Search Results

Search found 118 results on 5 pages for 'bumblebee'.

Page 1/5 | 1 2 3 4 5  | Next Page >

  • Ubuntu 12.10 Nvidia GT555M Bumblebee

    - by herczigem
    I have laptop with Nvidia GT 555M video card. System Ubuntu 12.10, kernel Linux 3.5.0-17-generic step what i do: sudo add-apt-repository ppa:bumblebee/stable sudo add-apt-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get install bumblebee bumblebee-nvidia restart system optirun glxgears This message give me: Cannot access secondary GPU - error: Could not load GPU driver Aborting because fallback start is disabled. Open sudo gedit /etc/bumblebee/bumblebee.conf and change Driver= to Driver=nvidia and KernelDriver=nvidia-current to KernelDriver=nvidia. Restart the system and run optirun glxgears. This message gives me: The Bumblebee daemon has not been started yet or the socket path /var/run/bumblebee.socket was incorrect. Could not connect to bumblebee daemon - is it running? Anybody have idea?!

    Read the article

  • Bumblebee [ERROR]Cannot access secondary GPU - error: [XORG]

    - by Lunchbox
    Though this may seem like a duplicate question, none of the suggestions I've seen have worked for me, however nearly all posters get good results. I'll start with hardware: Metabox W350ST notebook Intel Core i7 4700 16GB RAM GTX 765M (with Optimus) 128GB SSD 1TB SSHD My initial error output when trying to optirun a game is: [ERROR]Cannot access secondary GPU - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please [133.973920] [ERROR]Aborting because fallback start is disabled. If anything else is needed to troubleshoot this just let me know. Adding bumblebee.conf: # Configuration file for Bumblebee. Values should **not** be put between quotes ## Server options. Any change made in this section will need a server restart # to take effect. [bumblebeed] # The secondary Xorg server DISPLAY number VirtualDisplay=:8 # Should the unused Xorg server be kept running? Set this to true if waiting # for X to be ready is too long and don't need power management at all. KeepUnusedXServer=false # The name of the Bumbleblee server group name (GID name) ServerGroup=bumblebee # Card power state at exit. Set to false if the card shoud be ON when Bumblebee # server exits. TurnCardOffAtExit=false # The default behavior of '-f' option on optirun. If set to "true", '-f' will # be ignored. NoEcoModeOverride=false # The Driver used by Bumblebee server. If this value is not set (or empty), # auto-detection is performed. The available drivers are nvidia and nouveau # (See also the driver-specific sections below) Driver=nvidia # Directory with a dummy config file to pass as a -configdir to secondary X XorgConfDir=/etc/bumblebee/xorg.conf.d ## Client options. Will take effect on the next optirun executed. [optirun] # Acceleration/ rendering bridge, possible values are auto, virtualgl and # primus. Bridge=auto # The method used for VirtualGL to transport frames between X servers. # Possible values are proxy, jpeg, rgb, xv and yuv. VGLTransport=proxy # List of paths which are searched for the primus libGL.so.1 when using # the primus bridge PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus # Should the program run under optirun even if Bumblebee server or nvidia card # is not available? AllowFallbackToIGC=false # Driver-specific settings are grouped under [driver-NAME]. The sections are # parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto- # detection resolves to NAME). # PMMethod: method to use for saving power by disabling the nvidia card, valid # values are: auto - automatically detect which PM method to use # bbswitch - new in BB 3, recommended if available # switcheroo - vga_switcheroo method, use at your own risk # none - disable PM completely # https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods ## Section with nvidia driver specific options, only parsed if Driver=nvidia [driver-nvidia] # Module name to load, defaults to Driver if empty or unset KernelDriver=nvidia PMMethod=auto # colon-separated path to the nvidia libraries LibraryPath=/usr/lib/nvidia-current:/usr/lib32/nvidia-current # comma-separated path of the directory containing nvidia_drv.so and the # default Xorg modules path XorgModulePath=/usr/lib/nvidia-current/xorg,/usr/lib/xorg/modules XorgConfFile=/etc/bumblebee/xorg.conf.nvidia ## Section with nouveau driver specific options, only parsed if Driver=nouveau [driver-nouveau] KernelDriver=nouveau PMMethod=auto XorgConfFile=/etc/bumblebee/xorg.conf.nouveau DRIVER VERSION - Output of jockey-text -l: nvidia_304_updates - nvidia_304_updates (Proprietary, Enabled, Not in use)

    Read the article

  • How to setup HDMI output on m11x with Nvidia GeForce GT 540M? (Bumblebee) Help?

    - by Alexander Tritan
    I have an Alienware m11x with Optimus Technology. I setup (Fresh Install) Ubuntu 12.04 with bumblebee as below. Please help me set up the HDMI output so that I can connect it to my monitor. $ uname -a Linux ubuntu 3.2.0-24-generic-pae #39-Ubuntu SMP Mon May 21 18:54:21 UTC 2012 i686 i686 i386 GNU/Linux $ lspci | grep -i vga 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 540M] (rev a1) $ dpkg --get-selections bumblebee install bumblebee-nvidia install $ bumblebeed -version bumblebeed --version bumblebeed (Bumblebee) 3.0 Copyright (C) 2011 The Bumblebee Project Should xrandr normally show HDMI? $ xrandr -q Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192 LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 256mm x 144mm 1366x768 60.0*+ 1360x768 59.8 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) $ cat /etc/X11/xorg.conf Section "ServerLayout" Identifier "Layout0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" Option "NoLogo" "true" Option "ConnectedMonitor" "DFP" EndSection $ cat /etc/bumblebee/xorg.conf.nvidia Section "ServerLayout" Identifier "Layout0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" Option "NoLogo" "true" Option "ConnectedMonitor" "DFP" EndSection $ cat /etc/bumblebee/xorg.conf.nouveau Section "ServerLayout" Identifier "Layout0" Screen "Screen0" Option "AutoAddDevices" "true" EndSection Section "Device" Identifier "Device0" Driver "nouveau" EndSection Section "Screen" Identifier "Screen0" Device "Device0" EndSection and finally the biggest config file below: $cat /etc/bumblebee/bumblebee.conf [bumblebeed] VirtualDisplay=:8 KeepUnusedXServer=true ServerGroup=bumblebee TurnCardOffAtExit=false NoEcoModeOverride=false Driver= [optirun] VGLTransport=proxy AllowFallbackToIGC=false PMMethod=none [driver-nvidia] KernelDriver=nvidia-current Module=nvidia PMMethod=none LibraryPath=/usr/lib/nvidia-current:/usr/lib32/nvidia-current XorgModulePath=/usr/lib/nvidia-current/xorg,/usr/lib/xorg/modules XorgConfFile=/etc/bumblebee/xorg.conf.nvidia [driver-nouveau] KernelDriver=nouveau PMMethod=none XorgConfFile=/etc/bumblebee/xorg.conf.nouveau Any ideas on setting up the Optimus to output to the HDMI T.V.? I want to enable my HDMI with my GeForce GT 540M.

    Read the article

  • unable to load nvidia(bumblebee) in ubuntu 14.04 (only nouveau loads)

    - by Ubuntuser
    Bumblebee stopped working on my system after upgrading to stable version of Ubuntu 14.04. DUring installation I get this error rmmod: ERROR: Module nouveau is in use Setting up bumblebee (3.2.1-90~trustyppa1) ... Selecting 01:00:0 as discrete nvidia card. If this is incorrect, edit the BusID line in /etc/bumblebee/xorg.conf.nouveau . bumblebeed start/running, process 11133 Processing triggers for initramfs-tools (0.103ubuntu4.1) ... update-initramfs: Generating /boot/initrd.img-3.14.1-031401-generic Setting up bumblebee-nvidia (3.2.1-90~trustyppa1) ... Selecting 01:00:0 as discrete nvidia card. If this is incorrect, edit the BusID line in /etc/bumblebee/xorg.conf.nvidia rmmod: ERROR: Module nouveau is in use bumblebeed start/running, process 18284 It says nouveau is in use. I checked the loaded modules lsmod | grep nouveau nouveau 1097199 1 mxm_wmi 13021 1 nouveau ttm 85115 1 nouveau i2c_algo_bit 13413 2 i915,nouveau drm_kms_helper 52758 2 i915,nouveau drm 302817 7 ttm,i915,drm_kms_helper,nouveau wmi 19177 3 dell_wmi,mxm_wmi,nouveau video 19476 2 i915,nouveau However, I have nouveau in my blacklist cat /etc/modprobe.d/blacklist.conf | grep nouveau blacklist nouveau blacklist lbm-nouveau alias nouveau off alias lbm-nouveau off My grub is also set to nomodeset cat /etc/default/grub | grep nomodeset GRUB_CMDLINE_LINUX_DEFAULT="nomodeset quiet splash" My graphics card is nvidia optimus lspci | grep -i vga 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18) 01:00.0 VGA compatible controller: NVIDIA Corporation GT218M [GeForce 310M] (rev ff) I've raised a bug in launchpad: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1327598 Note: Nvidia-prime is working for me (partially). Frequent mouse locks. Interestingly, bumblebee works perfectly fine on my fedora 20 partition on this same laptop.

    Read the article

  • Screen Resolution stuck at 640x480 after installing Bumblebee

    - by Saurabh Agarwal
    I have a Dell XPS 15z laptop. As you can see here, there are some issues with NVidia drivers. The site recommends installation of Bumblebee (instructions given in the link). I am posting it again for ease: $ sudo add-apt-repository ppa:bumblebee/stable $ sudo apt-get update && sudo apt-get upgrade $ sudo apt-get install bumblebee bumblebee-nvidia $ sudo usermod -a -G bumblebee $USER After restarting the computer however, the screen resolution was stuck at 640x480 and I got the following error message as soon as I logged in: **Could not apply the stored configuration for monitors** none of the selected modes were compatible with the possible modes: Trying modes for CRTC 63 CRTC 63: trying mode 640x480@60Hz with output at 1366x768@60Hz (pass 0) CRTC 63: trying mode 640x480@60Hz with output at 1366x768@60Hz (pass 1) Trying modes for CRTC 64 CRTC 64: trying mode 640x480@60Hz with output at 1366x768@60Hz (pass 0) CRTC 64: trying mode 640x480@60Hz with output at 1366x768@60Hz (pass 1) Prior to the update, the display was absolutely normal and thus there is no doubt about the cause. Albeit, there was no support for graphic drivers. In case it helps, some features of graphics drivers seem to be functional after bumblebee, ie, all features are in order except for the resolution. And if the resolution can't be fixed, please suggest a way to retract the changes so that atleast the prior state may be reachieved. Any help in the matter would be highly appreciated.

    Read the article

  • Ubuntu and bumblebee and intel problem

    - by LnxSlck
    I have a brain teaser that i can't solve. When 12.04 (64bits) came out, i did a fresh install and then installed bumblebee with: sudo add-apt-repository ppa:bumblebee/stable sudo apt-get install bumblebee bumblebee-nvidia And Ubuntu recognized (System Settings - Details) Intel Card for primary card, and i could launch applications with optirun. I have: 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF119 [GeForce GT 520MX] (rev ff) Now, a few days back, i did the exact same thing, installed from the same DVD everything the same, installed bumblebee the same way. Nvidia with Optirun works fine, but Ubuntu doesn't have 3D effects: root@deathstar:~# optirun /usr/lib/nux/unity_support_test -p OpenGL vendor string: NVIDIA Corporation OpenGL renderer string: GeForce GT 520MX/PCIe/SSE2 OpenGL version string: 4.2.0 NVIDIA 295.40 Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: no GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no I never did anything to install Intel drivers (except installing mesa-utils), before bumblebee got everything working, but now i can't get Ubuntu to get Unity with 3D. Can someone help me please get Unity 3d working? Your help will be much appreciated

    Read the article

  • Ubuntu 12.04.2 won't boot after bumblebee instalation

    - by Andrej
    First of all sorry for my English, it's not my first language. Here is what I have done: I had a working ubuntu 12.04 with all updates and working bumblebee, so I could do optirun command and battery life was better than without bumblebee. Than I decided to reinstall both my systems installed windows 7 and ubuntu. Reinstalled Windows 7 all working as expected, than on other partition installed ubuntu 12.04. All worked perfectly. Than I installed bumblebee according to the procedure written here https://wiki.ubuntu.com/Bumblebee same steps that I used before. But now after I install drivers and do all written in procedure and I reboot my notebook system won't boot, it is simply stuck at black screen after short showing of start screen. I reinstalled ubuntu many times already and tried everthing, but when I try install nvidia drivers it won't boot after shutting down notebook and only thing I can do is reinstalling system. I have Lenovo Thinkpad Edge E530 and processor: Intel® Core™ i5-3210M CPU and graphic cards are Intel HD 4000 and Nvidia geforce gt630m After clean install without bumblebee, terminal command lspci| grep VGA is showing: 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 0de9 (rev a1) Can you suggest a sollution?? Or at least some links to similar topics??

    Read the article

  • Nvidia 740M still not working after Bumblebee installation

    - by Jon
    first of all, I have checked a lot of similar topics, but I still can't get my laptop to use Nvidia 740M. So first things first. I have a laptop Asus X550V(i5-3230, 4gb RAM, Nvidia 740M + Intel HD4000). I installed Ubuntu 13.10 alongside Win8(preinstalled) and both systems are running without problems. However, I have problem with second graphic card(Nvidia 740M), as Ubuntu doesn't recognize it. I installed bumblebee with this tutorial https://wiki.ubuntu.com/Bumblebee#Installation, but I still get error "Cannot access secondary GPU" error when trying to run ''optirun Steam'' in terminal. Then I tried to do this: [ERROR]Cannot access secondary GPU - error: [XORG] (EE) No devices detected. you need to edit the /etc/bumblebee/xorg.conf.nvidia (or /etc/bumblebee/xorg.conf.nouveau if using the noveau driver) and specify the correct BusID by following the instructions therein. But with lspci / VGA i get only info about Intel 4000, but no Nvidia. When I type only lspci, I get the line for Nvidia 740M,but after I edit the config file I still get second card error. Also, in /etc/bumblebee/xorg.conf.nvidia there wasn't BusID or anything similar, so I just added the whole line in device section. As I sad, I tried a lot of things to get it working, avoiding this forum(as I din't want to bother people with some solutions possible), but alas!, I had to bother you. If there is a need for some additional info, just say, no problem at all. Thank you very much in advance. :)

    Read the article

  • Bumblebee stopped working after the today's update

    - by renatov
    I've followed this guide to put Bumblebee to work. Everything was working perfect and I was happy playing my Steam games using primusrun to run them. But after today's update, which updated something related to NVIDIA, Bumblebee is not working anymore: $ primusrun glxgears 2014/06/01 02:36:36 socat[4154] E connect(3, AF=1 "/var/run/bumblebee.socket", 27): No such file or directory primus: fatal: failed to connect to Bumblebee daemon: No such file or directory I'm using Ubuntu 14.04, I have an optimus notebook with a dedicated Nvidia GeForce 730M and an integrated Intel card. Could someone help me, please?

    Read the article

  • Problems after bumblebee installation

    - by Samuel
    I tried to install bumblebee on Ubuntu 12.04 LTS by following steps on ubuntuwiki site. But when i used this code: sudo add-apt-repository ppa:bumblebee/stable && sudo apt-get update this output came out: Executing: gpg --ignore-time-conflict --no-options --no-default-keyring --secret-keyring /tmp/tmp.q0zzLiXVT3 --trustdb-name /etc/apt/trustdb.gpg --keyring /etc/apt/trusted.gpg --primary-keyring /etc/apt/trusted.gpg --keyserver hkp://keyserver.ubuntu.com:80/ --recv 46C0364A882F14F899448FFCB22A95F88110A93A gpg: requesting key 8110A93A from hkp server keyserver.ubuntu.com gpg: key 8110A93A: "Launchpad PPA for Bumlebee Project" not changed gpg: Total number processed: 1 gpg: unchanged: 1 E: Type 'ain' is not known on line 3 in source list /etc/apt/sources.list.d/bumblebee-stable-precise.list E: The list of sources could not be read. There´s also the same problem message when I try to run the update center. ´E:Type´ain´ is not known on line 3 in source list /etc/apt/sources.list.d/bumblebee-stable-precise.list, E:The list of sources could not be read., E:The package lists or status file could not be parsed or opened.´ I don´t know what to do since I´m a newbie at Linux. Thanks in advance, Samuel.

    Read the article

  • How to solve Bumblebee/Nvidia Optimus issues with kernel 3.4 (works perfectly under 3.2)

    - by theJimy
    I installed Ubuntu and could setup to utilize my Intel HD 3000/Geforce GT 540M hybrid graphics perfectly with the method described here: How well do laptops with Nvidia Optimus work? Everything works fine under Kernel 3.2. Now I wanted to upgrade though to Kernel 3.4, as it brings many improvements, especially in saving battery life (ie. Intel RC6)... at least from what I heard. While I had no issues installing the 3.4 Kernel under Ubuntu 12.04 and everything so far runs fine, Bumblebee causes issues under kernel 3.4. When trying to run commands like optirun, lsmod (or similar kernel tools) these just lock up and never return. The Bumblebee developers seem to refuse to help with mainline kernels (as seen here: https://github.com/Bumblebee-Project/bbswitch/issues/17 ). Does anyone know, how to solve this issue? Could I solve this probably, by compiling the kernel and/or Bumblebee against the kernels sources myself and having a Ubuntu-like kernel? Any other idea that might help me to solve this myself, so I could profit from the 3.4 features and Optimus, would be very appreciated.

    Read the article

  • stuck with 640x480 resolution using bumblebee on 10.04

    - by pholz
    I just installed bumblebee on a Dell XPS L502X. It basically works: optirun glxspheres does exactly what it should. However, X is running with a resolution of 640x480. I can try to change settings with optirun nvidia-settings -c :8 (as suggested on the bumblebee wiki), but in the relevant section it only lists resolutions up to 640x480. In the /etc/bumblebee/xorg.conf.* files, there are no Monitor or Screen sections. Adding them doesn't change anything. How can I change the resolution?

    Read the article

  • Ubuntu 12.04.3 Graphics Issues: Broken Pipes, Reinstalled Xorg and Bumblebee

    - by user190488
    It seems I have a problem, and am only making it worse by following what I find online. I have a new Asus N550JV-D71 (not sure about the part after the dash, though I definitely know it includes 71). I decided to downgrade Windows 8 to 7, then dual boot Ubuntu 12.04 with it (there were issues with Windows 8, and I had a Windows 7 disk handy). It did work and, after installing Bumblebee in tty (because it wouldn't boot when it was first installed), it worked marvelously for a little less than a week. However, I restarted it last night and got the Could not write bytes: Broken pipes error. (I see it's a very common error, but I've looked at the majority of the suggested Similar Questions already.) I followed what I could find online, followed those instructions (making sure to not install any sort of graphics drivers other than what Bumblebee provides), and it just seems to go further and further downhill. I'm afraid I didn't write the exact steps to get to this point (it was late by the time I gave up the night before), but it involved reinstalling lightdm, xorg (and xserver?), and Bumblebee. I then changed the Bumblebee.conf file so that Device=nvidia. I'm pretty new to Linux in general (I've used it since 10.04, but I hadn't had issues up until this computer, so it let me stay a newbie), so I'm not exactly sure what log files to look at to find the errors to look up. However, I did look at lshw and noticed that displays was marked as unassigned. Also, if I try to start lightdm using the command line, it always stops at Stopping Mount network filesystems. I should note that there isn't an xorg.conf file, and no .Xauthority. I would really, really prefer not to reinstall 12.04 if possible. I managed to get grub to display only a short time ago, and I can't boot to the dvd drive unless I go into the BIOS settings and manually change the boot order (that was an issue from the beginning, before the Ubuntu install), and getting into those settings often means rebooting several times due to the fact that the window to get to it is extremely small. I have most of what I need backed up, however, in case it does get to that point. If I really have to, I can just use the latest Ubuntu version instead of the LTS, but the reason I chose 12.04 in the first place is because I need something stable-ish, and Windows isn't suitable to what I need to do. I should note that the reason I restarted last night in the first place was that it wasn't charging the battery, and the wifi kept on going out. Hardware: Nvidia GeForce GT 750M Intel HD graphics 4600

    Read the article

  • How to make Unity 3D work with Bumblebee using the Intel chipset

    - by EboMike
    I have a Sony VAIO S laptop with the dreaded Optimus and finally managed to get Bumblebee to work fully on Ubuntu 12.04 so that I can utilize both the hardware acceleration of the Intel chipset as well as the Nvidia one via optirun and/or bumble-app-settings. However, the desktop effects don't work. But they should, I vaguely remember that they worked for a while before I had Bumblebee installed. This is what I get with the support test: :~$ /usr/lib/nux/unity_support_test -p Xlib: extension "NV-GLX" missing on display ":0". OpenGL vendor string: Tungsten Graphics, Inc OpenGL renderer string: Mesa DRI Intel(R) Ivybridge Mobile OpenGL version string: 1.4 (2.1 Mesa 8.0.2) Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: no GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no First of all, I kind of doubt that the chipset doesn't support VBOs (essentially a standard feature in GL). Neither Xorg.0.log nor Xorg.8.log show any particular errors. As for the Nvidia drivers: In order to get them to work, I had to install the 304.22 drivers (older ones wouldn't work). They clobbered libglx.so, so I reinstated the xserver-xorg-core libglx.so in its original place, moved Nvidia's libglx.so to an nvidia-specific folder and specified that folder in the bumblebee.config. That seems to work and shouldn't cause the problem I see here. For fun, I tried to use the Nvidia chipset for Unity, but that didn't fly either: ~$ optirun /usr/lib/nux/unity_support_test -p OpenGL vendor string: NVIDIA Corporation OpenGL renderer string: GeForce GT 640M LE/PCIe/SSE2 OpenGL version string: 4.2.0 NVIDIA 304.22 Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: no GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no

    Read the article

  • Bumblebee - Poor performance with games

    - by user106880
    I have an Alienware M14x (GeForce 650m with Optimus) and got Bumblebee working correctly (trying to get ready for steam for linux :)). Also I'm running Ubuntu 12.10 with Unity. I get great framerates with glxgears and sauerbraten (a game on the repositories), but when I run games like Bastion and Splice, I get pretty terrible framerate, in fact worse than my integrated intel gpu. I have nvidia-current installed under ubuntu-x-swat/x-updates so it's driver version 310.xx. Also I forgot to add that I haven't been able to test other drivers because they seem to break glx (x can't load the glx module). I've been troubleshooting this for days now, and I'm very nearly out of ideas. Any hints on why only some games are running so poorly with bumblebee?

    Read the article

  • How do I determine whether bumblebee is working as expected?

    - by Christian Fazzini
    I followed the instructions at https://wiki.ubuntu.com/Bumblebee sudo add-apt-repository ppa:bumblebee/stable sudo add-apt-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update Instead of installing the proprietary nvidia drivers, via: sudo apt-get install bumblebee bumblebee-nvidia linux-headers-generic I did: sudo apt-get install --no-install-recommends bumblebee linux-headers-generic How do I determine that power savings mode is active and that my dedicated GPU isn't running? One thing that bugs me is that if I go to System Settings - Details - Graphics. Driver is shown as Unknown.

    Read the article

  • Bumblebee optirun appears to depend on Intel

    - by user206398
    I have a Lenovo T420 with Intel and Nvidia graphics. On upgrade to Ubuntu Saucy, I had to purge and reinstall bumblebee-nvidia to get beyond optirun failing to find a GPU driver. Now, "optirun glxgears" and "optirun sol" succeed, but optirun fails on 2 Virtual Life viewers that it supported in the past, Cool VL (CoolVLViewer-1.26.8.34-Linux-x86) and Imprudence (Imprudence 1.4.0 beta2). In both cases, the error output is huge, but it starts with libGL error: failed to load driver: i965 and libGL error: failed to load driver: swrast From the little I can discover, i965 is an Intel graphics driver, which should not be invoked at all. I haven't found any information about swrast. I suspect that some of the X configuration associated with Bumblebee has some Intel dependence that is invoked on certain library calls, but not others. I haven't discovered any definite information on this line. The Cool VL Viewer runs without optirun, but complains about the insufficiency of the Intel graphics.

    Read the article

  • ERROR running Bumblebee on 13.10

    - by paul
    I'm trying to get Bumblebee working again after an upgrade to Saucy. Running software with Optirun gives the following output: optirun nvidia-settings [ 45.697126] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Failed to load /usr/lib/xorg/modules/libglamoregl.so: /usr/lib/xorg/modules/libglamoregl.so: undefined symbol: _glapi_tls_Context [ 45.697179] [ERROR]Aborting because fallback start is disabled. Does anyone know how to fix this? Thanks! :)

    Read the article

  • Ubuntu 14.04 Nvidia Optimus Bumblebee error

    - by Cristian
    I know that in Ubuntu 14.04 there exists nvidia-prime for Nvidia Optimus, but I don't like it and neither am I able to get it work. After upgrading from Ubuntu 12.04 everything crashed, and I made a clean install of Ubuntu 14.04 and Bumblebee, but now I have new troubles. After running optirun glxgears I get the following error: **[ 4703.996785] [ERROR]Cannot access secondary GPU, secondary X is not active.** **[ 4703.996910] [ERROR]Aborting because fallback start is disabled.** Please help.

    Read the article

  • How to make Bumblebee work with HP Pavilion DV6T-7000 Quad Edition with Intel HD 4000 and Nvidia GeForce GT 650M 2GB?

    - by user69469
    I just recently bought a HP DV6T-7000 Quad Edition. It has an Intel HD 4000 and a Nvidia GeForce GT 650M 2GB with Optimus. I read that I could use bumblebee to make optimus work, so I installed it. I also installed bumblebee-nvidia and nvidia-current from the ubuntu-x-swat/x-updates ppa. I rebooted, but when I tried to run anything with optirun, the computer would wait ten seconds or so, then do a hard shutdown. I got no log messages from bumblebee, Xorg, or optirun, either. I have purged and reinstalled bumblebee, bumblebee-nvidia, and nvidia-current. I have also set the turned off power management in the bumblebee.conf file to no avail. I am out of ideas about this, and I need both options. Any ideas would be much appreciated.

    Read the article

  • Bumblebee : Module bbswitch could not be loaded

    - by StepTNT
    I've upgraded to 12.04 and I had to switch from Ironhide to the latest version of Bumblebee. Now, when I try to run bumblebeed, I get this error: FATAL: Module bbswitch not found. [ERROR]Module bbswitch could not be loaded (timeout?) [WARN]No switching method available. The dedicated card will always be on. I don't really need to use the secondary VGA on Kubuntu, so I would like to find a way to definitely shut the discrete GPU down and avoid wasting battery. I can't disable it from the BIOS because I use it on Windows. My card is an nvidia 540M.

    Read the article

  • Kernel freezes with nvidia optimus and bumblebee on 12.04

    - by piovisqui
    I have a Sony VAIO with Intel i7-3520M and NVIDIA Corporation GK107M [GeForce GT 640M LE]. I installed bumblebee and nvidia drivers. They work almost fine, but the system freezes like in a kernel panic once every day. I can play Dota 2 with primusrun on it with 20-30fps 1080p. But when I do something simple as expanding the KDE calendar widget from the bottom right corner, the system hangs a lot and windows borders get another border. The system freezes in not very intensive graphic tasks, for instance, ALT+TAB with KWin effects or pressing ALT+F2 for poping up the launcher. How can I solve this? Info: I use KDE. Couldn't paste de logs here, check at pastebin: http://pastebin.com/SBet8fRQ

    Read the article

  • Optimus Bumblebee Performance

    - by Chance
    After installing Ubuntu 12.04 and Bumblebee, I tested out the performance of the Nvidia card using Minecraft and a few other games. I've noticed it to be way slower than it was on Windows 7. Is this normal? I'm using the GT 630m. From what I've read online, nobody has said it to be slower than Windows. I'm just really curious because I want to use Linux so much more than Windows, but if I don't get the same performance I feel really picky. The Nvidia card is still faster than my Intel graphics on Ubuntu, but it's not as fast as it was for my on Windows. I get 60 - 80 fps on Minecraft on windows, while I get 28 - 48 fps on Ubuntu. Any Ideas why? Thanks so much!

    Read the article

  • Error message when running OpenGL programs with bumblebee

    - by user170860
    X Error of failed request: BadDrawable (invalid Pixmap or Window parameter) Major opcode of failed request: 152 (DRI2) Minor opcode of failed request: 8 (DRI2SwapBuffers ) Resource id in failed request: 0x4200005 Serial number of failed request: 2166 Current serial number in output stream: 2167 primus: warning: timeout waiting for display worker Segmentation fault (core dumped) I don't get this on all OGL programs, but only particularly GPU intense ones. Also, I only get this using primusrun. optirun gives the same error no matter what I run: [VGL] NOTICE: Pixel format of 2D X server does not match pixel format of [VGL] Pbuffer. Disabling PBO readback. I don't know what either of these mean. Neither of them stop the programs from running, but I'd like to fix the problem if there is one. Also, I prefer to use primusrun because it is faster and it does a better job with vertical sync, however, it only supports OGL 4.2. This isn't a big issue because the programs I write are forward compatible, but it still seems odd to me. So basically I'd just like it if someone could explain to me what is happening and if there is something I can do about it. Thanks.

    Read the article

  • bumblebee does not work with metacity and KWin, but works with compiz

    - by cpu2
    If I try to launch something with optirun under compiz, it works. If I try to launch something with optirun under KDE or metacity, it gives me: [ 247.384077] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) [ 247.384117] [ERROR]Aborting because fallback start is disabled. If it matters, I'm trying to launch Portal 2 with wine I have: Nvidia GeForce GT540M with optimus Acer Aspire Timeline X Intel core i5 and 3000 Integrated Graphics

    Read the article

1 2 3 4 5  | Next Page >