Daily Archives

Articles indexed Tuesday March 20 2012

Page 4/20 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Default Save Directory for gnome-screensaver?

  - by trent

  Are there any sort of configuration options for specifying the default save location for gnome-screenshot, or is this hard-coded into the source code? It used to be ~/Desktop, which seems to have changed to ~/Pictures (in 12.04). The only possible solution I've seen is about Setting the default name (as it includes time stamp information now instead of simply Screenshot#), but that solution doesn't really seem ideal to me. Also, this post suggested that the last save location is remembered the next time you take a screenshot, but in my experience, this doesn't seem to be the case. And in any case, following on from that, that entry in gconf-editor doesn't even seem to accurately reflect the last location, so more than likely an entry related to an older version of gnome-screenshot.

  Read the article

• Graphics system failure

  - by anonymous coward

  I just upgraded two versions of Ubuntu to Oneiric after a recent set of updates broke Audacious 2.4.something in Maverick for me. When it was all finished my Asus Eee 1215N with the 1366x768 screen and the notoriously unsupported Nvidia Ion2 Optimus chipset was working on minimum compatibility fallbacks at 1024x768 resolution. So I did a little bit of reading (not enough) and tried deleting a couple parts of the graphics system to see if I could force a retry on the autodetection. The result: No graphical shell works now. Attempted so far: -reinstalling xorg/nouveau, didn't work. -installing bumblebee/nvidia-current, didn't work. -sudo dpkg-reconfigure -phigh -a, didn't work. I'd like to stress that this is otherwise a perfectly functional installation that I had spent some time setting up already (including a successful compile of Audacious 3.21 that was working with all the plugins). Is there a way for me to rebuild the graphics system from scratch or should I just give up, cry a little, backup data, wipe partition and reinstall with a USB drive?

  Read the article

• Where can I find more documentation on bulding an Ubuntu-based cloud infrastructure?

  - by Shazzner

  I've been reading: https://help.ubuntu.com/community/UbuntuCloudInfrastructure It's fascinating stuff, but documentation seems a bit sparse. Where I work, we have this aging, clunky VMWare ESXi setup for all our internal servers. I'd really like to read up on possible migration or just information on Orchestra, integration with Juju, etc that isn't a bunch of loosely connected blog posts. :p This is concerning 11.10 and, presumably, 12.04. To make this less vague, specifically documentation on: Orchestra - features, comparisons, videos, etc Integrating Juju with Orchestra - I'm familiar with using Juju for deploying on AWS, but that wiki page glances over connecting it to orchestra Building a private cloud - Advantages, using/deploying Openstack, etc Working with internal networks - Configuring DMZs, setting rules, etc Any recommended books would be appreciated too. I didn't intend for this to be a 'do all my homework for me! LMGTFY' post, I'm just hungry for information and haven't found a good repository of knowledge for much of this.

  Read the article

• New HP dm4 - No audio on ubuntu 11.10 64bits

  - by Haze1

  I just got a new laptop, HP dm4, and I'm having problems getting the audio to work properly on it. http://www.alsa-project.org/db/?f=7b697a35465a9f7236fb94deb9ff97fa65e55489 I tried to edit /etc/modprobe.d/alsa-base.conf and added: option snd-hda-intel model=ref this caused the audio to work, but it's muffled. I'm wondering if anybody knows what would be the correct options to get this POS to work. Thanks in advance

  Read the article

• Cannot log in to the desktop on ubuntu 11.10?

  - by Jichao

  The problem is, I could log in under the terminal, i could ifup eth0, i could do anything I want in the terminal, but if I use ctrl+alt+f7 goto the gnome login screen, after I input the correct password, the system just send me back to same login screen again. I have created a new user, but it didn't work. I have change all the files under ~/ to jichao:jichao(which is my username) with chown -hR jichao:jichao /home/jichao, but it didn't work too. I searched the internet, somebody said I should see the logs under /var/log/gdm, but there is not a /var/log/gdm directory in my box. Here are the tail of files under /var/log/ tail X.org.log [ 3263.348] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 3263.348] (**) Dell Dell USB Keyboard: always reports core events [ 3263.348] (**) Dell Dell USB Keyboard: Device: "/dev/input/event5" [ 3263.348] (--) Dell Dell USB Keyboard: Found keys [ 3263.348] (II) Dell Dell USB Keyboard: Configuring as keyboard [ 3263.348] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input29/event5" [ 3263.348] (II) XINPUT: Adding extended input device "Dell Dell USB Keyboard" (type: KEYBOARD) [ 3263.348] (**) Option "xkb_rules" "evdev" [ 3263.348] (**) Option "xkb_model" "pc105" [ 3263.348] (**) Option "xkb_layout" "us" kern.log Mar 20 09:32:58 jichao-MS-730 kernel: [ 3182.701247] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input27 Mar 20 09:32:58 jichao-MS-730 kernel: [ 3182.701392] generic-usb 0003:413C:2003.0018: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-1.4/input0 Mar 20 09:33:02 jichao-MS-730 kernel: [ 3186.642572] usb 2-1.3: new low speed USB device number 17 using ehci_hcd Mar 20 09:33:02 jichao-MS-730 kernel: [ 3186.741892] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input28 Mar 20 09:33:02 jichao-MS-730 kernel: [ 3186.742080] generic-usb 0003:045E:0047.0019: input,hidraw2: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.0-1.3/input0 Mar 20 09:33:27 jichao-MS-730 kernel: [ 3212.473901] usb 2-1.3: USB disconnect, device number 17 Mar 20 09:33:28 jichao-MS-730 kernel: [ 3212.702031] usb 2-1.4: USB disconnect, device number 16 Mar 20 09:34:08 jichao-MS-730 kernel: [ 3253.022655] usb 2-1.4: new low speed USB device number 18 using ehci_hcd Mar 20 09:34:08 jichao-MS-730 kernel: [ 3253.124278] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input29 Mar 20 09:34:08 jichao-MS-730 kernel: [ 3253.124423] generic-usb 0003:413C:2003.001A: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-1.4/input0 Mar 20 09:33:02 jichao-MS-730 kernel: [ 3186.741892] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input28 Mar 20 09:33:02 jichao-MS-730 kernel: [ 3186.742080] generic-usb 0003:045E:0047.0019: input,hidraw2: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.0-1.3/input0 syslog Mar 20 09:33:02 jichao-MS-730 mtp-probe: bus: 2, device: 17 was not an MTP device Mar 20 09:33:27 jichao-MS-730 kernel: [ 3212.473901] usb 2-1.3: USB disconnect, device number 17 Mar 20 09:33:28 jichao-MS-730 kernel: [ 3212.702031] usb 2-1.4: USB disconnect, device number 16 Mar 20 09:34:08 jichao-MS-730 kernel: [ 3253.022655] usb 2-1.4: new low speed USB device number 18 using ehci_hcd Mar 20 09:34:08 jichao-MS-730 mtp-probe: checking bus 2, device 18: "/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4" Mar 20 09:34:08 jichao-MS-730 mtp-probe: bus: 2, device: 18 was not an MTP device Mar 20 09:34:08 jichao-MS-730 kernel: [ 3253.124278] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input29 Mar 20 09:34:08 jichao-MS-730 kernel: [ 3253.124423] generic-usb 0003:413C:2003.001A: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-1.4/input0 auth.log Mar 20 09:18:52 jichao-MS-730 lightdm: pam_ck_connector(lightdm-autologin:session): nox11 mode, ignoring PAM_TTY :0 Mar 20 09:18:53 jichao-MS-730 lightdm: pam_succeed_if(lightdm:auth): requirement "user ingroup nopasswdlogin" not met by user "jichao" Mar 20 09:18:53 jichao-MS-730 dbus[835]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.240" (uid=104 pid=6457 comm="/usr/lib/indicator-datetime/indicator-datetime-ser") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.11" (uid=0 pid=1156 comm="/usr/sbin/console-kit-daemon --no-daemon ") Mar 20 09:19:38 jichao-MS-730 sudo: jichao : TTY=tty6 ; PWD=/home ; USER=root ; COMMAND=/bin/chown -hR jichao:jichao jicha Mar 20 09:19:39 jichao-MS-730 sudo: jichao : TTY=tty6 ; PWD=/home ; USER=root ; COMMAND=/bin/chown -hR jichao:jichao jichao