Monthly Archives

Articles indexed in June 2012

Page 72/464 | < Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >

• Virtualise Excel in a browser

  - by Macros

  Is it possible to give users access to a virtualised instance of Excel - I don't want to give them access to a full OS (although this will clearly be running in the background, all they can access is Excel - they don't even see any other screens)? Secondly, if it is possible, is it possible to do within a browser? Edit I am building a system which is designed to test candidates skills in Excel and for this reason needs to use the full desktop version and not a web app. I don't want to have to ensure Excel is installed on the client machine as there will be issues around differing versions and security as the workbook(s) that are used in the test use VBA extensively to customise and mark the exercises. Ideally my web app would be able to open a session to the server which then just puts the user into an instance of Excel without ever seeing a desktop. I would also need to be able to pass in command line parameters in order to define which workbook to open and also pass in a unique token to identify the user

  Read the article

• VPN is working, except for DNS lookups. Firewall (Cisco ASA 5505) issue?

  - by macke

  I've got the following set up: LAN -> DHCP / DNS / VPN server (OSX 10.6) -> Cisco ASA 5505 -> WAN Connecting to the LAN via VPN works fine. I get all the details properly and I can ping any host on the internal network using their IP. However, I can't do any host lookups whatsoever. I've looked through the logs on and found this nugget in the firewall log: 3 Sep 08 2010 10:46:40 305006 10.0.0.197 65371 portmap translation creation failed for udp src inside:myhostname.local/53 dst inside:10.0.0.197/65371 Port 53 is dns services, no? Because of that log entry, I'm thinking that the issue is with the firewall, not the server. Any ideas? Please keep in mind that I have very little knowledge and experience with this kind of firewall and the little experience I do have is with the ASDM GUI console, not the CLI console.

  Read the article

• netlogon errors

  - by rorr

  I have two instances of mssql 2005 and am using CA XOSoft replication. The master is a failover cluster and the replica is a standalone server. They are all running Server 2003 sp2 x64. Same patch levels on all servers. This setup has worked great for several months until we recently restricted the RPC ports on both nodes of the master(5000 - 6000 using rpccfg.exe). We have to implement egress filtering, thus the limiting of the ports. We began receiving login errors for sql windows authentication and NETLOGON Event ID: 5719: This computer was not able to set up a secure session with a domain controller in domain due to the following: Not enough storage is available to process this command. This may lead to authentication problems. Make sure that this computer is connected to the network. If the problem persists, please contact your domain administrator. We also see group policies failing to update and cluster file shares go offline at the same time. The RPC ports were set back to default when we started seeing these problems and the servers rebooted, but the problems persist. The domain controllers are not showing any errors. Running dcdiag and netdiag shows everything is fine. We have noticed that the XOSoft service ws_rep.exe is using a lot of handles(8 - 9k), about the same number that sqlserver is using. As soon as xosoft replication is stopped the login errors cease and everything functions correctly. I have opened a ticket with CA for XOSoft, but I'm not sure that the problem is actually xosoft, but that it is the one bringing the problem to light. I'm looking for tips on debugging RPC problems. Specifically on limiting the ports and then reverting the changes.

  Read the article

• Are two periods allowed in the local-part of an email address?

  - by Mike B

  A third-party email gateway relay is refusing to process a message for an email address we're sending to. The address is in the format of [email protected] (note the two periods). Is this allowed by RFC guidelines? RFC 2822 seems to object to this in section 3.4.1: The locally interpreted string is either a quoted-string or a dot-atom. If the string can be represented as a dot-atom (that is, it contains no characters other than atext characters or "." surrounded by atext characters), then the dot-atom form SHOULD be used and the quoted-string form SHOULD NOT be used. Comments and folding white space SHOULD NOT be used around the "@" in the addr-spec. Furthermore, in that same section, it references this: addr-spec = local-part "@" domain local-part = dot-atom / quoted-string / obs-local-part I interpret this to mean that the localpart can have content separated by dots but there cannot be two successive dots, and it cannot start or end with a dot. That being said, I'm not familiar with dot-atom syntax so maybe I'm mistaken here. Can someone please confirm and explain?

