9OIEFVVEhPUklUWTEmMCQGA1UEAxMdR0xPQkUgU1NMIERvbWFpbiBWYWxpZGF0 ZWQgQ0EwHhcNMTAwMjExMDAwMDAwWhcNMTEwMjExMjM1OTU5WjCBjTEhMB8GA1UE CxMYRG9tYWluIENvbnRyb2wgVmFsaWRhdGVkMSgwJgYDVQQLEx9Qcm92aWRlZCBi eSBHbG9iZSBIb3N0aW5nLCBJbmMuMSQwIgYDVQQLExtHbG9iZSBTdGFuZGFyZCBX aWxkY2FyZCBTU0wxGDAWBgNVBAMUDyoubGVlY2hwYWNrLmNvbTCCASIwDQYJKoZI hvcNAQEBBQADggEPADCCAQoCggEBAKX7jECMlYEtcvqVWQVUpXNxO/VaHELghqy/ Ml8dOfOXG29ZMZsKUMqS0jXEwd+Bdpm31lBxOALkj8o79hX0tspLMjgtCnreaker 49y62BcjfguXRFAaiseXTNbMer5lDWiHlf1E7uCoTTiczGqBNfl6qSJlpe4rYBtq XxBAiygaNba6Owghuh19+Uj8EICb2pxbJNFfNzU1D9InFdZSVqKHYBem4Cdrtxua W4+YONsfLnnfkRQ6LOLeYExHziTQhSavSv9XaCl9Zqzm5/eWbQqLGRpSJoEPY/0T GqnmeMIq5M35SWZgOVV10j3pOCS8o0zpp7hMJd2R/HwVaPCLjukCAwEAAaOCAcQw ggHAMB8GA1UdIwQYMBaAFB9UlnKtPUDnlln3STFTCWb5DWtyMB0GA1UdDgQWBBT0 8rPIMr7JDa2Xs5he5VXAvMWArjAOBgNVHQ8BAf8EBAMCBaAwDAYDVR0TAQH/BAIw ADAdBgNVHSUEFjAUBggrBgEFBQcDAQYIKwYBBQUHAwIwVQYDVR0gBE4wTDBKBgsr BgEEAbIxAQICGzA7MDkGCCsGAQUFBwIBFi1odHRwOi8vd3d3Lmdsb2Jlc3NsLmNv bS9kb2NzL0dsb2JlU1NMX0NQUy5wZGYwRgYDVR0fBD8wPTA7oDmgN4Y1aHR0cDov L2NybC5nbG9iZXNzbC5jb20vR0xPQkVTU0xEb21haW5WYWxpZGF0ZWRDQS5jcmww dwYIKwYBBQUHAQEEazBpMEEGCCsGAQUFBzAChjVodHRwOi8vY3J0Lmdsb2Jlc3Ns LmNvbS9HTE9CRVNTTERvbWFpblZhbGlkYXRlZENBLmNydDAkBggrBgEFBQcwAYYY aHR0cDovL29jc3AuZ2xvYmVzc2wuY29tMCkGA1UdEQQiMCCCDyoubGVlY2hwYWNr LmNvbYINbGVlY2hwYWNrLmNvbTANBgkqhkiG9w0BAQUFAAOCAQEAB2Y7vQsq065K s+/n6nJ8ZjOKbRSPEiSuFO+P7ovlfq9OLaWRHUtJX0sLntnWY1T9hVPvS5xz/Ffl w9B8g/EVvvfMyOw/5vIyvHq722fAAC1lWU1rV3ww0ng5bgvD20AgOlIaYBvRq8EI 5Dxo2og2T1UjDN44GOSWsw5jetvVQ+SPeNPQLWZJS9pNCzFQ/3QDWNPOvHqEeRcz WkOTCqbOSZYvoSPvZ3APh+1W6nqiyoku/FCv9otSCtXPKtyVa23hBQ+iuxqIM4/R gncnUKASi6KQrWMQiAI5UDCtq1c09uzjw+JaEzAznxEgqftTOmXAJSQGqZGd6HpD ZqTjb+WBJQ== -----END CERTIFICATE----- subject=/OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com issuer=/C=RO/O=GLOBE HOSTING CERTIFICATION AUTHORITY/CN=GLOBE SSL Domain Validated CA --- No client certificate CA names sent --- SSL handshake has read 3313 bytes and written 343 bytes --- New, TLSv1/SSLv3, Cipher is DHE-RSA-AES256-SHA Server public key is 2048 bit Secure Renegotiation IS supported Compression: NONE Expansion: NONE SSL-Session: Protocol : TLSv1 Cipher : DHE-RSA-AES256-SHA Session-ID: 5F9C8DC277A372E28A4684BAE5B311533AD30E251369D144A13DECA3078E067F Session-ID-ctx: Master-Key: 9B531A75347E6E7D19D95365C1208F2ED37E4004AA8F71FC614A18937BEE2ED9F82D58925E0B3931492AD3D2AA6EFD3B Key-Arg : None Start Time: 1288618211 Timeout : 300 (sec) Verify return code: 21 (unable to verify the first certificate) ---

