Daily Archives

Articles indexed Tuesday November 20 2012

Page 5/19 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • hosts.deny ignored by MacOSX 10.8

    - by David Holm
    I have been trying to set up my MacOS X Server, which I recently upgraded to Mountain Lion, to use denyhosts as I need to open port 22 to it. denyhosts is set up and adds entries to /etc/hosts.deny so I decided to add my laptops IP to it in order to verify that it actually works but I can still log in and my IP shows up in /private/var/log/system.log. I even rebooted the server once just to be sure there wasn't some service that had to be restarted. I tried the following entries: ALL: <my laptop's IP> sshd: <my laptop's IP> sshd: 127.0.0.1 My /etc/sshd_config has the following parameters set: UsePAM yes UseDNS no I Googled if deny.hosts has been deprecated in OSX 10.7 or 10.8 but I couldn't find any indications that it has. Any ideas of what is going wrong or if there is an alternative way to achieve the same result? Yes, a private key would solve this problem but for the time being I would like to stick to using password authentication. I also like the idea of denyhosts actually blocking access to all services running on the server and not just ssh.

    Read the article

  • send mail via smtp on debian 6?

    - by acidzombie24
    i followed this tutorial http://library.linode.com/email/exim/send-only-mta-debian-6-squeeze?format=print When i got to the end, i sent the email to [email protected]. I didnt receive it. I didnt get spam either, i got nothing. I also didnt get an error message on the console. How do i properly sent up a smtp server and send an email from it? I'll not i am testing this on my VM on my local computer. My ISP doesnt block any traffic whatsoever (which is one reason why i use them) so... what can i do? i also tried this tutorial

    Read the article

  • Server 2008 R2 & Domain Trusts - Attempt to Compromise Security

    - by SnAzBaZ
    We have two separate Active Directory domains; EUROPE and US. There is a two way trust between the domains / forests. I have a group of users called "USA Staff" that have access to certain shares on servers in the EUROPE domain and a group called "EUROPE Staff" which have access to shares in the USA domain. Recently the USA PDC was upgraded to Windows Server 2008 R2. Now when I try to access a share on a USA server from a Windows 7 workstation in the EUROPE domain I get the "Please enter your username / password" dialog box appear, with a message at the bottom: "The system has detected a possible attempt to compromise security." When I enter a username / password for a user in the USA domain, I can then access the network resource. Entering credentials for a EUROPE user however does not give me access, even though my NTFS and Share permissions are set to allow that. Windows Server 2003 / Windows Server 2008 did not have this problem, it seems to be unique to R2. I found KB938457 and opened up port 88 on the Server 2008 R2 firewall but it did not make any difference. Any other suggestions as to what to turn off in R2 to get this working again ? Thanks

    Read the article

  • Internet Sharing on Lion breaks my routing table

    - by seaders
    When in the office, I'm connected to a 192.168.1.0/24 network. When Internet Sharing is off, when I run netstat -nr the first entry shows default 192.168.1.254 UGSc 10 62 en0 If I turn Internet sharing on, it shows default link#5 UCS 2 0 en1 This is obviously incorrect and breaks all connectivity of my machine. en1 is my wireless, whereas en0 is my ethernet. If I then disable Internet Sharing, it even deletes that incorrect route, so I'm left with no default route at all. Currently I have one script that I run when I share, or after, when I disable that does route delete default route add default 192.168.1.254 That fixes everything, but I'd love to know what's actually making this happen and how to properly fix it. And just to say that at some point a few months ago, this was working absolutely perfectly, with no hitches, then one day when I brought the laptop home, I couldn't disable the internet sharing, so I couldn't connect to my home wifi. I eventually had to restart the machine and since then this problem has been happening. Any help would be greatly appreciated, thank you.

    Read the article

  • How can I retrieve a MS SQL Express Database from a non-booting computer?

    - by Redandwhite
    A client has a very important database that has not been backed up in 6 months. The PC has promptly failed. The Windows directory is corrupt, and the computer will not boot. It had a Microsoft SQL Server Express 2005 database on it. I have access to the hard drive by booting in with an Ubuntu Live CD, but I am not sure if I can find the database. I am not sure what I am looking for, or where to look either. The dead machine had Windows XP on it.

    Read the article

  • Can I mix CAT5 and CAT6?

    - by Jason94
    I'm thinking of upgrading the "backbone" of my network, taking a CAT6 cable from my router (DLINK DIR-655 (has cat6 ports)) to a gigabit swith in the tv rom (25m). I have two devices there that uses network (xbox and tvbox, both of them have cat5). Will my net be downgraded to 100mbit as max speed, or will I get 1 gigabit between my router and switch, and 100mbit between tvbox and xbox? From back in the days i have a tool to create my cat5 cable (the plug tool thingy), can I use this for my cat6 too?

    Read the article

  • Does it exists a way to do a (software) switch between DVI and VGA screens?

    - by gogolb
    I'd like to know if there is a way (a software, a keyboard combination, etc...) to switch between DVI and VGA screen on the same monitor. I've two PCs connected to the same monitor, far away (80cm) from me. To push the monitor button is not so easy and comfortable as could seems, moreover if you have to do it almost 20 times a day. I've tried to check on search engine/Samsung (SyncMaster SA450) site for a solution but with no success. Any suggestion? Thank you all in advance, gb

    Read the article

  • Google Apps bounces bulk emails

    - by znq
    I've an [email protected] email address which receives emails from clients and delivers it to various people within my company. However, since today I get the following bounce error message when sending an email to this address: Delivery to the following recipient failed permanently: [email protected] Technical details of permanent failure: Message rejected by Google Groups. Please visit http://mail.google.com/support/bin/answer.py?hl=en&answer=188131 to review our Bulk Email Senders Guidelines. The Bulk Senders Guidelines describe how to send out bulk emails. However, in my case I only receive one email and distribute it to a couple of people within my company. Same problem applies to the [email protected] email address which we use internally. Does anyone know how to resolve this issue? UPDATE: I just realized that emails coming from the outside and being sent to this address still work. It just seems to be emails coming from my domain. I found a solution and posted it below.

    Read the article

  • Acer Laptop does not power up after repairing DC power jack

    - by Misbah Mashkoor
    I have an Acer travelmate laptop which (by mistake) I dropped on the floor with the power jack side down, with the charger connected and it broke the DC jack from the inside of the laptop. Then I unscrewed the laptop and soldered the DC jack back and then plugged it in and switched on the laptop without the batteries. It did switch on, that was before screwing everything back. Then after assembling the whole thing back it does not power up. So I disassembled it again and just took the part which contained the DC jack (My laptop is like in two parts one contains the power jack which then sits on some pins on the main PCB) to a technician and he said that if you had connected this to a motherboard then it would have burnt cause the soldering was not right. And then I checked with my laptop again by connecting everything the light (the charging light) comes on when I connect the power but it does not switch on. Right now nothing is connected to the laptop; no HD, CD ROM, RAM , Battery. Nothing! Even then it does not power up. Any suggestions?

    Read the article

  • IDE to SATA convertor Motherboard Issue

    - by ravidev
    I bought new motherboard Intel DH67GD which has not IDE interface to attach the DVD writer. It has 2 SATA with 6Gb/s, 3 SATA with 3Gb/s and 1 e-SATA with 3GB/s.(mobo specs link : http://www.intel.in/content/www/us/en/motherboards/desktop-motherboards/desktop-board-dh67gd.html) Can anyone tell me how can i connect my old LG DVD Writer(IDE interface) with Mobo ?? Will IDE to SATA Connector work? If yes then how to connect that DVD writer with IDE-SATA converter? Please provide link. Thanks in advance !!

    Read the article

  • Windows 8: Different Themes or Different Wallpaper Slideshows for Multiple Monitors

    - by Robith Nuriel Haq
    I know I can assign different wallpaper for each monitor that is connected to my computer in Windows 8(by right clicking and selecting "set for monitor 1,2,etc"), but I don't know how to assign different wallpaper slideshow or different theme for each monitor. Can anyone tell me how to do that? It is quite interesting to see different wallpapers on different monitors, but seeing static wallpaper on each of those monitors is no fun. thanks

    Read the article

  • Is it possible to have a portable plotter that can print QR codes on burlap?

    - by Brian Ballsun-Stanton
    This is a hardware question. Is there a class of plotters that are portable and accept sharpies? The use case: I have a burlap sack. It will be taking very specific potsherds from an archaeological dig. It needs an indelible QR code (or bar code) printed on the burlap. (Stickers have far far too short a lifetime). It was my thought that a plotter that uses sharpies and that works in the field would be the optimal solution for this problem. Is a portable plotter the right solution? If so, who makes them? If not, what is a better solution?

    Read the article

  • Processor always at max speed

    - by Pratyush Nalam
    I am running Windows 8 Pro on an Apple MacBook Pro 9,1 Mid 2012 15 inch non retina. It has a Core i7-3720 QM CPU @ 2.6 GHz. For the past few days, I have noticed that it is constantly running at max speed which is 2.59 GHz. Before, it used to run at 1.5 - 1.8 GHz on normal usage. And, the weirder thing is that CPU usage is minimal. Screenshot: So, what is the reason for this? And is it harmful?

    Read the article

  • dmenu doesn't set environment variable as per my .bash_profile when running Emacs

    - by proofit404
    I have following ~/.bash_profile [[ -f ~/.bashrc ]] && . ~/.bashrc and ~/.bashrc ### Check for shell interactivity. if [[ $- != *i* ]] ; then return fi ### Nyan-cat prompt. PS1="\`if [ \$? = 0 ]; then echo \[\e[35m\]^_^\[\e[0m\]; else echo \[\e[31m\]O_O\[\e[0m\]; fi\` \$ " ### PATH export PATH=$PATH:$HOME/bin So when I run emacs from terminal all OK. When I start it with dmenu (getenv "PATH") and exec-path variable doesn't contain ~/bin directory. When I do it in xfce with xfrun4 command with same bash configuration all seams to work too. What is the problem with dmenu?

    Read the article

  • Running Batch File As An Administrator…

    - by WidmarkRob
    I successfully created a batch file to flush my DNS. I have added a pause, I noticed in the title bar of the console window… It's not running as administrator. I've already tried a couple of variations of this… Just a little guidance would be most appreciated. I remember reading a blog somewhere, it said something about capitalization wasn't important… Is camel casing important in writing batch files? @echo off echo. pause CD.. CD.. echo. runas /user:<Administrator> ipconfig /flushdns echo. pause echo.

    Read the article

  • SVN Connection Not Successful

    - by user66850
    I am getting the following message when attempting to connect to our company's SVN repository - the same error occurs whether I try from the OSX command line or Eclipse. Any ideas on where to troubleshoot? I can access from other similar computers and others in my team do not have any problem - this issue started occurring on my MacBook Pro yesterday afternoon (no known changes were made to the OS prior to problem starting). $ svn co http://example.ca/cwl/tags/app svn: OPTIONS of 'http://example.ca/cwl/tags/app': Could not read status line: connection was closed by server (http://example.ca)*

    Read the article

  • How can I add a wireless router to a wired router?

    - by Tester101
    The Setup: wired D-link (EBR-2310) router connected to my cable modem. Wireless NetGear N300 (WNR2000v3) router connected to a LAN port on the wired router. What I'm trying to do: I'm trying to setup the wireless router to be a separate network, that only accesses the internet through the wired router. What I've done so far. I setup the wireless router's WAN port to get an address from ISP (which should be coming from my wired router running DHCP), and the LAN as a subnet (192.168.1). Wired router's LAN is 192.168.0. The problem: I'm not able to connect to the internet from the wireless router. At one point my wired router showed that it was handing out an IP to the wireless router, but that is not happening anymore. The question: Is what I'm trying to do possible? Am I not thinking about this properly? Do I need to buy a better wired router, with 2 WAN ports? How can I configure these routers to work together?

    Read the article

  • Alt-tab icon list in Gnome and metacity?

    - by Vinh Nguyen
    Can anyone provide a reference or explain how the icons to the alt-tab list is populated? I would like to specify some icons for some programs that do not have icons, e.g. xterm. I'm using Ubuntu 11.04 with Gnome 2 (Ubuntu Classic) and metacity as the window manager. I did see this thread that mentions /usr/share/pixmap/, but if I use cp gnome-terminal.xpm xterm.xpm the icon was not populated in the alt-tab icon list (even after a logout/login). I do see that the icon is populated when I added the xterm command to the Program Menu.

    Read the article

  • DOS Batch file to find "new" files by date

    - by Todd McArthur
    My PC has entered an infinite BSOD loop - but I do have access to a safe-mode command prompt. I'm trying to get an idea of "what changed" that might have triggered this. e.g. I might have gotten a virus, or an app update went belly up. I'd like to thus see which files were created/modified in the last few days/week or at least the *.exe, *.dll, *.com, *.bat etc. I thought I was ok with my Batch-fu but I'm stumped on how to write a quick batch file/command that would list the files for me. REM This will find the files, but the results are all muddled REM all EXE files, reverse sort by date, recursively through sub-directories dir *.exe /O-D /S What I'd really like is to find all (executable filetypes) that were created/modified in the last 3-7 days. Can anyone point me in the right direction?

    Read the article

  • Internet Explorer 9 won't start

    - by cros
    I have installed Internet Explorer 9. Now when I try to start it the application window flashes up briefly before closing again. What's wrong? I have tried to uninstall IE9, then the problem persisted with IE8. I reinstalled IE9 and the problem is still there. I have tried to use inetcpl.cpl to reset all settings and turn on software rendering, but it didn't help. I can't find any error messages in the Event logs, and the crash doesn't give any kind of error message. My system is Windows 7 Enterprise with SP1.

