Daily Archives

Articles indexed Tuesday August 19 2014

Page 9/20 | < Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >

• TFTP PUT Failing Across Hosts

  - by Jason

  I have a TFTP server installed on a CentOS host. /etc/xinetd.d/tftp: service tftp { disable = no socket_type = dgram protocol = udp wait = yes user = root server = /usr/sbin/in.tftpd server_args = -c -s /var/lib/tftpboot per_source = 11 cps = 100 2 flags = IPv4 } If I try to PUT a file from a remote host to the host running the TFTP server, I get Transfer Timed Out - however, it does create the file in /var/lib/tftpboot but the file is empty. If I tftp from the tftp server to itself (localhost) and PUT a file, it works fine. I have verified that SELinux is disabled and IPTables are turned off. I can connect from the remote hosts with no issue - just seems to be the PUT I have issue with: [root@SVR01 TEST]# tftp 10.100.2.15 tftp> status Connected to 10.100.2.15. Mode: netascii Verbose: off Tracing: off Literal: off Rexmt-interval: 5 seconds, Max-timeout: 25 seconds tftp>

  Read the article

• Exchange Management Console Listing Extra Servers

  - by Zak G

  I recently decommissioned an Old Exchange 2003 server. Prior to the decommissioning, the environment consisted of 2 EXCH 2010 and that one EXCH 2003 server. I went through all the steps listed in Microsoft documents and online in how to remove the server completely (pruning the AD and all that jazz). When I go to Exchange Management Console it still lists 3 total servers in the "Server Summary" column in the Organizational Health tab. When I click manage servers, it only lists the 2 EXCH 2010 servers. I am aware this is only a cosmetic issue but I would appreciate it if anyone can share some advice on how to fix the issue.

  Read the article

• "No more threads can be created in the system" in Network and Sharing Center

  - by Zell Faze

  A while back I noticed on one of our laboratory computers (Windows 7, very little extra software installed) that the network connection icon in the system tray would claim that it had no network connection, even though it did. This issue would go away after the computer was rebooted, but would surface again the next time I looked at the computer (a few days later). Upon opening the Network and Sharing Center I am shown an actual error message, but not one that seems to give me a lot of information about what the problem is. In the place of the usual information about network adapters and whether you are connected to the Internet it simply says: "No more threads can be created in the system." The Event Viewer shows hundreds of events from different services also with the same message. "Volume Shadow Copy Service error: Unexpected error calling routine CoCreateInstance. hr = 0x800700a4, No more threads can be created in the system."; "The WinHTTP Web Proxy Auto-Discovery Service service failed to start due to the following error: A thread could not be created for the service."; "The IP Helper service terminated with the following error: No more threads can be created in the system." As far as I can tell, this message seems to mean that there is some sort of resource leak in Windows where something is creating a large number of threads and those threads are not being killed off? I've tried restarting WMI and several services related to networking, without avail. Can anyone provide more information on what "No more threads can be created in the system" might mean and what I might be able to do to fix the issue? Currently the only solution appears to be restarting.

  Read the article

• How to monitor an Amazon EC2 instance

  - by sektor

  Is there a way to monitor ec2 instances without using cloudwatch? I ask this since ec2 instances are basically VPS's, and using output from commands like top, vmstat, htop in scripts may not give the clear picture as the CPU cycles are shared between other instances as well. What should one keep in mind while monitoring CPU usage on a VPS?, should one have alerts based on top load or % of CPU used by user processes coupled with other factors like processes waiting on disk io, hardware interrupts?

  Read the article

• RHEL Java Application returns "No space left on device" but only 3% used

  - by FiveO

  My Java Application returns following Exception when saving a new file in /opt/wso2 on a CentOS 6.4: Caused by java.io.FileNotFoundException: ... (No space left on device) Caused by: java.io.FileNotFoundException: /opt/wso2/FrameworkFiles/trk_2014062500042488825_TRCK_PatfallHospis_pFromHospis_66601fb3-a03c-4149-93c3-6892e0a10fea.txt (No space left on device) at java.io.FileOutputStream.open(Native Method) at java.io.FileOutputStream.<init>(FileOutputStream.java:212) at java.io.FileOutputStream.<init>(FileOutputStream.java:99) at com.avintis.esb.framework.adapter.wso2.FrameworkAdapterWSO2.sendMessages(FrameworkAdapterWSO2.java:634) ... 23 more But when I run df -a I can see that the partition still has plenty of space available: [root@stzsi466 wso2]# df -a Filesystem 1K-blocks Used Available Use% Mounted on /dev/mapper/vg_stzsi466-lv_root 12054824 2116092 9326380 19% / proc 0 0 0 - /proc sysfs 0 0 0 - /sys devpts 0 0 0 - /dev/pts tmpfs 4030764 0 4030764 0% /dev/shm /dev/sda1 495844 53858 416386 12% /boot /dev/sdb1 51605436 1424288 47559744 3% /opt/wso2 none 0 0 0 - /proc/sys/fs/binfmt_misc [root@stzsi466 ~]# df -i Filesystem Inodes IUsed IFree IUse% Mounted on /dev/mapper/vg_stzsi466-lv_root 765536 45181 720355 6% / tmpfs 1007691 1 1007690 1% /dev/shm /dev/sda1 128016 44 127972 1% /boot /dev/sdb1 3276800 6137 3270663 1% /opt/wso2 What is the problem here? Is it caused by the Java on CentOS 6.4? I have another server running Redhat REHL 6.4 and all works fine - same Java etc. Does anyone know of this problem?

  Read the article

• Created a new zone in DNS manager - can't get site bindings to work in iis 7

  - by nick gowdy

  Firstly I would like to say that I am a noob when it comes to DNS, I am a web developer and I am trying to setup an intranet site for a charity. I have windows server 2008 and I installed both iis 7 and dns manager. In IIS I have this binding that works - Type: http:// IP Address: 192.168.1.9 Port: 80 Host name: My host name is empty and when I try to navigate to this website on the network, the http code is 200 and the page renders. Now if I try Host name of test.organization.intranet Internet explorer says "Internet Explorer cannot display the webpage" and the server response is aborted. In DNS manager I created a new forward lookup zone of organization.intranet I did this through the configure a dns server wizard and I created a host (A) with the same IP as the one being used in IIS. The full Host name is test.organization.intranet but it doesn't work. Maybe I am missing something obvious because it's not an area of IT that I know very well, but I am stuck for why I can't get it to work.

  Read the article

• Using gitlab behind Apache proxy all generated urls are wrong

  - by Hippyjim

  I've set up Gitlab on Ubuntu 12.04 using the default package from https://about.gitlab.com/downloads/ {edit to clarify} I've set up Apache to proxy and run the nginx server the package installed on port 8888 (or so I thought). As I had Apache installed already I have to run nginx on localhost:8888. The problem is, all images (such as avatars) are now served from http://localhost:8888, and all the checkout urls Gitlab gives are also localhost - instead of using my domain name. If I change /etc/gitlab/gitlab.rb to use that url, then Gitlab stops working and gives a 503. Any ideas how I can tell Gitlab what URL to present to the world, even though it's really running on localhost? /etc/gitlab/gitlab.rb looks like: # Change the external_url to the address your users will type in their browser external_url 'http://my.local.domain' redis['port'] = 6379 postgresql['port'] = 2345 unicorn['port'] = 3456 and /opt/gitlab/embedded/conf/nginx.conf looks like: server { listen localhost:8888; server_name my.local.domain; [Update] It looks like nginx is still listening on the wrong port if I don't specify localhost:8888 as the external_url. I found this in /var/log/gitlab/nginx/error.log 2014/08/19 14:29:58 [emerg] 2526#0: bind() to 0.0.0.0:80 failed (98: Address already in use) 2014/08/19 14:29:58 [emerg] 2526#0: bind() to 0.0.0.0:80 failed (98: Address already in use) 2014/08/19 14:29:58 [emerg] 2526#0: bind() to 0.0.0.0:80 failed (98: Address already in use) 2014/08/19 14:29:58 [emerg] 2526#0: bind() to 0.0.0.0:80 failed (98: Address already in use) 2014/08/19 14:29:58 [emerg] 2526#0: bind() to 0.0.0.0:80 failed (98: Address already in use) 2014/08/19 14:29:58 [emerg] 2526#0: still could not bind() Apache setup looks like: <VirtualHost *:80> ServerName my.local.domain ServerSignature Off ProxyPreserveHost On AllowEncodedSlashes NoDecode <Location /> ProxyPass http://localhost:8888/ ProxyPassReverse http://127.0.0.1:8888 ProxyPassReverse http://my.local.domain </Location> </VirtualHost> Which seems to proxy everything back ok if Gitlab listens on localhost:8888 - I just need Gitlab to start displaying the right URL, instead of localhost:8888.

  Read the article

• git private server error: "Permission denied (publickey)."

  - by goddfree

  I followed the instructions here in order to set up a private git server on my Amazon EC2 instance. However, I am having problems when trying to SSH into the git account. Specifically, I get the error "Permission denied (publickey)." Here are the permissions of my files/folders on the EC2 server: drwx------ 4 git git 4096 Aug 13 19:52 /home/git/ drwx------ 2 git git 4096 Aug 13 19:52 /home/git/.ssh -rw------- 1 git git 400 Aug 13 19:51 /home/git/.ssh/authorized_keys Here are the permissions of my files/folders on my own computer: drwx------ 5 CYT staff 170 Aug 13 14:51 .ssh -rw------- 1 CYT staff 1679 Aug 13 13:53 .ssh/id_rsa -rw-r--r-- 1 CYT staff 400 Aug 13 13:53 .ssh/id_rsa.pub -rw-r--r-- 1 CYT staff 1585 Aug 13 13:53 .ssh/known_hosts When checking my logs in /var/log/secure, I used to get the following error message every time I tried to SSH: Authentication refused: bad ownership or modes for file /home/git/.ssh/authorized_keys However, after making a few permission changes, I no longer get this error message. Despite this, I am still getting the "Permission denied (publickey)." message every time I try to SSH. The command I am using to SSH is ssh -T git@my-ip. Here is the full log I get when I run ssh -vT [email protected]: OpenSSH_6.2p2, OSSLShim 0.9.8r 8 Dec 2011 debug1: Reading configuration data /etc/ssh_config debug1: /etc/ssh_config line 20: Applying options for * debug1: Connecting to my-ip [my-ip] port 22. debug1: Connection established. debug1: identity file /Users/CYT/.ssh/id_rsa type -1 debug1: identity file /Users/CYT/.ssh/id_rsa-cert type -1 debug1: identity file /Users/CYT/.ssh/id_dsa type -1 debug1: identity file /Users/CYT/.ssh/id_dsa-cert type -1 debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_6.2 debug1: Remote protocol version 2.0, remote software version OpenSSH_6.2 debug1: match: OpenSSH_6.2 pat OpenSSH* debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr [email protected] none debug1: kex: client->server aes128-ctr [email protected] none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Server host key: RSA 08:ad:8a:bc:ab:4d:5f:73:24:b2:78:69:46:1a:a5:5a debug1: Host 'my-ip' is known and matches the RSA host key. debug1: Found key in /Users/CYT/.ssh/known_hosts:1 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Trying private key: /Users/CYT/.ssh/id_rsa debug1: Trying private key: /Users/CYT/.ssh/id_dsa debug1: No more authentication methods to try. Permission denied (publickey). I have spent a few hours going through threads on various sites, including SO and SF, looking for a solution. It seems that the permissions for my files are all okay, but I just can't figure out the problem. Any help would be greatly appreciated. Edit: EEAA: Here are the outputs you requested: $ getent passwd git git:x:503:504::/home/git:/bin/bash $ grep ssh ~git/.ssh/authorized_keys | wc -l grep: /home/git/.ssh/authorized_keys: Permission denied 0

  Read the article

• imapsync - Authentication failed

  - by Touff

  I've deployed many Google Apps accounts and have used imapsync a number of times to migrate accounts to Google Apps. This time however, no matter what I try imapsync refuses to work claiming my credentials are incorrect - I've checked them time and time again and they are 100% correct. On Ubuntu 12, built from source, my command is: imapsync --host1 myserver.com --user1 [email protected] --password1 mypassword1 -ssl1 --host2 imap.gmail.com --user2 [email protected] --password2 mypassword2 -ssl2 -authmech2 PLAIN Full output from the command: get options: [1] PID is 21316 $RCSfile: imapsync,v $ $Revision: 1.592 $ $Date: With perl 5.14.2 Mail::IMAPClient 3.35 Command line used: /usr/bin/imapsync --debug --host1 myserver.com --user1 [email protected] --password1 mypassword1 -ssl1 --host2 imap.gmail.com --user2 [email protected] --password2 mypassword2 -ssl2 -authmech2 PLAIN Temp directory is /tmp PID file is /tmp/imapsync.pid Modules version list: Mail::IMAPClient 3.35 IO::Socket 1.32 IO::Socket::IP ? IO::Socket::INET 1.31 IO::Socket::SSL 1.53 Net::SSLeay 1.42 Digest::MD5 2.51 Digest::HMAC_MD5 1.01 Digest::HMAC_SHA1 1.03 Term::ReadKey 2.30 Authen::NTLM 1.09 File::Spec 3.33 Time::HiRes 1.972101 URI::Escape 3.31 Data::Uniqid 0.12 IMAPClient 3.35 Info: turned ON syncinternaldates, will set the internal dates (arrival dates) on host2 same as host1. Info: will try to use LOGIN authentication on host1 Info: will try to use PLAIN authentication on host2 Info: imap connexions timeout is 120 seconds Host1: IMAP server [SERVER1] port [993] user [USER1] Host2: IMAP server [imap.gmail.com] port [993] user [USER2] Host1: * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE AUTH=PLAIN AUTH=LOGIN] Dovecot ready. Host1: SERVER1 says it has CAPABILITY for AUTHENTICATE LOGIN Host1: success login on [SERVER1] with user [USER1] auth [LOGIN] Host2: * OK Gimap ready for requests from MY-VPS Host2: imap.gmail.com says it has CAPABILITY for AUTHENTICATE PLAIN Failure: error login on [imap.gmail.com] with user [USER2] auth [PLAIN]: 2 NO [AUTHENTICATIONFAILED] Invalid credentials (Failure) I have tried -authmech2 LOGIN as well which returns: Host2: imap.gmail.com says it has NO CAPABILITY for AUTHENTICATE LOGIN Failure: error login on [imap.gmail.com] with user [[email protected]] auth [LOGIN]: 2 NO [AUTHENTICATIONFAILED] Invalid credentials (Failure) If anyone can shed some light on this I would greatly appreciate it.

  Read the article

• Exchange 2010 - Certificate error on internal Outlook 2013 connections

  - by Lorenz Meyer

  I have an Exchange 2010 and Outlook 2003. The exchange server has a wildcard SSL certificate installed *.domain.com, (for use with autodiscover.domain.com and mail.domain.com). The local fqdn of the Exchange server is exch.domain.local. With this configuration there is no problem. Now I started upgrading all Outlook 2003 to Outlook 2013, and I start to get consistently a certificate error in Outlook : The Name on the security certificate is invalid or does not match the name of the site I understand why I get that error: Outlook 2013 is connecting to exch.domain.local while the certificate is for *.domain.com. I was ready to buy a SAN (Subject Alternate Names) Certificate, that contains the three domains exch.domain.local, mail.domain.com, autodiscover.domain.com. But there is a hindrance: the certificate provider (in my case Godaddy) requires that the domain is validated as being our property. Now it is not possible for an internal domain that is not accessible from the internet. So this turns out not to be an option. Create self-signed SAN certificate with an Enterprise CA is an other option that is barely viable: There would be certificate error with every access to webmail, and I had to install the certificate on all Outlook clients. What is a recommended viable solution ? Is it possible to disable certificate checking in Outlook ? Or how could I change the Exchange server configuration so that the public domain name is used for all connections ? Or is there another solution I'm not thinking of ? Any advice is welcome.

  Read the article

• IAM / AWS Access control via Windows Azure Active Directory

  - by Haroon

  I am trying to figure out how to configure IAM in Amazon AWS to use Windows Azure Active Directory. I found http://blogs.aws.amazon.com/security/post/Tx71TWXXJ3UI14/Enabling-Federation-to-AWS-using-Windows-Active-Directory-ADFS-and-SAML-2-0, however it is about configuring ADFS. WAAD supports SAML 2.0 http://azure.microsoft.com/en-us/documentation/articles/fundamentals-identity/ Has anyone figured it out yet?

  Read the article

• Can Vagrant point to a directory of Puppet manifests for execution?

  - by SeligkeitIstInGott

  I am using Vagrant to jump start some initial Puppet config and am confused on how to include/run multiple manifests (other than just site.pp) in the puppet execution workflow without making the extra manifests into modules and including them that way. In the puppet manifests directory that I point Vagrant to (see below) I have two manifests that I want executed: site.pp and hierasetup.pp. config.vm.provision "puppet" do |puppet| puppet.manifests_path = "puppet_files/manifests" puppet.module_path = "puppet_files/modules" puppet.manifest_file = "site.pp" puppet.options = "--verbose --debug" end Currently I am having site.pp be the manifest that calls hierasetup.pp. My site.pp looks like this: File { owner => 'root', group => 'root', mode => '0644', } import "hierasetup.pp" include jboss But I get this error about the deprecation of "import": Warning: The use of 'import' is deprecated at /tmp/vagrant-puppet-1/manifests/site.pp:33. See http://links.puppetlabs.com/puppet-import-deprecation (at grammar.ra:610:in `_reduce_190') According to the referenced URL under "Things to try instead" it says "To keep your node definitions in separate files, specify a directory as your main manifest". Further this puppet doc on main manifests says: "Recommended: If you’re using the main manifest heavily instead of relying on an ENC, consider changing the manifest setting to $confdir/manifests. This lets you split up your top-level code into multiple files while avoiding the import keyword. It will also match the behavior of simple environments." It appears that Puppet can reference an entire directory instead of just a specific manifest file, such that I would expect that Vagrant would make a provision for this and allow me to drop the "puppet.manifest_file = "site.pp" line and point to the parent directory instead in which all the *.pp files there will be executed. However removing that line in Vagrant merely generates a complaint about an expected "default.pp" in its stead: puppet provisioner: * The configured Puppet manifest is missing. Please specify a path to an existing manifest: /some/path/puppet_files/manifests/default.pp So: Firstly, do I understand the "new" (non-import) way of calling multiple manifests correctly, in that a directory is to be pointed to in which all the *.pp files inside it will be executed? And secondly, has Vagrant "caught up" with this new change to accommodate the referencing of directories in conjunction with Puppet's deprecation of "import"? Update: Thanks to Shane the issue with #2 (Vagrant's code not being caught up to allow pointing to puppet manifest directories) was reported on Vagrant's GitHub issue tracker site and has since been patched: https://github.com/mitchellh/vagrant/issues/4169

  Read the article

• How would one run a task sequence within a task sequence in SCCM 2012 SP1

  - by BigHomie

  A Shining Example: Inside all of my task sequences I have a group that installs driver packages conditionally based on computer model: And of course, this list does nothing but grow. The fact that it grows isn't a big deal, what is a big deal is that every time it changes I have to manually copy and paste those changes across every task sequence I have, which of course leaves huge room for human error. The same goes for other groups of tasks that are common across task sequences. Looking for a solution where I could centrally manage these tasks, be it link other task sequences to a group within another task sequence, or create a separate task sequence and link to that. I came across a solution by John Marcum (SCCM MVP) that mentioned this ability, but this was a while ago and I can't find the link to it anymore to see if it's even still being updated/maintained, but I'm looking for more of a free solution, or even using Powershell or the ConfigMgr SDK is fine with me, I'm no stranger to either. Update Getting close: http://msdn.microsoft.com/en-us/library/jj217869.aspx

  Read the article

• How to test if DNS information has propagated?

  - by Andrew

  I set up a new DNS entry for one of my subdomains (I haven't set up any Apache virtual hosts or anything like that yet). How can I check that the DNS information has propagated? I assumed that I could simply ping my.subdomain.com and assume that if it could resolve, it would show the IP address I specified in the A record. However, I don't know if I am assuming correctly. What is the best way to check this information?

  Read the article

• OpenVZ Can't initialize containers after install

  - by Tonino Jankov

  I have installed OpenVZ on centos 6 on a dedicated server. I followed quick installation guide on openvz wiki. After installing thru yum, I don't know why, but grub.conf wasn't automatically updated to accomodate new kernel, so I had to do it manually. I edited grub.conf, added openvz kernel and rebooted - it went fine. Server went up into openvz kernel and it worked, it started openvz service byitself. But after I created a container, added IP to it and attempted to start it, I couldn't. Here is the output from the shell: [root@cloud2 ~]# vzctl start 86 Starting container ... Container is mounted Container start failed (try to check kernel messages, e.g. "dmesg | tail") Container is unmounted [root@cloud2 ~]# dmesg | tail [ 1973.401596] CT: 86: failed to start with err=-105 [ 2107.113850] Failed to initialize the ICMP6 control socket (err -105). [ 2107.155523] CT: 86: stopped [ 2107.155543] CT: 86: failed to start with err=-105 [ 6348.282184] Failed to initialize the ICMP6 control socket (err -105). [ 6348.330348] CT: 86: stopped [ 6348.330361] CT: 86: failed to start with err=-105 [45184.024002] Failed to initialize the ICMP6 control socket (err -105). [45184.072086] CT: 86: stopped [45184.072099] CT: 86: failed to start with err=-105 [root@cloud2 ~]# I don't know what is wrong. I tried different templates, debian 6, centos 6, i386, amd64, but the issue is the same. What is the problem?

  Read the article

• High memory utilization by sqlservr.exe process

  - by abdul samad

  Sub:High memory utilization by sqlservr.exe process. When I look into task manager --processes or by using perfmon memory counters(Sqlserver:memory manager:Target server memory and Total server memory) I am getting high memory utilization by sqlservr.exe process nearly 8 GB (Target server memory counter) and 7.95 GB (Total server memory). and when I restart the MSSQLSERVER service it again shoots up to the same size. I am getting this issue quite frequently. Please help me out in identifying why sql server is using so much memory and how to find out what query , stored procedure etc is making sql server use that much memory. * I am not using any triggers or cursors in my code. Thanks

  Read the article

• What's the equivalent of Wevtutil in XP or 2003?

  - by Matt

  I have a batch file for saving event logs to our shared drive. I want to do this for XP and Server 2003 without very much effort. What could I use since Wevtutil is only on Vista and up? rem Script start here rem Timestamp Generator set BACKUP_PATH=\\shared-drive\it\Temp\Event-Logs\ rem Parse the date (e.g., Thu 02/28/2013) set cur_yyyy=%date:~10,4% set cur_mm=%date:~4,2% set cur_dd=%date:~7,2% rem Parse the time (e.g., 11:20:56.39) set cur_hh=%time:~0,2% if %cur_hh% lss 10 (set cur_hh=0%time:~1,1%) set cur_nn=%time:~3,2% set cur_ss=%time:~6,2% set cur_ms=%time:~9,2% rem Set the timestamp format set timestamp=%cur_yyyy%%cur_mm%%cur_dd%-%cur_hh%%cur_nn%%cur_ss%%cur_ms% rem Set the computername format set servname=%computername% wevtutil epl System %BACKUP_PATH%\%servname%_%timestamp%_system.evtx wevtutil epl Application %BACKUP_PATH%\%servname%_%timestamp%_application.evtx wevtutil epl Security %BACKUP_PATH%\%servname%_%timestamp%_security.evtx rem End of Script

  Read the article

• apt unable to install particular version of package (but gives no error)

  - by Arc2009

  I'd like to install particular version of libstd++6 with following command: # apt-get install libstdc++6=4.9.0-8 -V Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: libstdc++6 (4.8.2-16) 0 upgraded, 0 newly installed, 0 to remove and 216 not upgraded. It gives no error, but apt keeps version that was already installed. And also it refers to this package as "extra". There's no apt preferences set in /etc/apt/preferences.d. And the desirable version is definetely available through our local mirror. (If I try to run "apt-get download libstdc++6=4.9.0-8" it will download exactly desirable version.) System info: # cat /etc/issue.net "Debian GNU/Linux jessie/sid" # uname -a Linux www27 3.13-1-amd64 #1 SMP Debian 3.13.7-1 (2014-03-25) x86_64 GNU/Linux. # dpkg -l |egrep -i "apt|dpkg" ii apt 0.9.16.1 amd64 commandline package manager ii dpkg 1.17.6 amd64 Debian package management system Any suggestions?

  Read the article

• WiFi: Connect to a network with hidden SSID in Windows 7

  - by Dor

  I have Windows 7 with the following station: D-Link DWA-160 Xtreme N Dual Band USB Adapter(rev.A2) (driver version 3.5.0.21). I'm trying to connect to a wireless network that has an hidden SSID with the command: Netsh wlan connect name="myNetworkProfile" The profile is configured to connect even if the network is not broadcasting its name (SSID). Despite that, the command fails promptly every time with the message: The network specified by profile "myNetworkProfile" is not available to connect. Nonetheless, when trying to connect manually using the dialog box (see image below), it successfully connects to the network after about 10 or 15 seconds. Also, Please - no need to elaborate about how useless the hidden SSID feature is.

  Read the article

• Low load average with plenty of cpu-intersive processes

  - by sds

  I see loadavg at about 1 with at least 3 processes running at full tile. How can that be? top - 11:48:32 up 147 days, 5:38, 8 users, load average: 1.08, 1.11, 1.05 Tasks: 416 total, 4 running, 410 sleeping, 2 stopped, 0 zombie Cpu0 : 43.3%us, 13.7%sy, 0.0%ni, 43.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu1 : 48.8%us, 12.4%sy, 0.0%ni, 38.8%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu2 : 0.7%us, 0.7%sy, 0.0%ni, 98.3%id, 0.0%wa, 0.0%hi, 0.3%si, 0.0%st Cpu3 : 99.3%us, 0.7%sy, 0.0%ni, 0.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu4 : 0.0%us, 0.3%sy, 0.0%ni, 99.7%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu5 : 5.7%us, 0.7%sy, 0.0%ni, 93.6%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu6 : 2.3%us, 0.3%sy, 0.0%ni, 97.4%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu7 : 0.3%us, 0.3%sy, 0.0%ni, 99.0%id, 0.0%wa, 0.0%hi, 0.3%si, 0.0%st Cpu8 : 38.4%us, 17.4%sy, 0.0%ni, 44.2%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu9 : 43.4%us, 13.5%sy, 0.0%ni, 43.1%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu10 : 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu11 : 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu12 : 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu13 : 0.3%us, 0.3%sy, 0.0%ni, 99.3%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu14 : 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu15 : 1.0%us, 0.7%sy, 0.0%ni, 98.3%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 132145404k total, 88125080k used, 44020324k free, 516476k buffers Swap: 8388600k total, 620232k used, 7768368k free, 55729064k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 25424 jonathan 20 0 4404m 4.1g 3268 R 99.7 3.3 212:58.17 python2.7 20939 sam 20 0 908m 733m 3376 R 81.2 0.6 603:08.07 python2.7 20987 sam 20 0 908m 732m 3376 R 79.8 0.6 598:49.18 python2.7 25428 jonathan 20 0 774m 164m 15m S 14.2 0.1 24:22.60 java 20996 sam 20 0 98.4m 7780 1880 S 4.3 0.0 17:48.15 vw 20941 sam 20 0 161m 70m 1880 S 3.0 0.1 18:10.03 vw 20940 sam 20 0 98.4m 8068 1880 S 2.6 0.0 18:06.28 vw 20942 sam 20 0 98.4m 8080 1880 S 2.6 0.0 17:39.45 vw 20944 sam 20 0 161m 71m 1880 S 2.6 0.1 17:29.29 vw 20947 sam 20 0 161m 71m 1880 S 2.6 0.1 17:25.58 vw 20959 sam 20 0 161m 70m 1880 S 2.6 0.1 17:28.00 vw 20962 sam 20 0 161m 70m 1880 S 2.6 0.1 17:26.96 vw 20963 sam 20 0 98.4m 8076 1880 S 2.6 0.0 18:07.19 vw 20965 sam 20 0 161m 71m 1880 S 2.6 0.1 18:08.13 vw 20995 sam 20 0 161m 71m 1880 S 2.6 0.1 17:38.67 vw 6399 root 20 0 558m 19m 5028 S 2.3 0.0 4329:56 BESClient 20945 sam 20 0 98.4m 8068 1880 S 2.3 0.0 17:35.38 vw 20948 sam 20 0 98.4m 8068 1880 S 2.3 0.0 17:26.01 vw 20950 sam 20 0 161m 70m 1880 S 2.3 0.1 17:25.79 vw 20952 sam 20 0 98.4m 8076 1880 S 2.3 0.0 17:32.94 vw 20955 sam 20 0 161m 70m 1880 S 2.3 0.1 17:26.61 vw 20956 sam 20 0 98.4m 8072 1880 S 2.3 0.0 17:34.76 vw 20960 sam 20 0 98.4m 8072 1880 S 2.3 0.0 17:34.04 vw Adding up CPU loads gives about 300%. The top process list also adds up to about 300%. Why is load average about 1?

  Read the article

• Run python script on server over ssh session in the background persistantly

  - by Stefan R. Falk

  I got an account from my professor for our universities CUDA server for running some tests. I am connecting via ssh over terminal. The thing is, as I close the terminal the server also seems to kill the running script. As I reconnect it has stopped. No it is not possible that the script already terminated since those test runs should take a few hours even on those machine.. Can anybody help me here? OS: Linux cuda01 3.13-1-amd64 #1 SMP Debian 3.13.7-1 (2014-03-25) x86_64 GNU/Linux

  Read the article

• Find visually similar images automatically?

  - by TERACytE

  I have a collection of images which is updated regularly that I'd like to group. Rather than reviewing every single image in the collection, I'd like to run an automated tool that pre-groups the images. Adobe PhotoShop Elements has a "Find Visually Similar photos" feature which works well, but it requires manually importing the images first, then I have to select an image each time I need Photoshop to search for images that are visually similar. I do not need a de-duping program since the images are never identical. Is there anything out there that can provide what I'm looking for?

  Read the article

• Document should be editable but not be able to be saved

  - by user359406

  I have a word document in 2010. The document is a series of questions to be asked to the customer. All the technicians open the document while talking to the customer. Technicians should be able to write in the document but if they try to save it, it should prevent them from doing so. How is this possible. In word 2007, I kept a password for the document. so it gives an options to do ready only if you don't know the password.

  Read the article

• How to make outlook.com/Office 365 use plain text and/or conventional quotes?

  - by user23122

  I am forced to use the web version of Outlook at Office 365. I really dislike how it formats e-mail as well as how it handles quoting when replying. In the desktop version of Outlook you can at least force it too display the messages in plain text and then you can manually bottom post/post interleaved. Plain text also changes how it handles quotes: " " is used rather than some braindead RTF version of format=flowed (I like format=flowed when it is implemented without bugs) although the attribution line is completely useless but in the online version I can't find a way to achieve even this. Any ideas? I guess a Greasemonkey script could do this?

  Read the article

• VBA + Polymorphism: Override worksheet functions from 3rd party

  - by phi

  my company makes extensive use of a data provider using a (closed source) VBA plugin. In principal, every query follows follows a certain structure: Fill one cell with a formula, where arguments to the formula specify the query the range of that formula is extended (not an arrray formula!) and cells below/right are filled with data For this to work, however, a user has to have a terminal program installed on the machine, as well as a com-plugin referenced in VBA/Excel. My Problem These Excelsheets are used and extended by multiple users, and not all of them have access to the data provider. While they can open the sheet, it will recalculate and the data will be gone. However, frequent recalculation is required. I would like every user to be able to use the sheets, without executing a very specific set of formulas. Attempts remove the reference on those computers where I do not have terminal access. This generates a NAME error i the cell containing the query (acceptable), but this query overrides parts of the data (not acceptable) If you allow the program to refresh, all data will be gone after a failed query Replace all formulas with the plain-text result in the respective cells (press a button and loop over every cell...). Obviously destroys any refresh-capabilities the querys offer for all subsequent users, so pretty bad, too. A theoretical idea, and I'm not sure how to implement it: Replace the functions offered by the plugin with something that will be called either first (and relay the query through to the original function, if thats available) or instead of the original function (by only deploying the solution on non-terminal machines), which just returns the original value. More specifically, if my query function is used like this: =GETALLDATA(Startdate, Enddate, Stockticker, etc) I would like to transparently swap the function behind the call. Do you see any hope, or am I lost? I appreciate your help. PS: Of course I'm talking about Bloomberg... Some additional points to clarify issues raise by Frank: The formula in the sheets may not be changed. This is mission-critical software, and its way too complex for any sane person to try and touch it. Only excel and VBA may be used (which is the reason for the previous point...) It would be sufficient to prevent execution of these few specific formulas/functions on a specific machine for all excel sheets to come This looks more and more like a problem for stackoverflow ;-)

  Read the article

< Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >