Monthly Archives

Articles indexed in June 2012

Page 275/464 | < Previous Page | 271 272 273 274 275 276 277 278 279 280 281 282  | Next Page >

• My new SSD is causing issues. How can I solve them?

  - by Allan

  Computer specs 1 TB harddisc 120 GB 520intel SSD 8 GB DDR3 RAM Athlon Phenom II x64 955 3. 2ghz DK DFI Lanparty FX7900 M3H3 motherboard ASUS ATI RADEON HD6970 2 GB I have bought a new SSD (Intel 520, 120 GB), and wanted to use this as my system disc. I removed the other harddisc, and installed the SSD with the newest firmware. And then Windows 7 I updated Windows 7 with no problems and then put back my old harddrive. I formatted that old harddrive just to clean up at the same time... So at this stage everything was perfect. My new SSD was set as Master 0 Primary it boots on it and I have 1 TB emptyu harddrive I can use for whatever I want. So far no errors at all Now here is the problem, I installed a few games and everytime I tried to play the computer would say Windows must restart because DCOM server process launcher service terminated, or it says Windows must now restart because the Plug and Play service terminated unexpectedly Most commonly this error is caused by a rootkit virus, well I have tried formatting my entire computer, and running every antivirus I could find, so that shouldn't be it. I've also read somewhere it might happen when there are hardware issues. That on the otherhand would make sense, as I just put in a new SSD. I don't expect you to know this error. I haven't found anyone who knew it yet. maybe you can me guide through what might have gone wrong when I placed in the SSD? What have I checked regarding the SSD? It displays the right name when the computer starts up It has the newest firmware Did a 'sfc /scannow' which told me everything was fine I don't know what to do from here. Everything seems to work great with the drive. when I start playing games my computer crashes.

  Read the article

• How can I force Parallels' networking to obtain an IP through a wireless router?

  - by RLH

  Here is my setup. I have a Macbook, Thunderbolt display and an Ethernet connection plugged into the Thunderbolt display. During the day, most of my network use can (and should) operate across the ethernet associated with my display. However, I also need to be able to connect up to a wireless router. This hasn't been a problem on the Mac OS X side, but the program that I need to run on the router has to obtain an IP address from the wireless access point. Considering my current setup, how can I leave it so that I can access the internet in OS X, yet have my Window 7 instance running in Parallels, get it's assigned IP address from a wireless router that my Mac is also connected to? I've fiddled around with the Parallel's network settings for an hour, and I can't get Parallel's to see the router, even though my Mac is certainly connected to it.

  Read the article

• Installing Trac on Windows under Apache 2.2?

  - by Warren P

  Trac is a python-powered bug-tracking and project-management app. According to Trac's wiki, there are several options for installing Trac, a standalone server (tracd), or under a dedicated webserver using one of these options: FastCGI - Not available on windows. mod_wsgi - No version of mod_wsgi available for Apache 2.2.22 and Python 2.7.3-amd64 that actually runs on my system! mod_python - no longer recommended, as mod_python is not actively maintained anymore) CGI -should not be used, as the performance is far from optimal) That leaves me with zero ways to run Trac on Windows. Apache 2.2.22 with ModWSGI loading, crashes the Apache2.2 service on startup without any error logs. Disabling the line in the apache configuration to load mod_wsgi restores sanity. I just want an installation of Trac on windows with Authentication enabled. I am unable to get authenetication to work using basic tracd like this: tracd -p 8000 --basic-auth="c:\tmp,c:\tmp\Passwords.md5.txt,mycompany" c:\tmp\RootFolder And I am unable to get Mod_WSGI installed. I'm going to keep trying to figure out a combination that works, I suspect I should have installed 32 bit python instead of 64 bit python, to start with. Did I do wrong to install Python 64 bit 2.7.3? I tried again with all 32 bit components, and still can't get MOD_WSGI to work with apache 2.2.22. I'm going to try to compile mod_wsgi myself with Visual C++ Express 2010, but it seems to me that it ought to be easier than this to get Trac running on windows, with authentication. Is there a way to run Trac on Windows, under Apache, with authentication? The last "Trac on windows" article died in 2008, leaving only this internet archive link for "Trac on windows" setup.

  Read the article

• Live Screencast under Linux

  - by OmnipotentEntity

  I was having some difficulty with running a Live Screencast under Linux. I've found jtvlc and tried using that, but whenever I use it the stream comes out either blank or lagged with extremely high latency. I have a fast internet connection and a fast computer, but am I perhaps taxing it too much? Any ideas on what I could possibly be doing wrong? # 1. Get an account on http://www.justin.tv/ # 2. Copy streaming key from: http://www.justin.tv/broadcast/adv_other # 2. Install VLC: http://www.videolan.org/vlc/ # 3. Get Win/Mac/Lin Stream Client: \ # http://apiwiki.justin.tv/mediawiki/index.php/Linux_Broadcasting_API # 4. Adjust the vlc parameters to your liking and run VLC like this #!/bin/bash cvlc screen:// --input-slave=pulse:// \ --screen-width 1920 \ --screen-height 1080 \ --screen-fps 5 \ -v input_stream \ --sout='#duplicate{ dst="transcode{ scale=1, venc=x264{ keyint=60 }, vcodec=h264, vb=600, acodec=mp4a, ab=32, channels=2, samplerate=22050 } :rtp{dst=127.0.0.1,port=1234,sdp=file:///tmp/vlc.sdp} "}' \ --sout-transcode-threads=4 & sleep 2 # 5. Run JTVLC to stream like this: ./jtvlc/jtvlc omnipotententity censored /tmp/vlc.sdp # Notes: #- If you want to see what you're about to stream add 'dst=display, ' # before 'dst="transcode[' # More about the VLC parameters: http://wiki.videolan.org/Documentation:Modules/screen

  Read the article

• Multiple Settings for One Monitor

  - by Lynda

  I have my monitor set to the way I like it, it shows colors accurately and not overly bright (white doesn't blind me). However I edit photos for the web and this is great for my screen but I have noticed when looking at other screens my photos will at times looked washed out and not a good presentation. If I manually change my monitor settings to be brighter (and a few other tweaks) I can replicate the look of other monitors close enough to help prevent washed out/blown out photos. Here is the issue, I need to be able to change settings between the two fairly easily. To manually set my monitor for one then back to the other can be time consuming and a pain to set right every time. I would like to be able to preset certain settings (in software) that I can quickly switch between by pressing hotkeys or clicking shortcut on my desktop. I have an AMD video card and have attempted to use the AMD VISION Engine Control Center to add presets then tweak the settings for each. However when I switch between the presets the settings are the same. How do I build presets using the VISION Engine Control Center that actually works (maybe I misunderstand what it is saving?) or is there a way to do this in Windows 7 or free software that actually works decently for this purpose?

  Read the article

• How to recreate Windows Live Mail filter rules in Thunderbird?

  - by FernandoSBS

  I have some filters in Windows Live Mail that I'm trying to port to thunderbird without success. It seems Thunderbird filter is very limited. Here is an ex of a filter i'm trying to recreate: Apply this rule after the message arrives Where the From line contains '[email protected]' or '[email protected]' or 'Programa TAM Fidelidade' and Where the message body contains 'esteja visualizando' and 'por ser cadastrado no Programa TAM Fidelidade' Move it to the Deleted items folder and Stop processing more rules In Thunderbird I can´t combine a list of "or"s with some "and"s, because it only allows you to select "message matches ALL of the criteria below" or "ANY of the below". Am I missing something or it really is very limited?

  Read the article

• Search Replace extended in a html file

  - by Fake4d

  i have a little question. I have a big html file and want to replace lots of things inside a lot of times. The only problem i cant solve is a replace with a variable. Example: <image src="start_files\0002.jpg" style="width:216pt; height:162"> should be transformed in <a href="start_files\0002.jpg" target="_blank"><image src="start_files\0002.jpg" style="width:216pt; height:162"></a> do you have an idea how to do it? I have a windows system with Notepad2 and Notepad++ and i could install a new tool if needed. (like Windows SED). The best solution would be a batch solution where i can add other transformations. Hope you have got good ideas! Thanks forward, Fake4d