Mar 20 09:20:10 jichao-MS-730 lightdm: pam_unix(lightdm-autologin:session): session closed for user lightdm Mar 20 09:20:11 jichao-MS-730 lightdm: pam_unix(lightdm-autologin:session): session opened for user lightdm by (uid=0) Mar 20 09:20:11 jichao-MS-730 lightdm: pam_ck_connector(lightdm-autologin:session): nox11 mode, ignoring PAM_TTY :0 Mar 20 09:20:12 jichao-MS-730 lightdm: pam_succeed_if(lightdm:auth): requirement "user ingroup nopasswdlogin" not met by user "jichao" Mar 20 09:20:12 jichao-MS-730 dbus[835]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.247" (uid=104 pid=6572 comm="/usr/lib/indicator-datetime/indicator-datetime-ser") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.11" (uid=0 pid=1156 comm="/usr/sbin/console-kit-daemon --no-daemon ") It seems that my .xsession-errors does not grow since yesterday. Here is my .xsession-error: (gnome-settings-daemon:1550): Gdk-WARNING **: The program 'gnome-settings-daemon' received an X Window System error. This probably reflects a bug in the program. The error was 'BadWindow (invalid Window parameter)'. (Details: serial 26702 error_code 3 request_code 2 minor_code 0) (Note to programmers: normally, X errors are reported asynchronously; that is, you will receive the error a while after causing it. To debug your program, run it with the --sync command line option to change this behavior. You can then get a meaningful backtrace from your debugger if you break on the gdk_x_error() function.) (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed WARN 2012-03-17 19:28:46 glib <unknown>:0 Unable to fetch children: Method "Children" with signature "" on interface "org.ayatana.bamf.view" doesn't exist WARN 2012-03-17 19:28:46 glib <unknown>:0 Unable to fetch children: Method "Children" with signature "" on interface "org.ayatana.bamf.view" doesn't exist (yunio:2430): Gtk-WARNING **: ??????????????:“pixmap”, (yunio:2430): Gtk-WARNING **: ??????????????:“pixmap”, (polkit-gnome-authentication-agent-1:1601): Gtk-WARNING **: ??????????????:“pixmap”, (yunio:2430): Gtk-WARNING **: ??????????????:“pixmap”, (yunio:2430): Gtk-WARNING **: ??????????????:“pixmap”, (polkit-gnome-authentication-agent-1:1601): Gtk-WARNING **: ??????????????:“pixmap”, (polkit-gnome-authentication-agent-1:1601): Gtk-WARNING **: ??????????????:“pixmap”, (polkit-gnome-authentication-agent-1:1601): Gtk-WARNING **: ??????????????:“pixmap”, /usr/share/system-config-printer/applet.py:336: GtkWarning: ??????????????:“pixmap”, self.loop.run () (unity-window-decorator:1652): Gtk-WARNING **: ??????????????:“pixmap”, (unity-window-decorator:1652): Gtk-WARNING **: ??????????????:“pixmap”, (unity-window-decorator:1652): Gtk-WARNING **: ??????????????:“pixmap”, (unity-window-decorator:1652): Gtk-WARNING **: ??????????????:“pixmap”, common-plugin-Message: checking whether we have a device for 4: yes common-plugin-Message: checking whether we have a device for 5: yes common-plugin-Message: checking whether we have a device for 6: yes common-plugin-Message: checking whether we have a device for 7: yes common-plugin-Message: checking whether we have a device for 10: yes common-plugin-Message: checking whether we have a device for 8: yes common-plugin-Message: checking whether we have a device for 9: yes (gnome-settings-daemon:13791): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed [1331983727,000,xklavier.c:xkl_engine_start_listen/] The backend does not require manual layout management - but it is provided by the application ** (gnome-fallback-mount-helper:1584): DEBUG: ConsoleKit session is active 0 (gnome-fallback-mount-helper:1584): Gdk-WARNING **: gnome-fallback-mount-helper: Fatal IO error 11 (???????) on X server :0. (gdu-notification-daemon:1708): Gdk-WARNING **: gdu-notification-daemon: Fatal IO error 11 (???????) on X server :0. unity-window-decorator: Fatal IO error 11 (???????) on X server :0.0. (bluetooth-applet:1583): Gdk-WARNING **: bluetooth-applet: Fatal IO error 11 (???????) on X server :0. (nm-applet:1596): Gdk-WARNING **: nm-applet: Fatal IO error 11 (???????) on X server :0. (nautilus:3106): IBUS-WARNING **: _connection_closed_cb: Underlying GIOStream returned 0 bytes on an async read (update-notifier:1821): Gdk-WARNING **: update-notifier: Fatal IO error 11 (???????) on X server :0. applet.py: Fatal IO error 11 (???????) on X server :0. (nautilus:3106): Gdk-WARNING **: nautilus: Fatal IO error 11 (???????) on X server :0. Could you help me, Thanks.

  Read the article

• kubuntu muon package manager stop working

  - by aseed

  i have kubuntu today after updating the muon package manager stuck at 64% so i closes it. and after that when i try to update or reinstall or install software the manger stuck. so how can i reinstall the muon package manger from terminal?? i try sudo apt-get install muon and i get this messege Reading package lists... Done Building dependency tree Reading state information... Done muon is already the newest version. You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies: libopencv-dev : Depends: libopencv-core-dev (= 2.3.1-4ppa1) but it is not going to be installed Depends: libopencv-ml-dev (= 2.3.1-4ppa1) but it is not going to be installed Depends: libopencv-imgproc-dev (= 2.3.1-4ppa1) but it is not going to be installed Depends: libopencv-video-dev (= 2.3.1-4ppa1) but it is not going to be installed Depends: libopencv-objdetect-dev (= 2.3.1-4ppa1) but it is not going to be installed Depends: libopencv-gpu-dev (= 2.3.1-4ppa1) but it is not going to be installed Depends: libopencv-highgui-dev (= 2.3.1-4ppa1) but it is not going to be installed Depends: libopencv-calib3d-dev (= 2.3.1-4ppa1) but it is not going to be installed Depends: libopencv-flann-dev (= 2.3.1-4ppa1) but it is not going to be installed Depends: libopencv-features2d-dev (= 2.3.1-4ppa1) but it is not going to be installed Depends: libopencv-legacy-dev (= 2.3.1-4ppa1) but it is not going to be installed Depends: libopencv-contrib-dev (= 2.3.1-4ppa1) but it is not going to be installed E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). so what to do, i need to reinstall it because it not working ~$ sudo dpkg --configure -a dpkg: dependency problems prevent configuration of libopencv-dev: libopencv-dev depends on libopencv-core-dev (= 2.3.1-4ppa1); however: Package libopencv-core-dev is not installed. libopencv-dev depends on libopencv-ml-dev (= 2.3.1-4ppa1); however: Package libopencv-ml-dev is not installed. libopencv-dev depends on libopencv-imgproc-dev (= 2.3.1-4ppa1); however: Package libopencv-imgproc-dev is not installed. libopencv-dev depends on libopencv-video-dev (= 2.3.1-4ppa1); however: Package libopencv-video-dev is not installed. libopencv-dev depends on libopencv-objdetect-dev (= 2.3.1-4ppa1); however: Package libopencv-objdetect-dev is not installed. libopencv-dev depends on libopencv-gpu-dev (= 2.3.1-4ppa1); however: Package libopencv-gpu-dev is not installed. libopencv-dev depends on libopencv-highgui-dev (= 2.3.1-4ppa1); however: Package libopencv-highgui-dev is not installed. libopencv-dev depends on libopencv-calib3d-dev (= 2.3.1-4ppa1); however: Package libopencv-calib3d-dev is not installed. libopencv-dev depends on libopencv-flann-dev (= 2.3.1-4ppa1); however: Package libopencv-flann-dev is not installed. libopencv-dev depends on libopencv-features2d-dev (= 2.3.1-4ppa1); however: Package libopencv-features2d-dev is not installed. libopencv-dev depends on libopencv-legacy-dev (= 2.3.1-4ppa1); however: Package libopencv-legacy-dev is not installed. libopencv-dev depends on libopencv-contrib-dev (= 2.3.1-4ppa1); however: Package libopencv-contrib-dev is not installed. dpkg: error processing libopencv-dev (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: libopencv-dev sudo apt-get install -f sudo dpkg --configure -a and still same problem... and i think getting this problem because of updating kubuntu today

  Read the article

• Can't enable wireless lan on Fujitsu Siemens A1665G with Ubuntu 11.10 installed

  - by Theo

  I saw my old Notebook yesterday and wanted to make that work again. On Windows XP the wireless worked still fine. Then I installed new Ubuntu 11.10 32bit and I'm sadly not able to make the wireless enabled. [I replaced Win XP entirely] lspci lists following network: 08:0a.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02) So after recommendation from this link I installed the b43 firmware module. iwconfig prints the following: wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associatd Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Power Management: off As you can see, my wireless lan adapter is not turned on. sudo iwconfig wlan0 txpower auto Doesn't change anything. Then I tried to make it work with rfkill. rfkill list 0: phy0: Wirless LAN Soft blocked: no Hard blocked: yes sudo rfkill unblock all rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes remains the same. The question is now, how I could enable the hard blocked wireless LAN. There is no hardware switch for wlan integrated. However there is a button to change the state. I always thought this would be software sided, but it seems to make some hardware changes as well... The wireless LED is also not blinking (as it did on windows xp) I reset bios and searched for some settings in there, but it has only a few options and nothing to do with wireless settings, nothing works here.. At last I tried to install the acer hotkeys but I was not able to manage that. I installed the acerhkgui package, but in initializing progress, it was not able to compile acer hotkeys for my machine. There was a message that asm/linkage.h was not found while compiling. Do you have any ideas what I could do to make this hard blocked stuff disabled and my wireless card work? PS: I also tried sudo rm /dev/rfkill and a reboot to reinit that stuff... No success :(

  Read the article

• Wired Connection shared with other computers connects then disconnects in 11.10 nm-applet

  - by approbatory

  connecting with shared with other computers connection in NetworkManager. Other computer gets IP but NetworkManager disconnects the shared connection after half a second. This same setup worked perfectly fine in 11.04. Is there any fix, workaround or alternative way to share a connection with another computer over an Ethernet cable. (I can downgrade to 11.04 but I'd rather not ). EDIT: found a workaround The workaround for now is to set IPv6 options to Ignore and then sudo killall dnsmasq. Reconnect and it should work.

  Read the article

• Benq 5000 Scanner Not Working

  - by One Zero

  My scanner is detected but its not working Scanner BENQ 5000 lsusb root@onezero:/home/one# lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 093a:2700 Pixart Imaging, Inc. Bus 005 Device 003: ID 04a5:20f8 Acer Peripherals Inc. (now BenQ Corp.) Benq 5000 How do make it Work

  Read the article

• Don't list all users at login with LightDM

  - by Bryan

  I just upgraded to Ubuntu 11.10 and I was wondering if it's possible to not list all the current users and instead require the user to type in their username? My company's IT policies require that users not be listed on login screens. In Ubuntu 11.04, I was able to do this with the following commands... $ sudo -u gdm gconftool-2 --type boolean --set /apps/gdm/simple-greeter/disable_user_list true

  Read the article

• PHP not working with hosting

  - by Richard

  I have been playing with a php CMS site for someone that I am ready to deploy but am running into a couple problems that I assume to be hosting related. I have been developing and playing with it localy and deploying to a hosting environment friendly towards this specific CMS (joomla). I have recently been trying to deploy to a client's hosting and have been running in to some trouble. Any help would be greatly appreciated. I have been in contact with the clients hosting and have had them set up a mysql DB for me and enable php. Simple php was working but joomla was not able to create the config files it needed to run on this hosting. Therefore I havnt been able to successfully deploy my work. While playing around with some simple php pages I have started getting http 500 errors and now cant seem to get anywhere. This is a smaller hosting company that seems willing to work with me but I dont really know what i need to ask from them to get me working. My questions to you webmaster geniuses would be as follows: Given the situation I have described, is there anything specifically i should do to get my joomla/php site running on this hosting? What specifically should I ask my current hosting providers to do to help me get working? Thanks

  Read the article

• Attracting publishers to an in-house affiliate program

  - by Steve

  The cost to enter affiliate networks can be prohibitive for (cash-strapped) small business, particularly if they are simply testing the waters of an affiliate program. If such a company wanted to run an affiliate program in-house using off the shelf software, what methods would they use to attract publishers? Is it simply a case of SEO or SEM, attempting to attract publishers to the page on their website which outlines their affiliate program? Are there directories to submit one's affiliate program to?

  Read the article

• Huge difference between Facebook Ad Click figures and Apache log requests

  - by Gearóid

  We're running a facebook ad campaign for our business but there seems to be a huge discrepancy between the number of clicks registered and the number of requests made with "facebook.com" in the HTTP referrer. The difference can be anything between 40-80 clicks/requests. I understand why the Google Analytics would be off and I understand that the figures shouldnt be exactly the same but surely if 100 people click the ad then I should be seeing at least 90 requests for the homepage with facebook.com as the referrer? Can anybody provide any insight into why this may be happening?

  Read the article

• Rotate Rigged and Animated Scene?

  - by Nick

  I have a rigged and animated mesh that I need to import into Unity. We several characters that all use the same script, and access their bones to do procedural animations as well. The problem is that the new model I was given is facing the wrong way. Instead of facing forward, the model is facing the right.. Is there any way to rotate the model with it's animations without screwing it up, so that it will import properly in unity facing forward? Because of the way it was done, selecting everything in the scene and just rotating it by 90 degrees ruins some of the animations, so I need a program that can fix this.

  Read the article

• Creating natural environments that can run on lower end computers in Unity3D/C#

  - by Timothy Williams

  So, I'm starting work on a project soon that will require me to create realistic environments that can preferably run on PC's besides high quality ones. The goal is to get as real an environment as possible while still being easy(ish) to run. The only problem is I've NEVER done anything with 3D environments, making trees sway, grass move, lighting, etc. Can anyone give me any help? Perhaps describe how it's done? Link me to articles? I'm just looking to be pointed in the right direction, not for you to write the code for me. Any help at all would be greatly appreciated, I'm using Unity3D and C# as my language. Thanks, Tim.

  Read the article

• Is it possible to overlay EditText box on a GLSurfaceView on Android?

  - by Ash McConnell

  I am trying to add a "PlayerName" box on top of a opengl menu background, is this possible? I've tried various layouts, but they don't seem to allow an EditText box to appear on top What is the typical way of doing something like this? Do I need to manually render the text and handle input or is there a better way? It seems like it should be possible to show the EditText on top of the GLSurfaceView somehow.

  Read the article

• Is there a pedagogical game engine?

  - by K.G.

  I'm looking for a book, website, or other resource that gives modern 3D game engines the same treatment as Operating Systems: Design and Implementation gave operating systems. I have read Jason Gregory's Game Engine Architecture, which I enjoyed. However, by intent the author treated components of the architecture as atomic units, whereas what I'm interested in is the plumbing between those units that makes a coherent whole out of ideally loosely coupled parts. In books such as these, one usually reads that "that's academic," but that's the point! I have also read Julian Gold's Object-oriented Game Development, which likewise was good, but I feel is beginning to show its age. Since even mobile platforms these days are multicore and have fast video memory, those kinds of things (concurrency, display item buffering) would ideally be covered. There are other resources, such as the Doom 3 source code, which is highly instructive for its being a shipped product. The problem with those is as follows: float Q_rsqrt( float number ) { long i; float x2, y; const float threehalfs = 1.5F; x2 = number * 0.5F; y = number; i = * ( long * ) &y; // evil floating point bit level hacking i = 0x5f3759df - ( i >> 1 ); // what the f***? y = * ( float * ) &i; y = y * ( threehalfs - ( x2 * y * y ) ); // 1st iteration // y = y * ( threehalfs - ( x2 * y * y ) ); // 2nd iteration, this can be removed return y; } To wit, while brilliant, this kind of source requires more enlightenment than I can usually muster upon first read. In summary, here's my white whale: For an adult reader with experience in programming. I wish I could save all the trees killed by every. Single. Game Programming book ever devoting the first two chapters to "Now just what is a variable anyway?" In C or C++, very preferably C++. Languages that are more concise are fantastic for teaching, except for when what you want to learn is how to cope with a verbose language. There is also the benefit of the guardrails that C++ doesn't provide, such as garbage collection. Platform agnostic. I'm sincerely afraid that this book is out there and it's Visual C++/DirectX oriented. I'm a Linux guy, and I'd do what it takes, but I would very much like to be able to use OpenGL. Thanks for everything! Before anyone gets on my case about it, Fast inverse square root was from Quake III Arena, not Doom 3!

  Read the article

• GameState management hierarchical FSM vs stack based FSM

  - by user8363

  I'm reading a bit on Finite State Machines to handle game states (or screens). I would like to build a rather decent FSM that can handle multiple screens. e.g. while the game is running I want to be able to pop-up an ingame menu and when that happens the main screen must stop updating (the game is paused) but must still be visible in the background. However when I open an inventory pop-up the main screen must be visible and continue updating etc. I'm a bit confused about the difference in implementation and functionality between hierarchical FSM's and FSM's that handle a stack of states instead. Are they basically the same? Or are there important differences?

  Read the article

• For normal mapping, why can we not simply add the tangent normal to the surface normal?

  - by sebf

  I am looking at implementing bump mapping (which in all implementations I have seen is really normal mapping), and so far all I have read says that to do this, we create a matrix to convert from world-space to tangent-space, in order to transform the lights and eye direction vectors into tangent space, so that the vectors from the normal map may be used directly in place of those passed through from the vertex shader. What I do not understand though, is why we cannot just use the normalised sum of the sampled-normal vector, and the surface-normal? (assuming we already transform and pass through the surface normal for the existing lighting functions) Take the diagram below; the normal is simply the deviation from the 'reference normal' for any given coordinate system, correct? And transforming the surface normal of a mapped surface from world space to tangent space makes it equivalent to the tangent space 'reference normal', no? If so, why do we transform all lighting vectors into tangent space, instead of simply transforming the sampled tangent once in the pixel shader?

  Read the article

• Jumping a sprite while moving in a Bezier action

  - by marcg11

  I'm creating a game and I need the sprite to jump (move up and down basically) while it's moving on a bezier path so it moves vertically while it still follows the path. If I do this while it's moving along the bezier path: [mySprite runAction:[CCJumpBy actionWithDuration:0.1 position:ccp(0,0) height:10 jumps:1]]; It jumps vertically but instantly it returns to the position on the path. What I want is to jump relative to the path. Anyone knows something about it? It would looks something like this: the curve is a sequence of CCBezierBy's by the way. Thanks.

  Read the article

• How do I use setFilmSize in panda3d to achieve the correct view?

  - by lhk

  I'm working with Panda3d and recently switched my game to isometric rendering. I moved the virtual camera accordingly and set an orthographic lens. Then I implemented the classes "Map" and "Canvas". A canvas is a dynamically generated mesh: a flat quad. I'm using it to render the ingame graphics. Since the game itself is still set in a 3d coordinate system I'm planning to rely on these canvases to draw sprites. I could have named this class "Tile" but as I'd like to use it for non-tile sketches (enemies, environment) as well I thought canvas would describe it's function better. Map does exactly what it's name suggests. Its constructor receives the number of rows and columns and then creates a standard isometric map. It uses the canvas class for tiles. I'm planning to write a map importer that reads a file to create maps on the fly. Here's the canvas implementation: class Canvas: def __init__(self, texture, vertical=False, width=1,height=1): # create the mesh format=GeomVertexFormat.getV3t2() format = GeomVertexFormat.registerFormat(format) vdata=GeomVertexData("node-vertices", format, Geom.UHStatic) vertex = GeomVertexWriter(vdata, 'vertex') texcoord = GeomVertexWriter(vdata, 'texcoord') # add the vertices for a flat quad vertex.addData3f(1, 0, 0) texcoord.addData2f(1, 0) vertex.addData3f(1, 1, 0) texcoord.addData2f(1, 1) vertex.addData3f(0, 1, 0) texcoord.addData2f(0, 1) vertex.addData3f(0, 0, 0) texcoord.addData2f(0, 0) prim = GeomTriangles(Geom.UHStatic) prim.addVertices(0, 1, 2) prim.addVertices(2, 3, 0) self.geom = Geom(vdata) self.geom.addPrimitive(prim) self.node = GeomNode('node') self.node.addGeom(self.geom) # this is the handle for the canvas self.nodePath=NodePath(self.node) self.nodePath.setSx(width) self.nodePath.setSy(height) if vertical: self.nodePath.setP(90) # the most important part: "Drawing" the image self.texture=loader.loadTexture(""+texture+".png") self.nodePath.setTexture(self.texture) Now the code for the Map class class Map: def __init__(self,rows,columns,size): self.grid=[] for i in range(rows): self.grid.append([]) for j in range(columns): # create a canvas for the tile. For testing the texture is preset tile=Canvas(texture="../assets/textures/flat_concrete",width=size,height=size) x=(i-1)*size y=(j-1)*size # set the tile up for rendering tile.nodePath.reparentTo(render) tile.nodePath.setX(x) tile.nodePath.setY(y) # and store it for later access self.grid[i].append(tile) And finally the usage def loadMap(self): self.map=Map(10, 10, 1) this function is called within the constructor of the World class. The instantiation of world is the entry point to the execution. The code is pretty straightforward and runs good. Sadly the output is not as expected: Please note: The problem is not the white rectangle, it's my player object. The problem is that although the map should have equal width and height it's stretched weirdly. With orthographic rendering I expected the map to be a perfect square. What did I do wrong ? UPDATE: I've changed the viewport. This is how I set up the orthographic camera: lens = OrthographicLens() lens.setFilmSize(40, 20) base.cam.node().setLens(lens) You can change the "aspect" by modifying the parameters of setFilmSize. I don't know exactly how they are related to window size and screen resolution but after testing a little the values above seem to work for me. Now everything is rendered correctly as long as I don't resize the window. Every change of the window's size as well as switching to fullscreen destroys the correct rendering. I know that implementing a listener for resize events is not in the scope of this question. However I wonder why I need to make the Film's height two times bigger than its width. My window is quadratic ! Can you tell me how to find out correct setting for the FilmSize ? UPDATE 2: I can imagine that it's hard to envision the behaviour of the game. At first glance the obvious solution is to pass the window's width and height in pixels to setFilmSize. There are two problems with that approach. The parameters for setFilmSize are ingame units. You'll get a way to big view if you pass the pixel size For some strange reason the image is distorted if you pass equal values for width and height. Here's the output for setFilmSize(800,800) You'll have to stress your eyes but you'll see what I mean

