Search Results

Search found 110 results on 5 pages for 'owen maresh'.

Page 1/5 | 1 2 3 4 5  | Next Page >

• Samba: share home directories when home directories are symbolic links

  - by Owen

  I have set up a new Ubuntu 9.10 system for five users. In the system is a large LVM volume where all the data is to be kept. The main system disk is not for this purpose, so I attempted to move the home directories using usermod -d /var/data/username -m And started creating my shares for these new home locations. But then I thought: hey, Samba has built-in home directory sharing! So I enabled that, and it didn't work. The shares were not published to the network. Only the share for user 'owen' was published; his folder hadn't been moved. So I thought: maybe Samba home sharing only works for default home locations, so how about I move the home directories back to where they were, and then make them symlinks. root@boxenmkiv:/home# ls -l total 4 lrwxrwxrwx 1 brett brett 25 2010-04-03 08:48 brett -> /var/data/brett/ lrwxrwxrwx 1 carly carly 23 2010-04-03 08:48 carly -> /var/data/carly/ lrwxrwxrwx 1 dave dave 21 2010-04-03 08:48 dave -> /var/data/dave/ lrwxrwxrwx 1 kate kate 23 2010-04-03 08:47 kate -> /var/data/kate/ drwxr-xr-x 4 owen owen 4096 2010-04-03 08:44 owen Like so. Still no go. The only users share which is published to the network is 'owen' who as you can see above has not had his home directory moved. I have also added the following to my smb.conf [global] follow symlinks = yes wide symlinks = yes unix extensions = no With no luck. Am I going about doing this the entirely wrong way? Should I just give up and manually create shares for the users? Thanks in advance.

  Read the article

• MySQL won't start or won't installed

  - by Owen

  Hi there, I'm trying to get a local LAMP setup on my Ubuntu desktop. I'm successfully got PHP install but I'm having trouble with MySQL If PHP tries to connet to MySQL I get this error: Warning: mysql_connect() [function.mysql-connect]: Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) in /var/www/testing.php on line 3 Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) If I try via command line I get much the same error: owen@desktop:~$ mysql ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (13) Weirdly "/var/run/mysqld" does not exist. Running a whereis command I get the following: owen@desktop:~$ whereis mysqld.sock mysqld: /usr/sbin/mysqld /usr/share/man/man8/mysqld.8.gz So is MySQL even installed? Well acording to dpkg owen@desktop:~$ dpkg -l | grep mysql ii libapache2-mod-auth-mysql 4.3.9-13ubuntu1 Apache 2 module for MySQL authentication ii libdbd-mysql-perl 4.016-1 Perl5 database interface to the MySQL database ii libmysqlclient15off 5.1.30really5.0.83-0ubuntu3 MySQL database client library ii libmysqlclient16 5.1.49-1ubuntu8.1 MySQL database client library ii mysql-admin 5.0r14+openSUSE-2.1 GUI tool for intuitive MySQL administration ii mysql-client-5.1 5.1.49-1ubuntu8.1 MySQL database client binaries ii mysql-client-core-5.1 5.1.49-1ubuntu8.1 MySQL database core client binaries ii mysql-common 5.1.49-1ubuntu8.1 MySQL database common files, e.g. /etc/mysql/my.cnf ii mysql-gui-tools-common 5.0r14+openSUSE-2.1 Architecture independent files for MySQL GUI Tools ii mysql-query-browser 5.0r14+openSUSE-2.1 Official GUI tool to query MySQL database ii mysql-server 5.1.49-1ubuntu8.1 MySQL database server (metapackage depending on the latest version) ii mysql-server-5.1 5.1.49-1ubuntu8.1 MySQL database server binaries and system database setup ii mysql-server-core-5.0 5.1.30really5.0.83-0ubuntu3 MySQL database core server files ii mysql-server-core-5.1 5.1.49-1ubuntu8.1 MySQL database server binaries ii php5-mysql Can someone please help I'm really confused as what to do next. I'm not a Linux expert at all most of these commands I've ran I found of diffrent blogs and help forums.

  Read the article

• per terminal bell in ubuntu classic

  - by Owen Maresh

  I'm using natty. I'm using classic. I use raw xterms (the latest build, 270, in fact). I've done xset b 100 pactl upload-sample /usr/share/sounds/ubuntu/stereo/message.ogg bell.ogg But I want something more fine grained than this: I want to say "if the bell originated in some particular pseudoterminal make a particular sound, but if it originated in some other particular pseudoterminal, generate some other sound"

  Read the article

• How can I set a per terminal bell with xterms?

  - by Owen Maresh

  I'm using natty. I'm using classic. I use raw xterms (the latest build, 270, in fact). I've done xset b 100 pactl upload-sample /usr/share/sounds/ubuntu/stereo/message.ogg bell.ogg But I want something more fine grained than this: I want to say "if the bell originated in some particular pseudoterminal make a particular sound, but if it originated in some other particular pseudoterminal, generate some other sound"

  Read the article

• Beginner question - Loop invariants (Specifically Ch.3 of "Accelerated C++")

  - by Owen

  Hi - as I said, a complete beginner question here. I'm currently working my way through "Accelerated C++" and just came across this in chapter 3: // invariant: // we have read count grades so far, and // sum is the sum of the first count grades while (cin >> x) { ++count; sum += x; } The authors follow this by explaining that the invariant needs special attention paid to it because when the input is read into the variable x, we will have read count+1 grades and thus the invariant will be untrue. Similarly, when we have incremented the counter, the variable sum will no longer be the sum of the last count grades (in case you hadn't guessed, it's the traditional program for calculating student marks). What I don't understand is why this matters. Surely for just about any other loop, a similar statement would be true? For example, here is the book's first while loop (the output is filled in later): // invariant: we have written r rows so far while (r != rows) { // write a row of output std::cout << std::endl; ++r; } Once we have written the appropriate row of output, surely the invariant is false until we have incremented r, just as in the other example? It's probably something really obvious, anyone could enlighten me as to what makes these two cases different, that'd be great - and thanks in advance for taking the time to answer such a complete novice question. Owen

  Read the article

• Upgrading Agent Controllers

  - by Owen Allen

  There was an update for Oracle Solaris Agents not too long ago. Over on the Oracle Enterprise Manager blog, Steve Stelting has put together a detailed walkthrough for upgrading your environment. It covers downloading the Agent update, seeing what Agents need to be upgraded, and performing the upgrade itself Speaking of which, the Oracle Enterprise Manager blog often has in-depth posts about Ops Center, so it's well worth a look if you don't follow it.

  Read the article

• How do I point a new domain to start on a page that's not index.html on separate hosting? [closed]

  - by Owen Campbell-Moore

  Possible Duplicate: How do I point a new domain to start on a page that's not index.html on separate hosting? I'm using a service called SquareSpace to host my site, and today I'm registering the domain for it. Basically, how do I make it so when somebody types www.tedxoxford.com it points at http://www.tedxoxford.com/landing (currently http://tedxoxford.squarespace.com/landing) instead of the default index? Is this possible? Squarespace is quite a restricted CMS and means that your logos etc all point to the index so I don't want people ending up on my landing/splash page every time they want the home page, only on the first time they type in the URL. A dirty hack would be to check the refferer and redirect anyone hitting the index to the landing page, but that's a lot of loading overhead I'd rather avoid...

  Read the article

• Provisioning Videos

  - by Owen Allen

  There are a couple of new videos up on the Oracle Learning Youtube channel about Ops Center's provisioning capabilities. Simon Hayler does a walkthrough of a couple of different procedures. The first video shows you how to provision Oracle Solaris zones. It explains how to create an Oracle Solaris Zone profile, and then how to apply it (using a deployment plan) to a target system. The second video shows you how to provision an x86 server with Oracle Solaris. This uses a very similar process - you create a OS provisioning profile, then use a deployment plan to apply it to the target hardware. The documentation goes over OS provisioning and zone creation in the Feature Guide, if you're looking for additional information.

  Read the article

• Migrating an LDOM from a T4 to a T5

  - by Owen Allen

  I got a question about LDoms: "Is there any restriction against migrating LDoms between the T4 and T5 platforms?" The only restriction is that, at present, you can't do a live migration. However, with Ops Center 12.1.4, you can put T4 and T5s together in a Server Pool and either manually migrate the LDoms to a new host or configure them for automated cold-migration failover. Take a look at the Server Pool and Oracle VM Server for SPARC chapters for more information.

  Read the article

• Article about Sun ZFS Storage Appliances

  - by Owen Allen

  Sun ZFS Storage Appliances are versatile storage systems. Discovering and managing them in Ops Center, though, makes them even more versatile. If you discover a Sun ZFS Storage Appliance in Ops Center 12c, you can create iSCSI and Fibre Channel LUNS, and make the LUNs available to server pools and virtualization hosts as a storage library. Barbara Higgins has written an excellent article that walks you through the process of setting up a Sun ZFS Storage Appliance and discovering and managing it in Ops Center. If you're looking into ways to make a Sun ZFS Storage Appliance work for you, it's worth a look.

  Read the article

• Workflow: Operate Zones

  - by Owen Allen

  The Operate Zones workflow is another of the workflow documents that we introduced recently. It follows naturally after the Deploy Oracle Solaris 11 Zones workflow that I talked about last week, so I thought I'd talk about it next. This workflow is less linear than the zone deployment workflow. It's built around this image: The left side shows you the prerequisites for zone operation: you have to deploy libraries and deploy either Oracle Solaris 10 or 11 zones - whichever type you want to manage using this workflow. Once you have the zones deployed, you can begin to operate them. If you want to associate resources with the global zone, the workflow directs you to the Exploring Your Server Pools how-to, which talks about adding global zones to server pools and associating libraries and network resources with them. Otherwise, it directs you to a set of how-tos about zone management: Managing the Configuration of a Zone, which explains how to add storage, edit zone attributes, and connect zones to networks; Lifecycle Management of Zones, which explains how to halt, shut down, boot, reboot, or delete a zone; and Migrating Zones, which explains how to move a zone to a new global zone in the same server pool. Finally, it directs you to the Update Oracle Solaris workflow when you want to update your zones, and to the Monitor and Manage Incidents workflow to learn more about monitoring your assets.

  Read the article

• How To: Use Monitoring Rules and Policies

  - by Owen Allen

  One of Ops Center's most useful features is its asset monitoring capability. When you discover an asset - an operating system, say, or a server - a default monitoring policy is applied to it, based on the asset type. This policy contains rules that specify what properties are monitored and what thresholds are considered significant. Ops Center will send a notification if a monitored asset passes one of the specified thresholds. But sometimes you want different assets to be monitored in different ways. For example, you might have a group of mission-critical systems, for which you want to be notified immediately if their file system usage rises above a specific threshold. You can do so by creating a new monitoring policy and applying it to the group. You can also apply monitoring policies to individual assets, and edit them to meet the requirements of your environment. The Tuning Monitoring Rules and Policies How-To walks you through all of these procedures.

  Read the article

• Agent versus Agentless management

  - by Owen Allen

  I got a couple of questions about Agentless asset management: "What does agentless management do for an asset?" Agentless management is one of the two ways that you can manage an operating system. Rather than installing an Agent Controller on the OS, agentless management uses SSH to regularly check the system and gather monitoring data. Many of the actions that would be available on an agent-managed system are available on an agentless system, but actions such as running reports or updating an Oracle Solaris 10 or Linux OS are not available. A table showing the capabilities of agentless management is here. "What permissions does agentless management require?" Agentless management still requires root credentials. If you can't log into the system as root, you can provide one set of credentials for the login, and then a set of root credentials to switch to.

  Read the article

• 3 language website using subdomains and mapped domains. Add subdomains or mapped domains to WMT?

  - by Owen Mclaughlin

  I have a new wordpress multisite setup. Main language Italian and 2 subdomains using en and de for english and german. There is no auto translation plugins being used. The wordpress theme being used is by Studiopress.com and have SEO built in. I am a little confused as which domains to use in Webmasters Tools. If I use the subdomains (en and de) which have the seo setup, then google will index and show the en.example.it wont know about the mapped domains or display them. If I use the mapped domains then won't google not see the seo for the subdomains. I am muddled with this. What do??

  Read the article

• How do I point a new domain to start on a page that's not index.html on separate hosting?

  - by Owen Campbell-Moore

  I'm using a service (CMS/Host) called SquareSpace to host my site, and today I'm registering the domain for it. Basically, how do I make it so when somebody types www.tedxoxford.com it points at http://www.tedxoxford.com/landing (currently http://tedxoxford.squarespace.com/landing) instead of the default index? Is this possible? Squarespace is quite a restricted CMS and means that your logos etc all point to the index so I don't want people ending up on my landing/splash page every time they want the home page, only on the first time they type in the URL. A dirty hack would be to check the refferer and redirect anyone hitting the index to the landing page, but that's a lot of loading overhead I'd rather avoid...

  Read the article

• Ops Center zip documentation

  - by Owen Allen

  If you're operating in a dark site, or are otherwise without easy access to the internet, it can be tricky to get access to the docs. The readme comes along with the product, but that's not exactly the same as the whole doc library. Well, we've put a zip file with the whole doc library contents up on the main doc page. So, if you are in a site without internet access, you can get the zip, extract it, and have a portable version of the site, including the pdf and html versions of all of the docs.

  Read the article

• Using Asset Groups

  - by Owen Allen

  I got a question about putting assets in groups: "I'm planning on installing some agents manually on existing systems, and I want to have them put in a specific asset group once they're discovered. I don't see any way to tell the install script to put the asset in a group. How can I add the assets to a group, either through the UI or the CLI?" There are a few ways. In the CLI, you can use groups mode, and use this command to add an asset to a group: attach -n| --gear <asset name> -g| --group <group> You can also use -U| --uuid <UUID> to specify the asset if you have multiple assets with the same name. In the UI, you have a couple of options. You can select an asset and click Add Asset to Group to add it to a group you select. Alternatively, if you're trying to make a group for assets with a specific characteristic, you can specify rules that will automatically add assets to a group based on that characteristic.

  Read the article

• OS Analytics Post and Discussion

  - by Owen Allen

  Eran Steiner has written an interesting piece over on the Enterprise Manager blog about the OS Analytics feature of Ops Center. OS Analytics gives you a huge amount of information about the characteristics of managed operating systems and lets you track changes to these characteristics over time. Take a look; it's a useful feature. The OS Analytics feature is also the subject of the community call this week (Eran is leading that one too). It's at 11 am EST. To join the conference: Go to https://oracleconferencing.webex.com/oracleconferencing/j.php?ED=209833067&UID=1512092402&PW=NY2JhMmFjMmFh&RT=MiMxMQ%3D%3D If requested, enter your name and email address. If a password is required, enter the meeting password: oracle123 Click Join. To dial into the conference, dial 1-866-682-4770 (US/Canada) or go here for the numbers in other countries. The conference code is 7629343# and the security code is 7777#.

  Read the article

• Building a virtualized SPARC environment

  - by Owen Allen

  If you're interested in making effective use of virtualization tools like Oracle VM Server, there's a whitepaper on oracle.com that you should check out. The whitepaper starts with a few specific technologies and hardware: Oracle VM Server for SPARC, T4 Servers, Ops Center, Solaris 11, Sun Network 10GbE Switches, and Sun ZFS Storage Appliances. It then explains how to use them to plan and set up a virtualized environment, in which guests are grouped in Server Pools with high availability and are managed through Ops Center. It explains how Ops Center simplifies the management of logical domains by using custom plans to create new logical domains and managing their life cycle through its user interface. So, if you're interested in setting up a cloud and you want to avoid surprises along the way, have a look.

  Read the article

• Is unit testing or test-driven development worthwhile?

  - by Owen Johnson

  My team at work is moving to Scrum and other teams are starting to do test-driven development using unit tests and user acceptance tests. I like the UATs, but I'm not sold on unit testing for test-driven development or test-driven development in general. It seems like writing tests is extra work, gives people a crutch when they write the real code, and might not be effective very often. I understand how unit tests work and how to write them, but can anyone make the case that it's really a good idea and worth the effort and time? Also, is there anything that makes TDD especially good for Scrum?

  Read the article

• Provisioning Oracle Solaris 11

  - by Owen Allen

  OS Provisioning is one of the major features of Ops Center. You can set up an OS provisioning plan and profile, which specify how an OS is deployed, and then use them to create new operating systems on any number of systems. Oracle Solaris 11 works a bit differently than older versions of Oracle Solaris, though, and even if you've done OS provisioning before you might have some questions about how to provision it. The Provisioning Oracle Solaris 11 OS how-to walks you through discovering the target hardware, creating a simple OS provisioning plan and profile, and launching a job to provision an OS. There's further information in the Provisioning Operating Systems section of the Feature Guide.

  Read the article

• Discovering Assets on Multiple Subnets

  - by Owen Allen

  I saw this question recently, about making discovery work: "I am attempting to discover a group of ILOMs which seem to be on a different subnet than their hosts. When I try to discover the ILOMs, Ops Center can't find them. Is it a requirement that the ILOM and its host should be on the same subnet?" The short answer is no, related assets don't have to be on the same subnet for you to discover them. The correlation between related assets doesn't depend on them being on the same subnet. What's likely going on, if you're running into similar issues, is that the subnet where you're trying to discover systems needs to be associated with a Proxy Controller that can reach it. You can go here to see how to associate a network with a Proxy Controller. Once the network is associated with a Proxy Controller, you should be able to discover and manage assets on it.

  Read the article

• Workflow: Deploy Oracle Solaris 11 Zones

  - by Owen Allen

  One of the new workflows that we've introduced, which is a pretty good example of what workflows can do for you, is the Deploy Oracle Solaris 11 Zones workflow. This workflow was designed to show you everything you need to do in order to create and manage an environment with zones. It tells you what roles are needed, and it shows you the process using this image: The left side shows you the prerequisites for deploying Oracle Solaris 11 Zones - you need to have Ops Center configured on Oracle Solaris 11, have your libraries set up, and have your hardware ready to go. Once you've done that, you can begin the workflow. If you haven't provisioned Oracle Solaris 11, you do so, then create one or more zones, and create a server pool for those zones. Each one of these steps has an existing How-To, which walks you through the process in detail, and the final step of the workflow directs you to the next workflow that you're likely to be interested in - in this case, the Operating Zones workflow.

  Read the article

• Asset displays in the UI

  - by Owen Allen

  I've seen a little bit of confusion about how the UI displays assets and asset information, so I thought I'd explain how information and actions are displayed.  In Ops Center, operating systems, servers, zones, Oracle VM Servers, and anything else that you can manage are called assets. When you discover them, Ops Center puts together a model in the navigation pane that shows the relationships between the assets. For example: This tree shows three servers, and the Operating Systems on each one. If one of the operating systems was a global zone, we'd see the non-global zones beneath the global zone as well. However, when you select an asset, the info in the center pane and the actions in the actions pane are the ones that apply to that specific asset, and not to its related assets. If you select a server, for example, you'll see service request info and have the option to provision a new OS. If you select an existing OS, you'll see file system information and have the option to update the OS. Actions that apply directly to the hardware aren't visible from the OS view, and vice versa.

  Read the article

• Ops Center 12.1.4 Released

  - by Owen Allen

  Ops Center version 12.1.4.0.0, an update for 12c, has just been released. There are a few new features. The biggest one is support for multiple Automated Installer install services, which means that you can provision any version of Oracle Solaris 11, rather than just one. We've also added support for multi-file VM templates, and enhanced the network configuration support for vServers. You can take a look at the What's New document for more information about the new features. If you're already using Ops Center, you can download the 12.1.4 upgrade through the UI, or get it from the Oracle Tech Network or from e-delivery. The Upgrade chapter in the Admin Guide explains how to perform the upgrade.

  Read the article

1 2 3 4 5  | Next Page >