Monthly Archives

Articles indexed in June 2012

Page 348/464 | < Previous Page | 344 345 346 347 348 349 350 351 352 353 354 355  | Next Page >

  • Mapping a Vertex Buffer in DirectX11

    - by judeclarke
    I have a VertexBuffer that I am remapping on a per frame base for a bunch of quads that are constantly updated, sharing the same material\index buffer but have different width/heights. However, currently right now there is a really bad flicker on this geometry. Although it is flickering, the flicker looks correct. I know it is the vertex buffer mapping because if I recreate the entire VB then it will render fine. However, as an optimization I figured I would just remap it. Does anyone know what the problem is? The length (width, size) of the vertex buffer is always the same. One might think it is double buffering, however, it would not be double buffering because it only happens when I map/unmap the buffer, so that leads me to believe that I am setting some parameters wrong on the creation or mapping. I am using DirectX11, my initialization and remap code are: Initialization code D3D11_BUFFER_DESC bd; ZeroMemory( &bd, sizeof(bd) ); bd.Usage = D3D11_USAGE_DYNAMIC; bd.ByteWidth = vertCount * vertexTypeWidth; bd.BindFlags = D3D11_BIND_VERTEX_BUFFER; //bd.CPUAccessFlags = 0; bd.CPUAccessFlags = D3D11_CPU_ACCESS_WRITE; D3D11_SUBRESOURCE_DATA InitData; ZeroMemory( &InitData, sizeof(InitData) ); InitData.pSysMem = vertices; mVertexType = vertexType; HRESULT hResult = device->CreateBuffer( &bd, &InitData, &m_pVertexBuffer ); // This will be S_OK if(hResult != S_OK) return false; Remap code D3D11_MAPPED_SUBRESOURCE resource; HRESULT hResult = deviceContext->Map(m_pVertexBuffer, 0, D3D11_MAP_WRITE_DISCARD, 0, &resource); // This will be S_OK if(hResult != S_OK) return false; resource.pData = vertices; deviceContext->Unmap(m_pVertexBuffer, 0);

    Read the article

  • Using Dijkstra's algorithm with negative edges?

    - by Riddler
    Most books explain the reason the algorithm doesn't work with negative edges as nodes are deleted from the priority queue after the node is arrived at since the algorithm assumes the shortest distance has been found. However since negative edges can reduce the distance, a future shorter distance might be found; but since the node is deleted it cannot be updated. Wouldn't an obvious solution to this be to not delete the node? Why not keep the node in the queue, so if a future shorter distance is found, it can be updated? If I am misunderstanding the problem, what is preventing the algorithm from being used with negative edges?

    Read the article

  • How to setup a mail server on Mac OS X 10.7.4?

    - by 0x90
    I am working in PHP and I have mamp on my machine. I would like to send emails from my PHP code, like this: <?php $to = "[email protected]"; $subject = "Hi!"; $body = "Hi,\n\nHow are you?"; if (mail($to, $subject, $body)) { echo("<p>Message successfully sent!</p>"); } else { echo("<p>Message delivery failed...</p>"); } ?> How can I configure a mail server for free on my machine?

    Read the article

  • phonegap crash on "resume"

    - by fancy
    My phonegap application works great but there is a glitch when it is sent to the background or "paused". When focused is returned to the app a high percentage of the time the interface is frozen and then the application crashes a few seconds later. When relaunched it is working fine again. Could anyone provide some information as to what could be causing this and where I should start trying to debug it? Thanks very much.

    Read the article

  • Phonegap/Cordova orientation change Android 4

    - by user1477576
    I have a problem changing the orientation of the device (Android 4). In other versions it works fine. Versión of Cordova: cordova-1.8.0.js / cordova-1.8.1.js In Android 4 the app crash or show: "A network error occurred. (file:///android_asset/www/index.html)" I searched a lot about this and no answer solves the problem. In most cases users suggest adding: android:configChanges="orientation|keyboardHidden|screenSize" In other cases: super.setIntegerProperty("loadUrlTimeoutValue",60000); That not work for me :( My manifest activity: <activity android:name=".AppNameActivity" android:label="@string/app_name" android:configChanges="orientation|keyboardHidden|screenSize"> <intent-filter> <action android:name="android.intent.action.MAIN" /> <category android:name="android.intent.category.LAUNCHER" /> </intent-filter> </activity> The application should run on Android 2.2 to 4. Thank you very much for the help.

    Read the article

  • Thread too slow. Better way to execute code (Android AndEngine)?

    - by rphello101
    I'm developing a game where the user creates sprites with every touch. I then have a thread run to check to see if those sprites collide with any others. The problem is, if I tap too quickly, I cause a null pointer exception error. I believe it's because I'm tapping faster than my thread is running. This is the thread I have: public class grow implements Runnable{ public grow(Sprite sprite){ } @Override public void run() { float radf, rads; //fill radius/stationary radius float fx=0, fy=0, sx, sy; while(down){ if(spriteC[spriteNum].active){ spriteC[spriteNum].sprite.setScale(spriteC[spriteNum].scale += 0.001); if(spriteC[spriteNum].sprite.collidesWith(ground)||spriteC[spriteNum].sprite.collidesWith(roof)|| spriteC[spriteNum].sprite.collidesWith(left)||spriteC[spriteNum].sprite.collidesWith(right)){ down = false; spriteC[spriteNum].active=false; yourScene.unregisterTouchArea(spriteC[spriteNum].sprite); } fx = spriteC[spriteNum].sprite.getX(); fy = spriteC[spriteNum].sprite.getY(); radf=spriteC[spriteNum].sprite.getHeightScaled()/2; Log.e("F"+Float.toString(fx),Float.toString(fy)); if(spriteNum>0) for(int x=0;x<spriteNum;x++){ rads=spriteC[x].sprite.getHeightScaled()/2; sx = spriteC[x].body.getWorldCenter().x * 32; sy = spriteC[x].body.getWorldCenter().y * 32; Log.e("S"+Float.toString(sx),Float.toString(sy)); Log.e(Float.toString((float) Math.sqrt(Math.pow((fx-sx),2)+Math.pow((fy-sy),2))),Float.toString((radf+rads))); if(Math.sqrt(Math.pow((fx-sx),2)+Math.pow((fy-sy),2))<(radf+rads)){ down = false; spriteC[spriteNum].active=false; yourScene.unregisterTouchArea(spriteC[spriteNum].sprite); Log.e("Collided",Boolean.toString(down)); } } } } spriteC[spriteNum].body = PhysicsFactory.createCircleBody(mPhysicsWorld, spriteC[spriteNum].sprite, BodyType.DynamicBody, FIXTURE_DEF); mPhysicsWorld.registerPhysicsConnector(new PhysicsConnector(spriteC[spriteNum].sprite, spriteC[spriteNum].body, true, true)); } } Better solution anyone? I know there is something to do with a handler, but I don't exactly know what that is or how to use one.

    Read the article

  • What is a valid and reasonable alternative to a massive storage approach?

    - by Backo
    I am using Ruby on Rails 3.2.2 and MySQL. After my previous question on "how to handle massive storage of records in database for user authorization purposes", since related answers (on how to solve the issue or how to accomplish to that I am looking for) aren't sufficiently detailed or require to much resources (at least for me), I would like to know what are valid and reasonable alternatives to that approach. In few words, this question could be phrase as: how to handle "complex" (at level of SQL querying) user authorizations when you have to fetch "authorized" records? That is, for example, how to retrieve records when you would use code like the following (the following code would be used mostly in index controller actions): Article.readable_by_user(@current_user) # => Returns all articles readable by the current user.

    Read the article

  • Proper use of use of "cor" function in R

    - by order
    I am interested to know what a proper x (vector matrix or data frame) input looks like. I am currently using the function in two different sorts of matrices. However, I am not sure how R would interpret my data the way I intend. I will explain the types of matrix by example. Type 1 Gene1 Gene2 Gene3 sample1 sample2 Type 2 Sample1 Sample2 Sample3 gene 1 gene 2 gene 3 Are either of these formats valid x parameters? I input both of types of matrices and get some results, but without knowing whether or not this a proper use the function, these are just random numbers. Thank you for your time. I apologize that this isn't more interesting.

    Read the article

  • Input multiple file names in windows open file dialog box

    - by goodiet
    Windows 7 allows you to select multiple files to open at once by using ctrl or shift key. The "File Name" input field at the bottom of the dialog box would auto populate with the following sample: "aaa.txt" "bbb.txt" "ccc.txt" "ddd.txt" I have 14,000 files in a folder and I only need a range of files (approx 500). When I use the shift key to select a range of files, the "File Name" field auto populates all 500 file names. Windows would cut me off at the 260th character when I try to paste in a pre-generated string into the "File Name" field. Is there a way to bypass the 260 character limit so it would accept my entire string with 500 file names?

    Read the article

  • Eclipc java,writting a program [closed]

    - by ghassar
    I have an important exercise for that i found in the internet please i need help in using eclipc java thanks i have to design, implement, test and document a Java program (a set of classes) for one of the following problem specifications: Problem 1 – Jubilee Estate Agency Property Management System A local Estate Agent would like a prototype system to keep track of properties that are offered for sale. The Estate Agent sells domestic and commercial properties. You will need to define classes that represent the Estate Agency System. You should design your system and the classes that you will need before starting coding. Your system must have a graphical user interface and be designed and developed using the object-oriented principles of the MVC architecture design pattern i.e. the user interface class must be separate from the other classes. The initial basic requirements for the system are as follows: • Include a list of domestic properties for sale that include details of: address, description, selling price, and number of rooms • Include a list of commercial properties for sale that include details of: address, description, selling price, and area in square metres • Enable the properties that are for sale to be viewed on the screen • Allow the customer to select one or more properties to be placed on a ‘viewing list’ so that the properties can be visited in person • Display on the screen the viewing list that shows the details of the properties chosen • Provide a basic search facility to find properties that are for sale in a particular price band and display the results • Enable a property to be marked as sold

    Read the article

  • Stop functions in 5 minutes if they dont end running

    - by george mano
    I want to add a feature in my project. I have 2 functions running in a for-loop because I want to find the solution of the functions in random arrays. I also have an function that makes random arrays. In each loop the array that is made by the random_array fun are the input of the 2 functions. The 2 functions print solutions in the screen , they dont return an argument. int main(){ for (i=0;i<50 i++) { arr1=ramdom_array(); func1(arr1) func2(arr1) } } I need to stop the functions running if they have not ended in 5 minutes. I have thought that I have to put in the functions something like this : void func1(array<array<int,4>,4> initial) { while (5minutes_not_passed) { //do staff if(solution==true) break; } } But I dont know what to put in the 5minutes_not_passed. the declaration of the functions are like this: void func1(array<array<int,4>,4> initial) void func2(array<array<int,4>,4> initial) I have found that I can use the thread library but I dont think meshing up with threads in a good idea. I believe something like a timer is needed. Note that the functions sometimes might end before 5 minutes.

    Read the article

  • How can I Setup overloaded method invocations in Moq?

    - by arootbeer
    I'm trying to mock a mapping interface IMapper: public interface IMapper<TFoo, TBar> { TBar Map(TFoo foo); TFoo Map(TBar bar); } In my test, I'm setting the mock mapper up to expect an invocation of each (around an NHibernate update operation): //... _mapperMock.Setup(m => m.Map(fooMock.Object)).Returns(barMock.Object); _mapperMock.Setup(m => m.Map(barMock.Object)).Returns(fooMock.Object); //... However, when the second Map invocation is made, the mapper mock throws because it is only expecting a single invocation. Watching the mapper mock during setup at runtime, I can look see the Map(TFoo foo) overload get registered, and then see it get replaced when the Map(TBar bar) overload is set up. Is this a problem with the way Moq handles setup, or is there a different syntax I need to use in this case?

    Read the article

  • changing the intensity of lighten/darken on bitmaps using PorterDuffXfermode in the Android Paint class

    - by user1116836
    Ok my orignal question has changed. How do i change the intensity of how something like this is effected? DayToNight.setXfermode(new PorterDuffXfermode(Mode.DST_IN)); in my dream world it would have worked like this DayToNight.setXfermode(new PorterDuffXfermode(Mode.DST_IN(10))); the 10 being a level of intensity. An example would be if I had a flickering candle, when the candle burns bright I want the bitmaps I am drawing to the screen to retain their origanol color and brightness, when it flickers I want the bitmaps to be almost blacked out, and I want to darken the Bitmaps as the light dims. I have equations, timers and all that figured out, just not how to actually apply it to change the color/brightness. Maybe burning the images is what im looking for? I just want to change the lightness lol. I feel like using paint.setShader might be a solution, but the information in this area is pretty limited from what i have been able to find. Any help would be appreciated. edit: to be crystal clear, i am looking for a way to lighten/darken bitmaps as I draw them to the canvas

    Read the article

  • factory class, wrong number of arguments being passed to subclass constructor

    - by Hugh Bothwell
    I was looking at Python: Exception in the separated module works wrong which uses a multi-purpose GnuLibError class to 'stand in' for a variety of different errors. Each sub-error has its own ID number and error format string. I figured it would be better written as a hierarchy of Exception classes, and set out to do so: class GNULibError(Exception): sub_exceptions = 0 # patched with dict of subclasses once subclasses are created err_num = 0 err_format = None def __new__(cls, *args): print("new {}".format(cls)) # DEBUG if len(args) and args[0] in GNULibError.sub_exceptions: print(" factory -> {} {}".format(GNULibError.sub_exceptions[args[0]], args[1:])) # DEBUG return super(GNULibError, cls).__new__(GNULibError.sub_exceptions[args[0]], *(args[1:])) else: print(" plain {} {}".format(cls, args)) # DEBUG return super(GNULibError, cls).__new__(cls, *args) def __init__(self, *args): cls = type(self) print("init {} {}".format(cls, args)) # DEBUG self.args = args if cls.err_format is None: self.message = str(args) else: self.message = "[GNU Error {}] ".format(cls.err_num) + cls.err_format.format(*args) def __str__(self): return self.message def __repr__(self): return '{}{}'.format(type(self).__name__, self.args) class GNULibError_Directory(GNULibError): err_num = 1 err_format = "destination directory does not exist: {}" class GNULibError_Config(GNULibError): err_num = 2 err_format = "configure file does not exist: {}" class GNULibError_Module(GNULibError): err_num = 3 err_format = "selected module does not exist: {}" class GNULibError_Cache(GNULibError): err_num = 4 err_format = "{} is expected to contain gl_M4_BASE({})" class GNULibError_Sourcebase(GNULibError): err_num = 5 err_format = "missing sourcebase argument: {}" class GNULibError_Docbase(GNULibError): err_num = 6 err_format = "missing docbase argument: {}" class GNULibError_Testbase(GNULibError): err_num = 7 err_format = "missing testsbase argument: {}" class GNULibError_Libname(GNULibError): err_num = 8 err_format = "missing libname argument: {}" # patch master class with subclass reference # (TO DO: auto-detect all available subclasses instead of hardcoding them) GNULibError.sub_exceptions = { 1: GNULibError_Directory, 2: GNULibError_Config, 3: GNULibError_Module, 4: GNULibError_Cache, 5: GNULibError_Sourcebase, 6: GNULibError_Docbase, 7: GNULibError_Testbase, 8: GNULibError_Libname } This starts out with GNULibError as a factory class - if you call it with an error number belonging to a recognized subclass, it returns an object belonging to that subclass, otherwise it returns itself as a default error type. Based on this code, the following should be exactly equivalent (but aren't): e = GNULibError(3, 'missing.lib') f = GNULibError_Module('missing.lib') print e # -> '[GNU Error 3] selected module does not exist: 3' print f # -> '[GNU Error 3] selected module does not exist: missing.lib' I added some strategic print statements, and the error seems to be in GNULibError.__new__: >>> e = GNULibError(3, 'missing.lib') new <class '__main__.GNULibError'> factory -> <class '__main__.GNULibError_Module'> ('missing.lib',) # good... init <class '__main__.GNULibError_Module'> (3, 'missing.lib') # NO! ^ why? I call the subclass constructor as subclass.__new__(*args[1:]) - this should drop the 3, the subclass type ID - and yet its __init__ is still getting the 3 anyway! How can I trim the argument list that gets passed to subclass.__init__?

    Read the article

  • Purpose of Instance Methods vs. Class Methods in Objective-C

    - by qegal
    I have checked out all these questions... Difference Class and Instance Methods Difference between class methods and instance methods? Objective-C: Class vs Instance Methods? ...and all they explain is how instance methods are used on instances of a class and class methods are used with the class name, when a message is sent to a class object. This is helpful, but I'm curious to know why one would use a class method vs. an instance method. I'm fairly new to iOS application development, and usually use class methods, and I feel like I'm doing something wrong. Thanks in advanced!

    Read the article

  • PC boot: dl register and drive number

    - by kikou
    I read somewhere in the internet that, before jumping to 0x7c00, the BIOS loads into %dl the "drive number" of the booted device. But what is this "drive number"? Each device attached to the computer is assigned a number by the BIOS? If so, how can I know which number is a given device assigned to? Reading GRUB's source code I found when %dl has bits 0x80 and 0x70 set, it overwrites the whole register with 0x80. Why is that? Here is the code: jmp 3f /* grub-setup may overwrite this jump */ testb $0x80, %dl jz 2f 3: /* Ignore %dl different from 0-0x0f and 0x80-0x8f. */ testb $0x70, %dl jz 1f 2: movb $0x80, %dl 1: By the way. Is there any detailed resource on the boot process of PC's in the web? Specially about what the BIOS does before giving the control to the bootloader and also the standard codes used to communicate with it (like that "drive numer"). I was hoping to write my own bootloader and everything I found is a bit too vague, not technical enough to the point of informing of the exact state of the computer when my bootloader starts to run.

    Read the article

  • Adding the scrollview created by photoscroller to a subview

    - by wierddemon
    I'm trying to modify Apple's PhotoScroller example to make the scrollview that is created into a subview instead of it being a view that takes up the entire screen. Any ideas on how this can be accomplished? - (void)loadView { // Step 1: make the outer paging scroll view CGRect pagingScrollViewFrame = [self frameForPagingScrollView]; pagingScrollView = [[UIScrollView alloc] initWithFrame:pagingScrollViewFrame]; pagingScrollView.pagingEnabled = YES; pagingScrollView.backgroundColor = [UIColor blackColor]; pagingScrollView.showsVerticalScrollIndicator = NO; pagingScrollView.showsHorizontalScrollIndicator = NO; pagingScrollView.contentSize = [self contentSizeForPagingScrollView]; pagingScrollView.delegate = self; // When I do this it fails [self.view addSubview:pagingScrollView]; // Step 2: prepare to tile content recycledPages = [[NSMutableSet alloc] init]; visiblePages = [[NSMutableSet alloc] init]; [self tilePages]; }

    Read the article

  • How to automatically install an app on your iphone?

    - by wdlax11
    I'm looking to find a way to install an app automatically on an iphone. An example would be: I have an app called my.app. It's located on my desktop on my mac. When I plug in my iphone to my computer it automatically installs my.app on to my iphone. Is this possible? Any ideas of how I could possible do this or get a workaround? Or, it needs to prompt the user to install it. The app doesn't need to automatically install; it just needs to automatically prompt the user on the iPhone to ask if they want to install it or not.

    Read the article

  • When to use MVC Scaffolding via NuGet vs MVC Scaffolding via MVC3 Tools Update

    - by James
    I am a little confused about the various different "mainstream" scaffolding options for MVC3. There is a NuGet package called MVCScaffolding. It first showed up in Jan 2011, but seems to be active and have recent updates, and be developed by Scott Hanselman, among others. Then in May 2011 came the MVC3 Tools Update. This seems like it incorporated the original scaffolding ideas into an "out of the box" scaffolding options. However, this has not been updated since. So - what is the relationship between these two scaffoldings (if any). Are there cases when one should be used over the other, or is it just a matter of taste? Does Visual Studio 2012 or MVC4 change the game on any of this? Thanks for any input.

    Read the article

  • How do I get MSDeploy to skip specific folders and file types in folders as CCNet task

    - by Simon Martin
    I want MSDeploy to skip specific folders and file types within other folders when using sync. Currently I'm using CCNet to call MSDeploy with the sync verb to take websites from a build to a staging server. Because there are files on the destination that are created by the application / user uploaded files etc, I need to exclude specific folders from being deleted on the destination. Also there are manifest files created by the site that need to remain on the destination. At the moment I've used -enableRule:DoNotDeleteRule but that leaves stale files on the destination. <exec> <executable>$(MsDeploy)</executable> <baseDirectory>$(ProjectsDirectory)$(projectName)$(ProjectsWorkingDirectory)\Website\</baseDirectory> <buildArgs>-verb:sync -source:iisApp="$(ProjectsDirectory)$(projectName)$(ProjectsWorkingDirectory)\Website\" -dest:iisApp="$(website)/$(websiteFolder)" -enableRule:DoNotDeleteRule</buildArgs> <buildTimeoutSeconds>600</buildTimeoutSeconds> <successExitCodes>0,1,2</successExitCodes> </exec> I have tried to use the skip operation but run into problems. Initially I dropped the DoNotDeleteRule and replaced it with (multiple) skip <exec> <executable>$(MsDeploy)</executable> <baseDirectory>$(ProjectsDirectory)$(projectName)$(ProjectsWorkingDirectory)\Website\</baseDirectory> <buildArgs>-verb:sync -source:iisApp="$(ProjectsDirectory)$(projectName)$(ProjectsWorkingDirectory)\Website\" -dest:iisApp="$(website)/$(websiteFolder)" -skip:objectName=dirPath,absolutePath="assets" -skip:objectName=dirPath,absolutePath="survey" -skip:objectName=dirPath,absolutePath="completion/custom/complete*.aspx" -skip:objectName=dirPath,absolutePath="completion/custom/surveylist*.manifest" -skip:objectName=dirPath,absolutePath="content/scorecardsupport" -skip:objectName=dirPath,absolutePath="Desktop/docs" -skip:objectName=dirPath,absolutePath="_TempImageFiles"</buildArgs> <buildTimeoutSeconds>600</buildTimeoutSeconds> <successExitCodes>0,1,2</successExitCodes> </exec> But this results in the following: Error: Source (iisApp) and destination (contentPath) are not compatible for the given operation. Error count: 1. So I changed from iisApp to contentPath and instead of dirPath,absolutePath just Directory like this: <exec> <executable>$(MsDeploy)</executable> <baseDirectory>$(ProjectsDirectory)$(projectName)$(ProjectsWorkingDirectory)\Website\</baseDirectory> <buildArgs>-verb:sync -source:contentPath="$(ProjectsDirectory)$(projectName)$(ProjectsWorkingDirectory)\Website\" -dest:contentPath="$(website)/$(websiteFolder)" -skip:Directory="assets" -skip:Directory="survey" -skip:Directory="content/scorecardsupport" -skip:Directory="Desktop/docs" -skip:Directory="_TempImageFiles"</buildArgs> <buildTimeoutSeconds>600</buildTimeoutSeconds> <successExitCodes>0,1,2</successExitCodes> </exec> and this gives me an error: Illegal characters in path: < buildresults Info: Adding MSDeploy.contentPath (MSDeploy.contentPath). Info: Adding contentPath (C:\WWWRoot\MySite -skip:Directory=assets -skip:Directory=survey -skip:Directory=content/scorecardsupport -skip:Directory=Desktop/docs -skip:Directory=_TempImageFiles). Info: Adding dirPath (C:\WWWRoot\MySite -skip:Directory=assets -skip:Directory=survey -skip:Directory=content/scorecardsupport -skip:Directory=Desktop/docs -skip:Directory=_TempImageFiles). < /buildresults < buildresults Error: Illegal characters in path. Error count: 1. < /buildresults So I need to know how to configure this task so the folders referenced do not have their contents deleted in a sync and that that *.manifest and *.aspx files in the completion/custom folders are also skipped.

    Read the article

  • JsTree v1.0 - How to manipulate effectively the data from the backend to render the trees and operate correctly?

    - by Jean Paul
    Backend info: PHP 5 / MySQL URL: http://github.com/downloads/vakata/jstree/jstree_pre1.0_fix_1.zip Table structure for table discussions_tree -- CREATE TABLE IF NOT EXISTS `discussions_tree` ( `id` int(11) NOT NULL AUTO_INCREMENT, `parent_id` int(11) NOT NULL DEFAULT '0', `user_id` int(11) NOT NULL DEFAULT '0', `label` varchar(16) DEFAULT NULL, `position` bigint(20) unsigned NOT NULL DEFAULT '0', `left` bigint(20) unsigned NOT NULL DEFAULT '0', `right` bigint(20) unsigned NOT NULL DEFAULT '0', `level` bigint(20) unsigned NOT NULL DEFAULT '0', `type` varchar(255) CHARACTER SET utf8 COLLATE utf8_unicode_ci DEFAULT NULL, `h_label` varchar(16) NOT NULL DEFAULT '', `fulllabel` varchar(255) DEFAULT NULL, UNIQUE KEY `uidx_3` (`id`), KEY `idx_1` (`user_id`), KEY `idx_2` (`parent_id`) ) ENGINE=MyISAM DEFAULT CHARSET=latin1 AUTO_INCREMENT=8 ; /*The first element should in my understanding not even be shown*/ INSERT INTO `discussions_tree` (`id`, `parent_id`, `user_id`, `label`, `position`, `left`, `right`, `level`, `type`, `h_label`, `fulllabel`) VALUES (0, 0, 0, 'Contacts', 0, 1, 1, 0, NULL, '', NULL); INSERT INTO `discussions_tree` (`id`, `parent_id`, `user_id`, `label`, `position`, `left`, `right`, `level`, `type`, `h_label`, `fulllabel`) VALUES (1, 0, 0, 'How to Tag', 1, 2, 2, 0, 'drive', '', NULL); Front End : I've simplified the logic, it has 6 trees actually inside of a panel and that works fine $array = array("Discussions"); $id_arr = array("d"); $nid = 0; foreach ($array as $k=> $value) { $nid++; ?> <li id="<?=$value?>" class="label"> <a href='#<?=$value?>'><span> <?=$value?> </span></a> <div class="sub-menu" style="height:auto; min-height:120px; background-color:#E5E5E5" > <div class="menu" id="menu_<?=$id_arr[$k]?>" style="position:relative; margin-left:56%"> <img src="./js/jsTree/create.png" alt="" id="create" title="Create" > <img src="./js/jsTree/rename.png" alt="" id="rename" title="Rename" > <img src="./js/jsTree/remove.png" alt="" id="remove" title="Delete"> <img src="./js/jsTree/cut.png" alt="" id="cut" title="Cut" > <img src="./js/jsTree/copy.png" alt="" id="copy" title="Copy"> <img src="./js/jsTree/paste.png" alt="" id="paste" title="Paste"> </div> <div id="<?=$id_arr[$k]?>" class="jstree_container"></div> </div> </li> <!-- JavaScript neccessary for this tree : <?=$value?> --> <script type="text/javascript" > jQuery(function ($) { $("#<?=$id_arr[$k]?>").jstree({ // List of active plugins used "plugins" : [ "themes", "json_data", "ui", "crrm" , "hotkeys" , "types" , "dnd", "contextmenu"], // "ui" :{ "initially_select" : ["#node_"+ $nid ] } , "crrm": { "move": { "always_copy": "multitree" }, "input_width_limit":128 }, "core":{ "strings":{ "new_node" : "New Tag" }}, "themes": {"theme": "classic"}, "json_data" : { "ajax" : { "url" : "./js/jsTree/server-<?=$id_arr[$k]?>.php", "data" : function (n) { // the result is fed to the AJAX request `data` option return { "operation" : "get_children", "id" : n.attr ? n.attr("id").replace("node_","") : 1, "state" : "", "user_id": <?=$uid?> }; } } } , "types" : { "max_depth" : -1, "max_children" : -1, "types" : { // The default type "default" : { "hover_node":true, "valid_children" : [ "default" ], }, // The `drive` nodes "drive" : { // can have files and folders inside, but NOT other `drive` nodes "valid_children" : [ "default", "folder" ], "hover_node":true, "icon" : { "image" : "./js/jsTree/root.png" }, // those prevent the functions with the same name to be used on `drive` nodes.. internally the `before` event is used "start_drag" : false, "move_node" : false, "remove_node" : false } } }, "contextmenu" : { "items" : customMenu , "select_node": true} }) //Hover function binded to jstree .bind("hover_node.jstree", function (e, data) { $('ul li[rel="drive"], ul li[rel="default"], ul li[rel=""]').each(function(i) { $(this).find("a").attr('href', $(this).attr("id")+".php" ); }) }) //Create function binded to jstree .bind("create.jstree", function (e, data) { $.post( "./js/jsTree/server-<?=$id_arr[$k]?>.php", { "operation" : "create_node", "id" : data.rslt.parent.attr("id").replace("node_",""), "position" : data.rslt.position, "label" : data.rslt.name, "href" : data.rslt.obj.attr("href"), "type" : data.rslt.obj.attr("rel"), "user_id": <?=$uid?> }, function (r) { if(r.status) { $(data.rslt.obj).attr("id", "node_" + r.id); } else { $.jstree.rollback(data.rlbk); } } ); }) //Remove operation .bind("remove.jstree", function (e, data) { data.rslt.obj.each(function () { $.ajax({ async : false, type: 'POST', url: "./js/jsTree/server-<?=$id_arr[$k]?>.php", data : { "operation" : "remove_node", "id" : this.id.replace("node_",""), "user_id": <?=$uid?> }, success : function (r) { if(!r.status) { data.inst.refresh(); } } }); }); }) //Rename operation .bind("rename.jstree", function (e, data) { data.rslt.obj.each(function () { $.ajax({ async : true, type: 'POST', url: "./js/jsTree/server-<?=$id_arr[$k]?>.php", data : { "operation" : "rename_node", "id" : this.id.replace("node_",""), "label" : data.rslt.new_name, "user_id": <?=$uid?> }, success : function (r) { if(!r.status) { data.inst.refresh(); } } }); }); }) //Move operation .bind("move_node.jstree", function (e, data) { data.rslt.o.each(function (i) { $.ajax({ async : false, type: 'POST', url: "./js/jsTree/server-<?=$id_arr[$k]?>.php", data : { "operation" : "move_node", "id" : $(this).attr("id").replace("node_",""), "ref" : data.rslt.cr === -1 ? 1 : data.rslt.np.attr("id").replace("node_",""), "position" : data.rslt.cp + i, "label" : data.rslt.name, "copy" : data.rslt.cy ? 1 : 0, "user_id": <?=$uid?> }, success : function (r) { if(!r.status) { $.jstree.rollback(data.rlbk); } else { $(data.rslt.oc).attr("id", "node_" + r.id); if(data.rslt.cy && $(data.rslt.oc).children("UL").length) { data.inst.refresh(data.inst._get_parent(data.rslt.oc)); } } } }); }); }); // This is for the context menu to bind with operations on the right clicked node function customMenu(node) { // The default set of all items var control; var items = { createItem: { label: "Create", action: function (node) { return {createItem: this.create(node) }; } }, renameItem: { label: "Rename", action: function (node) { return {renameItem: this.rename(node) }; } }, deleteItem: { label: "Delete", action: function (node) { return {deleteItem: this.remove(node) }; }, "separator_after": true }, copyItem: { label: "Copy", action: function (node) { $(node).addClass("copy"); return {copyItem: this.copy(node) }; } }, cutItem: { label: "Cut", action: function (node) { $(node).addClass("cut"); return {cutItem: this.cut(node) }; } }, pasteItem: { label: "Paste", action: function (node) { $(node).addClass("paste"); return {pasteItem: this.paste(node) }; } } }; // We go over all the selected items as the context menu only takes action on the one that is right clicked $.jstree._reference("#<?=$id_arr[$k]?>").get_selected(false, true).each(function(index,element) { if ( $(element).attr("id") != $(node).attr("id") ) { // Let's deselect all nodes that are unrelated to the context menu -- selected but are not the one right clicked $("#<?=$id_arr[$k]?>").jstree("deselect_node", '#'+$(element).attr("id") ); } }); //if any previous click has the class for copy or cut $("#<?=$id_arr[$k]?>").find("li").each(function(index,element) { if ($(element) != $(node) ) { if( $(element).hasClass("copy") || $(element).hasClass("cut") ) control=1; } else if( $(node).hasClass("cut") || $(node).hasClass("copy")) { control=0; } }); //only remove the class for cut or copy if the current operation is to paste if($(node).hasClass("paste") ) { control=0; // Let's loop through all elements and try to find if the paste operation was done already $("#<?=$id_arr[$k]?>").find("li").each(function(index,element) { if( $(element).hasClass("copy") ) $(this).removeClass("copy"); if ( $(element).hasClass("cut") ) $(this).removeClass("cut"); if ( $(element).hasClass("paste") ) $(this).removeClass("paste"); }); } switch (control) { //Remove the paste item from the context menu case 0: switch ($(node).attr("rel")) { case "drive": delete items.renameItem; delete items.deleteItem; delete items.cutItem; delete items.copyItem; delete items.pasteItem; break; case "default": delete items.pasteItem; break; } break; //Remove the paste item from the context menu only on the node that has either copy or cut added class case 1: if( $(node).hasClass("cut") || $(node).hasClass("copy") ) { switch ($(node).attr("rel")) { case "drive": delete items.renameItem; delete items.deleteItem; delete items.cutItem; delete items.copyItem; delete items.pasteItem; break; case "default": delete items.pasteItem; break; } } else //Re-enable it on the clicked node that does not have the cut or copy class { switch ($(node).attr("rel")) { case "drive": delete items.renameItem; delete items.deleteItem; delete items.cutItem; delete items.copyItem; break; } } break; //initial state don't show the paste option on any node default: switch ($(node).attr("rel")) { case "drive": delete items.renameItem; delete items.deleteItem; delete items.cutItem; delete items.copyItem; delete items.pasteItem; break; case "default": delete items.pasteItem; break; } break; } return items; } $("#menu_<?=$id_arr[$k]?> img").hover( function () { $(this).css({'cursor':'pointer','outline':'1px double teal'}) }, function () { $(this).css({'cursor':'none','outline':'1px groove transparent'}) } ); $("#menu_<?=$id_arr[$k]?> img").click(function () { switch(this.id) { //Create only the first element case "create": if ( $.jstree._reference("#<?=$id_arr[$k]?>").get_selected(false, true).length ) { $.jstree._reference("#<?=$id_arr[$k]?>").get_selected(false, true).each(function(index,element){ switch(index) { case 0: $("#<?=$id_arr[$k]?>").jstree("create", '#'+$(element).attr("id"), null, /*{attr : {href: '#' }}*/null ,null, false); break; default: $("#<?=$id_arr[$k]?>").jstree("deselect_node", '#'+$(element).attr("id") ); break; } }); } else { $.facebox('<p class=\'p_inner error bold\'>A selection needs to be made to work with this operation'); setTimeout(function(){ $.facebox.close(); }, 2000); } break; //REMOVE case "remove": if ( $.jstree._reference("#<?=$id_arr[$k]?>").get_selected(false, true).length ) { $.jstree._reference("#<?=$id_arr[$k]?>").get_selected(false, true).each(function(index,element){ //only execute if the current node is not the first one (drive) if( $(element).attr("id") != $("div.jstree > ul > li").first().attr("id") ) { $("#<?=$id_arr[$k]?>").jstree("remove",'#'+$(element).attr("id")); } else $("#<?=$id_arr[$k]?>").jstree("deselect_node", '#'+$(element).attr("id") ); }); } else { $.facebox('<p class=\'p_inner error bold\'>A selection needs to be made to work with this operation'); setTimeout(function(){ $.facebox.close(); }, 2000); } break; //RENAME NODE only one selection case "rename": if ( $.jstree._reference("#<?=$id_arr[$k]?>").get_selected(false, true).length ) { $.jstree._reference("#<?=$id_arr[$k]?>").get_selected(false, true).each(function(index,element){ if( $(element).attr("id") != $("div.jstree > ul > li").first().attr("id") ) { switch(index) { case 0: $("#<?=$id_arr[$k]?>").jstree("rename", '#'+$(element).attr("id") ); break; default: $("#<?=$id_arr[$k]?>").jstree("deselect_node", '#'+$(element).attr("id") ); break; } } else $("#<?=$id_arr[$k]?>").jstree("deselect_node", '#'+$(element).attr("id") ); }); } else { $.facebox('<p class=\'p_inner error bold\'>A selection needs to be made to work with this operation'); setTimeout(function(){ $.facebox.close(); }, 2000); } break; //Cut case "cut": if ( $.jstree._reference("#<?=$id_arr[$k]?>").get_selected(false, true).length ) { $.jstree._reference("#<?=$id_arr[$k]?>").get_selected(false, true).each(function(index,element){ switch(index) { case 0: $("#<?=$id_arr[$k]?>").jstree("cut", '#'+$(element).attr("id")); $.facebox('<p class=\'p_inner teal\'>Operation "Cut" successfully done.<p class=\'p_inner teal bold\'>Where to place it?'); setTimeout(function(){ $.facebox.close(); $("#<?=$id_arr[$k]?>").jstree("deselect_node", '#'+$(element).attr("id")); }, 2000); break; default: $("#<?=$id_arr[$k]?>").jstree("deselect_node", '#'+$(element).attr("id") ); break; } }); } else { $.facebox('<p class=\'p_inner error bold\'>A selection needs to be made to work with this operation'); setTimeout(function(){ $.facebox.close(); }, 2000); } break; //Copy case "copy": if ( $.jstree._reference("#<?=$id_arr[$k]?>").get_selected(false, true).length ) { $.jstree._reference("#<?=$id_arr[$k]?>").get_selected(false, true).each(function(index,element){ switch(index) { case 0: $("#<?=$id_arr[$k]?>").jstree("copy", '#'+$(element).attr("id")); $.facebox('<p class=\'p_inner teal\'>Operation "Copy": Successfully done.<p class=\'p_inner teal bold\'>Where to place it?'); setTimeout(function(){ $.facebox.close(); $("#<?=$id_arr[$k]?>").jstree("deselect_node", '#'+$(element).attr("id") ); }, 2000); break; default: $("#<?=$id_arr[$k]?>").jstree("deselect_node", '#'+$(element).attr("id") ); break; } }); } else { $.facebox('<p class=\'p_inner error bold\'>A selection needs to be made to work with this operation'); setTimeout(function(){ $.facebox.close(); }, 2000); } break; case "paste": if ( $.jstree._reference("#<?=$id_arr[$k]?>").get_selected(false, true).length ) { $.jstree._reference("#<?=$id_arr[$k]?>").get_selected(false, true).each(function(index,element){ switch(index) { case 0: $("#<?=$id_arr[$k]?>").jstree("paste", '#'+$(element).attr("id")); break; default: $("#<?=$id_arr[$k]?>").jstree("deselect_node", '#'+$(element).attr("id") ); break; } }); } else { $.facebox('<p class=\'p_inner error bold\'>A selection needs to be made to work with this operation'); setTimeout(function(){ $.facebox.close(); }, 2000); } break; } }); <? } ?> server.php $path='../../../..'; require_once "$path/phpfoo/dbif.class"; require_once "$path/global.inc"; // Database config & class $db_config = array( "servername"=> $dbHost, "username" => $dbUser, "password" => $dbPW, "database" => $dbName ); if(extension_loaded("mysqli")) require_once("_inc/class._database_i.php"); else require_once("_inc/class._database.php"); //Tree class require_once("_inc/class.ctree.php"); $dbLink = new dbif(); $dbErr = $dbLink->connect($dbName,$dbUser,$dbPW,$dbHost); $jstree = new json_tree(); if(isset($_GET["reconstruct"])) { $jstree->_reconstruct(); die(); } if(isset($_GET["analyze"])) { echo $jstree->_analyze(); die(); } $table = '`discussions_tree`'; if($_REQUEST["operation"] && strpos($_REQUEST["operation"], "_") !== 0 && method_exists($jstree, $_REQUEST["operation"])) { foreach($_REQUEST as $k => $v) { switch($k) { case 'user_id': //We are passing the user_id from the $_SESSION on each request and trying to pick up the min and max value from the table that matches the 'user_id' $sql = "SELECT max(`right`) , min(`left`) FROM $table WHERE `user_id`=$v"; //If the select does not return any value then just let it be :P if (!list($right, $left)=$dbLink->getRow($sql)) { $sql = $dbLink->dbSubmit("UPDATE $table SET `user_id`=$v WHERE `id` = 1 AND `parent_id` = 0"); $sql = $dbLink->dbSubmit("UPDATE $table SET `user_id`=$v WHERE `parent_id` = 1 AND `label`='How to Tag' "); } else { $sql = $dbLink->dbSubmit("UPDATE $table SET `user_id`=$v, `right`=$right+2 WHERE `id` = 1 AND `parent_id` = 0"); $sql = $dbLink->dbSubmit("UPDATE $table SET `user_id`=$v, `left`=$left+1, `right`=$right+1 WHERE `parent_id` = 1 AND `label`='How to Tag' "); } break; } } header("HTTP/1.0 200 OK"); header('Content-type: application/json; charset=utf-8'); header("Cache-Control: no-cache, must-revalidate"); header("Expires: Mon, 26 Jul 1997 05:00:00 GMT"); header("Pragma: no-cache"); echo $jstree->{$_REQUEST["operation"]}($_REQUEST); die(); } header("HTTP/1.0 404 Not Found"); ?> The problem: DND *(Drag and Drop) works, Delete works, Create works, Rename works, but Copy, Cut and Paste don't work

    Read the article

  • android app doesn't show on the emulator

    - by Anna Finela Constantino
    I made an android application using eclipse and it is working fine when I started developing my app. But then as I continue to develop the app the emulator seems to be not updating the application prior to the changes I have made on the code. So I tried deleting my avd and create a new one every time I run my app, and that seems to have worked. Now my problem is that my emulator doesn't show my app. It says "Failed to install *.apk on device 'emulator-5554': An established connection was aborted by the software in your host machine". I searched for ways to solved it but none of it seems to have worked. I tried killing the adb process (as most my searches would say) on the task manager but still my app doesn't show on the emulator. The emulator is running and all but my icon is nowhere to be found. Am I misssing out something? Is the problem connected to the first problem i had before? As I said, I started developing android app recently, so please bear with me. :) I appreciate all your help.Thanks in advance.

    Read the article

  • Query useing two databases in SQL Report Builder

    - by user912447
    I am new to SQL Server Report Builder 2.0 and I need to compare two different databases in one query. Basically I need to check if values from one database table exist in a different database's table. I know I can add multiple Datasources to my report and access each one with Subreports, but each DataSet that I create can only have one query in it. So how can I go about using one query to access two databases? Or if there is another way to somehow join my results from multiple DataSets, that would work too. Also, the databases are on the same server.

    Read the article

  • CSS3 transition of background-color

    - by jean-guy
    I'm trying to make a transition effect with background-color when hovering menu items but it does not work. Here is my CSS code: #content #nav a:hover { color: black; background-color: #AD310B; /* Firefox */ -moz-transition: all 1s ease-in; /* WebKit */ -webkit-transition: all 1s ease-in; /* Opera */ -o-transition: all 1s ease-in; /* Standard */ transition: all 1s ease-in; } The #nav div is a menu ul list of items. Thank you for your help.

    Read the article

  • Thomson TG585v7 router - promiscuous mode

    - by Nikita
    I have a TG585v7 as a router with several machines plugged into it. In the default setup, the packets are only delivered to the specific machine but I want to be able to setup to monitor all network traffic on one of the machines, i.e. I need those packets to be picked up when my ethernet card is in promiscuous mode. Is this possible? Guide here has this "mcastpromisc Make the IP interface multicast promiscuous. OPTIONAL", is this what I am looking for? Does it mean I need to manually add all my machines by their MAC addresses to be able to receive packets destined for them? Or am I out of luck and I need to get a better router?

    Read the article

< Previous Page | 344 345 346 347 348 349 350 351 352 353 354 355  | Next Page >