  Read the article

• Mysql concurrency: what happens if a locked table is accessed?

  - by PixelSapiens

  the question is rather simple but I couldn't find a precise answer: in a myisam db, what happens if a php file locks a table (with an atomic operation, say an INSERT) and another php file tries to access the same table (reading or writing)? Now, while it is obvious that the second session will not be able to access the table, what exactly happens? Does it return some kind of error? Does is wait in queue until it is able to access it? Thanks in advance!

  Read the article

• How to use #ifdef entities as part of functions in header files

  - by Crazyjavahacking

  I would like to ask if it is possible to use the entities defined in #ifdef block in header files. To be clear, I have following code: #ifdef #include <winsock2.h> #define SOCKET_HANDLE SOCKET #define CONNECTION_HANDLE SOCKET #endif SOCKET_HANDLE createServerSocket(const char* hostAddress, short port); I am Java developer and this seems completely fine for me. However compiler has a problem with this. Can you explain why is that code a problem? Also how can I force to compile it. (The idea is to have generic interface and conditional compilation to determine real types according to running platform at compile time.) Thanks

  Read the article

• DataSource or ConnectionPoolDataSource for Application Server JDBC resources

  - by Vinnie

  When creating JNDI JDBC connection pools in an application server, I always specified the type as javax.sql.ConnectionPoolDataSource. I never really gave it too much thought as it always seemed natural to prefer pooled connections over non-pooled. However, in looking at some examples (specifically for Tomcat) I noticed that they specify javax.sql.DataSource. Further, it seems there are settings for maxIdle and maxWait giving the impression that these connections are pooled as well. Glassfish also allows these parameters regardless of the type of data source selected. Are javax.sql.DataSource pooled in an application server (or servlet container)? What (if any) advantages are there for choosing javax.sql.ConnectionPoolDataSource over javax.sql.DataSource (or vice versa)?

  Read the article

• Caching result of SELECT statement for reuse in multiple queries

  - by Andrew

  I have a reasonably complex query to extract the Id field of the results I am interested in based on parameters entered by the user. After extracting the relevant Ids I am using the resulting set of Ids several times, in separate queries, to extract the actual output record sets I want (by joining to other tables, using aggregate functions, etc). I would like to avoid running the initial query separately for every set of results I want to return. I imagine my situation is a common pattern so I am interested in what the best approach is. The database is in MS SQL Server and I am using .NET 3.5.

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >