Monthly Archives

Articles indexed in October 2013

Page 247/261 | < Previous Page | 243 244 245 246 247 248 249 250 251 252 253 254  | Next Page >

  • Prevent click event on the clicked element?

    - by nainy
    I have a click event on the body of my document: $("body").on('click.findElem', function(e) { e.stopPropagation(); e.preventDefault(); self.hinter(e.target); return false; }); It basically catches the clicked target and does something to it. However, there are some targets that already have a click event on them, and they prevent my click from being executed at all. How do I overcome that issue? I tried unbinding it, but the click doesn't even work at all to actually execute the unbinding.

    Read the article

  • Self organizing layouts

    - by user613326
    Quite a while ago i was more in websites building then i am now. In my time there where huge debates about what to use; tables or pure CSS alternatives. I went out of the webdesigning, but now an old question re-surfaces. What i would like to create is a web page design that depending on screensize, would self organize the page into columns, so that for example on a PDA it would show 1 column On an old computer monitor, it would show 2 colomns, and on a widescreen laptop it would show 3 columns. I forgot how this was called and how it was done in the past, it had to do with XML and storing data seperate from design (if i remember well), perhaps these days better methods exist to do that, does this, anyone ring this a bell ? Also i note a lot is possible with Jquery and and brouwser depending webkits. But i need to make sure that it would run on all (modern) brouwsers : Iexplorer, Firefox, chrome And Jquery is nice too, but i am kinda woried that some day one of these brouwser vendors decides that jscript like java isnt enabled by default (or is that very unlikely ?)11 Perhaps someone can point me to a method that is the prefered way to do this.

    Read the article

  • Linq Getting Customers group by date and then by their type

    - by Nitin varpe
    I am working on generating report for showing customer using LINQ in C#. I want to show no. of customers of each type. There are 3 types of customer registered, guest and manager. I want to group by customers by registered date and then by type of customer. i.e If today 3 guest, 4 registered and 2 manager are inserted. and tomorrow 4,5 and 6 are registered resp. then report should show Number of customers registerd on the day . separate row for each type. DATE TYPEOF CUSTOMER COUNT 31-10-2013 GUEST 3 31-10-2013 REGISTERED 4 31-10-2013 MANAGER 2 30-10-2013 GUEST 5 30-10-2013 REGISTERED 10 30-10-2013 MANAGER 3 LIKE THIS . var subquery = from eat in _customerRepo.Table group eat by new { yy = eat.CreatedOnUTC.Value.Year, mm = eat.CreatedOnUTC.Value.Month, dd = eat.CreatedOnUTC.Value.Day } into g select new { Id = g.Min(x => x.Id) }; var query = from c in _customerRepo.Table join cin in subquery.Distinct() on c.Id equals cin.Id select c; By above query I get minimum cutomers registerd on that day Thanks in advance

    Read the article

  • Cannot find symbol - variable

    - by Ben Garside
    I'm new to Java, and I'm trying to get user input, store each line of input as a variable and then return each value so that it can be passed on somewhere else. When I try and compile it is telling me that it can't find the variable magnitude. I'm assuming it won't find the others either. I'm guessing that this is because I've declare the variables inside of the "try" but don't know how to get it so that the return statement accepts them. Code is as follows: public Earthquake userAddEarthquake() { Scanner scanner = new Scanner(System.in); try{ // convert the string read from the scanner into Integer type System.out.println("Please Enter An Earthquake Magnitude: "); Double magnitude = Double.parseDouble(scanner.nextLine()); System.out.println("Please Enter The Earthquakes Latitude Position: "); scanner = new Scanner(System.in); Double positionLatitude = Double.parseDouble(scanner.nextLine()); System.out.print("Please Enter The Earthquakes Longitude Position: "); scanner = new Scanner(System.in); Double positionLongitude = Double.parseDouble(scanner.nextLine()); System.out.print("Please Enter The Year That The Earthquake Occured: "); scanner = new Scanner(System.in); int year = Integer.parseInt(scanner.nextLine()); System.out.println("Magnitude = " + magnitude); } catch(NumberFormatException ne){ System.out.println("Invalid Input"); } finally{ scanner.close(); } return new Earthquake(magnitude, positionLatitude, positionLongitude, year); }

    Read the article

  • Increase width of divs, displayed side by side, using draggable events

    - by Vaibhav Shukla
    I have two divs of fixed length as of now, which loads external URL by dynamically embedding iframes inside them. Divs are appearing next to each other - one on left and other right. As of now, I have fixed their width to 50% each. But, I want to give user a flexibility to increase the width of any div to view the URL inside easily without scrolling horizontally. Something like dragging the border separating the two divs to either left or right according to his need. Is there a way I could achieve this? Please suggest any library or something. I have gone through a library twentytwenty which is used for images. I don't know how will that work for dynamic iframes. Here is the JSFiddle which displays the divs. <div> <div id="originalPage" style="width:54%;height: 730px;float:left"> <p>one div </p> </div> <div id="diffReport" style="width:45%; height: 730px;float:right"> <p>another div</p> </div> </div>

    Read the article

  • disable the Home Button and Back Button"

    - by michael
    i want way to disable the Home Button & Back Button when click on checkbox in application , my application on version 4.2.2 i have code but not work when click on checkbox work stop to application public void HardButtonOnClick(View v) { boolean checked1 = ((CheckBox) v).isChecked(); if(checked1) { SQLiteDatabase db; db = openOrCreateDatabase("Saftey.db", SQLiteDatabase.CREATE_IF_NECESSARY, null); db.setVersion(1); db.setLocale(Locale.getDefault()); db.setLockingEnabled(true); ContentValues values = new ContentValues(); values.put("hardBtn", "YES"); db.update("Setting", values, "id = ?", new String[] { "1" }); Toast.makeText(this, "Hard Button Locked", Toast.LENGTH_LONG).show(); //SharedPreferences pref = getSharedPreferences("pref",0); //SharedPreferences.Editor edit = pref.edit(); //edit.putString("hard","yes"); //edit.commit(); /* String Lock="yes" ; Bundle bundle = new Bundle(); bundle.putString("key", Lock); Intent a = new Intent(Change_setting.this, ChildMode.class); a.putExtras(bundle); startActivity(a);*/ super.onAttachedToWindow(); this.getWindow().setType(WindowManager.LayoutParams.TYPE_KEYGUARD); isLock = true; } else { SQLiteDatabase db; db = openOrCreateDatabase("Saftey.db", SQLiteDatabase.CREATE_IF_NECESSARY, null); db.setVersion(1); db.setLocale(Locale.getDefault()); db.setLockingEnabled(true); ContentValues values = new ContentValues(); values.put("hardBtn", "NO"); db.update("Setting", values, "id = ?", new String[] { "1" }); //SharedPreferences pref = getSharedPreferences("pref",0); //SharedPreferences.Editor edit = pref.edit(); //edit.putString("hard","no"); //edit.commit(); Toast.makeText(this, "Hard Button Un-Locked", Toast.LENGTH_LONG).show(); isLock = false; } } how can work it??

    Read the article

  • Inorder tree traversal in binary tree in C

    - by srk
    In the below code, I'am creating a binary tree using insert function and trying to display the inserted elements using inorder function which follows the logic of In-order traversal.When I run it, numbers are getting inserted but when I try the inorder function( input 3), the program continues for next input without displaying anything. I guess there might be a logical error.Please help me clear it. Thanks in advance... #include<stdio.h> #include<stdlib.h> int i; typedef struct ll { int data; struct ll *left; struct ll *right; } node; node *root1=NULL; // the root node void insert(node *root,int n) { if(root==NULL) //for the first(root) node { root=(node *)malloc(sizeof(node)); root->data=n; root->right=NULL; root->left=NULL; } else { if(n<(root->data)) { root->left=(node *)malloc(sizeof(node)); insert(root->left,n); } else if(n>(root->data)) { root->right=(node *)malloc(sizeof(node)); insert(root->right,n); } else { root->data=n; } } } void inorder(node *root) { if(root!=NULL) { inorder(root->left); printf("%d ",root->data); inorder(root->right); } } main() { int n,choice=1; while(choice!=0) { printf("Enter choice--- 1 for insert, 3 for inorder and 0 for exit\n"); scanf("%d",&choice); switch(choice) { case 1: printf("Enter number to be inserted\n"); scanf("%d",&n); insert(root1,n); break; case 3: inorder(root1); break; default: break; } } }

    Read the article

  • mySQL need to merge fields and get unique rows

    - by jiudev
    i have a database with +1 million rows and the stuktur looks like: CREATE TABLE IF NOT EXISTS `Performance` ( `id` int(11) NOT NULL AUTO_INCREMENT, `CIDs` varchar(100) DEFAULT NULL, `COLOR` varchar(100) DEFAULT NULL, `Name` varchar(255) DEFAULT NULL, `XT` bigint(16) DEFAULT NULL, `MP` varchar(100) DEFAULT NULL, PRIMARY KEY (`id`), KEY `CIDs` (`CIDs`), KEY `COLOR` (`COLOR`), KEY `Name` (`Name`), KEY `XT` (`XT`) ) ENGINE=MyISAM DEFAULT CHARSET=utf8 AUTO_INCREMENT=0 ; insert into `Performance` (`id`, `CIDs`, `COLOR`, `Name`, `XT`, `MP`) VALUES (1, '1253374160', 'test test test test test', 'Load1', '89421331221', ''), (2, '1271672029', NULL, 'Load1', '19421331221', NULL), (3, '1188959688', NULL, 'Load2', '39421331221', NULL), (4, '1271672029', NULL, 'Load3', '49421341221', 'Description'), (5, '1271888888', NULL, 'Load4', '59421331221', 'Description'); The Output should look like: +----+------------+--------------------------+-------------+-------------+-------+-----------+---------+ | id | CIDs | COLOR | XT | MP | Name | PIDs | unqName | +----+------------+--------------------------+-------------+-------------+-------+-----------+---------+ | 1 | 1253374160 | test test test test test | 89421331221 | | Load1 | 1,2 | Load1 | | 3 | 1188959688 | NULL | 39421331221 | NULL | Load2 | 3 | Load2 | | 4 | 1271672029 | NULL | 49421341221 | Description | Load3 | 4,5 | Load3 | +----+------------+--------------------------+-------------+-------------+-------+-----------+---------+ any ideas, how i could do this as fast as possible? I have tried with some group by, but it takes some Minutes :/ Thanks Advance //edit: for the solution with the group by, i needed 4 subquerys :/ //edit2: as requested: select id, CIDs, COLOR, XT, MP, Name, concat(PIDs,",",GROUP_CONCAT(DISTINCT id)) as PIDs, IFNULL(Name,id) as unqName from ( select id, CIDs, COLOR, XT, MP, Name, concat(PIDs,",",GROUP_CONCAT(DISTINCT id)) as PIDs, IFNULL(MP,id) as unqMP from ( select id, CIDs, COLOR, XT, MP, Name, concat(PIDs,",",GROUP_CONCAT(DISTINCT id)) as PIDs, IFNULL(XT,id) as unqXT from ( select id, CIDs, COLOR, XT, MP, Name, GROUP_CONCAT(DISTINCT id) as PIDs, IFNULL(COLOR,id) as unqCOLOR from Performance group by unqCOLOR ) m group by unqXT ) x group by unqMP ) y group by unqName

    Read the article

  • Echo mysql results in a loop?

    - by Roy D. Porter
    I am using turn.js to make a book. Every div within the 'deathnote' div becomes a new page. <div id="deathnote"> //starts book <div style="background-image:url(images/coverpage.jpg);"></div> //creates new page <div style="background-image:url(images/paper.jpg);"></div> //creates new page <div style="background-image:url(images/paper.jpg);"></div> //creates new page </div> //ends book What I am doing is trying to get 3 'content' (content being a name and cause of death) divs onto 1 page, and then generate a new page. So here is what i want: <div id="deathnote"> //starts book <div style="background-image:url(images/coverpage.jpg);"></div> //creates new page <div style="background-image:url(images/paper.jpg);"></div> //creates new page <div style="background-image:url(images/paper.jpg);"> //creates new page but leaves it open <div> CONTENT </div> <div> CONTENT </div> <div> CONTENT </div> </div> //ends the page </div> //ends book Seems simple enough, however the content is data from a MySQL DB, so i have to echo it in using PHP. Here is what i have so far <div id="deathnote"> <div style="background-image:url(images/coverpage.jpg);"></div> <div style="background-image:url(images/paper.jpg);"></div> <div style="background-image:url(images/paper.jpg);"></div> <div style="background-image:url(images/paper.jpg);"></div> <div style="background-image:url(images/paper.jpg);"></div> <div style="background-image:url(images/paper.jpg);"></div> <?php $pagecount = 0; $db = new mysqli('localhost', 'username', 'passw', 'DB'); if($db->connect_errno > 0){ die('Unable to connect to database [' . $db->connect_error . ']'); } $sql = <<<SQL SELECT * FROM `TABLE` SQL; if(!$result = $db->query($sql)){ die('There was an error running the query [' . $db->error . ']'); } //IGNORE ALL OF THE GARBAGE ABOVE. IT IS SIMPLE CONNECTING SCRIPT THAT I KNOW WORKS //THE METHOD I AM HAVING TROUBLE WITH IS BELOW $pagecount = 0; while($row = $result->fetch_assoc()){ //GETS THE VALUE (and makes sure it isn't nothing echo '<div style="background-image:url(images/paper.jpg);">'; //THIS OPENS A NEW PAGE while ($pagecount !== 3) { //KEEPS COUNT OF HOW MUCH CONTENT DIVS IS ON THE PAGE while($row = $result->fetch_assoc()){ //START A CONTENT DIV echo '<div class="content"><div class="name">' . $row['victim'] . '</div><div class="cod">' . $row['cod'] . '</div></div>'; //END A CONTENT DIV $pagecount++; //UP THE PAGE COUNT } } $pagecount=0; //PUT IT BACK TO 0 echo '</div>'; //END PAGE } $db->close(); ?> <div style="background-image:url(images/backpage.jpg);"></div> //BACK PAGE </div> At the moment i seem to be causing and infinite loop so the page won't load. The problem resides within the while loops. Any help is greatly appreciated. Thanks in advance guys. :)

    Read the article

  • Caveates on the html options of <pre> <code> [on hold]

    - by user2935199
    Over at html syntax to display literal string i asked about displaying a literal. When i tried : http://sdrv.ms/1bEsPWz (as the posted sample will not display, i need to show a picture, as i don't have 10 xxx, i can't insert a picture, I am only left with a skydrive reference) In english, the and syntax was tried but it failed to show all content inside the block. It only showed the "is equal to - pre sample " part. I thought - did not care what was inside ? Can some explain how to make a truely literal block display ? I have my reasons why i don't want to have the " syntax in the html. Thanks

    Read the article

  • Canvas - @font-face doesn't work on IE9+

    - by iMoses
    I've created a widget which allows the user to locate free-text over an image using a textarea. When saving the image a background canvas application reads the text and calculates its position, then it draws the text to the canvas over the image and saves a new image file. The font I use for this widget is league-gothic which I am importing using the @font-face method. This seems to work great and without any issues on all browsers except (of-course) for IE9 and IE10. When using internet explorer you can clearly see that the font was indeed loaded since the textarea uses the same font, but when trying to draw the text onto the canvas the font-family reverts to one of its fallback, in this case Arial. I've searched quite a bit and found nothing. Unlike most font issues I found that concern the canvas element, I am completely sure that the font has indeed loaded as I am viewing it before saving the result. Anything at all will help me at the moment. If you have any insight, experience with similar bugs or whatever, please share :) Thanks in advance. P.S. I can't expose a code example at the moment, but if it becomes a problem I'll do my best to provide one.

    Read the article

  • easyui how to set a event on load tab error

    - by joaner
    I'm use easyui tabs load html content: contents.tabs('add',{ title: title, href: href, closable: true, extractor:function(data){ console.log(data); return data; } }); sometime I maybe got a 404, 500 response, but the response error message is not display in the new window. The tab window always show loading style. So I try to find a onLoadError event to catch this error in office manual: http://www.jeasyui.com/documentation/tabs.php , but not exists. Please tell me how to do let me exit the loading status.

    Read the article

  • Keeping Velocity Constant and Player in Position - Sidescrolling

    - by user2904951
    I'm working on a Little Mobile Game with Cocos2D-X and Box2D. The Point where I got stuck is the movement of a box2d-body (the main actor) and the according Sprite. Now I want to : move this Body with a constant velocity along the x-axis, no matter if it's rolling (it's a circleshape) upwards or downwards keep the body nearly sticking to the ground on which it's rolling keep the Body and the according Sprite in the Center of the Screen. What I tried : in the update()- method I used body->SetLinearVelocity(b2Vec2(x,y)) to higher/lower values, if the Body was passing a constant value for his velocity I used to set very high y-Values in body->SetLinearVelocity(b2Vec2(x,y)) First tried to use CCFollow with my playerSprite, which was also Scrolling along the y-axis, as i only need to scroll along the x-axis, so I decided to move the whole layer which is containing the ambience (platforms etc.) to the left of my Screen and my Player Body & Player sprite to the right of the Screen, adjusting the speed values to Keep the Player in the Center of the Screen. Well... ...didn't work as i wanted it to, because each time i set the velocity manually (I also tried to use body->applyLinearImpulse(...) when the Body is moving upwards just as playing around with the value of velocityIterations in world->Step(...)) there's a small delay, which pushes the player Body more or less further of the Center of the Screen. ... didn't also work as I expected it to, because I needed to adjust the x-Values, when the Body was moving upwards to Keep it not getting slowed down, this made my Body even less sticky to the ground.... ... CCFollow did a good Job, except that I didn't want to scroll along the y-axis also and it Forces the overgiven sprite to start in the Center of the Screen. Moving the whole Layer even brought no good results, I have tried a Long time to adjust values of the movement Speed of the layer and the Body to Keep it negating each other, that the player stays nearly in the Center of the Screen.... So my question is : Does anyone of you have any Kind of new Approach for me to solve this cohesive bunch of Problems ? Cheers, Seb

    Read the article

  • How to read postgresql dump file in Python

    - by xorsyst
    I'd like my Python script to read some data out of a postgresql dump file. The Python will be running on a system without postgresql, and needs to process the data in a dump file. It looks fairly straightforward to parse the CREATE TABLE calls to find the column names, then the INSERT INTO rows to build the contents. But I'm sure there would be quite a few gotchas in doing this reliably. Does anyone know of a module which will do this?

    Read the article

  • PHP Connect to 4D Database

    - by Matt Reid
    Trying to connect to 4D Database. PHPINFO says PDO is installed etc etc... Testing on localhost MAMP system. However when I run my code I get: Fatal error: Uncaught exception 'PDOException' with message 'could not find driver' in /Applications/MAMP/htdocs/4d/index.php:12 Stack trace: #0 /Applications/MAMP/htdocs/4d/index.php(12): PDO->__construct('4D:host=127.0.0...', 'test', 'test') #1 {main} thrown in /Applications/MAMP/htdocs/4d/index.php on line 12 My code is: $dsn = '4D:host=127.0.0.1;charset=UTF-8'; $user = 'test'; $pass = 'test'; // Connection to the 4D SQL server $db = new PDO($dsn, $user, $pass); try { echo "OK"; } catch (PDOException $e) { die("Error 4D : " . $e->getMessage()); } Can't put my finger on the error, i'm using the settings under the PHP tab... Thank you.

    Read the article

  • get the current time in C

    - by Antrromet
    I want to get the current time of my system. For that i'm using the following code in C. time_t now; struct tm *mytime = localtime(&now); if ( strftime(buffer, sizeof buffer, "%X", mytime) ) { printf("time1 = \"%s\"\n", buffer); } But the problem of this code is that its giving some random time.Also the random time is different all the time.I want the current time of my system. Can anyone please tell me how to solve this issue?

    Read the article

  • Advantages of a deployment tool over shell

    - by Jimmy
    Currently I have all of my deployment scripts in shell, which installs about 10 programs and configures them. The way I see it shell is a fantastic tool for this: Modular: Only one program per script, this way I can spread the programs across different servers Simple: Shell scripts are extremely simple and don't need any other software installed One-click: I only have to run the shell script once and everything is setup Agnostic: Most programmers can figure out shell, and don't need to know how to use a specific program. Versioning: Since my code is on github a simple git pull and restart all of supervisor will run my latest code. My question is, with all of these advantages, why is it people are constantly telling me to use a tool such as ansible or chef, and not to use shell.

    Read the article

  • performance monitor in iis 7 to monitor which website is using most resources (asp.net)

    - by Karl Cassar
    I am using Windows Server 2008 R2 and IIS 7.5, and am hosting multiple websites on the same webserver. Is it possible to use Performance Monitor to know on average which website is using the most resources? I've added a user-defined Data Collector Set in Performance Monitor collecting data for 1 day. However, I could not find any details which hint which website is using the most resources. Which counters are crucial to monitor websites? The generated report tells me that the top process is w3wp##1 - how can I know which website it corresponds to? I've also tried to add counters for ASP.Net Applications for all object instances, however % Managed Processor Time (estimated) is 0 at all times.

    Read the article

  • Posting data from multiple servers routing through one server to client server

    - by Swaroop Kundeti
    I have 5 webservers behind Load balancer and we have a client server at other end. Client has white listed my 5 webserver public ip so that my webservers will post a file to the client server. Here the problem is my webservers is going to increase and i cannot always ask client to make my new webserver ip's white list. So i would like to make my infra this way, my webservers will post data to the client server routing from a single server. Like assume that web-1 is main server and the remaining 4 web servers will post data to client server routing through main web-1. I was told that this can be achieved by doing IP Tunneling. But i have no idea how to do that. Would be great for any kind of help.

    Read the article

  • Setup IPv4 local on IPv6 VPS

    - by A.D.
    I have a dedicated server running multiple IPv6 only OpenVZ containers. I want them to be able to communicate with the IPv4 internet, but I realized that isn't going to be possible with IPv6 only. So they need to have an IPv4 address as well, not sure if a local address will work for it, but pretty sure it should. I added 169.254.1.100 in the container .conf file, but when I try to start it, I get this : Adding IP address(es): (the IPv6 address) 169.254.1.100 arpsend: 169.254.1.100 is detected on another computer : 00:04:9b:f2:b0:00 vps-net_add WARNING: arpsend -c 1 -w 1 -D -e 169.254.1.100 eth0 FAILED I did a lot of research, and searched serverfault before posting this, but found nothing relating to this.

    Read the article

  • Win 8.1 Hyper-v Full Screen and VPN problems

    - by tr0users
    I need to connect to my office using Cisco VPN software (RSA). Once connected all my internet traffic goes through the employer's VPN and this prevents me from listening to spotify. As a way around this I created a Win 2012 VM that I run in hyper-v from my Windows 8.1 Client. First I RDP to the VM, then I connect to the VPN. This forces the RDP session between my host laptop and the VM to close. I then open the hyper-v manager and double-click my VM to get a connection back (not great because I don't get the use of copy & paste this way). Previously when I opened my VM this way I would have full screen. I'm using a 1920x1080 monitor. Today when I re-open my connection to the VM it is displayed in a window that uses maybe 75% of the full screen. I have tried the menu option View\Full Screen Mode only centres the screen and apply black borders around the outside. Could anyone please suggest how I may solve the VPN or Full Screen problems? Thanks Rob.

    Read the article

  • "This computer has dynamically assigned IP addresses" error when installing Active Directory Domain Controller

    - by smhnaji
    This is a working Windows Server 2008 that I should install Active Directory on it. I found http://www.howtogeek.com/99323/ and followed the steps. After Additional Domain Controller Options, I'm asked the question "This computer has dynamically assigned IP addresses". As I see, the message states that Dynamic IP addressing has been used for the server, while this is wrong. When I come to Network And Sharing Center, and click on Local Area Connections - Properties - Internet Protocol Version 4 (TCP/IPv4) - Properties, I see that the main IP address (as well as DNS Server) and also all other IP addresses are assigned statically. So it should be OK. I cannot believe any server using dynamic IP(s)! Note: No IPv6 has been set for the server. Please tell me why the error is given and which of the options available, should I choose? Note that it's a production server and is working with many users in WORKGROUP. No change should be affected nor to the IPs, neither to users connecting to the server.

