Monthly Archives

Articles indexed in October 2012

Page 470/474 | < Previous Page | 466 467 468 469 470 471 472 473 474  | Next Page >

  • Automatically creating volume partitions on boot

    - by Justin Meltzer
    I followed this guide: http://www.mongodb.org/display/DOCS/Amazon+EC2+Quickstart to set up Mongodb. It had me create a RAID 10 array out of the four devices on EBS. Then it had me create a physical volume, a volume group, and three logical volumes out of that RAID 10 array. Lastly it had me create ext4 filesystems out of the logical volumes and mount them. Now the quickstart guide had me put two things in place so that these steps would be replicated on reboot of the system. It had me add some instructions to the mdadm.conf file to automatically create the RAID 10 array, and it also had me add instructions to the fstab file to automatically mount the filesystem for each logical volume. However, the quickstart guide does not have anything for automatically creating the logical volumes from the RAID 10 array. I checked my system and see that each of the four devices are part of a RAID array: $ sudo mdadm -Q /dev/sdh1 /dev/sdh1: is not an md array /dev/sdh1: device 0 in 4 device unknown raid10 array. Use mdadm --examine for more detail. However, the filesystem is never created or mounted from fstab because it's trying to mount it from logical volumes that were never created (or so it seems). My question is, how can I automatically accomplish all the steps from the quickstart guide on a reboot of the system, and what config file do I need to add data to so that I can automatically create these volume partions after the RAID 10 is created but before the filesystem is mounted. Also I'm unsure whether fstab actually creates and mounts the filesystem or just mounts the filesystem.

    Read the article

  • Troubleshooting sudoers via ldap

    - by dafydd
    The good news is that I got sudoers via ldap working on Red Hat Directory Server. The package is sudo-1.7.2p1. I have some LDAP/Kerberos users in an LDAP group called wheel, and I have this entry in LDAP: # %wheel, SUDOers, example.com dn: cn=%wheel,ou=SUDOers,dc=example,dc=com cn: %wheel description: Members of group wheel have access to all privileges. objectClass: sudoRole objectClass: top sudoCommand: ALL sudoHost: ALL sudoUser: %wheel So, members of group wheel have administrative privileges via sudo. This has been tested and works fine. Now, I have this other sudo privilege set up to allow members of a group called Administrators to perform two commands as the non-root owner of those commands. # %Administrators, SUDOers, example.com dn: cn=%Administrators,ou=SUDOers,dc=example,dc=com sudoRunAsGroup: appGroup sudoRunAsUser: appOwner cn: %Administrators description: Allow members of the group Administrators to run various commands . objectClass: sudoRole objectClass: top sudoCommand: appStop sudoCommand: appStart sudoCommand: /path/to/appStop sudoCommand: /path/to/appStart sudoUser: %Administrators Unfortunately, members of Administrators are still refused permission to run appStart or appStop: -bash-3.2$ sudo /path/to/appStop [sudo] password for Aaron: Sorry, user Aaron is not allowed to execute '/path/to/appStop' as root on host.example.com. -bash-3.2$ sudo -u appOwner /path/to/appStop [sudo] password for Aaron: Sorry, user Aaron is not allowed to execute '/path/to/appStop' as appOwner on host.example.com. /var/log/secure shows me these two sets of messages for the two attempts: Oct 31 15:02:36 host sudo: pam_unix(sudo:auth): authentication failure; logname=Aaron uid=0 euid=0 tty=/dev/pts/3 ruser= rhost= user=Aaron Oct 31 15:02:37 host sudo: pam_krb5[1508]: TGT verified using key for 'host/[email protected]' Oct 31 15:02:37 host sudo: pam_krb5[1508]: authentication succeeds for 'Aaron' ([email protected]) Oct 31 15:02:37 host sudo: Aaron : command not allowed ; TTY=pts/3 ; PWD=/auto/home/Aaron ; USER=root ; COMMAND=/path/to/appStop Oct 31 15:02:52 host sudo: pam_unix(sudo:auth): authentication failure; logname=Aaron uid=0 euid=0 tty=/dev/pts/3 ruser= rhost= user=Aaron Oct 31 15:02:52 host sudo: pam_krb5[1547]: TGT verified using key for 'host/[email protected]' Oct 31 15:02:52 host sudo: pam_krb5[1547]: authentication succeeds for 'Aaron' ([email protected]) Oct 31 15:02:52 host sudo: Aaron : command not allowed ; TTY=pts/3 ; PWD=/auto/home/Aaron ; USER=appOwner; COMMAND=/path/to/appStop The questions: Does sudo have some sort of verbose or debug mode where I can actually watch it capture the sudoers privilege list and determine whether or not Aaron should have the privilege to run this command? (This question is probably independent of where the sudoers database is kept.) Does sudo work with some background mechanism that might have a log level I could turn up? Right now, I can't fix a problem I can't identify. Is this an LDAP search failure? Is this a group member matching failure? Identifying why the command fails will help me identify the fix... Next step: Recreate the privilege in /etc/sudoers, and see if it works locally... Cheers!

    Read the article

  • <VirtualHost fqdn.mydomain.com:80> not recommended?

    - by Alois Mahdal
    In Apache2 documentation thay say that in <VirtualHost *:80>, the * can be replaced by IP or FQDN, but the FQDN is not recommended. Addr can be: The IP address of the virtual host; A fully qualified domain name for the IP address of the virtual host (not recommended); But why is it not recommended? If I have www.mydomain.com and webmail.mydomain.com pointing to the same IP address, why shouldn't I use the names here?

    Read the article

  • Network connection on Linux

    - by Kevin
    A general question about network connection on Linux : once a network connection goes into time_wait, is it still tied to the process ? Does it still use resources like say filehandle ? Reason I ask is because once it goes into time_wait, lsof does not report it anymore. I guess that means that the network connection is no longer tied to the process and hence does not count against filehandle limit. Would like to confirm though.

    Read the article

  • yum update with shared cache

    - by Sammitch
    We've got a big batch of RHEL6 machines that are due for patching, and for some reason the process here does not involve a local repo. I'm new here, I've asked why, ["it just didn't work"] and I don't have enough time to make it work before the window that's already scheduled. So the usual method is to install yum-downloadonly and run yum update --downloadonly --downloaddir=/mnt/cifs_share and then yum update /mnt/cifs_share/*.rpm which just does not look right to me since not all of these machines have the same set of installed packages. The method I tried today was mounting the share to /var/cache/yum/x86_64/6Server/rhel-x86_64-server-6/packages/ which worked, but then yum automatically deleted everything once it finished. I've looked over the yum man page, but I don't see any flag I can feed it to stop it from deleting everything, nor a flag like up2date's --tmpdir=/mnt/cifs_share. Can anyone out there help me kludge this together until I can get a local repository working?

    Read the article

  • Windows Server 2012 and Ubuntu 12.04.1 under Hyper-V

    - by Technicolour
    I've set up an instance of Ubuntu 12.04.1 LTS under Hyper-V 2012. However it seems to be nondeterministic as to whether or not it completes the boot process. I get a Kernel Panic, "IO-APIC + timer doesn't work!", which from my research is caused by not having integration services correctly installed? It was my understanding that the integration services were all now baked into the kernel? It should then be fine to update the OS (including any kernel updates, as I'm guessing that's what has happened) Being able to rely on this successfully booting would be great as I intend on using ssh for crisis situations.

    Read the article

  • Adding more drives to a drive array

    - by Mystere Man
    I have a friend who has two servers, a Dell 1800 and an HP 350 ML G5, both have SAS drive arrays. The Dell is a 3.5" and the HP is a 2.5". They currently only have 3 drives in each array. We want to add additional drives, but they do not appear to have caddies, just "fake" covers. I haven't been able to take a good look at them, so I'm not sure what I need to do here. Are the "sockets" just there, and I can buy additional caddies and just stick them in? Or do I have to buy some kind of caddy adapter? Also, i'm thinking of just going 2.5" in the new server, so is there a 2.5" adapter caddy that will fit in the 3.5" chassis for the Dell, so I can use 2.5" drives in the 3.5" chassis? Can I buy 6GB/s drives and add them to the 3GB/s controller? The reason is that we're going to replace both computers in a year or so, and we want to bring the drives with. So rather than buy 3GB/s drives, we just want to buy 6GB/s drives so they can be used in the new server.

    Read the article

  • Postfix does not work after setting server hostname from plesk

    - by Michael
    I have recently set my server hostname from localhost.localdomain to xx.mydomain.com from the plesk control panel. However after doing this change postfix has stopped working, I tried restarting and regenerating the config files but to no avail. I am not familiar with postfix but I believe there is a setting to be changed in main.cf. Here are the relevant errors I receive: postfix/postfix-script: starting the Postfix mail system postfix/master: daemon started -- version 2.8.4, configuration /etc/postfix postfix/cleanup: fatal: host/service localhost/12768 not found: Name or service not known postfix/pickup: warning: maildrop/E5559996219: error writing 4FA2C996217: queue file write error postfix/master: warning: process /usr/libexec/postfix/cleanup pid 15334 exit status 1 postfix/master: warning: /usr/libexec/postfix/cleanup: bad command startup -- throttling Any ideas? EDIT Setting it back to localhost.localdomain makes it work again. The only references to localhost/12768 I can find in main.cf are: smtpd_milters = inet:localhost:12768 non_smtpd_milters = inet:localhost:12768 Should something be changed here? These two lines stay the same when I change the hostname. EDIT If I comment out the two mail filter lines (the ones shown above) and restart, postfix works with the new hostname. However this is obviously not the ideal solution...

    Read the article

  • How do you interpret `strace` on an apache process returning `restart_syscall`?

    - by indiehacker
    We restart an apache server every day because RAM usage reaches its limit. Though of value See this serverfault answer, I dont think lowering the MaxClients in the apache configuration is a solution to the unknown root problem. Can you make sense out of the below data? Below is an extract of what $top with M returns: 20839 www-data 20 0 1008m 359m 22m S 4 4.8 1:52.61 apache2 20844 www-data 20 0 1008m 358m 22m S 1 4.8 1:51.85 apache2 20842 www-data 20 0 1008m 356m 22m S 1 4.8 1:54.60 apache2 20845 www-data 20 0 944m 353m 22m S 0 4.7 1:51.80 apache2 and then investigating a single process with $sudo strace -p 20839 returns only this one line, which is cryptic, for me: restart_syscall(<... resuming interrupted call ...> <unfinished ...> Any insights? Thanks.

    Read the article

  • Is it safe to use S3 over HTTP from EC2, as opposed to HTTPS

    - by Marc
    I found that there is a fair deal of overhead when uploading a lot of small files to S3. Some of this overhead comes from SSL itself. How safe is it to talk to S3 without SSL when running in EC2? From the awesome comments below, here are some clarifications: this is NOT a question about HTTPS versus HTTP or the sensitivity of my data. I'm trying to get a feeling for the networking and protocol particularities of EC2 and S3. For example Are we guaranteed to be passing through only the AWS network when communicating from EC2 to S3 Can other AWS users (apart from staff) sniff my communications between EC2 and S3 Is authentication on their api done on every call, and thus credentials are passed on every call? Or is there some kind of authenticated session. I am using the jets3t lib. Feedback from people with some AWS experience would be appreciated. Thanks Marc

    Read the article

  • Forward request through IPTables

    - by Jeremy
    I have a server running CentOS with 50 IP addresses on it. I was looking to use it as a proxy server (not just HTTP), but can't find any examples on how to set up the IP Tables. I want to proxy into IP-X and have my request look like its coming from IP-X. I currently do this on squid, but we need to proxy more than just HTTP traffic. Here is an example of the squid config: acl users src 255.255.255.255 #Locked down IP address acl all src 0.0.0.0/0.0.0.0 # http access rules http_access deny !users http_access allow users http_reply_access deny !users http_reply_access allow users icp_access deny all #ip_addresses acl ip3 myip 10.1.1.3 tcp_outgoing_address 10.1.1.3 ip3 Do to IP restrictions I need access to IMAP, POP and SMTP through a proxy. I want to use the server I already pay for that has 50 IPs on it as the proxy server.

    Read the article

  • 'Unlimited' free trial of Windows Server 2008 by deleting and reinstalling VM? [closed]

    - by MrVimes
    I am using Virtual Machine software (VirtualBox) to learn Windows Server 2008 R2 Network Infrastructure (70-642). Trouble is - I'm learning at an extremely slow pace and so the trial periods of my virtual machines are close to running out. If I delete the VMs then install WS2008R2 from scratch on new VMs is that violating the acceptable use policy of Microsoft? I am aware that I can extend the trial, but it seems I can only do that by 10 days at a time. Also I think having to re-install from scratch is a good way to reinforce the knowledge.

    Read the article

  • Remotely initiate windows updates

    - by TetraFlash
    I have a network with countless workstations on it and the windows updates are done through WSUS in push cycles to allow us to use a generic image and configuration and avoid network congestion. I have a number of workstations in storage that are connected once a month for a few days to recieve updates, however not all of them fall within their push cycle. I want to avoid going to each machine and clicking "check updates" as that would require me to connect a monitor, mouse and keyboard. Is there a way (preferably through powershell but im open minded) to initiate a check and install of updates on a remote system? Lets say for 1 system at a time right now, I can add a file reader and a look later. NOTE: the configuration of the WSUS server is above my pay grade, im simply being asked to ensure these machines are updated. Thanks for any help or hints

    Read the article

  • Windows 2008 startup script will not run?

    - by larsks
    I am trying to get a very simple batch script to run when my Windows 2008 Server (R2) system starts up. I have added the script to the "Startup Scripts" in the local group policy by running gpedit.msc, and I see the script listed under Windows Settings/Scripts (Startup/Shutdown)/Startup when I run rsop.msc, but the script is not being executed. The "Last Executed" column in rsop is empty even after a reboot, and a file that should be created by the script is never created. At the moment, the entire contents of the script are: rem Check if this script is running. date /t > c:\temp\flag The target directory (c:\temp) exists. The script is called c:\scripts\startup.bat, and works fine if I run it by hand.

    Read the article

  • IPsec tunnel to Android device not created even though there is an IKE SA

    - by Quentin Swain
    I'm trying to configure a VPN tunnel between an Android device running 4.1 and a Fedora 17 Linux box running strongSwan 5.0. The device reports that it is connected and strongSwan statusall returns that there is an IKE SA, but doesn't display a tunnel. I used the instructions for iOS in the wiki to generate certificates and configure strongSwan. Since Android uses a modified version of racoon this should work and since the connection is partly established I think I am on the right track. I don't see any errors about not being able to create the tunnel. This is the configuration for the strongSwan connection conn android2 keyexchange=ikev1 authby=xauthrsasig xauth=server left=96.244.142.28 leftsubnet=0.0.0.0/0 leftfirewall=yes leftcert=serverCert.pem right=%any rightsubnet=10.0.0.0/24 rightsourceip=10.0.0.2 rightcert=clientCert.pem ike=aes256-sha1-modp1024 auto=add This is the output of strongswan statusall Status of IKE charon daemon (strongSwan 5.0.0, Linux 3.3.4-5.fc17.x86_64, x86_64): uptime: 20 minutes, since Oct 31 10:27:31 2012 malloc: sbrk 270336, mmap 0, used 198144, free 72192 worker threads: 8 of 16 idle, 7/1/0/0 working, job queue: 0/0/0/0, scheduled: 7 loaded plugins: charon aes des sha1 sha2 md5 random nonce x509 revocation constraints pubkey pkcs1 pkcs8 pgp dnskey pem openssl fips-prf gmp xcbc cmac hmac attr kernel-netlink resolve socket-default stroke updown xauth-generic Virtual IP pools (size/online/offline): android-hybrid: 1/0/0 android2: 1/1/0 Listening IP addresses: 96.244.142.28 Connections: android-hybrid: %any...%any IKEv1 android-hybrid: local: [C=CH, O=strongSwan, CN=vpn.strongswan.org] uses public key authentication android-hybrid: cert: "C=CH, O=strongSwan, CN=vpn.strongswan.org" android-hybrid: remote: [%any] uses XAuth authentication: any android-hybrid: child: dynamic === dynamic TUNNEL android2: 96.244.142.28...%any IKEv1 android2: local: [C=CH, O=strongSwan, CN=vpn.strongswan.org] uses public key authentication android2: cert: "C=CH, O=strongSwan, CN=vpn.strongswan.org" android2: remote: [C=CH, O=strongSwan, CN=client] uses public key authentication android2: cert: "C=CH, O=strongSwan, CN=client" android2: remote: [%any] uses XAuth authentication: any android2: child: 0.0.0.0/0 === 10.0.0.0/24 TUNNEL Security Associations (1 up, 0 connecting): android2[3]: ESTABLISHED 10 seconds ago, 96.244.142.28[C=CH, O=strongSwan, CN=vpn.strongswan.org]...208.54.35.241[C=CH, O=strongSwan, CN=client] android2[3]: Remote XAuth identity: android android2[3]: IKEv1 SPIs: 4151e371ad46b20d_i 59a56390d74792d2_r*, public key reauthentication in 56 minutes android2[3]: IKE proposal: AES_CBC_256/HMAC_SHA1_96/PRF_HMAC_SHA1/MODP_1024 The output of ip -s xfrm policy src ::/0 dst ::/0 uid 0 socket in action allow index 3851 priority 0 ptype main share any flag (0x00000000) lifetime config: limit: soft 0(bytes), hard 0(bytes) limit: soft 0(packets), hard 0(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:29:08 use - src ::/0 dst ::/0 uid 0 socket out action allow index 3844 priority 0 ptype main share any flag (0x00000000) lifetime config: limit: soft 0(bytes), hard 0(bytes) limit: soft 0(packets), hard 0(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:29:08 use - src ::/0 dst ::/0 uid 0 socket in action allow index 3835 priority 0 ptype main share any flag (0x00000000) lifetime config: limit: soft 0(bytes), hard 0(bytes) limit: soft 0(packets), hard 0(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:29:08 use - src ::/0 dst ::/0 uid 0 socket out action allow index 3828 priority 0 ptype main share any flag (0x00000000) lifetime config: limit: soft 0(bytes), hard 0(bytes) limit: soft 0(packets), hard 0(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:29:08 use - src 0.0.0.0/0 dst 0.0.0.0/0 uid 0 socket in action allow index 3819 priority 0 ptype main share any flag (0x00000000) lifetime config: limit: soft 0(bytes), hard 0(bytes) limit: soft 0(packets), hard 0(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:29:08 use 2012-10-31 13:29:39 src 0.0.0.0/0 dst 0.0.0.0/0 uid 0 socket out action allow index 3812 priority 0 ptype main share any flag (0x00000000) lifetime config: limit: soft 0(bytes), hard 0(bytes) limit: soft 0(packets), hard 0(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:29:08 use 2012-10-31 13:29:22 src 0.0.0.0/0 dst 0.0.0.0/0 uid 0 socket in action allow index 3803 priority 0 ptype main share any flag (0x00000000) lifetime config: limit: soft 0(bytes), hard 0(bytes) limit: soft 0(packets), hard 0(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:29:08 use 2012-10-31 13:29:20 src 0.0.0.0/0 dst 0.0.0.0/0 uid 0 socket out action allow index 3796 priority 0 ptype main share any flag (0x00000000) lifetime config: limit: soft 0(bytes), hard 0(bytes) limit: soft 0(packets), hard 0(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:29:08 use 2012-10-31 13:29:20 So a xfrm policy isn't being created for the connection, even though there is an SA between device and strongswan. Executing ip -s xfrm policy on the android device results in the following output: src 0.0.0.0/0 dst 10.0.0.2/32 uid 0 dir in action allow index 40 priority 2147483648 share any flag (0x00000000) lifetime config: limit: soft (INF)(bytes), hard (INF)(bytes) limit: soft (INF)(packets), hard (INF)(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:42:08 use - tmpl src 96.244.142.28 dst 25.239.33.30 proto esp spi 0x00000000(0) reqid 0(0x00000000) mode tunnel level required share any enc-mask 00000000 auth-mask 00000000 comp-mask 00000000 src 10.0.0.2/32 dst 0.0.0.0/0 uid 0 dir out action allow index 33 priority 2147483648 share any flag (0x00000000) lifetime config: limit: soft (INF)(bytes), hard (INF)(bytes) limit: soft (INF)(packets), hard (INF)(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:42:08 use - tmpl src 25.239.33.30 dst 96.244.142.28 proto esp spi 0x00000000(0) reqid 0(0x00000000) mode tunnel level required share any enc-mask 00000000 auth-mask 00000000 comp-mask 00000000 src 0.0.0.0/0 dst 0.0.0.0/0 uid 0 dir 4 action allow index 28 priority 0 share any flag (0x00000000) lifetime config: limit: soft (INF)(bytes), hard (INF)(bytes) limit: soft (INF)(packets), hard (INF)(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:42:04 use 2012-10-31 13:42:08 src 0.0.0.0/0 dst 0.0.0.0/0 uid 0 dir 3 action allow index 19 priority 0 share any flag (0x00000000) lifetime config: limit: soft (INF)(bytes), hard (INF)(bytes) limit: soft (INF)(packets), hard (INF)(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:42:04 use 2012-10-31 13:42:08 src 0.0.0.0/0 dst 0.0.0.0/0 uid 0 dir 4 action allow index 12 priority 0 share any flag (0x00000000) lifetime config: limit: soft (INF)(bytes), hard (INF)(bytes) limit: soft (INF)(packets), hard (INF)(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:42:04 use 2012-10-31 13:42:06 src 0.0.0.0/0 dst 0.0.0.0/0 uid 0 dir 3 action allow index 3 priority 0 share any flag (0x00000000) lifetime config: limit: soft (INF)(bytes), hard (INF)(bytes) limit: soft (INF)(packets), hard (INF)(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:42:04 use 2012-10-31 13:42:07 Logs from charon: 00[DMN] Starting IKE charon daemon (strongSwan 5.0.0, Linux 3.3.4-5.fc17.x86_64, x86_64) 00[KNL] listening on interfaces: 00[KNL] em1 00[KNL] 96.244.142.28 00[KNL] fe80::224:e8ff:fed2:18b2 00[CFG] loading ca certificates from '/etc/strongswan/ipsec.d/cacerts' 00[CFG] loaded ca certificate "C=CH, O=strongSwan, CN=strongSwan CA" from '/etc/strongswan/ipsec.d/cacerts/caCert.pem' 00[CFG] loading aa certificates from '/etc/strongswan/ipsec.d/aacerts' 00[CFG] loading ocsp signer certificates from '/etc/strongswan/ipsec.d/ocspcerts' 00[CFG] loading attribute certificates from '/etc/strongswan/ipsec.d/acerts' 00[CFG] loading crls from '/etc/strongswan/ipsec.d/crls' 00[CFG] loading secrets from '/etc/strongswan/ipsec.secrets' 00[CFG] loaded RSA private key from '/etc/strongswan/ipsec.d/private/clientKey.pem' 00[CFG] loaded IKE secret for %any 00[CFG] loaded EAP secret for android 00[CFG] loaded EAP secret for android 00[DMN] loaded plugins: charon aes des sha1 sha2 md5 random nonce x509 revocation constraints pubkey pkcs1 pkcs8 pgp dnskey pem openssl fips-prf gmp xcbc cmac hmac attr kernel-netlink resolve socket-default stroke updown xauth-generic 08[NET] waiting for data on sockets 16[LIB] created thread 16 [15338] 16[JOB] started worker thread 16 11[CFG] received stroke: add connection 'android-hybrid' 11[CFG] conn android-hybrid 11[CFG] left=%any 11[CFG] leftsubnet=(null) 11[CFG] leftsourceip=(null) 11[CFG] leftauth=pubkey 11[CFG] leftauth2=(null) 11[CFG] leftid=(null) 11[CFG] leftid2=(null) 11[CFG] leftrsakey=(null) 11[CFG] leftcert=serverCert.pem 11[CFG] leftcert2=(null) 11[CFG] leftca=(null) 11[CFG] leftca2=(null) 11[CFG] leftgroups=(null) 11[CFG] leftupdown=ipsec _updown iptables 11[CFG] right=%any 11[CFG] rightsubnet=(null) 11[CFG] rightsourceip=96.244.142.3 11[CFG] rightauth=xauth 11[CFG] rightauth2=(null) 11[CFG] rightid=%any 11[CFG] rightid2=(null) 11[CFG] rightrsakey=(null) 11[CFG] rightcert=(null) 11[CFG] rightcert2=(null) 11[CFG] rightca=(null) 11[CFG] rightca2=(null) 11[CFG] rightgroups=(null) 11[CFG] rightupdown=(null) 11[CFG] eap_identity=(null) 11[CFG] aaa_identity=(null) 11[CFG] xauth_identity=(null) 11[CFG] ike=aes256-sha1-modp1024 11[CFG] esp=aes128-sha1-modp2048,3des-sha1-modp1536 11[CFG] dpddelay=30 11[CFG] dpdtimeout=150 11[CFG] dpdaction=0 11[CFG] closeaction=0 11[CFG] mediation=no 11[CFG] mediated_by=(null) 11[CFG] me_peerid=(null) 11[CFG] keyexchange=ikev1 11[KNL] getting interface name for %any 11[KNL] %any is not a local address 11[KNL] getting interface name for %any 11[KNL] %any is not a local address 11[CFG] left nor right host is our side, assuming left=local 11[CFG] loaded certificate "C=CH, O=strongSwan, CN=vpn.strongswan.org" from 'serverCert.pem' 11[CFG] id '%any' not confirmed by certificate, defaulting to 'C=CH, O=strongSwan, CN=vpn.strongswan.org' 11[CFG] added configuration 'android-hybrid' 11[CFG] adding virtual IP address pool 'android-hybrid': 96.244.142.3/32 13[CFG] received stroke: add connection 'android2' 13[CFG] conn android2 13[CFG] left=96.244.142.28 13[CFG] leftsubnet=0.0.0.0/0 13[CFG] leftsourceip=(null) 13[CFG] leftauth=pubkey 13[CFG] leftauth2=(null) 13[CFG] leftid=(null) 13[CFG] leftid2=(null) 13[CFG] leftrsakey=(null) 13[CFG] leftcert=serverCert.pem 13[CFG] leftcert2=(null) 13[CFG] leftca=(null) 13[CFG] leftca2=(null) 13[CFG] leftgroups=(null) 13[CFG] leftupdown=ipsec _updown iptables 13[CFG] right=%any 13[CFG] rightsubnet=10.0.0.0/24 13[CFG] rightsourceip=10.0.0.2 13[CFG] rightauth=pubkey 13[CFG] rightauth2=xauth 13[CFG] rightid=(null) 13[CFG] rightid2=(null) 13[CFG] rightrsakey=(null) 13[CFG] rightcert=clientCert.pem 13[CFG] rightcert2=(null) 13[CFG] rightca=(null) 13[CFG] rightca2=(null) 13[CFG] rightgroups=(null) 13[CFG] rightupdown=(null) 13[CFG] eap_identity=(null) 13[CFG] aaa_identity=(null) 13[CFG] xauth_identity=(null) 13[CFG] ike=aes256-sha1-modp1024 13[CFG] esp=aes128-sha1-modp2048,3des-sha1-modp1536 13[CFG] dpddelay=30 13[CFG] dpdtimeout=150 13[CFG] dpdaction=0 13[CFG] closeaction=0 13[CFG] mediation=no 13[CFG] mediated_by=(null) 13[CFG] me_peerid=(null) 13[CFG] keyexchange=ikev0 13[KNL] getting interface name for %any 13[KNL] %any is not a local address 13[KNL] getting interface name for 96.244.142.28 13[KNL] 96.244.142.28 is on interface em1 13[CFG] loaded certificate "C=CH, O=strongSwan, CN=vpn.strongswan.org" from 'serverCert.pem' 13[CFG] id '96.244.142.28' not confirmed by certificate, defaulting to 'C=CH, O=strongSwan, CN=vpn.strongswan.org' 13[CFG] loaded certificate "C=CH, O=strongSwan, CN=client" from 'clientCert.pem' 13[CFG] id '%any' not confirmed by certificate, defaulting to 'C=CH, O=strongSwan, CN=client' 13[CFG] added configuration 'android2' 13[CFG] adding virtual IP address pool 'android2': 10.0.0.2/32 08[NET] received packet: from 208.54.35.241[32235] to 96.244.142.28[500] 15[CFG] looking for an ike config for 96.244.142.28...208.54.35.241 15[CFG] candidate: %any...%any, prio 2 15[CFG] candidate: 96.244.142.28...%any, prio 5 15[CFG] found matching ike config: 96.244.142.28...%any with prio 5 01[JOB] next event in 29s 999ms, waiting 15[IKE] received NAT-T (RFC 3947) vendor ID 15[IKE] received draft-ietf-ipsec-nat-t-ike-02 vendor ID 15[IKE] received draft-ietf-ipsec-nat-t-ike-02\n vendor ID 15[IKE] received draft-ietf-ipsec-nat-t-ike-00 vendor ID 15[IKE] received XAuth vendor ID 15[IKE] received Cisco Unity vendor ID 15[IKE] received DPD vendor ID 15[IKE] 208.54.35.241 is initiating a Main Mode IKE_SA 15[IKE] IKE_SA (unnamed)[1] state change: CREATED => CONNECTING 15[CFG] selecting proposal: 15[CFG] proposal matches 15[CFG] received proposals: IKE:AES_CBC_256/HMAC_SHA1_96/PRF_HMAC_SHA1/MODP_1024, IKE:AES_CBC_256/HMAC_MD5_96/PRF_HMAC_MD5/MODP_1024, IKE:AES_CBC_128/HMAC_SHA1_96/PRF_HMAC_SHA1/MODP_1024, IKE:AES_CBC_128/HMAC_MD5_96/PRF_HMAC_MD5/MODP_1024, IKE:3DES_CBC/HMAC_SHA1_96/PRF_HMAC_SHA1/MODP_1024, IKE:3DES_CBC/HMAC_MD5_96/PRF_HMAC_MD5/MODP_1024, IKE:DES_CBC/HMAC_SHA1_96/PRF_HMAC_SHA1/MODP_1024, IKE:DES_CBC/HMAC_MD5_96/PRF_HMAC_MD5/MODP_1024 15[CFG] configured proposals: IKE:AES_CBC_256/HMAC_SHA1_96/PRF_HMAC_SHA1/MODP_1024, IKE:AES_CBC_128/AES_CBC_192/AES_CBC_256/3DES_CBC/CAMELLIA_CBC_128/CAMELLIA_CBC_192/CAMELLIA_CBC_256/HMAC_MD5_96/HMAC_SHA1_96/HMAC_SHA2_256_128/HMAC_SHA2_384_192/HMAC_SHA2_512_256/AES_XCBC_96/AES_CMAC_96/PRF_HMAC_MD5/PRF_HMAC_SHA1/PRF_HMAC_SHA2_256/PRF_HMAC_SHA2_384/PRF_HMAC_SHA2_512/PRF_AES128_XCBC/PRF_AES128_CMAC/MODP_2048/MODP_2048_224/MODP_2048_256/MODP_1536/MODP_4096/MODP_8192/MODP_1024/MODP_1024_160 15[CFG] selected proposal: IKE:AES_CBC_256/HMAC_SHA1_96/PRF_HMAC_SHA1/MODP_1024 15[NET] sending packet: from 96.244.142.28[500] to 208.54.35.241[32235] 04[NET] sending packet: from 96.244.142.28[500] to 208.54.35.241[32235] 15[MGR] checkin IKE_SA (unnamed)[1] 15[MGR] check-in of IKE_SA successful. 08[NET] received packet: from 208.54.35.241[32235] to 96.244.142.28[500] 08[NET] waiting for data on sockets 07[MGR] checkout IKE_SA by message 07[MGR] IKE_SA (unnamed)[1] successfully checked out 07[NET] received packet: from 208.54.35.241[32235] to 96.244.142.28[500] 07[LIB] size of DH secret exponent: 1023 bits 07[IKE] remote host is behind NAT 07[IKE] sending cert request for "C=CH, O=strongSwan, CN=strongSwan CA" 07[ENC] generating NAT_D_V1 payload finished 07[NET] sending packet: from 96.244.142.28[500] to 208.54.35.241[32235] 07[MGR] checkin IKE_SA (unnamed)[1] 07[MGR] check-in of IKE_SA successful. 04[NET] sending packet: from 96.244.142.28[500] to 208.54.35.241[32235] 08[NET] received packet: from 208.54.35.241[35595] to 96.244.142.28[4500] 10[IKE] ignoring certificate request without data 10[IKE] received end entity cert "C=CH, O=strongSwan, CN=client" 10[CFG] looking for XAuthInitRSA peer configs matching 96.244.142.28...208.54.35.241[C=CH, O=strongSwan, CN=client] 10[CFG] candidate "android-hybrid", match: 1/1/2/2 (me/other/ike/version) 10[CFG] candidate "android2", match: 1/20/5/1 (me/other/ike/version) 10[CFG] selected peer config "android2" 10[CFG] certificate "C=CH, O=strongSwan, CN=client" key: 2048 bit RSA 10[CFG] using trusted ca certificate "C=CH, O=strongSwan, CN=strongSwan CA" 10[CFG] checking certificate status of "C=CH, O=strongSwan, CN=client" 10[CFG] ocsp check skipped, no ocsp found 10[CFG] certificate status is not available 10[CFG] certificate "C=CH, O=strongSwan, CN=strongSwan CA" key: 2048 bit RSA 10[CFG] reached self-signed root ca with a path length of 0 10[CFG] using trusted certificate "C=CH, O=strongSwan, CN=client" 10[IKE] authentication of 'C=CH, O=strongSwan, CN=client' with RSA successful 10[ENC] added payload of type ID_V1 to message 10[ENC] added payload of type SIGNATURE_V1 to message 10[IKE] authentication of 'C=CH, O=strongSwan, CN=vpn.strongswan.org' (myself) successful 10[IKE] queueing XAUTH task 10[IKE] sending end entity cert "C=CH, O=strongSwan, CN=vpn.strongswan.org" 10[NET] sending packet: from 96.244.142.28[4500] to 208.54.35.241[35595] 04[NET] sending packet: from 96.244.142.28[4500] to 208.54.35.241[35595] 10[IKE] activating new tasks 10[IKE] activating XAUTH task 10[NET] sending packet: from 96.244.142.28[4500] to 208.54.35.241[35595] 04[NET] sending packet: from 96.244.142.28[4500] to 208.54.35.241[35595] 01[JOB] next event in 3s 999ms, waiting 10[MGR] checkin IKE_SA android2[1] 10[MGR] check-in of IKE_SA successful. 08[NET] received packet: from 208.54.35.241[35595] to 96.244.142.28[4500] 08[NET] waiting for data on sockets 12[MGR] checkout IKE_SA by message 12[MGR] IKE_SA android2[1] successfully checked out 12[NET] received packet: from 208.54.35.241[35595] to 96.244.142.28[4500] 12[MGR] checkin IKE_SA android2[1] 12[MGR] check-in of IKE_SA successful. 08[NET] received packet: from 208.54.35.241[35595] to 96.244.142.28[4500] 16[MGR] checkout IKE_SA by message 16[MGR] IKE_SA android2[1] successfully checked out 16[NET] received packet: from 208.54.35.241[35595] to 96.244.142.28[4500] 08[NET] waiting for data on sockets 16[IKE] XAuth authentication of 'android' successful 16[IKE] reinitiating already active tasks 16[IKE] XAUTH task 16[NET] sending packet: from 96.244.142.28[4500] to 208.54.35.241[35595] 04[NET] sending packet: from 96.244.142.28[4500] to 208.54.35.241[35595] 16[MGR] checkin IKE_SA android2[1] 01[JOB] next event in 3s 907ms, waiting 16[MGR] check-in of IKE_SA successful. 08[NET] received packet: from 208.54.35.241[35595] to 96.244.142.28[4500] 09[MGR] checkout IKE_SA by message 09[MGR] IKE_SA android2[1] successfully checked out 09[NET] received packet: from 208.54.35.241[35595] to 96.244.142.28[4500] .8rS 09[IKE] IKE_SA android2[1] established between 96.244.142.28[C=CH, O=strongSwan, CN=vpn.strongswan.org]...208.54.35.241[C=CH, O=strongSwan, CN=client] 09[IKE] IKE_SA android2[1] state change: CONNECTING => ESTABLISHED 09[IKE] scheduling reauthentication in 3409s 09[IKE] maximum IKE_SA lifetime 3589s 09[IKE] activating new tasks 09[IKE] nothing to initiate 09[MGR] checkin IKE_SA android2[1] 09[MGR] check-in of IKE_SA successful. 09[MGR] checkout IKE_SA 09[MGR] IKE_SA android2[1] successfully checked out 09[MGR] checkin IKE_SA android2[1] 09[MGR] check-in of IKE_SA successful. 01[JOB] next event in 3s 854ms, waiting 08[NET] waiting for data on sockets 08[NET] received packet: from 208.54.35.241[35595] to 96.244.142.28[4500] 14[MGR] checkout IKE_SA by message 14[MGR] IKE_SA android2[1] successfully checked out 14[NET] received packet: from 208.54.35.241[35595] to 96.244.142.28[4500] 14[IKE] processing INTERNAL_IP4_ADDRESS attribute 14[IKE] processing INTERNAL_IP4_NETMASK attribute 14[IKE] processing INTERNAL_IP4_DNS attribute 14[IKE] processing INTERNAL_IP4_NBNS attribute 14[IKE] processing UNITY_BANNER attribute 14[IKE] processing UNITY_DEF_DOMAIN attribute 14[IKE] processing UNITY_SPLITDNS_NAME attribute 14[IKE] processing UNITY_SPLIT_INCLUDE attribute 14[IKE] processing UNITY_LOCAL_LAN attribute 14[IKE] processing APPLICATION_VERSION attribute 14[IKE] peer requested virtual IP %any 14[CFG] assigning new lease to 'android' 14[IKE] assigning virtual IP 10.0.0.2 to peer 'android' 14[NET] sending packet: from 96.244.142.28[4500] to 208.54.35.241[35595] 14[MGR] checkin IKE_SA android2[1] 14[MGR] check-in of IKE_SA successful. 04[NET] sending packet: from 96.244.142.28[4500] to 208.54.35.241[35595] 08[NET] waiting for data on sockets 01[JOB] got event, queuing job for execution 01[JOB] next event in 91ms, waiting 13[MGR] checkout IKE_SA 13[MGR] IKE_SA android2[1] successfully checked out 13[MGR] checkin IKE_SA android2[1] 13[MGR] check-in of IKE_SA successful. 01[JOB] got event, queuing job for execution 01[JOB] next event in 24s 136ms, waiting 15[MGR] checkout IKE_SA 15[MGR] IKE_SA android2[1] successfully checked out 15[MGR] checkin IKE_SA android2[1] 15[MGR] check-in of IKE_SA successful.

    Read the article

  • apache 2.4 php-fpm proxypassmatch for pretty urls

    - by tubaguy50035
    I have a URL like http://newsymfony.dev/app_dev.php/_profiler/5080653d965eb. I would like to send this script to PHP-FPM. I currently have this as my vhost: VirtualHost *:80> ServerName newsymfony.dev DocumentRoot /home/COMPANY/nwalke/www/newsymfony.dev/web/ ErrorLog /var/log/apache2/error_log LogLevel info CustomLog /var/log/apache2/access_log combined <Directory /home/COMPANY/nwalke/www/newsymfony.dev/web/> AllowOverride All Require all granted DirectoryIndex app.php </Directory> ProxyPassMatch ^/(.*\.php)$ fcgi://127.0.0.1:9003/home/COMPANY/nwalke/www/newsymfony.dev/web/$1 </VirtualHost> If I browse to app_dev.php it works just fine. But if I do app_dev.php/_profiler/5080653d965eb I get a 404 and the request never gets sent to FPM. How can I alter my ProxyPassMatch to pass anything with .php in the URL? I'm trying to do this with Symfony, but I'm pretty sure it applies to everything.

    Read the article

  • php-cgi.exe process on IIS

    - by HYP
    The production server runs a PHP application on IIS 6.0. During the peak hours we have had a few issues where the php-cgi.exe processes increase in numbers and approach around 200. The server comes to a crawl and we have to restart the server a multiple times to restore the normal behavior. When the server is running normally, I have noticed that there are only 10-15 php-cgi.exe processes in the task manager. What could be causing the php-cgi.exe processes to increase in number from 10-15 to around 200 during the peak hours? Where should I look for a cause?

    Read the article

  • mysql master-slave setup with synchronous replication

    - by imaginative
    I have a very trivial mysql master-slave setup going on between two servers. The problem is, replication is asynchronous, and this can cause issues (even on a low latency link), if the master server was to crash after a COMMIT before the replication thread from the slave was able to fetch the last bin log. Is there anyway to force mysql to do synchronous commits so that data consistency is guaranteed in a mysql-slave relationship?

    Read the article

  • How do I remove a root kit from Windows XP?

    - by Chloe
    I was looking for root kits following these instructions http://computersight.com/software/how-to-manually-remove-rootkit/ and saw this in my boot log: Loaded driver \SystemRoot\System32\Drivers\awhk9fmc.SYS I tried to search for that filename in Google but there was absolutely nothing found. I tried to look at the file on the disk but could not find it. Nearly every other file is there. I even tried to boot in Windows 98 and mount the NTFS and see the file, but it still wasn't there. I ran a full scan with Microsoft Security Essentials but it found nothing. When I rebooted, I saw this line instead: Loaded driver \SystemRoot\System32\Drivers\a6n163gl.SYS How can I remove this? How can I find out what it does? How can I find out when it was put in? How can I find out who wrote it? Here is my full boot log: Service Pack 3 10 31 2012 17:35:36.500 Loaded driver \WINDOWS\system32\ntoskrnl.exe Loaded driver \WINDOWS\system32\hal.dll Loaded driver \WINDOWS\system32\KDCOM.DLL Loaded driver \WINDOWS\system32\BOOTVID.dll Loaded driver sptd.sys Loaded driver ACPI.sys Loaded driver \WINDOWS\system32\DRIVERS\WMILIB.SYS Loaded driver pci.sys Loaded driver isapnp.sys Loaded driver pciide.sys Loaded driver \WINDOWS\system32\DRIVERS\PCIIDEX.SYS Loaded driver MountMgr.sys Loaded driver ftdisk.sys Loaded driver PartMgr.sys Loaded driver VolSnap.sys Loaded driver atapi.sys Loaded driver disk.sys Loaded driver \WINDOWS\system32\DRIVERS\CLASSPNP.SYS Loaded driver fltmgr.sys Loaded driver sr.sys Loaded driver MpFilter.sys Loaded driver KSecDD.sys Loaded driver WudfPf.sys Loaded driver Ntfs.sys Loaded driver NDIS.sys Loaded driver uagp35.sys Loaded driver Mup.sys Loaded driver \SystemRoot\system32\DRIVERS\amdk7.sys Loaded driver \SystemRoot\system32\DRIVERS\sisgrp.sys Loaded driver \SystemRoot\system32\DRIVERS\i8042prt.sys Loaded driver \SystemRoot\system32\DRIVERS\mouclass.sys Loaded driver \SystemRoot\system32\DRIVERS\kbdclass.sys Loaded driver \SystemRoot\system32\DRIVERS\imapi.sys Loaded driver \SystemRoot\system32\DRIVERS\cdrom.sys Loaded driver \SystemRoot\system32\DRIVERS\redbook.sys Loaded driver \SystemRoot\system32\DRIVERS\GEARAspiWDM.sys Loaded driver \SystemRoot\system32\drivers\cmuda.sys Loaded driver \SystemRoot\system32\DRIVERS\usbohci.sys Loaded driver \SystemRoot\system32\DRIVERS\usbehci.sys Loaded driver \SystemRoot\system32\DRIVERS\sisnicxp.sys Loaded driver \SystemRoot\System32\Drivers\avzk9sf5.SYS Loaded driver \SystemRoot\system32\DRIVERS\fdc.sys Loaded driver \SystemRoot\system32\DRIVERS\serial.sys Loaded driver \SystemRoot\system32\DRIVERS\serenum.sys Loaded driver \SystemRoot\system32\DRIVERS\parport.sys Loaded driver \SystemRoot\system32\DRIVERS\gameenum.sys Loaded driver \SystemRoot\system32\DRIVERS\serscan.sys Loaded driver \SystemRoot\system32\drivers\DrmCAudio.sys Loaded driver \SystemRoot\system32\DRIVERS\audstub.sys Loaded driver \SystemRoot\system32\DRIVERS\rasl2tp.sys Loaded driver \SystemRoot\system32\DRIVERS\ndistapi.sys Loaded driver \SystemRoot\system32\DRIVERS\ndiswan.sys Loaded driver \SystemRoot\system32\DRIVERS\raspppoe.sys Loaded driver \SystemRoot\system32\DRIVERS\raspptp.sys Loaded driver \SystemRoot\system32\DRIVERS\msgpc.sys Loaded driver \SystemRoot\system32\DRIVERS\psched.sys Loaded driver \SystemRoot\system32\DRIVERS\ptilink.sys Loaded driver \SystemRoot\system32\DRIVERS\raspti.sys Loaded driver \SystemRoot\system32\DRIVERS\tap0901.sys Loaded driver \SystemRoot\system32\DRIVERS\termdd.sys Loaded driver \SystemRoot\system32\DRIVERS\swenum.sys Loaded driver \SystemRoot\system32\DRIVERS\update.sys Loaded driver \SystemRoot\system32\DRIVERS\mssmbios.sys Loaded driver \SystemRoot\system32\DRIVERS\dtsoftbus01.sys Loaded driver \SystemRoot\System32\Drivers\NDProxy.SYS Did not load driver \SystemRoot\System32\Drivers\NDProxy.SYS Loaded driver \SystemRoot\system32\DRIVERS\usbhub.sys Loaded driver \SystemRoot\system32\DRIVERS\flpydisk.sys Did not load driver \SystemRoot\System32\Drivers\lbrtfdc.SYS Did not load driver \SystemRoot\System32\Drivers\Sfloppy.SYS Did not load driver \SystemRoot\System32\Drivers\i2omgmt.SYS Did not load driver \SystemRoot\System32\Drivers\Changer.SYS Did not load driver \SystemRoot\System32\Drivers\Cdaudio.SYS Loaded driver \SystemRoot\System32\Drivers\Fs_Rec.SYS Loaded driver \SystemRoot\System32\Drivers\Null.SYS Loaded driver \SystemRoot\System32\Drivers\Beep.SYS Loaded driver \SystemRoot\System32\drivers\vga.sys Loaded driver \SystemRoot\System32\Drivers\mnmdd.SYS Loaded driver \SystemRoot\System32\DRIVERS\RDPCDD.sys Loaded driver \SystemRoot\System32\Drivers\Msfs.SYS Loaded driver \SystemRoot\System32\Drivers\Npfs.SYS Loaded driver \SystemRoot\system32\DRIVERS\rasacd.sys Loaded driver \SystemRoot\system32\DRIVERS\ipsec.sys Loaded driver \SystemRoot\system32\DRIVERS\tcpip.sys Loaded driver \SystemRoot\system32\DRIVERS\netbt.sys Loaded driver \SystemRoot\System32\drivers\afd.sys Loaded driver \SystemRoot\system32\DRIVERS\netbios.sys Did not load driver \SystemRoot\System32\Drivers\PCIDump.SYS Loaded driver \SystemRoot\system32\DRIVERS\srvkp.sys Loaded driver \SystemRoot\system32\DRIVERS\rdbss.sys Loaded driver \SystemRoot\system32\DRIVERS\mrxsmb.sys Loaded driver Loaded driver \SystemRoot\system32\DRIVERS\ipnat.sys Loaded driver \SystemRoot\system32\DRIVERS\wanarp.sys Loaded driver \SystemRoot\System32\Drivers\Fips.SYS Loaded driver \SystemRoot\system32\DRIVERS\ctxusbm.sys Loaded driver \??\C:\WINDOWS\system32\drivers\cbfs3.sys Loaded driver \SystemRoot\System32\Drivers\Fastfat.SYS Loaded driver \SystemRoot\System32\Drivers\Cdfs.SYS Did not load driver \SystemRoot\system32\DRIVERS\rdbss.sys Did not load driver \SystemRoot\system32\DRIVERS\mrxsmb.sys Loaded driver \SystemRoot\system32\drivers\wdmaud.sys Loaded driver \SystemRoot\system32\drivers\sysaudio.sys Loaded driver \SystemRoot\system32\drivers\splitter.sys Loaded driver \SystemRoot\system32\drivers\aec.sys Loaded driver \SystemRoot\system32\drivers\swmidi.sys Loaded driver \SystemRoot\system32\drivers\DMusic.sys Loaded driver \SystemRoot\system32\drivers\kmixer.sys Loaded driver \SystemRoot\system32\drivers\drmkaud.sys Loaded driver \SystemRoot\system32\DRIVERS\mrxdav.sys Loaded driver \SystemRoot\System32\Drivers\ParVdm.SYS Did not load driver \SystemRoot\System32\Drivers\StarOpen.SYS Loaded driver \SystemRoot\system32\DRIVERS\srv.sys Did not load driver \SystemRoot\system32\DRIVERS\ipnat.sys Loaded driver \SystemRoot\System32\Drivers\HTTP.sys

    Read the article

  • How do I use novnc on CentOS 6?

    - by hyphen this
    I came across novnc in a yum search, and wanted to use it so I installed. However, there is no information on how to actually use it. The novnc_server command exits with "Could not find vnc.html". The man page and --help menu are of no help. The README on github says: "Use the launch script to start a mini-webserver and the WebSockets proxy (websockify)." Which is also, of no help. The fedora and CentOS wiki have no info.

    Read the article

  • Windows 8 Task Manager RAM Usage Accuracy

    - by user264892
    The new Task Manager has a great UI in windows 8, however, there are some discrepancies in the data I can not account for: Machine: 8 GB of total ram. (This is a physical machine, not a virtual) The processes tab shows 45% of Memory utilized. The listed process do not add up to 3.5 GB of RAM, but instead add up to 0.948 GB. There is no "processes for all users" option. The performance Tab Shows: In use : 3.6 GB Available: 4.4 GB Committed : 4.1 /9.2 GB Cached: 3.7 GB Paged Pool: 376 MB Non-paged pool: 135 MB My reading of this says I have ALOT of "cloaked" processes running some where eating my ram. How do I interpret this data and how do I verify it?

    Read the article

  • Vim digraphs is not working

    - by Hauleth
    I've tried to input digraphs in Vim (without vi compatibility), and unfortunately I can't. After using ControlKP * it should input big greek pi letter. I've also tried using PBS * with :set digraph, but no success either. My gvim --version output: VIM - Vi IMproved 7.3 (2010 Aug 15, compiled Oct 23 2012 18:42:18) Included patches: 1-712 Compiled by ArchLinux Big version with GTK2 GUI. Features included (+) or not (-): +arabic +autocmd +balloon_eval +browse ++builtin_terms +byte_offset +cindent +clientserver +clipboard +cmdline_compl +cmdline_hist +cmdline_info +comments +conceal +cryptv +cscope +cursorbind +cursorshape +dialog_con_gui +diff +digraphs +dnd -ebcdic +emacs_tags +eval +ex_extra +extra_search +farsi +file_in_path +find_in_path +float +folding -footer +fork() +gettext -hangul_input +iconv +insert_expand +jumplist +keymap +langmap +libcall +linebreak +lispindent +listcmds +localmap +lua +menu +mksession +modify_fname +mouse +mouseshape +mouse_dec +mouse_gpm -mouse_jsbterm +mouse_netterm +mouse_sgr -mouse_sysmouse +mouse_urxvt +mouse_xterm +multi_byte +multi_lang -mzscheme +netbeans_intg +path_extra +perl +persistent_undo +postscript +printer -profile +python -python3 +quickfix +reltime +rightleft +ruby +scrollbind +signs +smartindent -sniff +startuptime +statusline -sun_workshop +syntax +tag_binary +tag_old_static -tag_any_white -tcl +terminfo +termresponse +textobjects +title +toolbar +user_commands +vertsplit +virtualedit +visual +visualextra +viminfo +vreplace +wildignore +wildmenu +windows +writebackup +X11 -xfontset +xim +xsmp_interact +xterm_clipboard -xterm_save system vimrc file: "/etc/vimrc" user vimrc file: "$HOME/.vimrc" user exrc file: "$HOME/.exrc" system gvimrc file: "/etc/gvimrc" user gvimrc file: "$HOME/.gvimrc" system menu file: "$VIMRUNTIME/menu.vim" fall-back for $VIM: "/usr/share/vim" Compilation: gcc -c -I. -Iproto -DHAVE_CONFIG_H -DFEAT_GUI_GTK -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng15 -I/usr/local/include -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=1 Linking: gcc -L. -Wl,-O1,--sort-common,--as-needed,-z,relro -rdynamic -Wl,-export-dynamic -Wl,-E -Wl,-rpath,/usr/lib/perl5/core_perl/CORE -Wl,-O1,--sort-common,--as-needed,-z,relro -L/usr/local/lib -Wl,--as-needed -o vim -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgio-2.0 -lpangoft2-1.0 -lpangocairo-1.0 -lgdk_pixbuf-2.0 -lcairo -lpango-1.0 -lfreetype -lfontconfig -lgobject-2.0 -lglib-2.0 -lSM -lICE -lXt -lX11 -lXdmcp -lSM -lICE -lm -lncurses -lnsl -lacl -lattr -lgpm -ldl -L/usr/lib -llua -Wl,-E -Wl,-rpath,/usr/lib/perl5/core_perl/CORE -Wl,-O1,--sort-common,--as-needed,-z,relro -fstack-protector -L/usr/local/lib -L/usr/lib/perl5/core_perl/CORE -lperl -lnsl -ldl -lm -lcrypt -lutil -lpthread -lc -L/usr/lib/python2.7/config -lpython2.7 -lpthread -ldl -lutil -lm -Xlinker -export-dynamic -lruby -lpthread -lrt -ldl -lcrypt -lm -L/usr/lib Can you tell me how to get my ControlK digraphs work? EDIT: Output of :verbose set enc? fenc? is: encoding=utf-8 Last set from ~/.vimrc fileencoding=

    Read the article

  • Photoshop changes colors when moved to a different monitor

    - by Jason
    This Yahoo! answers question pretty much sums up my predicament. Unfortunately I haven't really found an actual answer. Here's a screen shot of what happens when I place Photoshop between my monitors. Imagine that the left side of my laptop is the right square and the yellow is the right side of my monitor. When I move the program to one side fully or the other, it takes on the corresponding color. Obviously the color on the right is correct and Photoshop is changing the color of the image when it moves to my external monitor. Also notice how none of the tools or anything are different colors, just the actual image itself. How do I fix this? EDIT You may also notice that the color palette in the left corner is showing that yellow tinge. I didn't actually pick that yellow color, it's supposed to be showing the grey on the left that I used to fill in the square.

    Read the article

  • Windows 8 Killed my SSDs

    - by SLaks
    I have a computer running 2 256GB Crucial M4's (CT256M4SSD2) in a RAID 0 (striped) array on an ASUS P9X79 Pro using Intel's (built-in) RAID system. I recently installed Windows 8 Pro as UEFI on this RAID array. (wiping a fully-function Windows 7 non-UEFI installation) Now, whenever the computer is left running for about an hour, the system no longer sees those drives. Since those drives contain Windows, this leads to various forms of BSODs. If I Intel RSTe (RAID manager) is running at the time, it will say that the disk backing that RAID array has been removed. Once this happens, if I reset the computer, it will no longer boot. Entering BIOS setup shows that the SATA 3 (6Gbps) ports that those disks are connected to are both empty. If I then power down the system completely, then turn it on again, the drives reappear, but the problem repeats after another hour or so. I have inconclusively determined that the problem occurs even if Windows is not running (booted into the installation environment from a UEFI flash drive) I don't think there has been any data corruption since this started happening, although I have had two strange issues with a GIT repo on that disk. sfc /ScanNow and Intel's disk check (in RSTe) both do not find anything. Does anyone know what might cause this?

    Read the article

  • Why using swap file over a SMB/NFS mounted filesystem is not possible in Linux?

    - by Avio
    I'd like to use another machine's unused RAM as swapspace for my primary Linux installation. I was just curious about performance of network ramdisks compared to local (slow) mechanical hard disks. The swapfile is on a tmpfs mountpoint and is shared through samba. However, every time I try to issue: swapon /mnt/ramswap/swapfile I get: swapon: /mnt/ramswap/swapfile: swapon failed: Invalid argument and in dmesg I read: [ 9569.806483] swapon: swapfile has holes I've tried to allocate the swapfile with dd if=/dev/zero of=swapfile bs=1024 (but also =4096 and =1048576) and with truncate -s 2G (both followed by mkswap swapfile) but the result is always the same. In this post (dated back to 2002) someone says that using a swapfile over NFS/SMB is not possible in Linux. Is this statement still valid? And if yes, what is the reason of this choice and is there any workaround to have this working?

    Read the article

< Previous Page | 466 467 468 469 470 471 472 473 474  | Next Page >