Search Results

Search found 4451 results on 179 pages for 'fred 22'.

Page 10/179 | < Previous Page | 6 7 8 9 10 11 12 13 14 15 16 17  | Next Page >

• Rsyslogd not listening on port

  - by amorfis

  I installed rsyslogd on ubuntu server, started it and everything looks fine, but the port the server should listen on is not opened. ubuntu@node7:~$ sudo service rsyslog restart rsyslog stop/waiting rsyslog start/running, process 14114 Netstat shows it is not listening: ubuntu@node7:~$ netstat -tlan Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN tcp 0 320 172.22.0.17:22 10.8.8.38:61335 ESTABLISHED tcp6 0 0 :::22 :::* LISTEN tcp6 0 0 :::2776 :::* LISTEN tcp6 0 0 :::2777 :::* LISTEN tcp6 0 0 172.22.0.17:2777 172.22.0.11:56554 ESTABLISHED tcp6 0 0 172.22.0.17:2776 172.22.0.11:39780 ESTABLISHED This is how /etc/rsyslog.conf looks like (most comments omitted): ubuntu@node7:~$ cat /etc/rsyslog.conf ################# #### MODULES #### ################# $ModLoad imuxsock # provides support for local system logging $ModLoad imklog # provides kernel logging support (previously done by rklogd) $ModLoad imtcp $InputTCPServerRun 514 ########################### #### GLOBAL DIRECTIVES #### ########################### $ActionFileDefaultTemplate RSYSLOG_TraditionalFileFormat $RepeatedMsgReduction on $WorkDirectory /var/spool/rsyslog $FileOwner syslog $FileGroup adm $FileCreateMode 0640 $DirCreateMode 0755 $Umask 0022 $PrivDropToUser syslog $PrivDropToGroup adm $IncludeConfig /etc/rsyslog.d/*.conf In /etc/rsyslog.d/35-server-per-host.conf I have following lines, and I suspect this can be the cause. What does it mean? # Stop processing of all non-local messages. You can process remote messages # on levels less than 35. :fromhost-ip,!isequal,"127.0.0.1" ~ and if it is, how could I change it to have server listening and receiving and logging messages? UPDATE: I commented out suspected line, but still it's not listening on port 514

  Read the article

• Mysql count and sum from two diferent tables

  - by Agent_x

  Hi all, i have a problem with some querys in php and mysql: I have 2 diferent tables with one field in common: table 1 id | hits | num_g | cats | usr_id |active 1 | 10 | 11 | 1 | 53 | 1 2 | 13 | 16 | 3 | 53 | 1 1 | 10 | 22 | 1 | 22 | 1 1 | 10 | 21 | 3 | 22 | 1 1 | 2 | 6 | 2 | 11 | 1 1 | 11 | 1 | 1 | 11 | 1 table 2 id | usr_id | points 1 | 53 | 300 Now i use this statement to sum just the total from the table 1 every id count + 1 too SELECT usr_id, COUNT( id ) + SUM( num_g + hits ) AS tot_h FROM table1 WHERE usr_id!='0' GROUP BY usr_id ASC LIMIT 0 , 15 and i get the total for each usr_id usr_id| tot_h | 53 | 50 22 | 63 11 | 20 until here all is ok, now i have a second table with extra points (table2) I try this: SELECT usr_id, COUNT( id ) + SUM( num_g + hits ) + (SELECT points FROM table2 WHERE usr_id != '0' ) AS tot_h FROM table1 WHERE usr_id != '0' GROUP BY usr_id ASC LIMIT 0 , 15 but it seems to sum the 300 extra points to all users: usr_id| tot_h | 53 | 350 22 | 363 11 | 320 Now how i can get the total like the first try but + the secon table in one statement? because now i have just one entry in the second table but i can be more there. thanks for all the help. =============================================================================== hi thomas thanks for your reply, i think is in the right direction, but im getting weirds results, like usr_id | tot_h 22 | NULL <== i think the null its because that usr_id as no value in the table2 53 | 1033 Its like the second user is getting all the the values. then i try this one: SELECT table1.usr_id, COUNT( table1.id ) + SUM( table1.num_g + table1.hits + table2.points ) AS tot_h FROM table1 LEFT JOIN table2 ON table2.usr_id = table1.usr_id WHERE table1.usr_id != '0' AND table2.usr_id = table1.usr_id GROUP BY table1.usr_id ASC Same result i just get the sum of all values and not by each user, i need something like this result: usr_id | tot_h 53 | 53 <==== plus 300 points on table1 22 | 56 <==== plus 100 points on table2 /////////the result i need //////////// usr_id | tot_h 53 | 353 <==== plus 300 points on table2 22 | 156 <==== plus 100 points on table2 I think the structure need to be something like this Pseudo statements ;) from table1 count all id to get the number of record where the usr_id are then sum hits + num_g and from table2 select the extra points where the usr_id are the same as table1 and get teh result: usr_id | tot_h 53 | 353 22 | 156

  Read the article

• Outbound traffic being blocked for MIP/VIPped servers (Juniper SSG5)

  - by Mark S. Rasmussen

  As we've been having some problems with sporadic packet loss, I've been preparing a replacement router (also an SSG5) for our current Juniper SSG5. I've setup the new SSG5 identically to the old one. We have a /29 IP range with a single IP setup as a MIP map to a server and two others being used for VIP maps. Each VIP/MIP is accompanied by relevant policies. Long story short - we tried connected the new SSG5 and some things were not working as they should. No problem, I just reconnected the old one. However, some things are still broken, even when I reconnected the old one. I fear I may have inadvertently changed some settings while browsing through old settings in my attempt to reconfigure the new SSG5 unit. All inbound traffic seems to work as expected. However, the 192.168.2.202 server can't initiate any outbound connections. It works perfectly on the local network, but any pings or DNS lookups to external IP's fail. The MIP & VIP map to it works perfectly - I can access it through HTTP and RDP without issues. Any tips on what to debug, or where I've messed up my config? I've attached the full config here (with anonymized IPs): set clock timezone 1 set vrouter trust-vr sharable set vrouter "untrust-vr" exit set vrouter "trust-vr" unset auto-route-export exit set service "MyVOIP_UDP4569" protocol udp src-port 0-65535 dst-port 4569-4569 set service "MyVOIP_TCP22" protocol tcp src-port 0-65535 dst-port 22-22 set service "MyRDP" protocol tcp src-port 0-65535 dst-port 3389-3389 set service "MyRsync" protocol tcp src-port 0-65535 dst-port 873-873 set service "NZ_FTP" protocol tcp src-port 0-65535 dst-port 40000-41000 set service "NZ_FTP" + tcp src-port 0-65535 dst-port 21-21 set service "PPTP-VPN" protocol 47 src-port 2048-2048 dst-port 2048-2048 set service "PPTP-VPN" + tcp src-port 1024-65535 dst-port 1723-1723 set service "NZ_FMS_1935" protocol tcp src-port 0-65535 dst-port 1935-1935 set service "NZ_FMS_1935" + udp src-port 0-65535 dst-port 1935-1935 set service "NZ_FMS_8080" protocol tcp src-port 0-65535 dst-port 8080-8080 set service "CrashPlan Server" protocol tcp src-port 0-65535 dst-port 4280-4280 set service "CrashPlan Console" protocol tcp src-port 0-65535 dst-port 4282-4282 unset alg sip enable set auth-server "Local" id 0 set auth-server "Local" server-name "Local" set auth default auth server "Local" set auth radius accounting port 1646 set admin auth timeout 10 set admin auth server "Local" set admin format dos set vip multi-port set zone "Trust" vrouter "trust-vr" set zone "Untrust" vrouter "trust-vr" set zone "DMZ" vrouter "trust-vr" set zone "VLAN" vrouter "trust-vr" set zone "Untrust-Tun" vrouter "trust-vr" set zone "Trust" tcp-rst set zone "Untrust" block unset zone "Untrust" tcp-rst set zone "DMZ" tcp-rst set zone "VLAN" block unset zone "VLAN" tcp-rst set zone "Untrust" screen tear-drop set zone "Untrust" screen syn-flood set zone "Untrust" screen ping-death set zone "Untrust" screen ip-filter-src set zone "Untrust" screen land set zone "V1-Untrust" screen tear-drop set zone "V1-Untrust" screen syn-flood set zone "V1-Untrust" screen ping-death set zone "V1-Untrust" screen ip-filter-src set zone "V1-Untrust" screen land set interface ethernet0/0 phy full 100mb set interface ethernet0/3 phy full 100mb set interface ethernet0/4 phy full 100mb set interface ethernet0/5 phy full 100mb set interface ethernet0/6 phy full 100mb set interface "ethernet0/0" zone "Untrust" set interface "ethernet0/1" zone "Null" set interface "bgroup0" zone "Trust" set interface "bgroup1" zone "Trust" set interface "bgroup2" zone "Trust" set interface bgroup2 port ethernet0/2 set interface bgroup0 port ethernet0/3 set interface bgroup0 port ethernet0/4 set interface bgroup1 port ethernet0/5 set interface bgroup1 port ethernet0/6 unset interface vlan1 ip set interface ethernet0/0 ip 212.242.193.18/29 set interface ethernet0/0 route set interface bgroup0 ip 192.168.1.1/24 set interface bgroup0 nat set interface bgroup1 ip 192.168.2.1/24 set interface bgroup1 nat set interface bgroup2 ip 192.168.3.1/24 set interface bgroup2 nat set interface ethernet0/0 gateway 212.242.193.17 unset interface vlan1 bypass-others-ipsec unset interface vlan1 bypass-non-ip set interface ethernet0/0 ip manageable set interface bgroup0 ip manageable set interface bgroup1 ip manageable set interface bgroup2 ip manageable set interface bgroup0 manage mtrace unset interface bgroup1 manage ssh unset interface bgroup1 manage telnet unset interface bgroup1 manage snmp unset interface bgroup1 manage ssl unset interface bgroup1 manage web unset interface bgroup2 manage ssh unset interface bgroup2 manage telnet unset interface bgroup2 manage snmp unset interface bgroup2 manage ssl unset interface bgroup2 manage web set interface ethernet0/0 vip 212.242.193.19 2048 "PPTP-VPN" 192.168.1.131 set interface ethernet0/0 vip 212.242.193.19 + 4280 "CrashPlan Server" 192.168.1.131 set interface ethernet0/0 vip 212.242.193.19 + 4282 "CrashPlan Console" 192.168.1.131 set interface ethernet0/0 vip 212.242.193.22 22 "MyVOIP_TCP22" 192.168.2.127 set interface ethernet0/0 vip 212.242.193.22 + 4569 "MyVOIP_UDP4569" 192.168.2.127 set interface ethernet0/0 vip 212.242.193.22 + 3389 "MyRDP" 192.168.2.202 set interface ethernet0/0 vip 212.242.193.22 + 873 "MyRsync" 192.168.2.201 set interface ethernet0/0 vip 212.242.193.22 + 80 "HTTP" 192.168.2.202 set interface ethernet0/0 vip 212.242.193.22 + 2048 "PPTP-VPN" 192.168.2.201 set interface ethernet0/0 vip 212.242.193.22 + 8080 "NZ_FMS_8080" 192.168.2.216 set interface ethernet0/0 vip 212.242.193.22 + 1935 "NZ_FMS_1935" 192.168.2.216 set interface bgroup0 dhcp server service set interface bgroup1 dhcp server service set interface bgroup2 dhcp server service set interface bgroup0 dhcp server auto set interface bgroup1 dhcp server auto set interface bgroup2 dhcp server auto set interface bgroup0 dhcp server option domainname iplan set interface bgroup0 dhcp server option dns1 192.168.1.131 set interface bgroup1 dhcp server option domainname nzlan set interface bgroup1 dhcp server option dns1 192.168.2.202 set interface bgroup2 dhcp server option dns1 8.8.8.8 set interface bgroup2 dhcp server option wins1 8.8.4.4 set interface bgroup0 dhcp server ip 192.168.1.2 to 192.168.1.116 set interface bgroup1 dhcp server ip 192.168.2.2 to 192.168.2.116 set interface bgroup2 dhcp server ip 192.168.3.2 to 192.168.3.126 unset interface bgroup0 dhcp server config next-server-ip unset interface bgroup1 dhcp server config next-server-ip unset interface bgroup2 dhcp server config next-server-ip set interface "ethernet0/0" mip 212.242.193.21 host 192.168.2.202 netmask 255.255.255.255 vr "trust-vr" set interface "serial0/0" modem settings "USR" init "AT&F" set interface "serial0/0" modem settings "USR" active set interface "serial0/0" modem speed 115200 set interface "serial0/0" modem retry 3 set interface "serial0/0" modem interval 10 set interface "serial0/0" modem idle-time 10 set pak-poll p1queue pak-threshold 96 set pak-poll p2queue pak-threshold 32 set flow tcp-mss unset flow tcp-syn-check set dns host dns1 0.0.0.0 set dns host dns2 0.0.0.0 set dns host dns3 0.0.0.0 set address "Trust" "192.168.1.0/24" 192.168.1.0 255.255.255.0 set address "Trust" "192.168.2.0/24" 192.168.2.0 255.255.255.0 set address "Trust" "192.168.3.0/24" 192.168.3.0 255.255.255.0 set ike respond-bad-spi 1 unset ike ikeid-enumeration unset ike dos-protection unset ipsec access-session enable set ipsec access-session maximum 5000 set ipsec access-session upper-threshold 0 set ipsec access-session lower-threshold 0 set ipsec access-session dead-p2-sa-timeout 0 unset ipsec access-session log-error unset ipsec access-session info-exch-connected unset ipsec access-session use-error-log set l2tp default ppp-auth chap set url protocol websense exit set policy id 1 from "Trust" to "Untrust" "Any" "Any" "ANY" permit traffic set policy id 1 exit set policy id 2 from "Untrust" to "Trust" "Any" "VIP(212.242.193.19)" "PPTP-VPN" permit traffic set policy id 2 exit set policy id 3 from "Untrust" to "Trust" "Any" "VIP(212.242.193.22)" "HTTP" permit traffic priority 0 set policy id 3 set service "MyRDP" set service "MyRsync" set service "MyVOIP_TCP22" set service "MyVOIP_UDP4569" exit set policy id 6 from "Trust" to "Trust" "192.168.1.0/24" "192.168.2.0/24" "ANY" deny set policy id 6 exit set policy id 7 from "Trust" to "Trust" "192.168.2.0/24" "192.168.1.0/24" "ANY" deny set policy id 7 exit set policy id 8 from "Trust" to "Trust" "192.168.3.0/24" "192.168.1.0/24" "ANY" deny set policy id 8 exit set policy id 9 from "Trust" to "Trust" "192.168.3.0/24" "192.168.2.0/24" "ANY" deny set policy id 9 exit set policy id 10 from "Untrust" to "Trust" "Any" "MIP(212.242.193.21)" "NZ_FTP" permit set policy id 10 exit set policy id 11 from "Untrust" to "Trust" "Any" "VIP(212.242.193.22)" "PPTP-VPN" permit set policy id 11 exit set policy id 12 from "Untrust" to "Trust" "Any" "VIP(212.242.193.22)" "NZ_FMS_1935" permit set policy id 12 set service "NZ_FMS_8080" exit set policy id 13 from "Untrust" to "Trust" "Any" "VIP(212.242.193.19)" "CrashPlan Console" permit set policy id 13 set service "CrashPlan Server" exit set nsmgmt bulkcli reboot-timeout 60 set ssh version v2 set config lock timeout 5 set snmp port listen 161 set snmp port trap 162 set vrouter "untrust-vr" exit set vrouter "trust-vr" unset add-default-route exit set vrouter "untrust-vr" exit set vrouter "trust-vr" exit

  Read the article

• Allowing connections initiated from outside

  - by Mark S. Rasmussen

  I've got an old Juniper SSG5 running ScreenOS 5.4.0r6.0. Once a day, more or less, it'll start randomly dropping packets at a rate of ~5-10%. We currently solve this issue by simply rebooting the unit, after which it resumes working in perfect condition. As this error has started appearing randomly, without any configuration or hardware changes, I'm assuming I've got an aging unit about to fail. As such, I've got a replacement SSG5 running ScreenOS 6.0. I've dumped the config on the 5.4 and imported it into a clean 6.0, and it seems to gladly accept it, and all my configuration seems to be A-OK. However, upon connecting the new unit, all outside-initiated connections seem to be blocked. If I browse our external IP from the inside, everything works perfectly, and it's not just port 80, SSH, Crashplan - all of our policies route correctly. All normal networking, initiated from the inside, work perfectly as well. If on the other hand I browse our external IP from the outside, everything is blocked. Barring differences between ScreenOS 5.4 and 6.0, the config is identical. Is there a setting somewhere that defines whether outside/inside initiated connections are allowed? unset key protection enable set clock timezone 1 set vrouter trust-vr sharable set vrouter "untrust-vr" exit set vrouter "trust-vr" unset auto-route-export exit set service "MyVOIP_UDP4569" protocol udp src-port 0-65535 dst-port 4569-4569 set service "MyVOIP_TCP22" protocol tcp src-port 0-65535 dst-port 22-22 set service "MyRDP" protocol tcp src-port 0-65535 dst-port 3389-3389 set service "MyRsync" protocol tcp src-port 0-65535 dst-port 873-873 set service "NZ_FTP" protocol tcp src-port 0-65535 dst-port 40000-41000 set service "NZ_FTP" + tcp src-port 0-65535 dst-port 21-21 set service "PPTP-VPN" protocol 47 src-port 2048-2048 dst-port 2048-2048 set service "PPTP-VPN" + tcp src-port 1024-65535 dst-port 1723-1723 set service "NZ_FMS_1935" protocol tcp src-port 0-65535 dst-port 1935-1935 set service "NZ_FMS_1935" + udp src-port 0-65535 dst-port 1935-1935 set service "NZ_FMS_8080" protocol tcp src-port 0-65535 dst-port 8080-8080 set service "CrashPlan Server" protocol tcp src-port 0-65535 dst-port 4280-4280 set service "CrashPlan Console" protocol tcp src-port 0-65535 dst-port 4282-4282 unset alg sip enable set alg appleichat enable unset alg appleichat re-assembly enable set alg sctp enable set auth-server "Local" id 0 set auth-server "Local" server-name "Local" set auth default auth server "Local" set auth radius accounting port 1646 set admin name "netscreen" set admin password "XXX" set admin auth web timeout 10 set admin auth dial-in timeout 3 set admin auth server "Local" set admin format dos set vip multi-port set zone "Trust" vrouter "trust-vr" set zone "Untrust" vrouter "trust-vr" set zone "DMZ" vrouter "trust-vr" set zone "VLAN" vrouter "trust-vr" set zone "Untrust-Tun" vrouter "trust-vr" set zone "Trust" tcp-rst set zone "Untrust" block unset zone "Untrust" tcp-rst set zone "MGT" block unset zone "V1-Trust" tcp-rst unset zone "V1-Untrust" tcp-rst set zone "DMZ" tcp-rst unset zone "V1-DMZ" tcp-rst unset zone "VLAN" tcp-rst set zone "Untrust" screen tear-drop set zone "Untrust" screen syn-flood set zone "Untrust" screen ping-death set zone "Untrust" screen ip-filter-src set zone "Untrust" screen land set zone "V1-Untrust" screen tear-drop set zone "V1-Untrust" screen syn-flood set zone "V1-Untrust" screen ping-death set zone "V1-Untrust" screen ip-filter-src set zone "V1-Untrust" screen land set interface ethernet0/0 phy full 100mb set interface ethernet0/3 phy full 100mb set interface ethernet0/4 phy full 100mb set interface ethernet0/5 phy full 100mb set interface ethernet0/6 phy full 100mb set interface "ethernet0/0" zone "Untrust" set interface "ethernet0/1" zone "Null" set interface "bgroup0" zone "Trust" set interface "bgroup1" zone "Trust" set interface "bgroup2" zone "Trust" set interface bgroup2 port ethernet0/2 set interface bgroup0 port ethernet0/3 set interface bgroup0 port ethernet0/4 set interface bgroup1 port ethernet0/5 set interface bgroup1 port ethernet0/6 unset interface vlan1 ip set interface ethernet0/0 ip 215.173.182.18/29 set interface ethernet0/0 route set interface bgroup0 ip 192.168.1.1/24 set interface bgroup0 nat set interface bgroup1 ip 192.168.2.1/24 set interface bgroup1 nat set interface bgroup2 ip 192.168.3.1/24 set interface bgroup2 nat set interface ethernet0/0 gateway 215.173.182.17 unset interface vlan1 bypass-others-ipsec unset interface vlan1 bypass-non-ip set interface ethernet0/0 ip manageable set interface bgroup0 ip manageable set interface bgroup1 ip manageable set interface bgroup2 ip manageable set interface bgroup0 manage mtrace unset interface bgroup1 manage ssh unset interface bgroup1 manage telnet unset interface bgroup1 manage snmp unset interface bgroup1 manage ssl unset interface bgroup1 manage web unset interface bgroup2 manage ssh unset interface bgroup2 manage telnet unset interface bgroup2 manage snmp unset interface bgroup2 manage ssl unset interface bgroup2 manage web set interface ethernet0/0 vip 215.173.182.19 2048 "PPTP-VPN" 192.168.1.131 set interface ethernet0/0 vip 215.173.182.19 + 4280 "CrashPlan Server" 192.168.1.131 set interface ethernet0/0 vip 215.173.182.19 + 4282 "CrashPlan Console" 192.168.1.131 set interface ethernet0/0 vip 215.173.182.22 22 "MyVOIP_TCP22" 192.168.2.127 set interface ethernet0/0 vip 215.173.182.22 + 4569 "MyVOIP_UDP4569" 192.168.2.127 set interface ethernet0/0 vip 215.173.182.22 + 3389 "MyRDP" 192.168.2.202 set interface ethernet0/0 vip 215.173.182.22 + 873 "MyRsync" 192.168.2.201 set interface ethernet0/0 vip 215.173.182.22 + 80 "HTTP" 192.168.2.202 set interface ethernet0/0 vip 215.173.182.22 + 2048 "PPTP-VPN" 192.168.2.201 set interface ethernet0/0 vip 215.173.182.22 + 8080 "NZ_FMS_8080" 192.168.2.216 set interface ethernet0/0 vip 215.173.182.22 + 1935 "NZ_FMS_1935" 192.168.2.216 set interface bgroup0 dhcp server service set interface bgroup1 dhcp server service set interface bgroup2 dhcp server service set interface bgroup0 dhcp server auto set interface bgroup1 dhcp server auto set interface bgroup2 dhcp server auto set interface bgroup0 dhcp server option domainname companyalan set interface bgroup0 dhcp server option dns1 192.168.1.131 set interface bgroup1 dhcp server option domainname companyblan set interface bgroup1 dhcp server option dns1 192.168.2.202 set interface bgroup2 dhcp server option dns1 8.8.8.8 set interface bgroup2 dhcp server option wins1 8.8.4.4 set interface bgroup0 dhcp server ip 192.168.1.2 to 192.168.1.116 set interface bgroup1 dhcp server ip 192.168.2.2 to 192.168.2.116 set interface bgroup2 dhcp server ip 192.168.3.2 to 192.168.3.126 unset interface bgroup0 dhcp server config next-server-ip unset interface bgroup1 dhcp server config next-server-ip unset interface bgroup2 dhcp server config next-server-ip set interface "ethernet0/0" mip 215.173.182.21 host 192.168.2.202 netmask 255.255.255.255 vr "trust-vr" set interface "serial0/0" modem settings "USR" init "AT&F" set interface "serial0/0" modem settings "USR" active set interface "serial0/0" modem speed 115200 set interface "serial0/0" modem retry 3 set interface "serial0/0" modem interval 10 set interface "serial0/0" modem idle-time 10 set flow tcp-mss unset flow tcp-syn-check unset flow tcp-syn-bit-check set flow reverse-route clear-text prefer set flow reverse-route tunnel always set pki authority default scep mode "auto" set pki x509 default cert-path partial set pki x509 dn name "[email protected]" set dns host dns1 0.0.0.0 set dns host dns2 0.0.0.0 set dns host dns3 0.0.0.0 set address "Trust" "192.168.1.0/24" 192.168.1.0 255.255.255.0 set address "Trust" "192.168.2.0/24" 192.168.2.0 255.255.255.0 set address "Trust" "192.168.3.0/24" 192.168.3.0 255.255.255.0 set crypto-policy exit set ike respond-bad-spi 1 set ike ikev2 ike-sa-soft-lifetime 60 unset ike ikeid-enumeration unset ike dos-protection unset ipsec access-session enable set ipsec access-session maximum 5000 set ipsec access-session upper-threshold 0 set ipsec access-session lower-threshold 0 set ipsec access-session dead-p2-sa-timeout 0 unset ipsec access-session log-error unset ipsec access-session info-exch-connected unset ipsec access-session use-error-log set vrouter "untrust-vr" exit set vrouter "trust-vr" exit set l2tp default ppp-auth chap set url protocol websense exit set policy id 1 from "Trust" to "Untrust" "Any" "Any" "ANY" permit set policy id 1 exit set policy id 2 from "Untrust" to "Trust" "Any" "VIP(215.173.182.19)" "PPTP-VPN" permit traffic set policy id 2 exit set policy id 3 from "Untrust" to "Trust" "Any" "VIP(215.173.182.22)" "HTTP" permit log set policy id 3 set service "MyRDP" set service "MyRsync" set service "MyVOIP_TCP22" set service "MyVOIP_UDP4569" exit set policy id 6 from "Trust" to "Trust" "192.168.1.0/24" "192.168.2.0/24" "ANY" deny set policy id 6 exit set policy id 7 from "Trust" to "Trust" "192.168.2.0/24" "192.168.1.0/24" "ANY" deny set policy id 7 exit set policy id 8 from "Trust" to "Trust" "192.168.3.0/24" "192.168.1.0/24" "ANY" deny set policy id 8 exit set policy id 9 from "Trust" to "Trust" "192.168.3.0/24" "192.168.2.0/24" "ANY" deny set policy id 9 exit set policy id 10 from "Untrust" to "Trust" "Any" "MIP(215.173.182.21)" "NZ_FTP" permit set policy id 10 exit set policy id 11 from "Untrust" to "Trust" "Any" "VIP(215.173.182.22)" "PPTP-VPN" permit set policy id 11 exit set policy id 12 from "Untrust" to "Trust" "Any" "VIP(215.173.182.22)" "NZ_FMS_1935" permit set policy id 12 set service "NZ_FMS_8080" exit set policy id 13 from "Untrust" to "Trust" "Any" "VIP(215.173.182.19)" "CrashPlan Console" permit set policy id 13 set service "CrashPlan Server" exit set nsmgmt bulkcli reboot-timeout 60 set ssh version v2 set config lock timeout 5 unset license-key auto-update set telnet client enable set snmp port listen 161 set snmp port trap 162 set vrouter "untrust-vr" exit set vrouter "trust-vr" unset add-default-route exit set vrouter "untrust-vr" exit set vrouter "trust-vr" exit Note that I've previously posted a similar question (pertaining to the same device & replacement, but ultimately caused by a malfunctioning switch, and thus clouding the current issue): Outbound traffic being blocked for MIP/VIPped servers (Juniper SSG5)

  Read the article

• Order by text and then by number

  - by Chaim Chaikin

  I have data like: Audio 1 File 10 Audio 2 Audio 3 File 11 Audio 13 Audio 22 File 20 Test 22 Audio 10 File 1 File 2 I need it order first by the text (i.e. Audio, File, Test) and then by number (1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22 etc.) The problem is that sorting it returns something like this: Audio 1 Audio 10 Audio 13 Audio 2 Audio 22 Audio 3 File 1 File 10 File 11 File 2 File 20 Test 22 While the result I want is: Audio 1 Audio 2 Audio 3 Audio 10 Audio 13 Audio 22 File 1 File 2 File 10 File 11 File 20 Test 22 If they were just numbers (i.e. without the audio, file, test) then I could just sort numerically. However, how can I sort here first by text and then by number.

  Read the article

• ERROR with rpm_check_debug vs depsolve

  - by Frank Thornton

  Transaction Summary ========================================================================================================================================================== Install 9 Package(s) Upgrade 227 Package(s) Remove 1 Package(s) Total size: 252 M Downloading Packages: Running rpm_check_debug ERROR with rpm_check_debug vs depsolve: libasound.so.2()(64bit) is needed by libgcj-4.4.7-4.el6.x86_64 libasound.so.2(ALSA_0.9)(64bit) is needed by libgcj-4.4.7-4.el6.x86_64 ** Found 15 pre-existing rpmdb problem(s), 'yum check' output follows: alsa-lib-devel-1.0.22-3.el6.x86_64 has missing requires of alsa-lib = ('0', '1.0.22', '3.el6') alsa-lib-devel-1.0.22-3.el6.x86_64 has missing requires of libasound.so.2()(64bit) alsa-utils-1.0.22-5.el6.x86_64 has missing requires of libasound.so.2()(64bit) alsa-utils-1.0.22-5.el6.x86_64 has missing requires of libasound.so.2(ALSA_0.9)(64bit) alsa-utils-1.0.22-5.el6.x86_64 has missing requires of libasound.so.2(ALSA_0.9.0rc4)(64bit) alsa-utils-1.0.22-5.el6.x86_64 has missing requires of libasound.so.2(ALSA_0.9.0rc8)(64bit) frontpage-2002-SR1.2.i386 has missing requires of libexpat.so.0 gstreamer-plugins-base-0.10.29-2.el6.x86_64 has missing requires of libasound.so.2()(64bit) gstreamer-plugins-base-0.10.29-2.el6.x86_64 has missing requires of libasound.so.2(ALSA_0.9)(64bit) gstreamer-plugins-base-0.10.29-2.el6.x86_64 has missing requires of libasound.so.2(ALSA_0.9.0rc4)(64bit) libgcj-4.4.7-3.el6.x86_64 has missing requires of libasound.so.2()(64bit) libgcj-4.4.7-3.el6.x86_64 has missing requires of libasound.so.2(ALSA_0.9)(64bit) 1:qt-x11-4.6.2-26.el6_4.x86_64 has missing requires of libasound.so.2()(64bit) 1:qt-x11-4.6.2-26.el6_4.x86_64 has missing requires of libasound.so.2(ALSA_0.9)(64bit) 1:qt-x11-4.6.2-26.el6_4.x86_64 has missing requires of libasound.so.2(ALSA_0.9.0rc4)(64bit) Your transaction was saved, rerun it with: yum load-transaction /tmp/yum_save_tx-2013-12-23-22-364infzT.yumtx root@www1 [~]# I did some research and this is due to a 32bit binary trying to install itself or broken repo? root@www1 [~]# yum repolist Loaded plugins: fastestmirror, security Loading mirror speeds from cached hostfile * base: centos.mirror.lstn.net * extras: mirror.ash.fastserv.com * updates: ftp.usf.edu repo id repo name status base CentOS-6 - Base 6,284+83 dag Dag RPM Repository for Red Hat Enterprise Linux 4,559+91 extras CentOS-6 - Extras 14 updates CentOS-6 - Updates 247+39 repolist: 11,104 Now I disabled epel and rpmforge repops and still ended up with the same issues. Ideas?

  Read the article

• setting up a shared folder in linux

  - by Chris

  I'm trying to set up a folder in my home directory that will be shared with another user but for some reason it is not working this is what I've done, I have tried two different ways using ACL's and chown/chgrp etc I set up a group called say: sharedgroup and added both my user (john) and fred to it so when I run groups john john wheel sharedgroup groups fred sharedgroup fred mkdir /home/john/shared vim /home/john/shared/hello.txt (typed in some text saved it) chown -R :sharedgroup shared chmod -R o=-rwx shared ll drwxrwx--- 2 john sharedgroup 4096 Sep 9 21:14 shared ll shared -rw-rw-r-- 1 john sharedgroup 7 Sep 9 21:14 hello.txt (I also tried adding in the s permissions but that didn't help either) then when I log out of the server and log back in as fred and try these commands they fail vim /home/john/shared/hello.txt (won't allow me to write opens a blank file) cd /home/john/shared -bash: cd: /home/john/cis: Permission Denied ls /home/john/shared -ls: /home/john/shared: Permission Denied ls -lad /home/john/shared -ls: /home/john/shared: Permission Denied id fred uid=500(fred) gid=502(sharedgroup) groups=502(sharedgroup),500(fred) context=user_u:system_r:unconfined_t Any idea what I'm doing wrong??

  Read the article

• CSS width 100% doesn't work properly on 22'' monitor

  - by Describer

  Here is HTML and CSS. On 17'' and 19'' screen it looks nice. How I could catch the bug? Please help.

  Read the article

• Ajax long polling (comet) + php on lighttpd v1.4.22 multiple instances problem.

  - by fibonacci

  Hi, I am new to this site, so I really hope I will provide all the necessary information regarding my question. I've been trying to create a "new message arrived notification" using long polling. Currently I am initiating the polling request by window.onLoad event of each page in my site. On the server side I have an infinite loop: while(1){ if(NewMessageArrived($current_user))break; sleep(10); } echo $newMessageCount; On the client side I have the following (simplified) ajax functions: poll_new_messages(){ xmlhttp=GetXmlHttpObject(); //... xmlhttp.onreadystatechange=got_new_message_count; //... xmlhttp.send(); } got_new_message_count(){ if (xmlhttp.readyState==4){ updateMessageCount(xmlhttp.responseText); //... poll_new_messages(); } } The problem is that with each page load, the above loop starts again. The result is multiple infinite loops for each user that eventually make my server hang. *The NewMessageArived() function queries MySQL DB for new unread messages. *At the beginning of the php script I run start_session() in order to obtain the $current_user value. I am currently the only user of this site so it is easy for me to debug this behavior by writing time() to a file inside this loop. What I see is that the file is being written more often than once in 10 seconds, but it starts only when I go from page to page. Please let me know if any additional information might help. Thank you.

  Read the article

• How to install php soap with rpm packages in centos 6.4 x86_64

  - by HPM

  I want to install php-soap, centos says: [root@LMS-Cent64 soap]# rpm -ivh php-soap-5.3.3-22.el6.x86_64.rpm error: Failed dependencies: php-common(x86-64) = 5.3.3-22.el6 is needed by php-soap-5.3.3-22.el6.x86_64 after installing php-common(x86-64): [root@LMS-Cent64 soap]# rpm -ivh php-common-5.3.3-22.el6.x86_64.rpm Preparing... ########################################### [100%] package php-common-5.3.3-23.el6_4.x86_64 (which is newer than php-common-5.3.3-22.el6.x86_64) is already installed file /usr/lib64/php/modules/phar.so from install of php-common-5.3.3-22.el6.x86_64 conflicts with file from package php-common-5.3.3-23.el6_4.x86_64 What to do now?

  Read the article

• Can't install Apache 2.2.22 on Ubuntu 13.10

  - by B18C1

  My work environment requires Apache 2.2.22 instead of the latest version of 2.4. My machine is currently running Ubuntu 13.10. When I use Synaptic or apt-get it will not allow me to choose an older version of Apache than 2.4. So my question is, how can I force an install of Apache 2.2.22 on Ubuntu 13.10 using Synaptic or apt-get. When I do try to specify the version I get the following: sudo apt-get install apache2=2.2.22-1ubuntu1 [sudo] password for b18c1: Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: apache2 : Depends: apache2-mpm-worker (= 2.2.22-1ubuntu1) but it is not going to installed or apache2-mpm-prefork (= 2.2.22-1ubuntu1) but it is not going to be installed or apache2-mpm-event (= 2.2.22-1ubuntu1) but it is not going to be installed or apache2-mpm-itk (= 2.2.22-1ubuntu1) but it is not going to be installed Depends: apache2.2-common (= 2.2.22-1ubuntu1) but it is not going to be installed E: Unable to correct problems, you have held broken packages.

  Read the article

• "Enable Wireless" option is disabled in network settings

  - by silenTK

  I'm using Ubuntu 11.10 (dual booted with Windows 7) but I'm unable to access Internet wireless even though I can do so on Windows 7. The output for rfkill list all is given below: rfkill list all 0: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: yes 1: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no The output for sudo lshw -C network *-network DISABLED is: description: Wireless interface product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth1 version: 01 serial: 11:11:11:11:11:11 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 latency=0 multicast=yes wireless=IEEE 802.11 resources: irq:16 memory:c2500000-c2503fff *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 05 serial: 22:22:22:22:22:22 size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8105e-1.fw latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:42 ioport:3000(size=256) memory:c0404000-c0404fff memory:c0400000-c0403fff Broadcom STA wireless driver is installed, activated, and currently in use. My laptop is a HP-Pavilion-g6-1004tx. My hardware switch is on. Enable Wireless option is also disabled in network settings.

  Read the article

• BindException with INTERNET permission requested

  - by Mondain

  I have seen several questions regarding SocketException when using Android, but none of them cover the BindException that I get even with the INTERNET permission specified in my manifest. Here is part of my manifest: <uses-permission android:name="android.permission.INTERNET"></uses-permission> <uses-permission android:name="android.permission.ACCESS_NETWORK_STATE"></uses-permission> <uses-permission android:name="android.permission.ACCESS_WIFI_STATE"></uses-permission> <uses-permission android:name="android.permission.READ_OWNER_DATA"></uses-permission> <uses-permission android:name="android.permission.READ_PHONE_STATE"></uses-permission> <uses-permission android:name="android.permission.ACCOUNT_MANAGER"></uses-permission> <uses-permission android:name="android.permission.AUTHENTICATE_ACCOUNTS"></uses-permission> Here is the relevant portion of my LogCat output: 04-22 14:49:06.117: DEBUG/MyLibrary(4844): Address to bind: 192.168.1.14 port: 843 04-22 14:49:06.197: WARN/System.err(4844): java.net.BindException: Permission denied (maybe missing INTERNET permission) 04-22 14:49:06.207: WARN/System.err(4844): at org.apache.harmony.luni.platform.OSNetworkSystem.socketBindImpl(Native Method) 04-22 14:49:06.207: WARN/System.err(4844): at org.apache.harmony.luni.platform.OSNetworkSystem.bind(OSNetworkSystem.java:107) 04-22 14:49:06.217: WARN/System.err(4844): at org.apache.harmony.luni.net.PlainSocketImpl.bind(PlainSocketImpl.java:184) 04-22 14:49:06.217: WARN/System.err(4844): at java.net.ServerSocket.bind(ServerSocket.java:414) 04-22 14:49:06.227: WARN/System.err(4844): at org.apache.harmony.nio.internal.ServerSocketChannelImpl$ServerSocketAdapter.bind(ServerSocketChannelImpl.java:213) 04-22 14:49:06.227: WARN/System.err(4844): at java.net.ServerSocket.bind(ServerSocket.java:367) 04-22 14:49:06.237: WARN/System.err(4844): at org.apache.harmony.nio.internal.ServerSocketChannelImpl$ServerSocketAdapter.bind(ServerSocketChannelImpl.java:283) 04-22 14:49:06.237: WARN/System.err(4844): at mylibrary.net.PolicyConnection$PolicyServerWorker.(PolicyConnection.java:201) I Really hope this is a simple problem and not something complicated by the fact that the binding is occurring within a worker thread on a port less than 1024. Update Looks as if this is a privileged port issue, anyone know how to bind to ports lower than 1024 in Android? SelectorProvider provider = SelectorProvider.provider(); try { ServerSocketChannel channel = provider.openServerSocketChannel(); policySocket = channel.socket(); Log.d("MyLibrary", "Address to bind: " + device.getAddress().getAddress() + " port: 843"); InetSocketAddress addr = new InetSocketAddress(InetAddress.getByName(device.getAddress().getAddress()), 843); policySocket.bind(addr); policySocket.setReuseAddress(true); policySocket.setReceiveBufferSize(256); } catch (Exception e) { e.printStackTrace(); }

  Read the article

• how to determin what url has opened file now? (php)

  - by Ole Jak

  so I want to be able to get informed if my php script file is opened in localhost/myfile.php or in something like 222.22.22.22/myfile.php so I needa php function to determin if url starts with localhost or any other address (I want to get it as string like '22.33.22.33') How to do such thing?

  Read the article

• python script argument misinterpreted in Hudson Execute Shell step

  - by chz

  When I run my python script in the shell terminal, it works sudo myscript.py --version=22 --base=252 --hosts="{'hostA':[1],'hostB':[22]}" But when I run in Hudson and Jenkins, using Execute Shell step, somehow, the string --hosts="{'hostA':[1],'hostB':[22]}" is interpreted as sudo myscript.py --version=22 --base=252 '--hosts="{'hostA':[1],'hostB':[22]}"' How do we overcome this so that our script would run in Jenkins and Hudson ? Thank you. Sincerely

  Read the article

• PL/SQL to delete invalid data from token Strings

  - by Jie Chen

  Previous article describes how to delete the duplicated values from token string in bulk mode. This one extends it and shows the way to delete invalid data. Scenario Support we have page_two and manufacturers tables in database and the table DDL is: SQL> desc page_two; Name NULL? TYPE ----------------------------------------- -------- ------------------------ MULTILIST04 VARCHAR2(765) SQL> SQL> desc manufacturers; Name NULL? TYPE ----------------------------------------- -------- ------ ID NOT NULL NUMBER NAME VARCHAR In table page_two, column multilist04 stores a token string splitted with common. Each token represent a valid ID in manufacturers table. My expectation is to delete invalid token strings from page_two.multilist04, which have no mapping id in manufacturers.id. For example in below SQL result: ,6295728,33,6295729,6295730,6295731,22, , value 33 and 22 are invalid data because there is no ID equals to 33 or 22 in manufacturers table. So I need to delete 33 and 22. SQL> col rowid format a20; SQL> col multilist04 format a50; SQL> select rowid, multilist04 from page_two; ROWID MULTILIST04 -------------------- -------------------------------------------------- AAB+UrADfAAAAhUAAI ,6295728,6295729,6295730,6295731, AAB+UrADfAAAAhUAAJ ,1111,6295728,6295729,6295730,6295731, AAB+UrADfAAAAhUAAK ,6295728,111,6295729,6295730,6295731, AAB+UrADfAAAAhUAAL ,6295728,6295729,6295730,6295731,22, AAB+UrADfAAAAhUAAM ,6295728,33,6295729,6295730,6295731,22, SQL> select id, encode_name from manufacturers where id in (1111,11,22,33); No rows selected SQL> Solution As there is no existing SPLIT function or related in PL/SQL, I should program it by myself. I code Split intermediate function which is used to get the token value between current splitter and next splitter. Next program is main entry point, it get each column value from page_two.multilist04, process each row based on cursor. When it get each multilist04 value, it uses above Split function to get each token string stored to singValue variant, then check if it exists in manufacturers.id. If not found, set fixFlag to 1, pending to be deleted.

  Read the article

• Can't install any drivers at all on Windows 8. Error 0x000003F9

  - by ABarney

  I suddenly can't install any drivers at all on my Windows 8 Pro x64 install. It doesn't matter what kind of driver it is, nothing will install. Everything ends with error 0x000003F9: The system has attempted to load or restore a file into the registry, but the specified file is not in a registry file format. When Windows Update tries to install a driver, it just gives error code 800703F9 and says that "Windows Update ran into a problem." I've already done a scan of system files with sfc, tried another user account, done a chkdsk, and a few more things, but nothing works. The problem started when I tried to install drivers for my printer earlier today and suddenly started getting messages saying that "Windows Modules Installer has stopped working." I decided to restart and was being greeted with the recovery boot options. I shut the computer down, but when I booted it back up the same thing happened, so I did a repair your pc, and was able to boot into the OS properly. Then I rebooted into my external drive and did a chkdsk on the Windows 8 install that started acting funny. When I booted back into Windows 8, I wasn't able to install any drivers. They all keep coming up with the same error. And I can't seem to find anything at all on this issue. Any help would be much appreciated. Here's an install log from a failed driver install: >>> [Device Install (DiInstallDriver) - F:\Android\android-sdk\extras\google\usb_driver\android_winusb.inf] >>> Section start 2012/12/06 20:15:20.714 cmd: "F:\Windows\System32\InfDefaultInstall.exe" "F:\Android\android-sdk\extras\google\usb_driver\android_winusb.inf" inf: {SetupCopyOEMInf: F:\Android\android-sdk\extras\google\usb_driver\android_winusb.inf} 20:15:20.716 sto: {Import Driver Package: F:\Android\android-sdk\extras\google\usb_driver\android_winusb.inf} 20:15:20.719 sto: Driver Store = F:\Windows\System32\DriverStore [Online] (6.2.9200) sto: Driver Package = F:\Android\android-sdk\extras\google\usb_driver\android_winusb.inf sto: Architecture = amd64 sto: Flags = 0x00000000 inf: Provider = Google, Inc. inf: Class GUID = {3f966bd9-fa04-4ec5-991c-d326973b5128} inf: Driver Version = 08/27/2012,7.0.0.1 inf: Catalog File = androidwinusba64.cat inf: Version Flags = 0x00000011 ! sto: Unable to determine presence of driver package 'android_winusb.inf'. Error = 0x000003F9 flq: Copying 'F:\Android\android-sdk\extras\google\usb_driver\amd64\WdfCoInstaller01009.dll' to 'F:\Users\ALEXBA~1\AppData\Local\Temp\{5da5e23e-2f82-2b4f-b73d-9d77c2978b0e}\amd64\WdfCoInstaller01009.dll'. flq: Copying 'F:\Android\android-sdk\extras\google\usb_driver\amd64\WinUSBCoInstaller2.dll' to 'F:\Users\ALEXBA~1\AppData\Local\Temp\{5da5e23e-2f82-2b4f-b73d-9d77c2978b0e}\amd64\WinUSBCoInstaller2.dll'. flq: Copying 'F:\Android\android-sdk\extras\google\usb_driver\android_winusb.inf' to 'F:\Users\ALEXBA~1\AppData\Local\Temp\{5da5e23e-2f82-2b4f-b73d-9d77c2978b0e}\android_winusb.inf'. flq: Copying 'F:\Android\android-sdk\extras\google\usb_driver\androidwinusba64.cat' to 'F:\Users\ALEXBA~1\AppData\Local\Temp\{5da5e23e-2f82-2b4f-b73d-9d77c2978b0e}\androidwinusba64.cat'. pol: {Driver package policy check} 20:15:20.814 pol: {Driver package policy check - exit(0x00000000)} 20:15:20.814 sto: {Stage Driver Package: F:\Users\ALEXBA~1\AppData\Local\Temp\{5da5e23e-2f82-2b4f-b73d-9d77c2978b0e}\android_winusb.inf} 20:15:20.815 ! sto: Unable to determine presence of driver package 'android_winusb.inf'. Error = 0x000003F9 inf: {Query Configurability: F:\Users\ALEXBA~1\AppData\Local\Temp\{5da5e23e-2f82-2b4f-b73d-9d77c2978b0e}\android_winusb.inf} 20:15:20.820 inf: Driver package uses WDF. inf: Driver package 'android_winusb.inf' is configurable. inf: {Query Configurability: exit(0x00000000)} 20:15:20.823 flq: Copying 'F:\Users\ALEXBA~1\AppData\Local\Temp\{5da5e23e-2f82-2b4f-b73d-9d77c2978b0e}\amd64\WdfCoInstaller01009.dll' to 'F:\Windows\System32\DriverStore\Temp\{30801e6d-d30f-2f4b-87dc-c80122d5f248}\amd64\WdfCoInstaller01009.dll'. flq: Copying 'F:\Users\ALEXBA~1\AppData\Local\Temp\{5da5e23e-2f82-2b4f-b73d-9d77c2978b0e}\amd64\WinUSBCoInstaller2.dll' to 'F:\Windows\System32\DriverStore\Temp\{30801e6d-d30f-2f4b-87dc-c80122d5f248}\amd64\WinUSBCoInstaller2.dll'. flq: Copying 'F:\Users\ALEXBA~1\AppData\Local\Temp\{5da5e23e-2f82-2b4f-b73d-9d77c2978b0e}\android_winusb.inf' to 'F:\Windows\System32\DriverStore\Temp\{30801e6d-d30f-2f4b-87dc-c80122d5f248}\android_winusb.inf'. flq: Copying 'F:\Users\ALEXBA~1\AppData\Local\Temp\{5da5e23e-2f82-2b4f-b73d-9d77c2978b0e}\androidwinusba64.cat' to 'F:\Windows\System32\DriverStore\Temp\{30801e6d-d30f-2f4b-87dc-c80122d5f248}\androidwinusba64.cat'. sto: {DRIVERSTORE IMPORT VALIDATE} 20:15:20.875 sig: {_VERIFY_FILE_SIGNATURE} 20:15:20.881 sig: Key = android_winusb.inf sig: FilePath = F:\Windows\System32\DriverStore\Temp\{30801e6d-d30f-2f4b-87dc-c80122d5f248}\android_winusb.inf sig: Catalog = F:\Windows\System32\DriverStore\Temp\{30801e6d-d30f-2f4b-87dc-c80122d5f248}\androidwinusba64.cat ! sig: Verifying file against specific (valid) catalog failed! (0x800b0109) ! sig: Error 0x800b0109: A certificate chain processed, but terminated in a root certificate which is not trusted by the trust provider. sig: {_VERIFY_FILE_SIGNATURE exit(0x800b0109)} 20:15:20.893 sig: {_VERIFY_FILE_SIGNATURE} 20:15:20.893 sig: Key = android_winusb.inf sig: FilePath = F:\Windows\System32\DriverStore\Temp\{30801e6d-d30f-2f4b-87dc-c80122d5f248}\android_winusb.inf sig: Catalog = F:\Windows\System32\DriverStore\Temp\{30801e6d-d30f-2f4b-87dc-c80122d5f248}\androidwinusba64.cat sig: Success: File is signed in Authenticode(tm) catalog. sig: Error 0xe0000242: The publisher of an Authenticode(tm) signed catalog has not yet been established as trusted. sig: {_VERIFY_FILE_SIGNATURE exit(0xe0000242)} 20:15:20.907 ! sig: Driver package signer is unknown, but user trusts signer. sto: {DRIVERSTORE IMPORT VALIDATE: exit(0x00000000)} 20:15:22.701 sig: Signer Score = 0x0F000000 sig: Signer Name = Google Inc sto: {DRIVERSTORE IMPORT BEGIN} 20:15:22.702 sto: {DRIVERSTORE IMPORT BEGIN: exit(0x00000000)} 20:15:22.702 cpy: {Copy Directory: F:\Windows\System32\DriverStore\Temp\{30801e6d-d30f-2f4b-87dc-c80122d5f248}} 20:15:22.703 cpy: Target Path = F:\Windows\System32\DriverStore\FileRepository\android_winusb.inf_amd64_f7c4b212c9d862a3 cpy: {Copy Directory: F:\Windows\System32\DriverStore\Temp\{30801e6d-d30f-2f4b-87dc-c80122d5f248}\amd64} 20:15:22.704 cpy: Target Path = F:\Windows\System32\DriverStore\FileRepository\android_winusb.inf_amd64_f7c4b212c9d862a3\amd64 cpy: {Copy Directory: exit(0x00000000)} 20:15:22.705 cpy: {Copy Directory: exit(0x00000000)} 20:15:22.706 ! sto: Unable to determine if driver package 'android_winusb.inf' is already registered. Error = 0x000003F9 idb: {Register Driver Package: F:\Windows\System32\DriverStore\FileRepository\android_winusb.inf_amd64_f7c4b212c9d862a3\android_winusb.inf} 20:15:22.707 !!! idb: Failed to create driver package object 'android_winusb.inf_amd64_f7c4b212c9d862a3' in DRIVERS database node. Error = 0x000003F9 !!! idb: Failed to register driver package 'F:\Windows\System32\DriverStore\FileRepository\android_winusb.inf_amd64_f7c4b212c9d862a3\android_winusb.inf'. Error = 0x000003F9 idb: {Register Driver Package: exit(0x000003f9)} 20:15:22.709 sto: {DRIVERSTORE IMPORT END} 20:15:22.710 sto: {DRIVERSTORE IMPORT END: exit(0x000003f9)} 20:15:22.710 sto: Rolled back driver package import. !!! sto: Failed to import driver package into Driver Store. Error = 0x000003F9 sto: {Stage Driver Package: exit(0x000003f9)} 20:15:22.736 sto: {Import Driver Package: exit(0x000003f9)} 20:15:22.766

  Read the article

• nikto probe warning messages

  - by julio

  Hi-- I have a pretty standard VPS running Ubuntu 8.1, Apache 2.2, PHP 5 etc. -- standard Lamp stack. I am using suhosin and have tried my best to plug the obvious stuff, since I'm the only user-- there's no SSH access except via pubkey on a non-standard port, there's no root access by SSH, no FTP server running, iptables is set to discard anything outside of basically port 80 or my SSH port (there's no mail server or anything else). However, I've still been compromised (not badly as far as I can tell) probably by a SQL injection. I've locked down the SQL user (there's only one outside of root, and he's got limited priv, no file etc.) So I ran nikto to see what I'm doing wrong, and there's a list of things I've never seen, and can't find using "find" or any other method I'm aware of. See below: + /autologon.html?10514: Remotely Anywhere 5.10.415 is vulnerable to XSS attacks that can lead to cookie theft or privilege escalation. This is typically found on port 2000. + /servlet/webacc?User.html=noexist: Netware web access may reveal full path of the web server. Apply vendor patch or upgrade. + OSVDB-35878: /modules.php?name=Members_List&letter='%20OR%20pass%20LIKE%20'a%25'/*: PHP Nuke module allows user names and passwords to be viewed. + OSVDB-3092: /sitemap.xml: This gives a nice listing of the site content. + OSVDB-12184: /index.php?=PHPB8B5F2A0-3C92-11d3-A3A9-4C7B08C10000: PHP reveals potentially sensitive information via certain HTTP requests which contain specific QUERY strings. + OSVDB-12184: /some.php?=PHPE9568F36-D428-11d2-A769-00AA001ACF42: PHP reveals potentially sensitive information via certain HTTP requests which contain specific QUERY strings. + OSVDB-12184: /some.php?=PHPE9568F34-D428-11d2-A769-00AA001ACF42: PHP reveals potentially sensitive information via certain HTTP requests which contain specific QUERY strings. + OSVDB-12184: /some.php?=PHPE9568F35-D428-11d2-A769-00AA001ACF42: PHP reveals potentially sensitive information via certain HTTP requests which contain specific QUERY strings. + OSVDB-3092: /administrator/: This might be interesting... + OSVDB-3092: /Agent/: This might be interesting... + OSVDB-3092: /includes/: This might be interesting... + OSVDB-3092: /logs/: This might be interesting... + OSVDB-3092: /tmp/: This might be interesting... + ERROR: /servlet/Counter returned an error: error reading HTTP response + OSVDB-3268: /icons/: Directory indexing is enabled: /icons + OSVDB-3268: /images/: Directory indexing is enabled: /images + OSVDB-3299: /forumscalendar.php?calbirthdays=1&action=getday&day=2001-8-15&comma=%22;echo%20'';%20echo%20%60id%20%60;die();echo%22: Vbulletin allows remote command execution. See link + OSVDB-3299: /forumzcalendar.php?calbirthdays=1&action=getday&day=2001-8-15&comma=%22;echo%20'';%20echo%20%60id%20%60;die();echo%22: Vbulletin allows remote command execution. See link + OSVDB-3299: /htforumcalendar.php?calbirthdays=1&action=getday&day=2001-8-15&comma=%22;echo%20'';%20echo%20%60id%20%60;die();echo%22: Vbulletin allows remote command execution. See link + OSVDB-3299: /vbcalendar.php?calbirthdays=1&action=getday&day=2001-8-15&comma=%22;echo%20'';%20echo%20%60id%20%60;die();echo%22: Vbulletin allows remote command execution. See link + OSVDB-3299: /vbulletincalendar.php?calbirthdays=1&action=getday&day=2001-8-15&comma=%22;echo%20'';%20echo%20%60id%20%60;die();echo%22: Vbulletin allows remote command execution. See link + OSVDB-6659: /kCKAowoWuZkKCUPH7Mr675ILd9hFg1lnyc1tWUuEbkYkFCpCdEnCKkkd9L0bY34tIf9l6t2owkUp9nI5PIDmQzMokDbp71QFTZGxdnZhTUIzxVrQhVgwmPYsMK7g34DURzeiy3nyd4ezX5NtUozTGqMkxDrLheQmx4dDYlRx0vKaX41JX40GEMf21TKWxHAZSUxjgXUnIlKav58GZQ5LNAwSAn13l0w<font%20size=50>DEFACED<!--//--: MyWebServer 1.0.2 is vulnerable to HTML injection. Upgrade to a later version. I understand about the trace and index, but what about the vbulletin and autologin? I've searched, and I can't find any files like that on the server. I have no idea about the "MyWebServer" stuff, the PHP Nuke, or the Netware/servlet stuff-- there's nothing really on the server except a pretty standard Joomla site (updated to the latest version). Any help with these messages and/or what I'm doing wrong is very much appreciated.

  Read the article

• Samba with remote LDAP authentication doesn`t see users properly

  - by LucasBr

  I'm trying to setup a samba server authenticated by a remote LDAP server, and I'm having some problems that I can't figure how to solve. I was able to make an getent passwd at samba server and I could see all users at ldapserver, but when I tried to access \\SAMBASERVER at my windows box I had this at the /var/log/samba/log.mywindowsbox: <...snip...> [2012/10/19 13:05:22.449684, 2] smbd/sesssetup.c:1413(setup_new_vc_session) setup_new_vc_session: New VC == 0, if NT4.x compatible we would close all old resources. [2012/10/19 13:05:22.449692, 3] smbd/sesssetup.c:1212(reply_sesssetup_and_X_spnego) Doing spnego session setup [2012/10/19 13:05:22.449701, 3] smbd/sesssetup.c:1254(reply_sesssetup_and_X_spnego) NativeOS=[] NativeLanMan=[] PrimaryDomain=[] [2012/10/19 13:05:22.449717, 3] libsmb/ntlmssp.c:747(ntlmssp_server_auth) Got user=[lucas] domain=[BUSINESS] workstation=[MYWINDOWSBOX] len1=24 len2=24 [2012/10/19 13:05:22.449747, 3] auth/auth.c:216(check_ntlm_password) check_ntlm_password: Checking password for unmapped user [BUSINESS]\[lucas]@[MYWINDOWSBOX] with the new password interface [2012/10/19 13:05:22.449759, 3] auth/auth.c:219(check_ntlm_password) check_ntlm_password: mapped user is: [SAMBASERVER]\[lucas]@[MYWINDOWSBOX] [2012/10/19 13:05:22.449773, 3] smbd/sec_ctx.c:210(push_sec_ctx) push_sec_ctx(0, 0) : sec_ctx_stack_ndx = 1 [2012/10/19 13:05:22.449783, 3] smbd/uid.c:429(push_conn_ctx) push_conn_ctx(0) : conn_ctx_stack_ndx = 0 [2012/10/19 13:05:22.449791, 3] smbd/sec_ctx.c:310(set_sec_ctx) setting sec ctx (0, 0) - sec_ctx_stack_ndx = 1 [2012/10/19 13:05:22.449922, 2] lib/smbldap.c:950(smbldap_open_connection) smbldap_open_connection: connection opened [2012/10/19 13:05:23.001517, 3] lib/smbldap.c:1166(smbldap_connect_system) ldap_connect_system: successful connection to the LDAP server [2012/10/19 13:05:23.007713, 3] smbd/sec_ctx.c:418(pop_sec_ctx) pop_sec_ctx (0, 0) - sec_ctx_stack_ndx = 0 [2012/10/19 13:05:23.007733, 3] auth/auth_sam.c:399(check_sam_security) check_sam_security: Couldn't find user 'lucas' in passdb. [2012/10/19 13:05:23.007743, 2] auth/auth.c:314(check_ntlm_password) check_ntlm_password: Authentication for user [lucas] -> [lucas] FAILED with error NT_STATUS_NO_SUCH_USER [2012/10/19 13:05:23.007760, 3] smbd/error.c:80(error_packet_set) error packet at smbd/sesssetup.c(111) cmd=115 (SMBsesssetupX) NT_STATUS_LOGON_FAILURE [2012/10/19 13:05:23.010469, 3] smbd/process.c:1489(process_smb) Transaction 3 of length 142 (0 toread) <...snip...> /etc/samba/smb.conf file follows: [global] dos charset = 850 unix charset = LOCALE workgroup = BUSINESS netbios name = SAMBASERVER bind interfaces only = true interfaces = lo eth0 eth1 smb ports = 139 hosts deny = All hosts allow = 192.168.78. 192.168.255. 127.0.0.1 10.149.122. 192.168.0. name resolve order = wins bcast hosts log level = 3 syslog = 0 log file = /var/log/samba/log.%m max log size = 100000 domain logons = No wins support = Yes wins proxy = No client ntlmv2 auth = Yes lanman auth = Yes ntlm auth = Yes dns proxy = Yes time server = Yes security = user encrypt passwords = Yes obey pam restrictions = Yes ldap password sync = Yes unix password sync = Yes passdb backend = ldapsam:"ldap://192.168.78.206" ldap ssl = off ldap admin dn = uid=root,ou=Users,dc=business,dc=intranet ldap suffix = ldap group suffix = ou=Groups ldap user suffix = ou=Users ldap machine suffix = ou=Computers ldap idmap suffix = ou=Idmap ldap delete dn = Yes add user script = /usr/sbin/smbldap-useradd -m "%u" delete user script = /usr/sbin/smbldap-userdel "%u" add group script = /usr/sbin/smbldap-groupadd -p "%g" delete group script = /usr/sbin/smbldap-groupdel "%g" add user to group script = /usr/sbin/smbldap-groupmod -m "%u" "%g" delete user from group script = /usr/sbin/smbldap-groupmod -x "%u" "%g" set primary group script = /usr/sbin/smbldap-usermod -g "%g" "%u" add machine script = /usr/sbin/smbldap-useradd -W -t5 "%u" idmap backend = ldap:"ldap://192.168.78.206" idmap uid = 16777216-33554431 idmap gid = 16777216-33554431 load printers = No printcap name = /dev/null map acl inherit = Yes map untrusted to domain = Yes enable privileges = Yes veto files = /lost+found/ /publicftp/ So, \\SAMBASERVER says he couldn't find my user, but I can see it by getent passwd . What I can do in order to SAMBASERVER see and authenticate my user? Thanks in advance!

  Read the article

• got VPN l2l connect between a site & HQ but not traffice using ASA5505 on both ends

  - by vinlata

  Hi, Could anyone see what did I do wrong here? this is one configuration of site1 to HQ on ASA5505, I can get connected but seems like no traffic going (allowed) between them, could it be a NAT issue? any helps would much be appreciated Thanks interface Vlan1 nameif inside security-level 100 ip address 172.30.205.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address pppoe setroute ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 shutdown ! interface Ethernet0/3 shutdown ! interface Ethernet0/4 shutdown ! interface Ethernet0/5 shutdown ! interface Ethernet0/6 shutdown ! interface Ethernet0/7 shutdown ! passwd .dIuXDIYzD6RSHz7 encrypted ftp mode passive dns server-group DefaultDNS domain-name errg.net object-group network HQ network-object 172.22.0.0 255.255.0.0 network-object 172.22.0.0 255.255.128.0 network-object 172.22.0.0 255.255.255.128 network-object 172.22.1.0 255.255.255.128 network-object 172.22.1.0 255.255.255.0 access-list inside_access_in extended permit ip any any access-list outside_access_in extended permit icmp any any echo-reply access-list outside_20_cryptomap extended permit ip 172.30.205.0 255.255.255.0 o bject-group HQ access-list inside_nat0_outbound extended permit ip 172.30.205.0 255.255.255.0 o bject-group HQ access-list policy-nat extended permit ip 172.30.205.0 255.255.255.0 172.22.0.0 255.255.0.0 pager lines 24 logging asdm informational mtu inside 1500 mtu outside 1500 icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 nat-control global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) 172.30.205.0 access-list policy-nat access-group inside_access_in in interface inside access-group outside_access_in in interface outside timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout uauth 0:05:00 absolute username errgadmin password Os98gTdF8BZ0X2Px encrypted privilege 15 http server enable http 64.42.2.224 255.255.255.240 outside http 172.22.0.0 255.255.0.0 outside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto map outside_map 190 match address outside_20_cryptomap crypto map outside_map 190 set pfs crypto map outside_map 190 set peer 66.7.249.109 crypto map outside_map 190 set transform-set ESP-3DES-SHA crypto map outside_map 190 set phase1-mode aggressive crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 30 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 crypto isakmp policy 65535 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 crypto isakmp nat-traversal 190 crypto isakmp ipsec-over-tcp port 10000 tunnel-group 66.7.249.109 type ipsec-l2l tunnel-group 66.7.249.109 ipsec-attributes pre-shared-key * telnet timeout 5 ssh 172.30.205.0 255.255.255.0 inside ssh 172.22.0.0 255.255.0.0 outside ssh 64.42.2.224 255.255.255.240 outside ssh 172.25.0.0 255.255.128.0 outside ssh timeout 5 console timeout 0 management-access inside vpdn group PPPoEx request dialout pppoe vpdn group PPPoEx localname [email protected] vpdn group PPPoEx ppp authentication pap vpdn username [email protected] password ********* dhcpd address 172.30.205.100-172.30.205.131 inside dhcpd dns 172.22.0.133 68.94.156.1 interface inside dhcpd wins 172.22.0.133 interface inside dhcpd domain errg.net interface inside dhcpd enable inside ! ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect netbios inspect rsh inspect rtsp inspect skinny inspect esmtp inspect sqlnet inspect sunrpc inspect tftp inspect sip inspect xdmcp ! end

  Read the article

• Custom View embed in Gallery crashes while key press

  - by tao

  Hi there, I'd like to find some stuff to replace the Tab component, so I'd make a custom View named StringView, which has the ability to display text, and to embed it into a Gallery. But it always crashes with error "NullPointerException at InputMethodManager". I have no idea about this, any help&tip&suggest are appreciate. Detail of my issue: First I'd created a class StringView extends View: public class StringView extends View { protected final Paint mPaint = new Paint(Paint.ANTI_ALIAS_FLAG); protected String mString; protected int mAscent; // Constructor public StringView(Context context, String string) { super(context); mPaint.setARGB(255, 255, 60, 10); mPaint.setTextSize(30); //mPaint.setFakeBoldText(true); mString = string; setPadding(20,15,20,15); } @Override protected void onDraw(Canvas canvas) { super.onDraw(canvas); int w = this.getPaddingLeft(); int h = this.getPaddingTop() - mAscent; canvas.drawText(mString, w, h, mPaint); } public void setString(String str) { mString = str; this.requestLayout(); this.invalidate(); } public String getString() { return mString; } @Override protected void onMeasure(int widthMeasureSpec, int heightMeasureSpec) { setMeasuredDimension(measureWidth(widthMeasureSpec), measureHeight(heightMeasureSpec)); } /** * Determines the width of this view * @param measureSpec A measureSpec packed into an int * @return The width of the view, honoring constraints from measureSpec */ private int measureWidth(int measureSpec) { int result = 0; int specMode = MeasureSpec.getMode(measureSpec); int specSize = MeasureSpec.getSize(measureSpec); if (specMode == MeasureSpec.EXACTLY) { // We were told how big to be result = specSize; } else { // Measure the text result = (int) mPaint.measureText(mString) + getPaddingLeft() + getPaddingRight(); if (specMode == MeasureSpec.AT_MOST) { // Respect AT_MOST value if that was what is called for by measureSpec result = Math.min(result, specSize); } } return result; } /** * Determines the height of this view * @param measureSpec A measureSpec packed into an int * @return The height of the view, honoring constraints from measureSpec */ private int measureHeight(int measureSpec) { int result = 0; int specMode = MeasureSpec.getMode(measureSpec); int specSize = MeasureSpec.getSize(measureSpec); mAscent = (int) mPaint.ascent(); if (specMode == MeasureSpec.EXACTLY) { // We were told how big to be result = specSize; } else { // Measure the text (beware: ascent is a negative number) result = (int) (-mAscent + mPaint.descent()) + getPaddingTop() + getPaddingBottom(); if (specMode == MeasureSpec.AT_MOST) { // Respect AT_MOST value if that was what is called for by measureSpec result = Math.min(result, specSize); } } return result; } } Second I put it in to Gallery through Adapter Gallery gallery = (Gallery) findViewById(R.id.gallery); gallery.setAdapter(new ImageAdapter(this)); ImageAdapter: public class ImageAdapter extends BaseAdapter { int mGalleryItemBackground; private Context mContext; private View[] mImages = genSerielImageViews(); public ImageAdapter(Context c) { mContext = c; TypedArray a = obtainStyledAttributes(R.styleable.Gallery); mGalleryItemBackground = a.getResourceId( R.styleable.Gallery_android_galleryItemBackground, 0); a.recycle(); } private View[] genSerielImageViews() { if (true) { int N = 6; StringView[] views = new StringView[N]; for (int i=0; i<N; i++) { views[i] = new StringView(mContext, "ITEM #" + Integer.toString(i) ); } return views; } else { int N = 6; TextView[] views = new TextView[N]; for (int i=0; i<N; i++) { views[i] = new TextView( mContext ); views[i].setText("CCTV #" + Integer.toString(i) ); } return views; } } public int getCount() { return mImages.length; } public Object getItem(int position) { return position; } public long getItemId(int position) { return position; } public View getView(int position, View convertView, ViewGroup parent) { return mImages[position]; } } Then Compile&Run, press keypad RIGHT and I got a crash, It's turns out a weird InputMethodManager error: 03-18 07:22:33.568: ERROR/AndroidRuntime(958): Uncaught handler: thread main exiting due to uncaught exception 03-18 07:22:33.648: ERROR/AndroidRuntime(958): java.lang.NullPointerException 03-18 07:22:33.648: ERROR/AndroidRuntime(958): at android.view.inputmethod.InputMethodManager.startInputInner(InputMethodManager.java:940) 03-18 07:22:33.648: ERROR/AndroidRuntime(958): at android.view.inputmethod.InputMethodManager.checkFocus(InputMethodManager.java:1114) 03-18 07:22:33.648: ERROR/AndroidRuntime(958): at android.view.ViewRoot.handleMessage(ViewRoot.java:1869) 03-18 07:22:33.648: ERROR/AndroidRuntime(958): at android.os.Handler.dispatchMessage(Handler.java:99) 03-18 07:22:33.648: ERROR/AndroidRuntime(958): at android.os.Looper.loop(Looper.java:123) 03-18 07:22:33.648: ERROR/AndroidRuntime(958): at android.app.ActivityThread.main(ActivityThread.java:4310) 03-18 07:22:33.648: ERROR/AndroidRuntime(958): at java.lang.reflect.Method.invokeNative(Native Method) 03-18 07:22:33.648: ERROR/AndroidRuntime(958): at java.lang.reflect.Method.invoke(Method.java:521) 03-18 07:22:33.648: ERROR/AndroidRuntime(958): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:860) 03-18 07:22:33.648: ERROR/AndroidRuntime(958): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:618) 03-18 07:22:33.648: ERROR/AndroidRuntime(958): at dalvik.system.NativeStart.main(Native Method) Thanks.

  Read the article

• Windows 7 doesn't boot after Ubuntu install

  - by Omu

  I had windows 7 installed on my pc, then I installed Ubuntu 10.10/ During the installation process I have chosen to manually set my partitions: I set a 10GB drive for ubuntu root 1GB drive for swap and for boot drive I've chosen the one used by windows 7 Now I can boot ubuntu, I have the windows 7 option in the boot list, but when I choose Windows 7, it shows me a black screen for a second and returns back to boot screen. Boot Info Script 0.55 dated February 15th, 2010 ============================= Boot Info Summary: ============================== = Windows is installed in the MBR of /dev/sda sda1: _________________________________________________________________________ File system: ntfs Boot sector type: Grub 2 Boot sector info: Grub 2 is installed in the boot sector of sda1 and looks at sector 304908237 of the same hard drive for core.img, but core.img can not be found at this location. No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files/dirs: /bootmgr /Boot/BCD /Windows/System32/winload.exe sda2: _________________________________________________________________________ File system: ntfs Boot sector type: Windows XP Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files/dirs: sda3: _________________________________________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: sda5: _________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 10.10 Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sda4: _________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: =========================== Drive/Partition Info: ============================= Drive: sda ___________________ _____________________________________________________ Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start End Size Id System /dev/sda1 * 63 62,894,474 62,894,412 7 HPFS/NTFS /dev/sda2 62,894,478 291,579,749 228,685,272 7 HPFS/NTFS /dev/sda3 291,579,811 309,157,937 17,578,127 5 Extended /dev/sda5 291,579,813 309,157,937 17,578,125 83 Linux /dev/sda4 309,159,936 312,580,095 3,420,160 82 Linux swap / Solaris blkid -c /dev/null: ____________________________________________________________ Device UUID TYPE LABEL /dev/sda1 1266BB2766BB0A8D ntfs /dev/sda2 BEDBF1147C76F703 ntfs DATA /dev/sda3: PTTYPE="dos" /dev/sda4 dd38226d-c7c9-4ae5-a726-6d18d34a22e4 swap /dev/sda5 e1dafd1c-f855-406b-8f9a-f9d527c70255 ext4 /dev/sda: PTTYPE="dos" ============================ "mount | grep ^/dev output: =========================== Device Mount_Point Type Options /dev/sda5 / ext4 (rw,errors=remount-ro,commit=0) =========================== sda5/boot/grub/grub.cfg: =========================== # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga } insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set e1dafd1c-f855-406b-8f9a-f9d527c70255 if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=640x480 load_video insmod gfxterm fi terminal_output gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set e1dafd1c-f855-406b-8f9a-f9d527c70255 set locale_dir=($root)/boot/grub/locale set lang=en insmod gettext if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### menuentry 'Ubuntu, with Linux 2.6.35-22-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set e1dafd1c-f855-406b-8f9a-f9d527c70255 linux /boot/vmlinuz-2.6.35-22-generic root=UUID=e1dafd1c-f855-406b-8f9a-f9d527c70255 ro quiet splash initrd /boot/initrd.img-2.6.35-22-generic } menuentry 'Ubuntu, with Linux 2.6.35-22-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set e1dafd1c-f855-406b-8f9a-f9d527c70255 echo 'Loading Linux 2.6.35-22-generic ...' linux /boot/vmlinuz-2.6.35-22-generic root=UUID=e1dafd1c-f855-406b-8f9a-f9d527c70255 ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.35-22-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set e1dafd1c-f855-406b-8f9a-f9d527c70255 linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set e1dafd1c-f855-406b-8f9a-f9d527c70255 linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows 7 (loader) (on /dev/sda1)" { insmod part_msdos insmod ntfs set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set 1266bb2766bb0a8d chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### =============================== sda5/etc/fstab: =============================== # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # proc /proc proc nodev,noexec,nosuid 0 0 /dev/sda5 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda4 during installation UUID=dd38226d-c7c9-4ae5-a726-6d18d34a22e4 none swap sw 0 0 =================== sda5: Location of files loaded by Grub: =================== 156.1GB: boot/grub/core.img 156.3GB: boot/grub/grub.cfg 149.9GB: boot/initrd.img-2.6.35-22-generic 156.3GB: boot/vmlinuz-2.6.35-22-generic 149.9GB: initrd.img 156.3GB: vmlinuz

  Read the article

• flash creates more than one http request

  - by MilanAleksic

  We are facing one issue directly connected with our Flash API we've given to a 3rd party flash vendor. To make a long story short, our API basically wraps domain logic on client and creates a single POST request towards the server in JSON format. All will be ok except in combination MacOS + Safari we receive double requests on server (?). Even more interesting, we are receiving different agent names - one is expected name/decriptor of the browser and system, other is "CFNetwork". POST /RuntimeDelegate.ashx - 80 Mozilla/5.0+(Macintosh;+U;+Intel+Mac+OS+X+10_4_11;+fr)+AppleWebKit/531.22.7+(KHTML,+like+Gecko)+Version/4.0.5+Safari/531.22.7 200 0 0 POST /RuntimeDelegate.ashx - 80 CFNetwork/129.24 200 0 0 POST /RuntimeDelegate.ashx - 80 Mozilla/5.0+(Macintosh;+U;+Intel+Mac+OS+X+10_4_11;+fr)+AppleWebKit/531.22.7+(KHTML,+like+Gecko)+Version/4.0.5+Safari/531.22.7 200 0 0 POST /RuntimeDelegate.ashx - 80 Mozilla/5.0+(Macintosh;+U;+Intel+Mac+OS+X+10_4_11;+fr)+AppleWebKit/531.22.7+(KHTML,+like+Gecko)+Version/4.0.5+Safari/531.22.7 200 0 0 POST /RuntimeDelegate.ashx - 80 CFNetwork/129.24 200 0 0 POST /RuntimeDelegate.ashx - 80 Mozilla/5.0+(Macintosh;+U;+Intel+Mac+OS+X+10_4_11;+fr)+AppleWebKit/531.22.7+(KHTML,+like+Gecko)+Version/4.0.5+Safari/531.22.7 200 0 0 POST /RuntimeDelegate.ashx - 80 CFNetwork/129.24 200 0 0 POST /RuntimeDelegate.ashx - 80 CFNetwork/129.24 200 0 0 Has anyone encounter anything like this before?

  Read the article

• How to Save data in txt file in MATLAB

  - by Jessy

  I have 3 txt files s1.txt, s2.txt, s3.txt.Each have the same format and number of data.I want to combine only the second column of each of the 3 files into one file. Before I combine the data, I sorted it according to the 1st column: UnSorted file: s1.txt s2.txt s3.txt 1 23 2 33 3 22 4 32 4 32 2 11 5 22 1 10 5 28 2 55 8 11 7 11 Sorted file: s1.txt s2.txt s3.txt 1 23 1 10 2 11 2 55 2 33 3 22 4 32 4 32 5 28 5 22 8 11 7 11 Here is the code I have so far: BaseFile ='s' n=3 fid=fopen('RT.txt','w'); for i=1:n %Open each file consecutively d(i)=fopen([BaseFile num2str(i)'.txt']); %read data from file A=textscan(d(i),'%f%f') a=A{1} b=A{2} ab=[a,b]; %sort the data according to the 1st column B=sortrows(ab,1); %delete the 1st column after being sorted B(:,1)=[] %write to a new file fprintf(fid,'%d\n',B'); %close (d(i)); end fclose(fid); How can I get the output in the new txt file in this format? 23 10 11 55 33 22 32 32 28 22 11 11 instead of this format? 23 55 32 22 10 33 32 11 11 22 28 11

  Read the article

• When I restart my virtual enviorment it does not re-bind to the IP address

  - by RoboTamer

  The IP does no longer respond to a remote ping With restart I mean: lxc-stop -n vm3 lxc-start -n vm3 -f /etc/lxc/vm3.conf -d -- /etc/network/interfaces auto lo iface lo inet loopback up route add -net 127.0.0.0 netmask 255.0.0.0 dev lo down route add -net 127.0.0.0 netmask 255.0.0.0 dev lo # device: eth0 auto eth0 iface eth0 inet manual auto br0 iface br0 inet static address 192.22.189.58 netmask 255.255.255.248 gateway 192.22.189.57 broadcast 192.22.189.63 bridge_ports eth0 bridge_fd 0 bridge_hello 2 bridge_maxage 12 bridge_stp off post-up ip route add 192.22.189.59 dev br0 post-up ip route add 192.22.189.60 dev br0 post-up ip route add 192.22.189.61 dev br0 post-up ip route add 192.22.189.62 dev br0 -- /etc/lxc/vm3.conf lxc.utsname = vm3 lxc.rootfs = /var/lib/lxc/vm3/rootfs lxc.tty = 4 #lxc.pts = 1024 # pseudo tty instance for strict isolation lxc.network.type = veth lxc.network.flags = up lxc.network.link = br0 lxc.network.name = eth0 lxc.network.mtu = 1500 #lxc.cgroup.cpuset.cpus = 0 # security parameter lxc.cgroup.devices.deny = a # Deny all access to devices lxc.cgroup.devices.allow = c 1:3 rwm # dev/null lxc.cgroup.devices.allow = c 1:5 rwm # dev/zero lxc.cgroup.devices.allow = c 5:1 rwm # dev/console lxc.cgroup.devices.allow = c 5:0 rwm # dev/tty lxc.cgroup.devices.allow = c 4:0 rwm # dev/tty0 lxc.cgroup.devices.allow = c 4:1 rwm # dev/tty1 lxc.cgroup.devices.allow = c 4:2 rwm # dev/tty2 lxc.cgroup.devices.allow = c 1:9 rwm # dev/urandon lxc.cgroup.devices.allow = c 1:8 rwm # dev/random lxc.cgroup.devices.allow = c 136:* rwm # dev/pts/* lxc.cgroup.devices.allow = c 5:2 rwm # dev/pts/ptmx lxc.cgroup.devices.allow = c 254:0 rwm # rtc # mounts point lxc.mount.entry=proc /var/lib/lxc/vm3/rootfs/proc proc nodev,noexec,nosuid 0 0 lxc.mount.entry=devpts /var/lib/lxc/vm3/rootfs/dev/pts devpts defaults 0 0 lxc.mount.entry=sysfs /var/lib/lxc/vm3/rootfs/sys sysfs defaults 0 0

  Read the article

< Previous Page | 6 7 8 9 10 11 12 13 14 15 16 17  | Next Page >