Monthly Archives

Articles indexed in September 2012

Page 416/470 | < Previous Page | 412 413 414 415 416 417 418 419 420 421 422 423  | Next Page >

• Applications Deployment with MDT

  - by beakersoft

  I have added a install for Silver light to my MDT server, so it can get installed when the image gets deployed. When I boot them machines it is asking me to install the applications, how can i get it to auto install the apps without prompting. I have added this line to the rules - I thought that would but seems to make no difference. I'm sure i must have missed something somewhere? Cheers Luke

  Read the article

• nginx configuration file explained

  - by Chris Muench

  I have a few questions about this configuration file "default" in /etc/nginx/sites-enabled. It is shown below. server { root /usr/share/nginx/www; index index.html index.htm; # Make site accessible from http://localhost/ server_name localhost; location / { proxy_pass http://127.0.0.1:8080; } location /doc { root /usr/share; autoindex on; allow 127.0.0.1; deny all; } location /images { root /usr/share; autoindex off; } } There is no "Listen" directive, how does it know to default to 80 The server_name is localhost, how does another domain work? Why is the location directive embedded in the server directive? Does that mean these locations ONLY apply to this server? None of my configs have listen 80 default_server; how does nginx then pick what configuration to use?

  Read the article

• CentOS PAM+LDAP login and host attribute

  - by pianisteg

  My system is CentOS 6.3, openldap is configured well, PAM authorization works fine. But after turning pam_check_host_attr to yes, all LDAP-auths fail with message "Access denied for this host". hostname on the server returns correct value, the same value is listed in user's profile. "pam_check_host_attr no" works fine and allows everyone with correct uid/password a piece of /var/log/secure: Sep 26 05:33:01 ldap sshd[1588]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=my-host user=my-username Sep 26 05:33:01 ldap sshd[1588]: Failed password for my-username from 77.AA.BB.CC port 58528 ssh2 Sep 26 05:33:01 ldap sshd[1589]: fatal: Access denied for user my-username by PAM account configuration Another two servers (CentOS 5.7 Debian) authorizes on this LDAP server correctly. Even with pam_check_host_attr yes! I didn't edit /etc/security/access.conf, it is empty, only default comments. I don't know what to do! How to fix this?

  Read the article

• Force .js files saved in ANSI encoding to show in UTF-8 on IIS 7.5

  - by Xcarpa

  I'm migrating a web system that now works on windows server 2003 IIS 6, to IIS 7.5 on windows 2008 server This system generates javascript files with accented characters in ANSI (Portuguese - Brazil). These javascripts shows for example alert messages. In IIS 6 I have no problem with that, but now using IIS 7.5 if those files are not in UTF-8, the accented characters do not appear correctly. Do we have any way to force these files, even in ANSI, to be processed by IIS 7.5 as UTF-8 ? Thank you ! Cheers Xcarpa

  Read the article

• Get SMTP to work

  - by user664408

  We upgraded to exchange 2010 and this broke an old java based script that connected and sent out e-mail messages. Many hours later we still can't get exchange to work like exchange 2003 did. That hope was abandoned and we decided to create a linux postfix server to forward the e-mail from the old system to exchange, eliminating exchange on the java side. This still doesn't work with similar errors. I need help figuring out what is different between exchange 2003 with SSL and authentication and the new servers, both linux and exchange 2010. My guess is both have TLS and for some reason the java code won't revert back to the older version of SSL, instead it just fails. Can someone help me either setup exchange 2010 to work like 2003 used to, OR to setup postfix to mandate it use SSL 2.0 instead of TLS? unfortunately no one knows anything about the Java code and they can't decompile it apparently. Any help is appreciated.

  Read the article

• domain screensaver control software

  - by Pec

  I'm looking to buy a screensaver control product with granular control. I have about 2000 workstations which require dozens of different timeout values, lock/not locked on resume settings, different screen saver files (that can be frequently updated depending on department), etc. It's looking to be quite an undertaking accomplishing this with domain group policies so I'm hoping you guys have some suggestions of products to use. Hopefully such products would integrate with AD. Thanks

  Read the article

• HTTP Proxypass of subdomain

  - by enedebe

  I'm trying to install a proxy on my gateway that everything that comes from a subdomain for example sub.mydomain.com goes to an inside server at a :3000 port. I'm installing a redmine server inside my network that has to be reached from outside. Any idea of how to do that? I think in httpd as proxypass, but I don't know how to get just the subdomain name to proxy it. My gateway is currently Clearos machine. Thanks

  Read the article

• Juniper SRX1400 VPN

  - by ank

  I have been trying to set up a client VPN on a Juniper SRX1400 without much success. All documentation I found from Juniper and elsewhere does a lot of other (difficult and wonderful) things other than the simple things I want to do. We already have a VPN running on CISCO PIX hardware which we need to put to rest and we pretty much like to replicate the functionality, which is: 1) client makes a request to the outside interface of the SRX1400, 2) client gets authenticated, 3) if successful, then client is assigned all the usual DHCP stuff and becomes part of the network. What privileges this DHCP assigned network has, should be configurable of course with the usual routing/filtering methods. Am I asking for too much from the SRX for this kind of thing? Should I ditch the SRX for VPN and revert to an OpenVPN solution that I had working some time back also and was amazed at the ease of configuration, functionality and features?

  Read the article

• SBS 2003 CEICW - Multiple IP's causing error

  - by mushmush

  two IP adresses (different subnets) are assigned to one networkcard. In the Properties window the order is right, however the Server always picks the wrong one as the "default ip". This causes CEICW to fail with an "The DHCP Server service is started, but the DHCP scope does not match the network address of the server's local area network (LAN) adapter." error. The DHCP Server is installed and configured, but not for the other subnet as it is not needed. If i remove the other subnets IP everything works fine. Is there any way around that without temporarily removing the IP adress or configuring DHCP for one more Subnet?

  Read the article

• Freebsd jail for an small company - checklist - what shouldn't forget

  - by cajwine

  Looking for an checklist for an "small company freebsd/jail server". Having pretty common starting point: FreeBSD jail (remote/headless) for the company: public web, email, ftp server, and private (maybe in the future partially public) wiki (foswiki) 4 physical persons, (6 email addresses) + one admin - others will never use ssh) have already done usual hardening on the host side (like pf, sshguard etc). my major components are: dovecot, exim, apache22, proftpd, perl5.14. Looking for an checklist, what I shouldn't forget. My plan: openssl self-signed certificates for exim, dovecot and proftpd (wildcard keys) openssl self-signed certificate for apache (later will go for "trusted-signed" key) My questions are: is is an "good practice" having one pair of wildcard SSL-certificates for many programs? (exim, dovecot, proftpd) - or should I generate one key for each service? should I add all 4 persons as standard (unix) users, or I should go with virtual users? Asking because: have only small count of users, and it is more simple to configure everything (exim, dovecot) for local users ($HOME/Maildir), plus ability to set $HOME/.forward/vacation and etc. is here some (special) things what I should consider? (e.g. maybe, in the future we want setup our own webmail - will make this any difference?) any other recommendation? Thank you, hoping that this question fit into the http://serverfault.com/faq under the: Server and Business Workstation operating systems, hardware, software Operations, maintenance, and monitoring Looking for an checklist, but please explain why you're recommending it. See Good Subjective, Bad Subjective. related: What's your suggested mail server configuration for a FreeBSD server?

  Read the article

• Nagios Apache Config with PHP-FPM downloading cgi files

  - by tubaguy50035

  I'm trying to setup Nagios 3 under Apache 2.4 with PHP-FPM. I've run into a couple problems I could use help with. The PHP side of things seems to be working, I can see the home page and the sidebar. But all of the CGI files are downloading instead of executing, and when I try to click on "Read What's New In Nagios Core 3", I get an error /nagios3/docs/whatsnew.html was not found on this server. Below is my vhost config for Nagios. <VirtualHost *:300> # apache configuration for nagios 3.x ScriptAlias /cgi-bin/nagios3 /usr/lib/cgi-bin/nagios3 ScriptAlias /nagios3/cgi-bin /usr/lib/cgi-bin/nagios3 # Where the stylesheets (config files) reside Alias /nagios3/stylesheets /etc/nagios3/stylesheets # Where the HTML pages live Alias /nagios3 /usr/share/nagios3/htdocs ProxyPassMatch ^/(.*\.php)$ fcgi://127.0.0.1:9001/usr/share/nagios3/htdocs/$1 <DirectoryMatch (/usr/share/nagios3/htdocs|/usr/lib/cgi-bin/nagios3|/etc/nagios3/stylesheets)> Options FollowSymLinks ExecCGI AllowOverride AuthConfig Order Allow,Deny Allow From All AuthName "Nagios Access" AuthType Basic AuthUserFile /etc/nagios3/htpasswd.users require valid-user </DirectoryMatch> <Directory /usr/share/nagios3/htdocs> Options +ExecCGI </Directory> </VirtualHost> I also added this in my global Apache config: AddHandler cgi-script .cgi Any help or instructions you can give me would be much appreciated. If more information is needed, let me know.

  Read the article

• Make eix available version match emerge

  - by Ryaner

  We have out Gentoo hosts using a binhost with EMERGE_DEFAULT_OPTS="--getbinpkgonly --usepkgonly" in the make.conf file so that the host only pulled down the binary hosts. All works well from that side. I use eix to check on software versions for upgrades but have hit a problem where eix will see an available version ahead of what is available on the binserver. Using glibc as an example ietpl [VE] / # emerge -s glibc Searching... [ Results for search key : glibc ] [ Applications found : 1 ] * sys-libs/glibc Latest version available: 2.14.1-r3 Latest version installed: 2.14.1-r3 Homepage: Description: GNU libc6 (also called glibc2) C library License: LGPL-2 Then eix reports a higher version available ietpl [VE] / # export LASTVERSION='{last}<version>{}' ietpl [VE] / # /usr/bin/eix --nocolor --format '<category> <name> [<installedversions:LASTVERSION>] [<bestversion:LASTVERSION>] \n' --exact --category-name sys-libs/glibc sys-libs glibc [2.14.1-r3] [2.15-r2] What I'm after is for eix to report the latest version available as 2.14.1-r3 like emerge. I've a feeling this is possible since without any formatting, eix returns Available versions: (2.2) ~2.9_p20081201-r3!s 2.10.1-r1!s 2.11.3!s ~2.12.1-r3!s 2.12.2!s{tbz2} ~2.13-r2!s 2.13-r4!s ~2.14!s ~2.14.1-r2!s 2.14.1-r3!s{tbz2} ~2.15-r1!s 2.15-r2!s ~2.15-r3!s **2.16.0!s **9999!s correctly tagging the latest unmasked binary package with {tbz2} I would have thought that the binary flag would do it, but that returns no matches --binary Match packages with *.tbz2 files.

  Read the article

• Find keyword values from PDF [closed]

  - by JukkaA

  I have a lot of PDF reports I'd need to index. They're mostly "text-based PDFs", not images. I know they all have account number in certain format, 123456AAAAA and some other keyword info like addresses, customer names etc. needed in indexing these files. Basically if the file is ab.pdf, I need to create ab.txt that contains: ACC=123456AAAA Customer=John Doe Date=20120808 What would be the best software/solution to generate indexing information for these? I know there's pdftotext, but piping it to different grep/awk commands is a hack... It would be nice to specify an area in PDF to search for the account number, and specify the format it is in.

  Read the article

• What character can be safely used for naming files on unix/linux?

  - by Eric DANNIELOU

  Before yesterday, I used only lower case letters, numbers, dot (.) and underscore(_) for directories and file naming. Today I would like to start using more special characters. Which ones are safe (by safe I mean I will never have any problem)? ps : I can't believe this question hasn't been asked already on this site, but I've searched for the word "naming" and read canonical questions without success (mosts are about computer names). Edit #1 : (btw, I don't use upper case letters for file names. I don't remember why. But since a few month, I have production problems with upper case letters : Some OS do not support ascii!) Here's what happened yesterday at work : As usual, I had to create a self signed SSL certificate. As usual, I used the name of the website for the files : www2.example.com.key www2.example.com.crt www2.example.com.csr. Then comes the problem : Generate a wildcard self signed certificate. I did that and named the files example.com.key example.com.crt example.com.csr, which is misleading (it's a certificate for *.example.com). I came back home, started putting some stars in apache configuration files filenames and see if it works (on a useless home computer, not even stagging). Stars in file names really scares me : Some coworkers/vendors/... can do some script using rm find xarg that would lead to http://www.ucs.cam.ac.uk/support/unix-support/misc/horror, and already one answer talks about disaster. Edit #2 : Just figured that : does not need to be escaped. Anyone knows why it is not used in file names?

  Read the article

• Cooling Server Rack with Water? Sensible? Reuse energy for small installation?

  - by TomTom

  First - this is not a shopping question, this is not so much about concrete prices but about general feasibility. Makes no sense to get looking fo ra manufacturer it the approach is bad. I am moving my company to new Offices in September, and among them we will expand and consolidate our number crunch cluster. It is so far in a data center. I have a nice room in the basement prepared now. I think about cooling. We will likely run up a power usage of around 10kw by end of the year. That is a LOT of stuff, and cooling will be expensive. I am located in south Poland, close to the German border. This is an area where water is available for relatively cheap price - "wasting water" is not a concern here. My situation is thus a lot different for example than in Spain ;) Physics tells me that to heat 1 liter of water by 1 degree I use 1 Calorie (1KCal), and a kwh power is (and we can assume 100% efficiency - water heaters are pretty efficient) 750 Calories. That means that 1 KWH is 750 liter by 1 degree. 10kw and a 20 degree heat would mean that per hour I need 375 liters. That is 6.25 liters per minute and not WHAT much ;) We talk 270 cubic meters here. Even in summer, the significant underground pipes really cool down the water a LOT more ;) Question: This such an approach feasible? Anyone done that? We talk of a 10kw installation for now. Is it feasible to reuse that heat? The alternative is a decent cooling system that WILL use around 2.5kwh for running. Dropping the water would basically (a) get me a quite cold input compared to the outside air even in summer (I.e. a lower temperature medium to drop the heat in) and (b) replace the need to actually have the outside cooling (which may b problematic - if the air is 22 degree, that is a LOT to fight off, but OTOH the water will be quite cold). I also would possibly save the investment for the outside part of the cooling circuit. Now, second question - is there a feasible way to heat a house with that? ;) After all, brutally speaking, it is a LOT of energy in that water ;) If it is a bad idea, I stop here - if it is not, I start looking for suppliers. Maybe my math is wrong?

  Read the article

• Relative path incorrect in the view layer when hosting a rails3 app in a subdirectory using passenger and apache

  - by Saifis

  I want to host multiple Rails apps on a multiple server using sub-directories. And have encountered some relative path problems. I have made a symbolic link to the app's public directory and placed it in the /var/www/html directory, var/www/html/ /test_app (symbolic link to the public folder of test_app) and set apache as so LoadModule passenger_module /usr/local/lib/ruby/gems/1.9.1/gems/passenger-3.0.12/ext/apache2/mod_passenger.so PassengerRoot /usr/local/lib/ruby/gems/1.9.1/gems/passenger-3.0.12 PassengerRuby /usr/local/bin/ruby <VirtualHost *:80> ServerName test.com DocumentRoot /var/www/html Options Indexes FollowSymLinks -MultiViews RailsBaseURI /test_app </Location> </VirtualHost> The links in the app itself works just fine, all the links acknowledge the test_app/ directory and work, however, when it comes to showing images in the public directory in the view, the relative path goes wrong. Say I have /system/files/1/aaa.png it goes looking for it in /var/www/html/system/files/1/aaa.png rather than /var/www/html/test_app/system/files/1/aaa.png As far as I understand this is an Apache setting problem than something to be done in Rails, if its possible I would prefer to have it contained in the conf file of apache rather than having to alter the code.

  Read the article

• Neighbour table overflow on Linux hosts related to bridging and ipv6

  - by tim

  Note: I already have a workaround for this problem (as described below) so this is only a "want-to-know" question. I have a productive setup with around 50 hosts including blades running xen 4 and equallogics providing iscsi. All xen dom0s are almost plain Debian 5. The setup includes several bridges on every dom0 to support xen bridged networking. In total there are between 5 and 12 bridges on each dom0 servicing one vlan each. None of the hosts has routing enabled. At one point in time we moved one of the machines to a new hardware including a raid controller and so we installed an upstream 3.0.22/x86_64 kernel with xen patches. All other machines run debian xen-dom0-kernel. Since then we noticed on all hosts in the setup the following errors every ~2 minutes: [55888.881994] __ratelimit: 908 callbacks suppressed [55888.882221] Neighbour table overflow. [55888.882476] Neighbour table overflow. [55888.882732] Neighbour table overflow. [55888.883050] Neighbour table overflow. [55888.883307] Neighbour table overflow. [55888.883562] Neighbour table overflow. [55888.883859] Neighbour table overflow. [55888.884118] Neighbour table overflow. [55888.884373] Neighbour table overflow. [55888.884666] Neighbour table overflow. The arp table (arp -n) never showed more than around 20 entries on every machine. We tried the obvious tweaks and raised the /proc/sys/net/ipv4/neigh/default/gc_thresh* values. FInally to 16384 entries but no effect. Not even the interval of ~2 minutes changed which lead me to the conclusion that this is totally unrelated. tcpdump showed no uncommon ipv4 traffic on any interface. The only interesting finding from tcpdump were ipv6 packets bursting in like: 14:33:13.137668 IP6 fe80::216:3eff:fe1d:9d01 > ff02::1:ff1d:9d01: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff1d:9d01, length 24 14:33:13.138061 IP6 fe80::216:3eff:fe1d:a8c1 > ff02::1:ff1d:a8c1: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff1d:a8c1, length 24 14:33:13.138619 IP6 fe80::216:3eff:fe1d:bf81 > ff02::1:ff1d:bf81: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff1d:bf81, length 24 14:33:13.138974 IP6 fe80::216:3eff:fe1d:eb41 > ff02::1:ff1d:eb41: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff1d:eb41, length 24 which placed the idea in my mind that the problem maybe related to ipv6, since we have no ipv6 services in this setup. The only other hint was the coincidence of the host upgrade with the beginning of the problems. I powered down the host in question and the errors were gone. Then I subsequently took down the bridges on the host and when i took down (ifconfig down) one particularly bridge: br-vlan2159 Link encap:Ethernet HWaddr 00:26:b9:fb:16:2c inet6 addr: fe80::226:b9ff:fefb:162c/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:120 errors:0 dropped:0 overruns:0 frame:0 TX packets:9 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:5286 (5.1 KiB) TX bytes:726 (726.0 B) eth0.2159 Link encap:Ethernet HWaddr 00:26:b9:fb:16:2c inet6 addr: fe80::226:b9ff:fefb:162c/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1801 errors:0 dropped:0 overruns:0 frame:0 TX packets:20 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:126228 (123.2 KiB) TX bytes:1464 (1.4 KiB) bridge name bridge id STP enabled interfaces ... br-vlan2158 8000.0026b9fb162c no eth0.2158 br-vlan2159 8000.0026b9fb162c no eth0.2159 The errors went away again. As you can see the bridge holds no ipv4 address and it's only member is eth0.2159 so no traffic should cross it. Bridge and interface .2159 / .2157 / .2158 which are in all aspects identical apart from the vlan they are connected to had no effect when taken down. Now I disabled ipv6 on the entire host via sysctl net.ipv6.conf.all.disable_ipv6 and rebooted. After this even with bridge br-vlan2159 enabled no errors occur. Any ideas are welcome.

  Read the article

• Does SQLIO lie when run from a Hyper-V guest on a VHD?

  - by ScottStonehouse

  SQLIO seems like a useful tool. I thought it would be interesting to try to measure the speed difference between a physical disk and a VHD. So I ran SQLIO on the Hyper-V host on the physical drive. Results seemed reasonable. Then I ran it from the guest to test the vhd (on the same physical disk). I expected it to be a bit slower. But instead it was way faster - like 0ms average latency. So I'm trying to learn something here. It seems like hyper-v is fooling SQLIO somehow but I don't understand it well enough to figure it out. It's a dynamic vhd, no snapshots or anything, and the vhd is the only file on the disk. The physical disk is actually a two SAS drive RAID 1.

  Read the article

• Access NFS share from cygwin?

  - by Jason Voegele

  We have a Windows 2003 Server on which we have installed Microsoft's Services for UNIX, and we have mounted a few NFS shares that contain shared resources that we need to access from this box. When I log in to this server with remote desktop, I am able to browse the contents of the NFS shares and everything works fine. However, one use case that we have is that we need to access this server using SSH, and still be able to access the NFS shares. We are running the Cygwin SSH daemon to provide SSH access to the server, but for some reason when we log in to the Windows 2003 server using SSH we can no longer access the NFS shares. To demonstrate, here is the output of the 'mount' command, first from a Cygwin shell when logged in with remote desktop: $ mount C:/cygwin/bin on /usr/bin type ntfs (binary,auto) C:/cygwin/lib on /usr/lib type ntfs (binary,auto) C:/cygwin on / type ntfs (binary,auto) C: on /cygdrive/c type ntfs (binary,posix=0,user,noumount,auto) O: on /cygdrive/o type nfs (binary,posix=0,user,noumount,auto) P: on /cygdrive/p type nfs (binary,posix=0,user,noumount,auto) Z: on /cygdrive/z type nfs (binary,posix=0,user,noumount,auto) And now, the same 'mount' command when logged in with SSH: $ mount C:/cygwin/bin on /usr/bin type ntfs (binary,auto) C:/cygwin/lib on /usr/lib type ntfs (binary,auto) C:/cygwin on / type ntfs (binary,auto) C: on /cygdrive/c type ntfs (binary,posix=0,user,noumount,auto) Notice the missing O: P: and Z: NFS shares in the latter. Can anyone tell me why I am unable to see these NFS shares when logged in with SSH? Thanks!

  Read the article

• How to step down voltage from 208V to 110V

  - by Eric Dennis

  I have some racks that will be fed by 208V/20A circuits. These circuits will be conditioned and battery-backed by the facility in which these racks will live. 99% of the devices in the rack will be able to support 208V input, so I plan to use these PDUs. However, there may be one or two odd devices that will need 110V input. I know that I can use a step-down transformer to provide 110V for these devices, but that seems like overkill for such a small number of devices, plus I don't want to pay extra for the UPS functionality since my power will already be battery-backed. Any suggestions for something I can use for these one-off 110V devices?

  Read the article

• What would prevent a .BAT file from being run on a mapped drive?

  - by JBurace

  In WinXP SP3, I have a .BAT file on a mapped drive. When I try to run this .BAT file (or even right click-edit) it gives me: --------------------------- Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item. --------------------------- OK --------------------------- This happens with any .BAT file, no matter what is within the file. If the file is on my local computer (like C:) it will run just fine. If someone else runs it from another computer (on the same mapped drive), it runs just fine. I have full permissions on the drive; I can edit/delete/save/write/create in that folder and/or .BAT file and I've ruled out permissions being the issue. It seems like a security prevention, but I can't tell what it would be. It would have to be something on my PC, but I don't use any 3rd party software. What would cause this error?

  Read the article

• What is the default value for Empty Temporary Internet Files when browser is closed in IE8?

  - by schellack

  We have four different machines that all have "Empty Temporary Internet Files when browser is closed" set to true (checked) in IE8's Internet Options (located under the Security section in the Advanced tab). No one remembers checking that checkbox to turn on the setting. What is the default value supposed to be? I'm specifically interested in Windows 7 and Windows XP. I have run rsop.msc on one of the corporate machines—3 of the 4 are members of a corporate network/domain—and see this under User Configuration, which makes the current scenario seem even stranger: The Local Group Policy Editor (gpedit.msc) also shows the Configure Delete Browsing History on exit setting to be Not configured (under Computer ConfigurationAdministrative TemplatesWindows ComponentsInternet ExplorerDelete Browsing History).

  Read the article

• Google Chrome install fails with error 0x80004002

  - by zneak

  I'm using Windows 7 64 bits and I'm trying to install Google Chrome. However, every time I do, I get this error message: Google Update installation failed with error 0x80004002. There is a Show me help for this issue link, but it does nothing. I tried the standalone installer to no avail. I also tried to delete the HKEY_CURRENT_USER\Software\Google registry key, as suggested by other answers, with no more positive effects.

  Read the article

• How to protect custom shapes from being reused? Visio 2010

  - by Chris

  We are building a set of documentation for our business with Visio 2010. We need to make the Visio files accessible to external consultants for review, but we want to ensure that they cannot copy any of our custom shapes or formulas. How can we protect custom shapes/stencils so that they cannot be used outside of our documents? Or, if that's not possible, how can we mark our shapes in such a way that we could prove that they were created by us?

  Read the article

• Remote Linux system via Windows 7

  - by kaila

  I have a dual boot with Windows 7 and Fedora. Though I can long into both without any problems, I am trying to log in to the linux account via the Windows account. Is that possible? Or, is it possible to access my university's linux server via telnet from home? I did so and got an error, with cold not connect to port 23 message. Also, since most of my mail accounts are on Windows, the passwords to which I have forgotten, I would prefer working on a ;remote' connection.

  Read the article

< Previous Page | 412 413 414 415 416 417 418 419 420 421 422 423  | Next Page >