Search Results

Search found 26 results on 2 pages for 'manyxcxi'.

Page 1/2 | 1 2  | Next Page >

• Raid Shows Up as Multiple Drives - Can't Mount

  - by manyxcxi

  I have a single hard drive that the OS is installed on and I have Sil raid card installed with two matching 500GB hdds set up in Raid 0 and formatted- they're completely empty. For whatever reason they are showing up as /dev/sdb and /dev/sdc and not as a single hard drive. I used fdisk to format both raid drives as Linux raid auto (fd) but I cannot mount either device and dmraid doesn't seem to want to work, what step am I missing? When I installed 9.04 oh so long ago it seems like it recognized and automatically did everything that needed to be done, now I'm stuck. dmraid Output root@tripoli:~# dmraid -r /dev/sdc: sil, "sil_biaebhadcfcb", stripe, ok, 976771072 sectors, data@ 0 /dev/sdb: sil, "sil_biaebhadcfcb", stripe, ok, 976771072 sectors, data@ 0 root@tripoli:~# dmraid -ay RAID set "sil_biaebhadcfcb" already active fdisk Output root@tripoli:~# fdisk -l Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000b9b01 Device Boot Start End Blocks Id System /dev/sda1 * 1 32 248832 83 Linux Partition 1 does not end on cylinder boundary. /dev/sda2 32 60802 488134657 5 Extended /dev/sda5 32 60802 488134656 8e Linux LVM Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x6ead5c9a Device Boot Start End Blocks Id System /dev/sdb1 1 60801 488384001 fd Linux raid autodetect Disk /dev/sdc: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xe6e2af28 Device Boot Start End Blocks Id System /dev/sdc1 1 60801 488384001 fd Linux raid autodetect

  Read the article

• Where do I find nmake for Windows 7

  - by manyxcxi

  I'm trying to compile a Perl source and I can't seem to find a version of nmake that works with Windows 7 64 bit. I've searched all over Microsoft's website and my Googlefu seems to be failing me. Can I use a different compiler- if so suggestions/resources? I'm a native Linux user so pardon my ignorance

  Read the article

• Redirect Using htaccess

  - by manyxcxi

  I am trying to redirect /folder to / using .htaccess but all am I getting is the Apache HTTP Server Test Page. My root directory looks like this: / .htaccess -/folder -/folder2 -/folder3 My .htaccess looks like this: RewriteEngine On RewriteCond %{REQUEST_URI} !^/folder/ RewriteRule (.*) /folder/$1 What am I doing wrong? I checked my httpd.conf (I'm running Centos) and the mod_rewrite library is being loaded. As a side note, my server is not a www server, it's simply a virtual machine so it's hostname is centosvm.

  Read the article

• Redirect Web Subfolder to Root (/folder to /)

  - by manyxcxi

  I am trying to redirect /folder to / using .htaccess but all am I getting is the Apache HTTP Server Test Page. My root directory looks like this: / .htaccess -/folder -/folder2 -/folder3 My .htaccess looks like this: RewriteEngine On RewriteCond %{REQUEST_URI} !^/folder/ RewriteRule (.*) /folder/$1 What am I doing wrong? I checked my httpd.conf (I'm running Centos) and the mod_rewrite library is being loaded. As a side note, my server is not a www server, it's simply a virtual machine so it's hostname is centosvm. Addition: My httpd.conf looks like so: <VirtualHost *:80> ServerName taa.local DocumentRoot /var/www/html SetEnv APPLICATION_ENV "dev" Alias /taa /var/www/html/taa/public <Directory /var/www/html/taa/public> DirectoryIndex index.php AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost>

  Read the article

• Alias a Virtual Directory or Application as Root on IIS 7

  - by manyxcxi

  Our current IIS setup as two applications running on different paths at (for example) http://server/sub-a and http://server/sub-b. I want to alias http://server/sub-a as root so that just going to http://server/ will bring up the contents of sub-a. The problem I face is that when I initially set up a ReverseProxy it negatively affected http://server/sub-b. I know this is a fairly common problem- how have you solved it? 99.9% of my experience is with Apache, so I feel a tad lost in the GUI world of IIS.

  Read the article

• Redirect Root Directory to Subdirectory using mod_rewrite

  - by manyxcxi

  I am trying to redirect /folder to / using .htaccess but all am I getting is the Apache HTTP Server Test Page. My root directory looks like this: / .htaccess -/folder -/folder2 -/folder3 My .htaccess looks like this: RewriteEngine On RewriteCond %{REQUEST_URI} !^/folder/ RewriteRule (.*) /folder/$1 What am I doing wrong? I checked my httpd.conf (I'm running Centos) and the mod_rewrite library is being loaded. As a side note, my server is not a www server, it's simply a virtual machine so it's hostname is centosvm.

  Read the article

• Rewrite /folder to / Using .htaccess

  - by manyxcxi

  I am trying to redirect /folder to / using .htaccess but all am I getting is the Apache HTTP Server Test Page. My root directory looks like this: / .htaccess -/folder -/folder2 -/folder3 My .htaccess looks like this: RewriteEngine On RewriteCond %{REQUEST_URI} !^/folder/ RewriteRule (.*) /folder/$1 What am I doing wrong? I checked my httpd.conf (I'm running Centos) and the mod_rewrite library is being loaded. As a side note, my server is not a www server, it's simply a virtual machine so it's hostname is centosvm.

  Read the article

• Good Hosting Providers With Zend Framework Support [closed]

  - by manyxcxi

  I currently use ixwebhosting for my hosting services. They're cheap and work (most of the time). The databases are horribly slow, the servers are horribly slow, and their support (though usually prompt) is tough to deal with. That being said, they're cheap, I've got like 20 domains hosted in my account, none of them are high volume, and they work JUST good enough- until today. This isn't meant to be a condemnation of ixwh though. Their prices are very low for what they do offer and most things work just fine, most of the time. I need to be able to host web apps written with Zend Framework in a fairly easy fashion. The server performance can't be worse than what I've already had (a pretty low hurdle to clear), and I don't want to spend $30/mo. These are not money making websites- they're projects. My requirements are PHP 5.3, ZF support, MySQL databases, multiple domains- not much. Who should I look at, and who should I look out for?

  Read the article

• Multithreading/Parallel Processing in PHP

  - by manyxcxi

  I have a PHP script that will generate a report using PHPExcel from data queried from a MySQL DB. Currently, it is linear in processing in that it gets the data back from MySQL, reads in the Excel template, writes the data to the template, then outputs it. I have optimized the code to the point that the data is only iterated over once, and there is very little processing done on the PHP side. The query returns hundreds of lines in less than .001 seconds, so it is running fast enough. After some timing I have found my bottlenecks to be (surprise, surprise) reading the template and writing the output. I would like to do this: Spawn a thread/process to read the template Spawn a thread/process to fetch the data Return back to parent thread - Parent thread will wait until both are complete Proceed on as normal My main questions are is this possible, is it worth it? If yes to both, how would you tackle it? Also, it is PHP 5 on CentOS

  Read the article

• Perf4J Logging Config Help

  - by manyxcxi

  I currently have a long running process that I am trying to analyze with Perf4J. I currently have it writing results in CSV format to its own log file using the AsyncCoalescingStatisticsAppender and a StatisticsCsvLayout on the file appender. My question is; when I try and use the --graph option from the command line (using the perf4j jar) it isn't populating the data points- it isn't populating anything. Are my appenders set incorrectly? The log file contains hundreds (sometimes thousands) of data points of about 10 different tag names. <appender name="perfAppender" class="org.apache.log4j.FileAppender"> <param name="File" value="perfStats.log"/> <layout class="org.perf4j.log4j.StatisticsCsvLayout"> </layout> </appender> <appender name="CoalescingStatistics" class="org.perf4j.log4j.AsyncCoalescingStatisticsAppender"> <!-- The TimeSlice option is used to determine the time window for which all received StopWatch logs are aggregated to create a single GroupedTimingStatistics log. Here we set it to 10 seconds, overriding the default of 30000 ms --> <param name="TimeSlice" value="10000"/> <appender-ref ref="ConsoleAppender"/> <appender-ref ref="CompositeRollingFileAppender"/> <appender-ref ref="perfAppender"/> </appender>

  Read the article

• Perf4J Graph Output from Log File

  - by manyxcxi

  I currently have a long running process that I am trying to analyze with Perf4J. I currently have it writing results in CSV format to its own log file using the AsyncCoalescingStatisticsAppender and a StatisticsCsvLayout on the file appender. My question is; when I try and use the --graph option from the command line (using the perf4j jar) it isn't populating the data points- it isn't populating anything. Are my appenders set incorrectly? The log file contains hundreds (sometimes thousands) of data points of about 10 different tag names. <appender name="perfAppender" class="org.apache.log4j.FileAppender"> <param name="File" value="perfStats.log"/> <layout class="org.perf4j.log4j.StatisticsCsvLayout"> </layout> </appender> <appender name="CoalescingStatistics" class="org.perf4j.log4j.AsyncCoalescingStatisticsAppender"> <!-- The TimeSlice option is used to determine the time window for which all received StopWatch logs are aggregated to create a single GroupedTimingStatistics log. Here we set it to 10 seconds, overriding the default of 30000 ms --> <param name="TimeSlice" value="10000"/> <appender-ref ref="ConsoleAppender"/> <appender-ref ref="CompositeRollingFileAppender"/> <appender-ref ref="perfAppender"/> </appender>

  Read the article

• MySQL Column Value Pivot

  - by manyxcxi

  I have a MySQL InnoDB table laid out like so: id (int), run_id (int), element_name (varchar), value (text), line_order, column_order `MyDB`.`MyTable` ( `id` bigint(20) NOT NULL, `run_id` int(11) NOT NULL, `element_name` varchar(255) NOT NULL, `value` text, `line_order` int(11) default NULL, `column_order` int(11) default NULL It is used to store data generated by a Java program that used to output this in CSV format, hence the line_order and column_order. Lets say I have 2 entries (according to the table description): 1,1,'ELEMENT 1','A',0,0 2,1,'ELEMENT 2','B',0,1 I want to pivot this data in a view for reporting so that it would look like more like the CSV would, where the output would look this: --------------------- |ELEMENT 1|ELEMENT 2| --------------------- | A | B | --------------------- The data coming in is extremely dynamic; it can be in any order, can be any of over 900 different elements, and the value could be anything. The Run ID ties them all together, and the line and column order basically let me know where the user wants that data to come back in order.

  Read the article

• Basic Hibernate Caching Question

  - by manyxcxi

  Doe Hibernate use cache (second level or otherwise) if all I am doing is batch inserts? No entities are being requested from the database, and no generators are used. Also, would StatelessSession vs Session change the answer? What if I was using a Session with a JDBC batch size of 50? The cache I will be using is Ehcache

  Read the article

• Keep Hibernate Initializer from Crashing Program

  - by manyxcxi

  I have a Java program using a basic Hibernate session factory. I had an issue with a hibernate hbm.xml mapping file and it crashed my program even though I had the getSessionFactory() call in a try catch try { session = SessionFactoryUtil.getSessionFactory().openStatelessSession(); session.beginTransaction(); rh = getRunHistoryEntry(session); if(rh == null) { throw new Exception("No run history information found in the database for run id " + runId_ + "!"); } } catch(Exception ex) { logger.error("Error initializing hibernate"); } It still manages to break out of this try/catch and crash the main thread. How do I keep it from doing this? The main issue is I have a bunch of cleanup commands that NEED to be run before the main thread shuts down and need to be able to guarantee that even after a failure it still cleans up and goes down somewhat gracefully. The session factory looks like this: public class SessionFactoryUtil { private static final SessionFactory sessionFactory; static { try { // Create the SessionFactory from hibernate.cfg.xml sessionFactory = new Configuration().configure().buildSessionFactory(); } catch (Throwable ex) { // Make sure you log the exception, as it might be swallowed System.err.println("Initial SessionFactory creation failed." + ex); throw new ExceptionInInitializerError(ex); } } public static SessionFactory getSessionFactory() { try { return sessionFactory; } catch(Exception ex) { return null; } } }

  Read the article

• Redirect Using htaccess

  - by manyxcxi

  I am trying to redirect /folder to / using .htaccess but all am I getting is the Apache HTTP Server Test Page. My root directory looks like this: / .htaccess -/folder -/folder2 -/folder3 My .htaccess looks like this: RewriteEngine On RewriteCond %{REQUEST_URI} !^/folder/ RewriteRule ^(.*)$ folder/$1 [L] What am I doing wrong? I checked my httpd.conf (I'm running Centos 5.3) and the mod_rewrite library is being loaded. As a side note, my server is not a www server, its simply a virtual machine so its hostname is centosvm. Addition: I have found that the mod_rewrite module is loaded, but none of my .htaccess redirects seem to be working.

  Read the article

• Variable amount of columns returned in mysqli prepared statement

  - by manyxcxi

  I have a situation where a dynamic query is being generated that could select anywhere from 1 to over 300 different columns across multiple tables. It currently works fine just doing a query, however the issue I'm running into in using a prepared statement is that I do not know how to handle the fact that I don't know how many columns I will be asking for each time and therefor don't know how to process the results. The reason I believe a bind statement will help is because once this query is run once, it will most likely (though not always) be run again with the exact same parameters. Currently I have something like this: $rows = array(); $this->statement = $this->db->prepare($query); $this->statement->bind_param('i',$id); $this->statement->execute(); $this->statement->bind_result($result); while($this->statement->fetch()) { $rows[] = $result; } I know this doesn't work as I want it to, my question is how do I get the data back out of the query. Is it possible to bring the columns back in an associative array by column name, like a standard mysqli query?

  Read the article

• Delete all but 5 newest entries in MySQL table

  - by manyxcxi

  I currently have PHP code that handles the logic for this because I do not know how to handle it in SQL. I want to create a stored procedure that will select all the elements in a table for a given run_id and delete all of them except for the 'newest' 5 entries (as noted by the stop_time column). CREATE TABLE `TAA`.`RunHistory` ( `id` int(11) NOT NULL auto_increment, `start_time` datetime default NULL, `stop_time` datetime default NULL, `success_lines` int(11) default NULL, `error_lines` int(11) default NULL, `config_id` int(11) NOT NULL, `file_id` int(11) NOT NULL, `notes` text NOT NULL, `log_file` longblob, `save` tinyint(1) NOT NULL default '0', PRIMARY KEY (`id`) ) ENGINE=InnoDB AUTO_INCREMENT=128 DEFAULT CHARSET=utf8;

  Read the article

• A better way to delete a list of elements from multiple tables

  - by manyxcxi

  I know this looks like a 'please write the code' request, but some basic pointer/principles for doing this the right way should be enough to get me going. I have the following stored procedure: CREATE PROCEDURE `TAA`.`runClean` (IN idlist varchar(1000)) BEGIN DECLARE EXIT HANDLER FOR NOT FOUND ROLLBACK; DECLARE EXIT HANDLER FOR SQLEXCEPTION ROLLBACK; DECLARE EXIT HANDLER FOR SQLWARNING ROLLBACK; START TRANSACTION; DELETE FROM RunningReports WHERE run_id IN (idlist); DELETE FROM TMD_INDATA_INVOICE WHERE run_id IN (idlist); DELETE FROM TMD_INDATA_LINE WHERE run_id IN (idlist); DELETE FROM TMD_OUTDATA_INVOICE WHERE run_id IN (idlist); DELETE FROM TMD_OUTDATA_LINE WHERE run_id IN (idlist); DELETE FROM TMD_TEST WHERE run_id IN (idlist); DELETE FROM RunHistory WHERE id IN (idlist); COMMIT; END $$ It is called by a PHP script to clean out old run history. It is not particularly efficient as you can see and I would like to speed it up. The PHP script gathers the ids to remove from the tables with the following query: $query = "SELECT id, stop_time FROM RunHistory WHERE config_id = $configId AND save = 0 AND NOT(stop_time IS NULL) ORDER BY stop_time"; It keeps the last five run entries and deletes all the rest. So using this query to bring back all the IDs, it determines which ones to delete and keeps the 'newest' five. After gathering the IDs it sends them to the stored procedure to remove them from the associated tables. I'm not very good with SQL, but I ASSUME that using an IN statement and not joining these tables together is probably the least efficient way I can do this, but I don't know enough to ask anything but "how do I do this better?" If possible, I would like to do this all in my stored procedure using a query to gather all the IDs except for the five 'newest', then delete them. Another twist, run entries can be marked save (save = 1) and should not be deleted. The RunHistory table looks like this: CREATE TABLE `TAA`.`RunHistory` ( `id` int(11) NOT NULL auto_increment, `start_time` datetime default NULL, `stop_time` datetime default NULL, `config_id` int(11) NOT NULL, [...] `save` tinyint(1) NOT NULL default '0', PRIMARY KEY (`id`) ) ENGINE=InnoDB AUTO_INCREMENT=0 DEFAULT CHARSET=utf8;

  Read the article

• Templating Engine Pros and Cons with Zend Framework

  - by manyxcxi

  I am getting familiar with Zend Framework (and MVC with PHP in general) for a personal project. I have previous experience with Smarty and have no major gripes with it, but I would like to use this project as a good in-depth learning exercise. Those of you familiar with different templating engines and ZF: Do you believe there are better templating engines than Smarty in conjunction with ZF and why? I would like to apply what I learn to the real world and production environments. The personal project will be fairly robust. User management, sessions, security, database interaction, form input, jQuery, etc.

  Read the article

• How to add/register helpers with Zend Framework

  - by manyxcxi

  I'm just starting out with Zend Framework and am having issues using Zend_Controller_Action_HelperBroker::addPath() to add helpers. I'm not sure if my classes are named incorrectly, I'm giving it the wrong prefix, or what I'm doing wrong so I will post the code and file structure and get out of the way. In Bootstrap.php public function __construct($application) { ... // This works with a manual include_once('../application/plugins/helpers/Csrf.php'); //Zend_Controller_Action_HelperBroker::addHelper(new Application_Controller_Action_Helper_Csrf()); // This isn't picking up my helper class automagically Zend_Controller_Action_HelperBroker::addPath('../application/plugins/helpers','Application_Controller_Action_Helper'); ... } In application/plugins/helpers/Csrf.php class Application_Controller_Action_Helper_Csrf extends Zend_Controller_Action_Helper_Abstract { ... } My directory tree: / application/ ... plugins/ helpers/ Csrf.php CsrfProtect.php ...

  Read the article

• How to use Zend_Controller_Action_HelperBroker::addPath to add helpers

  - by manyxcxi

  I'm just starting out with Zend Framework and am having issues using the addPath to add helpers. I'm not sure if my classes are named incorrectly, I'm giving it the wrong prefix, or what I'm doing wrong so I will post the code and file structure and get out of the way. In Bootstrap.php public function __construct($application) { ... // This works with a manual include_once('../application/plugins/helpers/Csrf.php'); //Zend_Controller_Action_HelperBroker::addHelper(new Application_Controller_Action_Helper_Csrf()); // This isn't picking up my helper class automagically Zend_Controller_Action_HelperBroker::addPath('../application/plugins/helpers','Application_Controller_Action_Helper'); ... } In application/plugins/helpers/Csrf.php class Application_Controller_Action_Helper_Csrf extends Zend_Controller_Action_Helper_Abstract { ... } My directory tree / application/ ... plugins/ helpers/ Csrf.php CsrfProtect.php ...

  Read the article

• Zend Framework on a Shared Host

  - by manyxcxi

  I am trying to push my first ZF project to my shared hosting provider. I have done a lot of testing on my home server and everything is working great. My issue is that I do not know how to set up my .htaccess files on the shared hosting provider to make it work correctly. The ZF documentation says to configure my Apache config VirtualServer DocumentRoot to /whatever/path/project-folder/public, but I don't have that kind of access. How do I get around this? I have seen http://stackoverflow.com/questions/1115547/zend-framework-on-shared-hosting but none of those solutions have worked for me. My application path looks like this / - .htaccess - /application ... - /public -- .htaccess -- index.php -- ... ... My .htaccess files look like: /.htaccess RewriteEngine On RewriteRule !\.(js|gif|jpg|png|css|txt)$ public/index.php [L] RewriteCond %{REQUEST_URI} !^/public/ RewriteRule ^(.*)$ public/$1 [L] /public/.htaccess RewriteEngine On RewriteCond %{REQUEST_FILENAME} -s [OR] RewriteCond %{REQUEST_FILENAME} -l [OR] RewriteCond %{REQUEST_FILENAME} -d RewriteRule ^.*$ - [NC,L] RewriteRule ^.*$ index.php [NC,L]

  Read the article

• Any way to optimize this MySQL query?

  - by manyxcxi

  My table looks like this: `MyDB`.`Details` ( `id` bigint(20) NOT NULL, `run_id` int(11) NOT NULL, `element_name` varchar(255) NOT NULL, `value` text, `line_order` int(11) default NULL, `column_order` int(11) default NULL ); I have the following SELECT statement in a stored procedure SELECT RULE ,TITLE ,SUM(IF(t.PASSED='Y',1,0)) AS PASS ,SUM(IF(t.PASSED='N',1,0)) AS FAIL FROM ( SELECT a.line_order ,MAX(CASE WHEN a.element_name = 'PASSED' THEN a.`value` END) AS PASSED ,MAX(CASE WHEN a.element_name = 'RULE' THEN a.`value` END) AS RULE ,MAX(CASE WHEN a.element_name = 'TITLE' THEN a.`value` END) AS TITLE FROM Details a WHERE run_id = runId GROUP BY line_order ) t GROUP BY RULE, TITLE; *runId is an input parameter to the stored procedure. This query takes about 14 seconds to run. The table has 214856 rows, and the particular run_id I am filtering on has 162204 records. It's not on a super high power machine, but I feel like I could be doing this more efficiently. My main goal is to summarize by Rule and Title and show Pass and Fail count columns.

  Read the article

• Does variable = null set it for garbage collection

  - by manyxcxi

  Help me settle a dispute with a coworker: Does setting a variable or collection to null in Java aid in garbage collection and reducing memory usage? If I have a long running program and each function may be iteratively called (potentially thousands of times): Does setting all the variables in it to null before returning a value to the parent function help reduce heap size/memory usage?

  Read the article

• Good Hosting Providers With Zend Framework Support

  - by manyxcxi

  I currently use ixwebhosting for my hosting services. They're cheap and work (most of the time). The databases are horribly slow, the servers are horribly slow, and their support (though usually prompt) is tough to deal with. That being said, they're cheap, I've got like 20 domains hosted in my account, none of them are high volume, and they work JUST good enough- until today. This isn't meant to be a condemnation of ixwh though. Their prices are very low for what they do offer and most things work just fine, most of the time. I need to be able to host web apps written with Zend Framework in a fairly easy fashion. The server performance can't be worse than what I've already had (a pretty low hurdle to clear), and I don't want to spend $30/mo. These are not money making websites- they're projects. My requirements are PHP 5.3, ZF support, MySQL databases, multiple domains- not much. Who should I look at, and who should I look out for? Also- I put this on SO instead of SF because of the Zend Framework specific requirement. If I'm wrong, do as you wish.

  Read the article

1 2  | Next Page >