    Read the article

  • php-fpm start error

    - by Sujay
    I am using php-fpm. I recently recompiled php for including imap functions. But on php-fpm start it gives the following error: Starting php_fpm Error in argument 1, char 1: no argument for option - Usage: php-cgi [-q] [-h] [-s] [-v] [-i] [-f ] php-cgi [args...] -a Run interactively -C Do not chdir to the script's directory -c | Look for php.ini file in this directory -n No php.ini file will be used -d foo[=bar] Define INI entry foo with value 'bar' -e Generate extended information for debugger/profiler -f Parse . Implies `-q' -h This help -i PHP information -l Syntax check only (lint) -m Show compiled in modules -q Quiet-mode. Suppress HTTP Header output. -s Display colour syntax highlighted source. -v Version number -w Display source with stripped comments and whitespace. -z Load Zend extension ................................... failed What could be the problem? Is it in php-fpm.conf or php.ini.

    Read the article

  • Windows Server 2008 R2 Firewall - Interface specific rules

    - by Mehmet Ergut
    I'm trying to define per interface rules, much like it was in Server 2003. We will be replacing our old 2003 server with a new 2008 R2 server. The server runs IIS and SQL Server. It's a dedicated server at the hosting company. We use a OpenVPN connection from the office to access SQL server, RDesktop, FTP and other administrative services. Only http and ssh is listening on the public interface. On the old server running 2003, I was able to define global rules for http and ssh, and allow other services only on the vpn interface. I can't find a way to do the same on 2008 R2. I understand that there is the Network Location Awareness service, firewall rules are applied according to the current network location. But I don't understand the purpose of this on a server. The only close solution I found is to set the scope on the firewall rule and restrict remote ip addresses to the private subnet of the office. But the ports will still be listening on the public interface. So how can I restrict a firewall rule to the connections coming from the vpn interface ? A note on this page states that scoping a rule to an interface does not exist anymore: In earlier versions of Windows, many of these command accepted a parameter called interface. This parameter is not supported in the firewall context in Windows Vista or later versions of Windows. I can't believe that they simply decided to remove a core firewall functionality that every firewall has. There must be a way to restrict a rule to an interface. Any ideas ? I'm still unable to find an adequate solution to my problem. So for now, my workaround is this: Administrative services listen on VPN IP address Firewall rules restrict the scope to the local IP address of VPN Public services listen on all interfaces, no scope restriction on firewall rules This is not optimal, if I change the IP address of the VPN, I need to edit the firewall rules too. It won't be the case if the rules were bound to the interface.

    Read the article

< Previous Page | 217 218 219 220 221 222 223 224 225 226 227 228  | Next Page >