    Read the article

  • Ports do not open after rules appended in iptables

    - by user2699451
    I have a server that I am trying to setup for OpenVPN. I have followed all the steps, but I see that when I try to connect to it in Windows, it doesn't allow me, it just hangs on connecting, so I did a nmap scan and I see that port 1194 is not open so naturally I append the rule to open 1194 with: iptables -A INPUT -i eth0 -p tcp --dport 1194 -j ACCEPT followed by service iptables save and service iptables restart which all executed successfully. Then I try again, but it doesn't work and another nmap scan says that port 1194 is closed. Here is the iptables configuration: # Generated by iptables-save v1.4.7 on Thu Oct 31 09:47:38 2013 *nat :PREROUTING ACCEPT [27410:3091993] :POSTROUTING ACCEPT [0:0] :OUTPUT ACCEPT [5042:376160] -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE -A POSTROUTING -o eth0 -j MASQUERADE -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE -A POSTROUTING -j SNAT --to-source 41.185.26.238 -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE COMMIT # Completed on Thu Oct 31 09:47:38 2013 # Generated by iptables-save v1.4.7 on Thu Oct 31 09:47:38 2013 *filter :INPUT ACCEPT [23571:2869068] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [27558:3656524] :vl - [0:0] -A INPUT -p tcp -m tcp --dport 5252 -m comment --comment "SSH Secure" -j ACCEPT -A INPUT -p icmp -m icmp --icmp-type 8 -m state --state NEW,RELATED,ESTABLISHED -$ -A INPUT -i lo -j ACCEPT -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -p tcp -m tcp --dport 22 -m comment --comment "SSH" -j ACCEPT -A INPUT -p tcp -m tcp --dport 80 -m comment --comment "HTTP" -j ACCEPT -A INPUT -p tcp -m tcp --dport 8080 -m comment --comment "HTTPS" -j ACCEPT -A INPUT -p tcp -m tcp --dport 443 -m comment --comment "HTTP Encrypted" -j ACCEP$ -A INPUT -i eth0 -p tcp -m tcp --dport 1723 -j ACCEPT -A INPUT -i eth0 -p gre -j ACCEPT -A INPUT -p udp -m udp --dport 1194 -j ACCEPT -A FORWARD -i ppp+ -o eth0 -j ACCEPT -A FORWARD -i eth0 -o ppp+ -j ACCEPT -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT -A FORWARD -s 10.8.0.0/24 -j ACCEPT -A FORWARD -j REJECT --reject-with icmp-port-unreachable -A OUTPUT -p icmp -m icmp --icmp-type 0 -m state --state RELATED,ESTABLISHED -j A$ COMMIT # Completed on Thu Oct 31 09:47:38 2013 and my nmap scan from: localhost: nmap localhost Starting Nmap 5.51 ( http://nmap.org ) at 2013-10-31 09:53 SAST Nmap scan report for localhost (127.0.0.1) Host is up (0.000011s latency). Other addresses for localhost (not scanned): 127.0.0.1 Not shown: 996 closed ports PORT STATE SERVICE 22/tcp open ssh 25/tcp open smtp 443/tcp open https 1723/tcp open pptp Nmap done: 1 IP address (1 host up) scanned in 0.06 seconds remote pc: nmap [server ip] Starting Nmap 6.00 ( http://nmap.org ) at 2013-10-31 09:53 SAST Nmap scan report for rla04-nix1.wadns.net (41.185.26.238) Host is up (0.025s latency). Not shown: 858 filtered ports, 139 closed ports PORT STATE SERVICE 22/tcp open ssh 443/tcp open https 8008/tcp open http Nmap done: 1 IP address (1 host up) scanned in 15.70 seconds So, I do not know what is causing this, any assistance will be appreciated! UPDATE AFTER FIRST ANSWER::: [root@RLA04-NIX1 ~]# iptables -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT [root@RLA04-NIX1 ~]# iptables -A FORWARD -s 10.8.0.0/24 -j ACCEPT [root@RLA04-NIX1 ~]# iptables -A FORWARD -j REJECT [root@RLA04-NIX1 ~]# iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE [root@RLA04-NIX1 ~]# service iptables save iptables: Saving firewall rules to /etc/sysconfig/iptables:[ OK ] [root@RLA04-NIX1 ~]# service iptables restart iptables: Flushing firewall rules: [ OK ] iptables: Setting chains to policy ACCEPT: filter nat [ OK ] iptables: Unloading modules: [ OK ] iptables: Applying firewall rules: [ OK ] [root@RLA04-NIX1 ~]# lsof -i :1194 -bash: lsof: command not found iptables -L -n Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:5252 /* SSH Secure */ ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 8 state NEW,RELATED,ESTABLISHED ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 /* SSH */ ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 /* HTTP */ ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:8080 /* HTTPS */ ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:443 /* HTTP Encrypted */ ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:1723 ACCEPT 47 -- 0.0.0.0/0 0.0.0.0/0 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:1194 Chain FORWARD (policy ACCEPT) target prot opt source destination ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED ACCEPT all -- 10.8.0.0/24 0.0.0.0/0 REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED ACCEPT all -- 10.8.0.0/24 0.0.0.0/0 REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable Chain OUTPUT (policy ACCEPT) target prot opt source destination ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 0 state RELATED,ESTABLISHED Chain vl (0 references) target prot opt source destination [root@RLA04-NIX1 ~]# nmap localhostt Starting Nmap 5.51 ( http://nmap.org ) at 2013-10-31 11:13 SAST remote pc nmap [server ip] Starting Nmap 6.00 ( http://nmap.org ) at 2013-10-31 11:11 SAST Nmap scan report for rla04-nix1.wadns.net (41.185.26.238) Host is up (0.020s latency). Not shown: 858 filtered ports, 139 closed ports PORT STATE SERVICE 22/tcp open ssh 443/tcp open https 8008/tcp open http Nmap done: 1 IP address (1 host up) scanned in 4.18 seconds localhost nmap localhost Starting Nmap 5.51 ( http://nmap.org ) at 2013-10-31 11:13 SAST Nmap scan report for localhost (127.0.0.1) Host is up (0.000011s latency). Other addresses for localhost (not scanned): 127.0.0.1 Not shown: 996 closed ports PORT STATE SERVICE 22/tcp open ssh 25/tcp open smtp 443/tcp open https 1723/tcp open pptp Nmap done: 1 IP address (1 host up) scanned in 0.06 seconds UPDATE AFTER SCANNING UDP PORTS Sorry, I am noob, I am still learning, but here is the output for: nmap -sU [server ip] Starting Nmap 6.00 ( http://nmap.org ) at 2013-10-31 11:33 SAST Nmap scan report for [server address] ([server ip]) Host is up (0.021s latency). Not shown: 997 open|filtered ports PORT STATE SERVICE 53/udp closed domain 123/udp closed ntp 33459/udp closed unknown Nmap done: 1 IP address (1 host up) scanned in 8.57 seconds btw, no changes have been made since post started (except for iptables changes)

    Read the article

  • Join domain in windows 7 [on hold]

    - by Hassan Ali Khan
    I have created a domain on server machine and when i am trying to join a domain through another machine of windows 7 through the following steps: Goto MY Computer Properties - Change settings - ComputerName - click on change button - click on radio button "Domain" and enter domain name. After that when i click on OK button and enter the username and password credentials. It show me the following error: An attempt to resolve the DNS name of a domain controller in the domain being joined has failed. Please verify this client is configured to reach a DNS server that can resolve DNS names in the target domain

    Read the article

  • Centos + CPanel results in php always running as fgci, instead of cli, as expected

    - by quamis
    I'm having problems with a server configured by someone else. It uses CPanel, and it has Apache+PHP. For some reason, when running php -v as a user, i get "cli" as handler # php -v | head -n 1 PHP 5.3.27 (cli) (built: Oct 15 2013 16:06:48) If a make a PHP script with echo shell_exec("php -v | tail -n 1"), i get PHP 5.3.27 (cgi-fcgi) (built: Oct 15 2013 16:22:16) Why the cli/fcgi difference? I need to fix this so that scripts ran by the apache user would be running as "cli", not "fcgi". As a side-note, i'm not sure how php got installed, because in the package list i see another version installed, instead of the pne reported by php -v # rpm -qa | grep php [.... other packages...] cpanel-php53-5.3.17-5.cp1136.x86_64 rebuild_phpconf --current: /usr/local/cpanel/bin/rebuild_phpconf --current Available handlers: suphp dso fcgi cgi none DEFAULT PHP: 5 PHP4 SAPI: none PHP5 SAPI: dso SUEXEC: enabled RUID2: not installed redhat-release: # cat /etc/redhat-release CentOS release 6.4 (Final) possibly related to http://superuser.com/questions/665809/centos-6-4-running-php-for-root-as-cgi-fcgi-not-cli

    Read the article

< Previous Page | 243 244 245 246 247 248 249 250 251 252 253 254  | Next Page >