Search Results

Search found 27 results on 2 pages for 'graviton'.

Page 1/2 | 1 2  | Next Page >

• Linux pptp client stops working after several hours

  - by Aron Rotteveel

  Here's the situation: Setup: 1 Windows Server 2008 machine acting as a Domain Controller and RRAS server 1 CentOS machine in a datacentre located elsewhere PPTP client running on CentOS machine, connected to the DC via When I connect to the DC, everything is working fine. I have set up a static IP for the dialup connection in my RRAS server so that the CentOS machine is automatically assigned the IP 192.168.1.240. Inside the VPN, it is not possible to access this machine on the local IP-address. Perfect. However, after several hours, it simply seems to stop working (IE: I cannot ping to or from this machine on the local network). The strange thing is, however: The DC shows the VPN client as still being connected The CentOS machine shows the network interface as being up There are no entries in my /var/log/messages that indicate a problem Output from ifconfig: ppp0 Link encap:Point-to-Point Protocol inet addr:192.168.1.240 P-t-P:192.168.1.160 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1396 Metric:1 RX packets:43 errors:0 dropped:0 overruns:0 frame:0 TX packets:58 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:3 RX bytes:4511 (4.4 KiB) TX bytes:15071 (14.7 KiB) Output from route -n: 192.168.1.160 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 ppp0 I have the following in my ip-up.local: route add -net 192.168.1.0 netmask 255.255.255.0 dev ppp0 The situation can be easily fixed by issueing a killall pppd and re-connecting. However, I obviously do not want to do this every X-hours or so. I have tried running pppd with both the debug as the kdebug flag but cannot find the cause of this problem. Currently, my ppp0 network interface seems to be running and the last log lines mentioning it are: Feb 19 14:10:40 graviton pppd[10934]: local IP address 192.168.1.240 Feb 19 14:10:40 graviton pppd[10934]: remote IP address 192.168.1.160 Feb 19 14:10:40 graviton pppd[10934]: Script /etc/ppp/ip-up started (pid 10952) Feb 19 14:10:40 graviton pppd[10934]: Script /etc/ppp/ip-up finished (pid 10952), status = 0x0 Feb 19 14:11:27 graviton pptp[10935]: anon log[decaps_gre:pptp_gre.c:414]: buffering packet 190 (expecting 189, lost or reordered) Feb 19 14:11:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Request received. Feb 19 14:11:37 graviton pptp[10942]: anon log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 6 'Echo-Reply' Feb 19 14:12:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Request received. Feb 19 14:12:37 graviton pptp[10942]: anon log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 6 'Echo-Reply' Feb 19 14:12:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Reply received. Feb 19 14:13:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Reply received. Feb 19 14:14:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Reply received. Feb 19 14:15:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Reply received. Feb 19 14:16:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Reply received. Feb 19 14:19:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Reply received. Feb 19 14:19:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:679]: no more Echo Reply/Request packets will be reported. I have enabled the persist option. The network interface is still running, but it is still impossible to send data through the VPN. Any help is appreciated.

  Read the article

• Linux networking crash: best steps to find out the cause?

  - by Aron Rotteveel

  One of our Linux (CentOS) servers was unreachable last night. The server was not reachable in any way except for the remote console. After logging in with the remote console, it turned out I could not ping any outside hosts either. A simple service network restart solved the issue, but I am still wondering what could have caused this. My log files seem to indicate no error at all (except for the various daemons that need a network connection and failed after the network failure). Are there any additional steps I can take to find out the cause of this problem? EDIT: this just happened again. The server was completely unresponsive until I issued a networking service restart. Any advise is welcome. Could this be caused by a faulty hardware component? As per Madhatters request, here are some excerpts from the log at the time (the network crashed at 20:13): /var/log/messages: Dec 2 20:01:05 graviton kernel: Firewall: *TCP_IN Blocked* IN=eth0 OUT= MAC=<stripped> SRC=<stripped> DST=<stripped> LEN=40 TOS=0x00 PREC=0x00 TTL=101 ID=256 PROTO=TCP SPT=6000 DPT=3306 WINDOW=16384 RES=0x00 SYN URGP=0 Dec 2 20:01:05 graviton kernel: Firewall: *TCP_IN Blocked* IN=eth0 OUT= MAC=<stripped> SRC=<stripped> DST=<stripped> LEN=40 TOS=0x00 PREC=0x00 TTL=100 ID=256 PROTO=TCP SPT=6000 DPT=3306 WINDOW=16384 RES=0x00 SYN URGP=0 Dec 2 20:01:05 graviton kernel: Firewall: *TCP_IN Blocked* IN=eth0 OUT= MAC=<stripped> SRC=<stripped> DST=<stripped> LEN=40 TOS=0x00 PREC=0x00 TTL=101 ID=256 PROTO=TCP SPT=6000 DPT=3306 WINDOW=16384 RES=0x00 SYN URGP=0 Dec 2 20:13:34 graviton junglediskserver: Connection to gateway failed: xGatewayTransport - Connection to gateway failed. The first three messages are simple responses to iptables rules I have set up through the LFD firewall. The last message indicates that JungleDisk, which I use for backups can no longer connect to the gateway. Apart from this, there are no interesting messages around this time. EDIT 4 dec: as per Mattdm's request, here is the output of ethtool eth0: (Please not that these are the settings that currently work. If things go wrong again, I will be sure to post this again if necessary. Settings for eth0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised auto-negotiation: Yes Speed: 1000Mb/s Duplex: Full Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: on Supports Wake-on: g Wake-on: d Link detected: yes As per Joris' request, here is also the output of route -n: aron@graviton [~]# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface xx.xx.xx.58 0.0.0.0 255.255.255.255 UH 0 0 0 eth0 xx.xx.xx.42 0.0.0.0 255.255.255.255 UH 0 0 0 eth0 xx.xx.xx.43 0.0.0.0 255.255.255.255 UH 0 0 0 eth0 xx.xx.xx.41 0.0.0.0 255.255.255.255 UH 0 0 0 eth0 xx.xx.xx.46 0.0.0.0 255.255.255.255 UH 0 0 0 eth0 xx.xx.xx.47 0.0.0.0 255.255.255.255 UH 0 0 0 eth0 xx.xx.xx.44 0.0.0.0 255.255.255.255 UH 0 0 0 eth0 xx.xx.xx.45 0.0.0.0 255.255.255.255 UH 0 0 0 eth0 xx.xx.xx.50 0.0.0.0 255.255.255.255 UH 0 0 0 eth0 xx.xx.xx.51 0.0.0.0 255.255.255.255 UH 0 0 0 eth0 xx.xx.xx.48 0.0.0.0 255.255.255.255 UH 0 0 0 eth0 xx.xx.xx.49 0.0.0.0 255.255.255.255 UH 0 0 0 eth0 xx.xx.xx.54 0.0.0.0 255.255.255.255 UH 0 0 0 eth0 xx.xx.xx.52 0.0.0.0 255.255.255.255 UH 0 0 0 eth0 xx.xx.xx.53 0.0.0.0 255.255.255.255 UH 0 0 0 eth0 xx.xx.xx.0 0.0.0.0 255.255.255.192 U 0 0 0 eth0 xx.xx.xx.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 0.0.0.0 xx.xx.xx.62 0.0.0.0 UG 0 0 0 eth0 The bottom xx.62 is my gateway. EDIT december 28th: the problem occurred again and I got the chance to compare some of the outputs of the above tests. What I found out is that arp -an returns an incomplete MAC address for my gateway (which is not under my control; the server is in a shared rack): During failure: ? (xx.xx.xx.62) at <incomplete> on eth0 After service network restart: ? (xx.xx.xx.62) at 00:00:0C:9F:F0:30 [ether] on eth0 Is this something I can fix or is it time for me to contact the data centre?

  Read the article

• How to Make Sure your Company Don't Go Underwater if Your Programmers are Hit by Bus

  - by Graviton

  I have a few programmers under me, they are all doing very great and very smart obviously. Thank you very much. But the problem is that each and every one of them is responsible for one core area, which no one else on the team have foggiest idea on what it is. This means that if anyone of them is taken out, my company as a business is dead because they aren't replaceable. I'm thinking about bringing in new programmers to cover them, just in case they are hit by a bus, or resign or whatever. But I afraid that The old programmers might actively resist the idea of knowledge transfer, fearing that a backup might reduce their value. I don't have a system to facilitate technology transfer between different developers, so even if I ask them to do it, I've no assurance that they will do it properly. My question is, How to put it to the old programmers in such they would agree What are systems that you use, in order to facilitate this kind of "backup"? I can understand that you can do code review, but is there a simple way to conduct this? I think we are not ready for a full blown, check-in by check-in code review.

  Read the article

• How to Make Sure Your Company Doesn't Go Underwater If Your Programmers Win the Lottery

  - by Graviton

  I have a few programmers under me, they are all doing very great and very smart obviously. Thank you very much. But the problem is that each and every one of them is responsible for one core area, which no one else on the team have foggiest idea on what it is. This means that if anyone of them is taken out, my company as a business is dead because they aren't replaceable. I'm thinking about bringing in new programmers to cover them, just in case they are hit by a bus, or resign or whatever. But I afraid that The old programmers might actively resist the idea of knowledge transfer, fearing that a backup might reduce their value. I don't have a system to facilitate technology transfer between different developers, so even if I ask them to do it, I've no assurance that they will do it properly. My question is, How to put it to the old programmers in such they would agree What are systems that you use, in order to facilitate this kind of "backup"? I can understand that you can do code review, but is there a simple way to conduct this? I think we are not ready for a full blown, check-in by check-in code review.

  Read the article

• How should code reviews be Carried Out?

  - by Graviton

  My previous question has to do with how to advance code reviews among the developers. Here I am interested in how a code review session should be carried out, so that both the reviewer and reviewed are feeling comfortable with it. I have done some code reviews before and the experience has been very unpleasant. My previous manager would come to us --on an ad hoc basis-- and tell us to explain our code to him. Since he wasn't very familiar with the code base, whenever he would ask me to explain my code, I'd find myself spending a huge amount of time explaining the most basic structure of my code. As a result, each review would last much too long, and the process would leave both of us exhausted. Once I was done explaining my work, he would continue by raising issues with it. Most of the issues he raised were cosmetic in nature ( e.g, don't use region for this code block, change the variable name from xxx to yyy even though the later makes even less sense, and so on). After trying this process for few rounds, we found the review session didn't derive much benefits for either of us, and we stopped. How would you go about making each code review a natural, enjoyable, thought stimulating, bug-fixing and mutual-learning experience? Also, how frequently you do your code reviews - as soon as the code is checked in? Do you allocate a fixed time every week to do this? What are the guidelines that you follow during your code reviews?

  Read the article

• How to Make Sure Your Company Doesn't Go Underwater If Your Programmers Are Hit by a Bus

  - by Graviton

  I have a few programmers under me, they are all doing very great and very smart obviously. Thank you very much. But the problem is that each and every one of them is responsible for one core area, which no one else on the team have foggiest idea on what it is. This means that if anyone of them is taken out, my company as a business is dead because they aren't replaceable. I'm thinking about bringing in new programmers to cover them, just in case they are hit by a bus, or resign or whatever. But I afraid that The old programmers might actively resist the idea of knowledge transfer, fearing that a backup might reduce their value. I don't have a system to facilitate technology transfer between different developers, so even if I ask them to do it, I've no assurance that they will do it properly. My question is, How to put it to the old programmers in such they would agree What are systems that you use, in order to facilitate this kind of "backup"? I can understand that you can do code review, but is there a simple way to conduct this? I think we are not ready for a full blown, check-in by check-in code review.

  Read the article

• Advancing Code Review and Unit Testing Practice

  - by Graviton

  As a team lead managing a group of developers with no experience ( and see no need) in code review and unit testing, how can you advance code review and unit testing practice? How are you going to create a way so that code review and unit testing to naturally fit into the developer's flow? One of the resistance of these two areas is that "we are always tight on dateline, so no time for code review and unit testing". Another resistance for code review is that we currently don't know how to do it. Should we review the code upon every check-in, or review the code at a specified date?

  Read the article

• Developer Compensation System

  - by Graviton

  Joel wrote excellent articles on developer compensation system used at Fogcreek. As a team lead and business owner, I would like to device a system that would work best for my team. And here's the catch: I have no experience in managing a team before, and I don't know what works and what doesn't. So I would like to get as many references as I can on this matter. Is there other developer compensation systems that you find is working for you and your company?

  Read the article

• How to promote code reuse and documentation?

  - by Graviton

  As a team lead of about 10+ developers, I would want to promote code reuse. We have written a lot of code-- a lot of them are repetitive over the past few years. The problem now is that a lot of these code are just duplicate of some other code or a slight variation of them. I have started the movement ( discussion) on how to make code into components so that they can be reused for the future projects, but the problem is that I afraid the new developers or other developers who are ignorant of the components will just go forward and write their own thing. Is there anyway to remind the developers to reuse the components/ improve the documentation/ contribute to the underlying component instead of duplicating the existing code and tweaking on it or just write their own? How to make the components easily discover-able, easily usable so that everyone will use it? Edit: I think every developer knows about the benefit of reusable components and wants to use them, it's just that we don't know how to make them discoverable. Also, the developers when they are writing code, they know they should write reusable code but lack of the motivation to do so.

  Read the article

• Download Speed is 0.12 Mbps when tested with servers in U.S, but it is 0.76 Mbps when tested with local servers, normal? [closed]

  - by Graviton

  Feeling that my ISP is cheating my money ( My subscription package is 1 Mbps), I did a speed test on my internet connection using www.speedtest.net. I tried to test the connection speed on two servers, one local ( Malaysia), another in U.S. I found that while the upload speed remain constant, but the download speed is different; 0.76 Mbps for servers in Malaysia, and 0.12 Mbps for servers in U.S. I called the ISP, and they blamed it on the intercontinental signal lost. But how can it be that the speed differs by that much? If it really differs by that much than we should always take a grain of salt of what is advertised as the broadband speed because the advertised speed is not the speed we are getting. No?

  Read the article

• Are programmers a bunch of heartless robots who are lacking of empathy? [closed]

  - by Graviton

  OK, the provocative title got your attention. My experience as a programmer and dealing with my fellow programmers is that, a programmer is also usually someone who is so consumed by his programming work, so absorbed in his algorithmic construction that he has little passion/ time left for anything else, which includes empathy for other people, love and care for the people whom he love or should love ( such as their spouses, parents, kids, colleagues etc). The better a person is in terms of his programming powers, the more defective he is in terms of love/care because both honing programming skills and loving the surrounding takes time and one has only so much time to be allocated among so many different things. Also, programming ( especially INTERESTING programming job, like, writing an AI to predict the future search trend) is a highly consuming job; it doesn't just consume you from 9 to 5, it will also consume you after 5 and practically every second of your waking hours because a good programmer can't just magically switch off his thinking hat after the office lights go off ( If you can then I don't really think you are a passionate programmer, and the prerequisite of a good programmer is passion). So, a good programmer is necessarily someone who can't love as much as others do because the very nature of the programming job prevents him from loving others as much as he wants to. Do you concur with my observation/ reasoning?

  Read the article

• Software Management Tools for Agile Process Development

  - by Graviton

  We would like to implement the Agile/ Scrum process in our daily software management, so as to provide better progress visibility and feature managements, here are some of the activities that we want to do: Daily stand-up Release cycles of 6 weeks with 3 2-week iterations. Having a product back-log of tasks (integrate with bugzilla) and bugs estimated out. Printing a daily burn down to make velocity visible. When used as motivator, it's great. Easy feature development tracking and full blown visibility, especially for the sales and stake holders ( this means that it must be a web based tool). My team is distributed, so physical whiteboards aren't feasible. Is there such a web based tool that meets our needs? I heard icescrum may be one, but I've never used it so I don't know. There are a few more suggestions as here, but I've never heard of them, anyone cares to elaborate or suggest new tools?

  Read the article

• How should Code Review be Carried Out?

  - by Graviton

  My previous question has to do with how to advance code review among the developers. Here I am interested in how the code review session should be carried out, so that both the reviewer and reviewed are feeling comfortable about it. I have done some code review before, but the experience sucks big time. My previous manager would come to us-- on an ad hoc basis-- and tell us to explain our code to him. Since he wasn't very familiar with the code base, I spent a huge amount of times explaining just the most basic structure of my code to him. This took a long time and by the time we were done, we were both exhausted. Then he would raise issues with my code. Most issues he raised were cosmetic in nature ( e.g, don't use region for this code block, change the variable name from xxx to yyy even though the later makes even less sense, and so on). We did this a few rounds, and the review session didn't derive much benefits for us, and we stopped. What do you have to do, in order to make code review a natural, enjoyable, thought stimulating, bug-fixing and mutual-learning experience?

  Read the article

• Is Tracking Software Usage Illegal?

  - by Graviton

  Let's say if I am doing desktop application, and I am interested to know whether our software really gets used or not. Is it alright to insert in code that tracks whether our software is used, for how long and so on? Note that no person-identifiable information will be collected, all I am interested to know is how frequent and for how long the software is used. The information will be sent to our server for diagnosis. What do you think?

  Read the article

• Is .Net Going to Die As far as Server Apps and Desktop Apps are concerned? [closed]

  - by Graviton

  Possible Duplicate: What does Windows 8 mean for the future of .NET? The Windows 8 preview doesn't mention .Net, and the demo seems to showcase what HTML, CSS and Javascript can do on Windows 8 OS. The impression I get from watching it is that HTML , Javascript is going to figure prominently in Windows 8, even for the traditional windows desktop applications. That, couple with the fact that there is no mentioning of .Net 5 and Visual Studio 2012 or 2013( MS is pretty quick to announce the next generation VS tools) yet, makes me worry that sooner or later, Microsoft will abandon the .Net platform completely. Yes, not just abandoning Silverlight, but the .Net platform in general. Which means that all the desktop apps, server apps you wrote in .Net is going to be obsolete, much like how VB6 apps are now obsolete. Is .Net going to die? Of course you won't find that all .Net apps stop running tomorrow. But will there be a day-- even when at that time Microsoft is alive and kicking-- when .Net apps are looked upon as legacy apps in the way we perceive VB6 apps? Edit: I've changed the wording of the title, so it's not a dupe of existing question. Please take note.

  Read the article

• What are the things you can do to maximize your chances of hitting good programmers in the campus?

  - by Graviton

  I'm thinking about approaching my lecturers in my university for student recommendation for me to hire. So far the emails I sent are not very encouraging. The lecturers either coming back to me, saying that they couldn't get good students, or just ignore my mail. I tried to be as polite as I could in the email, so I think it's not etiquette issue that turn them off. Still, I plan to visit my campus. What are the things I can do to maximize your chances of hitting good programmers in the campus? Any experience you can share?

  Read the article

• tomato firmware unstable when I am connected to Chromecast

  - by Graviton

  I have an Asus RT-N12D1, and I installed the tomato firmware by shibby ( version tomato-K26-1.28.RT-N5x-MIPSR2-112-Max.trx). However I found that the connection can be really unstable. Whenever I stream youtube videos on TV via Chromecast ( I tried both the cast from iPad and Win7, both can reproduce the problem), the router will frequently restart itself, leading to a loss of connection and subsequent reconnection. I want to get this problem fixed, but I don't know how. Is there anyway where I can troubleshoot what is the real problem, or is there anyway I can collect enough log information so that I can then present to the original developer for a fix ( maybe)?

  Read the article

• Cannot delete an existing service using sc command: The Specified service does not exist as an installed service

  - by Graviton

  As shown in the picture below, I want to delete MyNewService, but when I type in sc delete MyNewService I simply can't delete it because there is no such servic, due to "the Specified service does not exist as an installed service" error Any ideas how to solve this problem? Edit: as far as the service panel is concerned, the MyNewService is there all the time; I restarted the pc a few times, and it's there.

  Read the article

• Using a Custom Domain Name In Place of etsy

  - by Graviton

  I am thinking about creating an online shop at etsy, the one requirement I have is, I want user to see my domain name (www.myname.com), instead of myname.etsy.com. Given that I don't have access to the etsy server, is there thing I can do on my domain redirect( assuming I am using apache), so that whatever request on www.myname.com will be translated to the etsy side? This is so that whoever comes to my website won't see the word etsy in the url. Another particular thing is that I want my custom domain name to show in the web browser location bar when the redirect completes. Is there anyway to do this with apache?

  Read the article

• Force-refreshing only JavaScript files in Firefox and Chrome

  - by Graviton

  I want to clear only JavaScript files from my web browsers (Firefox and Chrome). I am doing JavaScript debugging, and it's annoying that my JS just won't get updated whenever I change my JS files. The only thing I can do now is to clear my cookies, but doing that erases all of my browsing history. How can I clear/refresh the JavaScript files that have been loaded into my browsers without clearing out other files?

  Read the article

• How to find out the reason why a scheduled task hang?

  - by Graviton

  I have scheduled quite a number of tasks in my Windows 7, doing a variety of cron jobs on my machines. I am perfectly sure that these tasks, when run on their own, won't hang. But the problem is that, when I run them daily, over the course of several days and weeks and months, occasionally some of them will hang. So I am forced to kill the hanged task and rerun it--- and now it can run successfully! I want to fix this problem once and for all, and for that, I need to know why a scheduled task will hang, even when I run it separately, it won't. Anyway for me to find out the reason?

  Read the article

• Collect and Backup Photos from Multiple Photographers

  - by Graviton

  I have a few photographers working under me ( well, not exactly under me, but I say it anyway just for illustration purpose), so they shoot a lot of photos, the problem is that they all store their photos on their hard disk, and I have no way to retrieve them unless I pass them an USB and ask them to fill it with their photos. Very labor intensive and inefficient! Is there any other better ( more automated) ways of doing this? For the fear of losing the resolution, I don't really favor a online-synch approach, because I think all the photos uploaded to any website will suffer a resolution loss, which is the last thing I want. Is there a better idea? Edit: Being artistic as they are, I can't guarantee that they all use PC and Windows; so the software must at least be able to run on Mac.

  Read the article

• Dealing with Imprecise Drawing in CAD Drawing

  - by Graviton

  I have a CAD application, that allows user to draw lines and polygons and all that. One thorny problem that I face is user drawing can be highly imprecise, for example, a user might want to draw two rectangles that are connected to each other. Hence there should be one line shared by two rectangles. However, it's easy for user to, instead of draw a line, draw two lines that are very close to each other, so close to each other that when look from the screen, you would be mistaken that they are the same line, except that they aren't when you zoom in a little bit. My application would require user to properly draw the lines ( or my preprocessing must be able to do auto correction), or else my internal algorithm would not be able to process the inputs correctly. What is the best strategy to combat this kind of problem? I am thinking about rounding the point coordinates to a certain degree of precision, but although I can't exactly pinpoint the problem of this approach, but I feel that this is not the correct way of doing things, that this will introduce a new set of problem. Any idea?

  Read the article

• Free Memory Occupied by Std List, Vector, Map etc

  - by Graviton

  Coming from a C# background, I have only vaguest idea on memory management on C++-- all I know is that I would have to free the memory manually. As a result my C++ code is written in such a way that objects of the type std::vector, std::list, std::map are freely instantiated, used, but not freed. I didn't realize this point until I am almost done with my programs, now my code is consisted of the following kinds of patterns: struct Point_2 { double x; double y; }; struct Point_3 { double x; double y; double z; }; list<list<Point_2>> Computation::ComputationJob(list<Point_3> pts3D, vector<Point_2> vectors) { map<Point_2, double> pt2DMap=ConstructPointMap(pts3D); vector<Point_2> vectorList = ConstructVectors(vectors); list<list<Point_2>> faceList2D=ConstructPoints(vectorList , pt2DMap); return faceList2D; } My question is, must I free every.single.one of the list usage ( in the above example, this means that I would have to free pt2DMap, vectorList and faceList2D)? That would be very tedious! I might just as well rewrite my Computation class so that it is less prone to memory leak. Any idea how to fix this?

  Read the article

• Sudo yum seems to fail on CentOS, but works fine after sudo -i

  - by Aron Rotteveel

  I am currently having some trouble with yum through sudo. For some reason, it does not seem to work: aron@graviton [/var/log]# sudo yum clean all There was a problem importing one of the Python modules required to run yum. The error leading to this problem was: /usr/lib64/python2.4/lib-dynload/datetime.so: failed to map segment from shared object: Cannot allocate memory Please install a package which provides this module, or verify that the module is installed correctly. It's possible that the above module doesn't match the current version of Python, which is: 2.4.3 (#1, Sep 3 2009, 15:37:37) [GCC 4.1.2 20080704 (Red Hat 4.1.2-46)] If you cannot solve this problem yourself, please go to the yum faq at: http://wiki.linux.duke.edu/YumFaq The strange thing, however, is that it works fine when I gain root privileges through sudo -i first. Any ideas what might be causing this problem?

  Read the article

1 2  | Next Page >