Search Results

Search found 1450 results on 58 pages for 'exhaust fan'.

Page 10/58 | < Previous Page | 6 7 8 9 10 11 12 13 14 15 16 17  | Next Page >

  • System shuts down immediately after few sconds

    - by Anil
    I have a computer with following specification and was working fine after re-installing the system and refitting sink fan unit. Recently it shuts down automatically after a few seconds. I checked PSU by shorting pin no.s 13 & 14 as well as 14 & 15. It worked well means the PSU fan moves. But I never checked the voltages at different wires. I refitted the heat sink fan by applying thermal paste. but it behaved the same. Again I refitted the Heat Sink Fan, then it worked for 2 minutes and again shut down. Now it shuts down immediately after switching on. Mother board : M26GTM-3VP CPU : AMD athlon PSU : 450 watt Can anyone help?

    Read the article

  • Can I have damaged a CPU ?

    - by Pascal
    Hey guys, This is a question I asked on Anantech forums, but I just discovered this community and think this question would fit right in. Here goes: I built a PC around a Q9550 1 1/2 years ago (MoBo is an Asus P5Q deluxe). Specs give 2.83GHz, OC'ed it to 3.40 GHZ without any problem (or so I thought) till 2 months ago. Cooling is provided by stock Intel Fan... 2 Months ago, I began to see random crashes, bios saying CPU overheat error... PC would reboot at OC'ed speed without any problem. Since last saturday and a few more crashes, PC won't reboot at 3.40 GHz, and even at stock speed (2.83 GHz), I got core temperatures of (60 C idle, 95 C under load) on the first two cores. This is the 4 core temperatures I am talking about, not the T-CPU which obvioulsy is lower. Fan is running at a steady 2000 RPM. Questions for you : 1. Is 2000 RPM the normal speed of the Intel fan or is my fan somehow broken (which could explain the overheating). In this case, any recommendation for a good fan for OCing ? 2. Hypothesis I fear is the right one: can the CPU have been slowly damaged over time by this OCing, meaning there is nothing much to do except waiting for it to die ? (As a side note, I am surprised that the 9550 is still around 300 $CDN here... Thought it would have been cheaper with all those i3/i5/i7 around). Any help or advice would be more than welcome...

    Read the article

  • Computer makes hissing noise, turns off after few seconds

    - by Kaustubh P
    I have a problem similar to the questions posted here and here. This is my config: Asus M3N78-EM, with AMD Phenom X3 720 2800 Black Edition, 4GB Transcend DDR2 RAM, Nvidia 9400GT. HD is a 160 GB IDE, and a LG IDE DVD-ROM. The power button is a bit off, I have removed the cover of the switch, and the only way it turns on is just giving the "stick" under the cover a gentle press. It turns on sometimes, and at other times, I have to cut-off the power from the PSU, and try again. I will describe my problem in as detail as possible, please bear with me: The problem has started in the last week, a few months after I changed the to the powerswitch arrangement as described above. The PC makes a hissing noise, and I wasn't able to pin-point the noise source, because of the various other fans. At first, removing the HD, rebooting w/o the HD, turning it off, reconnecting and booting made the problem go away. But of late, it doesn't happen. As suggested in the other questions, I tried reducing the load by disconnecting both the IDE drives, and the problem (noise + turn-off) still occurs. I also connected another 80G IDE HD,today morning, adn it still made that noise, and turned off. I also opened up the PSU, but I couldn't see any fault in that, I tried rotating the fan by blowing into the blades, and with my fingers, but the hissing noise didn't come from there. Or maybe the speed wasn't enough to evoke that noise. A few weeks ago: I had cleaned the Cabinet and had repasted the processor and its fan using some thermal paste. Could that be at fault? I also used a vacuum to blow the dust out of the PSU, could the power have been too much, to maybe offset the fan or something? A label on the PSU says it uses a ball-bearing fan. That only leaves me with the Processor fan and the processor itself. I didn't try removing the processor fan and processor from the motherboard, and then turning the PC on, fearing damage. Will doing so cause any damage? What can I do to localize and pin-point the problem? Also, after a few tries, the Computer starts up. Sometimes it turns of within 2 seconds, sometimes after the POST. Once it turned off at the grub. Another time it booted completely and then turned off. The only way to ensure that the PC wont turn off, is if the hissing noise stops. EDIT: I suspect it to be the Processor/Processor fan, owing to the source of noise. All the config, except for the Cabinet, is just over a year old. EDIT2: I also just remembered, that I had set the "On-power resume" to turn on, i.e. If I supply he PC with power, it will turn itself on, w/o me needing to press the switch. I had done that to workaround the faulty power-switch, as noted above. EDIT3: I calculated the power my system needs, from the antec site, and I just arrived at 292W