  Read the article

• Fastest security check of file tree on NFS

  - by fungs

  I am currently experiencing very bad performance using the following on an NFS network folder: time find . | while read f; do test -L "$f" && f=$(readlink -m $f); grp="$(stat -c %G $f)"; perm="$(stat -c %A $f)"; done Question 1) Within the loop permissions are checked using the variables grp and perm. Is there a way to lower the amount of disc I/O for these kind of checks over the network (e.g. read all meta data at once using find)? Question 2) It seems like the NFS isn't tuned very well, the same operation on a similar network link via SSHFS take only one third of the time. All parameters are auto-negotiated. Any suggestions?

  Read the article

• open-xen-manger configuration error

  - by user113505

  I have installed open xen manager on ubuntu 10.04 for managing XEN running on other machine,but when i add server and click connect through port 80 its showing < ProtocolError for 192.168.2.13:80/RPC2: 404 Not Found also i am getting following in the web server access log of remote machine 192.168.2.8 - - [05/Jun/2012:21:29:32 +0530] "POST /RPC2 HTTP/1.0" 404 483 "-" "xmlrpclib.py/1.0.1 (by www.pythonware.com)" can anyone help me in this

  Read the article

• Could this server log mean my server is being used as a proxy?

  - by So Over It

  I came across the following entry in my access.log: 58.218.199.147 - - [05/Jun/2012:12:56:04 +1000] "GET http://proxyproxys.com/ HTTP/1.1" 200 183 "-" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1)" Normally when I see a full URL entry in my access.log I assume it is log spam with people trying to get me to access their site. These entries are normally followed with a 404 response. The above entry is followed with a 200 'success' response! Doing some searching it would seem that this can occur when someone is trying to use your server as a proxy. This disturbed me more - especially because the URL in question has the word proxy in it. Going to the site 'proxyproxys.com' (using hidemyass.com to protect my own identity), the site returns what appears to be some sort of 'proxy judge' ---------------------------------------- HTTP_ACCEPT=text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 HTTP_ACCEPT_LANGUAGE=en-US,en;q=0.8 HTTP_USER_AGENT=Mozilla/5.0 (Macintosh; Intel Mac OS X 10_7_4) AppleWebKit/536.5 (KHTML, like Gecko) Chrome/19.0.1084.53 Safari/536.5 HTTP_CONNECTION=close REMOTE_PORT=56355 REMOTE_HOST=74.63.112.142 REMOTE_ADDR=74.63.112.142 ---------------------------------------- CS_ProxyJudge Result=HIGH_ANONYMITY ---------------------------------------- Question: 1) does the 200 success mean that someone has been able to successfully use my server as a proxy? 2) are there other means of confirming if my server is being used as a proxy 3) can you refer me to documentation to help 'close up' my security gap if there is one. Thanks.

  Read the article

• Can't get FTP to work on centOS 5.6

  - by josi

  Hi guys I have been trying for a few hours to install and get FTP to work... I did yum install ftp and yum install vsftpd They all installed and are running but when I try to use filezilla or some other client I just can't connect....I've tried connecting on port 21 and port 990 ....nothing! These are my iptables # Firewall configuration written by system-config-securitylevel # Manual customization of this file is not recommended. *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :RH-Firewall-1-INPUT - [0:0] -A INPUT -j RH-Firewall-1-INPUT -A FORWARD -j RH-Firewall-1-INPUT -A RH-Firewall-1-INPUT -i lo -j ACCEPT -A RH-Firewall-1-INPUT -p icmp --icmp-type any -j ACCEPT -A RH-Firewall-1-INPUT -p 50 -j ACCEPT -A RH-Firewall-1-INPUT -p 51 -j ACCEPT -A RH-Firewall-1-INPUT -p esp -j ACCEPT -A RH-Firewall-1-INPUT -p ah -j ACCEPT -A RH-Firewall-1-INPUT -d 224.0.0.251 -p udp -m udp --dport 5353 -j ACCEPT -A RH-Firewall-1-INPUT -p udp -m udp --dport 631 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m tcp --dport 631 -j ACCEPT -A RH-Firewall-1-INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 22 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 80 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 443 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 21 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 25 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 53 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 80 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 110 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 990 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 443 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 465 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 646 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 993 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 995 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 3306 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 10009 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 7778 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 5000 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 25566 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 80 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 8765 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 8192 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 8123 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 20 -j ACCEPT -A RH-Firewall-1-INPUT -p udp -m state --state NEW -m udp --dport 23877 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 9091 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 51413 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 10011 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 30033 -j ACCEPT -A RH-Firewall-1-INPUT -p udp --dport 5353 -d 224.0.0.251 -j ACCEPT -A RH-Firewall-1-INPUT -p udp -m udp --dport 631 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m tcp --dport 631 -j ACCEPT -A RH-Firewall-1-INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT -A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT -A RH-Firewall-1-INPUT -j REJECT --reject-with icmp-host-prohibited COMMIT Any help would be much appreciated! If I do lsof -i :21 without the "." it shows nothing. [root@ks3000420 ~]# lsof -i :21 . COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME bash 9964 root cwd DIR 8,1 4096 483329 . bash 11608 root cwd DIR 8,1 4096 483329 . bash 13550 root cwd DIR 8,1 4096 483329 . vi 14117 root cwd DIR 8,1 4096 483329 . sftp-serv 15261 root cwd DIR 8,1 4096 483329 . sftp-serv 15477 root cwd DIR 8,1 4096 483329 . bash 19074 root cwd DIR 8,1 4096 483329 . lsof 19100 root cwd DIR 8,1 4096 483329 . lsof 19101 root cwd DIR 8,1 4096 483329 .

  Read the article

• Switching glassfish 2.x to 3.1.1

  - by Alexandre Abreu

  So I am managing a old java project that is using glassfish 2.x. Seems like netbeans does not support 2.x versions any more, so I want to change it to 3.1.1. How to properly make that change? I have JDK 1.6 installed. When I try to select the 3.1.1 does not fix the error "Unable to find Application Server J2EE" Thanks in advance. Sorry if this question is in the wrong place, this is really not my area.

  Read the article

• How would I measure the amount of RAM needed per Glassfish domain? [closed]

  - by oligofren

  Possible Duplicate: Can you help me with my capacity planning? In our test environment we have a lot of apps spread out over a few servers and Glassfish domains. To make versioning easier I would have liked to have one Glassfish domain per customer per app (kind of like a heavyweight version of lots of jetty instances). But I have heard that Glassfish is kind of heavy on the resources, and so I would need to measure approximately how many instances would fit in the available RAM. These are low-traffic/low load testing servers, so CPU is not really an issue, though RAM might be. How would I get an approximate measure of how much RAM is needed? This is one Glassfish 3 instance with one heavy EAR application deployed. top? jvmstats? ??

  Read the article

• On Windows 7, how can I tell if a recording is multi-channel without third party tools? [migrated]

  - by engineerchuan

  A customer has an audio that is confidential and can't send it to me. He also would not like to install other tools. He has a basic Windows 7 install. Is there any way to tell whether the recording is one channel or two channel? Normally, I would just get the audio and soxi it. Or, I would tell him to install Audacity or equivalent sound editor and open it up. I also thought that if you right clicked and looked at the size, bit rate, and length, you could get number of channels but bit rate already factors in number of channels. Sorry I'm not giving you a lot to work with.

  Read the article

• problems with ASA 8.4 Nat Rules for a Web Server

  - by Marko

  Having problems with the NAT RULES and Access Rules changes on my ASA5505. Want to straight replace a 5505 with a newer 5505 and unfortunately this means dealing with old version 7.2 and the newer 8.4 configurations. my old NAT RULE: static (inside,outside) WebOutside WebInside netmask 255.255.255.255 and an Access Rule of: access-list outside_access_in extended permit tcp any host WebOutside eq www these dont work in 8.4 I understand there are some changed but I can find little information that makes any sense on how to configure these. Any pointers welcomed.

  Read the article

• IP failover with 2 nodes on different subnet: cannot ping virtual IP from second node?

  - by quanta

  I'm going to setup redundant failover Redmine: another instance was installed on the second server without problem MySQL (running on the same machine with Redmine) was configured as master-master replication Because they are in different subnet (192.168.3.x and 192.168.6.x), it seems that VIPArip is the only choice. /etc/ha.d/ha.cf on node1 logfacility none debug 1 debugfile /var/log/ha-debug logfile /var/log/ha-log autojoin none warntime 3 deadtime 6 initdead 60 udpport 694 ucast eth1 node2.ip keepalive 1 node node1 node node2 crm respawn /etc/ha.d/ha.cf on node2: logfacility none debug 1 debugfile /var/log/ha-debug logfile /var/log/ha-log autojoin none warntime 3 deadtime 6 initdead 60 udpport 694 ucast eth0 node1.ip keepalive 1 node node1 node node2 crm respawn crm configure show: node $id="6c27077e-d718-4c82-b307-7dccaa027a72" node1 node $id="740d0726-e91d-40ed-9dc0-2368214a1f56" node2 primitive VIPArip ocf:heartbeat:VIPArip \ params ip="192.168.6.8" nic="lo:0" \ op start interval="0" timeout="20s" \ op monitor interval="5s" timeout="20s" depth="0" \ op stop interval="0" timeout="20s" \ meta is-managed="true" property $id="cib-bootstrap-options" \ stonith-enabled="false" \ dc-version="1.0.12-unknown" \ cluster-infrastructure="Heartbeat" \ last-lrm-refresh="1338870303" crm_mon -1: ============ Last updated: Tue Jun 5 18:36:42 2012 Stack: Heartbeat Current DC: node2 (740d0726-e91d-40ed-9dc0-2368214a1f56) - partition with quorum Version: 1.0.12-unknown 2 Nodes configured, unknown expected votes 1 Resources configured. ============ Online: [ node1 node2 ] VIPArip (ocf::heartbeat:VIPArip): Started node1 ip addr show lo: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet 192.168.6.8/32 scope global lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever I can ping 192.168.6.8 from node1 (192.168.3.x): # ping -c 4 192.168.6.8 PING 192.168.6.8 (192.168.6.8) 56(84) bytes of data. 64 bytes from 192.168.6.8: icmp_seq=1 ttl=64 time=0.062 ms 64 bytes from 192.168.6.8: icmp_seq=2 ttl=64 time=0.046 ms 64 bytes from 192.168.6.8: icmp_seq=3 ttl=64 time=0.059 ms 64 bytes from 192.168.6.8: icmp_seq=4 ttl=64 time=0.071 ms --- 192.168.6.8 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3000ms rtt min/avg/max/mdev = 0.046/0.059/0.071/0.011 ms but cannot ping virtual IP from node2 (192.168.6.x) and outside. Did I miss something? PS: you probably want to set IP2UTIL=/sbin/ip in the /usr/lib/ocf/resource.d/heartbeat/VIPArip resource agent script if you get something like this: Jun 5 11:08:10 node1 lrmd: [19832]: info: RA output: (VIPArip:stop:stderr) 2012/06/05_11:08:10 ERROR: Invalid OCF_RESK EY_ip [192.168.6.8] http://www.clusterlabs.org/wiki/Debugging_Resource_Failures Reply to @DukeLion: Which router receives RIP updates? When I start the VIPArip resource, ripd was run with below configuration file (on node1): /var/run/resource-agents/VIPArip-ripd.conf: hostname ripd password zebra debug rip events debug rip packet debug rip zebra log file /var/log/quagga/quagga.log router rip !nic_tag no passive-interface lo:0 network lo:0 distribute-list private out lo:0 distribute-list private in lo:0 !metric_tag redistribute connected metric 3 !ip_tag access-list private permit 192.168.6.8/32 access-list private deny any

  Read the article

• Would Windows 8 may increase the Cap of more than 2 GB?

  - by Pisaro

  I have a old Laptop Dell Latitude D430 that I just upgraded to Windows 8. The Ram that I have installed is 2GB (Max Ram that this laptop can handle) but I am wondering if by installing windows 8 can help also to increase the cap of the total Ram that the laptop can handle. I know that some laptops have a cap of RAM by the Bios but I am wondering if any of you know if by installing a new OS can actually change this? thanks, Robert

  Read the article

• Access port on machine by connecting to other machine via SSH?

  - by piquadrat

  I have to access my home router's web interface on port 80. Unfortunately, the only way into the network I have at the moment is SSH to another machine on the same network. me ---|---SSH Box----Home Router My Google foo seems to have abandoned me, I couldn't didn't find anything helpful. Any ideas? Thanks! To clarify: I'm not at home right now. I do however have access to one machine on the network (a QNAP NAS) over SSH. I need to access the home router web interface on port 80 from my notebook which is outside of the home network.

  Read the article

• Shut Out of XP - No Admin Password or CDR

  - by ashes999

  I inherited an old WinXP/Linux dual-boot machine from the stoneage. Because it has Linux, the regular boot process is replaced with the Fedora boot loader; I cannot, therefore, press F8 strategically to tell my PC to boot from CD. Even if I could, it's a moot point; the CDR doesn't seem to recognize any CDs. To make things worse, there's no option to network boot. The original user is probably long gone; I don't know the password for any of the Administrator group users. I can login using my corp account, but that's unprivileged on this machine. Since I'm not an admin, I can't do crazy things, like looking at boot.ini. Or deleting files. I only have 500MB free on my C drive. I'm pretty sure I can't boot from a USB, since I didn't see any settings for this in my BIOS. How can I get admin access for my user? Edit: Things I've tried: Boot from CD (CD not recognized) Launch CD from XP (CD not recognized) Install Daemon Tools Lite so I can install from an ISO -- don't have admin privileges XP password recovery tool -- requires admin privileges Adding an admin user -- no access to Control Panel Users since I'm not an admin Logging in as both the admin users on the system (trying some standard passwords) Using Fedora to chntpw (the Fedora version installed is ancient -- 2.7)

  Read the article

• PC doesn't power up anymore

  - by Andrew

  I will tell you the story behind the problem. The computer needed to be reinstalled, it has 2 HDDs so I had to un-plug one to see which is which, to save as much data as possible. After unplugging the first one, it booted with the reinstallation CD, it wasn't the HDD I was looking for so I turned it off and unplugged the other one. After unplugging and turning on, right after booting test, the HDD was turned off, only the CPU fan was working. Turned it off with the power supply's button help, holding the power button didn't do it. And now it doesn't want to turn on anymore. I tried with another test power supply but the result is the same, doesn't want to turn on. Any idea?

  Read the article

• Can I find the session ID for a user logged on to another machine?

  - by Dan Tao

  I want to open an application on another computer on the same network via the command line. The scenario here is that the user is in a room surrounded by about 20 computers and wants to be able to launch the same app on every computer without walking from screen to screen opening it up on each individual machine. I've discovered that I can get the basic functionality for this using PsExec as follows: psexec \\[computer] -u [username] -p [password] -d -i [SessionID] [program] For computer, username, password, and program, I'm good. Does anyone know of a way I can figure out which SessionID is assigned to a particular user logged on to a particular machine on the network? Alternately, is there a better way to go about what I'm trying to accomplish?

  Read the article

• Problem uninstalling and installing Java on new pc running Windows 7 64 bit os

  - by Brian Gerrin

  I have a new Dell Studio XPS running Windows 7 64 bit os. I am attending online classes which require IE 8 and Java version 6 build 20. The pc came with IE 8 32 bit and Java 6 build 21 already installed. I tried to uninstall Java using add and remove programs but after about 45 minutes of "Preparing to remove application" I got an error refering to a missing dll file and the uninstall failed. I used a third party program to remove Java and downloaded Java 6 build 20. My problem is when I try to install it I get the box telling me "Installing program ... this may take a few minutes" however after 30 to 45 minutes nothing has happend and there is no indication in the progress bar that anything is happening then all of a sudden the program bar is full and the program is supposedly installed. When I try to run it however it doesn't work. Someone help please! I can't get access to my classwork with out this! Thanks

  Read the article

• Very slow accessing printer shared from Windows Machine

  - by Tarski

  How do I go about debugging a networking problem where the office printer is shared off a Windows XP PC and is very slow from me to access? Print/changing any settings can take several minutes and applications often display "Not Responding" in this time. My machine is a Windows Vista PC. The other PCs in the office are either Vista or XP and do not suffer from any printing problems. I am not experiencing any other network related problems, I can access the web and e-mail fine. The printer is a HP officejet Pro 8000

  Read the article

• On Windows 7, how can I tell if a recording is multi-channel without third party tools?

  - by engineerchuan

  A customer has an audio that is confidential and can't send it to me. He also would not like to install other tools. He has a basic Windows 7 install. Is there any way to tell whether the recording is one channel or two channel? Normally, I would just get the audio and soxi it. Or, I would tell him to install Audacity or equivalent sound editor and open it up. I also thought that if you right clicked and looked at the size, bit rate, and length, you could get number of channels but bit rate already factors in number of channels. Sorry I'm not giving you a lot to work with.

  Read the article

• 1 PC, 2 consoles (as in 2 monitors, keyboards and mice)

  - by ciuly

  I have this desire to "kill 2 birds with one shot". Currently, I have 1 server running round the clock, 1 laptop that runs about 8 hours a day, 7 days a week, and a desktop that runs about the same length of time. All 3 are ... old, to say the least. So there is a great need to upgrade (well, the server might handle its job for another year or so, but that only depends on how much time I have to put it to "work"). Now, I'm "dreaming" of only one PC. I'm thinking vmware's ESX. So there will be a VM for the server, a VM for the "laptop" and one for the "desktop". And obviously I'll have to somehow "link" a set of monitor/keyboard/mouse with one of the laptop/desktop VMs. The server doesn't need such things, obviously (it doesn't have them at this moment either). Is something like this possible? ESX is not a requirement, it's just something I found that answers part of my problems, but there still remains the 2 KVM set that needs connecting and "linking" to appropriate VM. Why I would want to do this? well, first of all, it's much cheaper to upgrade one PC than 3. Then, the power consumption is obviously lower. Plus the extra space.Plus it allows me to better separate networks and services. Thanks.

  Read the article

• Understanding the nop byte(s)

  - by Cole Johnson

  Ok, so I was reading through the AMD64 manuels and knowing that nop is really an xchg eax, eax, I looked at the xchg and found something interesting, that it seems a byte can be encoded into the instruction for specifying the registers (apologies I'm on my iPod): picture. So what I am wondering is how does the processor know if there is a byte after to work with or is it that that extra register has to be of type rAX causing it to actually still be the one byte 0x90

  Read the article

• Find what pages IE is fetching similar to console in firebug?

  - by Rob

  Firebug Lite bookmarklet is no help here, on half the pages it doesn't even show up. What I need is basically this: to show what IE is connecting to, because my application is working fine in firefox and chrome, but in an enterprise/corporate environment, I have to get it working with IE as well, and it's not working there. Any ideas of how I can get something similar just to see what the page is trying to (or not trying to) connect to? I'm using IE8 for this (on an windows XP machine, can't use IE9)

  Read the article

• How do I securely store and manage 180 passwords?

  - by Sammy

  I have about 180 passwords for different websites and web services. They are all stored in one single password protected Excel document. As the list gets longer I am more and more concerned about its security. Just how secure, or should I say insecure, is a password protected Excel document? What's the best practice for storing this many passwords in a secure and easy manageable way? I find the Excel method to be easy enough, but I am concerned about the security aspect.

  Read the article

< Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >