Search Results

Search found 23 results on 1 pages for 'ewald hofman'.

Page 1/1 | 1 

• C++ How to deep copy a struct with unknown datatype?

  - by Ewald Peters

  hi, i have a "data provider" which stores its output in a struct of a certain type, for instance struct DATA_TYPE1{ std::string data_string; }; then this struct has to be casted into a general datatype, i thought about void * or char *, because the "intermediate" object that copies and stores it in its binary tree should be able to store many different types of such struct data. struct BINARY_TREE_ENTRY{ void * DATA; struct BINARY_TREE_ENTRY * next; }; this void * is then later taken by another object that casts the void * back into the (struct DATA_TYPE1 *) to get the original data. so the sender and the receiver know about the datatype DATA_TYPE1 but not the copying object inbetween. but how can the intermidiate object deep copy the contents of the different structs, when it doesn't know the datatype, only void * and it has no method to copy the real contents; dynamic_cast doesn't work for void *; the "intermediate" object should do something like: void store_data(void * CASTED_DATA_STRUCT){ void * DATA_COPY = create_a_deepcopy_of(CASTED_DATA_STRUCT); push_into_bintree(DATA_COPY); } a simple solution would be that the sending object doesn't delete the sent data struct, til the receiving object got it, but the sending objects are dynamically created and deleted, before the receiver got the data from the intermediate object, for asynchronous communication, therefore i want to copy it. instead of converting it to void * i also tried converting to a superclass pointer of which the intermediate copying object knows about, and which is inherited by all the different datatypes of the structs: struct DATA_BASE_OBJECT{ public: DATA_BASE_OBJECT(){} DATA_BASE_OBJECT(DATA_BASE_OBJECT * old_ptr){ std::cout << "this should be automatically overridden!" << std::endl; } virtual ~DATA_BASE_OBJECT(){} }; struct DATA_TYPE1 : public DATA_BASE_OBJECT { public: string str; DATA_TYPE1(){} ~DATA_TYPE1(){} DATA_TYPE1(DATA_TYPE1 * old_ptr){ str = old_ptr->str; } }; and the corresponding binary tree entry would then be: struct BINARY_TREE_ENTRY{ struct DATA_BASE_OBJECT * DATA; struct BINARY_TREE_ENTRY * next; }; and to then copy the unknown datatype, i tried in the class that just gets the unknown datatype as a struct DATA_BASE_OBJECT * (before it was the void *): void * copy_data(DATA_BASE_OBJECT * data_that_i_get_in_the_sub_struct){ struct DATA_BASE_OBJECT * copy_sub = new DATA_BASE_OBJECT(data_that_i_get_in_the_sub_struct); push_into_bintree(copy_sub); } i then added a copy constructor to the DATA_BASE_OBJECT, but if the struct DATA_TYPE1 is first casted to a DATA_BASE_OBJECT and then copied, the included sub object DATA_TYPE1 is not also copied. i then thought what about finding out the size of the actual object to copy and then just memcopy it, but the bytes are not stored in one row and how do i find out the real size in memory of the struct DATA_TYPE1 which holds a std::string? Which other c++ methods are available to deepcopy an unknown datatype (and to maybe get the datatype information somehow else during runtime) thanks Ewald

  Read the article

• Set a login with username/password for SQL Server 2008 Express

  - by Ewald Stieger

  I would like to set a password and username for connecting to a server with SQL Management Studio 2008. I set up SQL Server 2008 Express on a customer's computer to host a DB used by an Access 2007 app. The customer should not be able to access the DB or connect with SQL Management Studio. How do I set up a login and remove any logins that allow a user to connect via Windows Authentication and without entering a username and password? I have not much experience with logins and controlling access.

  Read the article

• When should I use Areas in TFS instead of Team Projects

  - by Martin Hinshelwood

  Well, it depends…. If you are a small company that creates a finite number of internal projects then you will find it easier to create a single project for each of your products and have TFS do the heavy lifting with reporting, SharePoint sites and Version Control. But what if you are not… Update 9th March 2010 Michael Fourie gave me some feedback which I have integrated. Ed Blankenship via @edblankenship offered encouragement and a nice quote. Ewald Hofman gave me a couple of Cons, and maybe a few more soon. Ewald’s company, Avanade, currently uses Areas, but it looks like the manual management is getting too much and the project is getting cluttered. What if you are likely to have hundreds of projects, possibly with a multitude of internal and external projects? You might have 1 project for a customer or 10. This is the situation that most consultancies find themselves in and thus they need a more sustainable and maintainable option. What I am advocating is that we should have 1 “Team Project” per customer, and use areas to create “sub projects” within that single “Team Project”. "What you describe is what we generally do internally and what we recommend. We make very heavy use of area path to categorize the work within a larger project." - Brian Harry, Microsoft Technical Fellow & Product Unit Manager for Team Foundation Server   "We tend to use areas to segregate multiple projects in the same team project and it works well." - Tiago Pascoal, Visual Studio ALM MVP   "In general, I believe this approach provides consistency [to multi-product engagements] and lowers the administration and maintenance costs. All good." - Michael Fourie, Visual Studio ALM MVP   “@MrHinsh BTW, I'm very much a fan of very large, if not huge, team projects in TFS. Just FYI :) Use Areas & Iterations.” Ed Blankenship, Visual Studio ALM MVP   This would mean that SSW would have a single Team Project called “SSW” that contains all of our internal projects and consequently all of the Areas and Iteration move down one hierarchy to accommodate this. Where we would have had “\SSW\Sprint 1” we now have “\SSW\SqlDeploy\Sprint1” with “SqlDeploy” being our internal project. At the moment SSW has over 70 internal projects and more than 170 total projects in TFS. This method has long term benefits that help to simplify the support model for companies that often have limited internal support time and many projects. But, there are implications as TFS does not provide this model “out-of-the-box”. These implications stretch across Areas, Iterations, Queries, Project Portal and Version Control. Michael made a good comment, he said: I agree with your approach, assuming that in a multi-product engagement with a client, they are happy to adopt the same process template across all products. If they are not, then it’ll either be easy to convince them or there is a valid reason for having a different template - Michael Fourie, Visual Studio ALM MVP   At SSW we have a standard template that we use and this is applied across the board, to all of our projects. We even apply any changes to the core process template to all of our existing projects as well. If you have multiple projects for the same clients on multiple templates and you want to keep it that way, then this approach will not work for you. However, if you want to standardise as we have at SSW then this approach may benefit you as well. Implications around Areas Areas should be used for topological classification/isolation of work items. You can think of this as architecture areas, organisational areas or even the main features of your application. In our scenario there is an additional top level item that represents the Project / Product that we want to chop our Team Project into. Figure: Creating a sub area to represent a product/project is easy. <teamproject> <teamproject>\<Functional Area/module whatever> Becomes: <teamproject> <teamproject>\<ProjectName>\ <teamproject>\<ProjectName>\<Functional Area/module whatever> Implications around Iterations Iterations should be used for chronological classification/isolation of work items. This could include isolated time boxes, milestones or release timelines and really depends on the logical flow of your project or projects. Due to the new level in Area we need to add the same level to Iteration. This is primarily because it is unlikely that the sprints in each of your projects/products will start and end at the same time. This is just a reality of managing multiple projects. Figure: Adding the same Area value to Iteration as the top level item adds flexibility to Iteration. <teamproject>\Sprint 1 Or <teamproject>\Release 1\Sprint 1 Becomes: <teamproject>\<ProjectName>\Sprint 1 Or <teamproject>\<ProjectName>\Release 1\Sprint 1 Implications around Queries Queries are used to filter your work items based on a specified level of granularity. There are a number of queries that are built into a project created using the MSF Agile 5.0 template, but we now have multiple projects and it would be a pain to have to edit all of the work items every time we changed project, and that would only allow one team to work on one project at a time.   Figure: The Queries that are created in a normal MSF Agile 5.0 project do not quite suit our new needs. In order for project contributors to be able to query based on their project we need a couple of things. The first thing I did was to create an “_Area Template” folder that has a copy of the project layout with all the queries setup to filter based on the “_Area Template” Area and the “_Sprint template” you can see in the Area and Iteration views. Figure: The template is currently easily drag and drop, but you then need to edit the queries to point at the right Area and Iteration. This needs a tool. I then created an “Areas” folder to hold all of the area specific queries. So, when you go to create a new TFS Sub-Project you just drag “_Area Template” while holding “Ctrl” and drop it onto “Areas”. There is a little setup here. That said I managed it in around 10 minutes which is not so bad, and I can imagine it being quite easy to build a tool to create these queries Figure: These new queries can be configured in around 10 minutes, which includes setting up the Area and Iteration as well. Version Control What about your source code? Well, that is the easiest of the lot. Just create a sub folder for each of your projects/products.   Figure: Creating sub folders in source control is easy as “Right click | Create new folder”. <teamproject>\DEV\Main\ Becomes: <teamproject>\<ProjectName>\DEV\Main\ Conclusion I think it is up to each company to make a call on how you want to configure your Team Projects and it depends completely on how many projects/products you are going to have for each customer including yourself. If we decide to utilise this route it will require some configuration to get our 170+ projects into this format, and I will probably be writing some tools to help. Pros You only have one project to upgrade when a process template changes – After going through an upgrade of over 170 project prior to the changes in the RC I can tell you that that many projects is no fun. Standardises your Process Template – You will always have the same Process implementation across projects/products without exception You get tighter control over the permissions – Yes, you can do this on a standard Team Project, but it gets a lot easier with practice. You can “move” work items from one “product” to another – Have we not always wanted to do that. You can rename your projects – Wahoo: everyone wants to do this, now you can. One set of Reporting Services reports to manage – You set an area and iteration to run reports anyway, so you may as well set both. Simplified Check-In Policies– There is only one set of check-in policies per client. This simplifies administration of policies. Simplified Alerts – As alerts are applied across multiple projects this simplifies your alert rules as per client. Cons All of these cons could be mitigated by a custom tool that helps automate creation of “Sub-projects” within Team Projects. This custom tool could create areas, Iteration, permissions, SharePoint and queries. It just does not exist yet :) You need to configure the Areas and Iterations You need to configure the permissions You may need to configure sub sites for SharePoint (depends on your requirement) – If you have two projects/products in the same Team Project then you will not see the burn down for each one out-of-the-box, but rather a cumulative for the Team Project. This is not really that much of a problem as you would have to configure your burndown graphs for your current iteration anyway. note: When you create a sub site to a TFS linked portal it will inherit the settings of its parent site :) This is fantastic as it means that you can easily create sub sites and then set the Area and Iteration path in each of the reports to be the correct one. Every team wants their own customization (via Ewald Hofman) - small teams of 2 persons against teams of 30 – or even outsourcing – need their own process, you cannot allow that because everybody gets the same work item types. note: Luckily at SSW this is not a problem as our template is standardised across all projects and customers. Large list of builds (via Ewald Hofman) – As the build list in Team Explorer is just a flat list it can get very cluttered. note: I would mitigate this by removing any build that has not been run in over 30 days. The build template and workflow will still be available in version control, but it will clean the list. Feedback Now that I have explained this method, what do you think? What other pros and cons can you see? What do you think of this approach? Will you be using it? What tools would you like to support you?   Technorati Tags: Visual Studio ALM,TFS Administration,TFS,Team Foundation Server,Project Planning,TFS Customisation

  Read the article

• Incrementing Assembly Version in TFS Builds and its affect over Other Build Definitions

  - by ssmantha

  A very common scenario while performing TFS builds is to increment version number of the assemblies. There are quite a few approaches of which I would like to share two links: Ewald Hofman’s Approach: http://www.ewaldhofman.nl/post/2010/05/13/Customize-Team-Build-2010-e28093-Part-5-Increase-AssemblyVersion.aspx#id_02e7b082-ce95-49a9-92e9-7dc88887b377 Richard Bank’s Approach : http://www.richard-banks.org/2010/07/how-to-versioning-builds-with-tfs-2010.html   Both these approaches work well, however there are scenarios where Editing and Checking–in the Assembly version information can create problems with Build Definitions meant for Continuous Integration, or gated Check-ins. You can suppress the Continuous Integration Builds while checking in the Assembly info file by just putting a comment “***NO_CI***” as specified by Ewald in his blog. However, if you have Gated Checkin in place, this can turn out to be difficult to suppress, I myself tried to suppress the Build Trigger during the check in process but things doesn’t turn out well. That’s where Richard’s solution comes as handy. Both the solutions have their own pros and cons, which I believe can only be experienced over a period of time. In case of Richard’s solution I believe that we don’t have any history of the Assembly Version Info file and when you take latest of the solution the information will be lost. If you notice closely, that suppressing the Continuous Integration (the NO_CI approach in check in comments) is a workaround provided by Microsoft, however I didn’t find anything to suppress the gated Checkin so far. Suggestions or Findings are most welcome.

  Read the article

• Managing a file-based public maven repository

  - by Roland Ewald

  I am looking for an easy way to manage a public file-based Maven repository. While we are using the open-source version of Artifactory internally, we now want to put a file-based repository of our published artifacts (and their dependencies) on a separate machine that is publicly available. There are several ways how to do this, but none of them seems ideal: Use Maven Dependency plugin: if it is configured correctly and executed with the goal dependency:copy-dependencies for the release-module of our project, it creates a local repository structure that is fine, but this structure does not contain the meta-data.xml files, nor the hash-sums. Use Artifactory to export repo: AFAIK Artifactory only allows to export a repository as a whole. This would include the non-published modules from our project (which would then need to be deleted manually). Also, all dependencies are sitting in another repository, so this needs to be done twice, and many dependencies are not even required by a published artifact (only by artifacts that are still for internal use only). Nevertheless, this method would also include the meta-data.xml files and the hash-sums for all files. To set up an initial version of the repository, I used a mixture of both methods: I first created the Maven repository for all required dependencies via dependency:copy-dependencies and then wrote a script to cherry-pick the meta-data.xml files (etc.) from Artifactory. This is terribly cumbersome, isn't there a better way to solve this? Maybe there is another Maven 3 - plugin that I am unaware of, or some other command-line tool that does the job? I basically just need a simple way to create a Maven repository that contains all artifacts a given artifact depends on (and no more), and also contains all meta-data expected in a remote repository. Any ideas?

  Read the article

• Use a Cursor field in another method

  - by Mats Hofman

  Hi, In my app i have have a Cursor field and in the onStart() method of my Android Service I create it by fetching records from my database. When i look into my cursor in the onStart() method i find a number of records but when i try to use them in my trigger() method it has zero records. the field private Cursor c; in onStart() c = dbHelper.fetchAllRecords(); in trigger() c.getCount() returns null I didn't close the cursor earlier than in my onDestroy() method

  Read the article

• call setListAdapter() from inside a thread

  - by Mats Hofman

  Hi, I have a problem with my ListActivity, i use a thread to show a ProgressDialog where get a list of all installed applications. I turn it into a list adapter and than i want to set the listadapter of the activity but i can't do that from the thread. I get the following error: ERROR/AndroidRuntime(14429): android.view.ViewRoot$CalledFromWrongThreadException: Only the original thread that created a view hierarchy can touch its views. new Thread() { public void run() { showList(); // the method where i get all the apps and have the setListAdapter(); method progressDialog.dismiss(); } }.start(); How do I get it so I can use the setListAdapter from inside my thread

  Read the article

• I&rsquo;m speaking at Software Architect 2010 in October

  - by Eric Nelson

  I’m very pleased to report I have managed to slip past the quality police and get to speak for the third year in a row at the excellent Software Architect conference in London. Which makes it the only “long running” conference that I have a 100% record on speaking at year on year which gives it an extra special significance. How much longer before I am found out :) This conference attracts some great speakers including the likes of Kevlin Henney, Neal Ford and Tim Ewald (oh – and me). If you are a software/solution architect then I would definitely recommend you check out whether the sessions this year are something that would help you grow and make great technology/architecture choices in your organisation. I am delivering a brand new session - which means I need to create it :-) 10 things every architect needs to know about Windows Azure In this session we will look at the 10 most architecturally significant features of the Windows Azure platform which directly impact how you architect solutions if you plan to deploy in the Cloud. Maybe see you there…

  Read the article

• Customize Team Build 2010 – Part 11: Speed up opening my build process template

  In the series the following parts have been published Part 1: Introduction Part 2: Add arguments and variables Part 3: Use more complex arguments Part 4: Create your own activity Part 5: Increase AssemblyVersion Part 6: Use custom type for an argument Part 7: How is the custom assembly found Part 8: Send information to the build log Part 9: Impersonate activities (run under other credentials) Part 10: Include Version Number in the Build Number Part 11: Speed up opening my build process template Part 12: How to debug my custom activities Part 13: Get control over the Build Output Part 14: Execute a PowerShell script Part 15: Fail a build based on the exit code of a console application       When you open the build process template, it takes 15 – 30 seconds until it opens. When you are in the process of creating your custom build process template, this can be very frustrating. Thanks to Ed Blankenship how has found a little trick to speed up the opening of the template. It now only takes a few seconds. Create a file called empty.xaml and place the following text in it: <Activity http://www.edsquared.com/ct.ashx?id=1746c587-59ce-45eb-85af-8ea167862617&url=http%3a%2f%2fschemas.microsoft.com%2fnetfx%2f2009%2fxaml%2factivities"http://schemas.microsoft.com/netfx/2009/xaml/activities"> </Activity> Open this file in Visual Studio. In the toolbox panel, add a new tab called “Team Foundation Build Activities”.  Note that it is important to get the tab name correct because if it is not correct then the activities will be reloaded. Inside the new tab, right click and select “Choose Items” Click the Browse button Load the file C:\Windows\Microsoft.NET\assembly\GAC_MSIL\Microsoft.TeamFoundation.Build.Workflow\v4.0_10.0.0.0__b03f5f7f11d50a3a\Microsoft.TeamFoundation.Build.Workflow.dll Click OK to add the toolbox items to the tab. Create another new tab called “Team Foundation LabManagement Activities”. Inside the new tab, right click and select “Choose Items” Click the Browse button Load the file C:\Windows\Microsoft.NET\assembly\GAC_MSIL\Microsoft.TeamFoundation.Lab.Workflow.Activities\v4.0_10.0.0.0__b03f5f7f11d50a3a\Microsoft.TeamFoundation.Lab.Workflow.Activities.dll Click OK to add the toolbox items to the tab. You can download the full solution at BuildProcess.zip. It will include the sources of every part and will continue to evolve.

  Read the article

• Configure TFS portal afterwards

  Update #1 January 8th, 2010: There is an updated post on this topic for Beta 2: http://www.ewaldhofman.nl/post/2009/12/10/Configure-TFS-portal-afterwards-Beta-2.aspx Update #2 October 10th, 2010: In the new Team Foundation Server Power Tools September 2010, there is now a command to create a portal. tfpt addprojectportal   Add or move portal for an existing team project Usage: tfpt addprojectportal /collection:uri                              /teamproject:"project name"                              /processtemplate:"template name"                              [/webapplication:"webappname"]                              [/relativepath:"pathfromwebapp"]                              [/validate]                              [/verbose] /collection Required. URL of Team Project Collection. /teamproject Required. Specifies the name of the team project. /processtemplate Required. Specifies that name of the process template. /webapplication The name of the SharePoint Web Application. Must also specify relativepath. /relativepath The path for the site relative to the root URL for the SharePoint Web Application. Must also specify webapplication. /validate Specifies that the user inputs are to be validated. If specified, only validation will be done and no portal setting will be changed. /verbose Switches on the verbose mode. I created a new Team Project in TFS 2010 Beta 1 and choose not to configure SharePoint during the creation of the Team Project. Of course I found out fairly quickly that a portal for TFS is very useful, especially the Iteration and the Product backlog workbooks and the dashboard reports. This blog describes how you can configure the sharepoint portal afterwards. Update: September 9th, 2009 Adding the portal afterwards is much easier as described below. Here are the steps Step 1: Create a new temporary project (with a SharePoint site for it). Open the Team Explorer Right click in the Team Explorer the root node (i.e. the project collection) Select "New team project" from the menu Walk throught he wizard and make sure you check the option to create the portal (which is by default checked) Step 2: Disable the site for the new project Open the Team Explorer Select the team project you created in step 1 In the menu click on Team -> Show Project Portal. In the menu click on Team -> Team Project Settings -> Portal Settings... The following dialog pops up Uncheck the option "Enable team project portal" Confirm the dialog with OK Step 3: Enable the site for the original one. Point it to the newly created site. Open the Team Explorer Select the team project you want to add the portal to In the menu open Team -> Team Project Settings -> Portal Settings... The same dialog as in step 2 pops up Check the option "Enable team project portal" Click on the "Configure URL" button The following dialog pops up   In the dialog select in the combobox of the web application the TFS server Enter in the Relative site path the text "sites/[Project Collection Name]/[Team Project Name created in step 1]" Confirm the "Specify an existing SharePoint Site" with OK Check the "Reports and dashboards refer to data for this team project" option Confirm the dialog "Project Portal Settings" with OK Step 4: Delete the temporary project you created. In Beta 1, I have found no way to delete a team project. Maybe it will be available in TFS 2010 Beta 2. Original post Step 1: Create new portal site Go to the sharepoint site of your project collection (/sites//default.aspx">/sites//default.aspx">http://<servername>/sites/<project_collection_name>/default.aspx) Click on the Site Actions at the left side of the screen and choose the option Site Settings In the site settings, choose the Sites and workspaces option Create a new site Enter the values for the Title, the description, the site address. And choose for the TFS2010 Agile Dashboard as template. Create the site, by clicking on the Create button Step 2: Integrate portal site with team project Open Visual Studio Open the Team Explorer (View -> Team Explorer) Select in the Team Explorer tool window the Team Project for which you are create a new portal Open the Project Portal Settings (Team -> Team Project Settings -> Portal Setings...) Check the Enable team project portal checkbox Click on Configure URL... You will get a new dialog as below Enter the url to the TFS server in the web application combobox And specify the relative site path: sites/<project collection>/<site name> Confirm with OK Check in the Project Portal Settings dialog the checkbox "Reports and dashboards refer to data for this team project" Confirm the settings with OK (this takes a while...) When you now browse to the portal, you will see that the dashboards are now showing up with the data for the current team project. Step 3: Download process template To get a copy of the documents that are default in a team project, we need to have a fresh set of files that are not attached to a team project yet. You can do that with the following steps. Start the Process Template Manager (Team -> Team Project Collection Settings -> Process Template Manager...) Choose the Agile process template and click on download Choose a folder to download Step 4: Add Product and Iteration backlog Go to the Team Explorer in Visual Studio Make sure the team project is in the list of team projects, and expand the team project Right click the Documents node, and choose New Document Library Enter "Shared Documents", and click on Add Right click the Shared Documents node and choose Upload Document Go the the file location where you stored the process template from step 3 and then navigate to the subdirectory "Agile Process Template 5.0\MSF for Agile Software Development v5.0\Windows SharePoint Services\Shared Documents\Project Management" Select in the Open Dialog the files "Iteration Backlog" and "Product Backlog", and click Open Step 5: Bind Iteration backlog workbook to the team project Right click on the "Iteration Backlog" file and select Edit, and confirm any warning messages Place your cursor in cell A1 of the Iteration backlog worksheet Switch to the Team ribbon and click New List. Select your Team Project and click Connect From the New List dialog, select the Iteration Backlog query in the Workbook Queries folder. The final step is to add a set of document properties that allow the workbook to communicate with the TFS reporting warehouse. Before we create the properties we need to collect some information about your project. The first piece of information comes from the table created in the previous step.  As you collect these properties, copy them into notepad so they can be used in later steps. Property How to retrieve the value? [Table name] Switch to the Design ribbon and select the Table Name value in the Properties portion of the ribbon [Project GUID] In the Visual Studio Team Explorer, right click your Team Project and select Properties.  Select the URL value and copy the GUID (long value with lots of characters) at the end of the URL [Team Project name] In the Properties dialog, select the Name field and copy the value [TFS server name] In the Properties dialog, select the Server Name field and copy the value [UPDATE] I have found that this is not correct: you need to specify the instance of your SQL Server. The value is used to create a connection to the TFS cube. Switch back to the Iteration Backlog workbook. Click the Office button and select Prepare – Properties. Click the Document Properties – Server drop down and select Advanced Properties. Switch to the Custom tab and add the following properties using the values you collected above. Variable name Value [Table name]_ASServerName [TFS server name] [Table name]_ASDatabase tfs_warehouse [Table name]_TeamProjectName [Team Project name] [Table name]_TeamProjectId [Project GUID] Click OK to close the properties dialog. It is possible that the Estimated Work (Hours) is showing the #REF! value. To resolve that change the formula with: =SUMIFS([Table name][Original Estimate]; [Table name][Iteration Path];CurrentIteration&"*";[Table name][Area Path];AreaPath&"*";[Table name][Work Item Type]; "Task") For example =SUMIFS(VSTS_ab392b55_6647_439a_bae4_8c66e908bc0d[Original Estimate]; VSTS_ab392b55_6647_439a_bae4_8c66e908bc0d[Iteration Path];CurrentIteration&"*";VSTS_ab392b55_6647_439a_bae4_8c66e908bc0d[Area Path];AreaPath&"*";VSTS_ab392b55_6647_439a_bae4_8c66e908bc0d[Work Item Type]; "Task") Also the Total Remaining Work in the Individual Capacity table may contain #REF! values. To resolve that change the formula with: =SUMIFS([Table name][Remaining Work]; [Table name][Iteration Path];CurrentIteration&"*";[Table name][Area Path];AreaPath&"*";[Table name][Assigned To];[Team Member];[Table name][Work Item Type]; "Task") For example =SUMIFS(VSTS_ab392b55_6647_439a_bae4_8c66e908bc0d[Remaining Work]; VSTS_ab392b55_6647_439a_bae4_8c66e908bc0d[Iteration Path];CurrentIteration&"*";VSTS_ab392b55_6647_439a_bae4_8c66e908bc0d[Area Path];AreaPath&"*";VSTS_ab392b55_6647_439a_bae4_8c66e908bc0d[Assigned To];[Team Member];VSTS_ab392b55_6647_439a_bae4_8c66e908bc0d[Work Item Type]; "Task") Save and close the workbook. Step 6: Bind Product backlog workbook to the team project Repeat the steps for binding the Iteration backlog for thiw workbook too. In the worksheet Capacity, the formula of the Storypoints might be missing. You can resolve it with: =IF([Iteration]="";"";SUMIFS([Table name][Story Points];[Table name][Iteration Path];[Iteration]&"*")) Example =IF([Iteration]="";"";SUMIFS(VSTS_487f1e4c_db30_4302_b5e8_bd80195bc2ec[Story Points];VSTS_487f1e4c_db30_4302_b5e8_bd80195bc2ec[Iteration Path];[Iteration]&"*"))

  Read the article

• Programmatically use a server as the Build Server for multiple Project Collections

  Important: With this post you create an unsupported scenario by Microsoft. It will break your support for this server with Microsoft. So handle with care. I am the administrator an a TFS environment with a lot of Project Collections. In the supported configuration of Microsoft 2010 you need one Build Controller per Project Collection, and it is not supported to have multiple Build Controllers installed. Jim Lamb created a post how you can modify your system to change this behaviour. But since I have so many Project Collections, I automated this with the API of TFS. When you install a new build server via the UI, you do the following steps Register the build service (with this you hook the windows server into the build server environment) Add a new build controller Add a new build agent So in pseudo code, the code would look like foreach (projectCollection in GetAllProjectCollections) {       CreateNewWindowsService();       RegisterService();       AddNewController();       AddNewAgent(); } The following code fragements show you the most important parts of the method implementations. Attached is the full project. CreateNewWindowsService We create a new windows service with the SC command via the Diagnostics.Process class:             var pi = new ProcessStartInfo("sc.exe")                         {                             Arguments =                                 string.Format(                                     "create \"{0}\" start= auto binpath= \"C:\\Program Files\\Microsoft Team Foundation Server 2010\\Tools\\TfsBuildServiceHost.exe              /NamedInstance:{0}\" DisplayName= \"Visual Studio Team Foundation Build Service Host ({1})\"",                                     serviceHostName, tpcName)                         };            Process.Start(pi);             pi.Arguments = string.Format("failure {0} reset= 86400 actions= restart/60000", serviceHostName);            Process.Start(pi); RegisterService The trick in this method is that we set the NamedInstance static property. This property is Internal, so we need to set it through reflection. To get information on these you need nice Microsoft friends and the .Net reflector .             // Indicate which build service host instance we are using            typeof(BuildServiceHostUtilities).Assembly.GetType("Microsoft.TeamFoundation.Build.Config.BuildServiceHostProcess").InvokeMember("NamedInstance",              System.Reflection.BindingFlags.NonPublic | System.Reflection.BindingFlags.SetProperty | System.Reflection.BindingFlags.Static, null, null, new object[] { serviceName });             // Create the build service host            serviceHost = buildServer.CreateBuildServiceHost(serviceName, endPoint);            serviceHost.Save();             // Register the build service host            BuildServiceHostUtilities.Register(serviceHost, user, password); AddNewController and AddNewAgent Once you have the BuildServerHost, the rest is pretty straightforward. There are methods on the BuildServerHost to modify the controllers and the agents                 controller = serviceHost.CreateBuildController(controllerName);                 agent = controller.ServiceHost.CreateBuildAgent(agentName, buildDirectory, controller);                controller.AddBuildAgent(agent); You have now seen the highlights of the application. If you need it and want to have sample information when you work in this area, download the app TFS2010_RegisterBuildServerToTPCs

  Read the article

• Customize Team Build 2010 – Part 12: How to debug my custom activities

  In the series the following parts have been published Part 1: Introduction Part 2: Add arguments and variables Part 3: Use more complex arguments Part 4: Create your own activity Part 5: Increase AssemblyVersion Part 6: Use custom type for an argument Part 7: How is the custom assembly found Part 8: Send information to the build log Part 9: Impersonate activities (run under other credentials) Part 10: Include Version Number in the Build Number Part 11: Speed up opening my build process template Part 12: How to debug my custom activities Part 13: Get control over the Build Output Part 14: Execute a PowerShell script Part 15: Fail a build based on the exit code of a console application       Developers are “spoilt” persons who expect to be able to have easy debugging experiences for every technique they work with. So they also expect it when developing custom activities for the build process template. This post describes how you can debug your custom activities without having to develop on the build server itself. Remote debugging prerequisites The prerequisite for these steps are to install the Microsoft Visual Studio Remote Debugging Monitor. You can find information how to install this at http://msdn.microsoft.com/en-us/library/bt727f1t.aspx. I chose for the option to run the remote debugger on the build server from a file share. Debugging symbols prerequisites To be able to start the debugging, you need to have the pdb files on the buildserver together with the assembly. The pdb must have been build with Full Debug Info. Steps In my setup I have a development machine and a build server. To setup the remote debugging, I performed the following steps Locate on your development machine the folder C:\Program Files (x86)\Microsoft Visual Studio 10.0\Common7\IDE\Remote Debugger Create a share for the Remote Debugger folder. Make sure that the share (and the folder) has the correct permissions so the user on the build server has access to the share. On the build server go to the shared “Remote Debugger” folder Start msvsmon.exe which is located in the folder that represents the platform of the build server. This will open a winform application like   Go back to your development machine and open the BuildProcess solution. Start the Attach to process command (Ctrl+Alt+P) Type in the Qualifier the name of the build server. In my case the user account that has started the msvsmon is another user then the user on my development machine. In that case you have to type the qualifier in the format that is shown in the Remote Debugging Monitor (in my case LOCAL\Administrator@TFSLAB) and confirm it by pressing <Enter> Since the build service is running with other credentials, check the option “Show processes from all users”. Now the Attach to process dialog shows the TFSBuildServiceHost process Set the breakpoint in the activity you want to debug and kick of a build. Be aware that when you attach to the TFSBuildServiceHost that you debug every single build that is run by this windows service, so make sure you don’t debug the build server that is in production! You can download the full solution at BuildProcess.zip. It will include the sources of every part and will continue to evolve.

  Read the article

• When runs a product out of support?

  That is a question I get regularly from customers. Microsoft has a great site where you can find that information. Unfortunately this site is not easy to find, and a lot of people are not aware of this site. A good reason to promote it a little. So if you ever get a question on this topic, go to http://support.microsoft.com/lifecycle/search/Default.aspx. At that site, you can find also the details of the policy Microsoft Support Lifecycle Policy The Microsoft Support Lifecycle policy took effect in October 2002, and applies to most products currently available through retail purchase or volume licensing and most future release products. Through the policy, Microsoft will offer a minimum of: 10 years of support (5 years Mainstream Support and 5 years Extended Support) at the supported service pack level for Business and Developer products 5 years Mainstream Support at the supported service pack level for Consumer/Hardware/Multimedia products 3 years of Mainstream Support for products that are annually released (for example, Money, Encarta, Picture It!, and Streets & Trips) Phases of the Support Lifecycle Mainstream Support Mainstream Support is the first phase of the product support lifecycle. At the supported service pack level, Mainstream Support includes: Incident support (no-charge incident support, paid incident support, support charged on an hourly basis, support for warranty claims) Security update support The ability to request non-security hotfixes Please note: Enrollment in a maintenance program may be required to receive these benefits for certain products Extended Support The Extended Support phase follows Mainstream Support for Business and Developer products. At the supported service pack level, Extended Support includes: Paid support Security update support at no additional cost Non-security related hotfix support requires a separate Extended Hotfix Support Agreement to be purchased (per-fix fees also apply) Please note: Microsoft will not accept requests for warranty support, design changes, or new features during the Extended Support phase Extended Support is not available for Consumer, Hardware, or Multimedia products Enrollment in a maintenance program may be required to receive these benefits for certain products Self-Help Online Support Self-Help Online Support is available throughout a product's lifecycle and for a minimum of 12 months after the product reaches the end of its support. Microsoft online Knowledge Base articles, FAQs, troubleshooting tools, and other resources, are provided to help customers resolve common issues. Please note: Enrollment in a maintenance program may be required to receive these benefits for certain products (source: http://support.microsoft.com/lifecycle/#tab1)

  Read the article

• Make ‘Associate’ the default checkin action

  When you associate a work item to a checkin, the work item will be resolved by default. Some teams have work items that are bigger then one checkin (although this is not recommended) and don’t want to resolve the work items during a checkin. The only ways to modify the behaviour are: - Remove the default checkin action from the work item type. Downside is that it is not possible in the UI to choose resolve if you actually want to resolve the work item. - Change the Resolve action to associate.   In Visual Studio 2010 you can modify this behaviour by changing a registry setting. Change value the following key to “False”. HKEY_CURRENT_USER\Software\Microsoft\VisualStudio\10.0\TeamFoundation\SourceControl\Behavior @ResolveAsDefaultCheckinAction

  Read the article

• Customize Team Build 2010 – Part 13: Get control over the Build Output

  In the series the following parts have been published Part 1: Introduction Part 2: Add arguments and variables Part 3: Use more complex arguments Part 4: Create your own activity Part 5: Increase AssemblyVersion Part 6: Use custom type for an argument Part 7: How is the custom assembly found Part 8: Send information to the build log Part 9: Impersonate activities (run under other credentials) Part 10: Include Version Number in the Build Number Part 11: Speed up opening my build process template Part 12: How to debug my custom activities Part 13: Get control over the Build Output Part 14: Execute a PowerShell script Part 15: Fail a build based on the exit code of a console application In the part 8, I have explained how you can add informational messages, warnings or errors to the build output. If you want to integrate with other lines of text to the build output, you need to do more. This post will show you how you can add extra steps, additional information and hyperlinks to the build output. UPDATE 13-12-2010: Thanks to Jason Pricket, it is now also possible to not show every activity in the build log. This is really useful when you are doing for-loops in your template. To see how you can do that, check out Jason's blog: http://blogs.msdn.com/b/jpricket/archive/2010/12/09/tfs-2010-making-your-build-log-less-noisy.aspx Add an hyperlink to the end of the build output Lets start with a simple example of how you can adjust the build output. In this case we are going to add at the end of the build output an hyperlink where a user can click on to for example start the deployment to the test environment. In part 4 you can find information how you can create a custom activity To add information to the build output, you need the BuildDetail. This value is a variable in your xaml and is thus easily transferable to you custom activity. Besides the BuildDetail the user has also to specify the text and the url that has to be added to the end of the build output. The following code segment shows you how you can achieve this.     [BuildActivity(HostEnvironmentOption.All)]    public sealed class AddHyperlinkToBuildOutput : CodeActivity    {        [RequiredArgument]        public InArgument<IBuildDetail> BuildDetail { get; set; }         [RequiredArgument]        public InArgument<string> DisplayText { get; set; }         [RequiredArgument]        public InArgument<string> Url { get; set; }         protected override void Execute(CodeActivityContext context)        {            // Obtain the runtime value of the input arguments                        IBuildDetail buildDetail = context.GetValue(this.BuildDetail);            string displayText = context.GetValue(this.DisplayText);            string url = context.GetValue(this.Url);             // Add the hyperlink            buildDetail.Information.AddExternalLink(displayText, new Uri(url));            buildDetail.Information.Save();        }    } If you add this activity to somewhere in your build process template (within the scope Run on Agent), you will get the following build output Add an line of text to the build output The next challenge is to add this kind of output not only to the end of the build output but at the step that is currently executing. To be able to do this, you need the current node in the build output. The following code shows you how you can achieve this. First you need to get the current activity tracking, which you can get with the following line of code             IActivityTracking currentTracking = context.GetExtension<IBuildLoggingExtension>().GetActivityTracking(context); Then you can create a new node and set its type to Activity Tracking Node (so copy it from the current node) and do nice things with the node.             IBuildInformationNode childNode = currentTracking.Node.Children.CreateNode();            childNode.Type = currentTracking.Node.Type;            childNode.Fields.Add("DisplayText", "This text is displayed."); You can also add a build step to display progress             IBuildStep buildStep = childNode.Children.AddBuildStep("Custom Build Step", "This is my custom build step");            buildStep.FinishTime = DateTime.Now.AddSeconds(10);            buildStep.Status = BuildStepStatus.Succeeded; Or you can add an hyperlink to the node             childNode.Children.AddExternalLink("My link", new Uri(http://www.ewaldhofman.nl)); When you combine this together you get the following result in the build output   You can download the full solution at BuildProcess.zip. It will include the sources of every part and will continue to evolve.

  Read the article

• Customize Team Build 2010 – Part 13: Get control over the Build Output

  In the series the following parts have been published Part 1: Introduction Part 2: Add arguments and variables Part 3: Use more complex arguments Part 4: Create your own activity Part 5: Increase AssemblyVersion Part 6: Use custom type for an argument Part 7: How is the custom assembly found Part 8: Send information to the build log Part 9: Impersonate activities (run under other credentials) Part 10: Include Version Number in the Build Number Part 11: Speed up opening my build process template Part 12: How to debug my custom activities Part 13: Get control over the Build Output Part 14: Execute a PowerShell script Part 15: Fail a build based on the exit code of a console application     In the part 8, I have explained how you can add informational messages, warnings or errors to the build output. If you want to integrate with other lines of text to the build output, you need to do more. This post will show you how you can add extra steps, additional information and hyperlinks to the build output. Add an hyperlink to the end of the build output Lets start with a simple example of how you can adjust the build output. In this case we are going to add at the end of the build output an hyperlink where a user can click on to for example start the deployment to the test environment. In part 4 you can find information how you can create a custom activity To add information to the build output, you need the BuildDetail. This value is a variable in your xaml and is thus easily transferable to you custom activity. Besides the BuildDetail the user has also to specify the text and the url that has to be added to the end of the build output. The following code segment shows you how you can achieve this.     [BuildActivity(HostEnvironmentOption.All)]    public sealed class AddHyperlinkToBuildOutput : CodeActivity    {        [RequiredArgument]        public InArgument<IBuildDetail> BuildDetail { get; set; }         [RequiredArgument]        public InArgument<string> DisplayText { get; set; }         [RequiredArgument]        public InArgument<string> Url { get; set; }         protected override void Execute(CodeActivityContext context)        {            // Obtain the runtime value of the input arguments                        IBuildDetail buildDetail = context.GetValue(this.BuildDetail);            string displayText = context.GetValue(this.DisplayText);            string url = context.GetValue(this.Url);             // Add the hyperlink            buildDetail.Information.AddExternalLink(displayText, new Uri(url));            buildDetail.Information.Save();        }    } If you add this activity to somewhere in your build process template (within the scope Run on Agent), you will get the following build output Add an line of text to the build output The next challenge is to add this kind of output not only to the end of the build output but at the step that is currently executing. To be able to do this, you need the current node in the build output. The following code shows you how you can achieve this. First you need to get the current activity tracking, which you can get with the following line of code             IActivityTracking currentTracking = context.GetExtension<IBuildLoggingExtension>().GetActivityTracking(context); Then you can create a new node and set its type to Activity Tracking Node (so copy it from the current node) and do nice things with the node.             IBuildInformationNode childNode = currentTracking.Node.Children.CreateNode();            childNode.Type = currentTracking.Node.Type;            childNode.Fields.Add("DisplayText", "This text is displayed."); You can also add a build step to display progress             IBuildStep buildStep = childNode.Children.AddBuildStep("Custom Build Step", "This is my custom build step");            buildStep.FinishTime = DateTime.Now.AddSeconds(10);            buildStep.Status = BuildStepStatus.Succeeded; Or you can add an hyperlink to the node             childNode.Children.AddExternalLink("My link", new Uri(http://www.ewaldhofman.nl)); When you combine this together you get the following result in the build output     You can download the full solution at BuildProcess.zip. It will include the sources of every part and will continue to evolve.

  Read the article

• Part 14: Execute a PowerShell script

  In the series the following parts have been published Part 1: Introduction Part 2: Add arguments and variables Part 3: Use more complex arguments Part 4: Create your own activity Part 5: Increase AssemblyVersion Part 6: Use custom type for an argument Part 7: How is the custom assembly found Part 8: Send information to the build log Part 9: Impersonate activities (run under other credentials) Part 10: Include Version Number in the Build Number Part 11: Speed up opening my build process template Part 12: How to debug my custom activities Part 13: Get control over the Build Output Part 14: Execute a PowerShell script Part 15: Fail a build based on the exit code of a console application With PowerShell you can add powerful scripting to your build to for example execute a deployment. If you want more information on PowerShell, please refer to http://technet.microsoft.com/en-us/library/aa973757.aspx For this example we will create a simple PowerShell script that prints “Hello world!”. To create the script, create a new text file and name it “HelloWorld.ps1”. Add to the contents of the script: Write-Host “Hello World!” To test the script do the following: Open the command prompt To run the script you must change the execution policy. To do this execute in the command prompt: powershell set-executionpolicy remotesigned Now go to the directory where you have saved the PowerShell script Execute the following command powershell .\HelloWorld.ps1 In this example I use a relative path, but when the path to the PowerShell script contains spaces, you need to change the syntax to powershell "& '<full path to script>' " for example: powershell "& ‘C:\sources\Build Customization\SolutionToBuild\PowerShell Scripts\HellloWorld.ps1’ " In this blog post, I create a new solution and that solution includes also this PowerShell script. I want to create an argument on the Build Process Template that holds the path to the PowerShell script. In the Build Process Template I will add an InvokeProcess activity to execute the PowerShell command. This InvokeProcess activity needs the location of the script as an argument for the PowerShell command. Since you don’t know the full path at the build server of this script, you can either specify in the argument the relative path of the script, but it is hard to find out what the relative path is. I prefer to specify the location of the script in source control and then convert that server path to a local path. To do this conversion you can use the ConvertWorkspaceItem activity. So to complete the task, open the Build Process Template CustomTemplate.xaml that we created in earlier parts, follow the following steps Add a new argument called “DeploymentScript” and set the appropriate settings in the metadata. See Part 2: Add arguments and variables  for more information. Scroll down beneath the TryCatch activity called “Try Compile, Test, and Associate Changesets and Work Items” Add a new If activity and set the condition to "Not String.IsNullOrEmpty(DeploymentScript)" to ensure it will only run when the argument is passed. Add in the Then branch of the If activity a new Sequence activity and rename it to “Start deployment” Click on the activity and add a new variable called DeploymentScriptFilename (scoped to the “Start deployment” Sequence Add a ConvertWorkspaceItem activity on the “Start deployment” Sequence Add a InvokeProcess activity beneath the ConvertWorkspaceItem activity in the “Start deployment” Sequence Click on the ConvertWorkspaceItem activity and change the properties DisplayName = Convert deployment script filename Input = DeploymentScript Result = DeploymentScriptFilename Workspace = Workspace Click on the InvokeProcess activity and change the properties Arguments = String.Format(" ""& '{0}' "" ", DeploymentScriptFilename) DisplayName = Execute deployment script FileName = "PowerShell" To see results from the powershell command drop a WriteBuildMessage activity on the "Handle Standard Output" and pass the stdOutput variable to the Message property. Do the same for a WriteBuildError activity on the "Handle Error Output" To publish it, check in the Build Process Template This leads to the following result We now go to the build definition that depends on the template and set the path of the deployment script to the server path to the HelloWorld.ps1. (If you want to see the result of the PowerShell script, change the Logging verbosity to Detailed or Diagnostic). Save and run the build. A lot of the deployment scripts you have will have some kind of arguments (like username / password or environment variables) that you want to define in the Build Definition. To make the PowerShell configurable, you can follow the following steps. Create a new script and give it the name "HelloWho.ps1". In the contents of the file add the following lines: param (         $person     ) $message = [System.String]::Format(“Hello {0}!", $person) Write-Host $message When you now run the script on the command prompt, you will see the following So lets change the Build Process Template to accept one parameter for the deployment script. You can of course make it configurable to add a for-loop that reads through a collection of parameters but that is out of scope of this blog post. Add a new Argument called DeploymentScriptParameter In the InvokeProcess activity where the PowerShell command is executed, modify the Arguments property to String.Format(" ""& '{0}' '{1}' "" ", DeploymentScriptFilename, DeploymentScriptParameter) Check in the Build Process Template Now modify the build definition and set the Parameter of the deployment to any value and run the build. You can download the full solution at BuildProcess.zip. It will include the sources of every part and will continue to evolve.

  Read the article

• Search files blazing fast

  If you know there is a file somewhere on your machine, but you cannot find it with the default Windows Search Tools (that why they tend to call it Windows Search and not Windows Find ) then switch to a tool that really works. Go to http://www.voidtools.com/ to download your copy of Everything. The download is only small (350KB), it indexes fast (within 5 mins) and searches my complete computer even faster then I can type. I only blame David Carpenter for not spreading the word more aggressively and for not developing this earlier.

  Read the article

• Customize Team Build 2010 – Part 16: Specify the relative reference path

  In the series the following parts have been published Part 1: Introduction Part 2: Add arguments and variables Part 3: Use more complex arguments Part 4: Create your own activity Part 5: Increase AssemblyVersion Part 6: Use custom type for an argument Part 7: How is the custom assembly found Part 8: Send information to the build log Part 9: Impersonate activities (run under other credentials) Part 10: Include Version Number in the Build Number Part 11: Speed up opening my build process template Part 12: How to debug my custom activities Part 13: Get control over the Build Output Part 14: Execute a PowerShell script Part 15: Fail a build based on the exit code of a console application Part 16: Specify the relative reference path As I have already blogged about, it is not intuitive how to specify the paths where the build server has to look for references that are stored in Source Control. It is a common practice to store 3rd party libraries in Source Control, so they are available to everyone, everyone uses the same version of the libraries and updating a library can be done centrally. In Team Build 2010 these paths are specified as a parameter for MSBuild. What we will do in this post is building the values for this parameter based on the values in an argument. You are now pretty aware how to customize the build template, so let’s do the modifications in another way. Instead of opening the xaml file in the workflow designer, we open it in the XML editor. You can open it in the XML Editor by either selecting the Open with menu (see the context menu), or by choosing the View code option. To add this functionality we need to: Specify a new argument Add the argument to the metadata Build the absolute paths for the references and add these paths to the MSBuild arguments 1. Specify a new argument Locate at the top of the document the Members (which are the arguments) of the XAML and add the following line <x:Property Name="ReferencePaths" Type="InArgument(s:String[])" /> 2. Add the argument to the metadata Then locate the line <mtbw:ProcessParameterMetadataCollection> and paste the following line <mtbw:ProcessParameterMetadata Category="Misc" Description="The list of reference paths, relative to the root path in the Workspace mapping." DisplayName="Reference paths" ParameterName="ReferencePaths" /> 3. Build the absolute paths for the references and add these paths to the MSBuild arguments Now locate the place where the assignments are done to the variables used in the agent. And add the following lines after the last Assign activity         <Sequence DisplayName="Initialize ReferencePath" sap:VirtualizedContainerService.HintSize="464,428">           <Sequence.Variables>             <Variable x:TypeArguments="x:String" Name="ReferencePathsArgument">               <Variable.Default>                 <Literal x:TypeArguments="x:String" Value="" />               </Variable.Default>             </Variable>           </Sequence.Variables>           <sap:WorkflowViewStateService.ViewState>             <scg:Dictionary x:TypeArguments="x:String, x:Object">               <x:Boolean x:Key="IsExpanded">True</x:Boolean>             </scg:Dictionary>           </sap:WorkflowViewStateService.ViewState>           <ForEach x:TypeArguments="x:String" DisplayName="Iterate through the paths" sap:VirtualizedContainerService.HintSize="287,206" mtbwt:BuildTrackingParticipant.Importance="Low" Values="[ReferencePaths]">             <ActivityAction x:TypeArguments="x:String">               <ActivityAction.Argument>                 <DelegateInArgument x:TypeArguments="x:String" Name="path" />               </ActivityAction.Argument>               <Assign x:TypeArguments="x:String" DisplayName="Build ReferencePath argument" sap:VirtualizedContainerService.HintSize="257,100" mtbwt:BuildTrackingParticipant.Importance="Low"  To="[ReferencePathsArgument]" Value="[If(String.IsNullOrEmpty(ReferencePathsArgument), &quot;&quot;, ReferencePathsArgument + &quot;;&quot;) + IO.Path.Combine(SourcesDirectory, path)]" />             </ActivityAction>           </ForEach>           <Assign DisplayName="Append the reference paths to the MSBuild Arguments" sap:VirtualizedContainerService.HintSize="287,58">             <Assign.To>               <OutArgument x:TypeArguments="x:String">[MSBuildArguments]</OutArgument>             </Assign.To>             <Assign.Value>               <InArgument x:TypeArguments="x:String">[String.Format("{0} /p:ReferencePath=""{1}""", MSBuildArguments, ReferencePathsArgument)]</InArgument>             </Assign.Value>           </Assign>         </Sequence> Now you can use the template to specify the paths relative to SourcesDirectory. You can download the full solution at BuildProcess.zip. It will include the sources of every part and will continue to evolve.

  Read the article

• SqlBuildTask failed due to ArgumentNullException(searchingPaths)

  At one of my customers, they have setup TFS 2010. They are using the UpgradeTemplate.xaml to build all their solutions, including GDR2 database projects. When building the project, I got the following error message DspBuild:   Creating a model to represent the project... C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v9.0\TeamData\Microsoft.Data.Schema.SqlTasks.targets(58,5): error MSB4018: The "SqlBuildTask" task failed unexpectedly. [C:\Builds\9\62\Sources\MyDb\MyDb.dbproj] C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v9.0\TeamData\Microsoft.Data.Schema.SqlTasks.targets(58,5): error MSB4018: System.ArgumentNullException: Value cannot be null. [C:\Builds\9\62\Sources\MyDb\MyDb.dbproj] C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v9.0\TeamData\Microsoft.Data.Schema.SqlTasks.targets(58,5): error MSB4018: Parameter name: searchingPaths [C:\Builds\9\62\Sources\MyDb\MyDb.dbproj] C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v9.0\TeamData\Microsoft.Data.Schema.SqlTasks.targets(58,5): error MSB4018:    at Microsoft.Data.Schema.Extensibility.ExtensionAssemblyResolver..ctor(List`1 searchingPaths) [C:\Builds\9\62\Sources\MyDb\MyDb.dbproj] C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v9.0\TeamData\Microsoft.Data.Schema.SqlTasks.targets(58,5): error MSB4018:    at Microsoft.Data.Schema.Extensibility.ExtensionTypeLoader.LoadTypes() [C:\Builds\9\62\Sources\MyDb\MyDb.dbproj] C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v9.0\TeamData\Microsoft.Data.Schema.SqlTasks.targets(58,5): error MSB4018:    at Microsoft.Data.Schema.Extensibility.ExtensionManager..ctor(String databaseSchemaProviderType) [C:\Builds\9\62\Sources\MyDb\MyDb.dbproj] C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v9.0\TeamData\Microsoft.Data.Schema.SqlTasks.targets(58,5): error MSB4018:    at Microsoft.Data.Schema.Tasks.TaskHostLoader.LoadImpl(ITaskHost providedHost, TaskLoggingHelper providedLogger) [C:\Builds\9\62\Sources\MyDb\MyDb.dbproj] C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v9.0\TeamData\Microsoft.Data.Schema.SqlTasks.targets(58,5): error MSB4018:    at Microsoft.Data.Schema.Tasks.TaskHostLoader.Load(ITaskHost providedHost, TaskLoggingHelper providedLogger) [C:\Builds\9\62\Sources\MyDb\MyDb.dbproj] C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v9.0\TeamData\Microsoft.Data.Schema.SqlTasks.targets(58,5): error MSB4018:    at Microsoft.Data.Schema.Tasks.DBBuildTask.Execute() [C:\Builds\9\62\Sources\MyDb\MyDb.dbproj] C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v9.0\TeamData\Microsoft.Data.Schema.SqlTasks.targets(58,5): error MSB4018:    at Microsoft.Build.BackEnd.TaskExecutionHost.Microsoft.Build.BackEnd.ITaskExecutionHost.Execute() [C:\Builds\9\62\Sources\MyDb\MyDb.dbproj] C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v9.0\TeamData\Microsoft.Data.Schema.SqlTasks.targets(58,5): error MSB4018:    at Microsoft.Build.BackEnd.TaskBuilder.ExecuteInstantiatedTask(ITaskExecutionHost taskExecutionHost, TaskLoggingContext taskLoggingContext, TaskHost taskHost, ItemBucket bucket, TaskExecutionMode howToExecuteTask, Boolean& taskResult) [C:\Builds\9\62\Sources\MyDb\MyDb.dbproj] Solution To solve this error you set the MSBuild Platform in the Build Defintion to X86:

  Read the article

• Dutch Techdays 2011 in The Hague

  Microsoft organizes at April 27, 28 and 29 the Dutch Techdays in The Hague. Already for 14 years this is the biggest Microsoft event in The Netherlands where you get the chance to get up to speed with the latest technology with speakers all over the world. I have the pleasure to provide you with two sessions this year: At the DevDays Pre-conference four ALM experts from the Dutch region help you understand how to adopt and improve your agile practices for greater productivity and higher quality applications. The topics for the day are: Adopting SCRUM Improve the developer workflow Adopting Continous Integration Agile testing My second session, LAB Management in de Praktijk , is about one of the features in Visual Studio ALM a lot of people are not aware of, which is called Lab Management. In the Dutch edition of the .NET magazine, I already gave the first sneak peak into the product. In the session I will dive deeper in the product and show you how you can create your templates and your test environments. I also show you how you can execute the tests on these environments and how you can incorporate it in Team Build. As a speaker you have the advantage to attend other sessions as well. The sessions I really look forward to are: Entity Framework in de Praktijk (Pieter de Bruin) Introduction to Visual Studio Lightswitch (Beth Massi) Building Robust, Maintainable Coded UI Tests with Visual Studio 2010 (Brian Keller) CQRS op Windows Azure (Tijmen van de Kamp) Using SharePoint Search to Develop Custom Solutions (Mirjam van Olst) Application Performance on Windows Phone 7 (Caspar Ruhe) Have fun at the Techdays, and hopefully we have a chance to meet each other.

  Read the article

• Part 15: Fail a build based on the exit code of a console application

  In the series the following parts have been published Part 1: Introduction Part 2: Add arguments and variables Part 3: Use more complex arguments Part 4: Create your own activity Part 5: Increase AssemblyVersion Part 6: Use custom type for an argument Part 7: How is the custom assembly found Part 8: Send information to the build log Part 9: Impersonate activities (run under other credentials) Part 10: Include Version Number in the Build Number Part 11: Speed up opening my build process template Part 12: How to debug my custom activities Part 13: Get control over the Build Output Part 14: Execute a PowerShell script Part 15: Fail a build based on the exit code of a console application When you have a Console Application or a batch file that has errors, the exitcode is set to another value then 0. You would expect that the build would see this and report an error. This is not true however. First we setup the scenario. Add a ConsoleApplication project to your solution you are building. In the Main function set the ExitCode to 1     class Program    {        static void Main(string[] args)        {            Console.WriteLine("This is an error in the script.");            Environment.ExitCode = 1;        }    } Checkin the code. You can choose to include this Console Application in the build or you can decide to add the exe to source control Now modify the Build Process Template CustomTemplate.xaml Add an argument ErrornousScript Scroll down beneath the TryCatch activity called “Try Compile, Test, and Associate Changesets and Work Items” Add an Sequence activity to the template In the Sequence, add a ConvertWorkspaceItem and an InvokeProcess activity (see Part 14: Execute a PowerShell script  for more detailed steps) In the FileName property of the InvokeProcess use the ErrornousScript so the ConsoleApplication will be called. Modify the build definition and make sure that the ErrornousScript is executing the exe that is setting the ExitCode to 1. You have now setup a build definition that will execute the errornous Console Application. When you run it, you will see that the build succeeds. This is not what you want! To solve this, you can make use of the Result property on the InvokeProcess activity. So lets change our Build Process Template. Add the new variables (scoped to the sequence where you run the Console Application) called ExitCode (type = Int32) and ErrorMessage Click on the InvokeProcess activity and change the Result property to ExitCode In the Handle Standard Output of the InvokeProcess add a Sequence activity In the Sequence activity, add an Assign primitive. Set the following properties: To = ErrorMessage Value = If(Not String.IsNullOrEmpty(ErrorMessage), Environment.NewLine + ErrorMessage, "") + stdOutput And add the default BuildMessage to the sequence that outputs the stdOutput Add beneath the InvokeProcess activity and If activity with the condition ExitCode <> 0 In the Then section add a Throw activity and set the Exception property to New Exception(ErrorMessage) The complete workflow looks now like When you now check in the Build Process Template and run the build, you get the following result And that is exactly what we want.   You can download the full solution at BuildProcess.zip. It will include the sources of every part and will continue to evolve.

  Read the article

• XNA Notes 011

  - by George Clingerman

  Even with a lot of the XNA community working on Dream Build Play entries ( I swear I’m going to finish mine this year!) people are still finding time to do side projects and be amazingly active in the XNA and XBLIG community. With my one eye on my code and one eye on the community, here’s what I noticed these over achievers doing this past week! Time Critical XNA News: Xbox LIVE Indie Games sales data will be delayed March 17-20th due to some schedule maintenance http://create.msdn.com/en-us/news/indie_games_data_delay_march2011 GameMarx is releasing a series of videos to help raise donations for victims of the earthquakes and tsunami in Japan. Help out if you can! http://www.gamemarx.com/video/special/29/help-japan-sushido.aspx XNA MVPs: Catalin Zima shares his thoughts on the MVP summit and my book! http://www.catalinzima.com/2011/03/mvp-summit-2011/ Glenn Wilson (@mykre) helps the XNA team announce some new educational content that you don’t want to miss if you’re porting your app or game to Windows Phone 7 http://www.virtualrealm.com.au/Blog/tabid/62/EntryId/653/Porting-your-App-or-Game-to-Windows-Phone-7.aspx and Windows Phone 7 from scratch http://www.virtualrealm.com.au/Blog/tabid/62/EntryId/654/Windows-Phone-from-Scratch.aspx and shares a link to some free architectural models and textures http://twitter.com/#!/Mykre/status/46410160784158720 George (that’s me!) shares his MVP Summit 2011 summary and XBLIG thoughts http://geekswithblogs.net/clingermangw/archive/2011/03/15/144366.aspx XNA Developers: @SmallCaveGames shares a Code of Ethics for Xbox LIVE Indie Game Developers http://smallcavegames.blogspot.com/2011/03/unofficial-xblig-developers-code-of.html Derek S adds more Xbox LIVE Indie Game studios to his master list of XBLIG links http://twitter.com/#!/Mr_Deeke/status/46140996056125440 http://xbl-indieverse.blogspot.com/p/xblig-links.html Making games and want to help kids? Then share your story with GameFace: America! http://gameitupinitiative.com/about-the-initiative/programs/gameface-america/ Xbox LIVE Indie Games (XBLIG): XonaGames shares some video footage of their booth from GDC 2011 Video 1: http://youtu.be/lxIV9nk3Gq4 Video 2: http://youtu.be/GgfrjqkxR_o Video 3: http://youtu.be/yVcpXrTX7SQ Joystiq on Mommy’s Best Games Serious Sam Double D http://www.joystiq.com/2011/03/16/the-most-important-thing-about-serious-sam-double-d/ And The Escapist recommends that gamers start learning to avoid cleavage now http://www.escapistmagazine.com/news/view/108543-Boobie-Bomber-Makes-First-Appearance-in-Serious-Sam-Double-D Magiko Gaming started a blog on the XBLIG dashboard daily Top 10 games in the US. Good way to go back in time and look at the history of which games were in the the Top 10. http://dailytop10indiegames.wordpress.com/ Where are they going now? XBLIG developers at a crossroads.. http://www.gamesetwatch.com/2011/03/where_are_they_going_now_xblig.php http://www.gamasutra.com/view/news/33527/InDepth_Where_Are_They_Going_Now_XBLIG_Developers_At_A_Crossroads_.php BinaryTweed’s Clover: A Curious Tail is Xbox LIVE’s Deal of the Week! http://www.armlessoctopus.com/2011/03/15/what-luck-clover-a-curious-tale-is-half-price-this-week/ Looking for an Xbox LIVE Indie Game to buy? Writings of Mass Deduction has over 125 suggestions at this point! http://writingsofmassdeduction.com/ SkaStudios shares Vampire Smile Achievements AND their PAX East 2011 Both Setup video http://www.ska-studios.com/2011/03/14/vampire-smile-achievement/ http://www.ska-studios.com/2011/03/15/pax-booth-setup-time-lapse/ MasterBlud and VVGTV starts a new community for XBLIG developers and gamers to join http://vvgtv.forumotion.com/ Raymond Matthews (@DrakstarMatryx) covers Mommy’s Best Games getting Serious http://www.darkstarmatryx.com/?p=286 XNA Development: Dave Henry (@mort8088) posts the 4th tutorial in his series XNA 4.0 SpriteBatch extended http://mort8088.com/2011/03/11/xna-4-0-tutorial-4-spritebatch-extended/ Tutorial 5 - Creating a manual blank texture http://mort8088.com/2011/03/13/xna-4-tutorial-5-manual-blank-texture/ XNA 4.0 Tutorial 6 - Spritesheet Object http://mort8088.com/2011/03/18/xna-4-0-tutorial-6-spritesheet-object/ Jason Mitchell shares a tutorial on setting the alpha value for spritebatch in XNA 4.0 http://www.jason-mitchell.com/index.php/2011/03/13/setting-alpha-value-for-spritebatch-draw-in-xna-4/ XNA for Silverlight Developers: Part 7 - Collision Detection http://www.silverlightshow.net/items/XNA-for-Silverlight-developers-Part-7-Collision-detection.aspx Markus Ewald (@Cygon4) shares the full Ninject 2.0 binding for XNA and Sunburn http://twitter.com/#!/Cygon4/status/48330203826622464 Michael B. McLaughlin shares an AccelerometerInput XNA GameComponent he created (which I’m probably going to snag for a game I’m working on...) http://geekswithblogs.net/mikebmcl/archive/2011/03/17/accelerometerinput-xna-gamecomponent.aspx Extra Credit tackles the building of a good tutorial. Must watch for all Indie game devs (thanks for pointing it out Evan Johnson!) http://twitter.com/#!/johnsonevan/status/48452115680604160 http://www.escapistmagazine.com/videos/view/extra-credits/2921-Tutorials-101 ExEn is fully funded at this point so definitely something for XBLIG developers to keep an eye on as they consider releasing their games on other platforms http://rockethub.com/projects/752-exen-xna-for-iphone-android-and-silverlight Channel 9 and Greg Duncan post Mixing the Game State Management and Platformer XNA Recipes http://channel9.msdn.com/coding4fun/blog/Mixing-the-Game-State-Management-and-Platformer-XNA-Recipes Sgt. Conker has noticed Mike McLaughlin has been crazy productive and has done a recap of his recent posts http://www.sgtconker.com/2011/03/recap-of-mikebmcls-posts/

  Read the article

1