Daily Archives

Articles indexed Wednesday November 28 2012

Page 3/17 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Lots of static/crackling noises after ALSA HDA DKMS installation

    - by MartinB
    I am using a Samsung Chronos 7 laptop with the following sound setup: $ head -n 1 /proc/asound/card0/codec* ==> /proc/asound/card0/codec#0 <== Codec: Realtek ALC269VC ==> /proc/asound/card0/codec#3 <== Codec: Intel CougarPoint HDMI With the stock ALSA that comes with Ubuntu 12.04, I do not get any sound out of the headphones when I plug them into the headphone jack. After plugging the headphones in, I have to manually use Alsamixer to increase the volume, so that the headphones become usable. I have been told that this issue is due to my sound chip not being supported in the ALSA version that ships with Precise. A similar question at AskUbuntu and the Ubuntu Community Documentation point me to the ALSA DKMS installation. After installing the dkms module of yesterday's ALSA snapshot and rebooting, the headphone issue is indeed solved. I can now plug my headphones into the jack and instantly have sound on them. However, now I have tons of static noises and crackling when playing sound in VLC player or Skype (Firefox HTML5 playback seems to be fine, unless a Skype sound interferes with it). Is there a fix for this? I tried adding the Alsa PPA and installing the latest ALSA package proper, but that didn't have any effect, only the Alsa DKMS package seems to solve the headphone issue.

    Read the article

  • E: Sub-process /usr/bin/dpkg returned an error code (1) seems to be choking on kde-runtime-data version issue

    - by BMT
    12.04 LTS, on a dell mini 10. Install stable until about a week ago. Updated about 1x a week, sometimes more often. Several days ago, I booted up and the system was no longer working correctly. All these symptoms occurred simultaneously: Cannot run (exit on opening, every time): Update manager, software center, ubuntuOne, libreOffice. Vinagre autostarts on boot, no explanation, not set to startup with Ubuntu. Using apt-get to fix install results in the following: maura@pandora:~$ sudo apt-get -f install Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following package was automatically installed and is no longer required: libtelepathy-farstream2 Use 'apt-get autoremove' to remove them. The following extra packages will be installed: gwibber gwibber-service kde-runtime-data software-center Suggested packages: gwibber-service-flickr gwibber-service-digg gwibber-service-statusnet gwibber-service-foursquare gwibber-service-friendfeed gwibber-service-pingfm gwibber-service-qaiku unity-lens-gwibber The following packages will be upgraded: gwibber gwibber-service kde-runtime-data software-center 4 upgraded, 0 newly installed, 0 to remove and 39 not upgraded. 20 not fully installed or removed. Need to get 0 B/5,682 kB of archives. After this operation, 177 kB of additional disk space will be used. Do you want to continue [Y/n]? debconf: Perl may be unconfigured (Can't locate Scalar/Util.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.14.2 /usr/local/share/perl/5.14.2 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.14 /usr/share/perl/5.14 /usr/local/lib/site_perl .) at /usr/lib/perl/5.14/Hash/Util.pm line 9. BEGIN failed--compilation aborted at /usr/lib/perl/5.14/Hash/Util.pm line 9. Compilation failed in require at /usr/share/perl/5.14/fields.pm line 122. Compilation failed in require at /usr/share/perl5/Debconf/Log.pm line 10. Compilation failed in require at (eval 1) line 4. BEGIN failed--compilation aborted at (eval 1) line 4. ) -- aborting (Reading database ... 242672 files and directories currently installed.) Preparing to replace gwibber 3.4.1-0ubuntu1 (using .../gwibber_3.4.2-0ubuntu1_i386.deb) ... Could not find platform dependent libraries <exec_prefix> Consider setting $PYTHONHOME to <prefix>[:<exec_prefix>] Traceback (most recent call last): File "/usr/bin/pyclean", line 25, in <module> import logging ImportError: No module named logging Error in sys.excepthook: Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/apport_python_hook.py", line 64, in apport_excepthook from apport.fileutils import likely_packaged, get_recent_crashes File "/usr/lib/python2.7/dist-packages/apport/__init__.py", line 1, in <module> from apport.report import Report File "/usr/lib/python2.7/dist-packages/apport/report.py", line 16, in <module> from xml.parsers.expat import ExpatError File "/usr/lib/python2.7/xml/parsers/expat.py", line 4, in <module> from pyexpat import * ImportError: No module named pyexpat Original exception was: Traceback (most recent call last): File "/usr/bin/pyclean", line 25, in <module> import logging ImportError: No module named logging dpkg: warning: subprocess old pre-removal script returned error exit status 1 dpkg - trying script from the new package instead ... Could not find platform dependent libraries <exec_prefix> Consider setting $PYTHONHOME to <prefix>[:<exec_prefix>] Traceback (most recent call last): File "/usr/bin/pyclean", line 25, in <module> import logging ImportError: No module named logging Error in sys.excepthook: Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/apport_python_hook.py", line 64, in apport_excepthook from apport.fileutils import likely_packaged, get_recent_crashes File "/usr/lib/python2.7/dist-packages/apport/__init__.py", line 1, in <module> from apport.report import Report File "/usr/lib/python2.7/dist-packages/apport/report.py", line 16, in <module> from xml.parsers.expat import ExpatError File "/usr/lib/python2.7/xml/parsers/expat.py", line 4, in <module> from pyexpat import * ImportError: No module named pyexpat Original exception was: Traceback (most recent call last): File "/usr/bin/pyclean", line 25, in <module> import logging ImportError: No module named logging dpkg: error processing /var/cache/apt/archives/gwibber_3.4.2-0ubuntu1_i386.deb (--unpack): subprocess new pre-removal script returned error exit status 1 Could not find platform dependent libraries <exec_prefix> Consider setting $PYTHONHOME to <prefix>[:<exec_prefix>] Traceback (most recent call last): File "/usr/bin/pycompile", line 27, in <module> import logging ImportError: No module named logging Error in sys.excepthook: Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/apport_python_hook.py", line 64, in apport_excepthook from apport.fileutils import likely_packaged, get_recent_crashes File "/usr/lib/python2.7/dist-packages/apport/__init__.py", line 1, in <module> from apport.report import Report File "/usr/lib/python2.7/dist-packages/apport/report.py", line 16, in <module> from xml.parsers.expat import ExpatError File "/usr/lib/python2.7/xml/parsers/expat.py", line 4, in <module> from pyexpat import * ImportError: No module named pyexpat Original exception was: Traceback (most recent call last): File "/usr/bin/pycompile", line 27, in <module> import logging ImportError: No module named logging dpkg: error while cleaning up: subprocess installed post-installation script returned error exit status 1 Preparing to replace gwibber-service 3.4.1-0ubuntu1 (using .../gwibber-service_3.4.2-0ubuntu1_all.deb) ... Could not find platform dependent libraries <exec_prefix> Consider setting $PYTHONHOME to <prefix>[:<exec_prefix>] Traceback (most recent call last): File "/usr/bin/pyclean", line 25, in <module> import logging ImportError: No module named logging Error in sys.excepthook: Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/apport_python_hook.py", line 64, in apport_excepthook from apport.fileutils import likely_packaged, get_recent_crashes File "/usr/lib/python2.7/dist-packages/apport/__init__.py", line 1, in <module> from apport.report import Report File "/usr/lib/python2.7/dist-packages/apport/report.py", line 16, in <module> from xml.parsers.expat import ExpatError File "/usr/lib/python2.7/xml/parsers/expat.py", line 4, in <module> from pyexpat import * ImportError: No module named pyexpat Original exception was: Traceback (most recent call last): File "/usr/bin/pyclean", line 25, in <module> import logging ImportError: No module named logging dpkg: warning: subprocess old pre-removal script returned error exit status 1 dpkg - trying script from the new package instead ... Could not find platform dependent libraries <exec_prefix> Consider setting $PYTHONHOME to <prefix>[:<exec_prefix>] Traceback (most recent call last): File "/usr/bin/pyclean", line 25, in <module> import logging ImportError: No module named logging Error in sys.excepthook: Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/apport_python_hook.py", line 64, in apport_excepthook from apport.fileutils import likely_packaged, get_recent_crashes File "/usr/lib/python2.7/dist-packages/apport/__init__.py", line 1, in <module> from apport.report import Report File "/usr/lib/python2.7/dist-packages/apport/report.py", line 16, in <module> from xml.parsers.expat import ExpatError File "/usr/lib/python2.7/xml/parsers/expat.py", line 4, in <module> from pyexpat import * ImportError: No module named pyexpat Original exception was: Traceback (most recent call last): File "/usr/bin/pyclean", line 25, in <module> import logging ImportError: No module named logging dpkg: error processing /var/cache/apt/archives/gwibber-service_3.4.2-0ubuntu1_all.deb (--unpack): subprocess new pre-removal script returned error exit status 1 Could not find platform dependent libraries <exec_prefix> Consider setting $PYTHONHOME to <prefix>[:<exec_prefix>] Traceback (most recent call last): File "/usr/bin/pycompile", line 27, in <module> import logging ImportError: No module named logging Error in sys.excepthook: Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/apport_python_hook.py", line 64, in apport_excepthook from apport.fileutils import likely_packaged, get_recent_crashes File "/usr/lib/python2.7/dist-packages/apport/__init__.py", line 1, in <module> from apport.report import Report File "/usr/lib/python2.7/dist-packages/apport/report.py", line 16, in <module> from xml.parsers.expat import ExpatError File "/usr/lib/python2.7/xml/parsers/expat.py", line 4, in <module> from pyexpat import * ImportError: No module named pyexpat Original exception was: Traceback (most recent call last): File "/usr/bin/pycompile", line 27, in <module> import logging ImportError: No module named logging dpkg: error while cleaning up: subprocess installed post-installation script returned error exit status 1 Preparing to replace kde-runtime-data 4:4.8.3-0ubuntu0.1 (using .../kde-runtime-data_4%3a4.8.4-0ubuntu0.1_all.deb) ... Unpacking replacement kde-runtime-data ... dpkg: error processing /var/cache/apt/archives/kde-runtime-data_4%3a4.8.4-0ubuntu0.1_all.deb (--unpack): trying to overwrite '/usr/share/sounds', which is also in package sound-theme-freedesktop 0.7.pristine-2 dpkg-deb (subprocess): subprocess data was killed by signal (Broken pipe) dpkg-deb: error: subprocess <decompress> returned error exit status 2 Preparing to replace python-crypto 2.4.1-1 (using .../python-crypto_2.4.1-1_i386.deb) ... Could not find platform dependent libraries <exec_prefix> Consider setting $PYTHONHOME to <prefix>[:<exec_prefix>] Traceback (most recent call last): File "/usr/bin/pyclean", line 25, in <module> import logging ImportError: No module named logging Error in sys.excepthook: Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/apport_python_hook.py", line 64, in apport_excepthook from apport.fileutils import likely_packaged, get_recent_crashes File "/usr/lib/python2.7/dist-packages/apport/__init__.py", line 1, in <module> from apport.report import Report File "/usr/lib/python2.7/dist-packages/apport/report.py", line 16, in <module> from xml.parsers.expat import ExpatError File "/usr/lib/python2.7/xml/parsers/expat.py", line 4, in <module> from pyexpat import * ImportError: No module named pyexpat Original exception was: Traceback (most recent call last): File "/usr/bin/pyclean", line 25, in <module> import logging ImportError: No module named logging dpkg: warning: subprocess old pre-removal script returned error exit status 1 dpkg - trying script from the new package instead ... Could not find platform dependent libraries <exec_prefix> Consider setting $PYTHONHOME to <prefix>[:<exec_prefix>] Traceback (most recent call last): File "/usr/bin/pyclean", line 25, in <module> import logging ImportError: No module named logging Error in sys.excepthook: Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/apport_python_hook.py", line 64, in apport_excepthook from apport.fileutils import likely_packaged, get_recent_crashes File "/usr/lib/python2.7/dist-packages/apport/__init__.py", line 1, in <module> from apport.report import Report File "/usr/lib/python2.7/dist-packages/apport/report.py", line 16, in <module> from xml.parsers.expat import ExpatError File "/usr/lib/python2.7/xml/parsers/expat.py", line 4, in <module> from pyexpat import * ImportError: No module named pyexpat Original exception was: Traceback (most recent call last): File "/usr/bin/pyclean", line 25, in <module> import logging ImportError: No module named logging dpkg: error processing /var/cache/apt/archives/python-crypto_2.4.1-1_i386.deb (--unpack): subprocess new pre-removal script returned error exit status 1 No apport report written because MaxReports is reached already Could not find platform dependent libraries <exec_prefix> Consider setting $PYTHONHOME to <prefix>[:<exec_prefix>] Traceback (most recent call last): File "/usr/bin/pycompile", line 27, in <module> import logging ImportError: No module named logging Error in sys.excepthook: Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/apport_python_hook.py", line 64, in apport_excepthook from apport.fileutils import likely_packaged, get_recent_crashes File "/usr/lib/python2.7/dist-packages/apport/__init__.py", line 1, in <module> from apport.report import Report File "/usr/lib/python2.7/dist-packages/apport/report.py", line 16, in <module> from xml.parsers.expat import ExpatError File "/usr/lib/python2.7/xml/parsers/expat.py", line 4, in <module> from pyexpat import * ImportError: No module named pyexpat Original exception was: Traceback (most recent call last): File "/usr/bin/pycompile", line 27, in <module> import logging ImportError: No module named logging dpkg: error while cleaning up: subprocess installed post-installation script returned error exit status 1 Preparing to replace software-center 5.2.2.2 (using .../software-center_5.2.4_all.deb) ... Could not find platform dependent libraries <exec_prefix> Consider setting $PYTHONHOME to <prefix>[:<exec_prefix>] Traceback (most recent call last): File "/usr/bin/pyclean", line 25, in <module> import logging ImportError: No module named logging Error in sys.excepthook: Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/apport_python_hook.py", line 64, in apport_excepthook from apport.fileutils import likely_packaged, get_recent_crashes File "/usr/lib/python2.7/dist-packages/apport/__init__.py", line 1, in <module> from apport.report import Report File "/usr/lib/python2.7/dist-packages/apport/report.py", line 16, in <module> from xml.parsers.expat import ExpatError File "/usr/lib/python2.7/xml/parsers/expat.py", line 4, in <module> from pyexpat import * ImportError: No module named pyexpat Original exception was: Traceback (most recent call last): File "/usr/bin/pyclean", line 25, in <module> import logging ImportError: No module named logging dpkg: warning: subprocess old pre-removal script returned error exit status 1 dpkg - trying script from the new package instead ... Could not find platform dependent libraries <exec_prefix> Consider setting $PYTHONHOME to <prefix>[:<exec_prefix>] Traceback (most recent call last): File "/usr/bin/pyclean", line 25, in <module> import logging ImportError: No module named logging Error in sys.excepthook: Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/apport_python_hook.py", line 64, in apport_excepthook from apport.fileutils import likely_packaged, get_recent_crashes File "/usr/lib/python2.7/dist-packages/apport/__init__.py", line 1, in <module> from apport.report import Report File "/usr/lib/python2.7/dist-packages/apport/report.py", line 16, in <module> from xml.parsers.expat import ExpatError File "/usr/lib/python2.7/xml/parsers/expat.py", line 4, in <module> from pyexpat import * ImportError: No module named pyexpat Original exception was: Traceback (most recent call last): File "/usr/bin/pyclean", line 25, in <module> import logging ImportError: No module named logging dpkg: error processing /var/cache/apt/archives/software-center_5.2.4_all.deb (--unpack): subprocess new pre-removal script returned error exit status 1 No apport report written because MaxReports is reached already Could not find platform dependent libraries <exec_prefix> Consider setting $PYTHONHOME to <prefix>[:<exec_prefix>] Traceback (most recent call last): File "/usr/bin/pycompile", line 27, in <module> import logging ImportError: No module named logging Error in sys.excepthook: Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/apport_python_hook.py", line 64, in apport_excepthook from apport.fileutils import likely_packaged, get_recent_crashes File "/usr/lib/python2.7/dist-packages/apport/__init__.py", line 1, in <module> from apport.report import Report File "/usr/lib/python2.7/dist-packages/apport/report.py", line 16, in <module> from xml.parsers.expat import ExpatError File "/usr/lib/python2.7/xml/parsers/expat.py", line 4, in <module> from pyexpat import * ImportError: No module named pyexpat Original exception was: Traceback (most recent call last): File "/usr/bin/pycompile", line 27, in <module> import logging ImportError: No module named logging dpkg: error while cleaning up: subprocess installed post-installation script returned error exit status 1 Preparing to replace xdiagnose 2.5 (using .../archives/xdiagnose_2.5_all.deb) ... Could not find platform dependent libraries <exec_prefix> Consider setting $PYTHONHOME to <prefix>[:<exec_prefix>] Traceback (most recent call last): File "/usr/bin/pyclean", line 25, in <module> import logging ImportError: No module named logging Error in sys.excepthook: Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/apport_python_hook.py", line 64, in apport_excepthook from apport.fileutils import likely_packaged, get_recent_crashes File "/usr/lib/python2.7/dist-packages/apport/__init__.py", line 1, in <module> from apport.report import Report File "/usr/lib/python2.7/dist-packages/apport/report.py", line 16, in <module> from xml.parsers.expat import ExpatError File "/usr/lib/python2.7/xml/parsers/expat.py", line 4, in <module> from pyexpat import * ImportError: No module named pyexpat Original exception was: Traceback (most recent call last): File "/usr/bin/pyclean", line 25, in <module> import logging ImportError: No module named logging dpkg: warning: subprocess old pre-removal script returned error exit status 1 dpkg - trying script from the new package instead ... Could not find platform dependent libraries <exec_prefix> Consider setting $PYTHONHOME to <prefix>[:<exec_prefix>] Traceback (most recent call last): File "/usr/bin/pyclean", line 25, in <module> import logging ImportError: No module named logging Error in sys.excepthook: Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/apport_python_hook.py", line 64, in apport_excepthook from apport.fileutils import likely_packaged, get_recent_crashes File "/usr/lib/python2.7/dist-packages/apport/__init__.py", line 1, in <module> from apport.report import Report File "/usr/lib/python2.7/dist-packages/apport/report.py", line 16, in <module> from xml.parsers.expat import ExpatError File "/usr/lib/python2.7/xml/parsers/expat.py", line 4, in <module> from pyexpat import * ImportError: No module named pyexpat Original exception was: Traceback (most recent call last): File "/usr/bin/pyclean", line 25, in <module> import logging ImportError: No module named logging dpkg: error processing /var/cache/apt/archives/xdiagnose_2.5_all.deb (--unpack): subprocess new pre-removal script returned error exit status 1 No apport report written because MaxReports is reached already Could not find platform dependent libraries <exec_prefix> Consider setting $PYTHONHOME to <prefix>[:<exec_prefix>] Traceback (most recent call last): File "/usr/bin/pycompile", line 27, in <module> import logging ImportError: No module named logging Error in sys.excepthook: Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/apport_python_hook.py", line 64, in apport_excepthook from apport.fileutils import likely_packaged, get_recent_crashes File "/usr/lib/python2.7/dist-packages/apport/__init__.py", line 1, in <module> from apport.report import Report File "/usr/lib/python2.7/dist-packages/apport/report.py", line 16, in <module> from xml.parsers.expat import ExpatError File "/usr/lib/python2.7/xml/parsers/expat.py", line 4, in <module> from pyexpat import * ImportError: No module named pyexpat Original exception was: Traceback (most recent call last): File "/usr/bin/pycompile", line 27, in <module> import logging ImportError: No module named logging dpkg: error while cleaning up: subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: /var/cache/apt/archives/gwibber_3.4.2-0ubuntu1_i386.deb /var/cache/apt/archives/gwibber-service_3.4.2-0ubuntu1_all.deb /var/cache/apt/archives/kde-runtime-data_4%3a4.8.4-0ubuntu0.1_all.deb /var/cache/apt/archives/python-crypto_2.4.1-1_i386.deb /var/cache/apt/archives/software-center_5.2.4_all.deb /var/cache/apt/archives/xdiagnose_2.5_all.deb E: Sub-process /usr/bin/dpkg returned an error code (1) maura@pandora:~$ ^C maura@pandora:~$

    Read the article

  • ISA Proxy server

    - by user59931
    Have a proxy at work that runs Microsoft ISA. i used to be able to connect using 11.10 with firefox no problem at all. i could either put the settings in firefox or the settings in ubuntu network proxy settings. this would give me a connection no problem ( slow due to the work network being really lame) since i upgraded with 12.10 firefox just crashes if i have any proxy settings (manual added the proxy settings). if i connect to a diffrent network without the proxy settings it works fine and doesn't crash i tried chrome to see if that would work... simular problem. chrome doesn't crash but is so slow it just times out all the time and can take 10min for a page to load.... not really sure where to go with this? i have tried a clean install of 12.04 on 2 diffrent computers and also both tried just upgrading from 11.10. Only answer i can see at the moment is role back to 11.10 :( i have tried all sorts like turning of IPv6 to see if that would make any diffrence but no joy... really am lost now. whats weird is the repositys are also really really slow through 12.04. 50 megs took an hour to download (ISA server has Ubuntu rep servers enables without authenication). really am lost

    Read the article

  • "No caching mode page present" when USB flash disk attached

    - by evgeny9
    When attaching a USB flash disk (NTFS formatted) to a laptop with Ubuntu Server 12.04 on board, I get following messages: [ 3572.355603] sd 2:0:0:0: [sdb] No Caching mode page present [ 3572.355640] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 3572.361599] sd 2:0:0:0: [sdb] No Caching mode page present [ 3572.361636] sd 2:0:0:0: [sdb] Assuming drive cache: write through I get them right in the terminal, so that I should press Ctrl+C to proceed with working (entering commands). Is it normal or do I have to setup Caching mode somehow? Thank you.

    Read the article

  • Google authorship verification issue

    - by Fraser
    I'm trying to get my blog content author verified so my face gets into the Google search results. I managed to achieve this a few weeks back - When testing my content in the Google authorship testing tool it reported that I had been verified and I could see my mug in the results. All I had to do was wait a couple of weeks before I started popping up in the search results (I think(?)). However, I seem to have thrown a spanner in the works. I set up Google apps for my domain and merged my old Google+ profile into my google apps account. This seemed to reset my Google+ profile (no biggy, since it was a new profile and only had 1 connection). I re-set up my G+ account and tied it all in to my blog and it's content. I am now seeing some very strange behaviour. If you take a look at one of my blog posts through the snippet testing tool: http://www.google.com/webmasters/tools/richsnippets?url=http%3A%2F%2Fblog.fraser-hart.co.uk%2Fjquery-fullscreen-background-slideshow%2F&html= You will see that it is not recognising me as an author. However, when you enter my profile URL (https://plus.google.com/108765138229426105004) into the "Authorship verification by email" input, you will see that it does in fact recognise it as verified. Now, if you try and verify the same page again, it reverts back to unverified. I thought I may have to just wait it out but this has been over a week now and previously (before I merged my profile) it happened instantaneously. Has anyone experienced this bizarre behaviour before? What is happening here? More importantly, is there anything I can do to resolve it? (Apologies for the long and boring question). Cheers!

    Read the article

  • In practice, what are the key differences between Heroku and webfaction? [closed]

    - by jdotjdot
    I've been building and hosting webapps, mainly in Django and Flask, for some time now. Mainly, I've been hosting them on Heroku, because of the free tier and the ease of git-enabled application updating. I have seen that a lot of Django users prefer Webfaction. I looked through their offerings, and they seem to me like a standard web hosting service. Questions: Why might be webfaction considered a good hosting service for Django apps? If Heroku is generally called a "Platform-as-a-Service," what does that make Webfaction? Does it have any important similiarities/distinctions from Heroku that I might somehow be missing?

    Read the article

  • Why does max-width behave counter intuitively on columns in a table? [migrated]

    - by Nate
    Basically, I have a stretchy table, I want my label column to be fixed width and my data column to be dynamically sized. My inclination would be to set the max-width via CSS on my label column. However, this has the opposite effect. I've created a jsfiddle that replicates this. (Re-size the window to see the left column dynamically sized and the right column fixed size) On my own site, I see the same behavior and it happens in IE and Chrome. If I switch it, and set max-width on the data column, everything behaves as I want, but it feels backwards to me. Am I doing something wrong here?

    Read the article

  • IIS7.5 + Wordpress + Restrict Access to wp-login.php by client IP address

    - by JuanValdez
    I am moving from an Apache host to IIS. One of my sites in Wordpress (running Multi-site) which give me multiple blogs. I have moved all my rules from my .htaccess to the Microsoft URL ReWrite module. I have one section left that will not import. I want to restrict access to all instances of the file wp-login.php by Client IP address. In my .htaccess file I did the following: <Files wp-login.php> Order Deny,Allow Deny from all Allow from 192.168 </Files> Any smart ideas on how to accompish this in IIS7.5?

    Read the article

  • Keeping Aspect Screen Ration While Stays in Center

    - by David Dimalanta
    I sqw and I tried this suggestion on PISTACHIO BRAINSTORMIN* on how to make a good and adaptive screen ration. For every different screen size, let's say I put the perfect circle as a Texture in LibGDX and played it on screen. Here's the blueberry image example and it's perfectly rounded: When I played it on the Google Nexus 7, the circle turn into a slightly oblonng shape, resembling as it was being flatten a bit. Please observe this snapshot below and you can see the blueberry is almost but slightly not perfectly rounded: Now, when I tried the suggested code for aspect ratio, the perfect circle retained but another problem is occured. The problem is that I expecting for a view on center but instead it's been moved to the right offset leaving with a half black screen. This would be look like this: Here is my code using the suggested screen aspect ratio code: Class' Field // Ingredients Needed for Screen Aspect Ratio private static final int VIRTUAL_WIDTH = 720; private static final int VIRTUAL_HEIGHT = 1280; private static final float ASPECT_RATIO = ((float) VIRTUAL_WIDTH)/((float) VIRTUAL_HEIGHT); private Camera Mother_Camera; private Rectangle Viewport; render() // Camera updating... Mother_Camera.update(); Mother_Camera.apply(Gdx.gl10); // Reseting viewport... Gdx.gl.glViewport((int) Viewport.x, (int) Viewport.y, (int) Viewport.width, (int) Viewport.height); // Clear previous frame. Gdx.gl.glClearColor(0, 0, 0, 1); Gdx.gl.glClear(GL10.GL_COLOR_BUFFER_BIT); show() Mother_Camera = new OrthographicCamera(VIRTUAL_WIDTH, VIRTUAL_HEIGHT); Was this code useful for screen aspect ratio-proportion fixing or it is statically dependent on actual device's width and height? *see http://blog.acamara.es/2012/02/05/keep-screen-aspect-ratio-with-different-resolutions-using-libgdx/#comment-317

    Read the article

  • Which Open Source Licenses can address concerns for an Open Source Game Engine?

    - by Chris
    I am on a team that is looking to open source an engine we are building. It's intended as an engine for Online RPG style games. We're writing it to work on both desktops and android platforms. I've been over to the OSI http://opensource.org/licenses/category to check out the most common licenses. However, this will be my first time going into an open source project and I wanted to know if the community had some insight into which licenses might be best suited. Key licensing concerns: Removing or limiting our liability (most already seem to cover this, but stating for completeness). We want other developers to be able to take part or all of our project and use it in their own projects with proper accreditation to our project. Licensing should not hinder someone's ability to quickly use the engine. They should be able to download a release and start using it without needing to wait on licensing issues. Game content (gfx, sound, etc.) that is not part of the engine should be allowed to be licensed separately. If someone is using our engine, they can retain full copy right of their content, including engine generated data. Our primary goal is exposure, which is why we're going open source to start with. Both for the project and for the individuals developing it. Are there any licenses that can require accreditation visible to players? While I'd put our primary goal as exposure, for licensing the accreditation is less of a concern. From what I've read through (and have been able to understand) it doesn't seem like any of the licenses cover anything that is produced by the licensed software. Are there any that state this specifically, or does simply not mentioning it leave it open for other licensing? Are there any other concerns that we should consider? Has anyone had any issues using any of these licenses?

    Read the article

  • session set for some Actions in Zend framework

    - by user202127
    I'm working on a website , in CV part users have some articles that only logged in users can download them.I want to make changes to the log in Action or preDispatch() to set session for guess users to download the articles, can some one tell me how it can be or give me some reference links. here is my preDispatch(): public function preDispatch() { $userInfo=$this->_auth->getStorage()->read(); $identity= $this->_auth->getIdentity(); if(!$this->_auth->hasIdentity()) { return $this->_helper->redirector('login','login'); } if(!isset($userInfo["member_id"]) || strlen($userInfo["member_id"])==0) { return $this->_helper->redirector('forbidden','login'); } $this->_accessType=2; }

    Read the article

  • Stop Rewrite htaccess create random pages

    - by Vistol
    Recently I saw in my Webmaster tools that some random sites are linking to my site. Actually this is not an big issue. The issue comes when the pages that are linked are not real pages because of my httaccess file. This is the htaccess code that Im running: <pre> #Options +FollowSymLinks RewriteEngine on RewriteRule ^([^/\.]+)/?$ index.php?id=$1 [L] RewriteRule ^([0-9]+)/(.*)$ index.php?id=$1 [L] </pre> So the real URLs would be: mysite.com/folder/999/TITLE-OR-NAME But cecause I only check the 1st folder ($1) which is an I numberD, this htaccess file is allowing hackers linking to my site with random URLs like: mysite.com/folder/999/TITLE-OR-NAME1 mysite.com/folder/999/TITLE-OR-NAME2 mysite.com/folder/999/TITLE-OR-NAME3 mysite.com/folder/999/TITLE-OR-NAME4 mysite.com/folder/999/TITLE-OR-NAME5 The worst part comes when google tells me that I am duplicating content!!! Actually I am not duplicating content, the htaccess is duplicating it for me. And yes I know, Im a bad newbie programmer but Id really appreciate your help with this cause Im struggling to find a solution but it never. Thank you very much for all your support to this newbie :)

    Read the article

  • Execute a block of database querys

    - by Nightmare
    I have the following task to complete: In my program a have a block of database querys or questions. I want to execute these questions and wait for the result of all questions or catch an error if one question fails! My Question object looks like this (simplified): public class DbQuestion(String sql) { [...] } [...] //The answer is just a holder for custom data... public void SetAnswer(DbAnswer answer) { //Store the answer in the question and fire a event to the listeners this.OnAnswered(EventArgs.Empty); } [...] public void SetError() { //Signal an Error in this query! this.OnError(EventArgs.Empty); } So every question fired to the database has a listener that waits for the parsed result. Now I want to fire some questions asynchronous to the database (max. 5 or so) and fire an event with the data from all questions or an error if only one question throws one! Which is the best or a good way to accomplish this task? Can I really execute more then one question parallel and stop all my work when one question throws an error? I think I need some inspiration on this... Just a note: I´m working with .NET framework 2.0

    Read the article

  • need to display textarea after clicking label

    - by Otero
    When I click on a label, just below that some TextArea should be displayed with some predefined text in it and the user shouldn't able to modify the TextArea's content. This is how I tried : <html> <head> <script type="text/javascript"> function myfunc2() { document.getElementById('showthis').style.visibility="visible" } </script> </head> <body> <label onclick="myfunc2()">Click here</label> <textarea id="showthis" style="display:none">dfdsfsfasdfdsfsfasdfssdfsfasf</textarea> </body> </html> iam new to this html and javascript.. pls someone help me on this..

    Read the article

  • linux bash script: set date/time variable to auto-update (for inclusion in file names)

    - by user1859492
    Essentially, I have a standard format for file naming conventions. It breaks down to this: target_dateUTC_timeUTC_tool So, for instance, if I run tcpdump on a target of 'foo', then the file would be foo_dateUTC_timeUTC_tcpdump. Simple enough, but a pain for everyone to constantly (and consistently) enter... so I've tried to create a bash script which sets system variables like so: FILENAME=$TARGET\_$UTCTIME\_$TOOL Then, I can just call the variable at runtime, like so: tcpdump -w $FILENAME.lpc All of this works like a champ. I've got a menu-driven .sh which gives the user the options of viewing the current variables as well as setting them... file generation is a breeze. Unfortunately, by setting the date/time variable, it is locked to the value at the time of creation (naturally). I set the variable like so: UTCTIME=$(/bin/date --utc +"%Y%m%d_%H%M%Z") What I really need is either a way to create a variable which updates at runtime, or (more likely) another way to skin this cat. While scouring for solutions, I came across a similar issues... like this. But, to be honest, I'm stumped on how to marry the two approaches and create a simple, distributable solution. I can post the entire .sh if anyone cares to review (about 120 lines)

    Read the article

  • Convert json data to javascript array - in multi-dimensional sense

    - by AW-GWTF899
    I have a json array say { "People": { "Person": [ {"FirstName": "John", "LastName": "Smith"} {"FirstName": "Joe", "LastName": "Bloggs"} {"FirstName": "Wendy", "LastName": "Deng"} ] } } And I want to convert this into a javascript array (something like this) var persons = [ ["FirstName", "John", "LastName", "Smith"], ["FirstName", "Joe", "LastName", "Bloggs"], ["FirstName", "Wendy", "LastName": "Deng"] ]; How do I accomplish this? Hope my question makes sense and I realise the javascript array initialization may not be the correct way to put it. Thanks.

    Read the article

  • How to print contents from a session variable by looping in a foreach statement

    - by itsover9000
    im trying to write a code where can print and loop through the contents of my session variable by using a foreach statement here is my code <form class="form form-inline" method = "post" action="reportmaker.php"> <select name="rfield"> <option value="">--Select Field--</option> <?php $sc2=mysql_query("SELECT * from searchcolumn s left join report_fields r on s.scol_id=r.field_id where s.category != 'wh'"); foreach($sc2 as $sc){ ?> <option value="<?php echo $sc[advsearch_col]; ?>"><?php echo $sc[advsearch_name]; ?></option> <?php } ?> </select> <button type="submit" value = "submit" id="add" name="add" class="btn pull-right">Add More</button> </form> <?php if(isset($_POST['add'])) { $_SESSION['temp'][]=$_POST['rfield']; } if($_SESSION[temp][]!=""){ foreach($_SESSION[temp][] as $temp) { echo $temp; } } ?> the error that appears with this code is Fatal error: Cannot use [] for reading the line where the error is is this if($_SESSION[temp][]!=""){ i need to print the contents of the session array and this is the only way i know how is there a way to fix this? thanks =========EDIT thanks for the answers guys i finally got it

    Read the article

  • How are property assignment expressions handled in C#?

    - by Serious
    In C# you can use a property as both an lrvalue and rvalue at the same time like this : int n = N = 1; Here is a complete C# sample : class Test { static int n; static int N { get { System.Console.WriteLine("get"); return n; } set { System.Console.WriteLine("set"); n = value; } } static void Main() { int n = N = 1; System.Console.WriteLine("{0}/{1}", n, N); } } You can't do that in C++/CLI as the resulting type of the assignment expression "N = 1" is void. EDIT: here is a C++/CLI sample that shows this : ref class A { public: static property int N; }; int main() { int n = A::N = 1; System::Console::WriteLine("{0}/{1}", n, A::N); } So what's the magic behind C# syntax allowing a void-expression to be used as a rvalue ? Is this special treatment only available for properties or do you know other C# tricks like this ?

    Read the article

  • Extjs - Loading Grid when call

    - by Oxi
    I have form and grid. the user must enter data in form fields then display related records in the grid. I want to implement a search form, e.g: user will type the name and gender of the student, then will get a grid of all students have the same name and gender. So, I use ajax to send form fields value to PHP and then creat a json_encode wich will be used in grid store. I am really not sure if my idea is good. But I haven't found another way to do that. The problem is when I set autoLoad to true in the store, the grid automatically filled with all data - not just what I asked for - So, I understand that I have to set autoLoad to false, but then the result not shown in the grid even it returned successfully in the firebug! I don't know what to do. My View: { xtype: 'panel', layout: "fit", id: 'searchResult', flex: 7, title: '<div style="text-align:center;"/>SearchResultGrid</div>', items: [ { xtype: 'gridpanel', store: 'advSearchStore', id: 'AdvSearch-grid', columns: [ { xtype: 'gridcolumn', dataIndex: 'name', align: 'right', text: 'name' }, { xtype: 'gridcolumn', dataIndex: 'gender', align: 'right', text: 'gender' } ], viewConfig: { id : 'Arr' ,emptyText: 'noResult' }, requires: ['MyApp.PrintSave_toolbar'], dockedItems: [ { xtype: 'PrintSave_tb', dock: 'bottom', } ] } ] }, My Store and Model: Ext.define('AdvSearchPost', { extend: 'Ext.data.Model', proxy: { type: 'ajax', url: 'AdvSearch.php', reader: { type: 'json', root: 'Arr', totalProperty: 'totalCount' } }, fields: [ { name: 'name'}, { name: 'type_and_cargo'} ] }); Ext.create('Ext.data.Store', { pageSize: 10, autoLoad: false, model: 'AdvSearchPost', storeId: 'AdvSearchPost' });

    Read the article

  • Extjs 4.1 How to call controller action method from form

    - by Omar Faruq
    Extjs 4.1 How to call controller action method from form which is already use in a button action but i want this method reuse from a form field but do not how i can do? // here is my controller code init: function() { this.control({ 'itemsgrid': { removeitem: this.removeUser }, 'salewindow button[action=resetAll]': { click: this.resertform }, 'salewindow button[action=saveOrder]' : { click : this.onsaveOrder }, 'salewindow button[action=PDF]' : { click : this. pdfreport } }); }, resertform : function(button){ var store = Ext.data.StoreManager.get('Items'); store.destroy(); var vatstore = Ext.data.StoreManager.get('Vats'); vatstore.reload(); var rebatestore = Ext.data.StoreManager.get('Rebates'); rebatestore.reload(); Ext.getCmp('calculation-form').getForm().reset(); Ext.getCmp('itemform2').getForm().reset(); Ext.getCmp('itemsgrid').subtotalquantity(p=0); store.reload(); var co=store.getCount(); console.log(co); Ext.getCmp('customerID').setValue('0'); var a = Ext.getCmp('customerID').getValue(); Ext.getCmp('itemform2').customerinfo(a); } //and here is my from field listener { xtype : 'textfield', name : 'BranchId', fieldLabel : 'Branch Id', allowNegative : false, id : 'branchid', value : '1', onBlur: function(){ restoreItem();// i want call this method from here whis is stay in controller } }

    Read the article

  • Understanding PTS and DTS in video frames

    - by theateist
    I had fps issues when transcoding from avi to mp4(x264). Eventually the problem was in PTS and DTS values, so lines 12-15 where added before av_interleaved_write_frame function: 1. AVFormatContext* outContainer = NULL; 2. avformat_alloc_output_context2(&outContainer, NULL, "mp4", "c:\\test.mp4"; 3. AVCodec *encoder = avcodec_find_encoder(AV_CODEC_ID_H264); 4. AVStream *outStream = avformat_new_stream(outContainer, encoder); 5. // outStream->codec initiation 6. // ... 7. avformat_write_header(outContainer, NULL); 8. // reading and decoding packet 9. // ... 10. avcodec_encode_video2(outStream->codec, &encodedPacket, decodedFrame, &got_frame) 11. 12. if (encodedPacket.pts != AV_NOPTS_VALUE) 13. encodedPacket.pts = av_rescale_q(encodedPacket.pts, outStream->codec->time_base, outStream->time_base); 14. if (encodedPacket.dts != AV_NOPTS_VALUE) 15. encodedPacket.dts = av_rescale_q(encodedPacket.dts, outStream->codec->time_base, outStream->time_base); 16. 17. av_interleaved_write_frame(outContainer, &encodedPacket) After reading many posts I still do not understand: outStream->codec->time_base = 1/25 and outStream->time_base = 1/12800. The 1st one was set by me but I cannot figure out why and who set 12800? I noticed that before line (7) outStream->time_base = 1/90000 and right after it it changes to 1/12800, why? When I transcode from avi to avi, meaning changing the line (2) to avformat_alloc_output_context2(&outContainer, NULL, "avi", "c:\\test.avi"; , so before and after line (7) outStream->time_base remains always 1/25 and not like in mp4 case, why? What is the difference between time_base of outStream->codec and outStream? To calc the pts av_rescale_q does: takes 2 time_base, multiplies their fractions in cross and then compute the pts. Why it does this in this way? As I debugged, the encodedPacket.pts has value incremental by 1, so why changing it if it does has value? At the beginning the dts value is -2 and after each rescaling it still has negative number, but despite this the video played correctly! Shouldn't it be positive?

    Read the article

  • PHPUnit not working with netbeans 7.2.1

    - by user1578653
    I have just upgraded to netbeans 7.2.1 and phpunit is not working. I get the error:- Cannot run program C:\wamp\bin\php\php5.3.5\PEAR\phpunit-skelgen": CreateProcess error=193, %1 is not a valid Win32 application" when I try to generate PHPUnit tests. The only thing I can think of is that I seem to have a 64 bit version of netbeans installed - could this be the problem? If so, can anyone point me to a 32 bit version, because I couldn't see one on the website?

    Read the article

  • Selenium WebDriver Element

    - by cxyz
    How do i configure selenium WebDriver.I have automated test cases using Selenium.Now i need to automate upload and download of a file.So i have to automate using WebDriver.I had added webdriver-common-0.9.7376.jar.Now how do i instantiate for Internet Explorer? Am just decalring variable and using driver private static WebDriver driver; driver.findElement(By.id(upload)).sendKeys("file to be upload"); Is this correct?

    Read the article

  • How to add/remove rows using SlickGrid

    - by lkahtz
    How to write such functions and bind them to two buttons like "add row" and "remove row": The now working example code only support adding new row by editing on the blank bottom line. <!DOCTYPE HTML> <html> <head> <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1"> <title>SlickGrid example 3: Editing</title> <link rel="stylesheet" href="../slick.grid.css" type="text/css"/> <link rel="stylesheet" href="../css/smoothness/jquery-ui-1.8.16.custom.css" type="text/css"/> <link rel="stylesheet" href="examples.css" type="text/css"/> <style> .cell-title { font-weight: bold; } .cell-effort-driven { text-align: center; } </style> </head> <body> <div style="position:relative"> <div style="width:600px;"> <div id="myGrid" style="width:100%;height:500px;"></div> </div> <div class="options-panel"> <h2>Demonstrates:</h2> <ul> <li>adding basic keyboard navigation and editing</li> <li>custom editors and validators</li> <li>auto-edit settings</li> </ul> <h2>Options:</h2> <button onclick="grid.setOptions({autoEdit:true})">Auto-edit ON</button> &nbsp; <button onclick="grid.setOptions({autoEdit:false})">Auto-edit OFF</button> </div> </div> <script src="../lib/firebugx.js"></script> <script src="../lib/jquery-1.7.min.js"></script> <script src="../lib/jquery-ui-1.8.16.custom.min.js"></script> <script src="../lib/jquery.event.drag-2.0.min.js"></script> <script src="../slick.core.js"></script> <script src="../plugins/slick.cellrangedecorator.js"></script> <script src="../plugins/slick.cellrangeselector.js"></script> <script src="../plugins/slick.cellselectionmodel.js"></script> <script src="../slick.formatters.js"></script> <script src="../slick.editors.js"></script> <script src="../slick.grid.js"></script> <script> function requiredFieldValidator(value) { if (value == null || value == undefined || !value.length) { return {valid: false, msg: "This is a required field"}; } else { return {valid: true, msg: null}; } } var grid; var data = []; var columns = [ {id: "title", name: "Title", field: "title", width: 120, cssClass: "cell-title", editor: Slick.Editors.Text, validator: requiredFieldValidator}, {id: "desc", name: "Description", field: "description", width: 100, editor: Slick.Editors.LongText}, {id: "duration", name: "Duration", field: "duration", editor: Slick.Editors.Text}, {id: "%", name: "% Complete", field: "percentComplete", width: 80, resizable: false, formatter: Slick.Formatters.PercentCompleteBar, editor: Slick.Editors.PercentComplete}, {id: "start", name: "Start", field: "start", minWidth: 60, editor: Slick.Editors.Date}, {id: "finish", name: "Finish", field: "finish", minWidth: 60, editor: Slick.Editors.Date}, {id: "effort-driven", name: "Effort Driven", width: 80, minWidth: 20, maxWidth: 80, cssClass: "cell-effort-driven", field: "effortDriven", formatter: Slick.Formatters.Checkmark, editor: Slick.Editors.Checkbox} ]; var options = { editable: true, enableAddRow: true, enableCellNavigation: true, asyncEditorLoading: false, autoEdit: false }; $(function () { for (var i = 0; i < 500; i++) { var d = (data[i] = {}); d["title"] = "Task " + i; d["description"] = "This is a sample task description.\n It can be multiline"; d["duration"] = "5 days"; d["percentComplete"] = Math.round(Math.random() * 100); d["start"] = "01/01/2009"; d["finish"] = "01/05/2009"; d["effortDriven"] = (i % 5 == 0); } grid = new Slick.Grid("#myGrid", data, columns, options); grid.setSelectionModel(new Slick.CellSelectionModel()); grid.onAddNewRow.subscribe(function (e, args) { var item = args.item; grid.invalidateRow(data.length); data.push(item); grid.updateRowCount(); grid.render(); }); }) </script> </body> </html>

    Read the article

  • Share Localization

    - by fop6316
    I was able to localize my Alfresco Model (+ constraints lists) by following these rules : http://wiki.alfresco.com/wiki/Data_Dictionary_Guide#Model_Localization But I would like to know if there is something similar for Share ? Do we only have to use the "label-id" attributes without worrying of any convention ? Is it better to use : label.companyName=Company name or something like sop_sopModel.field.sop_companyName.title=Company Name or anything else ? I didn't see any recommandation on the wiki. Here is an example of label-id's I don't know how to format. This is a part of my share-config-custom.xml file. I know this is not really important but I would like to do things properly. <config evaluator="aspect" condition="sop:company"> <forms> <form> <field-visibility> <show id="sop:companyName" /> <show id="sop:companyAddress" /> </field-visibility> <appearance> <set id="sopPanel" appearance="bordered-panel" label-id="???" /> <field id="sop:companyName" label-id="???" set="sopPanel" /> <field id="sop:companyAddress" label-id="???" set="sopPanel" /> </appearance> </form> </forms> </config> Thanks

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >