Search Results

Search found 51 results on 3 pages for 'maximus'.

Page 1/3 | 1 2 3  | Next Page >

  • User Story or User Stories for this specific requirement

    - by Maximus
    I have to write a user story for a requirement that involves passing search filters to the same URI and retrieving corresponding results. I have 5 filters. I plan to write 5 different stories of type: As a URI user I can search by #filter1 so that I can retrieve results based on #filter1. And then a 6th story that involves searching one or more or all six filters in conjunction. Is this is a sensible route to take?

    Read the article

  • From simple physics with a ball, to a more complicated shape

    - by Maximus
    Hello fellow game devs and stack overflowers... I recently made a transition from OpenGL ES 1.1 to 2.0 (on Android via NDK) and things are going well so far. I'm working on doing a dice rolling application (gaming dice up to 20 sided, not just regular 6 sided die) as a way to learn more about how physics is implemented in a gaming environment. I've explored implementing existing engine options (such as Bullet) and I don't think I need to implement something quite so sophisticated. I've found several tutorials that handle a lot of the general physics involved with initial trajectory, velocity, angle of contact and reflection angle, etc. I'm confident that I'd be able to implement ball-like behavior without much trouble. My question lies in when I attempt to make the interaction of the die shape with another surface more "realistic," for example... the die strikes the floor surface at such an angle where only one corner makes contact with the floor. In my mind, the center of gravity of the object would play a part in determining how the die bounces away, possibly even spinning it it faster, etc... but I am not sure what the actual math involved is. Are there any recommended resources for getting into this level of detail? Initial searches haven't turned up much... Thanks to everyone in the community, -Jeremiah

    Read the article

  • Artec TV18R Tuner not working :(

    - by Antillar Maximus
    Can somebody kindly help me setup my TV Tuner stick? Make and Model: Artec TV18R USB TV Tuner OS: Ubuntu 11.10 64bit Hardware: MSI MS1656-US (GX640 barebones): i5 580M, 2xIntel X25M SSDs, Radeon HD5850M,Realtek sound. Logs and messages: [email protected]:/usr/share/dvb/atsc$ [B][COLOR=Red]sudo lsusb[/COLOR][/B] Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 003: ID ffc0:001f Bus 002 Device 005: ID 05d8:8117 Ultima Electronics Corp. [/code][code][email protected]:/usr/share/dvb/atsc$ So, it seems that the tuner is being detected, but the light on it does not turn on? Not sure what is going on? sudo lspci [sudo] password for antillar: 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) 00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 05) 00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 05) 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) 01:00.0 VGA compatible controller: ATI Technologies Inc Broadway PRO [Mobility Radeon HD 5800 Series] 01:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 04:00.0 FireWire (IEEE 1394): JMicron Technology Corp. IEEE 1394 Host Controller 04:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller 04:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller 04:00.3 System peripheral: JMicron Technology Corp. MS Host Controller 04:00.4 System peripheral: JMicron Technology Corp. xD Host Controller 05:00.0 Network controller: Intel Corporation Ultimate N WiFi Link 5300 ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) [email protected]:/usr/share/dvb/atsc$ I have been searching for a solution to this all weekend without any luck. I remember reading that ehci_hcd is the problem, but I'm not sure if disabling it is a good idea. I don't want my USB ports to go back to v1.1. Thank you!

    Read the article

  • Build graph of dependencies (calls) in javascript [on hold]

    - by Maximus
    I'm new to a project and I see that everything is so interwoven that small changes here makes stuff break there. I'd like to refactor it and separate into modules. For that I'm going to need a tool that can build a graph of dependencies (calls) to visualize the connections. There are many tools like that for languages like C#, but I've found little information about the available tools for JavaScript. Has anyone done something like this? What tools have you used?

    Read the article

  • How to configure Unity/Compiz in 12.04 so that Update Manager opens maximized w/screen bigger than 1024×600?

    - by Jani Uusitalo
    In Precise, window auto-maximize is disabled on monitors with a resolution above 1024 × 600 [1]. I have a bigger resolution, but I prefer maximized windows anyway. I want Update Manager to start maximized. What I've tried so far: In Compiz Config Settings Manager, I have Place Windows activated and 'Windows with fixed placement mode' has windows matching the rule "(name=gnome-terminal) | (name=update-manager)" set to 'Maximize'. With this, Gnome Terminal starts maximized, Update Manager does not. In Compiz Config Settings Manager, I have set a Window Rules [2] rule to match "name=update-manager". Irregardless of any rules set or not, activating Window Rules results in not being able to bring out Unity Launcher anymore, Alt+Tab window switching becoming slow or nonfunctional entirely and the screen sporadically freezing completely. Not a viable option apparently. I've installed Maximus [3] and started it. Update Manager ignores it (or vice versa). I've not tried devilspie and would prefer not to. Having to configure something external for this would seem stupidly redundant with (the no-brainer) Maximus and all these Compiz options already available. I just can't seem to make them work. [1] https://bugs.launchpad.net/ayatana-design/+bug/797808 [2] http://askubuntu.com/a/53657/34756 [3] How to configure my system so that all windows start maximized?

    Read the article

  • Java update/install via group policy

    - by Maximus
    I trying to deploy the latest Java RE version via GP, Java 7 update 9. I want to update computers that are currently running an older version of Java, a mixture of 7.6 and 7.7, some computers are running versions as old as 6.31. Some are running a mixture of both. I would also like this GP to install Java if it's not installed. Previously I used push out Java updates to users machines as Java didn't remove the old version. So when it was done the user would restart their browser or pc to start using the latest version. Not the best way to manage it as it leaves the old version installed but it worked. I've created group policies before for printer deployment, log on drive mapping scripts, but never software deployment. I've extracted the Java MSI and created a transform file to suppress reboot etc using orca. As described on this site http://ivan.dretvic.com/2011/06/how-to-package-and-deploy-java-jre-1-6-0_26-via-group-policy/. I have also tried saving the edited MSI directly and that didn't work either. But it just won't deploy. I have tried to enable logging as suggested on this site http://openofficetechnology.com/node/32, GPO logging via UserEnvDebugLevel, Software deployment logging via AppmgmtDebugLevel and MSI logging, but there is no log C:\Windows\Debug\UserMode\userenv.log being created. The windows event viewer has the following errors: Error 24/10/2012 11:44:04 AM - "Failed to apply changes to software installation settings. Software changes could not be applied. A previous log entry with details should exist. The error was : %%1612" Information 24/10/2012 11:44:04 AM - "The removal of the assignment of application Java 7 Update 9 - FB Java Transform from policy JavaDeploy succeeded." Error 24/10/2012 11:44:04 AM - "The install of application Java 7 Update 9 - FB Java Transform from policy JavaDeploy failed. The error was : %%1612" There is a log created for MSI logging and it's as below. It says the source is invalid but it exists on the share and the PC that I'm testing has permissions and I've included the recommendation here Group Policy installation failed error 1274 to enable "Always wait for the network at computer startup and logon" === Verbose logging started: 24/10/2012 11:43:59 Build type: SHIP UNICODE 5.00.7601.00 Calling process: C:\Windows\system32\svchost.exe === MSI (c) (9C:EC) [11:43:59:898]: Resetting cached policy values MSI (c) (9C:EC) [11:43:59:898]: Machine policy value 'Debug' is 3 MSI (c) (9C:EC) [11:43:59:898]: ******* RunEngine: ******* Product: {26a24ae4-039d-4ca4-87b4-2f83217009ff} ******* Action: ******* CommandLine: ********** MSI (c) (9C:EC) [11:43:59:898]: Client-side and UI is none or basic: Running entire install on the server. MSI (c) (9C:EC) [11:43:59:898]: Grabbed execution mutex. MSI (c) (9C:EC) [11:44:03:431]: Cloaking enabled. MSI (c) (9C:EC) [11:44:03:431]: Attempting to enable all disabled privileges before calling Install on Server MSI (c) (9C:EC) [11:44:03:439]: Incrementing counter to disable shutdown. Counter after increment: 0 MSI (s) (2C:70) [11:44:03:574]: Running installation inside multi-package transaction {26a24ae4-039d-4ca4-87b4-2f83217009ff} MSI (s) (2C:70) [11:44:03:574]: Grabbed execution mutex. MSI (s) (2C:7C) [11:44:03:607]: Resetting cached policy values MSI (s) (2C:7C) [11:44:03:607]: Machine policy value 'Debug' is 3 MSI (s) (2C:7C) [11:44:03:607]: ******* RunEngine: ******* Product: {26a24ae4-039d-4ca4-87b4-2f83217009ff} ******* Action: ******* CommandLine: ********** MSI (s) (2C:7C) [11:44:03:607]: Machine policy value 'DisableUserInstalls' is 0 MSI (s) (2C:7C) [11:44:03:623]: User policy value 'SearchOrder' is 'nmu' MSI (s) (2C:7C) [11:44:03:624]: User policy value 'DisableMedia' is 0 MSI (s) (2C:7C) [11:44:03:624]: Machine policy value 'AllowLockdownMedia' is 0 MSI (s) (2C:7C) [11:44:03:624]: SOURCEMGMT: Media enabled only if package is safe. MSI (s) (2C:7C) [11:44:03:624]: SOURCEMGMT: Looking for sourcelist for product {26a24ae4-039d-4ca4-87b4-2f83217009ff} MSI (s) (2C:7C) [11:44:03:624]: SOURCEMGMT: Adding {26a24ae4-039d-4ca4-87b4-2f83217009ff}; to potential sourcelist list (pcode;disk;relpath). MSI (s) (2C:7C) [11:44:03:624]: SOURCEMGMT: Now checking product {26a24ae4-039d-4ca4-87b4-2f83217009ff} MSI (s) (2C:7C) [11:44:03:624]: SOURCEMGMT: Media is enabled for product. MSI (s) (2C:7C) [11:44:03:624]: SOURCEMGMT: Attempting to use LastUsedSource from source list. MSI (s) (2C:7C) [11:44:03:624]: SOURCEMGMT: Processing net source list. MSI (s) (2C:7C) [11:44:03:624]: SOURCEMGMT: Trying source \\server\share\deployment\Java\stable\x32\. MSI (s) (2C:7C) [11:44:03:650]: Note: 1: 2303 2: 5 3: \\server\share\ MSI (s) (2C:7C) [11:44:03:650]: Note: 1: 1325 2: deployment MSI (s) (2C:7C) [11:44:03:650]: ConnectToSource: CreatePath/CreateFilePath failed with: -2147483648 1325 -2147483648 MSI (s) (2C:7C) [11:44:03:650]: ConnectToSource (con't): CreatePath/CreateFilePath failed with: -2147483648 -2147483648 MSI (s) (2C:7C) [11:44:03:650]: SOURCEMGMT: net source '\\server\share\deployment\Java\stable\x32\' is invalid. MSI (s) (2C:7C) [11:44:03:650]: Note: 1: 1706 2: -2147483647 3: jre1.7.0_09.msi MSI (s) (2C:7C) [11:44:03:650]: SOURCEMGMT: Processing media source list. MSI (s) (2C:7C) [11:44:04:668]: Note: 1: 2203 2: 3: -2147287037 MSI (s) (2C:7C) [11:44:04:668]: SOURCEMGMT: Source is invalid due to missing/inaccessible package. MSI (s) (2C:7C) [11:44:04:668]: Note: 1: 1706 2: -2147483647 3: jre1.7.0_09.msi MSI (s) (2C:7C) [11:44:04:668]: SOURCEMGMT: Processing URL source list. MSI (s) (2C:7C) [11:44:04:668]: Note: 1: 1402 2: UNKNOWN\URL 3: 2 MSI (s) (2C:7C) [11:44:04:668]: Note: 1: 1706 2: -2147483647 3: jre1.7.0_09.msi MSI (s) (2C:7C) [11:44:04:668]: Note: 1: 1706 2: 3: jre1.7.0_09.msi MSI (s) (2C:7C) [11:44:04:668]: SOURCEMGMT: Failed to resolve source MSI (s) (2C:7C) [11:44:04:668]: MainEngineThread is returning 1612 MSI (s) (2C:70) [11:44:04:670]: User policy value 'DisableRollback' is 0 MSI (s) (2C:70) [11:44:04:670]: Machine policy value 'DisableRollback' is 0 MSI (s) (2C:70) [11:44:04:670]: Incrementing counter to disable shutdown. Counter after increment: 0 MSI (s) (2C:70) [11:44:04:670]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2 MSI (s) (2C:70) [11:44:04:671]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2 MSI (s) (2C:70) [11:44:04:671]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2 MSI (s) (2C:70) [11:44:04:671]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2 MSI (s) (2C:70) [11:44:04:671]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1 MSI (s) (2C:70) [11:44:04:671]: Restoring environment variables MSI (c) (9C:EC) [11:44:04:675]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1 MSI (c) (9C:EC) [11:44:04:675]: MainEngineThread is returning 1612 === Verbose logging stopped: 24/10/2012 11:44:04 === I'm not sure what my next approach should be. Any help would be much appreciated. Thanks.

    Read the article

  • How to connect Home Folder using PowerShell

    - by Maximus
    I tried to create user using New-QADUser cmdlet. I know this cmdlet has -HomeDrive switch. But the problem is that cmdlet is just applying path string to user's account and not creating user's home directory on the fileserver like it happens when you use ADUC console. How can I do it corerctly?

    Read the article

  • How to get diagnostic information on a failing Windows Server 2012 install

    - by Tobius Maximus
    I am trying to install a copy of Windows Server 2012 on two machines. Both machines go through the initial "Files loading" progress bar and get to the new Windows Server 2012 logo. However, the installation (on both machines) will immediately fail, and the machine will restart. I am trying to figure out if there's a way to display diagnostic information about the error before or after restarting, but Google is not helping me at all. Is there a key combination I can hit that will display an error log, perhaps?

    Read the article

  • MySQL 5.1.49 freezing every two days

    - by maximus
    Hi all, our mysql system is "freezing" every two days. By "freezing" i mean the following: it doesn't respond to ping we can't login with SSH we don't get any answer from MySQL there is no entry in the error logs! neither from linux neither from MySQL. we have already changed to a completely new hardware, we have the same problem, so it's definitely not a hardware problem. we do not have any other software installed except a firewall (iptables rule) we can restart the server from another server using rsyslog (www.rsyslog.com)(software reset) Could someone help me, by giving me some pointers what could i do to figure out the problem? I have included every detail about our settings. Thank you in advance for your help. Max. Our system parameters and settings: System-Memory: 12GB Processor: Intel 7-920 Quadcore Operating system: Debian 5 (lenny) 64bit MySQL 5.1.49 Databases: (a) a small phpbb forum (b) a 6GB database 3 tables with about 15 million rows my.cnf # # The MySQL database server configuration file. # # You can copy this to one of: # - "/etc/mysql/my.cnf" to set global options, # - "~/.my.cnf" to set user-specific options. # # One can use all long options that the program supports. # Run program with --help to get a list of available options and with # --print-defaults to see which it would actually understand and use. # # For explanations see # http://dev.mysql.com/doc/mysql/en/server-system-variables.html # This will be passed to all mysql clients # It has been reported that passwords should be enclosed with ticks/quotes # escpecially if they contain "#" chars... # Remember to edit /etc/mysql/debian.cnf when changing the socket location. [client] port = 3306 socket = /var/run/mysqld/mysqld.sock # Here is entries for some specific programs # The following values assume you have at least 32M ram # This was formally known as [safe_mysqld]. Both versions are currently parsed. [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] # # * Basic Settings # user = mysql pid-file = /var/run/mysqld/mysqld.pid socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp language = /usr/share/mysql/english skip-external-locking # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. bind-address = our-ip-address # # * Fine Tuning # key_buffer = 16M max_allowed_packet = 16M thread_stack = 256K thread_cache_size = 32 max_connections = 300 table_cache = 2048 #thread_concurrency = 4 # Used for InnoDB tables recommended to 50%-80% available memory innodb_buffer_pool_size = 6G # 20MB sometimes larger innodb_additional_mem_pool_size = 20M # 8M-16M is good for most situations innodb_log_buffer_size = 8M # Disable XA support because we do not use it innodb-support-xa = 0 # 1 is default wich is 100% secure but 2 offers better performance innodb_flush_log_at_trx_commit = 1 innodb_flush_method = O_DIRECT #innodb_thread_concurency = 8 # Recommended 64M - 512M depending on server size innodb_log_file_size = 512M # One file per table innodb_file_per_table # # * Query Cache Configuration # query_cache_limit = 1M query_cache_size = 16M #query_cache_type = 1 #query_cache_min_res_unit= 2K #join_buffer_size = 1M # # * Logging and Replication # # Both location gets rotated by the cronjob. # Be aware that this log type is a performance killer. # As of 5.1 you can enable the log at runtime! #general_log_file = /var/log/mysql/mysql.log #general_log = 1 # # Error logging goes to syslog. This is a Debian improvement :) # # Here you can see queries with especially long duration log_slow_queries = /var/log/mysql/mysql-slow.log long_query_time = 2 log-queries-not-using-indexes # # The following can be used as easy to replay backup logs or for replication. #server-id = 1 log_bin = /var/log/mysql/mysql-bin.log # WARNING: Using expire_logs_days without bin_log crashes the server! See README.Debian! expire_logs_days = 10 max_binlog_size = 100M #binlog_do_db = include_database_name #binlog_ignore_db = include_database_name # # InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/. # Read the manual for more InnoDB related options. There are many! # * InnoDB plugin # As of MySQL 5.1.38, the InnoDB plugin from Oracle is included in the MySQL source code. # It has many improvements and better performances than the built-in InnoDB storage engine. # Please read http://www.innodb.com/products/innodb_plugin/ for more information. # Uncommenting the two following lines to use the InnoDB plugin. ignore_builtin_innodb plugin-load=innodb=ha_innodb_plugin.so # # * Security Features # # Read the manual, too, if you want chroot! # chroot = /var/lib/mysql/ # # For generating SSL certificates I recommend the OpenSSL GUI "tinyca". # # ssl-ca=/etc/mysql/cacert.pem # ssl-cert=/etc/mysql/server-cert.pem # ssl-key=/etc/mysql/server-key.pem [mysqldump] quick quote-names max_allowed_packet = 16M [mysql] #no-auto-rehash # faster start of mysql but no tab completition [isamchk] key_buffer = 16M # # * NDB Cluster # # See /usr/share/doc/mysql-server-*/README.Debian for more information. # # The following configuration is read by the NDB Data Nodes (ndbd processes) # not from the NDB Management Nodes (ndb_mgmd processes). # # [MYSQL_CLUSTER] # ndb-connectstring=127.0.0.1 # # * IMPORTANT: Additional settings that can override those from this file! # !includedir /etc/mysql/conf.d/ UPDATE After installing sysstat and configuring it to collect data after every minute i have the following datas. I used sar to generate the following output: The log-file is too big so coudn't enter it here but uploaded to box.net. The link is http://www.box.net/shared/xc6rh7qqob SECOND UPDATE We started a ping command in the background, and that solved the problem. Now the server does work since more then a week. We still don't know what's the problem.

    Read the article

  • How to backup a folder and it's subfolders to CD/DVD

    - by Maximus
    If I've got a folder structure that I'd like to split so that it could be burned to multiple CDs or DVDs, what's the best tool out there to accomplish this? The folders/files have to be natively accessible once the split is done (no compression or physical splitting that would require a later join), and the folder structure should still remain intact as it spaces discs. Any ideas?

    Read the article

  • Help me exorcise my demon possessed logon script

    - by Detritus Maximus
    I have a user logon script that copies a file over to a subfolder of the current user's profile path: Script (only showing the line that isn't working): copy /Y c:\records\javasettings_Windows_x86.xml "%USERPROFILE%\Application Data\OpenOffice.org\3\user\config">>c:\records\OOo3%USERNAME%.txt 2>&1 To diagnose why it wasn't working, I did a somelogfile.log parameter on the group policy script and found that what the above command is translating to is this: C:\WINDOWS>copy /Y c:\records\javasettings_Windows_x86.xml "C:\Documents and Settings\test2\Application Data\OpenOffice.org\3\user\config" 1>>c:\records\OOo3test2.txt 2>&1 So the question is, how do I get rid of (exorcise) the " 1" in that line? Update 1: So the reason the script wasn't working was that the creator didn't have any permissions on the directory. I fixed the permissions, and now the file works but! I still have the " 1" showing on all the logs and would like to know why.

    Read the article

  • Cannot access client pc remotely due to time/date issue xp win2k3 environment -- REMOTE solution please

    - by Detritus Maximus
    When I run psexec to the user desktop (xp pro) I get "There is a time and/or date difference between the client and the server." I also get "access denied" when I run the at \clientname time /interactive "net time \server /set /y" command. I cannot access the machine from my win2k3 server's AD Users and Computers utilities. Is going to the machine the only way to remedy? Clarify: Going to the machine and doing the net time command works, but I want a remote solution please.

    Read the article

  • KeepLevelReg settings to eliminate sync prompts - errors occurred while Windows was synchronizing your data

    - by Detritus Maximus
    We have 2 XP pro VMs (Citrix) that both have problems with logout prompts appearing during logout. Users are closing the rdc before these appear: The Microsoft solution involves the creation of the KeepProgressLevel registry entry along with a value of 1 for "pause on errors." I have implemented this across the domain for this problem, yet these 2 VM's continue to have the prompts. Today, I experimented by changing the KeepProgressLevel option to 0. This is not one of the options given by MS, yet I stopped getting the prompts. Can anyone tell me what I've done by setting the value to 0? Have I basically turned off the feature as if the KeepProgressLevel entry is gone? If so, why no more prompts? I did notice during logoff that there is a red x and error message, yet no prompt.

    Read the article

  • Error with missing Wallpaper after remove unity from sudo command

    - by Vray
    After I paste these scripts into terminal, my wallpaper became white. sudo ln -s /etc/xdg/xdg-une/autostart/maximus-autostart.desktop /etc/xdg/autostart/ sudo ln -s /etc/xdg/xdg-une/autostart/netbook-launcher.desktop /etc/xdg/autostart/ sudo ln -s /usr/share/gconf/une/default/20_une-gconf-default /usr/share/gconf/defaults/ sudo ln -s /usr/share/gconf/une/mandatory/20_une-gconf-mandatory /usr/share/gconf/defaults/ sudo update-gconf-defaults Help me, I dont know what [-s] for ? and how do i get my wallpaper back. Best Regards from Newbie

    Read the article

  • Laplacian of Gaussian: how does it work? (opencv)

    - by maximus
    Does anybody know how does it work and how to do it using opencv? Laplacian can be calculated using opencv, but the result is not what I expected. I mean I expect the image to be approximately constant contrast at background regions, but it is black, and edges are white. There are a lot of noise also, even after gauss filter. I filter image using gaussian filter and then apply laplace. I think what I want is done by a different way.

    Read the article

  • fft understanding

    - by maximus
    Can somebody give a good explanation of FFT image transform How the FFT transformed image and it's Re^2+Im^2 image can be analyzed? I just want to understand something when loiking to the image and it's frequency.

    Read the article

  • Laplacian of gaussian filter use

    - by maximus
    This is a formula for LoG filtering: Also in applications with LoG filtering I see that function is called with only one parameter: sigma(s). I want to try LoG filtering using that formula (previous attempt was by gaussian filter and then laplacian filter with some filter-window size ) But looking at that formula I can't understand how the size of filter is connected with this formula, does it mean that the filter size is fixed? Can you explain how to use it?

    Read the article

  • Moving items from one tableView to another tableView with extra's

    - by Totumus Maximus
    Let's say I have 2 UITableViews next to eachother on an ipad in landscape-mode. Now I want to move multiple items from one tableView to the other. They are allowed to be inserted on the bottom of the other tableView. Both have multiSelection activated. Now the movement itself is no problem with normal cells. But in my program each cell has an object which contains the consolidationState of the cell. There are 4 states a cell can have: Basic, Holding, Parent, Child. Basic = an ordinary cell. Holding = a cell which contains multiple childs but which wont be shown in this state. Parent = a cell which contains multiple childs and are shown directly below this cell. Child = a cell created by the Parent cell. The object in each cell also has some array which contains its children. The object also holds a quantityValue, which is displayed on the cell itself. Now the movement gets tricky. Holding and Parent cells can't move at all. Basic cells can move freely. Child cells can move freely but based on how many Child cells are left in the Parent. The parent will change or be deleted all together. If a Parent cell has more then 1 Child cell left it will stay a Parent cell. Else the Parent has no or 1 Child cell left and is useless. It will then be deleted. The items that are moved will always be of the same state. They will all be Basic cells. This is how I programmed the movement: *First I determine which of the tableViews is the sender and which is the receiver. *Second I ask all indexPathsForSelectedRows and sort them from highest row to lowest. *Then I build the data to be transferred. This I do by looping through the selectedRows and ask their object from the sender's listOfItems. *When I saved all the data I need I delete all the items from the sender TableView. This is why I sorted the selectedRows so I can start at the highest indexPath.row and delete without screwing up the other indexPaths. *When I loop through the selectedRows I check whether I found a cell with state Basic or Child. *If its a Basic cell I do nothing and just delete the cell. (this works fine with all Basic Cells) *If its a Child cell I go and check it's Parent cell immidiately. Since all Child cells are directly below the Parent cell and no other the the Parent's Childs are below that Parent I can safely get the path of the selected Childcell and move upwards and find it's Parent cell. When this Parent cell is found (this will always happen, no exceptions) it has to change accordingly. *The Parent cell will either be deleted or the object inside will have its quantity and children reduced. *After the Parent cell has changed accordingly the Child cell is deleted similarly like the Basic cells *After the deletion of the cells the receiver tableView will build new indexPaths so the movedObjects will have a place to go. *I then insert the objects into the listOfItems of the receiver TableView. The code works in the following ways: Only Basic cells are moved. Basic cells and just 1 child for each parent is moved. A single Basic/Child cell is moved. The code doesn't work when: I select more then 1 or all childs of some parent cell. The problem happens somewhere into updating the parent cells. I'm staring blindly at the code now so maybe a fresh look will help fix things. Any help will be appreciated. Here is the method that should do the movement: -(void)moveSelectedItems { UITableView *senderTableView = //retrieves the table with the data here. UITableView *receiverTableView = //retrieves the table which gets the data here. NSArray *selectedRows = senderTableView.indexPathsForSelectedRows; //sort selected rows from lowest indexPath.row to highest selectedRows = [selectedRows sortedArrayUsingSelector:@selector(compare:)]; //build up target rows (all objects to be moved) NSMutableArray *targetRows = [[NSMutableArray alloc] init]; for (int i = 0; i<selectedRows.count; i++) { NSIndexPath *path = [selectedRows objectAtIndex:i]; [targetRows addObject:[senderTableView.listOfItems objectAtIndex:path.row]]; } //delete rows at active for (int i = selectedRows.count-1; i >= 0; i--) { NSIndexPath *path = [selectedRows objectAtIndex:i]; //check what item you are deleting. act upon the status. Parent- and HoldingCells cant be selected so only check for basic and childs MyCellObject *item = [senderTableView.listOfItems objectAtIndex:path.row]; if (item.consolidatedState == ConsolidationTypeChild) { for (int j = path.row; j >= 0; j--) { MyCellObject *consolidatedItem = [senderTableView.listOfItems objectAtIndex:j]; if (consolidatedItem.consolidatedState == ConsolidationTypeParent) { //copy the consolidated item but with 1 less quantity MyCellObject *newItem = [consolidatedItem copyWithOneLessQuantity]; //creates a copy of the object with 1 less quantity. if (newItem.quantity > 1) { newItem.consolidatedState = ConsolidationTypeParent; [senderTableView.listOfItems replaceObjectAtIndex:j withObject:newItem]; } else if (newItem.quantity == 1) { newItem.consolidatedState = ConsolidationTypeBasic; [senderTableView.listOfItems removeObjectAtIndex:j]; MyCellObject *child = [senderTableView.listOfItems objectAtIndex:j+1]; child.consolidatedState = ConsolidationTypeBasic; [senderTableView.listOfItems replaceObjectAtIndex:j+1 withObject:child]; } else { [senderTableView.listOfItems removeObject:consolidatedItem]; } [senderTableView reloadData]; } } } [senderTableView.listOfItems removeObjectAtIndex:path.row]; } [senderTableView deleteRowsAtIndexPaths:selectedRows withRowAnimation:UITableViewRowAnimationTop]; //make new indexpaths for row animation NSMutableArray *newRows = [[NSMutableArray alloc] init]; for (int i = 0; i < targetRows.count; i++) { NSIndexPath *newPath = [NSIndexPath indexPathForRow:i+receiverTableView.listOfItems.count inSection:0]; [newRows addObject:newPath]; DLog(@"%i", i); //scroll to newest items [receiverTableView setContentOffset:CGPointMake(0, fmaxf(receiverTableView.contentSize.height - recieverTableView.frame.size.height, 0.0)) animated:YES]; } //add rows at target for (int i = 0; i < targetRows.count; i++) { MyCellObject *insertedItem = [targetRows objectAtIndex:i]; //all moved items will be brought into the standard (basic) consolidationType insertedItem.consolidatedState = ConsolidationTypeBasic; [receiverTableView.ListOfItems insertObject:insertedItem atIndex:receiverTableView.ListOfItems.count]; } [receiverTableView insertRowsAtIndexPaths:newRows withRowAnimation:UITableViewRowAnimationNone]; } If anyone has some fresh ideas of why the movement is bugging out let me know. If you feel like you need some extra information I'll be happy to add it. Again the problem is in the movement of ChildCells and updating the ParentCells properly. I could use some fresh looks and outsider ideas on this. Thanks in advance. *updated based on comments

    Read the article

  • How to post json data with extJS

    - by maximus
    Greeings: I'm a bit of a newb with both extJS and json. What is the most painless route to POSTing json data using extJS? I'm not really interested any GUI features, just using the framework to send some sample data.

    Read the article

  • Stripe suppression algorithm needed

    - by maximus
    I have images with text. There are dark stripes in image that still exists in binary image too. That makes characters connected with that stripe - it can be vertical or horizontal (or at some angle) I need to remove them from image at first, and then to binarize. I've seen bandpass filter in ImageJ program that have some options like - suppress horizontal stripes, and it works good, but it also apply a bandpass filtering. So any idea please how to do it. I think it should be done in frequency domain.

    Read the article

  • How to deal with RGB to YUV conversion

    - by maximus
    The formula says: Y = 0.299 * R + 0.587 * G + 0.114 * B; U = -0.14713 * R - 0.28886 * G + 0.436 * B; V = 0.615 * R - 0.51499 * G - 0.10001 * B; What if, for example, the U variable becomes negative? U = -0.14713 * R - 0.28886 * G + 0.436 * B; Assume maximum values for R and G (ones) and B = 0 So, I am interested in implementing this convetion function in OpenCV, So, how to deal with negative values? Using float image? anyway please explain me, may be I don't understand something..

    Read the article

  • Finding text orientation in image (angle for rotation)

    - by maximus
    There is an image captured by camera, and I need to find the angle of the text in order to rotate it to make the image better for OCR results. So I know that the fourier transform can be used for that purpose, My question is, does it really gives good results or may be it is better to use something different than that? Can you tell me if there is a good method for this purpose? I am afraid that not every image containing the text will give me a good result after using fourier transform method. Actually, if I make like it is written here: link text (see the part related with an example of text image) calculating the logarithm of the magnitude of the Fourier transform of image with text and then thresholding it, I get that points and I can calculate the line approximately passing through them, and after getting the line calculate the angle, and then make an affine transform, But, what if I do not get a good result every time using this method , and make a false transform? Any ideas please to judge wether the result is correct or not, or may be another method is better? The binary image can contain noise, even if there are not so much of them, the angle found as a result can be not accurate.

    Read the article

1 2 3  | Next Page >