Monthly Archives

Articles indexed in October 2012

Page 462/474 | < Previous Page | 458 459 460 461 462 463 464 465 466 467 468 469  | Next Page >

• Samba4/Ubuntu Shares Incorrectly Available to All Users

  - by Dan

  I've got my Ubuntu server working with Samba4 and got it set up as the Primary domain controller on my network with AD and all that goodness. However, I'm trying to get my Samba configuration to work with the users and groups I've defined with the Active Directory tools from Windows. For instance, I've got a share X which I want users A and B (as part of the 'management' group, known as LLGrpManager in my setup) to see, but no body else. However, after making changes to the configuration, restarting Samba, I test by connecting to the share with my Mac over Samba as user 'C' which isn't part of the management group, and I can, incorrectly, see the X share. I've tried alsorts of combinations of specifying the group with no luck at all. I've got a feeling that my global config might be too lenient or something to do with file permissions but being a bit green, I'm without clue. My /etc/samba/smb.conf # Global parameters [global] server role = domain controller server string = Office Server workgroup = LLDOMAIN realm = lldomain.local netbios name = DUMBO passdb backend = samba4 logon path = \\%L\profiles\%U logon drive = L: log file = /var/log/samba/%m.log max log size = 50 security = ads domain logons = yes domain master = auto usershare allow guests = no valid users = %S [netlogon] path = /var/lib/samba/sysvol/lldomain.local/scripts read only = no guest ok = no [sysvol] path = /var/lib/samba/sysvol read only = No guest ok = no valid users = @LLDOMAIN\LLGrpManager [ShareX] path = /data comment = Entire Data Volume guest ok = no comment = Entire Data Volume guest ok = no valid users = @LLDOMAIN\LLGrpManager admin users = @LLDOMAIN\LLGrpManager browsable = no inherit acls = yes inherit permissions = yes ... My /etc/nsswitch.conf I've also instructed the system to use the nss winbind library when searching for users or groups by adding the stanza passwd and group in /etc/nsswitch.conf: passwd: compat winbind group: compat winbind shadow: compat Permissions on the folder in question drwxrwxrwt 8 root root 4.0K Oct 28 19:11 data

  Read the article

• Is timeout in tracertoutput an indication of an error?

  - by nitramk

  TCP/IP packages sent from my computer to a remote server does not always reach destination and ends up being retransmitted sometimes several times before they succeed. To troubleshoot this, I'm running a tracert to the server: Tracing route to <site> [<address>] Over a maximum of 30 hops: 1 <1 ms <1 ms <1 ms mymachine 2 <1 ms <1 ms <1 ms gw.levonline.com [217.70.32.30] 3 <1 ms <1 ms <1 ms 81.201.213.218 4 <1 ms <1 ms <1 ms bmf1-hmf1.driften.net [81.201.213.12] 5 <1 ms <1 ms <1 ms 10ge-2-4-cr2.a1.sth.ownit.se [84.246.88.157] 6 <1 ms * <1 ms netnod-ix-ge-b-sth-4470.microsoft.com [195.69.11.181] 7 26 ms * * ge-3-0-0-0.ams-64cb-1a.ntwk.msn.net [207.46.42.1] 8 48 ms 57 ms 56 ms ten9-1.lts-76e-1.ntwk.msn.net [207.46.42.133] 9 * * * Request timed out. In step 6 and 7, I'm seeing timeouts while waiting for the reply from the server (as seen above). Running the same tracert many times gives varying output, sometimes the response is fine, but sometimes I get this timeout 1, 2 and sometimes for all 3 packets. The timeout always starts at the same server, netnod-ix-ge-b-sth-4470.microsoft.com. I've tried setting the tracert timeout to 10 seconds, but am still getting the timeout. Running tracert towards other servers does not give me the same timeout. Microsoft network technicians tells me that the problem is not on "their" side. Are these timeouts an indicator of a lost packet on the specific node which did not respond? Are the timeouts an indication of there being a problem, or is it normal?

  Read the article

• net-snmp snptranslate dosnt work for my MIB (snmpget does work)

  - by user1495181

  I add my own MIB module to net-snmp. I put my Mib txt file under - '/usr/local/share/snmp/mibs' I see that if i change net-snmp files their the change is reflected , so this mibs are loaded correct. It seems that it not load my MIB file from there. When i run snmptranslate on my Mib like this: snmptranslate .1.3.6.1.4.1.8077 I get: SNMPv2-SMI::enterprises.8077 My MIB def: TEST-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, enterprises FROM SNMPv2-SMI; testMib MODULE-IDENTITY DESCRIPTION "First draft" ::= { enterprises 8077} testMibObject OBJECT IDENTIFIER ::= {testMib 1} END

  Read the article

• chown: changing ownership of `.': Invalid argument

  - by Pierre

  I'm trying to install some new files on our new server while our sysadmin is in holidays: Here is my df # df -h Filesystem Size Used Avail Use% Mounted on /dev/sdb3 273G 11G 248G 5% / tmpfs 48G 260K 48G 1% /dev/shm /dev/sdb1 485M 187M 273M 41% /boot xxx.xx.xxx.xxx:/commun 63T 2.2T 61T 4% /commun as root , I can create a new directory and run chown under /home/lindenb # cd /home/lindenb/ # mkdir X # chown lindenb X but I cannot run the same command under /commun # cd /commun/data/users/lindenb/ # mkdir X # chown lindenb X chown: changing ownership of `X': Invalid argument why ? how can I fix this ? updated: mount: /dev/sdb3 on / type ext4 (rw) proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) devpts on /dev/pts type devpts (rw,gid=5,mode=620) tmpfs on /dev/shm type tmpfs (rw) /dev/sdb1 on /boot type ext4 (rw) none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw) sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw) xxx.xx.xxx.xxx:/commun on /commun type nfs (rw,noatime,noac,hard,intr,vers=4,addr=xxx.xx.xxx.xxx,clientaddr=xxx.xx.xxx.xxx) version: $ cat /etc/redhat-release CentOS release 6.3 (Final)

  Read the article

• HIGH CPU USAGE + low memory usage

  - by hadi

  as you can see in below , there are high cpu usage by httpd request. please help me to decrease them. thanks. 28577 apache 15 0 99676 53m 3488 S 21 0.2 1:13.67 httpd 28568 apache 15 0 99676 53m 3496 S 19 0.2 1:14.92 httpd 28608 apache 15 0 99676 53m 3428 R 19 0.2 0:28.28 httpd 28615 apache 15 0 99676 53m 3436 R 19 0.2 0:25.33 httpd 28616 apache 15 0 99676 53m 3440 S 19 0.2 0:25.83 httpd 28619 apache 15 0 99676 53m 3436 R 19 0.2 0:26.12 httpd 28635 apache 15 0 97.9m 54m 3416 S 19 0.2 0:24.86 httpd 28558 apache 15 0 97.9m 54m 3432 R 17 0.2 1:40.75 httpd 28560 apache 15 0 97.9m 54m 3496 R 17 0.2 1:40.02 httpd 28621 apache 15 0 97.9m 54m 3420 S 17 0.2 0:25.61 httpd 28641 apache 16 0 97.9m 54m 3428 R 17 0.2 0:21.52 httpd 28642 apache 15 0 99756 53m 3424 R 15 0.2 0:21.46 httpd 28643 apache 15 0 99676 53m 3424 S 15 0.2 0:21.59 httpd 28594 apache 15 0 99756 53m 3428 R 13 0.2 0:44.41 httpd 28618 apache 15 0 99676 53m 3420 S 13 0.2 0:26.15 httpd 28654 apache 15 0 99676 53m 3472 S 13 0.2 0:04.27 httpd 28575 apache 15 0 99756 53m 3436 R 11 0.2 1:14.02 httpd 28576 apache 15 0 99676 53m 3496 S 11 0.2 1:16.79 httpd 28634 apache 15 0 99676 53m 3436 S 11 0.2 0:25.36 httpd 28653 apache 15 0 99676 53m 3424 S 11 0.2 0:04.35 httpd 28574 apache 15 0 99676 53m 3440 S 10 0.2 1:13.05 httpd 28592 apache 15 0 99676 53m 3492 R 10 0.2 0:45.78 httpd 28595 apache 15 0 99676 53m 3432 R 10 0.2 0:47.02 httpd 28617 apache 16 0 99676 53m 3436 S 10 0.2 0:25.32 httpd 28620 apache 15 0 99676 53m 3432 S 10 0.2 0:25.35 httpd 28597 apache 15 0 99676 53m 3428 S 8 0.2 0:43.56 httpd 11345 mysql 15 0 2927m 198m 4472 R 4 0.6 1624:43 mysqld 1 root 15 0 2036 648 552 S 0 0.0 0:16.97 init 2 root RT 0 0 0 0 S 0 0.0 0:48.50 migration/0 3 root 34 19 0 0 0 S 0 0.0 0:26.72 ksoftirqd/0 4 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/0 5 root RT 0 0 0 0 S 0 0.0 0:04.98 migration/1 6 root 34 19 0 0 0 R 0 0.0 0:27.51 ksoftirqd/1 7 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/1 8 root RT 0 0 0 0 S 0 0.0 0:15.42 migration/2 9 root 34 19 0 0 0 S 0 0.0 0:26.50 ksoftirqd/2 10 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/2

  Read the article

• Blocking IP's Nginx behind proxy

  - by FunkyChicken

  I'm running a Nginx 1.2.4 webserver here, and I'm behind a proxy of my hoster to prevent ddos attacks. The downside of being behind this proxy is that I need to get the REAL IP information from an extra header. In PHP it works great by doing $_SERVER[HTTP_X_REAL_IP] for example. Now before I was behind this proxy of my hoster I had a very effective way of blocking certain IP's by doing this: include /etc/nginx/block.conf and to allow/deny IP's there. But now due to the proxy, Nginx sees all traffic coming from 1 IP. Is there a way I can get Nginx to read the IP's like how PHP does, with the X-REAL-IP header?

  Read the article

• How to test a HTTPS URL with a given IP address

  - by GreatFire

  Let's say a website is load-balanced between several servers. I want to run a command to test whether it's working, such as curl DOMAIN.TLD. So, to isolate each IP address, I specify the IP manually. But many websites may be hosted on the server, so I still provide a host header, like this: curl IP_ADDRESS -H 'Host: DOMAIN.TLD'. In my understanding, these two commands create the exact same HTTP request. The only difference is that in the latter one I take out the DNS lookup part from cURL and do this manually (please correct me if I'm wrong). All well so far. But now I want to do the same for an HTTPS url. Again, I could test it like this curl https://DOMAIN.TLD. But I want to specify the IP manually, so I run curl https://IP_ADDRESS -H 'Host: DOMAIN.TLD'. Now I get a cURL error: curl: (51) SSL: certificate subject name 'DOMAIN.TLD' does not match target host name 'IP_ADDRESS'. I can of course get around this by telling cURL not to care about the certificate (the "-k" option) but it's not ideal. Is there a way to isolate the IP address being connected to from the host being certified by SSL?

  Read the article

• RewriteMap syntax Regex

  - by ienabellamy

  in my .htaccess i've tons of directives, with same syntax: RewriteRule ^(.*)/PRODUCT_1.aspx http://www.site.com/product.php?id_product=2891 RewriteRule ^(.*)/PRODUCT_2.aspx http://www.site.com/product.php?id_product=2896 and everything works. Now, i created a RewriteMap in my because i need to increase velocity (20.000 redirect 301 in htaccess no good), so: RewriteEngine On RewriteMap redirects dbm=db:/var/www/html/presta152/prestashop/redirects.db RewriteCond ${redirects:$1} !="" RewriteRule ^(.*)$ ${redirects:$1} [redirect=permanent,last] and my redirects.db is created by redirects.txt, that contains: /PRODUCT_1.aspx http://www.site.com/product.php?id_product=2891 /PRODUCT_2.aspx http://www.site.com/product.php?id_product=2896 this works if i try to call for example: www.site.com/PRODUCT_1.aspx i'm redirected... but if i try to call www.site.com/everythingpossibileinside/PRODUCT_1.aspx the redirect doesn't work. So, in my .htaccess this rule: RewriteRule ^(.*)/PRODUCT_1.aspx http://www.site.com/product.php?id_product=2891 works, but in my RewriteMap no. I think i must change this directive: RewriteRule ^(.*)$ ${redirects:$1} [redirect=permanent,last] i tried, but unsuccessful. Thanks to all.

  Read the article

• LameUser trying - apache2 webserver authentication - IP range to access without pass prompt others with it

  - by Mikee

  I have (maybe silly) question regarding the apache2 webserver and security - I am trying to archieve this: Users connecting from 192.168.1.24 not to be prompted for password and allowed Others asked for username and password if correct then connect. I am trying to do this for the whole directory /var/www No matter whether I put the code into .htaccess file or in httpd.conf it doesn't work for me. Order deny,allow Deny from all AuthName "PassRequest" AuthType Basic AuthUserFile /var/.htpasswd Require valid-user Allow from 192.168.1.24 Satisfy Any If I try to connect to the page I am allowed from both the allowed IP or any other, If I remove the satisfy any line then I am prompted for password, if I remove the password too and try to connect from different IP I am NOT REFUSED ... is there some module that needs to be activated or why is the IP directive skipped ? It needs to be put in every folder or /var/www/.htaccess is enough ? can I just put it in httpd.conf instead or not ?? I spend last 4 hours trying to google up why it is acting like that, Any help will be highly appreciated :-))

  Read the article

• What kind of SSL Cert do I need and where do I get it?

  - by chacham15

  I want to have subdomains with SSL within my domain. The main difference is that each subdomain is hosted by a different person with a different public key/private key pair. Let me illustrate with an example: User send his public key and requests subdomain from foo.com User is added and assigned subdomain bar (bar.foo.com). Users public key is stored for future validation against bar.foo.com User goes to bar.foo.com and see's a validated SSL connection. From what I gather, this means that I need to create a CA, which is fine. The problem is that from what I recall, a CA needs a special sort of SSL Cert. How do I go about getting this?

  Read the article

• RHEL6 kick start fails with kernel panic - not syncing error

  - by mrchampe

  On a brand new (just unboxed) Dell Precision 7500 computer, I began a kickstart using a red hat boot disk and a kickstart file hosted at an http address. There is a picture of the full error below with trace information I believe this is different than the other questions relating to kernel panic errors. What I would like to know is What causes the kernel panic How does one fix this such that the kickstart finishes Additional information can be provided as necessary.

  Read the article

• Single domain name potentially resolving to multiple servers

  - by Jace

  first time here at Server Fault, and I apologize in advance that this domain stuff is not really my strength. Any and all suggestions are much appreciated. I am completely lost and incredibly tired! I've inherited an incredibly convoluted system from my predecessor, and I'm trying to find a way to solve it - or I need to be told that it just isn't possible. I've got an old site on ServerA (some kind of Linux distribution), with the domain SomeDomain.com There is a new site sitting on ServerB (Ubuntu), with the intention of having SomeDomain.com to serve it in the future (it is replacing the old site) ServerA also has a web app that is currently in use by other departments within the company (accessible at SomeDomain.com/web-app/) The goal: To have SomeDomain.com and all extensions of this domain name (sub-domains, URL's etc.) serve the new site on ServerB. BUT, the URL SomeDomain.com/web-app/ must serve the Web App on ServerA. The Catch: The ServerA is a shared server with a hosting company with VERY limiting restrictions in place - I cannot adjust DNS settings (apart from Name servers - but cannot set A records or anything, I have full access to ServerB to do as I wish). Therefore the web-app MUST be served from SomeDomain.com/web-app/ and not from a sub-domain or anything. These limitations make migrating the web-app from Server A to Server B rather undesirable, AND this web-app will be replaced in the near future, so it isn't worth the effort right now. Therefore, ultimately I will want 1 domain name to resolve to Server B's IP address most of the time, but in the event that the URL is SomeDomain.com/web-app/, it should resolve to Server A's IP. Note: The domain names don't, technically, have to resolve to one IP or another - but ultimately the URL's must stay consistent Some things I have tried: I've looked into mod_rewrite and .htaccess to try and achieve this effect, but it doesn't look like it's going to work for me - but I may have done it wrong (On Server B, I just checked if the request URI was /web-app/ and tried to serve the /web-app/ folder on Server A) I do have the ability to modify the name servers on both servers I am not able to make a sub domain on Server A that points back to Server A (I assume because the hosting company's servers use the URL to determine what site the serve). I figured this could be good as I'd could set an A record on Server B to point to the web app on Server A - but alas, Server A requires SomeDomain.com. If there is any more information I can give, please let me know. I need a nudge in the right direction, ideas or a solution.

  Read the article

• How do I get Tomcat 7 to start up faster in Linux CentOS kernel version 2.6.18?

  - by user1786833

  I am experiencing a problem with slow start up times for Tomcat 7. I have done some testing by tweaking configuration parameters both on Linux CentOS kernel version 2.6.18 and on Windows 7 using this link as my primary guide: http://wiki.apache.org/tomcat/HowTo/FasterStartUp and managed only a modest improvement. The improvements seemed to result when I added metadata-complete="true" attribute to the element of my WEB-INF/web.xml file and when I added the names of almost all the jars we use for our application to the tomcat.util.scan.DefaultJarScanner.jarsToSkip property in conf/catalina.properties file. I've also used this JAVA_OPTS in the setenv.sh file: JAVA_OPTS="$JAVA_OPTS -server -Xms1536m -Xmx1536m -XX:MaxPermSize=256m -XX:NewRatio=2 -XX:+UseParallelGC -XX:ParallelGCThreads=2 -Dsun.rmi.dgc.client.gcInterval=1800000 -Dsun.rmi.dgc.server.gcInterval=1800000 -Dorg.apache.jasper.runtime.BodyContentImpl.LIMIT_BUFFER=true " but actually saw my start up times increase slightly. Our QA and production environments are on Linux CentOS so I'm hoping to get more information on improving Tomcat 7 start up times in that environment. My primary role is java developer and I don't have much system administration experience so I appreciate any input. Thank you for your time and suggestions.

  Read the article

• How can I disable reverse DNS in Apache 2?

  - by Creighton Hale

  I want to disable reverse DNS in Apache 2. I have done the following steps: In apache2/apache2.conf file ,HostnameLookups is set as OFF Tcpdump session confirmed thatApache was doing double reverse lookups even though the HostnameLookupsdirective was clearly turned off. No hostnames insites-available. The problem still remains. UPD: version of apache is dpkg -l | grep apache2 ii apache2-mpm-prefork 2.2.16-6+squeeze4 Apache HTTP Server - traditional non-threaded model ii apache2-utils 2.2.16-6+squeeze4 utility programs for webservers ii apache2.2-bin 2.2.16-6+squeeze4 Apache HTTP Server common binary files ii apache2.2-common 2.2.16-6+squeeze4 Apache HTTP Server common files apache2 -l Compiled in modules: core.c mod_log_config.c mod_logio.c prefork.c http_core.c mod_so.c I think mod_security is not present.

  Read the article

• PHP does not allow https connections

  - by FunkyChicken

  Hey guys im running PHP 5.4.0 and I cannot cURL nor files_get_content() https connections. Using curl in a PHP script shows: [root@ns1]# /opt/php/bin/php -q test.php * About to connect() to www.google.com port 443 * Trying 74.125.225.210... * connected * Connected to www.google.com (74.125.225.210) port 443 * successfully set certificate verify locations: * CAfile: /etc/pki/tls/certs/ca-bundle.crt CApath: none Segmentation fault Using file_get_contents() shows: Warning: file_get_contents(): Unable to find the wrapper "https" - did you forget to enable it when you configured PHP? in /test.php OpenSSL and OpenSSL-devel are installed, and PHP is also configured with cURL support for SSL connections. See: http://i.imgur.com/ExAIf.png Any idea what might be going wrong? Further info: CentOS 5.8(64) with Nginx 1.2.4

  Read the article

• Linux RHEL : Making disk image efficiently

  - by TheProfoundGeek

  I have a linux box having RHEL. Its disk (hda1) is having free space of about 25GB. I have an another disk (hda2) which is of 250GB having another RHEL instance, it's partitioned for 200GB. Data on the disk occupies about 21GB of data. The image of hda2 needs to be taken and restored on other disk of same specs. What is the best way to make image file of the hda2? Ideally the images size should be around 25GBs as the actual data on the disk is just 21GB. I am aware about the following two methods. Method 1 : Raw Image dd if=/dev/hda2 of=/path/to/image dd if=/path/to/image of=/dev/hda3 Question 1 : Will the above method make a gigantic image of 250GBs? Is it efficient? Method 2 : Compressed Image. dd if=/dev/hda2 | gzip > /path/to/image.gz gzip -dc /path/to/image.gz | dd of=/dev/hda2 Question 2 : I tried the method 2, its taking too long. What are the pit falls of this methods? Which of the above method id efficient and why? Is there any other Linux utility which can do the job? Third party tools are no no.

  Read the article

• How to setup email server in ubuntu 12.04LTS(debian 7 wheezy/sid) running on linode vps

  - by shihon

  I am working on email server, since i tried several times to create email server on ubuntu12.04LTS with postfix + dovecote + postfixadmin + courier + clamav + spamassassin. But everytime i install these packages i face new problems, like mails send to localhost users and found in users maildir. But I can't determine how to configure/setup for send an email to external smtp like gmail, yahoo. The most worst thing i can't determine how to use sasl, because i am not using SSL so it is not worthy for my domain. This is so complicated, i search everywhere on google: links are https://help.ubuntu.com/community/PostfixCompleteVirtualMailSystemHowto http://www.starbridge.org/spip/spip.php?article1&lang=fr http://knopix.wordpress.com/2008/01/16/postfixadmin-postgresql-courier-squirrelmail-on-debian-etch-howtotutorial/ http://flurdy.com/docs/postfix/ Is there any article for install email server on ubuntu 12.04LTS. Please help me to understand these things.

  Read the article

• Virtual machine lost after power cut

  - by dannymcc

  We have just had a power issue and our ESX (ESXi 4.1.0) host lost power and then rebooted. All but one of the virtual servers have rebooted with no problem, however one of them refused to power up. I try to power it on and I get the following error: File <unspecified filename> was not found Reason: The system cannot find the file specified. Cannot open the disk '/vmfs/volumes/4e03076e-90834647-b846-001185c38f42/LAMP- Stack/turnkey-lamp-11.3-lucid-x86.vmdk' or one of the snapshot disks it depends on. VMware ESX cannot find the virtual disk "/vmfs/volumes/4e03076e-90834647-b846- 001185c38f42/LAMP-Stack/turnkey-lamp-11.3-lucid-x86.vmdk". Verify the path is valid and try again. I have logged into the ESX host to see if the file is there an have found only the following file that matches the filename: /vmfs/volumes/4e03076e-90834647-b846-001185c38f42/LAMP-Stack/turnkey-lamp-11.3-l ucid-x86-s001.vmdk I notice that the above file has '-s001' after the filename. Is this recoverable? Any help of advice is greatly appreciated! EDIT: Running ls -l on the directory that contains the file shows this: drwxr-xr-t 1 root root 1680 Feb 9 09:49 4e03076e-90834647-b846-001185c38f42 The databrowser file system looks like this: and in a different directory there is the file that matches the missing one:

  Read the article

• Hyper-V share a folder between host and instance

  - by Fly_Trap

  I have a hyper-v server and several VM's (Virtual Machines). All the VM's are connected to an external network. I have tried to share a folder on the host and connect via the VM, I can do this but I'm prompted for a user name and password (as you would expect). I do not want to enable the "Everyone" group permissions as the physical host server is on a network of other servers. I have created a new virtual internal network in Hyper-V and given it's adapter a static ip of 33.0.0.100. I have added the virtual adapter to one of the VM's and set to IP to 33.0.0.2 (as advised here). Again this seems to work but I'm still prompted for a user name and password. Am I on the right lines here? I just want to share a directory from the host to the vm's without exposing the share to other servers on the network.

  Read the article

• How to fix an SSD

  - by anonymous

  I have a Samsung 128 go SSD : MZ5PA128HMCD-01000. When I'm using it : there is always I/O errors. I tried to secure-erase it. But it is impossible to create a new NTFS (or any filesystem...) partition because I still get I/O errors. I tought maybe upgrading the firmware will solve the problem. Unfortunately, I'm not able to upgrade the firmware with Samsung SSD Magician Tool ... because Magician says there is no Samsung SSD on my computer... Is there a way to make Magician recognize this Samsung MZ5PA128HMCD-01000 SSD? Is another tool available to flash any firmware on a SSD? What should I do to fix this SSD?

  Read the article

• Joining windows LANs through SSH tunnel

  - by Akke

  I have at home a computer (a windows 7 ult machine) I need to use to manage stuff at the office which hosts windows and linux servers. I am able to set up a SSH tunnel (atleast for firefox proxying) and I'd like to be able to access shared windows network drives on the other end too. I heard something about needing some kind of samba service but I couldn't find anything useful by googling that. What do I need in order to make an SSH tunnel to the office (a NAS, running linux) so that I can access windows server 2008 and windows 7 network drives? Bonus: I'd like to be able to access a MSSQL database server too if it's possible.

  Read the article

• Context-specific remap

  - by dotancohen

  I have the following handy VIM map: inoremap ( ()<Left> However, sometimes I will enter Insert mode to add a function call around a variable, like so: Was: $sql = "SELECT * FROM " . $someTable; To: $sql = "SELECT * FROM " . mysql_real_escape_string($someTable); The mapping makes a redundant ) after mysql_real_escape_string(. Is there any way to refactor the mapping so that if there exists a character after the cursor, and the character after the cursor is not whitespace, then )<left> is not appended to (? Thanks.

  Read the article

• Configuring Corporate Windows Error Reporting On Windows 7

  - by Clément

  Is there any good documentation out there explaining how to setup Corporate Error Reporting (CER) on Windows 7? I found some information in Advanced Windows Debugging but the book targets Windows XP and things have changed quite a bit since then. I could not find any tutorials on the Internet/MSDN either. To give a bit of background information, I work for a company with 25 employees and I would like to send crash reports to a local server so that I can analyze what causes our tools to crash. I think I need to know two things: Setting up a Corporate Error Reporting server. Setting up computer to send error reports to our Corporate Error Reporting server.

  Read the article

• How to redirect a specific url through a proxy for multiple services?

  - by CrystalFire

  I have a website hosted on 000webhost.com for free. I am unable to connect directly to the site because Comcast has blocked a portion of 000webhost's servers for free accounts due to other people hosting malicious content. In order to maintain my website, I cannot use my computer to directly connect to the server. I am wondering if there is a way by which I can specifically forward attempts to access the server through a proxy, transparently. The current system that I am on is Windows, but I also have systems running Mac OSX and Linux, so solutions for any system could be fine. I've found answers which work for http, but I'm looking for a solution which will let me use all the other functions as well, such as ftp and ssh.

  Read the article

• How to block access to addresses outside network (internet)

  - by devnull

  I have a homeserver, that is now connected to the internet with an own network device (ath0 - 192.168.1.x). It also has one more network interface (eth0 - 192.168.0.x). Soon I will get a second internet line that will be connected the second network. The server then has both networks with different internet lines available, but i only want it to connect to the internet on the old ath0 interface - not the new eth0 (192.168.0.x). Background of that constellation is that the new line has a volume-limit in traffic - the old hasn't and i need the new line for all mobile devices and laptops. The devices should be able to use the new network to connect to the internet and the server. The homeserver is a debian 6 with iptables and some already written rules for it. I need now a rule to block all outgoing internet access on the eth0 interface - i guess it could be something with --target != 192.168.0.0 but i did not succeed in finding the proper solution. Edit: found the solution: iptables -A OUTPUT -o eth0 -d 192.168.0.0/24 -m state --state NEW,ESTABLISHED -j ACCEPT With that setting, all traffic that uses the eth0 interface is only allowed if the destination is inside the network 192.168.0.x - all other traffic is denied .

  Read the article

< Previous Page | 458 459 460 461 462 463 464 465 466 467 468 469  | Next Page >