Search Results

Search found 75 results on 3 pages for 'disco'.

Page 1/3 | 1 2 3  | Next Page >

  • How to force remove a package if dpkg removal script fails?

    - by fodon
    I'm trying to remove a package where I deleted the /etc/init.d/disco-master file (in an attempt to remove the package manually). I want to remove the disco-master package. How do I do this now? This is what happens when I do sudo apt-get remove disco-master: removing disco-master ... invoke-rc.d: unknown initscript, /etc/init.d/disco-master not found. dpkg: error processing disco-master (--remove): subprocess installed pre-removal script returned error exit status 100 Errors were encountered while processing: disco-master E: Sub-process /usr/bin/dpkg returned an error code (1) When I do sudo apt-get install --reinstall disco-master I get the following: You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies: disco-master : Depends: disco-node (= 0.4.2+nmu1) but it is not going to be installed E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). When I do sudo apt-get -f install I get this: Unpacking disco-node (from .../disco-node_0.4.2+nmu1_amd64.deb) ... dpkg: error processing /var/cache/apt/archives/disco-node_0.4.2+nmu1_amd64.deb (--unpack): trying to overwrite '/usr/lib/disco/master/ebin/disco.app', which is also in package disco-master 0.4.1 No apport report written because MaxReports is reached already dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Errors were encountered while processing: /var/cache/apt/archives/disco-node_0.4.2+nmu1_amd64.deb E: Sub-process /usr/bin/dpkg returned an error code (1) When I run sudo apt-get remove disco-node I get the following: Package disco-node is not installed, so not removed You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies: disco-master : Depends: disco-node (= 0.4.1) but it is not going to be installed Depends: python-disco (= 0.4.1) but 0.4.2+nmu1 is to be installed E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). When I did sudo dpkg -P --force-all disco-master I got: Removing disco-master ... invoke-rc.d: unknown initscript, /etc/init.d/disco-master not found. dpkg: error processing disco-master (--purge): subprocess installed pre-removal script returned error exit status 100 Errors were encountered while processing: disco-master

    Read the article

  • ayuda con disco duro

    - by henry
    al momento de instalar el ubuntu me equivoque seleccionar el disco (en este caso quise instalar en el disco e:/) pero casi finalizar la instalacion ve dio error (cd defectuoso, grabe el cd en menos velocidad intente desde usb o error en el disco) inicie con windows xp y el disco D:/ no se muestra ci con el visor de ubuntu (probar desde cd) y no se ve mis archivos se formateo todo el disco. quiero recuperar mis datos. mi pc no da boot desde usb. gracias de antmano

    Read the article

  • Disco/MapReduce: Using results of previous iteration as input to new iteration

    - by muckabout
    Currently am implementing PageRank on Disco. As an iterative algorithm, the results of one iteration are used as input to the next iteration. I have a large file which represents all the links, with each row representing a page and the values in the row representing the pages to which it links. For Disco, I break this file into N chunks, then run MapReduce for one round. As a result, I get a set of (page, rank) tuples. I'd like to feed this rank to the next iteration. However, now my mapper needs two inputs: the graph file, and the pageranks. I would like to "zip" together the graph file and the page ranks, such that each line represents a page, it's rank, and it's out links. Since this graph file is separated into N chunks, I need to split the pagerank vector into N parallel chunks, and zip the regions of the pagerank vectors to the graph chunks This all seems more complicated than necessary, and as a pretty straightforward operation (with the quintessential mapreduce algorithm), it seems I'm missing something about Disco that could really simplify the approach. Any thoughts?

    Read the article

  • ¿Cómo utilizar 2º disco duro de Ubuntu?

    - by Lightday
    Recientemente he instalado Windows y Ubuntu 12.04. Tengo 2 discos duros ( 160 GB y 320 GB). Datos de la instalación: Partición Sistema de archivos Etiqueta Tamaño Punto de montaja /dev/sda1 ntfs Sistema Windows 21 GB ^/dev/sda2 extendida 128,54 GB /dev/sda5 Linux-swap Linux-swap 4,39 GB intercambio /dev/sda6 ext4 Sistema Linux 14,65 GB / /dev/sda7 ext4 Datos Linux 109,49 GB /home /dev/sdb1 ext4 Datos Linux 298.09 /opt Si pincho en la carpeta /home, me dice que hay 106 GB libres y es donde está la carpeta personal y puedo usar ese espacio del disco. Si pincho en la carpeta de /opt, no hay carpeta personal, ¿y como uso ese espacio del disco? Gracias.

    Read the article

  • permiso se usuario para lectura de disco duro

    - by Dayron Chavez Sandoval
    tengo una pc asus con ubuntu 14.04.01lts y en el existen 3 cuentas.1 administrador y 2 estandar.el administrador puede leer y modificar los archivos dentro el disco duro.sin embargo los estandar ni siquiera pueden leerlo,dice que necesita permisos para entrar,intentamos cambiarlos desde cuenta administrador pero al marcar la opcion lectura y modificar esta se vuelve a poner automaticamente en no.recuerdo que ubuntu esta instalado junto a windows 8.1 pero estamos pronto a quitarlo por ser muy inestable.

    Read the article

  • Reading Data from DDFS ValueError: No JSON object could be decoded

    - by secumind
    I'm running dozens of map reduce jobs for a number of different purposes using disco. My data has grown enormous and I thought I would try using DDFS for a change rather than standard txt files. I've followed the DISCO map/reduce example Counting Words as a map/reduce job, without to much difficulty and with the help of others, Reading JSON specific data into DISCO I've gotten past one of my latest problems. I'm trying to read data in/out of ddfs to better chunk and distribute it but am having a bit of trouble. Here's an example file: file.txt {"favorited": false, "in_reply_to_user_id": null, "contributors": null, "truncated": false, "text": "I'll call him back tomorrow I guess", "created_at": "Mon Feb 13 05:34:27 +0000 2012", "retweeted": false, "in_reply_to_status_id_str": null, "coordinates": null, "in_reply_to_user_id_str": null, "entities": {"user_mentions": [], "hashtags": [], "urls": []}, "in_reply_to_status_id": null, "id_str": "168931016843603968", "place": null, "user": {"follow_request_sent": null, "profile_use_background_image": true, "profile_background_image_url_https": "https://si0.twimg.com/profile_background_images/305726905/FASHION-3.png", "verified": false, "profile_image_url_https": "https://si0.twimg.com/profile_images/1818996723/image_normal.jpg", "profile_sidebar_fill_color": "292727", "is_translator": false, "id": 113532729, "profile_text_color": "000000", "followers_count": 78, "protected": false, "location": "With My Niggas In Paris!", "default_profile_image": false, "listed_count": 0, "utc_offset": -21600, "statuses_count": 6733, "description": "Made in CHINA., Educated && Making My Own $$. Fear GOD && Put Him 1st. #TeamFollowBack #TeamiPhone\n", "friends_count": 74, "profile_link_color": "b03f3f", "profile_image_url": "http://a2.twimg.com/profile_images/1818996723/image_normal.jpg", "notifications": null, "show_all_inline_media": false, "geo_enabled": true, "profile_background_color": "1f9199", "id_str": "113532729", "profile_background_image_url": "http://a3.twimg.com/profile_background_images/305726905/FASHION-3.png", "name": "Bee'Jay", "lang": "en", "profile_background_tile": true, "favourites_count": 19, "screen_name": "OohMyBEEsNice", "url": "http://www.bitchimpaid.org", "created_at": "Fri Feb 12 03:32:54 +0000 2010", "contributors_enabled": false, "time_zone": "Central Time (US & Canada)", "profile_sidebar_border_color": "000000", "default_profile": false, "following": null}, "in_reply_to_screen_name": null, "retweet_count": 0, "geo": null, "id": 168931016843603968, "source": "<a href=\"http://twitter.com/#!/download/iphone\" rel=\"nofollow\">Twitter for iPhone</a>"} {"favorited": false, "in_reply_to_user_id": 50940453, "contributors": null, "truncated": false, "text": "@LegaMrvica @MimozaBand makasi om artis :D kadoo kadoo", "created_at": "Mon Feb 13 05:34:27 +0000 2012", "retweeted": false, "in_reply_to_status_id_str": "168653037894770688", "coordinates": null, "in_reply_to_user_id_str": "50940453", "entities": {"user_mentions": [{"indices": [0, 11], "screen_name": "LegaMrvica", "id": 50940453, "name": "Lega_thePianis", "id_str": "50940453"}, {"indices": [12, 23], "screen_name": "MimozaBand", "id": 375128905, "name": "Mimoza", "id_str": "375128905"}], "hashtags": [], "urls": []}, "in_reply_to_status_id": 168653037894770688, "id_str": "168931016868761600", "place": null, "user": {"follow_request_sent": null, "profile_use_background_image": true, "profile_background_image_url_https": "https://si0.twimg.com/profile_background_images/347686061/Galungan_dan_Kuningan.jpg", "verified": false, "profile_image_url_https": "https://si0.twimg.com/profile_images/1803845596/Picture_20124_normal.jpg", "profile_sidebar_fill_color": "DDFFCC", "is_translator": false, "id": 48293450, "profile_text_color": "333333", "followers_count": 182, "protected": false, "location": "\u00dcT: -6.906799,107.622383", "default_profile_image": false, "listed_count": 0, "utc_offset": -28800, "statuses_count": 3052, "description": "Fashion design maranatha '11 // traditional dancer (bali) at sanggar tampak siring & Natya Nataraja", "friends_count": 206, "profile_link_color": "0084B4", "profile_image_url": "http://a3.twimg.com/profile_images/1803845596/Picture_20124_normal.jpg", "notifications": null, "show_all_inline_media": false, "geo_enabled": true, "profile_background_color": "9AE4E8", "id_str": "48293450", "profile_background_image_url": "http://a0.twimg.com/profile_background_images/347686061/Galungan_dan_Kuningan.jpg", "name": "nana afiff", "lang": "en", "profile_background_tile": true, "favourites_count": 2, "screen_name": "hasnfebria", "url": null, "created_at": "Thu Jun 18 08:50:29 +0000 2009", "contributors_enabled": false, "time_zone": "Pacific Time (US & Canada)", "profile_sidebar_border_color": "BDDCAD", "default_profile": false, "following": null}, "in_reply_to_screen_name": "LegaMrvica", "retweet_count": 0, "geo": null, "id": 168931016868761600, "source": "<a href=\"http://blackberry.com/twitter\" rel=\"nofollow\">Twitter for BlackBerry\u00ae</a>"} {"favorited": false, "in_reply_to_user_id": 27260086, "contributors": null, "truncated": false, "text": "@justinbieber u were born to be somebody, and u're super important in beliebers' life. thanks for all biebs. I love u. follow me? 84", "created_at": "Mon Feb 13 05:34:27 +0000 2012", "retweeted": false, "in_reply_to_status_id_str": null, "coordinates": null, "in_reply_to_user_id_str": "27260086", "entities": {"user_mentions": [{"indices": [0, 13], "screen_name": "justinbieber", "id": 27260086, "name": "Justin Bieber", "id_str": "27260086"}], "hashtags": [], "urls": []}, "in_reply_to_status_id": null, "id_str": "168931016856178688", "place": null, "user": {"follow_request_sent": null, "profile_use_background_image": true, "profile_background_image_url_https": "https://si0.twimg.com/profile_background_images/416005864/Captura.JPG", "verified": false, "profile_image_url_https": "https://si0.twimg.com/profile_images/1808883280/Captura6_normal.JPG", "profile_sidebar_fill_color": "f5e7f3", "is_translator": false, "id": 406750700, "profile_text_color": "333333", "followers_count": 1122, "protected": false, "location": "Adentro de una supra.", "default_profile_image": false, "listed_count": 0, "utc_offset": -14400, "statuses_count": 20966, "description": "Mi \u00eddolo es @justinbieber , si te gusta \u00a1genial!, si no, solo respetalo. El cambi\u00f3 mi vida completamente y mi sue\u00f1o es conocerlo #TrueBelieber . ", "friends_count": 1015, "profile_link_color": "9404b8", "profile_image_url": "http://a1.twimg.com/profile_images/1808883280/Captura6_normal.JPG", "notifications": null, "show_all_inline_media": false, "geo_enabled": false, "profile_background_color": "f9fcfa", "id_str": "406750700", "profile_background_image_url": "http://a3.twimg.com/profile_background_images/416005864/Captura.JPG", "name": "neversaynever,right?", "lang": "es", "profile_background_tile": false, "favourites_count": 22, "screen_name": "True_Belieebers", "url": "http://www.wehavebieber-fever.tumblr.com", "created_at": "Mon Nov 07 04:17:40 +0000 2011", "contributors_enabled": false, "time_zone": "Santiago", "profile_sidebar_border_color": "C0DEED", "default_profile": false, "following": null}, "in_reply_to_screen_name": "justinbieber", "retweet_count": 0, "geo": null, "id": 168931016856178688, "source": "<a href=\"http://yfrog.com\" rel=\"nofollow\">Yfrog</a>"} I load it into DDFS with: # ddfs chunk data:test1 ./file.txt created: disco://localhost/ddfs/vol0/blob/44/file_txt-0$549-db27b-125e1 I test that the file is indeed loaded into ddfs with: # ddfs xcat data:test1 {"favorited": false, "in_reply_to_user_id": null, "contributors": null, "truncated": false, "text": "I'll call him back tomorrow I guess", "created_at": "Mon Feb 13 05:34:27 +0000 2012", "retweeted": false, "in_reply_to_status_id_str": null, "coordinates": null, "in_reply_to_user_id_str": null, "entities": {"user_mentions": [], "hashtags": [], "urls": []}, "in_reply_to_status_id": null, "id_str": "168931016843603968", "place": null, "user": {"follow_request_sent": null, "profile_use_background_image": true, "profile_background_image_url_https": "https://si0.twimg.com/profile_background_images/305726905/FASHION-3.png", "verified": false, "profile_image_url_https": "https://si0.twimg.com/profile_images/1818996723/image_normal.jpg", "profile_sidebar_fill_color": "292727", "is_translator": false, "id": 113532729, "profile_text_color": "000000", "followers_count": 78, "protected": false, "location": "With My Niggas In Paris!", "default_profile_image": false, "listed_count": 0, "utc_offset": -21600, "statuses_count": 6733, "description": "Made in CHINA., Educated && Making My Own $$. Fear GOD && Put Him 1st. #TeamFollowBack #TeamiPhone\n", "friends_count": 74, "profile_link_color": "b03f3f", "profile_image_url": "http://a2.twimg.com/profile_images/1818996723/image_normal.jpg", "notifications": null, "show_all_inline_media": false, "geo_enabled": true, "profile_background_color": "1f9199", "id_str": "113532729", "profile_background_image_url": "http://a3.twimg.com/profile_background_images/305726905/FASHION-3.png", "name": "Bee'Jay", "lang": "en", "profile_background_tile": true, "favourites_count": 19, "screen_name": "OohMyBEEsNice", "url": "http://www.bitchimpaid.org", "created_at": "Fri Feb 12 03:32:54 +0000 2010", "contributors_enabled": false, "time_zone": "Central Time (US & Canada)", "profile_sidebar_border_color": "000000", "default_profile": false, "following": null}, "in_reply_to_screen_name": null, "retweet_count": 0, "geo": null, "id": 168931016843603968, "source": "<a href=\"http://twitter.com/#!/download/iphone\" rel=\"nofollow\">Twitter for iPhone</a>"} {"favorited": false, "in_reply_to_user_id": 50940453, "contributors": null, "truncated": false, "text": "@LegaMrvica @MimozaBand makasi om artis :D kadoo kadoo", "created_at": "Mon Feb 13 05:34:27 +0000 2012", "retweeted": false, "in_reply_to_status_id_str": "168653037894770688", "coordinates": null, "in_reply_to_user_id_str": "50940453", "entities": {"user_mentions": [{"indices": [0, 11], "screen_name": "LegaMrvica", "id": 50940453, "name": "Lega_thePianis", "id_str": "50940453"}, {"indices": [12, 23], "screen_name": "MimozaBand", "id": 375128905, "name": "Mimoza", "id_str": "375128905"}], "hashtags": [], "urls": []}, "in_reply_to_status_id": 168653037894770688, "id_str": "168931016868761600", "place": null, "user": {"follow_request_sent": null, "profile_use_background_image": true, "profile_background_image_url_https": "https://si0.twimg.com/profile_background_images/347686061/Galungan_dan_Kuningan.jpg", "verified": false, "profile_image_url_https": "https://si0.twimg.com/profile_images/1803845596/Picture_20124_normal.jpg", "profile_sidebar_fill_color": "DDFFCC", "is_translator": false, "id": 48293450, "profile_text_color": "333333", "followers_count": 182, "protected": false, "location": "\u00dcT: -6.906799,107.622383", "default_profile_image": false, "listed_count": 0, "utc_offset": -28800, "statuses_count": 3052, "description": "Fashion design maranatha '11 // traditional dancer (bali) at sanggar tampak siring & Natya Nataraja", "friends_count": 206, "profile_link_color": "0084B4", "profile_image_url": "http://a3.twimg.com/profile_images/1803845596/Picture_20124_normal.jpg", "notifications": null, "show_all_inline_media": false, "geo_enabled": true, "profile_background_color": "9AE4E8", "id_str": "48293450", "profile_background_image_url": "http://a0.twimg.com/profile_background_images/347686061/Galungan_dan_Kuningan.jpg", "name": "nana afiff", "lang": "en", "profile_background_tile": true, "favourites_count": 2, "screen_name": "hasnfebria", "url": null, "created_at": "Thu Jun 18 08:50:29 +0000 2009", "contributors_enabled": false, "time_zone": "Pacific Time (US & Canada)", "profile_sidebar_border_color": "BDDCAD", "default_profile": false, "following": null}, "in_reply_to_screen_name": "LegaMrvica", "retweet_count": 0, "geo": null, "id": 168931016868761600, "source": "<a href=\"http://blackberry.com/twitter\" rel=\"nofollow\">Twitter for BlackBerry\u00ae</a>"} {"favorited": false, "in_reply_to_user_id": 27260086, "contributors": null, "truncated": false, "text": "@justinbieber u were born to be somebody, and u're super important in beliebers' life. thanks for all biebs. I love u. follow me? 84", "created_at": "Mon Feb 13 05:34:27 +0000 2012", "retweeted": false, "in_reply_to_status_id_str": null, "coordinates": null, "in_reply_to_user_id_str": "27260086", "entities": {"user_mentions": [{"indices": [0, 13], "screen_name": "justinbieber", "id": 27260086, "name": "Justin Bieber", "id_str": "27260086"}], "hashtags": [], "urls": []}, "in_reply_to_status_id": null, "id_str": "168931016856178688", "place": null, "user": {"follow_request_sent": null, "profile_use_background_image": true, "profile_background_image_url_https": "https://si0.twimg.com/profile_background_images/416005864/Captura.JPG", "verified": false, "profile_image_url_https": "https://si0.twimg.com/profile_images/1808883280/Captura6_normal.JPG", "profile_sidebar_fill_color": "f5e7f3", "is_translator": false, "id": 406750700, "profile_text_color": "333333", "followers_count": 1122, "protected": false, "location": "Adentro de una supra.", "default_profile_image": false, "listed_count": 0, "utc_offset": -14400, "statuses_count": 20966, "description": "Mi \u00eddolo es @justinbieber , si te gusta \u00a1genial!, si no, solo respetalo. El cambi\u00f3 mi vida completamente y mi sue\u00f1o es conocerlo #TrueBelieber . ", "friends_count": 1015, "profile_link_color": "9404b8", "profile_image_url": "http://a1.twimg.com/profile_images/1808883280/Captura6_normal.JPG", "notifications": null, "show_all_inline_media": false, "geo_enabled": false, "profile_background_color": "f9fcfa", "id_str": "406750700", "profile_background_image_url": "http://a3.twimg.com/profile_background_images/416005864/Captura.JPG", "name": "neversaynever,right?", "lang": "es", "profile_background_tile": false, "favourites_count": 22, "screen_name": "True_Belieebers", "url": "http://www.wehavebieber-fever.tumblr.com", "created_at": "Mon Nov 07 04:17:40 +0000 2011", "contributors_enabled": false, "time_zone": "Santiago", "profile_sidebar_border_color": "C0DEED", "default_profile": false, "following": null}, "in_reply_to_screen_name": "justinbieber", "retweet_count": 0, "geo": null, "id": 168931016856178688, "source": "<a href=\"http://yfrog.com\" rel=\"nofollow\">Yfrog</a> At this point everything is great, I load up the script that resulted from a previous Stack Post: from disco.core import Job, result_iterator import gzip def map(line, params): import unicodedata import json r = json.loads(line).get('text') s = unicodedata.normalize('NFD', r).encode('ascii', 'ignore') for word in s.split(): yield word, 1 def reduce(iter, params): from disco.util import kvgroup for word, counts in kvgroup(sorted(iter)): yield word, sum(counts) if __name__ == '__main__': job = Job().run(input=["tag://data:test1"], map=map, reduce=reduce) for word, count in result_iterator(job.wait(show=True)): print word, count NOTE: That this script runs file if the input=["file.txt"], however when I run it with "tag://data:test1" I get the following error: # DISCO_EVENTS=1 python count_normal_words.py Job@549:db30e:25bd8: Status: [map] 0 waiting, 1 running, 0 done, 0 failed 2012/11/25 21:43:26 master New job initialized! 2012/11/25 21:43:26 master Starting job 2012/11/25 21:43:26 master Starting map phase 2012/11/25 21:43:26 master map:0 assigned to solice 2012/11/25 21:43:26 master ERROR: Job failed: Worker at 'solice' died: Traceback (most recent call last): File "/home/DISCO/data/solice/01/Job@549:db30e:25bd8/usr/local/lib/python2.7/site-packages/disco/worker/__init__.py", line 329, in main job.worker.start(task, job, **jobargs) File "/home/DISCO/data/solice/01/Job@549:db30e:25bd8/usr/local/lib/python2.7/site-packages/disco/worker/__init__.py", line 290, in start self.run(task, job, **jobargs) File "/home/DISCO/data/solice/01/Job@549:db30e:25bd8/usr/local/lib/python2.7/site-packages/disco/worker/classic/worker.py", line 286, in run getattr(self, task.mode)(task, params) File "/home/DISCO/data/solice/01/Job@549:db30e:25bd8/usr/local/lib/python2.7/site-packages/disco/worker/classic/worker.py", line 299, in map for key, val in self['map'](entry, params): File "count_normal_words.py", line 12, in map File "/usr/lib64/python2.7/json/__init__.py", line 326, in loads return _default_decoder.decode(s) File "/usr/lib64/python2.7/json/decoder.py", line 366, in decode obj, end = self.raw_decode(s, idx=_w(s, 0).end()) File "/usr/lib64/python2.7/json/decoder.py", line 384, in raw_decode raise ValueError("No JSON object could be decoded") ValueError: No JSON object could be decoded 2012/11/25 21:43:26 master WARN: Job killed Status: [map] 1 waiting, 0 running, 0 done, 1 failed Traceback (most recent call last): File "count_normal_words.py", line 28, in <module> for word, count in result_iterator(job.wait(show=True)): File "/usr/local/lib/python2.7/site-packages/disco/core.py", line 348, in wait timeout, poll_interval * 1000) File "/usr/local/lib/python2.7/site-packages/disco/core.py", line 309, in check_results raise JobError(Job(name=jobname, master=self), "Status %s" % status) disco.error.JobError: Job Job@549:db30e:25bd8 failed: Status dead The Error states: ValueError: No JSON object could be decoded. Again, this works fine using the text file as input but now DDFS. Any ideas, I'm open to suggestions?

    Read the article

  • scvmap, disco, xsd, wsdl, svcinfo and datasource files

    - by David Gray Wright
    We have a WEb Service named, let's say Foo. So there is a Foo.svc file and a code behind Foo.svc.cs. We add a silverlight project and wish to use the Foo.svc services so we add a Service Reference and call it's namespace FooBar. This creates the following files : Reference.cs Reference.svcmap Foo.xsd Foo.disco configuration.svcinfo Foo.wsdl Also various *.datasource files. Over time we update the Foo.svc and add more Web Services (methods and interfaces) and the number of files in the FooBar directory is growing. I have 26 Foo(nn).xsd files in this directory - where nn = 1 to 26. My configuration.svcinfo is upto configuration91.svcinfo. My question is this? Do any of these files need to be version controlled? Can they all be deleted each time you do a build \ deploy (as long as you do an update service reference)?

    Read the article

  • Adding third disk as a single disk in a server with an existing RAID1

    - by slowhandsolo
    I've got a ProLiant DL360 G5 server (Fedora 13) with two SAS disks in a hardware RAID 1, working fine. Now I hot plugged another SAS disk. I'd like to configure this new hard disk out of my RAID, as a single non-RAID disk (ex. /dev/sdb). Even after rebooting the server, I can't see the new disk with "fdisk -l". It displays only my hardware RAID, but not the new disk. [root@myserver]# fdisk -l Disco /dev/cciss/c0d0: 300.0 GB, 299966445568 bytes Disposit. Inicio Comienzo Fin Bloques Id Sistema /dev/cciss/c0d0p1 * 1 126 512000 83 Linux /dev/cciss/c0d0p2 126 71798 292422656 8e Linux LVM Disco /dev/dm-0: 234.9 GB, 234881024000 bytes Disco /dev/dm-1: 10.5 GB, 10536091648 bytes Disco /dev/dm-2: 21.0 GB, 20971520000 bytes Disco /dev/dm-3: 31.5 GB, 31474057216 bytes Disco /dev/dm-4: 1577 MB, 1577058304 bytes However, I can see the new disk using the HP Array Configuration Utility CLI for Linux "hpacucli": [root@myserver]# hpacucli => controller slot=0 physicaldrive all show status physicaldrive 1I:1:1 (port 1I:box 1:bay 1, 300 GB): OK physicaldrive 1I:1:2 (port 1I:box 1:bay 2, 300 GB): OK physicaldrive 1I:1:3 (port 1I:box 1:bay 3, 300 GB): OK => controller slot=0 pd all show detail Smart Array P400i in Slot 0 (Embedded) array A physicaldrive 1I:1:1 Port: 1I Box: 1 Bay: 1 physicaldrive 1I:1:2 Port: 1I Box: 1 Bay: 2 **unassigned** physicaldrive 1I:1:3 Port: 1I Box: 1 Bay: 3 Status: OK Drive Type: **Unassigned Drive** As you can see, I've got two SAS disks in a RAID 1 and the new disk as "unassigned". Is there any way to work with the new disk as another non-RAID single disk? If relevant, I want to create a new partition in my new disk, format it with mkfs and mount it, but as I can't see it with fdisk, I don't know how to do it. Thanks!

    Read the article

  • Seemingly simple skinning problem in Flex4; style gives disco effect

    - by Cheradenine
    I'm doing something wrong, but I can't figure out what. Simple project in flex4, whereby I create a skinned combobox (fragments at end). If I turn on the 3 skin references (over-skin, up-skin, down-skin), the combobox appears to simply stop working. If I remove the up-skin, hovering over the combo produces a flickering effect, where it appears to apply the style, then remove it immediately. I get the same thing with a button instead of a combo. I'm sure it's something really simple, but it's evading me. <?xml version="1.0" encoding="utf-8"?> <s:Application xmlns:fx="http://ns.adobe.com/mxml/2009" xmlns:s="library://ns.adobe.com/flex/spark" xmlns:mx="library://ns.adobe.com/flex/mx" minWidth="955" minHeight="600" xmlns:containers="flexlib.containers.*"> <fx:Declarations> <!-- Place non-visual elements (e.g., services, value objects) here --> </fx:Declarations> <fx:Style> @namespace s "library://ns.adobe.com/flex/spark"; @namespace mx "library://ns.adobe.com/flex/mx"; #myCombo { over-skin: ClassReference("nmx.MyComboSkin"); up-skin: ClassReference("nmx.MyComboSkin"); down-skin: ClassReference("nmx.MyComboSkin"); } </fx:Style> <fx:Script> <![CDATA[ [Bindable] public var items:Array = ["A","B","C"]; ]]> </fx:Script> <mx:Canvas backgroundColor="#ff0000" width="726" height="165" x="20" y="41"> <mx:ComboBox id="myCombo" x="10" y="10" prompt="Hospital" dataProvider="{items}"> </mx:ComboBox> </mx:Canvas> </s:Application> Skin Definition: package nmx { import flash.display.GradientType; import flash.display.Graphics; import mx.skins.Border; import mx.skins.ProgrammaticSkin; import mx.skins.halo.ComboBoxArrowSkin; import mx.skins.halo.HaloColors; import mx.utils.ColorUtil; public class MyComboSkin extends ProgrammaticSkin { public function MyComboSkin() { super(); } override protected function updateDisplayList(w:Number, h:Number):void { trace(name); super.updateDisplayList(w, h); var arrowColor:int = 0xffffff; var g:Graphics = graphics; g.clear(); // Draw the border and fill. switch (name) { case "upSkin": case "editableUpSkin": { g.moveTo(0,0); g.lineStyle(1,arrowColor); g.lineTo(w-1,0); g.lineTo(w-1,h-1); g.lineTo(0,h-1); g.lineTo(0,0); } break; case "overSkin": case "editableOverSkin": case "downSkin": case "editableDownSkin": { // border /*drawRoundRect( 0, 0, w, h, cr, [ themeColor, themeColor ], 1); */ g.moveTo(0,0); g.lineStyle(1,arrowColor); g.lineTo(w-1,0); g.lineTo(w-1,h-1); g.lineTo(0,h-1); g.lineTo(0,0); // Draw the triangle. g.beginFill(arrowColor); g.moveTo(w - 11.5, h / 2 + 3); g.lineTo(w - 15, h / 2 - 2); g.lineTo(w - 8, h / 2 - 2); g.lineTo(w - 11.5, h / 2 + 3); g.endFill(); } break; case "disabledSkin": case "editableDisabledSkin": { break; } } } } }

    Read the article

  • Problems installing Ubuntu server and desktop

    - by Rufus
    google translate Good afternoon I'm new to linux, I have to install a proxy and to them I decided on Ubuntu, the problem is that it took several days trying to install Ubuntu on any version and when installing i get error [Errno 5] input / output error says that is because the disc (cd or dvd) is bad or faulty change it and save all denuevo but I get the same error try changing the hard drive to see if my drive had no problem and I also get the same error , the machine where I want to mount the Ubuntu is a P4 with 1GB rAM and 40GB disk is more than the minimum requirements for even so I get the error ... I would like someone could help me thank you very much ..... original Problemas al instalar Ubuntu server y desktop Buenas tardes soy nuevo en linux, tengo que instalar un proxy y para ellos me decidi por Ubuntu, el problema es que llevo varios dias tratando de instalar Ubuntu en cualquiera de sus versiones y al momento de instalar me sale error [Errno 5] input/output error dice que se debe a que el disco (cd o dvd) esta malo o defectuoso lo cambie y grabe todo denuevo pero me sale el mismo error trate de cambiar el disco duro para ver si no tenia problema mi disco y tambien me sale el mismo error, la maquina donde quiero montar el Ubuntu es un p4 con 1gb ram y disco de 40gb, es mas de los requerimientos minimos por aun asi me sale el error... me gustaria que alguien me pudiera ayudar muchas gracias.....

    Read the article

  • Xen 4.0.1 on Ubuntu 10.10 not booting

    - by Disco
    I'm trying to get Xen 4.0.1 run as dom0 on a fresh/clean install of 10.10 desktop (x64). Followed the step by step tutorial at http://wiki.xensource.com/xenwiki/Xen4.0 I have the pvops kernel in /boot, also included the ext4 fs support by recompiling the kernel by : make -j6 linux-2.6-pvops-config CONFIGMODE=menuconfig make -j6 linux-2.6-pvops-build make -j6 linux-2.6-pvops-install Here's my grub entry : menuentry 'Xen4' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 insmod ext3 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set 2bf3177a-92fd-4196-901a-da8d810b04b4 multiboot /xen-4.0.gz dom0_mem=1024M loglvl=all guest_loglvl=all module /vmlinuz-2.6.32.27 root=UUID=2bf3177a-92fd-4196-901a-da8d810b04b4 ro module /initrd.img-2.6.32.27 } blkid /dev/sda1 gives the : /dev/sda1: UUID="2bf3177a-92fd-4196-901a-da8d810b04b4" TYPE="ext3" My partition shemes is : /boot (ext3) / (ext4) Whatever option i've tried i end up with : mounting none on /dev failed: no such file or directory And message complaining that it cannot find the device with uuid ... It's taking my hairs out, if somone has a clue ...

    Read the article

  • Building a custom Xsession with VNC access

    - by Disco
    I have a small project where I'll need to build a very minimal X11 environnement for a cyber coffee kind shop. My idea is to have a simple server which will create a dozen of VNC Daemon listening on a different port (each port = one client). The server is working, i can connect using vnc to different port. Now i'm looking for a solution to create a customized desktop for each client; with a bare minimum of apps which i want to be able to add for each user. Like user1 will have app1 and app2, user2 will have app1 only etc. I plan to use openbox as a WM but no clue on 'how' to add custom icons on the desktop of it. Any clue, starting point would be interesting.

    Read the article

  • Xen 4.0.1 not booting with device not found error

    - by Disco
    I'm trying to get Xen 4.0.1 run as dom0 on a fresh/clean install of 10.10 desktop (x64). Followed the step by step tutorial at http://wiki.xensource.com/xenwiki/Xen4.0 I have the pvops kernel in /boot, also included the ext4 fs support by recompiling the kernel by : make -j6 linux-2.6-pvops-config CONFIGMODE=menuconfig make -j6 linux-2.6-pvops-build make -j6 linux-2.6-pvops-install Here's my grub entry : menuentry 'Xen4' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 insmod ext3 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set 2bf3177a-92fd-4196-901a-da8d810b04b4 multiboot /xen-4.0.gz dom0_mem=1024M loglvl=all guest_loglvl=all module /vmlinuz-2.6.32.27 root=UUID=2bf3177a-92fd-4196-901a-da8d810b04b4 ro module /initrd.img-2.6.32.27 } blkid /dev/sda1 gives the : /dev/sda1: UUID="2bf3177a-92fd-4196-901a-da8d810b04b4" TYPE="ext3" My partition shemes is : /boot (ext3) / (ext4) Whatever option i've tried i end up with : mounting none on /dev failed: no such file or directory And message complaining that it cannot find the device with uuid ... It's taking my hairs out, if somone has a clue ...

    Read the article

  • Error Ubuntu 11.10 despues de instalar [Error after installing Ubuntu 11.10]

    - by manue
    instale ubuntu 11.10, termino de instalar y no tiene nada, ni aplicaciones, ni esa barrita lateral de unity, no tiene nada, ni si quiera la barra donde aparece la hora; porque? y me aparece un cuadro diciendo que hay un error en el disco y que el fallo es inminente , que es? SMART no entiendo, ayuda Y en otro disco duro con windows xp sp3 se bloquea cuando lo instalo desde el live cd, y desde wubi aparece esto enter link description here que hacer? English translation (via Google Translate, edited) I have installed ubuntu 11.10, after finishing the installing there is nothing, no applications, no the sidebar called unity, there is nothing, not even the bar where time appears, why?. I get a box saying there is an error on the disk and that failure is imminent. What is SMART, I do not understand, help In my other hard drive, with windows xp sp3, it crashes when I try install from the live cd using wubi, this appears, what to do?

    Read the article

  • Howo to get Multipath IO with Dell MD3600i into active/active setup?

    - by Disco
    I'm desperately trying to improve performance of my SAN connection. Here's what i have: [root@xnode1 dell]# multipath -ll mpath1 (36d4ae520009bd7cc0000030e4fe8230b) dm-2 DELL,MD36xxi [size=5.5T][features=3 queue_if_no_path pg_init_retries 50][hwhandler=1 rdac][rw] \_ round-robin 0 [prio=200][active] \_ 18:0:0:0 sdb 8:16 [active][ready] \_ 19:0:0:0 sdd 8:48 [active][ghost] \_ 20:0:0:0 sdf 8:80 [active][ghost] \_ 21:0:0:0 sdh 8:112 [active][ready] And multipath.conf : defaults { udev_dir /dev polling_interval 5 prio_callout none rr_min_io 100 max_fds 8192 user_friendly_names yes path_grouping_policy multibus default_features "1 fail_if_no_path" } blacklist { device { vendor "*" product "Universal Xport" } } devices { device { vendor "DELL" product "MD36xxi" path_checker rdac path_selector "round-robin 0" hardware_handler "1 rdac" failback immediate features "2 pg_init_retries 50" no_path_retry 30 rr_min_io 100 prio_callout "/sbin/mpath_prio_rdac /dev/%n" } } And sessions. [root@xnode1 dell]# iscsiadm -m session tcp: [13] 10.0.51.220:3260,1 iqn.1984-05.com.dell:powervault.md3600i.6d4ae520009bd7cc000000004fd7507c tcp: [14] 10.0.50.221:3260,2 iqn.1984-05.com.dell:powervault.md3600i.6d4ae520009bd7cc000000004fd7507c tcp: [15] 10.0.51.221:3260,2 iqn.1984-05.com.dell:powervault.md3600i.6d4ae520009bd7cc000000004fd7507c tcp: [16] 10.0.50.220:3260,1 iqn.1984-05.com.dell:powervault.md3600i.6d4ae520009bd7cc000000004fd7507c I'm getting very poor read performance : dd if=/dev/mapper/mpath1 of=/dev/null bs=1M count=1000 The SAN is configured as follows: CTRL0,PORT0 : 10.0.50.220 CTRL0,PORT1 : 10.0.50.221 CTRL1,PORT0 : 10.0.51.220 CTRL1,PORT1 : 10.0.51.221 And on the host : IF0 : 10.0.50.1 IF1 : 10.0.51.1 (Dual 10GbE Ethernet Card Intel DA2) It's connected to a 10gbE switch dedicated for SAN traffic. My questions being; why the connection is set up as 'ghost' and not 'ready' like an active/active configuration ?

    Read the article

  • Xvnc with XRENDER

    - by Disco
    Looking for Xvnc that has the RENDER extensions enabled. Only one i've found is the realvnc's one, but i'm unable to compile. I'm working on ubuntu jaunty amd64.

    Read the article

  • Xen 4.0.1 on Ubuntu 10.10 not booting

    - by Disco
    I'm trying to get Xen 4.0.1 run as dom0 on a fresh/clean install of 10.10 desktop (x64). Followed the step by step tutorial at http://wiki.xensource.com/xenwiki/Xen4.0 I have the pvops kernel in /boot, also included the ext4 fs support by recompiling the kernel by : make -j6 linux-2.6-pvops-config CONFIGMODE=menuconfig make -j6 linux-2.6-pvops-build make -j6 linux-2.6-pvops-install Here's my grub entry : menuentry 'Xen4' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 insmod ext3 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set 2bf3177a-92fd-4196-901a-da8d810b04b4 multiboot /xen-4.0.gz dom0_mem=1024M loglvl=all guest_loglvl=all module /vmlinuz-2.6.32.27 root=UUID=2bf3177a-92fd-4196-901a-da8d810b04b4 ro module /initrd.img-2.6.32.27 } blkid /dev/sda1 gives the : /dev/sda1: UUID="2bf3177a-92fd-4196-901a-da8d810b04b4" TYPE="ext3" My partition shemes is : /boot (ext3) / (ext4) Whatever option i've tried i end up with : mounting none on /dev failed: no such file or directory And message complaining that it cannot find the device with uuid ... It's taking my hairs out, if somone has a clue ...

    Read the article

  • Redirect 'host-based' requests to a port (inside a docker container)

    - by Disco
    I'm trying to achieve this fun project of having multiple 'postfix/dovecot' instances inside a docker container. I'm searching for 'something' that would redirect any incoming request on port 25 (any maybe later 143, 993) to the right container on a different port. Here's the idea : +-------+ +----------+ (internet)----(port 25) |mainbox| ---- (port 52032) |container1| (postfix) +-------+ | +----------+ \ (port 52033) +----------+ |container2| (postfix) +----------+ So the idea is to 'redirect' requests coming to port 25 and based on 'hostname' to forward to the right port (internally); ideally, it would be great to manage this 'mapping' with a database/textfile Any ideas ? Directions ?

    Read the article

  • how to prevent other computers from seeing our network computers through vpn

    - by Disco
    We have a local office domain consisting of Windows 7 and XP machines that is running on Windows Server 2008 R2. We also have users that connect via VPN into our network. My concern is that when a remote user opens up a folder, the Network section on the left side of the folder shows the remote user all the computer names in our local network. I would like to go about renaming our computers in the local network with more descriptive computer names, but I do not want the users off-site to be able to see these computer names by simply opening up a folder. (Granted, they can already do this, but our current naming scheme does not link computer names to users.) I would like to change our computer names so we can determine which computer belongs to which user more easily IF it can be done securely. How can I ensure that our local computer names are not showing up in the Network folder for remote, VPN-connected users? My online searches have turned up results where people are advised to turn off Network Sharing and Discovery, but that seems to only ensure that the local machine doesn't see other computer names. I want to prevent OUR computer names from showing up on OTHER computers, and I can't go into the VPN-connected computers and turn off THEIR Network Discovery settings. I would think there is a group policy that would control this but I have not found one yet and I don't know how I would apply it to VPN-connected computers. Thanks! EDIT: That's true, a Group Policy wouldn't run on users only connecting via VPN, good point. What about a VPN/router policy, then?

    Read the article

  • L2TP over IPSec VPN with OpenSwan and XL2TPD can't connect, timeout on Centos 6

    - by Disco
    I'm setting up LT2p over IPSec on my Centos 6.3 fresh install. I have iptables flushed, permit all. Whenever I try to connect, i get a 'no reply from vpn' and nothi Here's my ipsec.conf file (Server is 1.2.3.4) : config setup nat_traversal=yes virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12 oe=off protostack=netkey conn L2TP-PSK-NAT rightsubnet=vhost:%priv also=L2TP-PSK-noNAT conn L2TP-PSK-noNAT authby=secret pfs=no auto=add keyingtries=3 rekey=no ikelifetime=8h keylife=1h type=transport left=1.2.3.4 leftprotoport=17/1701 right=%any rightprotoport=17/%any My /etc/ipsec.secrets 1.2.3.4 %any: PSK "password" My sysctl.conf (appened lines) net.ipv4.ip_forward = 1 net.ipv4.conf.default.rp_filter = 0 net.ipv4.conf.all.send_redirects = 0 net.ipv4.conf.default.send_redirects = 0 net.ipv4.conf.all.log_martians = 0 net.ipv4.conf.default.log_martians = 0 net.ipv4.conf.default.accept_source_route = 0 net.ipv4.conf.all.accept_redirects = 0 net.ipv4.conf.default.accept_redirects = 0 net.ipv4.icmp_ignore_bogus_error_responses = 1 Here's what 'ipsec verify' gives: # ipsec verify Checking your system to see if IPsec got installed and started correctly: Version check and ipsec on-path [OK] Linux Openswan U2.6.32/K2.6.32-279.19.1.el6.x86_64 (netkey) Checking for IPsec support in kernel [OK] SAref kernel support [N/A] NETKEY: Testing for disabled ICMP send_redirects [OK] NETKEY detected, testing for disabled ICMP accept_redirects [OK] Checking that pluto is running [OK] Pluto listening for IKE on udp 500 [OK] Pluto listening for NAT-T on udp 4500 [OK] Checking for 'ip' command [OK] Checking /bin/sh is not /bin/dash [WARNING] Checking for 'iptables' command [OK] Opportunistic Encryption Support [DISABLED] And I see xl2tpd is listening on 1701/udp : udp 0 0 1.2.3.4:1701 0.0.0.0:* 2096/xl2tpd

    Read the article

  • How to force iscsi initiator to login only once

    - by Disco
    Trying to setup a few CentOS nodes to connect to a Dell MD3600i array, i'm running into the issue that the MD3600i shows 4 different portals (with different IP addresses) and when i launch the initiator on host side well, it connects to every IP address it has seen during the discovery phase; resulting in duplicates. How can I 'force' the initiator to discard every other IP and let me choose only one IP portal to connect to ? Must be damn stupid but I can't figure out how. Thx

    Read the article

  • How to best tune my SAN/Initiators for best performance?

    - by Disco
    Recent owner of a Dell PowerVault MD3600i i'm experiencing some weird results. I have a dedicated 24x 10GbE Switch (PowerConnect 8024), setup to jumbo frames 9K. The MD3600 has 2 RAID controllers, each has 2x 10GbE ethernet nics. There's nothing else on the switch; one VLAN for SAN traffic. Here's my multipath.conf defaults { udev_dir /dev polling_interval 5 selector "round-robin 0" path_grouping_policy multibus getuid_callout "/sbin/scsi_id -g -u -s /block/%n" prio_callout none path_checker readsector0 rr_min_io 100 max_fds 8192 rr_weight priorities failback immediate no_path_retry fail user_friendly_names yes # prio rdac } blacklist { device { vendor "*" product "Universal Xport" } # devnode "^sd[a-z]" } devices { device { vendor "DELL" product "MD36xxi" path_grouping_policy group_by_prio prio rdac # polling_interval 5 path_checker rdac path_selector "round-robin 0" hardware_handler "1 rdac" failback immediate features "2 pg_init_retries 50" no_path_retry 30 rr_min_io 100 prio_callout "/sbin/mpath_prio_rdac /dev/%n" } } And iscsid.conf : node.startup = automatic node.session.timeo.replacement_timeout = 15 node.conn[0].timeo.login_timeout = 15 node.conn[0].timeo.logout_timeout = 15 node.conn[0].timeo.noop_out_interval = 5 node.conn[0].timeo.noop_out_timeout = 10 node.session.iscsi.InitialR2T = No node.session.iscsi.ImmediateData = Yes node.session.iscsi.FirstBurstLength = 262144 node.session.iscsi.MaxBurstLength = 16776192 node.conn[0].iscsi.MaxRecvDataSegmentLength = 262144 After my tests; i can barely come to 200 Mb/s read/write. Should I expect more than that ? Providing it has dual 10 GbE my thoughts where to come around the 400 Mb/s. Any ideas ? Guidelines ? Troubleshooting tips ?

    Read the article

  • Qemu not installed on ubuntu with xen 4.0.1 ?

    - by Disco
    I'm kinda confused. I've installed Xen on a fresh/clean ubuntu 10.10 server (x64) using : hg clone xen-4.0-testing.hg make world make install-kernels Trying to launch qemu; first "not found" Then I installed from source (from tarballs at qemu.org) But then qemu complains about not finding /dev/kvm Am I missing something here ? I thought that qemu was part of xen install (at least it was from 3.x series). All i have is qemu-img-xen and qemu-nbd-xen.

    Read the article

  • Can't route specific subnet thru VPN in ubuntu

    - by Disco
    I'm having issues routing traffic thru VPN. Here's my setup I have 3 hosts, let's call them A, B and Z B and Z have a VPN connection in the 10.10.10.x SUBNET A and B have a direct connection in the 10.10.12.x SUBNET I want to be able to route traffic from A to Z, like : A <= 10.10.12.254 [LAN] 10.10.12.111 => B <= 10.10.10.152 [VPN] 10.10.10.10 => Z On host B, i have set up ip_forwarding : net.ipv4.ip_forward = 1 and routing on host B: [root@hostA: ~]# ip route 10.10.10.10 dev ppp0 proto kernel scope link src 10.10.10.152 10.10.12.0/24 dev eth1 proto kernel scope link src 10.10.12.111 10.10.10.0/24 dev ppp0 scope link 169.254.0.0/16 dev eth1 scope link routing on host A: [root@hostA: ~]# ip route 10.10.10.0 via 10.10.12.111 dev eth1 10.10.12.0/24 dev eth1 proto kernel scope link src 10.10.12.254 169.254.0.0/16 dev eth1 scope link default via 192.168.1.1 dev eth0 But still not able to ping 10.10.10.10 from host A. Any idea ? I'm pulling my hairs out.

    Read the article

1 2 3  | Next Page >