  Read the article

• Scroll wheel causes browsers + Windows explorer to go back

  - by KaptajnKold

  I use Windows 7 on a VirtualBox VM on a Mac. Lately, when I'm using any browser (IE9, Chrome or FireFox or even Windows Explorer), use of the scroll wheel followed by any movement of the mouse cursor causes the browser to go back. Very annoying. This happens when I use the scroll wheel on a USB connected mouse (brand/model unknown, since I don't have it in front of me as I write this) or when I use two-finger scrolling on the trackpad when no mouse is connected. When I connect from my VM to a remote Windows box (Windows Server 2008), I experience the same problem. I have tried rebooting the VM to no avail. I am not sure when the problem started exactly. It may or may not have been after I connected the USB mouse for the first time, but trying to unplug it and then rebooting didn't help. I have tried to google for a solution, but all I've found are people who accidentally pressed the shift key while scrolling, which will cause the browser to go backward or forward in the browser history. This however is not the problem I'm having. To be clear, in my case the browser only goes back when I move the mouse after I've used the scroll wheel. I'm at my wits end :(

  Read the article

• USB 3 to Gigabit Ethernet adapters: where are they?

  - by intuited

  I'm looking for an adapter that will let me use a USB 3 port as a Gigabit Ethernet port. This is proving surprisingly hard to find! Is there some reason why this product is either unavailable or very obscure? Is there an online shop (US/Canada) where I can buy such an item? Newegg, TigerDirect, NCIX, etc. do not seem to carry such an item. I find this surprising since it will provide at least double the bandwidth (possibly quadruple) compared to a USB 2 Ethernet adapter.

  Read the article

• Microsoft Blend 4 Crashes On Splash Screen [closed]

  - by Giora Ron Genender

  Recently I encountered a big problem: Blend 4 always crashes immediately after a splash screen ends. No error numbers mentioned, just a crash window saying "Blend has been crashed, debug or close". Is anybody else familiar with that problem? I tried to get some help from Google but there were no relevant references. I Clicked "Debug" and JIT Debugger was opened, it threw "FataExecutionEngineError" exception... What does it mean?

  Read the article

• String manipulation of type String substitution in mathematical expression

  - by Peterstone

  Imagine something like exp(49/200)+(x-49/200) I want to pass as argument of the function "roundn" whatever operation that is not a addtion or a subtraction So my expresion became roundn(exp(roundn(49/200,n)),n)+(x - roundn(49/200,n) Well the expression I want to manipulate is this: exp(49/200)+exp(49/200)*(x-49/200)+1/2*exp(49/200)*(x-49/200)^2+1/6*exp(49/200)*(x- 49/200)^3+1/24*exp(49/200)*(x-49/200)^4+1/120*exp(49/200)*(x-49/200)^5+1/720*exp(49/200)*(x-49/200)^6+1/5040*exp(49/200)*(x-49/200)^7+1/40320*exp(49/200)*(x-49/200)^8+1/362880*exp(49/200)*(x-49/200)^9+1/3628800*exp(49/200)*(x-49/200)^10+1/39916800*exp(49/200)*(x-49/200)^11 I´m looking for a method (That include whatever program) not based in lenguage programming, as much batch or somithing like that... Thank you!

  Read the article

• Application Screen Repainting Issues

  - by Jeff Sheldon

  I have this issue lately at work. It drives be nuts, and I finally stopped to ask this question. It's quite often that an application I've been running just randomly fails to repaint itself for a while, usually in the editor screen. I most often see this occurring with Expression Web, Visual Studio 2008/2010 and SQL Server Management studio. These applications are what I work in the most, so I'm not surprised to mostly see it here. But I was curious if anyone else had a solution for this. I've tried: Reboots. The screen shot below is about 10 minutes after a reboot. New Video Drivers. This machine is running a Nvidia Quadro NVS 290 video card with the latest drivers. Closing other applications, this is the only thing running right now. As far as hardware, this machine has Dual Quad-Core Xeon 2.83ghz Processors, with 10 gigs of memory, running Windows XP SP3 64bit. Any help would be great. JNK EDIT: Per comments from deleted (wrong) answer: I'm running dual monitors. Set it to single display, still occurred. Rebooted, and tried it again, and it still occurred. Switched it back to dual screen. My resolution is only 1400x900 on each.

  Read the article

• Access 2007: How can I make this EXPRESSION less complex?

