Monthly Archives

Articles indexed in June 2011

Page 87/145 | < Previous Page | 83 84 85 86 87 88 89 90 91 92 93 94  | Next Page >

• Set up a GUI managed stateful filtering firewall?

  - by Azendale

  What ways are there of setting up a stateful filtering* firewall whose rules can be managed by a GUI? Can GUFW do it? FireStarter? (or should that be avoided because it is supposedly no longer updated?) *By filtering, I'm mean the traffic I am setting rules up for is not destined for this computer. It is either from or to other computers on my LAN. Say, for (a simplified, hypothetical) example: I have an ethernet connection at my dorm that I have plugged into eth0. It gets an address of 192.168.1.185 and I also have 192.168.185.0/24 routed to me, so I don't have to do any NAT. I have a hub attached to my second ethernet port (eth1) with a few Windows computers and I give addresses out of my 192.168.185.0/24 block with DHCP. How can I use my Ubuntu box to block incoming connections from eth0 that are being routed to my Windows computers and let through just a few specific ports (so fellow students can't see what files my Windows boxes are sharing via SMB)?

  Read the article

• Dual monitors won't accept new settings

  - by mschulze

  I'm trying to use dual monitors but every time I try to change the display settings(external monitor is on the right of the laptop, not the left etc...) my screens go black, then my laptop screen will come back "normally" but my external monitor will just flash different shades of red or black. I cannot interact with anything on my laptop screen even though I can move my mouse around. Even when the monitors attempt to revert back the external monitor continues to flicker instead of reverting. The only way to stop it is to hard-boot but the new settings aren't saved. Also, when the dual monitors are both working my laptop screen has two vertical black bars along its sides. It's like Natty just decided I couldn't use the outer inch and a half of my laptop screen. My external monitor doesn't have this problem, and my laptop uses its full screen size when the external monitor is not hooked up. Does anyone know what I'm doing wrong? I have an HP Pavillion dv7 and an HP w2338h external monitor. Thanks!

  Read the article

• Tracking the popularity of a package over time?

  - by DoR

  Is there any software or website that allows the user to view a graph of how popular a particular package is? The popcon.ubuntu.com site has raw information on how many people (who have installed popularity-contest) have installed a particular package, but it would be interesting to see how a package's popularity changes over time. I remember using a website that graphed this, but I don't know if it still exist.

  Read the article

• No Wi-Fi after system reboot

  - by ILya

  Something strange is happening... I've installed a Wi-Fi card into my Ubuntu Server 11.04 machine. To configure it I do the following: sudo vi /etc/network/interfaces add: iface wlan0 inet dhcp wpa-driver wext wpa-ssid "Sweet Home" wpa-ap-scan 1 wpa-proto WPA wpa-pairwise TKIP wpa-group TKIP wpa-key-mgmt WPA-PSK wpa-psk <A KEY> auto wlan0 then: $ sudo /etc/init.d/networking restart * Running /etc/init.d/networking restart is deprecated because it may not enable again some interfaces * Reconfiguring network interfaces... ssh stop/waiting ssh start/running, process 1522 ssh stop/waiting ssh start/running, process 1590 And my machine successfully gets an ip to my wireless adapter. But after reboot it doesn't get any ip in wireless network. To fix it I run /etc/init.d/networking restart again and all is fine again - it gets an ip. I understand that I simply should add it to my startup scripts to make it work properly, but maybe there is a better way to configure it?

  Read the article

• Acer Aspire blank screen

  - by Gerep

  I'm using Ubuntu 11.04 Natty and when I installed it I had a problem with blank screen on startup and found a solution but I have the same problem when it is inactive and goes blank screen, it won't come back, so I have to restart. Any ideas? Thanks in advance for any help. This is what solved my first problem: When you start editing the /etc/rc.local and add before exit 0: setpci -s 00:02.0 F4.B=00 Edit /etc/default/grub, edit the line GRUB_CMDLINE_LINUX_DEFAULT: GRUB_CMDLINE_LINUX_DEFAULT = "quiet splash acpi_osi = Linux" Update grub with: sudo update-grub2

  Read the article

• Stitch scanned images using CLI

  - by Adam Matan

  I have scanned a newspaper article which was larger than the scanner glass. Each page was scanned twice: the top and the bottom parts, where the middle part appeared in both images. Is there a way to quickly match and stitch these scanned images, preferably using CLI? The panorama stitching tools I know require lengthy configuration, which is mostly irrelevant: lens size, focus, angle etc. Hugin has a solution for this issue, but it isn't practical for batch jobs.

  Read the article

• Auto-mount in fstab no longer working until manually running 'sudo mount -a'

  - by Brett Alton

  I have 3 SMB shared drives I need to connect to for work purposes. I had Ubuntu 10.10 Maverick and had all my drives loaded into fstab to be auto-mounted. Everything worked fine for a while but just before I upgraded to 11.04 Natty, the fstab auto-mount stopped working. Unfortunately I don't know what changed I made to my machine or what update installed that made this occur. /etc/fstab {snip} //192.168.7.3/apache_proj/ /home/brett/Desktop/apache smbfs guest,rw,iocharset=utf8,uid=1000,gid=1000 0 0 //192.168.7.3/apache_54321/ /home/brett/Desktop/54321 smbfs guest,rw,iocharset=utf8,uid=1000,gid=1000 0 0 //freenas.local/shared/ /home/brett/Desktop/shared smbfs guest,rw,iocharset=utf8,uid=1000,gid=1000 0 0 //lamp/www/ /home/brett/Desktop/lamp smbfs username={snip},password={snip},rw,iocharset=utf8,uid=1000,gid=1000 0 0 When the machine boots, I run this command to get them to mount: $ sudo umount /home/brett/Desktop/54321 /home/brett/Desktop/shared /home/brett/Desktop/apache; sudo mount -a [sudo] password for brett: umount: /home/brett/Desktop/54321: not mounted umount: /home/brett/Desktop/shared: not mounted umount: /home/brett/Desktop/apache: not mounted Warning: mapping 'guest' to 'guest,sec=none' Warning: mapping 'guest' to 'guest,sec=none' Warning: mapping 'guest' to 'guest,sec=none' mount error: could not resolve address for lamp: No address associated with hostname (I run that umount as a just-in-case). I looked through dmesg and some error logs and couldn't see why fstab was failing on my mounts. I see that my 'lamp' directive is failing, but that's because the machine is currently down.

  Read the article

• Accidental deletion of the Gmail (IMAP) Trash 'System Label' in Evolution

  - by user20635

  I am using 11.04 and Evolution 2.32.2 I accidentally deleted the Gmail (IMAP) Trash 'System Label' in Evolution. Because this is Gmail object and (not a label per say), it is not deletable in Gmail. Under my Gmail account settings, I have made sure that both, 'Show in Label List' and 'Show in IMAP' are checked. That being said, I cannot seem to restore this IMAP folder in Evolution. I deleted the affected mail account, re-created, restarted Evolution, and no change. Any thoughts? Thanks.

  Read the article

• Loads wrong resolution when installing

  - by Kevin DB

  I'm trying to install Ubuntu 11.04 from a USB. My computer does load the USB file and I get some sort of BIOS-like screen where I can choose between 'Install from USB' and 'Boot-up from USB'. When I entered the corresponding number my screen resolution is totally messed up. I see that Ubuntu is starting up when I used Boot from USB, but the screen looks the same as you'd have a too high screen resolution. Same story with Install from USB. I can see the screens loading and the menu's and stuff, but not clearly because it load in a too high screen resolution. I'm trying to dual-boot is with Windows XP and max. screen resolution is 800x600.

  Read the article

• Nautilus Image Converter: strip EXIF metadata

  - by plua

  I just found out that images can have more than 20KB of EXIF data. Not really an issue with 2MB files, but if you have small thumbnails this really adds up. I use mogrify often to resize, and I can use mogrify -strip to remove the EXIF data. However, if I use Nautilus Image Converter there is no way to strip this data. Is there something in the configuration I can set so it always automatically adds the -strip flag to the command?

  Read the article

• Can I use a desktop as a network server?

  - by Jhourlad Estrella

  Pardon me if I'm asking the wrong question. But I am a newbie in networking and I'm not sure what direction to go on this. I have just setup an Ubuntu Desktop. I am planning to convert it to a network server without losing the GUI interface (again, I'm a newbie) and use it to manage and monitor user access to a network with a small number of network terminals all running on Windows. My purpose is to use the new server to filter sites accessed by each terminals, monitor sites being visited by employees and grant access to both group and user-specific folders based on their IP address. Is this possible? What server software do I need to install? How do I structure the hardware? (I have a router, a hub, the Ubuntu server and the network terminals) How do I assign privileges to users and monitor them at the same time? Thank you in advance for your replies.

  Read the article

• List of custom Launchers & Quicklists for Unity

  - by Nik

  Creating a custom launcher for unity is simple. Quicklists provide a easy and efficient way to quickly access commonly used tasks for a specific application. The steps to create a custom launcher is easy. Right-click on your desktop and click create a launcher. Edit the .desktop file using a text editor and using this you can create static quicklists for the Unity. (more info here and here) So what custom launchers do you use on Unity? Note: Please limit one answer per custom launcher. Also please do provide a screenshot of it in action.

  Read the article

• My new DNS change works from America but not Sweden

  - by Dougie

  Several hours ago i changed nameserver and DNS info on one of my domains at my domainregistar. When i access the domain from my home computers and when my friends access the domain they get to the old ip-adress hosting the dead site(We all live in Sweden). But when i access the website from my mobile phone or through google.com/translate or North American proxies the website is shown like it should. Why is this?, does it take time for change to take effect for diffrent locations/countries? I find it very strange and would like to start using my site now. Do you think it will change or could i've been doing something wrong?

  Read the article

• What Ranking Factors Are Used For International Search?

  - by Itai

  Google.com vs Google.ca vs Google.co.uk (etc) all rank their results differently. The intention is to return more locally-relevant content. What factors, other than the ones below, are used to determine local relevancy? I already know the TLD (.com, .ca, etc) and likely the server IP address is used but there has to be more as this would not explain some search results I noticed this week. Particularly, I see a US-based site ranking #3 for some keywords on Google.com, ranking #5 on Google.ca and not ranking within the first pages on Google.co.uk. On Google.com it outranks a Australian site which outranks it on Google.ca. The site itself is relevant for all English-speaking locations and it being outranked by sites from different regions on different Google TLDs (but not ones from the same region as the TLD).

  Read the article

• 1and1: Unable to host an external domain

  - by Django Reinhardt

  I'm sorry if this isn't the right place for this question, but I'm presently having difficulties with my hosting provider (1and1). Two weeks ago, two of my clients bought hosting from them on my recommendation, but as it turned out, 1and1 are having severe technical difficulties. Right now non of their hosting packages are able to accept ANY external domains. So either you pay the costs of transferring the registrar of your domain, or you use the ugly 1and1 domain name. Not any good for a hosting company of 1and1's reputation! They have been promising me for two weeks that they're going to fix the problem, but as you have probably guessed by now, that hasn't been the case. I would like to know if a) Anyone else is in the same boat as me, and b) If there are other comparably reputable hosting providers that I should consider moving to instead? Very disappointing! :( Note: This is for 1and1 in the UK. I imagine it isn't affecting users in other countries(?) Clarification: 1and1 are unable to accept ANY external domains. That means that even if you update your DNS details on your domain, their system cannot be updated to add your external domain to your account.

  Read the article

• Should plus be encoded in mailto: hyperlinks?

  - by Jeff Atwood

  When placing an email address with an address tag (aka sub-addressing) in a mailto hyperlink … <a href="mailto:[email protected]">mail us now!</a> … should the plus in the email be URL encoded? <a href="mailto:username%[email protected]">mail us now!</a> I can't figure this out, and the documentation is conflicting. Our real world tests have produced mixed results as well, making it even more confusing.

  Read the article

• What browser is sending user agent beginning mozilla/5.0+, tramslates & into &amp;

  - by Patrick

  We've got a website which has been running for a few years now. One of our customers has just started having an intermittent problem. Looking at our iis6.0 logs the service works correctly when they have a user agent beginning "mozilla/4.0+" but fails when the user agent begins "mozilla/5.0+". The particular customer only started having this problem on Wednesday. Does anyone know the browser/upgrade which changes the 4.0 to 5.0? The actual problem caused is that an "&" in a url parameter list is being encoded as "&amp;". Anyone seen anything similar? We have other users sending from browsers with the 5.0+ user agent without trouble. Sorry about the tags but don't have the rep to create new ones. Thanks in advance, Patrick Edit: hi Viper_sb, It is most probably a custom script (I'm primarily a c++ developer so don't really understand). Our site services requests from other customer developed sites, this one was done in Java script as far as I know. we're actually getting a variety of user agents (presumably depending on which of our customers customers is accessing the service), here's a few: Mozilla/5.0+(Windows;+U;+Windows+NT+6.1;+fr;+rv:1.9.1.11)+Gecko/20100701+Firefox/3.5.11 Mozilla/5.0+(Windows;+U;+Windows+NT+5.1;+en-US)+AppleWebKit/533.4+(KHTML,+like+Gecko)+Chrome/5.0.375.126+Safari/533.4 302 0 0 Mozilla/5.0+(Macintosh;+U;+PPC+Mac+OS+X;+fr)+AppleWebKit/523.12+(KHTML,+like+Gecko)+Version/3.0.4+Safari/523.12 Mozilla/5.0+(Windows;+U;+Windows+NT+5.1;+en-US;+rv:1.9.2.8)+Gecko/20100722+Firefox/3.6.8 Mozilla/5.0+(Windows;+U;+Windows+NT+5.1;+fr;+rv:1.9.2.8)+Gecko/20100722+Firefox/3.6.8+(.NET+CLR+3.5.30729)

  Read the article

• Integrating PHPBB With DokuWiki

  - by Christofian

  I have a site with a phpbb forum. I'm working on adding a dokuwiki wiki to the site, and I would like to integrate the two. The phpbb forum is running phpbb 3.0.8, and the dokuwiki installation is running 2011-05-25a "Rincewind". Basically what I want is: for users to be able to log into the dokuwiki wiki with their phpbb account. Users should only be able to register from the phpbb registration interface. Cookie integration would be nice, but is not required. Is there any way to do this?

  Read the article

• Artists and music - Need Help Deciding on a CMS

  - by infty

  A friend has asked me to build a site with the following options: staff members must be able to add new music and artists to the page a gallery must be provided - it is also good if each artist has the ability to have his/her own smaller gallery users must be able to vote for artists users must be able to alter in discussions (forums or comments sections) staff members must be able to blog staff members must be able to write articles I did a small project where i actually implemented all of these features, but I want to use an existing content management system for all of these features so that future developers can, hopefully, more easy extend the website. And also, so that I don't have to provide too much documentation. I have never developed a website using an external CMS like Drupal or Wordpress and after seeing hours of tutorial videos of both systems, I still can't make up my mind on whether i should : a) use Drupal 7 b) use Wordpress 3 c) create my own cms I can imagine that staff members would also want to create content using iPhone or android based mobile devices, but this is not a required feature. Can someone, with experience, please tell me about their experiences with larger projects like this? The site will have approximately 400 000 - 500 000 visitors (not daily visitors, based on numbers from last year in a period of 4 months)

  Read the article

• client website compromised, found a strange .php file. any ideas?

  - by Kevin Strong

  I do support work for a web development company and I found a suspicious file today on the website of one of our clients called "hope.php" which contained several eval(gzuncompress(base64_decode('....'))) commands (which on a site like this, usually indicates that they've been hacked). Searching for the compromised site on google, we got a bunch of results which link to hope.php with various query strings that seem to generate different groups of seo terms like so: (the second result from the top is legitimate, all the rest are not) Here is the source of "hope.php": http://pastebin.com/7Ss4NjfA And here is the decoded version I got by replacing the eval()s with echo(): http://pastebin.com/m31Ys7q5 Any ideas where this came from or what it is doing? I've of course already removed the file from the server, but I've never seen code like this so I'm rather curious as to its origin. Where could I go to find more info about something like this?

  Read the article

• Channelling an explosion along a narrow passage

  - by finnw

  I am simulating explosions in a 2D maze game. If an explosion occurs in an open area, it covers a circular region (this is the easy bit.) However if an explosion occurs in a narrow passage (i.e narrower than the blast range) then it should be "compressed", so that it goes further and also it should go around corners. Ultimately, unless it is completely boxed-in, then it should cover a constant number of pixels, spreading in whatever direction is necessary to reach this total area. I have tried using a shortest-path algorithm to pick the nearest N pixels to the origin avoiding walls, but the effect is exaggerated - the blast travels around corners too easily, making U-turns even when there is a clear path in another direction. I don't know whether this is realistic or not but it is counter-intuitive to players who assume that they can hide around a corner and the blast will take the path of least resistance in a different direction. Is there a well-known (and fast) algorithm for this?

  Read the article

• In esenthel engine how can I remove some object from Gui class?

  - by Gajet

  I know many people in this site may not know esenthel engine at all and my question may be better answered at engine forum but I'm putting it here to share the name of a real easy to code gameengine with all of you: you can easily add a Button for example to your GUI class (gui is it's shared instance) with Gui += buttonInstance.create("click on me") but I'm just wondering how can you remove an on object from from Gui members. as far as I know there is no such a method as removeChild or getChildren or anything similar.

  Read the article

• Bitmap & Object Collision Help

  - by MarkEz

  Is it possible to detect when an object and a bitmap collide. I have an arraylist of sprites that I am shooting with an image. I tried using this method here but as soon as the bitmap appears the sprite disappears, this is in the Sprite class: public boolean isCollision(Bitmap other) { // TODO Auto-generated method stub if(other.getWidth() > x && other.getWidth() < x + width && >other.getHeight() > y && other.getHeight() < y + height); return true; }

  Read the article

• merging UIImagePickerController image with cameraOverlayView

  - by GameDev

  Im really in the need for some help and advice. Spent the last week on this and have now just become frustrated as i cant get it to work! Basically, im trying to merge two images into one image to display/save. First the user picks an image from album, it goes to edit image screen where user can move and scale the image. On this screen is an overlay image (320x480) for the person to align there eyes in. Once aligned I want to save this image (edited and overlay) into one and pass the image onto my next screen. It works fine when the image is filling the edit/crop box, but when the image is widescreen with top and bottom not filling the box, then when i save the image the coords of the overlay dont get saved correctly! Heres my code, ive tried various ways of doing this but have failed at every attempt :( - (void) imagePickerController:(UIImagePickerController *)picker didFinishPickingMediaWithInfo:(NSDictionary *)info { // Access the cropped image from info dictionary UIImage *image = [info objectForKey:@"UIImagePickerControllerEditedImage"]; // Combine image with overlay before saving!! image = [self addOverlayToImage:image]; overlayGraphicView.image = nil; // Take the picture image to the post picture view controller postPictureView = [[PostPictureViewController alloc] init:image Company:companyName withLink:buyButtonLink]; [picker pushViewController:postPictureView animated:YES]; [picker release],picker = nil; } The problem is that the image picked (originalImage) could be of any height, my overlayImage is however always 320x480, its almost all transparent with just two eye images in center which i want to save over the original images eyes! - (UIImage*) addOverlayToImage:(UIImage*)originalImage { CGRect cgRect =[[UIScreen mainScreen] bounds]; CGSize size = cgRect.size; UIGraphicsBeginImageContext(size); [originalImage drawInRect:CGRectMake(0, 0, size.width, size.height)]; UIImage* overlayImage = [UIImage imageNamed:overlayGraphicName]; [(UIImage *)overlayImage drawInRect:CGRectMake(0, 0, size.width, size.height)]; UIImage *finalImage = UIGraphicsGetImageFromCurrentImageContext(); [finalImage retain]; UIGraphicsEndImageContext(); return finalImage; } I wish there was just an easy way to take a screenshot of whatever is in the edit crop box :( Please if someone could help me with this ASAP as I need to finish this in 1-2 days time! Thank you. EDIT:- I should also mention that with this I get the correct center of the screen and placement of the overlay on my next screen: [(UIImage *)overlayImage drawInRect:CGRectMake(0, 0, size.width, size.height)]; However, I am unable to work out the correct position of the main image especially as the height is different for every image if not fullscreen! I tried this to center it into the correct position but it doesnt work: [originalImage drawInRect:CGRectMake(0,(size.height/2 - originalImage.size.height/2), originalImage.size.width, originalImage.size.height)];

  Read the article

• Jekyll - How to approach asset processing (minification, spriting...)

  - by Gromix

  I recently switched to Jekyll and I find the conversion pipeline works really well. However I'm stuck on which approach to take when the process is many inputs to one output (ex: concatenating CSS files, creating image sprites...) I know several tools that can do it, that can be called either from the command line or in Ruby code directly. For ex: Jammit css sprites Compass sprites My current solution is a few Jekyll plugins that call these tools. However, it has the following problems: 1. SASS files should be processed, then concatenated/minified SASS-CSS is a Converter, and the concatenation is a Generator run on the output. Unfortunately generators are run first, which means the concatenation is always a step behind (I have to run the build twice) 2. Jekyll does not know about the source/output relationship With converters, when I run Jekyll in server mode, if I change a SASS file it automatically runs the conversion to CSS. When dealing with concatenation/spriting, I haven't found a way to do the same. I end up having to run a "normal" Jekyll build (not server auto) to update the concatenated files and sprites. Thanks for any ideas!

  Read the article

< Previous Page | 83 84 85 86 87 88 89 90 91 92 93 94  | Next Page >