Search Results

Search found 36 results on 2 pages for 'dsc'.

Page 1/2 | 1 2  | Next Page >

• Getting USB Wifi device to work

  - by Lolwhites

  I have been trying to get an Olitec Wifi N USB dongle to work. At first it lit up but wouldn't connect. A little Googling suggested that it would need ndiswrapper to make it work. After installing and trying to add driver with ndisgtk, I got the error message FATAL: Module ndiswrapper not found., but the driver appears in the list of currently installed ones anyway. However, the situation appears even worse: The USB device doesn't even light up (which it does when plugged into my netbook), suggesting the thing isn't detected any more. How to I go about resolving this issue? I've tried uninstalling ndiswrapper but there seems to have been some permanent change as the device is still not lighting up, as it did at first. Edit: Contents of /etc/modprobe.d/ndiswrapper.conf alias usb:v04F2pAFF7d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v04F2pAFF8d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v04F2pAFF9d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v04F2pAFFAd*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v04F2pAFFBd*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v04F2pAFFCd*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v050Dp1102d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v050Dp2102d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v050Dp2103d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v0586p341Fd*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v06F8pE033d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v07AAp0056d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v07B8p8178d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v07B8p8189d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v0B05p17ABd*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v0BDAp8170d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v0BDAp8176d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v0BDAp8177d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v0BDAp8178d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v0BDAp817Ad*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v0BDAp817Bd*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v0BDAp817Cd*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v0BDAp817Ed*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v0BDAp817Fd*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v0BDAp8186d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v0BDAp8192d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v0BFFp8160d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v0DF6p0052d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v0DF6p005Cd*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v0DF6p0061d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v0EB0p9071d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v103Cp1629d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v13D3p3357d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v13D3p3358d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v13D3p3359d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v2001p3307d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v2001p3308d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v2001p3309d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v2001p330Ad*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v2019p1201d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v2019p4902d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v2019p4903d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v2019p4904d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v2019pAB2Ad*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v2019pAB2Bd*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v2019pAB2Cd*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v2019pAB2Ed*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v2019pED17d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v20F4p624Dd*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v20F4p648Bd*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v20F4p664Bd*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v4855p0090d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v4855p0091d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v4856p0091d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v7392p7811d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v7392p7822d*dc*dsc*dp*ic*isc*ip* ndiswrapper

  Read the article

• Install Exchange 2013 with DSC

  - by Alain Laventure

  I tried to install Exchange 2013 with the resource windowsProcess in existing Exchange Configuration. All prerequisites are installed (the Exchange Organization still exists). This is my Resource section: WindowsProcess Exchange2013 { Credential=$credential Path= "C:\Sources\Cumulative Update 5 for Exchange Server 2013 (KB2936880)\Setup.exe" Arguments= "/mode:Install /role:Mailbox /IAcceptExchangeServerLicenseTerms /TargetDir:C:\EX2013" Ensure= "Present" } #End Filter } #End Node } # End configuration /* @TargetNode='TargetDSC02' @GeneratedBy=exadmin @GenerationDate=08/02/2014 08:16:03 @GenerationHost=SOURCEDSC02 */ instance of MSFT_Credential as $MSFT_Credential1ref { Password = "Password1"; UserName = "S05\\Exadmin"; }; Exadmin is a member of Orgaganization Management Group and it is also member of Domain Admin Group, to be able to install Exchange When I execute this resource , Exchange Installation Start but after 1 minute the installation stops with this error: Failed [Rule:GlobalServerInstall] [Message:You must be a member of the 'Organization Management' role group or a member of the 'Enterprise Admins' group to continue.] To be sure that the right is really the problem I create a special User with only Administrator right of the Exchange server and with no Exchange Permission I run manually on the new Exchange server .\Setup.exe /mode:Install /role:Mailbox /IAcceptExchangeServerLicenseTerms /Targetdir:C:\EX2013 And I got the Same error that with DSC. After I add my test user in the Organization Management Group and I run again manually .\Setup.exe /mode:Install /role:Mailbox /IAcceptExchangeServerLicenseTerms /Targetdir:C:\EX2013 And the Exchange 2013 installation finish without any error. That prove that the problem with DSC is Permission right.

  Read the article

• wifi not recognized

  - by pumper

  I had wifi and worked then some day ubuntu asked me to update some packeages and restarted the system and after that no wifi. this is my wireless_script output : ########## wireless info START ########## ##### release ##### Distributor ID: Ubuntu Description: Ubuntu 14.04 LTS Release: 14.04 Codename: trusty ##### kernel ##### Linux S510p 3.13.0-24-generic #47-Ubuntu SMP Fri May 2 23:30:00 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux ##### lspci ##### 02:00.0 Network controller [0280]: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter [168c:0036] (rev 01) Subsystem: Lenovo Device [17aa:3026] Kernel driver in use: ath9k 03:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8162 Fast Ethernet [1969:1090] (rev 10) Subsystem: Lenovo Device [17aa:3807] Kernel driver in use: alx ##### lsusb ##### Bus 001 Device 006: ID 0eef:a111 D-WAV Scientific Co., Ltd Bus 001 Device 007: ID 0cf3:3004 Atheros Communications, Inc. Bus 001 Device 004: ID 174f:1488 Syntek Bus 001 Device 003: ID 03f0:5607 Hewlett-Packard Bus 001 Device 002: ID 8087:8000 Intel Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 002 Device 002: ID 15d9:0a4c Trust International B.V. USB+PS/2 Optical Mouse Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub ##### PCMCIA Card Info ##### ##### rfkill ##### 0: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 1: ideapad_bluetooth: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no 3: hci0: Bluetooth Soft blocked: no Hard blocked: no ##### iw reg get ##### country 00: (2402 - 2472 @ 40), (3, 20) (2457 - 2482 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS (2474 - 2494 @ 20), (3, 20), NO-OFDM, PASSIVE-SCAN, NO-IBSS (5170 - 5250 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS (5735 - 5835 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS ##### interfaces ##### # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback auto dsl-provider iface dsl-provider inet ppp pre-up /sbin/ifconfig wlan0 up # line maintained by pppoeconf provider dsl-provider auto wlan0 iface wlan0 inet manual ##### iwconfig ##### wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=16 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off ##### route ##### Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface ##### resolv.conf ##### ##### nm-tool ##### NetworkManager Tool State: connected (global) - Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: alx State: unavailable Default: no HW Address: <MAC address removed> Capabilities: Carrier Detect: yes Wired Properties Carrier: off - Device: wlan0 ---------------------------------------------------------------- Type: 802.11 WiFi Driver: ath9k State: unmanaged Default: no HW Address: <MAC address removed> Capabilities: Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points ##### NetworkManager.state ##### [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true ##### NetworkManager.conf ##### [main] plugins=ifupdown,keyfile,ofono dns=dnsmasq no-auto-default=<MAC address removed>, [ifupdown] managed=false ##### iwlist ##### wlan0 Scan completed : Cell 01 - Address: <MAC address removed> Channel:1 Frequency:2.412 GHz (Channel 1) Quality=55/70 Signal level=-55 dBm Encryption key:on ESSID:"mohsen" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 9 Mb/s; 12 Mb/s; 18 Mb/s Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s Mode:Master Extra:tsf=000000076c342498 Extra: Last beacon: 12ms ago IE: Unknown: 00066D6F6873656E IE: Unknown: 010882848B960C121824 IE: Unknown: 030101 IE: Unknown: 2A0104 IE: Unknown: 32043048606C ##### iwlist channel ##### wlan0 13 channels in total; available frequencies : Channel 01 : 2.412 GHz Channel 02 : 2.417 GHz Channel 03 : 2.422 GHz Channel 04 : 2.427 GHz Channel 05 : 2.432 GHz Channel 06 : 2.437 GHz Channel 07 : 2.442 GHz Channel 08 : 2.447 GHz Channel 09 : 2.452 GHz Channel 10 : 2.457 GHz Channel 11 : 2.462 GHz Channel 12 : 2.467 GHz Channel 13 : 2.472 GHz ##### lsmod ##### ath3k 13318 0 bluetooth 395423 23 bnep,ath3k,btusb,rfcomm ath9k 164164 0 ath9k_common 13551 1 ath9k ath9k_hw 453856 2 ath9k_common,ath9k ath 28698 3 ath9k_common,ath9k,ath9k_hw mac80211 626489 1 ath9k cfg80211 484040 3 ath,ath9k,mac80211 ##### modinfo ##### filename: /lib/modules/3.13.0-24-generic/kernel/drivers/bluetooth/ath3k.ko firmware: ath3k-1.fw license: GPL version: 1.0 description: Atheros AR30xx firmware driver author: Atheros Communications srcversion: 98A5245588C09E5E41690D0 alias: usb:v0489pE036d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0489pE03Cd*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0489pE02Cd*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3pE003d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3p3121d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v13D3p3402d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v04C5p1330d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0489pE04Dd*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0489pE056d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0489pE04Ed*dc*dsc*dp*ic*isc*ip*in* alias: usb:v13D3p3393d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0489pE057d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0930p0220d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0930p0219d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3pE005d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3pE004d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v13D3p3362d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v04CAp3008d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v04CAp3006d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v04CAp3005d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v04CAp3004d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v13D3p3375d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3p817Ad*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3p311Dd*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3p3008d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3p3004d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3p0036d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v03F0p311Dd*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0489pE027d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0489pE03Dd*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0930p0215d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v13D3p3304d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3pE019d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3p3002d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3p3000d*dc*dsc*dp*ic*isc*ip*in* depends: bluetooth intree: Y vermagic: 3.13.0-24-generic SMP mod_unload modversions signer: Magrathea: Glacier signing key sig_key: <MAC address removed>:D9:06:21:70:6E:8D:06:60:4D:73:0B:35:9F:C0 sig_hashalgo: sha512 filename: /lib/modules/3.13.0-24-generic/kernel/drivers/net/wireless/ath/ath9k/ath9k.ko license: Dual BSD/GPL description: Support for Atheros 802.11n wireless LAN cards. author: Atheros Communications srcversion: BAF225EEB618908380B28DA alias: platform:qca955x_wmac alias: platform:ar934x_wmac alias: platform:ar933x_wmac alias: platform:ath9k alias: pci:v0000168Cd00000036sv*sd*bc*sc*i* alias: pci:v0000168Cd00000036sv0000185Fsd00003027bc*sc*i* alias: pci:v0000168Cd00000036sv00001B9Asd00002810bc*sc*i* alias: pci:v0000168Cd00000036sv0000144Fsd00007202bc*sc*i* alias: pci:v0000168Cd00000036sv00001A3Bsd00002130bc*sc*i* alias: pci:v0000168Cd00000036sv000011ADsd00000612bc*sc*i* alias: pci:v0000168Cd00000036sv000011ADsd00000652bc*sc*i* alias: pci:v0000168Cd00000036sv000011ADsd00000642bc*sc*i* alias: pci:v0000168Cd00000036sv0000168Csd0000302Cbc*sc*i* alias: pci:v0000168Cd00000036sv0000168Csd00003027bc*sc*i* alias: pci:v0000168Cd00000036sv0000144Dsd0000411Ebc*sc*i* alias: pci:v0000168Cd00000036sv0000144Dsd0000411Dbc*sc*i* alias: pci:v0000168Cd00000036sv0000144Dsd0000411Cbc*sc*i* alias: pci:v0000168Cd00000036sv0000144Dsd0000411Bbc*sc*i* alias: pci:v0000168Cd00000036sv0000144Dsd0000411Abc*sc*i* alias: pci:v0000168Cd00000036sv00001028sd0000020Ebc*sc*i* alias: pci:v0000168Cd00000036sv0000103Csd0000217Fbc*sc*i* alias: pci:v0000168Cd00000036sv0000103Csd000018E3bc*sc*i* alias: pci:v0000168Cd00000036sv000017AAsd00003026bc*sc*i* alias: pci:v0000168Cd00000036sv00001A3Bsd0000213Abc*sc*i* alias: pci:v0000168Cd00000036sv000011ADsd00000662bc*sc*i* alias: pci:v0000168Cd00000036sv000011ADsd00000672bc*sc*i* alias: pci:v0000168Cd00000036sv000011ADsd00000622bc*sc*i* alias: pci:v0000168Cd00000036sv0000185Fsd00003028bc*sc*i* alias: pci:v0000168Cd00000036sv0000105Bsd0000E069bc*sc*i* alias: pci:v0000168Cd00000036sv0000168Csd0000302Bbc*sc*i* alias: pci:v0000168Cd00000036sv0000168Csd00003026bc*sc*i* alias: pci:v0000168Cd00000036sv0000168Csd00003025bc*sc*i* alias: pci:v0000168Cd00000036sv00001B9Asd00002812bc*sc*i* alias: pci:v0000168Cd00000036sv00001B9Asd00002811bc*sc*i* alias: pci:v0000168Cd00000036sv000011ADsd00006671bc*sc*i* alias: pci:v0000168Cd00000036sv000011ADsd00000632bc*sc*i* alias: pci:v0000168Cd00000036sv0000185Fsd0000A119bc*sc*i* alias: pci:v0000168Cd00000036sv0000105Bsd0000E068bc*sc*i* alias: pci:v0000168Cd00000036sv00001A3Bsd00002176bc*sc*i* alias: pci:v0000168Cd00000036sv0000168Csd00003028bc*sc*i* alias: pci:v0000168Cd00000037sv*sd*bc*sc*i* alias: pci:v0000168Cd00000034sv*sd*bc*sc*i* alias: pci:v0000168Cd00000034sv000010CFsd00001783bc*sc*i* alias: pci:v0000168Cd00000034sv000014CDsd00000064bc*sc*i* alias: pci:v0000168Cd00000034sv000014CDsd00000063bc*sc*i* alias: pci:v0000168Cd00000034sv0000103Csd00001864bc*sc*i* alias: pci:v0000168Cd00000034sv000011ADsd00006641bc*sc*i* alias: pci:v0000168Cd00000034sv000011ADsd00006631bc*sc*i* alias: pci:v0000168Cd00000034sv00001043sd0000850Ebc*sc*i* alias: pci:v0000168Cd00000034sv00001A3Bsd00002110bc*sc*i* alias: pci:v0000168Cd00000034sv00001969sd00000091bc*sc*i* alias: pci:v0000168Cd00000034sv000017AAsd00003214bc*sc*i* alias: pci:v0000168Cd00000034sv0000168Csd00003117bc*sc*i* alias: pci:v0000168Cd00000034sv000011ADsd00006661bc*sc*i* alias: pci:v0000168Cd00000034sv00001A3Bsd00002116bc*sc*i* alias: pci:v0000168Cd00000033sv*sd*bc*sc*i* alias: pci:v0000168Cd00000032sv*sd*bc*sc*i* alias: pci:v0000168Cd00000032sv00001043sd0000850Dbc*sc*i* alias: pci:v0000168Cd00000032sv00001B9Asd00001C01bc*sc*i* alias: pci:v0000168Cd00000032sv00001B9Asd00001C00bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00001F95bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00001195bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00001F86bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00001186bc*sc*i* alias: pci:v0000168Cd00000032sv00001B9Asd00002001bc*sc*i* alias: pci:v0000168Cd00000032sv00001B9Asd00002000bc*sc*i* alias: pci:v0000168Cd00000032sv0000144Fsd00007197bc*sc*i* alias: pci:v0000168Cd00000032sv0000105Bsd0000E04Fbc*sc*i* alias: pci:v0000168Cd00000032sv0000105Bsd0000E04Ebc*sc*i* alias: pci:v0000168Cd00000032sv000011ADsd00006628bc*sc*i* alias: pci:v0000168Cd00000032sv000011ADsd00006627bc*sc*i* alias: pci:v0000168Cd00000032sv00001C56sd00004001bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00002100bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00002C97bc*sc*i* alias: pci:v0000168Cd00000032sv000017AAsd00003219bc*sc*i* alias: pci:v0000168Cd00000032sv000017AAsd00003218bc*sc*i* alias: pci:v0000168Cd00000032sv0000144Dsd0000C708bc*sc*i* alias: pci:v0000168Cd00000032sv0000144Dsd0000C680bc*sc*i* alias: pci:v0000168Cd00000032sv0000144Dsd0000C706bc*sc*i* alias: pci:v0000168Cd00000032sv0000144Dsd0000410Fbc*sc*i* alias: pci:v0000168Cd00000032sv0000144Dsd0000410Ebc*sc*i* alias: pci:v0000168Cd00000032sv0000144Dsd0000410Dbc*sc*i* alias: pci:v0000168Cd00000032sv0000144Dsd00004106bc*sc*i* alias: pci:v0000168Cd00000032sv0000144Dsd00004105bc*sc*i* alias: pci:v0000168Cd00000032sv0000185Fsd00003027bc*sc*i* alias: pci:v0000168Cd00000032sv0000185Fsd00003119bc*sc*i* alias: pci:v0000168Cd00000032sv0000168Csd00003122bc*sc*i* alias: pci:v0000168Cd00000032sv0000168Csd00003119bc*sc*i* alias: pci:v0000168Cd00000032sv0000105Bsd0000E075bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00002152bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd0000126Abc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00002126bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00001237bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00002086bc*sc*i* alias: pci:v0000168Cd00000030sv*sd*bc*sc*i* alias: pci:v0000168Cd0000002Esv*sd*bc*sc*i* alias: pci:v0000168Cd0000002Dsv*sd*bc*sc*i* alias: pci:v0000168Cd0000002Csv*sd*bc*sc*i* alias: pci:v0000168Cd0000002Bsv*sd*bc*sc*i* alias: pci:v0000168Cd0000002Bsv00001A3Bsd00002C37bc*sc*i* alias: pci:v0000168Cd0000002Asv000010CFsd00001536bc*sc*i* alias: pci:v0000168Cd0000002Asv000010CFsd0000147Dbc*sc*i* alias: pci:v0000168Cd0000002Asv000010CFsd0000147Cbc*sc*i* alias: pci:v0000168Cd0000002Asv0000185Fsd0000309Dbc*sc*i* alias: pci:v0000168Cd0000002Asv00001A32sd00000306bc*sc*i* alias: pci:v0000168Cd0000002Asv000011ADsd00006642bc*sc*i* alias: pci:v0000168Cd0000002Asv000011ADsd00006632bc*sc*i* alias: pci:v0000168Cd0000002Asv0000105Bsd0000E01Fbc*sc*i* alias: pci:v0000168Cd0000002Asv00001A3Bsd00001C71bc*sc*i* alias: pci:v0000168Cd0000002Asv*sd*bc*sc*i* alias: pci:v0000168Cd00000029sv*sd*bc*sc*i* alias: pci:v0000168Cd00000027sv*sd*bc*sc*i* alias: pci:v0000168Cd00000024sv*sd*bc*sc*i* alias: pci:v0000168Cd00000023sv*sd*bc*sc*i* depends: ath9k_hw,mac80211,ath9k_common,cfg80211,ath intree: Y vermagic: 3.13.0-24-generic SMP mod_unload modversions signer: Magrathea: Glacier signing key sig_key: <MAC address removed>:D9:06:21:70:6E:8D:06:60:4D:73:0B:35:9F:C0 sig_hashalgo: sha512 parm: debug:Debugging mask (uint) parm: nohwcrypt:Disable hardware encryption (int) parm: blink:Enable LED blink on activity (int) parm: btcoex_enable:Enable wifi-BT coexistence (int) parm: bt_ant_diversity:Enable WLAN/BT RX antenna diversity (int) parm: ps_enable:Enable WLAN PowerSave (int) filename: /lib/modules/3.13.0-24-generic/kernel/drivers/net/wireless/ath/ath9k/ath9k_common.ko license: Dual BSD/GPL description: Shared library for Atheros wireless 802.11n LAN cards. author: Atheros Communications srcversion: 696B00A6C59713EC0966997 depends: ath,ath9k_hw intree: Y vermagic: 3.13.0-24-generic SMP mod_unload modversions signer: Magrathea: Glacier signing key sig_key: <MAC address removed>:D9:06:21:70:6E:8D:06:60:4D:73:0B:35:9F:C0 sig_hashalgo: sha512 filename: /lib/modules/3.13.0-24-generic/kernel/drivers/net/wireless/ath/ath9k/ath9k_hw.ko license: Dual BSD/GPL description: Support for Atheros 802.11n wireless LAN cards. author: Atheros Communications srcversion: 4809F3842A0542CD6B556D3 depends: ath intree: Y vermagic: 3.13.0-24-generic SMP mod_unload modversions signer: Magrathea: Glacier signing key sig_key: <MAC address removed>:D9:06:21:70:6E:8D:06:60:4D:73:0B:35:9F:C0 sig_hashalgo: sha512 filename: /lib/modules/3.13.0-24-generic/kernel/drivers/net/wireless/ath/ath.ko license: Dual BSD/GPL description: Shared library for Atheros wireless LAN cards. author: Atheros Communications srcversion: 88A67C5359B02C5A710AFCF depends: cfg80211 intree: Y vermagic: 3.13.0-24-generic SMP mod_unload modversions signer: Magrathea: Glacier signing key sig_key: <MAC address removed>:D9:06:21:70:6E:8D:06:60:4D:73:0B:35:9F:C0 sig_hashalgo: sha512 ##### modules ##### lp rtc ##### blacklist ##### [/etc/modprobe.d/blacklist-ath_pci.conf] blacklist ath_pci [/etc/modprobe.d/blacklist.conf] blacklist evbug blacklist usbmouse blacklist usbkbd blacklist eepro100 blacklist de4x5 blacklist eth1394 blacklist snd_intel8x0m blacklist snd_aw2 blacklist i2c_i801 blacklist prism54 blacklist bcm43xx blacklist garmin_gps blacklist asus_acpi blacklist snd_pcsp blacklist pcspkr blacklist amd76x_edac [/etc/modprobe.d/fbdev-blacklist.conf] blacklist arkfb blacklist aty128fb blacklist atyfb blacklist radeonfb blacklist cirrusfb blacklist cyber2000fb blacklist gx1fb blacklist gxfb blacklist kyrofb blacklist matroxfb_base blacklist mb862xxfb blacklist neofb blacklist nvidiafb blacklist pm2fb blacklist pm3fb blacklist s3fb blacklist savagefb blacklist sisfb blacklist tdfxfb blacklist tridentfb blacklist viafb blacklist vt8623fb ##### udev rules ##### # PCI device 0x1969:0x1090 (alx) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="<MAC address removed>", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0" # PCI device 0x168c:0x0036 (ath9k) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="<MAC address removed>", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="wlan*", NAME="wlan0" ##### dmesg ##### [ 1.707662] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f03) [ 11.918852] ath: phy0: WB335 1-ANT card detected [ 11.918856] ath: phy0: Set BT/WLAN RX diversity capability [ 11.926438] ath: phy0: Enable LNA combining [ 11.928469] ath: phy0: ASPM enabled: 0x42 [ 11.928473] ath: EEPROM regdomain: 0x65 [ 11.928475] ath: EEPROM indicates we should expect a direct regpair map [ 11.928478] ath: Country alpha2 being used: 00 [ 11.928479] ath: Regpair used: 0x65 [ 14.066021] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready ########## wireless info END ############

  Read the article

• Installing an exe with Powershell DSC Package resource gets return code 1619

  - by Jay Spang

  I'm trying to use Powershell DSC's Package resource to install an exe... Perforce's P4V to be specific. Here's my code: Configuration PerforceMachine { Node "SERVERNAME" { Package P4V { Ensure = "Present" Name = "Perforce Visual Components" Path = "\\nas\share\p4vinst64.exe" ProductId = '' Arguments = "/S /V/qn" # args for silent mode LogPath = "$env:ProgramData\p4v_install.log" } } } When running this, this is the error Powershell gives me: PowerShell provider MSFT_PackageResource failed to execute Set-TargetResource functionality with error message: The return code 1619 was not expected. Configuration is likely not correct + CategoryInfo : InvalidOperation: (:) [], CimException + FullyQualifiedErrorId : ProviderOperationExecutionFailure + PSComputerName : SERVERNAME According to documentation, return code 1619 means the MSI package couldn't be opened. However, when I manually log in to the machine and run "\\nas\share\p4vinst64.exe /S /V/qn", the install works flawlessly. Does anyone know why this is failing? Alternately, can anyone tell me how to troubleshoot this? I pasted all the error information I got from the terminal, my log file (p4v_install.log) is a 0 byte file, and there are no events in the event viewer. I don't know how to troubleshoot it any further! EDIT: I should note that I also tried using the File resource to copy the file locally, and then install it from there. Sadly, that met with the same result.

  Read the article

• Problems creating a debdiff

  - by Chris Wilson

  I'm following this guide to create a debdiff for a package I'm patching. Everything goes fine until step number 8 and I attempt to create the debdiff after committing the changes. The package in question is Zim, pulled form Launchpad using bzr branch lp:zim and according to this guide I should execute the following command to create the debdiff: debdiff zim_0.49.dsc zim_0.49ubuntu1.dsc > zim_0.49ubuntu1.debdiff however, when I actually try to execute this command, I get the following error: debdiff: fatal error at line 314: Can't read file: zim_0.49.dsc Upon inspection of the directory in which the files created from debuild -S (step 6) are deposited, I find zim_0.49ubuntu1_source.changes zim_0.49ubuntu1.dsc zim_0.49ubuntu1.tar.gz zim_0.49ubuntu1_source.build but no sign of zim_0.49.dsc. I could probably create one by debuilding the package as soon as I check out the code, before starting work, but that would add an extraneous entry in the changelog. Is there a step missing from the guide that creates zim_0.49.dsc or is the file itself missing from the source?

  Read the article

• Puppet: Making Windows Awesome Since 2011

  - by Robz / Fervent Coder

  Originally posted on: http://geekswithblogs.net/robz/archive/2014/08/07/puppet-making-windows-awesome-since-2011.aspxPuppet was one of the first configuration management (CM) tools to support Windows, way back in 2011. It has the heaviest investment on Windows infrastructure with 1/3 of the platform client development staff being Windows folks.  It appears that Microsoft believed an end state configuration tool like Puppet was the way forward, so much so that they cloned Puppet’s DSL (domain-specific language) in many ways and are calling it PowerShell DSC. Puppet Labs is pushing the envelope on Windows. Here are several things to note: Puppet x64 Ruby support for Windows coming in v3.7.0. An awesome ACL module (with order, SIDs and very granular control of permissions it is best of any CM). A wealth of modules that work with Windows on the Forge (and more on GitHub). Documentation solely for Windows folks - https://docs.puppetlabs.com/windows. Some of the common learning points with Puppet on Windows user are noted in this recent blog post. Microsoft OpenTech supports Puppet. Azure has the ability to deploy a Puppet Master (http://puppetlabs.com/solutions/microsoft). At Microsoft //Build 2014 in the Day 2 Keynote Puppet Labs CEO Luke Kanies co-presented with Mark Russonivich (http://channel9.msdn.com/Events/Build/2014/KEY02  fast forward to 19:30)! Puppet has a Visual Studio Plugin! It can be overwhelming learning a new tool like Puppet at first, but Puppet Labs has some resources to help you on that path. Take a look at the Learning VM, which has a quest-based learning tool. For real-time questions, feel free to drop onto #puppet on freenode.net (yes, some folks still use IRC) with questions, and #puppet-dev with thoughts/feedback on the language itself. You can subscribe to puppet-users / puppet-dev mailing lists. There is also ask.puppetlabs.com for questions and Server Fault if you want to go to a Stack Exchange site. There are books written on learning Puppet. There are even Puppet User Groups (PUGs) and other community resources! Puppet does take some time to learn, but with anything you need to learn, you need to weigh the benefits versus the ramp up time. I learned NHibernate once, it had a very high ramp time back then but was the only game on the street. Puppet’s ramp up time is considerably less than that. The advantage is that you are learning a DSL, and it can apply to multiple platforms (Linux, Windows, OS X, etc.) with the same Puppet resource constructs. As you learn Puppet you may wonder why it has a DSL instead of just leveraging the language of Ruby (or maybe this is one of those things that keeps you up wondering at night). I like the DSL over a small layer on top of Ruby. It allows the Puppet language to be portable and go more places. It makes you think about the end state of what you want to achieve in a declarative sense instead of in an imperative sense. You may also find that right now Puppet doesn’t run manifests (scripts) in order of the way resources are specified. This is the number one learning point for most folks. As a long time consternation of some folks about Puppet, manifest ordering was not possible in the past. In fact it might be why some other CMs exist! As of 3.3.0, Puppet can do manifest ordering, and it will be the default in Puppet 4. http://puppetlabs.com/blog/introducing-manifest-ordered-resources You may have caught earlier that I mentioned PowerShell DSC. But what about DSC? Shouldn’t that be what Windows users want to choose? Other CMs are integrating with DSC, will Puppet follow suit and integrate with DSC? The biggest concern that I have with DSC is it’s lack of visibility in fine-grained reporting of changes (which Puppet has). The other is that it is a very young Microsoft product (pre version 3, you know what they say :) ). I tried getting it working in December and ran into some issues. I’m hoping that newer releases are there that actually work, it does have some promising capabilities, it just doesn’t quite come up to the standard of something that should be used in production. In contrast Puppet is almost a ten year old language with an active community! It’s very stable, and when trusting your business to configuration management, you want something that has been around awhile and has been proven. Give DSC another couple of releases and you might see more folks integrating with it. That said there may be a future with DSC integration. Portability and fine-grained reporting of configuration changes are reasons to take a closer look at Puppet on Windows. Yes, Puppet on Windows is here to stay and it’s continually getting better folks.

  Read the article

• Problems uploading package to launchpad

  - by user74513

  I'm having a lot of problems uploading my showdown project to a PPA. I've setup correctly PGP keys and my public ssh key to launchpad. I've packaged with debuild my C++ project, producing a source package lintian gave me only those two warnings that I think are ok for the showdown rules: W: massren source: native-package-with-dash-version W: massren source: binary-nmu-debian-revision-in-source 1.0-0extras12.04.1~ppa2 Producing a binary package works to and the package installs without problem on my ubuntu 12.04 machine, I only have a few more lintian warnings about the fact I'm installing in /opt/extras.ubuntu.com/ I'm uploading with: dput ppa:gabrielegreco/massren massren_1.0-0extras12.04.1~ppa2_source.changes When I upload with dput I have no errors, signatures seems ok, and public key seems accepted to (since the upload goes on without asking passwords...): dput ppa:gabrielegreco/massren massren_1.0-0extras12.04.1~ppa2_source.changes Checking signature on .changes gpg: Signature made Mon 02 Jul 2012 10:00:38 AM CEST using RSA key ID 49982576 gpg: Good signature from "Gabriele Greco " Good signature on /home/gabry/no-backup/massren_1.0-0extras12.04.1~ppa2_source.changes. Checking signature on .dsc gpg: Signature made Mon 02 Jul 2012 10:00:33 AM CEST using RSA key ID 49982576 gpg: Good signature from "Gabriele Greco " Good signature on /home/gabry/no-backup/massren_1.0-0extras12.04.1~ppa2.dsc. Uploading to ppa (via ftp to ppa.launchpad.net): Uploading massren_1.0-0extras12.04.1~ppa2.dsc: done. Uploading massren_1.0-0extras12.04.1~ppa2.tar.gz: done. Uploading massren_1.0-0extras12.04.1~ppa2_source.changes: done. Successfully uploaded packages. At the moment I'm not receiving responses from launchpad site, but the upload does not show in the ppa page. Previous attempts gave me response e-mails with different kind of errors: File massren_1.0-0extras12.04.1~ppa1.tar.gz mentioned in the changes has a checksum mismatch. 1503fa155226cbc4aba2f8ba9aa11a75 != 294a5e0caf3fe95b0b007a10766e9672 File massren_1.0-0extras12.04.1~ppa1.tar.gz mentioned in the changes has a checksum mismatch. 1503fa155226cbc4aba2f8ba9aa11a75 != 294a5e0caf3fe95b0b007a10766e9672 Or more cryptic: GPG verification of /srv/launchpad.net/ppa-queue/incoming/upload-ftp-20120629-163320-001135/~gabrielegreco/massren/ubuntu/massren_1.0-0extras12.04.1~ppa1.dsc failed: Verification failed 3 times: ["(7, 58, u'No data')", "(7, 58, u'No data')", "(7, 58, u'No data')"] Further error processing not possible because of a critical previous error. Any idea how can I solve this problem? I'm new to ubuntu packaging, so I may miss some step... There is an alternative to dput (aka manual upload)?

  Read the article

• Upload to PPA succeeded but packages doesn't appear

  - by lorin

  I'm trying to upload packages to my PPA for the first time. I want to use the PPA for customized versions of the OpenStack Compute (nova) project, so I tried to do a test by uploading packages corresponding to the bexar release of this project (lp:nova/bexar), with a new version number and changelog entry. I signed the source packages using my OpenGPG key, which has been uploaded to the ubuntu keyserver: $ dch -v 2011.1-0ubuntu2-isi1 -D lucid "ISI bexar build #1" $ dpkg-buildpackage -s -rfakeroot -tc -D -k4C8A14AB When I tried to upload the files to the repository, it seemed to work (real email obscured): $ dput ppa:lorinh/ppa nova_2011.2~bzr663-1isi1_source.changes Checking signature on .changes gpg: Signature made Fri 11 Feb 2011 03:52:50 PM EST using RSA key ID 4C8A14AB gpg: Good signature from "Lorin Hochstein <lorin@...>" Good signature on /home/lorin/packaging/nova_2011.2~bzr663-1isi1_source.changes. Checking signature on .dsc gpg: Signature made Fri 11 Feb 2011 03:52:44 PM EST using RSA key ID 4C8A14AB gpg: Good signature from "Lorin Hochstein <lorin@...>" Good signature on /home/lorin/packaging/nova_2011.2~bzr663-1isi1.dsc. Uploading to ppa (via ftp to ppa.launchpad.net): Uploading nova_2011.2~bzr663-1isi1.dsc: done. Uploading nova_2011.2~bzr663-1isi1.tar.gz: done. Uploading nova_2011.2~bzr663-1isi1_source.changes: done. However, the packages aren't listed on my PPA page. If I try to upload again, I get the error: $ dput ppa:lorinh/ppa nova_2011.2~bzr663-1isi1_source.changes Package has already been uploaded to ppa on ppa.launchpad.net Nothing more to do for nova_2011.2~bzr663-1isi1_source.changes Am I supposed to do something next? How do I track down what wrong? As of this writing, it's been a day and a half since I've done the upload.

  Read the article

• Getting file not found error with pdebuild

  - by user35042

  I am attempting to build a Debian package using pdebuild on my main development server (running Debian wheezy). Here is the command I run: pdebuild --pbuilder cowbuilder --buildresult .. \ --debbuildopts -i -- \ --basepath /var/cache/pbuilder/base-wheezy.cow \ --distribution wheezy --configfile /etc/pbuilder/wheezy This works on other servers, but on one server I get this output: I: using cowbuilder as pbuilder dpkg-buildpackage: source package libexample-orange-util-perl dpkg-buildpackage: source version 0.08 dpkg-buildpackage: source changed by John User <[email protected]> dpkg-source -i --before-build libexample-orange-util-perl fakeroot debian/rules clean dh clean dh_testdir dh_auto_clean dh_clean dpkg-source -i -b libexample-orange-util-perl dpkg-source: info: using source format `3.0 (native)' dpkg-source: info: building libexample-orange-util-perl in libexample-orange-util-perl_0.08.tar.gz dpkg-source: info: building libexample-orange-util-perl in libexample-orange-util-perl_0.08.dsc dpkg-genchanges -S >../libexample-orange-util-perl_0.08_source.changes dpkg-genchanges: including full source code in upload dpkg-source -i --after-build libexample-orange-util-perl dpkg-buildpackage: source only upload: Debian-native package File not found: ../libexample-orange-util-perl_0.08.dsc There is no file ../libexample-orange-util-perl_0.08.dsc, but on other build servers no such file is needed (it gets created by the package build). What is causing this "file not found" error?

  Read the article

• How to take search query and append modifers to the end of it

  - by Kimber

  This is a greasemonkey question. What I'm trying to do is modify an old google discussions script. What were wanting to do is be able to take the google search query and add modifiers to the end of it. Like this: search query: "superuser" modifiers: inurl:greasemonkey+question end result: "superuser" inurl:greasemonkey+question The old script creates a new div within the "hdtb_more_mn" element which is where you get the new discussions tab. However, since the "tbm=dsc" option to do a discussion search has died, this script no longer works. Hence the need to add modifiers to your searches. I tried to edit the script, but it appends the modifiers to the end of the url which includes "&client=firefox-a&hs=8uS&rls=org.mozilla:en-US:official". This means you're also searching for the above as well as your query, which doesn't work. I would like to be able to append the modifiers @ the end of the search querty, rather than the whole URL. I'm just not sure how to code it to where it adds the below "&tbm=" stuff within "discussionDiv.innerHTML" to the end of the query. The google search id seems to be, "gbqfq" for the search box, but I'm not sure how to add this id. Here is the old script // ==UserScript== // @name Add Back Google Discussions // @version 1.4 // @description Adds back the Discussion filters to Google Search // @include *://*.google.tld/search* // ==/UserScript== var url = location.href; if (url.indexOf('tbm=dsc') < 0) addFilterType('dsc', 'Discussions'); function addFilterType(val, name) { var searchType = document.getElementById('hdtb_more_mn'); var discussionDiv = document.createElement('DIV'); discussionDiv.className = 'hdtb_mitem'; discussionDiv.innerHTML = '<a class="q qs" href="'+ (url.replace(/&tbm=[^&]*/g,'') + '&tbm=' + val) +'">'+name+'</a>'; searchType.innerHTML += discussionDiv.outerHTML; } Thanks for any help, or suggestions on who to ask. Google Chrome has an extension for discussion searches, but FF doesn't seem to have one as of yet, which is why I'm trying to modify the above.

  Read the article

• Remove querystring from URL

  - by Malcolm Frexner

  What is an easy way to remove the querystring from a Path in Javascript? I have seen a plugin for Jquery that uses window.location.search. I can not do that: The URL in my case is a variable that is set from AJAX. var testURL = '/Products/List?SortDirection=dsc&Sort=price&Page=3&Page2=3&SortOrder=dsc'

  Read the article

• Added key, but still getting "gpg: Can't check signature: public key not found"

  - by gertvdijk

  Trying to download Django source package using dget and the .dsc file from here. Then dget fails to verify the source, because it is missing a public key. $ dget https://launchpad.net/ubuntu... [...] dscverify: python-django_1.4.1-2.dsc failed signature check: gpg: Signature made Tue 21 Aug 2012 09:12:04 CEST using RSA key ID F2AC729A gpg: Can't check signature: public key not found Validation FAILED!! Fine, I added this key to my keyring, because I think I can trust this one: $ gpg --keyserver keyserver.ubuntu.com --recv-key 0xF2AC729A gpg: requesting key F2AC729A from hkp server keyserver.ubuntu.com gpg: key F2AC729A: "Raphaël Hertzog <[email protected]>" not changed gpg: Total number processed: 1 gpg: unchanged: 1 (well, this output is run afterwards, when it was already in my keyring) And it is really there: $ gpg --fingerprint F2AC729A pub 4096R/F2AC729A 2009-05-07 Key fingerprint = 3E4F B711 7877 F589 DBCF 06D6 E619 045D F2AC 729A uid Raphaël Hertzog <[email protected]> uid Raphaël Hertzog (Debian) <[email protected]> uid Raphaël Hertzog (Freexian SARL) <[email protected]> sub 2048R/71F23DEE 2009-05-07 But still fails for the same reason: gpg: Signature made Tue 21 Aug 2012 09:12:04 CEST using RSA key ID F2AC729A gpg: Can't check signature: public key not found I'm running all these commands as my regular user. I also tried adding this key to APT's keyring and root's keyring. Both to no avail. What am I missing here?

  Read the article

• why does .replace method use forward slash characters to enclose the first argument?

  - by Phillip Dodd

  I am working through a book about Javascript and have encountered the following example of code designed to replace the value of the class attribute of a table header HTML element: th.className = th.className.replace(/asc/,"dsc"); th.className = th.className.replace(/dsc/,"asc"); Why is the first parameter of .replace, the current value of th.className, enclosed in forward slashes instead of quotation marks? Why not use quotation marks to enclose both parameters, not just the second one? Thank you in advance for any help given. First time posting, apologies if I duplicated a question despite searching the site before posting.

  Read the article

• Nginx Redirect when URL includes variable p=1

  - by ChrisD

  Need to write a small nginx rewrite line(s) to alter/301 redirect some URLs within our existing website. for example: www.example.com.au/pageone.html?p=1 to www.example.com.au/pageone.html www.example.com.au/pagetwo.html?dir=asc&limit=200&order=price&p=1 to www.example.com.au/pagetwo.html?dir=asc&limit=200&order=price www.example.com.au/pagethree.html?dir=dsc&limit=100&order=price&p=1 to www.example.com.au/pagethree.html?dir=dsc&limit=100&order=price As you can see p=1 has been stripped from the URL's (as it is superfluous but has been live on the site and needs to be redirected now) - all http and https links. Basically if, and only if, p=1 is used anywhere within the URL then it should redirect to the same URL without the p=1. This should also let p=11, p=12 through as normal (and not redirect), as it is not specifically p=1. # # # # If that is not possible then, I'd like to know how to redirect this kind of URL as a standalone one off: www.example.com.au/pageone.html?p=1 to www.example.com.au/pageone.html I tried several redirects but they were all pointless and did not work, and was not able to get it working. To be honest I do not really know where to start with this - I am new to nginx.

  Read the article

• Twice as long and half as long

  - by PointsToShare

  We are in a project and we hit some snags. What’s a snag? An activity that takes longer than expected. Actually it takes longer than the time assigned to it by an over pressed PM who accepts an impossible time table and tries his best to make it possible, but I digress (again!).  So we have snags and we also have the opposite. Let’s call these “cinches”. The question is: how does a combination of snags and cinches affect the project timeline? Well, there is no simple answer. It depends on the projects dependencies as we see in the PERT chart. If all the snags are in the critical path and all the cinches are elsewhere then the cinches don’t help at all. In fact any snag in the critical path will delay the project.  Conversely, a cinch in the critical path will expedite it. A snag outside the critical path might be serious enough to even change the critical path. Thus without the PERT chart, we cannot really tell. Still there is a principle involved – Time and speed are non-linear! Twice as long adds a full unit, half as long only takes ½ unit away. Let’s just investigate a simple project. It consists of two activities – S and C - each estimated to take a week. Alas, S is a snag and really needs twice the time allotted and – a sigh of relief – C is a cinch and will take half the time allotted, so everything is Hun-key-dory, or is it?  Even here the PERT chart is important. We have 2 cases: 1: S depends on C (or vice versa) as in when the two activities are assigned to one employee. Here the estimated time was 1 + 1 and the actual time was 2 + ½ and we are ½ week late or 25% late. 2: S and C are done in parallel. Here the estimated time was 1, but the actual time is 2 – we are a whole week or 100% late. Let’s change the equation a little. S need 1.5 and C needs .5 so in case 1, we have the loss fully compensated by the gain, but in case 2 we are still behind. There are cases where this really makes no difference. This is when the critical path is not affected and we have enough slack in the other paths to counteract the difference between its snags and cinches – Let’s call this difference DSC. So if the slack is greater than DSC the project will not suffer. Conclusion: There is no general rule about snags and cinches. We need to examine each case within its project, still as we saw in the 4 examples above; the snag is generally more powerful than the cinch. Long live Murphy! That’s All Folks

  Read the article

• GoldenGate 12c - MySQL Active-Active Replication Setup

  - by Jinyu Wang-Oracle

  Active-active  (also called Master-Master or Bi-Directional) replication captures data changes from two or more systems and replicat the changes to synchronize the data.  Active-Active replication is often needed for high availability, load balancing and scaling out purposes.   Oracle GoldenGate is known to be one of the first and the best replication tool handling active-active replications. As of Oracle GoldenGate 12c, it provides (Refer to Oracle GoldenGate 12.1.2 Documentation - Configuring Oracle GoldenGate for Active-Active High Availability for more information) the followings: Robust loop-back prevention Comprehensive conflict resolution and detection support Heterogeneous support across different database versions and operation systems.  Oracle GoldenGate supports active-active configurations for DB2 on z/OS, LUW, and IBM i, MySQL, Oracle, SQL/MX,SQL Server, Sybase, and Teradata. However, the setup is different from database to database. In this example, I will show you how to setup an active-active data replication between two MySQL database instances. The example setup below is to have active-active replication between MySQL 5.5 and MySQL 5.6 instances and is shown as follows: MySQL 5.5 (Manager Port: 15105)  Extract EXTRACT demoex01 SETENV (MYSQL_UNIX_PORT='/home/oracle/software/mysql_5.5.38/data/mysql.sock') DBOPTIONS CONNECTIONPORT 3305 DBOPTIONS HOST oraclelinux6.localdomain SOURCEDB test USERID root, PASSWORD mysql EXTTRAIL ./dirdat/extract/de TRANLOGOPTIONS ALTLOGDEST "/home/oracle/software/mysql_5.5.38/data/binlog/bin-log.index" FILTERTABLE test.checkpoint_tbl REPORTROLLOVER AT 05:30 ON saturday TABLE test.TCUSTMER; TABLE test.TCUSTORD; Pump EXTRACT demopm01 RMTHOST localhost, MGRPORT 15106, COMPRESS, TIMEOUT 30 RMTTRAIL ./dirdat/replicat/ps PASSTHRU TABLE test.TCUSTMER; TABLE test.TCUSTORD; Replicat replicat demorp01 setenv (MYSQL_UNIX_PORT='/home/oracle/software/mysql_5.5.38/data/mysql.sock') dboptions host oraclelinux6.localdomain, connectionport 3305 targetdb test, userid root, password mysql sourcedefs ./dirdat/replicat/democust.def discardfile ./dirrpt/demprp01.dsc, purge REPERROR (DEFAULT, ABEND) REPERROR(1062, IGNORE) map test.TCUSTMER, target test.TCUSTMER,colmap(usedefaults, region_code="region code"); map test.TCUSTORD, target test.TCUSTORD; MySQL 5.6 (Manager Port: 15106) Replicat replicat demorp01 setenv (MYSQL_UNIX_PORT='/home/oracle/software/mysql_5.6.19/data/mysql.sock') dboptions host oraclelinux6.localdomain, connectionport 3306 targetdb test, userid root, password mysql --assumetargetdefs sourcedefs ./dirdat/replicat/democust.def discardfile ./dirrpt/demprp01.dsc, purge map test.TCUSTMER, target test.TCUSTMER, colmap(usedefaults, "region code"=region_code); map test.TCUSTORD, target test.TCUSTORD; Extract EXTRACT demoex01 SETENV (MYSQL_UNIX_PORT='/home/oracle/software/mysql_5.6.19/data/mysql.sock') DBOPTIONS CONNECTIONPORT 3306 DBOPTIONS HOST oraclelinux6.localdomain SOURCEDB test USERID root, USERID mysql EXTTRAIL ./dirdat/extract/de TRANLOGOPTIONS ALTLOGDEST "/usr/local/mysql56/data/binlog/bin-log.index" FILTERTABLE test.checkpoint_tbl TABLE test.TCUSTMER; TABLE test.TCUSTORD; Pump EXTRACT demopm01 RMTHOST localhost, MGRPORT 15105, COMPRESS, TIMEOUT 30 RMTTRAIL ./dirdat/replicat/ps PASSTHRU TABLE test.TCUSTMER; TABLE test.TCUSTORD; The setup parameters are quite self-explanatory. The key setup is to avoid the replication data  looping. Oracle GoldenGate for MySQL uses the information in the replication checkpoint table to identify the transaction applied by replicats and thus avoid extracting those transactions by Oracle GoldenGate extracts. The example setup in the extract in MySQL 5.5 instance is shown as follows.  TRANLOGOPTIONS ALTLOGDEST "/home/oracle/software/mysql_5.5.38/data/binlog/bin-log.index" FILTERTABLE test.checkpoint_tbl Setting up an active-active replication is often more complicated than this and requires the following additional considerations. I would elaborate on this in the follow-up discussions. 

  Read the article

• Can't install drivers for Epson wp-4530

  - by Rick

  It looks like it's installing ok then I get an error: (Reading database ... 177199 files and directories currently installed.) Unpacking epson-inkjet-printer-escpr:i386 (from .../epson-inkjet-printer-escpr_1.3.0-1lsb3.2_i386.deb) ... dpkg: dependency problems prevent configuration of epson-inkjet-printer-escpr:i386: epson-inkjet-printer-escpr:i386 depends on lsb (>= 3.2). dpkg: error processing epson-inkjet-printer-escpr:i386 (--install): dependency problems - leaving unconfigured Errors were encountered while processing: epson-inkjet-printer-escpr:i386 Can anyone help me with this? Tried install under linux mint 14 and ubuntu 12.04 same problem. Tried installing using cups and Software center. Driver is from http://download.ebz.epson.net/dsc/search/01/search/?OSC=LX which is only driver site I can find for this printer Please help

  Read the article

• Building lirc package from source with patches

  - by joystick

  I'd like to build latest lirc package for 12.04 with two patches from http://bit.ly/17779VW to make USB Infrared toy v2 work: Running sudo apt-build source lirc gave me ? build ll total 960 drwxr-xr-x 10 root root 4096 Nov 5 07:07 lirc-0.9.0 -rw-r--r-- 1 root root 113909 May 5 2011 lirc_0.9.0-0ubuntu1.debian.tar.gz -rw-r--r-- 1 root root 1553 May 5 2011 lirc_0.9.0-0ubuntu1.dsc -rw-r--r-- 1 root root 857286 May 5 2011 lirc_0.9.0.orig.tar.bz2 in /var/cache/apt-build/build. Running sudo apt-build build-source lirc then gave me Some error occured building package which is not really informative. I have successfully built patched lirc from source but now I would like to get a deb package. Where can I look for this 'some errors' in detail? Thank you, Alexei

  Read the article

• How I can Install csh as a non-root user?

  - by user288566

  Hi I need csh for installing a package but I am not root user... I want to install it for my user. I installed csh_20070713.orig.tar.gz, csh_20070713.diff.gz and csh_20070713-2ubuntu1.dsc But there is not dpkg-source command... then I did following procedure: untar *.tar.gz mv csh_20070713.orig csh_20070713 mkdir csh_20070713/debian gunzip csh_20070713.diff.gz patch -p0 < csh_20070713.diff chmod +x csh_20070713/debian/rules but I do not know what should I do next! I used make and make install command in csh_20070713 directory and also debian directory but nothing happened... Plz help me... Thanks

  Read the article

• Simplest way to match array of strings to search in perl?

  - by Ben Dauphinee

  What I want to do is check an array of strings against my search string and get the corresponding key so I can store it. Is there a magical way of doing this with Perl, or am I doomed to using a loop? If so, what is the most efficient way to do this? I'm relatively new to Perl (I've only written 2 other scripts), so I don't know a lot of the magic yet, just that Perl is magic =D Reference Array: (1 = 'Canon', 2 = 'HP', 3 = 'Sony') Search String: Sony's Cyber-shot DSC-S600 End Result: 3

  Read the article

• Simplest way to match 2d array of keys/strings to search in perl?

  - by Ben Dauphinee

  Related to my previous question (found here), I want to be able to implement the answers given with a 2 dimensional array, instead of one dimensional. Reference Array row[1][0]: 13, row[1][1]: Sony row[0][0]: 19, row[0][1]: Canon row[2][0]: 25, row[2][1]: HP Search String: Sony's Cyber-shot DSC-S600 End Result: 13

  Read the article

• Given a debian source package - How do I install the build-deps?

  - by Rory McCann

  I have a debian (well technically ubuntu) source package, i.e. the .dsc, the .tar.gz, etc., I want to build this. The dpkg-buildpackage fails, since I don't have all the build dependencies. Normally I'd use apt-get build-dep, but this package isn't in apt. Is there a 'clean', 'proper' way to install all the build dependencies, given a source package. I know I could just open the debian/control file, but I'm curious if there's a 'proper' way.

  Read the article

• Bootstrap a debian build environment and build source packages with no root privileges

  - by Erwan Queffélec

  On debian squeeze, I am trying to do the following : fetch sources package from the wheezy source repository bootstrap a squeeze chroot for several architectures build the packages for several architectures (i386, amd64 + all and any) I want both the fetching, bootstrapping and build operation to be scriptable, repeatable, and run as a normal user. For the environment setup, I want to make as little use of the root account as possible (install the necessary dependencies, and maybe some visudo stuff). If possible I would like to avoid using a VM (pbuilder with user mode linux) So far I have tried several things with pbuilder (require root), debootstrap (require root) with little success. Here is an example script of what I want to do (does not work): #/bin/bash set -e set -x this=`readlink -f $0` this_dir=`dirname $this` archs='i386 amd64 any all' pushd $this_dir/src # I actually want the following line to work with a repo that # is not in /etc/apt/sources.list but that is another question apt-get source cyrus-imapd-2.4 popd for arch in $archs do build_dir=$this_dir/build/$arch/ pbuilder --create --configfile $build_dir/pbuilderrc --buildresult $build_dir/ pbuilder --build --configfile $build_dir/pbuilderrc --buildresult \ $build_dir/ $this_dir/src/*.dsc # of course I want to use the .dput.cf in /home/myuser/ # and not in /root/ dput $build_dir/$arch/*.changes done

  Read the article

• How do I compile mercurial 1.5.2 on debian?

  - by Aaron Digulla

  I downloaded the files for Mercurial 1.5.2 from http://packages.debian.org/sid/mercurial (mercurial_1.5.2-1.debian.tar.gz, mercurial_1.5.2-1.dsc and mercurial_1.5.2.orig.tar.gz). How do I get a .deb package out of these? I tried to follow the instructions at http://www.debian.org/doc/maint-guide/ch-build.en.html but they don't work. I tried to unpack the two archives and run dpkg-buildpackage or debian/rules build but that fails with: dh --with quilt clean dh_testdir debian/rules override_dh_auto_clean make[1]: Entering directory `/home/user/packages/mercurial-deb' cp -a mercurial/__version__.py mercurial/__version__.py.save cp: cannot stat `mercurial/__version__.py': No such file or directory make[1]: *** [override_dh_auto_clean] Error 1 make[1]: Leaving directory `/home/user/packages/mercurial-deb' make: *** [clean] Error 2 That's because the directory mercurial is inside mercurial_1.5.2/. Why doesn't the build script cd into the right place? If I try ../debian/rules build, I get dh --with quilt build dh: cannot read debian/control: No such file or directory sigh How do I compile a package for debian???

  Read the article

• Windows Server Configuration Management Best Practices

  - by Anton Gogolev

  Chef/Pupper/Ansible are cool and all, but they are second-class citizens on Windows at best. We have a bunch of "snowflake" (one of a kind) machines (baremetal and virtual) that nobody really know what's going on with. What I want is to start establishing basic configuration management for said servers, starting from installing Windows, installing and enabling various Roles and Features, setting up Services, Shares, Users and deploying webapps. PowerShell DSC looks promising, but it's not yet here and appears to be over-engineered, Puppet and the like are again not first-class. There's a bunch of tooks and TLAs like Windows ADK, DISM, OCSetup, etc. and it seems to me that the "Configuration Management" story on Windows is not precisely rainbows and unicorns. What I want is a Puppet/Chef-like, lightweight tool (no System Center Configuration Management, please) which would allow us to "version-control our server infrastructure" and bring all the benefits of CM. So, where do I look for the tool that does this kind of thing?

  Read the article

1 2  | Next Page >