  - by Mike

  Access is telling me that my new expression is to complex. It used to work when we had 10 service levels, but now we have 19! Great! My expression is checking the COST of our services in the [PriceCharged] field and then assigning the appropriate HOURS [Servicelevel] when I perform a calculation to work out how much REVENUE each colleague has made when working for a client. The [EstimatedTime] field stores the actual hours each colleague has worked. [EstimatedTime]/[ServiceLevel]*[PriceCharged] Great. Below is the breakdown of my COST to HOURS expression. I've put them on different lines to make it easier to read - please do not be put off by the length of this post, it's all the same info in the end. Many thanks,Mike ServiceLevel: IIf([pricecharged]=100(COST),6(HOURS), IIf([pricecharged]=200 Or [pricecharged]=210,12.5, IIf([pricecharged]=300,19, IIf([pricecharged]=400 Or [pricecharged]=410,25, IIf([pricecharged]=500,31, IIf([pricecharged]=600,37.5, IIf([pricecharged]=700,43, IIf([pricecharged]=800 Or [pricecharged]=810,50, IIf([pricecharged]=900,56, IIf([pricecharged]=1000,62.5, IIf([pricecharged]=1100,69, IIf([pricecharged]=1200 Or [pricecharged]=1210,75, IIf([pricecharged]=1300 Or [pricecharged]=1310,100, IIf([pricecharged]=1400,125, IIf([pricecharged]=1500,150, IIf([pricecharged]=1600,175, IIf([pricecharged]=1700,200, IIf([pricecharged]=1800,225, IIf([pricecharged]=1900,250,0)))))))))))))))))))

  Read the article

• Excel Matching problem with logic expression

  - by abelenky

  I have a block of data that represents the steps in a process and the possible errors: ProcessStep Status FeesPaid OK FormRecvd OK RoleAssigned OK CheckedIn Not Checked In. ReadyToStart Not Ready for Start I want to find the first Status that is not "OK". I have attempted this: =Match("<>""OK""", StatusRange, 0) which is supposed to return the index of the first element in the range that is NOT-EQUAL (<) to "OK" But this doesn't work, instead returning #N/A. I expect it to return 4 (index #4, in a 1-based index, representing that CheckedIn is the first non-OK element) Any ideas how to do this?

  Read the article

• Expression Web 3 - Set Thesaurus

  - by Guy Thomas

  I have recently upgraded from Expression 2 to 3. It's much better, but I cannot get the Thesaurus to work. It worked fine before the upgrade. Precise error message 'No thesaurus is available for English (United Kingkdom)' I am indeed, in the UK. I have set Tools Page Editor Options to first UK and then USA - no joy. In truth I don't mind the US thesaurus, it would certainly beat 'No thesaurus'

  Read the article

• HTG Explains: What Is Two-Factor Authentication and Should I Be Using It?

  - by Jason Fitzpatrick

  More and more banks, credit card companies, and even social media networks and gaming sites are starting to use two-factor authentication. If you’re a little unclear on what it is or on why you’d want to start using it, read on to learn how two-factor authentication can keep your data secure. HTG Explains: What Is Two-Factor Authentication and Should I Be Using It? HTG Explains: What Is Windows RT and What Does It Mean To Me? HTG Explains: How Windows 8′s Secure Boot Feature Works & What It Means for Linux

  Read the article

• How a Hard Drive Works in Slow Motion [Video]

  - by Asian Angel

  This short video lets you have a good luck at a hard drive in slow motion as the actuator arm moves across the disk and then water is added to the equation as well… How a Hard Drive works in Slow Motion – The Slow Mo Guys [via BoingBoing] HTG Explains: What Is Two-Factor Authentication and Should I Be Using It? HTG Explains: What Is Windows RT and What Does It Mean To Me? HTG Explains: How Windows 8′s Secure Boot Feature Works & What It Means for Linux

  Read the article

• Mod Puts Mac OS 7 On the Nook Touch

  - by Jason Fitzpatrick

  Thanks to a mac-hardware emulator for Android, it’s now possible to run Mac OS 7 on the Nook Touch (or other Android-based tablet). If you’ve been looking for some retro-goodness to dump on your Nook or tablet–Oregon Trail anyone?–this simple hack will certainly help. Hit up the link below for additional screenshots and more information. Mini vMac for Android Development Thread [via MikeCanex] HTG Explains: What Is Two-Factor Authentication and Should I Be Using It? HTG Explains: What Is Windows RT and What Does It Mean To Me? HTG Explains: How Windows 8′s Secure Boot Feature Works & What It Means for Linux

  Read the article

• DIY Wirelessly Charged LED Lanterns

  - by Jason Fitzpatrick

  Earlier this year we shared a clever project that turned LEDs, batteries, and PVC into mini, waterproof, and virtually indestructible lanterns. This remake of the project makes the units rechargeable. Our favorite part about this project–the upgrade to an older project and the introduction of wireless charging aside–is the fact that the maker behind it is 15 years old. It’s great to see younger people taking an interest in tinkering! Wirelessly Charged Indestructible Lantern [via Hacked Gadgets] HTG Explains: What Is Two-Factor Authentication and Should I Be Using It? HTG Explains: What Is Windows RT and What Does It Mean To Me? HTG Explains: How Windows 8′s Secure Boot Feature Works & What It Means for Linux

  Read the article

• Google publie PageSpeed Insights 2, un ensemble d'outils open source d'analyse et d'optimisation des pages Web

  Google publie PageSpeed Insights 2.0, un ensemble d'outils open source d'analyse et d'optimisation des pages Web Google a publié la version 2.0 de l'outil PageSpeed Insights, qui apporte un nombre intéressant de nouveautés et améliorations. PageSpeed Insights est un ensemble d'outils open source d'analyse des performances des pages Web et d'optimisation de celles-ci pour améliorer leur temps de chargement. Les outils d'analyses sont disponibles comme des extensions pour Chrome et Firefox , et également comme un service en ligne. Une API d'analyse peut aussi être utilisée via JavaScript, .NET, Go, Java et plusieurs autres langages. Les pages et leurs ressources a...

  Read the article

• Java Spotlight Episode 87: Nandini Ramani on Java FX and Embedded Java

  - by Roger Brinkley

  Interview with Nandini Ramani on JavaFX and Embedded Java. Joining us this week on the Java All Star Developer Panel is Arun Gupta, Java EE Guy. Right-click or Control-click to download this MP3 file. You can also subscribe to the Java Spotlight Podcast Feed to get the latest podcast automatically. If you use iTunes you can open iTunes and subscribe with this link:  Java Spotlight Podcast in iTunes. Show Notes News JFXtras Project: There’s an app for that! JavaOne 2012 content catalog is online Native packaging for JavaFX in 2.2 EL 3.0 Public Review (JSR 341) el-spec.java.net Events June 18-20, QCon, New York City June 19, CJUG, Chicago June 20, 1871, Chicago June 26-28, Jazoon, Zurich, Switzerland Jun 27, Houston JUG July 5, Java Forum, Stuttgart, Germany Jul 13-14, IndicThreads, Delhi July 30-August 1, JVM Language Summit, Santa Clara Feature InterviewNandini Ramani is Vice President of Development at Oracle in the Fusion Middleware Group. She is responsible for the Java Client Platform and has a long history of creating innovation and futures at Sun Microsystems.Nandini launched the JavaFX Platform and tools and had been actively involved in JavaFX since its inception in May 2007. Prior to joining the client group, Nandini was in the Software CTO Office driving the emerging technologies group for incubation projects. She has a background in both hardware and software, having worked in hardware architecture and simulation team in the Accelerated Graphics group and the graphics and media team in the JavaME group. She was involved in the development of XML standards, as Co-Chair of the W3C Scalable Vector Graphics working group and as a member of the W3C Compound Document Formats working group. She was also a member of several graphics and UI related expert groups in the JCP. Mail Bag What’s Cool "OpenJDK is now the heart of a vital piece of technology that runs large parts of our entire civilization.” Java Magazine PetStore using Java EE 6 - Antonio Goncalves

  Read the article

• And the Winner Is ...

  - by Oracle OpenWorld Blog Team

  If you know excellent Oracle technologists, now's your chance to nominate them for an award. by Karen Shamban It’s possible to win an Oracle Excellence Award in one of 12 categories this year—nominations are open now through July 17, 2012. Winning customers and partners will be hosted at Oracle OpenWorld or JavaOne 2012, where they can meet with Oracle executives, network with peers, and be featured in an upcoming edition of an Oracle publication such as Oracle Magazine. This year’s Oracle Excellence Award categories are: •    CIO of the Year•    Database Administrator of the Year•    Eco-Enterprise Innovation•    Java Business Innovation•    Leadership•    Oracle Fusion Middleware Innovation•    Proactive Support Champion–Global•    Specialized Partner of the Year–Europe, Middle East, and Africa•    Specialized Partner of the Year–Global•    Specialized Partner of the Year–North America•    Technologist of the Year Learn more about each award and nominate a deserving candidate now! Go to the Oracle Excellence Awards information page for details.

  Read the article

• E-Business Suite Proactive Support - Workflow Analyzer

  - by Alejandro Sosa

  Overview The Workflow Analyzer is a standalone, easy to run tool created to read, validate and troubleshoot Workflow components configuration as well as runtime. It identifies areas where potential problems may arise and based on set of best practices suggests the Workflow System Administrator what to do when such potential problems are found. This tool represents a proactive way to verify Workflow configuration and runtime data to prevent issues ahead of time before they may become of more considerable impact on a production environment. Installation Since it is standalone there are no pre-requisites and runs on Oracle E-Business applications from 11.5.10 onwards. It is installed in the back-end server and can be run directly from SQL*Plus. The output of this tool is written in a HTML file friendly formatted containing the following on both workflow Components configuration and Workflow Runtime data: Workflow-related database initialization parameters Relevant Oracle E-Business profile option values Workflow-owned concurrent programs schedule and Workflow components status Workflow notification mailer configuration and throughput via related queues and table Workflow-relevant recommended and critical one-off patches as well as current code level Workflow database footprint by reading Workflow run-time tables to identify aged processes not being purged. It also checks for large open and closed processes or unhealthy looping conditions in a workflow process, among other checks. See a sample of Workflow Analyzer's output here.  Besides performing the validations listed above, the Workflow Analyzer provides clarification on the issues it finds and refers the reader to specific Oracle MOS documents to address the findings or explains the condition for the reader to take proper action. How to get it? The Workflow Analyzer can be obtained from Oracle MOS Workflow Analyzer script for E-Business Suite Workflow Monitoring and Maintenance (Doc ID 1369938.1) and the supplemental note How to run EBS Workflow Analyzer Tool as a Concurrent Request (Doc ID 1425053.1) explains how to register and run this tool as a concurrent program. This way the report from the Workflow Analyzer can be submitted from the Application and its output can be seen from the application as well.

  Read the article

• Got Ads?

  - by Kristin Rose

  Four thousand years ago ancient Egyptians invented advertising by carving public notices in steel. Today Oracle is reinventing this celebrated way of getting the message out by letting our Diamond and Platinum Specialized partners leverage Oracle's strong brand recognition to create awareness in their own markets with Oracle Advertisements. Ads can be used for printed publications, event guides or event posters/banners. Visit the current Oracle Advertising Catalog to select an ad that best aligns with your business, and click here to find out how to get started. We look forward to partnering with you to help promote your business. We’re Lovin’ It,The OPN Communications Team

  Read the article

• ODI 11g – Insight to the SDK

  - by David Allan

  This post is a useful index into the ODI SDK that cross references the type names from the user interface with the SDK class and also the finder for how to get a handle on the object or objects. The volume of content in the SDK might seem a little ominous, there is a lot there, but there is a general pattern to the SDK that I will describe here. Also I will illustrate some basic CRUD operations so you can see how the SDK usage pattern works. The examples are written in groovy, you can simply run from the groovy console in ODI 11.1.1.6. Entry to the Platform   Object Finder SDK odiInstance odiInstance (groovy variable for console) OdiInstance Topology Objects Object Finder SDK Technology IOdiTechnologyFinder OdiTechnology Context IOdiContextFinder OdiContext Logical Schema IOdiLogicalSchemaFinder OdiLogicalSchema Data Server IOdiDataServerFinder OdiDataServer Physical Schema IOdiPhysicalSchemaFinder OdiPhysicalSchema Logical Schema to Physical Mapping IOdiContextualSchemaMappingFinder OdiContextualSchemaMapping Logical Agent IOdiLogicalAgentFinder OdiLogicalAgent Physical Agent IOdiPhysicalAgentFinder OdiPhysicalAgent Logical Agent to Physical Mapping IOdiContextualAgentMappingFinder OdiContextualAgentMapping Master Repository IOdiMasterRepositoryInfoFinder OdiMasterRepositoryInfo Work Repository IOdiWorkRepositoryInfoFinder OdiWorkRepositoryInfo Project Objects Object Finder SDK Project IOdiProjectFinder OdiProject Folder IOdiFolderFinder OdiFolder Interface IOdiInterfaceFinder OdiInterface Package IOdiPackageFinder OdiPackage Procedure IOdiUserProcedureFinder OdiUserProcedure User Function IOdiUserFunctionFinder OdiUserFunction Variable IOdiVariableFinder OdiVariable Sequence IOdiSequenceFinder OdiSequence KM IOdiKMFinder OdiKM Load Plans and Scenarios   Object Finder SDK Load Plan IOdiLoadPlanFinder OdiLoadPlan Load Plan and Scenario Folder IOdiScenarioFolderFinder OdiScenarioFolder Model Objects Object Finder SDK Model IOdiModelFinder OdiModel Sub Model IOdiSubModel OdiSubModel DataStore IOdiDataStoreFinder OdiDataStore Column IOdiColumnFinder OdiColumn Key IOdiKeyFinder OdiKey Condition IOdiConditionFinder OdiCondition Operator Objects   Object Finder SDK Session Folder IOdiSessionFolderFinder OdiSessionFolder Session IOdiSessionFinder OdiSession Schedule OdiSchedule How to Create an Object? Here is a simple example to create a project, it uses IOdiEntityManager.persist to persist the object. import oracle.odi.domain.project.OdiProject; import oracle.odi.core.persistence.transaction.support.DefaultTransactionDefinition; txnDef = new DefaultTransactionDefinition(); tm = odiInstance.getTransactionManager() txnStatus = tm.getTransaction(txnDef) project = new OdiProject("Project For Demo", "PROJECT_DEMO") odiInstance.getTransactionalEntityManager().persist(project) tm.commit(txnStatus) How to Update an Object? This update example uses the methods on the OdiProject object to change the project’s name that was created above, it is then persisted. import oracle.odi.domain.project.OdiProject; import oracle.odi.domain.project.finder.IOdiProjectFinder; import oracle.odi.core.persistence.transaction.support.DefaultTransactionDefinition; txnDef = new DefaultTransactionDefinition(); tm = odiInstance.getTransactionManager() txnStatus = tm.getTransaction(txnDef) prjFinder = (IOdiProjectFinder)odiInstance.getTransactionalEntityManager().getFinder(OdiProject.class); project = prjFinder.findByCode("PROJECT_DEMO"); project.setName("A Demo Project"); odiInstance.getTransactionalEntityManager().persist(project) tm.commit(txnStatus) How to Delete an Object? Here is a simple example to delete all of the sessions, it uses IOdiEntityManager.remove to delete the object. import oracle.odi.domain.runtime.session.finder.IOdiSessionFinder; import oracle.odi.domain.runtime.session.OdiSession; import oracle.odi.core.persistence.transaction.support.DefaultTransactionDefinition; txnDef = new DefaultTransactionDefinition(); tm = odiInstance.getTransactionManager() txnStatus = tm.getTransaction(txnDef) sessFinder = (IOdiSessionFinder)odiInstance.getTransactionalEntityManager().getFinder(OdiSession.class); sessc = sessFinder.findAll(); sessItr = sessc.iterator() while (sessItr.hasNext()) {   sess = (OdiSession) sessItr.next()   odiInstance.getTransactionalEntityManager().remove(sess) } tm.commit(txnStatus) This isn't an all encompassing summary of the SDK, but covers a lot of the content to give you a good handle on the objects and how they work. For details of how specific complex objects are created via the SDK, its best to look at postings such as the interface builder posting here. Have fun, happy coding!

  Read the article

< Previous Page | 271 272 273 274 275 276 277 278 279 280 281 282  | Next Page >