    Read the article

  • Power management issues on an Asus N55

    - by Andrea Borga
    I noticed that with respect to Win7 on my Asus N55 Ubuntu 12.04 tend to overheat the system. After startup the fan controller takes control of the fan, I could here it slowing down, after a few second following a login the fan increases its speed again. Though there are no processor hungry process: top shows only Xorg consuming 4%. Even with the system monitor the CPUs load look ok. Is it a power management related problem? This can cause battery life troubles in general, and electronics is never happy to be overheated. Is there a better tool to root the cause of the issue?

    Read the article

  • Build Your Own CE6 Kernel

    - by Kate Moss' Big Fan
    The Share Source Program in Windows CE provides many modules in %_WINCEROOT%\Private\ tree, and the kernel is one of them! Although it is not full source of kernel but it is good enough for tracing it, even tweak the kernel. Tracing the kernel and see how it works is lots of fun, but it is fascinated to modify and verify the change you made. So first comes first, where is the source of kernel? It's in your %_WINCEROOT%\private\winceos\COREOS\nk\ And next question will be "How do I build it?", Some of you may say just "build -c" there and it should be good. If you are the owner of kernel and got full source, that is definitely the right answer, but none of them are applied to our case though. So what should I do? Let's dig deeper into the coreos\nk folder, there are a couples of subfolder, CELOG, KDSTUB, KERNEL and etc. KERNEL\ is the main component of kernel.dll, in the other word, most of the modify to kernel is going to happen here. And the good thing is, you could "build -c" in %_WINCEROOT%\private\winceos\COREOS\nk\kernel\ with no error at all. But before doing that, remember to backup eveything you are going to modify, including the source and binaries; remember, this is not something belong to you, and if you didn't restore them back later, it could end up confuse the subsequence QFE updates! Here is the steps Backup the source code, I will suggest the whole %_WINCEROOT%\private\winceos\COREOS\nk\ Backup the binaries in common\oak\lib\, and again if you are not sure which files, backup the whole %_WINCEROOT%\common\oak\lib\ is the safest way. Do whatever modification you want in %_WINCEROOT%\private\winceos\COREOS\nk\kernel\ build -c in %_WINCEROOT%\private\winceos\COREOS\nk\kernel If everything went well so far, you should get a new nkmain.lib,nkmain.pdb, nkprmain.lib and nkprmain.pdb in %_WINCEROOT%\public\common\oak\lib\%_TGTCPU%\%WINCEDEBUG%\ Basically, you just rebuild your new kernel, the rest is to "blddemo clean -q" to have your new kernel SYSGEN'd and include in your OS Image. Or just "set WINCEREL=1" then "sysgen -p common nk nkprof" and "makeimg" if you can't wait another minutes for "blddemo clean -q" Tat sounds good, but some of you may not like the idea to alter any code in private folder, and not to mention how annoying to backup/restore files every time. Better idea? Yes, Microsoft provides a tool SYSGEN_CAPTURE (http://msdn.microsoft.com/en-us/library/ee504678.aspx for detail and usage) to creates Sources files for public drivers that you want to modify and build in your platform directory. In fact, not only public drivers, virtually anything in the %_WINCEROOT%\public\<project name>\cesysgen\makefile can be captured, and of course including kernel. So I am going to introduce a second way to build your own kernel by using SYSGEN_CAPTURE tool. Again the steps Create a folder in your BSP for building kernel, says %_TARGETPLATROOT%\SRC\Kernel. Use "SYSGEN_CAPTURE -p common nk" and then you will get a SOURCES.KERN, you could also "SYSGEN_CAPTURE -p common nkprof" to generate profiler enabled kernel. rename the SOURCE.KERN to SOURCES and copy one of the sample makefile into your kernel directory. For example the one in PRIVATE\WINCEOS\COREOS\NK\KERNEL\NKNORMAL. Copy the source files you want to modify from private\winceos\coreos\nk\kernel\ into your kernel directory. Modifying the SOURCES= macro to the source files you addes in step 4. For example, if you copied the vm.c, it is going to be SOURCES=vm.c Refer to the private\winceos\COREOS\nk\kernel\sources.inc and add macro defines and proper include path in your SOURCES file. "set WINCEREL=1", "build -c" in your kernel directory and "makeimg", voila! Here is an example for the MACROS you need to add in x86 Here are the macros for x86 CDEFINES=$(CDEFINES) -DIN_KERNEL -DWINCEMACRO -DKERN_CORE # Machine independent defines CDEFINES=$(CDEFINES) -DDBGSUPPORT _COREOSROOT=$(_WINCEROOT)\private\winceos\coreos INCLUDES=$(_COREOSROOT)\inc;$(_COREOSROOT)\nk\inc !IFDEF DP_SETTINGS CDEFINES=$(CDEFINES) -DDP_SETTINGS=$(DP_SETTINGS) !ENDIF ASM_SAFESEH=1 CDEFINES=$(CDEFINES) -Gs100000 -DENCODE_GS_COOKIE

    Read the article

  • How do I get a Canon MG, MP and MX series USB printer working?

    - by Old-linux-fan
    Printer MP6150 driver installed itself upon plugging in the printer. Printer is recognized (lsusb shows it) but does not mount. If the printer is recognized, the driver must be working (or?), but something is blocking the system from mounting the printer. Tried the usual things: power of printer, restart Ubuntu etc. Listed below result of lsusb and fstab: hans@kontor-linux:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 004: ID 04a9:174a Canon, Inc. Bus 002 Device 002: ID 1058:1001 Western Digital Technologies, Inc. External Hard Disk [Elements] Bus 004 Device 002: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser hans@kontor-linux:~$ sudo cat /etc/fstab [sudo] password for hans: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda6 during installation UUID=eaf3b38d-1c81-4de9-98d4-3834d674ff6e / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=93a667d3-6132-45b5-ad51-1f8a46c5b437 none swap sw 0 0 Here is what I have tried: Tried the HK link again, but no luck so far. However, I connected the printer wirelessly to router on other xp box. Installing the driver from ppa:michael-gruz/canon doesn't work, but the driver is installed

    Read the article

  • Override an IOCTL Handler in PQOAL

    - by Kate Moss' Big Fan
    When porting or creating a BSP to a new platform, we often need to make change to OEMIoControl or HAL IOCTL handler for more specific. Since Microsoft introduced PQOAL in CE 5.0 and more and more BSP today leverages PQOAL to simplify the OAL, we no longer define the OEMIoControl directly. It is somehow analogous to migrate from pure Windows SDK to MFC; people starts to define those MFC handlers and forgot the WinMain and the big message loop. If you ever take a look at the interface between OAL and Kernel, PUBLIC\COMMON\OAK\INC\oemglobal.h, the pfnOEMIoctl is still there just as the entry point of Windows Program is WinMain since day one. (For those may argue about pfnOEMIoctl is not OEMIoControl, I will encourage you to dig into PRIVATE\WINCEOS\COREOS\NK\OEMMAIN\oemglobal.c which initialized pfnOEMIoctl to OEMIoControl. The interface is just to split OAL and Kernel which no longer linked to one executable file in CE 6, all of the function signature is still identical) So let's trace into PQOAL to realize how it implements OEMIoControl and how can we override an IOCTL handler we interest. First thing to know is the entry point (just as finding the WinMain in MFC), OEMIoControl is defined in PLATFORM\COMMON\SRC\COMMON\IOCTL\ioctl.c. Basically, it does nothing special but scan a pre-defined IOCTL table, g_oalIoCtlTable, and then execute the handler. (The highlight part) Other than that is just for error handling and the use of critical section to serialize the function. BOOL OEMIoControl(     DWORD code, VOID *pInBuffer, DWORD inSize, VOID *pOutBuffer, DWORD outSize,     DWORD *pOutSize ) {     BOOL rc = FALSE;     UINT32 i; ...     // Search the IOCTL table for the requested code.     for (i = 0; g_oalIoCtlTable[i].pfnHandler != NULL; i++) {         if (g_oalIoCtlTable[i].code == code) break;     }     // Indicate unsupported code     if (g_oalIoCtlTable[i].pfnHandler == NULL) {         NKSetLastError(ERROR_NOT_SUPPORTED);         OALMSG(OAL_IOCTL, (             L"OEMIoControl: Unsupported Code 0x%x - device 0x%04x func %d\r\n",             code, code >> 16, (code >> 2)&0x0FFF         ));         goto cleanUp;     }            // Take critical section if required (after postinit & no flag)     if (         g_ioctlState.postInit &&         (g_oalIoCtlTable[i].flags & OAL_IOCTL_FLAG_NOCS) == 0     ) {         // Take critical section                    EnterCriticalSection(&g_ioctlState.cs);     }     // Execute the handler     rc = g_oalIoCtlTable[i].pfnHandler(         code, pInBuffer, inSize, pOutBuffer, outSize, pOutSize     );     // Release critical section if it was taken above     if (         g_ioctlState.postInit &&         (g_oalIoCtlTable[i].flags & OAL_IOCTL_FLAG_NOCS) == 0     ) {         // Release critical section                    LeaveCriticalSection(&g_ioctlState.cs);     } cleanUp:     OALMSG(OAL_IOCTL&&OAL_FUNC, (L"-OEMIoControl(rc = %d)\r\n", rc ));     return rc; }   Where is the g_oalIoCtlTable? It is defined in your BSP. Let's use DeviceEmulator BSP as an example. The PLATFORM\DEVICEEMULATOR\SRC\OAL\OALLIB\ioctl.c defines the table as const OAL_IOCTL_HANDLER g_oalIoCtlTable[] = { #include "ioctl_tab.h" }; And that leads to PLATFORM\DEVICEEMULATOR\SRC\INC\ioctl_tab.h which defined some of IOCTL handler but others are defined in oal_ioctl_tab.h which is under PLATFORM\COMMON\SRC\INC\. Finally, we got the full table body! (Just like tracing MFC, always jumping back and forth). The format of table is very straight forward, IOCTL code, Flags and Handler Function // IOCTL CODE,                          Flags   Handler Function //------------------------------------------------------------------------------ { IOCTL_HAL_INITREGISTRY,                   0,  OALIoCtlHalInitRegistry     }, { IOCTL_HAL_INIT_RTC,                       0,  OALIoCtlHalInitRTC          }, { IOCTL_HAL_REBOOT,                         0,  OALIoCtlHalReboot           }, The PQOAL scans through the table until it find a matched IOCTL code, then invokes the handler function. Since it scans the table from the top which means if we define TWO handler with same IOCTL code, the first one is always invoked with no exception. Now back to the PLATFORM\DEVICEEMULATOR\SRC\INC\ioctl_tab.h, with the following table { IOCTL_HAL_INITREGISTRY,                   0,  OALIoCtlDeviceEmulatorHalInitRegistry     }, ... #include <oal_ioctl_tab.h> Note the IOCTL_HAL_INITREGISTRY handler are defined in both BSP's local ioctl_tab.h and the common oal_ioctl_tab.h, but due to BSP's local handler comes before "#include <oal_ioctl_tab.h>" so we know the OALIoCtlDeviceEmulatorHalInitRegistry always get called. In this example, the DeviceEmulator BSP overrides the IOCTL_HAL_INITREGISTRY handler from OALIoCtlHalInitRegistry to OALIoCtlDeviceEmulatorHalInitRegistry by manipulating the g_oalIoCtlTable table. (In some point of view, it is similar to message map in MFC) Please be aware, when you override an IOCTL handler in PQOAL, you may want to clone the original implementation to your BSP and change to meet your need. It is recommended and save you the redundant works but remember to rename the handler function (Just like the DeviceEmulator it changes the name of OALIoCtlHalInitRegistry to OALIoCtlDeviceEmulatorHalInitRegistry). If you don't change the name, linker may not be happy (due to name conflict) and the more important is by using different handler name, you could always redirect the handler back to original one. (It is like the concept of OOP that calling a function in base class; still not so clear? I am goinf to show you soon!) The OALIoCtlDeviceEmulatorHalInitRegistry setups DeviceEmulator specific registry settings and in the end, if everything goes well, it calls the OALIoCtlHalInitRegistry (PLATFORM\COMMON\SRC\COMMON\IOCTL\reginit.c) to do the rest.     if(fOk) {         fOk = OALIoCtlHalInitRegistry(code, pInpBuffer, inpSize, pOutBuffer,             outSize, pOutSize);     } Now you got the picture, whenever you want to override an IOCTL hadnler that is implemented in PQOAL just Clone the handler function to your BSP as a template. Simple name change for the handler function, and a name change in the IOCTL table header file that maps the IOCTL with the function Implement your IOCTL handler and whenever you need to redirect it back just calling the original handler function. It is the standard way of implementing a custom IOCTL and most Microsoft developers prefer. The mapping of IOCTL routine to IOCTL code is platform specific - you control the header file that does that mapping.

    Read the article

  • Canon MG6100 series USB printer receives job but doesn't physically print

    - by Old-linux-fan
    Printer MP6150 driver installed itself upon plugging in the printer. Printer is recognized (lsusb shows it) but does not mount. If the printer is recognized, the driver must be working (or?), but something is blocking the system from mounting the printer. Tried the usual things: power of printer, restart Ubuntu etc. Listed below result of lsusb and fstab: hans@kontor-linux:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 004: ID 04a9:174a Canon, Inc. Bus 002 Device 002: ID 1058:1001 Western Digital Technologies, Inc. External Hard Disk [Elements] Bus 004 Device 002: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser hans@kontor-linux:~$ sudo cat /etc/fstab [sudo] password for hans: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda6 during installation UUID=eaf3b38d-1c81-4de9-98d4-3834d674ff6e / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=93a667d3-6132-45b5-ad51-1f8a46c5b437 none swap sw 0 0

    Read the article

  • ATI RS690m X1200 proprietary driver installation

    - by fan-dz
    I've installed Ubuntu 11.10 on my emachine e625 AMD64 (TF-20) with an ATI RS690m X1200 graphics card but I didn't have 3D acceleration. The open-source driver works, except for any video effects or acceleration… I've downloaded the driver from ATI and followed the installation instructions and here is the result: Error: ./default_policy.sh does not support version default:v2:x86_64:lib32::none:3.0.0-17-generic; make sure that the version is being correctly set by --iscurrentdistro What did I do wrong?

    Read the article

  • Need some help on tomcat URL mod_rewrite or mod_jk

    - by Redbull Fan
    I am trying to remove the context name from the url of my server. Current URL - http://www.domainname.com/MyApp/ What I need to make is to make it avaialble at - www.domainname.com/ So it is only going to host one main app and that needs to be displayed when we open www.domainname.com/ on browser. I have already tried couple of things like below - RewriteEngine On RewriteCond %{REQUEST_URI} !^/(Context/.*)$ RewriteRule ^/(.*)$ /Context/$1 [P,L] OR redirect permanent /MyApp/ abcd://domainname.com OR Using JKMount - JkMount /MyApp/* ajp13 JkMount /MyApp* ajp13 OR Deploy war file to ROOT of tomcat and make relevant chagnes in web and server.xml All of these aren't working and I keep getting a intenal error. I need a way to basically trim the tomcat URL to make short. Thanks, Andy

    Read the article

  • Need some help on tomcat URL mod_rewrite or mod_jk

    - by Redbull Fan
    I am trying to remove the context name from the url of my server. Current URL - http://www.domainname.com/MyApp/ What I need to make is to make it avaialble at - www.domainname.com/ So it is only going to host one main app and that needs to be displayed when we open www.domainname.com/ on browser. I have already tried couple of things like below - RewriteEngine On RewriteCond %{REQUEST_URI} !^/(Context/.*)$ RewriteRule ^/(.*)$ /Context/$1 [P,L] OR redirect permanent /MyApp/ abcd://domainname.com OR Using JKMount - JkMount /MyApp/* ajp13 JkMount /MyApp* ajp13 OR Deploy war file to ROOT of tomcat and make relevant chagnes in web and server.xml All of these aren't working and I keep getting a intenal error. I need a way to basically trim the tomcat URL to make short. Thanks, Andy

    Read the article

  • Facebook API - Get comments

    - by Simon R
    Our business has a Facebook Fan Page. The fan page doesn't seem to generate any emails to us when updates are made to the page, whether someone adds a new status or someone comments on one of the statuses etc. Currently, we are running a very crude script to grab the content of the page and then use regular expressions to get the information we require. Obviously this is not fool proof and I'm looking into alternatives to this method. I've been looking at the facebook API and wonder if the rest server might be an option. I cannot, however, seem to find out how to return information of fan page statuses and their comments. Is anyone able to direct me how to use the API to retrieve this information. I am an admin of the fan page. The programming language I'm using is PHP. Many thanks.

    Read the article

  • ActionListener problem

    - by thegamer
    Hello, i am trying to make an actionListener on a button in another button which has also an actionlistener and i just couldn't figure it out for some way. I am trying to make an action on the 2nd button but i couldn't figure it out.If anyone helps me i'd appreciate! here is the code below: import java.awt.; import java.awt.event.; import javax.swing.; import java.io.; import java.util.*; public class basic implements ActionListener{ public static void main(String[] args) { basic process = new basic (); } public basic(){ JFrame fan = new JFrame("Scheme"); JPanel one = new JPanel(new BorderLayout()); fan.add(one); JPanel uno = new JPanel(); uno.setLayout(new BoxLayout(uno, BoxLayout.Y_AXIS)); JButton addB = new JButton("first choice"); addB.setAlignmentX(Component.CENTER_ALIGNMENT); uno.add(addB); addDButton.setActionCommand("hehe"); addDButton.addActionListener(this); one.add(uno,BorderLayout.CENTER); fan.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); fan.setSize(500,700); fan.setLocationByPlatform(true); fan.setVisible(true); } public void actionPerformed(ActionEvent evt) { JPanel markP = new JPanel(new FlowLayout(FlowLayout.RIGHT,10,20)); JDialog dialog = new JDialog((JFrame)null); dialog.getContentPane().add(markP,BorderLayout.CENTER); if (evt.getActionCommand().equals("hehe")) { JLabel title = new JLabel("Proceed"); title.setFont(new Font("Arial",Font.BOLD,15)); markP.add(title,BorderLayout.NORTH); JButton exit = new JButton("Exit"); markP.add(exit); //here i want to create another actionListener on the exit button only without affecting the other content which is in the button "addB " so that when i click on the addB button the J dialog pops up, and than when i click on exit button the program will return to the menu.I couldn't figure it out. dialog.toFront(); dialog.setModal(true); dialog.pack(); // dialog.setLocationRelativeTo(null); // dialog.setVisible(true); } // here the code goes on but the problem is that of the actionListener which is concerned.

    Read the article

  • Facebook API - Get comments

    - by Simon R
    Our business has a Facebook Fan Page. The fan page doesn't seem to generate any emails to us when updates are made to the page, whether someone adds a new status or someone comments on one of the statuses etc. Currently, we are running a very crude script to grab the content of the page and then use regular expressions to get the information we require. Obviously this is not fool proof and I'm looking into alternatives to this method. I've been looking at the facebook API and wonder if the rest server might be an option. I cannot, however, seem to find out how to return information of fan page statuses and their comments. Is anyone able to direct me how to use the API to retrieve this information. I am an admin of the fan page. The programming language I'm using is PHP. Many thanks.

    Read the article

  • why create "EventType clr20r3, P1 w3wp.exe" but don't have detail description of this unhandled exce

    - by Weixiao.Fan
    On the production server, I can see event from system Event Viewer when an asp.net app crash: *EventType clr20r3, P1 w3wp.exe, P2 6.0.3790.3959, P3 45d691cc, P4 app_web_default.aspx.cdcab7d2, P5 0.0.0.0, P6 4b2e4bf0, P7 4, P8 4, P9 system.dividebyzeroexception, P10 NIL.* it belongs to ".NET Runtime 2.0 Error Reporting" category. but I can't find a event which belongs to "ASP.NET 2.0.50727.0" which can give me this exception a detail view: *An unhandled exception occurred and the process was terminated. Application ID: /LM/W3SVC/505951206/Root Process ID: 1112 Exception: System.DivideByZeroException Message: Attempted to divide by zero. StackTrace: at _Default.Foo(Object state) at System.Threading.ExecutionContext.runTryCode(Object userData) at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Threading._ThreadPoolWaitCallback.PerformWaitCallbackInternal(_ThreadPoolWaitCallback tpWaitCallBack) at System.Threading.ThreadPoolWaitCallback.PerformWaitCallback(Object state) For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp I can find these two event on my dev machine, because of Visual Studio installing? If so, how can I disable this so I can emulate production environment? Great thanks and best regards, Fan

    Read the article

  • Display comments from a Facebook page link on my site's post page

    - by kindofabigdeal
    I am not sure if this is doable, but whenever I post a bit of news on my site, I will post a link on my Facebook fan page. Lately, I've noticed the whole discussion is happening on Facebook, with comments there being way bigger in numbers than on my page. I notice FB has a Social Comments plugin. I was wondering if there was a way to embed comments from my Facebook fan page for a specific link with that plugin or any way otherwise?

    Read the article

  • CPU overheating after cleaning it

    - by Roberts
    I wanted to clean my computer CPU heatsink and fan itself, because the temperature is not what I wanted. About (50C ~ 70C). I have Intel Core 2 Duo E4300 @1.8 GHz (LGA775). The heatsink wasn't so scary filled with dust but I wanted to clean it anyway. I didn't know how to get heatsink with fan from the socket. So after 25 minutes I've figured it out. But I didn't know how to get it back on so I spent a lot time getting out the motherboard from the case. The fan and heatsink... The case and all components are clear of dust. (I'm tired now). Then I put all back just the way it was, well did few things on cable management. But the problem was that I didn't know how to connect front audio connectors. I had Windows XP hibernated. So I started the PC and everything was normal, except CMOS memory was clear. I configured the BIOS just the way it was and while I was doing that I saw about 58C CPU temperature and fan at 1789 RPM. Restarted the computer with new settings applied. But Windows halted with Blue Screen (I forgot what error it was but something with KERNEL). Restarted the PC and deleted hibernation session and everything was back normal. But couldn't record any sound from front panel microphone. The problem was that I messed ground wire with mic. Again after fixing it I turned computer on. No problems. The fan currently is noisy and temperature was 78C. The temperature before was 55C - 60C at idle. Now it's about 60C. If I do something then temperature raises to 79C. While speaking in skype the temperature was 82C. Could this problem occur because of the thermal grease (it's old and never replaced)? Edit The problem wasn't in thermal paste (because I didn't touch it). The problem was that I installed heatsink wrong. Now instead of regular 60C CPU temperature the CPU is at 48C (cool).

    Read the article

  • Ivy bridge i3 recognized as Xeon e3-1200

    - by user287072
    The situation: I've got a Ivy bridge i3 3225 which is being recognized as a Xeon e3-1200 series cpu by Ubuntu 14.04 64bit. The problem: cpu fan makes more noise than necessary (under dual-boot Win8 the fans are off), cannot install the intel graphics drivers from 01.org. Goals: - find a fix for the load fans could be they are not CPU related, I've tried some fan controller packages, but they made no difference. - get the intel graphics to install (this now fails as xeon cpu's are not supported, I got the package working on a i5 laptop) - get to know some more about how hardware recognition works Tried so far: - a reinstall of Ubuntu, but it was recognized again as a Xeon cpu. - different fan control packages, but they either do not recognized the fans, or just keep fan speed to high. Any pointers as how to get Ubuntu recognized it are more than welcome. lspci -nnQ 00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller [8086:0150] (rev 09) 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port [8086:0151] (rev 09) 00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) 00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04) 00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) 00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04) 00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) 00:1c.5 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 6 [8086:1e1a] (rev c4) 00:1c.6 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev c4) 00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) 00:1f.0 ISA bridge [0601]: Intel Corporation Z77 Express Chipset LPC Controller [8086:1e44] (rev 04) 00:1f.2 SATA controller [0106]: Intel Corporation 7 Series/C210 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e02] (rev 04) 00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04) 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GK106 [GeForce GTX 660] [10de:11c0] (rev a1) 01:00.1 Audio device [0403]: NVIDIA Corporation GK106 HDMI Audio Controller [10de:0e0b] (rev a1) 03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 09) 04:00.0 PCI bridge [0604]: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge [1b21:1080] (rev 03)

    Read the article

  • Ubuntu 12.10 overheats HP dv6t

    - by raul
    12.10 in my hp dv6t-6c00 I'm worried about the heat... I followed some advice, and I think that I disabled ATI card, that improved the fan activity and reduced the temperature a little bit. But now fan is starting and stopping all the time, according to the Jupiter applet, temp goes from 45 degrees to 58-59.... (without any load) Should I worry? What can I do to solve this? What is the normal temp?

    Read the article

  • The Merits About Constructing Your Own YouTube Video

    Are you a fan of YouTube? If you take delight in watching free videos online, regarding a number of individual genres, you may well be a huge fan of YouTube. Although many internet users look at vide... [Author: Charles McDuffie - Computers and Internet - April 10, 2010]

    Read the article

  • Can I use this power supply + case combination without causing problems?

    - by evan
    I am putting together a computer with a Antec P180 case and a Thermaltake TR2 RX 650 W power supply. The problem is that the Antec P180 case has a separate compartment for the power supply. With an opening for the on/off switch + ac connector to one side, a wall with a small hole for cables to route through on top, a wall on the bottom, and on the other side a fan which pushes air from the hard drive compartment to the power supply compartment. I think the design of the case assumes the power supplies fan is on the side next to the on/off switch, but the fan on the power supply I have is on top, which makes me worry about overheating the power supply. There is about half an inch between the top of the power supply and the wall and the other fan should keep air flowing to push out the air that the power supply pushes upwards. Do you think this setup should work, or should I go get another power supply? Thanks!! PS: This computer will be running an Ubuntu server, so it will always be on, but the rest of the components shouldn't be generating as much heat as they would on say a gaming machine.

    Read the article

  • Intel Atom overheating in ASUS EEE Box 1501P

    - by Sergey L.
    I have had an ASUS EEE Box 1501P for just a little bit over a year. Of course it breaks 2 months after the warranty runs out. http://www.asus.com/Eee/EeeBox_PC/EeeBox_PC_EB1501P/ I have been using the box as a Home Media Center. Running mostly 24/7 often pausing a video overnight. Since last week the fan started running extremely loud. After some digging I found that the Intel Atom CPU in it is overheating and the built-in sensor is reporting temperatures way over 105°C. This got me worried, so I took the unit apart. Completely vacuumed the heat sink, oiled the fan, but the unit is still showing the same behaviour. After turning it on and just observing the hardware monitor in the BIOS the temperature slowly rises from 40°C to over 95°C in appx 5 min. I am running the newest BIOS and a lightweight Linux OPENELEC OS with XBMC on it. Now I am wondering if it could be a faulty heat sensor in the Atom. Recommended running temperature is up to 85°C, but I have not detected any performance hits when running at the above mentioned 105°C and there seem to be no software faults. How can an Atom with an attached heat sink and a fan running at full capacity even get this hot in the first place at 0 load? Aren't those things designed to generate virtually no heat? Could it be a faulty heat sensor? What shall I try to fix this? I would prefer not to damage the CPU, since it is hard fused into the motherboard and cannot be replaced. I could remove the heat pipe/heat sink, but it is getting hot, so heat is properly transferring from the CPU to the heat pipe, the fan is running at full capacity, is recently oiled and warm air is making it out of the exhaust. Edit: One more note: The North-bridge (or whatever it is called nowadays) is on the same heat pipe.

    Read the article

  • Supermicro X8SIL-F with Enermax Modu82+ 625W PSU booting issue

    - by Richard Whitman
    I am assembling a custom PC. The configuration is below: Motherboard: Supermicro X8SIL-F Processor: Intel Xeon 3430 Power Supply: Enermax Modu82+ 625W. Memory: Kingston KVR1333D3LQ8R9S/8GEC 8GBx1 installed in DimmA1 This power switch: Frozen CPU switch When I turn on the PSU, the motherboard tries to start itself before I even push the power switch. The following happens: The CPU fan rotates like once or twice, and then stops. After 1-2 seconds, the CPU fan tries to rotate again and stops after about one or two rotations. Finally, after another 1-2 seconds, it again starts and this time it rotates for about 3-4 seconds before stopping. If I pull out the Power switch, and turn on the PSU, again the MB turns on itself and the following happens: The CPU fan rotates like once or twice, and then stops. After 1-2 seconds, the CPU fan tries to rotate again and stops after about one or two rotations. Finally, after another 1-2 seconds, it again starts and the system boots properly I am sure there is nothing wrong with any of the components, because I have two sets of identical components (2 MBs, 2 CPUs, 2 PSUs, 2 switches and so on). And both of the systems show the same symptoms. Why is the MB booting up by itself? Why does it fail to boot when the Power Switch is installed? Is something wrong with the type of Power Switch I am using? PS: the power switch is installed correctly, I have double checked the MB manual to make sure its connecting the right pins.

    Read the article

  • How to get HP ASM to work under Xen Hypervisor?

    - by Dennis
    I have a HP DL560, currently running Debian Squeeze as dom0 on Xen Hypervisor, and the fans constantly run at 100%. In the past this wasn't a problem because I could install HP's ASM which includes fan management. However since I have installed a xen enabled kernel, the hp-health driver (the piece of ASM that controls the fans) won't start (at boot or manually). Anyone know of any way to make it work? (Or any other method of controlling the fans safely.) Note that the server has four i386 Xeon CPUs, each with its own fan, plus an extra case fan, and all of the fans can be doubled for redundancy. Also everything works fine under Squeeze without the xen-enabled kernel (can still boot the other one and hp-health loads fine on boot).

    Read the article

< Previous Page | 6 7 8 9 10 11 12 13 14 15 16 17  | Next Page >