    Read the article

  • How do I securely share / allow access to a drive?

    - by sleske
    To simplify backing up a laptop (Windows Vista), I'm planning on sharing its C: drive (with password protection) and using that to back it up from another computer. What are the security implications of this? If I share C: with a reasonable password, how big is the risk of compromise if the system is e.g. inadvertently used on a public WLAN or similar? Background: I'm planning to use [Areca Backup][1] to back up two systems (Windows XP and Vista). My current plan is to install Areca on the XP box, and share the Vista system's C: as a shared folder, so the XP system can read it. Then I can set up the drive as a network drive and have Areca read it like a local drive. Of course, if you can think of a more elegant way of doing this, I'm open to suggestions.

    Read the article

  • How to Create Network File Shares with No Passwords in Windows 8

    - by Taylor Gibb
    We have all had to connect to a network share at some point only to have the authentication dialog pop up. There are many ways around it, for example mapping a network drive, but if you have a lot of users connecting to copy some files you may want to disable the password dialog instead of distributing your password. How To Delete, Move, or Rename Locked Files in Windows HTG Explains: Why Screen Savers Are No Longer Necessary 6 Ways Windows 8 Is More Secure Than Windows 7

    Read the article

  • Microsoft Surface versus iPad 4 : comparaison au niveau du HTML5 par l'équipe Sencha

    Microsoft Surface versus iPad 4 : comparaison au niveau du HTML5 par l'équipe Sencha. [IMG]http://cdn.sencha.io/img/20121119-surface-vs-ipad-preview.png[/IMG] Sencha fournit des outils de développement pour bureau et mobile. Son équipe a mis l'iPad 4 et la tablette Surface de Microsoft à l'épreuve pour voir comment ils se débrouillent en tant que plates-formes HTML5. Le HTML5 est la prochaine génération de technologies Web qui est adoptée de plus en plus pour développer des applications qui peuvent être rédigées en une seule fois et exécutées sur plusieurs systèmes d'exploitation, les navigateurs et les périphériques. Les tests révèlent que l...

    Read the article

  • Presenting at Usergroup meeting in Dublin

    - by simonsabin
    I'll be over in Dublin doing a usergroup meeting on Thursday evening at the Microsoft office. The subject of the talk is “Almost all queries have to do two things, get data and join it together. In this session we will look at the aspects of these that most people think they know but in reality don’t. “ If you think you know SQL then you should come along and we'll see if you are right http://www.mtug.ie/UserGroups/ SQLServer/tabid/82/ctl/Details/ Mid/413/ItemID/110/ Default.aspx?ContainerSrc...(read more)

    Read the article

  • Data Virtualization: Federated and Hybrid

    - by Krishnamoorthy
    Data becomes useful when it can be leveraged at the right time. Not only enterprises application stores operate on large volume, velocity and variety of data. Mobile and social computing are in the need of operating in foresaid data. Replicating and transferring large swaths of data is one challenge faced in the field of data integration. However, smaller chunks of data aggregated from a variety of sources presents and even more interesting challenge in the industry. Over the past few decades, technology trends focused on best user experience, operating systems, high performance computing, high performance web sites, analysis of warehouse data, service oriented architecture, social computing, cloud computing, and big data. Operating on the ‘dark data’ becomes mandatory in the future technology trend, although, no solution can make dark data useful data in a single day. Useful data can be quantified by the facts of contextual, personalized and on time delivery. In most cases, data from a single source may not be complete the picture. Data has to be combined and computed from various sources, where data may be captured as hybrid data, meaning the combination of structured and unstructured data. Since related data is often found across disparate sources, effectively integrating these sources determines how useful this data ultimately becomes. Technology trends in 2013 are expected to focus on big data and private cloud. Consumers are not merely interested in where data is located or how data is retrieved and computed. Consumers are interested in how quick and how the data can be leveraged. In many cases, data virtualization is the right solution, and is expected to play a foundational role for SOA, Cloud integration, and Big Data. The Oracle Data Integration portfolio includes a data virtualization product called ODSI (Oracle Data Service Integrator). Unlike other data virtualization solutions, ODSI can perform both read and write operations on federated/hybrid data (RDBMS, Webservices,  delimited file and XML). The ODSI Engine is built on XQuery, hence ODSI user can perform computations on data either using XQuery or SQL. Built in data and query caching features, which reduces latency in repetitive calls. Rightly positioning ODSI, can results in a highly scalable model, reducing spend on additional hardware infrastructure.

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >