Daily Archives

Articles indexed Tuesday May 11 2010

Page 65/123 | < Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >

  • CSS selectors : should I minimise my use of the class attribute in the HTML or optimise the speed

    - by Laurent Bourgault-Roy
    As I was working on a small website, I decided to use the PageSpeed extension to check if their was some improvement I could do to make the site load faster. However I was quite surprise when it told me that my use of CSS selector was "inefficient". I was always told that you should keep the usage of the class attribute in the HTML to a minimum, but if I understand correctly what PageSpeed tell me, it's much more efficient for the browser to match directly against a class name. It make sense to me, but it also mean that I need to put more CSS classes in my HTML. It also make my .css file a little harder to read. I usually tend to mark my CSS like this : #mainContent p.productDescription em.priceTag { ... } Which make it easy to read : I know this will affect the main content and that it affect something in a paragraph tag (so I wont start to put all sort of layout code in it) that describe a product and its something that need emphasis. However it seem I should rewrite it as .priceTag { ... } Which remove all context information about the style. And if I want to use differently formatted price tag (for example, one in a list on the sidebar and one in a paragraph), I need to use something like that .paragraphPriceTag { ... } .listPriceTag { ... } Which really annoy me since I seem to duplicate the semantic of the HTML in my classes. And that mean I can't put common style in an unqualified .priceTag { ... } and thus I need to replicate the style in both CSS rule, making it harder to make change. (Altough for that I could use multiple class selector, but IE6 dont support them) I believe making code harder to read for the sake of speed has never been really considered a very good practice . Except where it is critical, of course. This is why people use PHP/Ruby/C# etc. instead of C/assembly to code their site. It's easier to write and debug. So I was wondering if I should stick with few CSS classes and complex selector or if I should go the optimisation route and remove my fancy CSS selectors for the sake of speed? Does PageSpeed make over the top recommandation? On most modern computer, will it even make a difference?

    Read the article

  • Dynamic decision on which class to use

    - by Sirupsen
    Hello, Let's say I have a class named Klass, and a class called Klass2. Depending on the user's input, I'd like to decide whether I'll call "hello_world" on Klass, or Klass2: class Klass def self.hello_world "Hello World from Klass1!" end end class Klass2 def self.hello_world "Hello World from Klass2!" end end input = gets.strip class_to_use = input puts class_to_use.send :hello_world The user inputs "Klass2" and the script should say: Hello World from Klass2! Obviously this code doesn't work, since I'm calling #hello_world on String, but I'd like to call #hello_world on Klass2. How do I "convert" the string into a referrence to Klass2 (or whatever the user might input), or how could I else would I achieve this behavior?

    Read the article

  • extjs - 'Store is undefined'

    - by Jamie
    Hi all, I'm pretty sure this a trivial problem and i'm just being a bit stupid. Your help would be hugely appreciated. In controls/dashboard.js I have: Ext.ill.WCSS.controls.dashboard = { xtype:'portal', region:'center', margins:'35 5 5 0', items:[{ columnWidth: 1, style:'padding:10px', items:[{ title: 'My Cluster Jobs', layout:'fit', html: "test" }] },{ columnWidth: 1, style:'padding:10px', items:[{ title: 'All Cluster Jobs', iconCls: 'icon-queue', html: "test", items: new Ext.grid.GridPanel({ title: 'Cluster Job Queue', store: Ext.ill.WCSS.stores.dashboardClusterJobs, width: 791, height: 333, frame: true, loadMask: true, stateful: false, autoHeight: true, stripeRows: true, floating: false, footer: false, collapsible: false, animCollapse: false, titleCollapse: false, columns:[ { xtype: 'gridcolumn', header: 'Job ID', sortable: true, resizable: true, width: 100, dataIndex: 'JB_job_number', fixed: false }, { xtype: 'gridcolumn', header: 'Priority', sortable: true, resizable: true, width: 100, dataIndex: 'JAT_prio', fixed: false }, { xtype: 'gridcolumn', header: 'User', sortable: true, resizable: true, width: 100, dataIndex: 'JB_owner' }, { xtype: 'gridcolumn', header: 'State', sortable: true, resizable: true, width: 100, dataIndex: 'state' }, { xtype: 'gridcolumn', header: 'Date Submitted', sortable: true, resizable: true, width: 100, dataIndex: 'JAT_start_time' }, { xtype: 'gridcolumn', header: 'Queue', sortable: true, resizable: true, width: 100, dataIndex: 'queue_name' }, { xtype: 'gridcolumn', header: 'CPUs', sortable: true, resizable: true, width: 100, dataIndex: 'slots' } ], bbar: { xtype: 'paging', store: 'storeClusterQueue', displayInfo: true, refreshText: 'Retrieving queue status...', emptyMsg: 'No jobs to retrieve', id: 'clusterQueuePaging' } }) }] }] }; Simple enough, note the reference to 'Ext.ill.WCSS.stores.dashboardClusterJobs' So in stores/dashboard.js I just have this: Ext.ill.WCSS.stores.dashboardClusterJobs = new Ext.data.XmlStore({ storeId: 'storeClusterJobs', record: 'job_list', autoLoad: true, url: 'joblist.xml', idPath: 'job_info', remoteSort: false, fields: [ { name: 'JB_job_number' }, { name: 'JAT_prio' }, { name: 'JB_name' }, { name: 'JB_owner' }, { name: 'state' }, { name: 'JAT_start_time' }, { name: 'slots' }, { name: 'queue_name' } ] }); I run the code and I get 'store is undefined' :S It's confusing me a lot. All of the javascripts have been included in the correct order. i.e. <script type="text/javascript" src="/js/portal.js"></script> <script type="text/javascript" src="/js/stores/dashboard.js"></script> <script type="text/javascript" src="/js/controls/dashboard.js"></script> Thanks guys!

    Read the article

  • MongoDB index/RAM relationship

    - by Tegan Clark
    I'm about to adopt MongoDB for a new project and I've chosen it for flexibility, not scalability. From the documentation and web posts I keep reading that all indexes are in RAM. This just isn't making sense to me as my indexes will easily be larger than the amount of available RAM. Can anyone share some insight on the index/RAM relationship and what happens when both an individual index and all of my indexes exceed the size of available RAM?

    Read the article

  • flex datagrid re-assign dataprovider

    - by gauravgr8
    Hi, I am working on a datagrid with custom itemRenderer & [Bindable]xmllist as dataprovider. Now the changes done in xmllist are not reflected on datagrid UI until unless I re-assign the dataprovider as the same xmllist. As the dataprovider is Bindable so re-assigning is not required. But it was not working so I re-assigned the xmllist to the dataprovider of datagrid. It worked. Now my problem is when I re-assign the dataprovider my datagrid flicker(refreshes). It should not happen. 1) Is there any way out to avoid re-assigning of dataprovider? 2) Is there any way to stop flickering of datagrid on re-assigning the dataprovider? Thanks in advance.

    Read the article

  • JWPlayer plays videos at 3x speed on the first run, then works fine in subsequent runs on the same p

    - by Josiah Kiehl
    Go here: http://nano.materials.drexel.edu/research/videolibrary For some bizarre reason, the videos will play at 3x speed on the first run through, but then will play at normal speed each subsequent play. This doesn't happen all the time, and it's not always the same video(s) that do it. I'm utterly baffled. I've reconverted the videos from m4p to flv (using BitComet's converter) several times, double checking the settings each time through with no change to the behavior. Anyone have a clue what's going on?

    Read the article

  • Datanucleus/JDO Level 2 Cache on Google App Engine

    - by Thilo
    Is it possible (and does it make sense) to use the JDO Level 2 Cache for the Google App Engine Datastore? First of all, why is there no documentation about this on Google's pages? Are there some problems with it? Do we need to set up limits to protect our memcache quota? According to DataNucleus on Stackoverflow, you can set the following persistence properties: datanucleus.cache.level2.type=javax.cache datanucleus.cache.level2.cacheName={cache name} Is that all? Can we choose any cache name? Other sources on the Internet report using different settings. Also, it seems we need to download the DataNucleus Cache support plugin. Which version would be appropriate? And do we just place it in WEB-INF/lib or does it need more setup to activate it?

    Read the article

  • ASP.NET validators alignment issue

    - by Mahesh
    Hi, I am developing contactus webpage which have a input field called Email. It is validated against a required field validator and regular expression validator with appropriate messages. Required: Enter Email Regular Expression: Invalid Email I am setting these two as given below: <asp:TextBox ID="txtEmail" runat="server"></asp:TextBox> <font color="#FF0000">*</font> <asp:RequiredFieldValidator ID="rfvemail" CssClass="error_text" ControlToValidate="txtEmail" runat="server" ErrorMessage="Enter email address."></asp:RequiredFieldValidator> <asp:RegularExpressionValidator ID="revemail" runat="server" ControlToValidate="txtEmail" ErrorMessage="Invalid Email" ValidationExpression="\w+([-+.]\w+)*@\w+([-.]\w+)*\.\w+([-.]\w+)*"></asp:RegularExpressionValidator> My problem is both Enter Email and Invalid Email is occupying its own space. For Ex: If I leave email as empty space and press submit, Enter Email is displaying right next to it. If I enter invalid email(xxx), Enter Email is off but taking the space, Invalid Email message is displayed after these space taken by 'Enter Email' before. Is there any way to remove this space?? Mahesh

    Read the article

  • High Performance SQL Views Using WITH(NOLOCK)

    - by gt0084e1
    Every now and then you find a simple way to make everything much faster. We often find customers creating data warehouses or OLAP cubes even though they have a relatively small amount of data (a few gigs) compared to their server memory. If you have more server memory than the size of your database or working set, nearly any aggregate query should run in a second or less. In some situations there may be high traffic on from the transactional application and SQL server may wait for several other queries to run before giving you your results. The purpose of this is make sure you don’t get two versions of the truth. In an ATM system, you want to give the bank balance after the withdrawal, not before or you may get a very unhappy customer. So by default databases are rightly very conservative about this kind of thing. Unfortunately this split-second precision comes at a cost. The performance of the query may not be acceptable by today’s standards because the database has to maintain locks on the server. Fortunately, SQL Server gives you a simple way to ask for the current version of the data without the pending transactions. To better facilitate reporting, you can create a view that includes these directives. CREATE VIEW CategoriesAndProducts AS SELECT * FROM dbo.Categories WITH(NOLOCK) INNER JOIN dbo.Products WITH(NOLOCK) ON dbo.Categories.CategoryID = dbo.Products.CategoryID In some cases quires that are taking minutes end up taking seconds. Much easier than moving the data to a separate database and it’s still pretty much real time give or take a few milliseconds. You’ve been warned not to use this for bank balances though. More from Data Stream

    Read the article

  • How do I install git/git-svn on RHEL5 with a custom perl install?

    - by kbosak
    I've had nothing but trouble trying to install Git on RHEL5. First I tried from source, but ran into several issues with installing the docs. There appeared to be missing libs and such for parsing xml that I couldn't figure out how to get installed and recognized. Then I tried using the EPEL yum repository and was able to install git and its docs but now git-svn is not working. It complains about not finding the perl modules Git.pm and SVN/Core.pm. When I set the GITPERLLIB environment variable to the location of those libs it seg faults. Some background: RHEL5 came with perl 5.8.8, but we wanted to use 5.10 so I installed that from source (to a custom location). Someone then symlinked the system perl binary to this newer version of Perl to make sure nobody uses the wrong version. Each developer also has their own build of Perl. So I'm wondering what's the best way to install Git on this system and have both the docs and git-svn working correctly for each user. Unfortunately I'm a developer and not as good with system administration so take it easy on me.

    Read the article

  • Vertically resize two windows at same time?

    - by Guy
    I love the new feature in Windows 7 where I can grab the title bar and "slam" a window against the right edge of the computer and it will size that window to the right half of the screen. I can then grab another window and do the same against the left side of the screen. Once I've done that I often find that one of those windows needs a bit more horizontal space and the other can do with less. So I grab the edge in the middle of each window and resize that window so I can most efficiently use my screen space. Problem is that I have to do this twice, once for each window. Is there a way to grab the inside vertical edge of both windows at the same time so that I can make one wider and the other smaller at the same time?

    Read the article

  • Why are USB 2.0 devices crashing my system?

    - by BenAlabaster
    Background on the machine I'm having a problem with: The machine was inherited and appears to be circa 2003 (there's a date stamp on the power supply which leads me to this conclusion). I've got it set up as a Skype terminal for my 2 year old to keep in touch with her grandparents and other members of the family - which everyone loves. It has a generic baby-ATX motherboard with no identifying markings. CPU-Z identifies the motherboard model as VT8601 but doesn't provide me with any manufacturer name. There's one stamp on the motherboard that says "Rev.B". On board it has 10/100 LAN, 2 x USB 1.0, VGA, PS/2 for KB and mouse, parallel port, 2 x serial ports, 2 x IDE, 1 x floppy, 2 x SDRAM slots, 1 x CPU housing that is seating a 1.3GHz Intel Celeron CPU, 3 x PCI, 1 x AGP - although you can only use 2 of the PCI slots if you use the AGP slot due to the physical layout of the board. It's got 768Mb PC133 SDRAM - 1 x 512Mb & 1 x 256Mb installed as well as a D-LINK WDA-2320 54G Wi-Fi network card and a generic USB 2.0 expansion board containing 3 x external + 1 x internal USB connectors. All this is sitting in a slimline case. I don't know the wattage of the PSU, but can post this later if this proves to be helpful. The motherboard is running a version of Award BIOS for which I don't have the version number to hand but can again post this later if it would be helpful. It has an 80Gb Western Digital hard drive freshly formatted and built with Windows XP Professional with Service Pack 3 and all current patches. In addition to Windows XP, the only other software it's running is Skype 4.1 (4.2 crashes the machine as soon as it starts up). It's got a Daytek MV150 15" touch screen running through the VGA and COM1 with the most current drivers from the Daytek website and the most current version of ELO-Touchsystems drivers for the touch component. The webcam is a Logitech Webcam C200 with the latest drivers from the Logitech website. The problem If I hook any USB 2.0 devices to this machine, it hangs the whole machine and I have to hard boot it to get it back up. Workarounds found I can plug the same devices into the on board USB 1.0 connectors and everything works fine, albeit at reduced performance. I've tried 3 different kinds of USB thumb drives, 3 different makes/models of webcams and my iPhone all with the same effect. They're recognized and don't hang the machine when I hook them to the USB 1.0 but if I hook them to the USB 2.0 ports, the machine hangs within a couple of seconds of recognizing the devices were connected. Attempted solutions I've tried disabling all the on board devices that I'm not using - such as the on board LAN, the second COM port, the AGP connector etc. through the BIOS in an (perhaps misguided or futile) attempt to reduce the power consumption... I don't think it had any effect but it didn't do any harm. I was wondering if the PSU wattage just isn't enough to drive the USB 2.0 devices; I've seen this suggested but haven't found any confirmation that this could really be an issue - nor have I found a way to work around this issue - if indeed it is one. Any ideas? The only thing I haven't done which I only just thought of while writing this essay is trying the USB 2.0 card in a different PCI slot, or re-ordering the wi-fi and USB cards in the slots... although I'm not sure if this will make any difference. I've installed the USB card in another machine and it works without issue, so it's not a problem with the USB card itself. Other thoughts Perhaps this is an incompatibility between the USB 2.0 card and the BIOS, would re-flashing the BIOS with a newer version help? Do I need to be able to identify the manufacturer of the motherboard in order to be able to find a BIOS edition specific for this motherboard or will any version of Award BIOS function in its place? Question Does anyone have any ideas that could help me get my USB 2.0 devices hooked up to this machine?

    Read the article

  • Verizon Business Delivers New Sales and Support Tools

    - by michael.seback
    Verizon Business Delivers New Sales and Support Tools and Improves System Performance by 35% Verizon Business, a unit of Verizon Communications, is a global leader in communications and IT solutions. With one of the world's most connected internet protocol networks, Verizon Business delivers communications, IT, security, and network solutions to many of the largest businesses and governments. ..."Our work with Accenture to upgrade our Oracle systems has improved system performance significantly. In a recent survey, 84% of users said performance was 'faster' or 'much faster.' Plus, our sales and support staff have new tools to improve productivity and customer service, which ultimately drives customer retention and revenue." - Rob Moore, Director Verizon Business ...Read more.

    Read the article

  • How to stop an application in C# ?

    - by Praveen Sharma
    Hi All, I have an application and from this application I have to start another process by shutting down the current application and after the completion of the process again start the application. The flow is as follows, suppose I have an application app.exe, and another application another.exe, so i have to do following: 1) Start app.exe 2) Stop/shutdown app.exe and start another.exe from app.exe 3) When another.exe completes, stop/shutdown another.exe and start app.exe from another.exe Anyone please provide me some clue of how to do it ? Thanks in advance for any help...

    Read the article

  • Date Comparison using Java

    - by Lakshman
    I have two dates: toDate (user input in MM/dd/yyyy format) currentDate (obtained by new Date()) I need to compare the currentDate with toDate. I have to display a report only when the toDate is equal to or more than currentDate. How can I do that?

    Read the article

  • Select row data as ColumnName and Value

    - by Bobcat1506
    I have a history table and I need to select the values from this table in ColumnName, ColumnValue form. I am using SQL Server 2008 and I wasn’t sure if I could use the PIVOT function to accomplish this. Below is a simplified example of what I need to accomplish: This is what I have: The table’s schema is CREATE TABLE TABLE1 (ID INT PRIMARY KEY, NAME VARCHAR(50)) The “history” table’s schema is CREATE TABLE TABLE1_HISTORY( ID INT, NAME VARCHAR(50), TYPE VARCHAR(50), TRANSACTION_ID VARCHAR(50)) Here is the data from TABLE1_HISTORY ID NAME TYPE TRANSACTION_ID 1 Joe INSERT a 1 Bill UPDATE b 1 Bill DELETE c I need to extract the data from TABLE1_HISTORY into this format: TransactionId Type ColumnName ColumnValue a INSERT ID 1 a INSERT NAME Joe b UPDATE ID 1 b UPDATE NAME Bill c DELETE ID 1 c DELETE NAME Bill Other than upgrading to Enterprise Edition and leveraging the built in change tracking functionality, what is your suggestion for accomplishing this task?

    Read the article

  • Python file input string: how to handle escaped unicode characters?

    - by Michi
    In a text file (test.txt), my string looks like this: Gro\u00DFbritannien Reading it, python escapes the backslash: >>> file = open('test.txt', 'r') >>> input = file.readline() >>> input 'Gro\\u00DFbritannien' How can I have this interpreted as unicode? decode() and unicode() won't do the job. The following code writes Gro\u00DFbritannien back to the file, but I want it to be Großbritannien >>> input.decode('latin-1') u'Gro\\u00DFbritannien' >>> out = codecs.open('out.txt', 'w', 'utf-8') >>> out.write(input)

    Read the article

  • exchange web services - search for subject NOT EQUAL TO "" (empty string)

    - by nathan kelly
    Trying to find emails from an inbox using exchange webservices (against exchange 2007). the subject of which should not be empty. Tried the following: searchFilterCollection.Add(new SearchFilter.IsNotEqualTo(EmailMessageSchema.Subject, string.Empty)); and searchFilterCollection.Add(new SearchFilter.IsNotEqualTo(EmailMessageSchema.Subject, null)); but no luck. What do I need to do to get those messages that have a subject?

    Read the article

< Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >