Search Results

Search found 10402 results on 417 pages for 'macbook pro'.

Page 10/417 | < Previous Page | 6 7 8 9 10 11 12 13 14 15 16 17  | Next Page >

  • Macbook Pro (SantaRosa) internal display not detected by graphics card, external monitor OK

    - by BLAU
    My MacBook Pro (2.4 Ghz, Santa Rosa with infamous nVidia card) acts strange. It shows the normal gray screen with Apple logo and animation flawlessly during start up but the internal display goes black without any rendering at all when all is loaded. (shining a light on display show nothing) If an external monitor is connected through the DVI port it will remain black during start up and then show the desktop as the internal display goes black. This happens both while booting to Mountain Lion and Windows XP. I have checked "About my Mac" and only the external display is listed. The same is the case if I use the nVidia Control panel in Windows XP. My questions: Is this a hardware problem or is it related to software maybe even firmware? What controls the display during start up, graphics card or something else?

    Read the article

  • Windows 7 [virtualized] resolutions in Macbook Pro Retina

    - by Trevor Sullivan
    So, I was considering picking up a Macbook Pro Retina, but then I realized that Apple forces you to scale the resolution, so you don't actually see the true benefits of the 2880x1800 display. Instead, you see upscaled, pixelated icons -- I saw this for myself in an Apple store a couple days ago. That's ok though, because the main reason I'd purchase one is to run Windows 7 on it, however I understand that the bootcamp drivers have not been updated to work with the MBP Retina. Instead, the option would be to run Windows 7 virtualized, but I haven't found any conclusive evidence to indicate whether the entire 2880x1800 resolution would act the same virtualize (VMware Fusion, VirtualBox, Parallels) as running Windows 7 natively. My question is: Does Windows 7 see the entire 2880x1800 virtualized, same as running it on bare metal (boot camp)?

    Read the article

  • Why does my macbook pro keep freezing?

    - by mac
    Once in a while my macbook pro 10.8.2 freezes for a couple of seconds, this is really annoying. Mouse gets frozen, I can't move it, and screen gets frozen. These are the last messages from the kernel, how to solve this? Sandbox: sandboxd(38380) deny mach-lookup com.apple.coresymbolicationd Sandbox: sandboxd(38410) deny mach-lookup com.apple.coresymbolicationd Sandbox: sandboxd(38429) deny mach-lookup com.apple.coresymbolicationd Sandbox: sandboxd(38463) deny mach-lookup com.apple.coresymbolicationd Sandbox: sandboxd(38495) deny mach-lookup com.apple.coresymbolicationd Sandbox: sandboxd(38513) deny mach-lookup com.apple.coresymbolicationd Sandbox: sandboxd(38550) deny mach-lookup com.apple.coresymbolicationd Sandbox: sandboxd(38581) deny mach-lookup com.apple.coresymbolicationd Sandbox: sandboxd(38599) deny mach-lookup com.apple.coresymbolicationd CODE SIGNING: cs_invalid_page(0x1000): p=38605[GoogleSoftwareUp] clearing CS_VALID Sandbox: sandboxd(38632) deny mach-lookup com.apple.coresymbolicationd

    Read the article

  • Trouble with external monitor under Windows 7 on MacBook Pro Boot Camp

    - by Colm
    I'm running Windows 7 32-bit on a mid-2010 15" MacBook Pro Intel Core i5 under Boot Camp. I've had trouble getting it to work with my second display and searching Google for an appropriate answer has failed me. I'm on the latest version of Boot Camp - 3.2 - and have updated the drivers for the NVIDIA GeForce GT 330M. The monitor is connected via a VGA cable, and is a Dell ST2410. The monitor is recognised by Windows, which knows it's a Dell and its resolution. The desktop should be extended onto the second monitor - however nothing is showing. It remains black, though it doesn't show a lack of signal coming through which I would have expected. Any ideas what's wrong?

    Read the article

  • Late Model 2011 Macbook Pro with SSD appears to be off somehow

    - by chris
    Ok, I just got a SSD for my Macbook Pro Late-2011. The specs from what I read are that the laptop is capable of 6gbps, so I got myself a OZC Agility 240gb 6gbps SSD. Decided to join the club and speed test it with Blackmagic Disk Speed Test.. and the results are equivilent to that of a 3gbps setup. So.. I am wondering overall is there a configuration setting somewhere I can tweak? The original HD was a 500gb HDD the spinning kind. So I'm figuring maybe thats why there may be a setting somewhere hidden I dunno about that I can tweak, just wanna see if anyone else knows if this is the case. edit should also mention did a fresh factory install, nothing carried over from original hd

    Read the article

  • Screenflick Audio option in MacBook Pro

    - by John
    When after I shut down my MacBook Pro by holding the power button for a few sec, (which I found is bad for the computer, so I will not do anymore) I found that my speaker doesn't play until I plug in and out earphone into the machine. When my speaker is not working like this, and when I am on a random webcam chatting site like chatroulette.com, they can hear the music playing on my iTunes when I choose Screenflick Audio option in the Mic setting. But when the Speaker is working back again, they don't hear the music playing even when I do Screenflick Audio mode. How can I make it work? Also, how do you make the chatting partner hear my music playing on my computer while I talk to them (not via my speaker, since it's bad quality).

    Read the article

  • I can't get my Macbook Pro to print to an IP addressable printer

    - by Pieter
    Running Macbook Pro OS X 10.6.3 Accessing an HP OfficeJet 5610 plugged in the USB port of a US Robotics router. I tried several combinations of: Protocol: Internet Printing Protocol (IPP) Line Printer Daemon (LPD) HP JetDirect (socket) Address: http://192.168.1.10:1631/printers/HP5610 192.168.1.10:1631/printers/HP5610 http://192.168.1.10:1631 192.168.1.10:1631 192.168.1.10 ... Driver: HP OfficeJet 5600 Series Whenever I try to print, it fails while saying "connected to printer" or "Printer is busy...zill try again in X seconds" Both Windows 7 and Windows XP computers on the network can successfully access this printer, identifying it as "HP5610 on http://192.168.1.10:1631/" I tried clearing all tasks and printers (ctrl-click in the menu), and resetting it to (socket, http://192.168.1.10:1631/printers/HP5610, HP5600 series) but to no success.

    Read the article

  • MacBook Pro USB port provides more current in Mac OS X than in Windows

    - by AngryHacker
    I have a MacBook Pro with both Mac OS X Lion and Windows (under BootCamp) installed. While in Windows, I tried to charge my iPad 3 via the USB port. The iPad says "Not charging", but really, it does, just super slow (4-5% per hour). The reason for this is that the iPad requires 2.1 A of current, but a standard USB port provides 0.5 A. However, if I switch to Mac OS X, the iPad states that it is charging and it does at a rate of about 10% per hour. The only takeaway from this is that either OS X puts out more current on the USB port or that it recognizes the iPad and acts accordingly. Can someone provide more information on what is actually happening?

    Read the article

  • Fix two-finger Trackpad Scrolling on a Macbook running Bootcamp

    - by roryok
    This is an issue that's annoyed me for some time. About a year ago, the two-finger scrolling in Windows 7 on my Macbook Pro stopped working. I discovered that a fix for this is to open Bootcamp from the control panel, go to the Trackpad tab, tick and untick "Tap to click" and click ok. This has to be done every time the machine is woken from sleep or rebooted. I'm now using Windows 8 and encountering the same issue. I've tried several different driver revisions, and none have helped. I'm sick of going through the motions. Has anyone got a solution for this?

    Read the article

  • Is there Linux Live USB that works with Snow Leopard macbook pro from 2010 april

    - by rofrol
    Hello, I was searching for a long time a Linux Live USB that I can boot my macbook pro from. Is there such distro so I can install it on Snow Leopard or Windows 7? UPDATE I've found this: "isohybrid" CD images (..) are special in that as well as the normal CD-based ISO9660 filesystem they also contain a valid-looking DOS-style partition table. Thus, if you simply copy one of these images raw to a USB stick a normal PC BIOS will boot the image directly. (...) Finally: I'd like to add support into xorriso for creating the nasty HFS hybrid images that are needed for booting Macs. The code that does this in cdrkit is probably some of the worst that I've ever worked with, and I'd like to get away from it. If only Apple hadn't stupidly built their proprietary platform around this shit and had used open standards instead Source

    Read the article

  • My iPhone, Macbook and Laptop won't connect to 192.168.1.*

    - by 1Rabbit
    Previously I could connect perfectly with my iphone to my web server on 192.168.1.* but since I got a MacBook, I now can't even connect my iphone to either of the computers. I can connect to the wifi hub on my iphone, I can connect to the wifi hub on all the computers including my phone. Neither of my computers nor my iphone 5 can communicate with each other. What has happened? I've tried number of different local web servers, even tried the osx web server, but my iphone just wont connect to any.

    Read the article

  • Getting the keyboard working on a MacBook under Windows XP x64

    - by Theran
    Despite Windows XP Professional x64's unsupported status on MacBooks (model A1181), I've managed to get most of the hardware working by manually installing either the drivers on the OS X Snow Leopard CD, or finding the appropriate drivers online. However, even after installing the Apple keyboard driver from the CD, I can't get Windows to actually use the special driver. Instead, the keyboard just shows up as a generic USB keyboard, with non-functioning Fn and other special keys. Being unable to generate a right-click or Ctrl-Alt-Del makes Windows a bit of a challenge to use. I've tried: uninstalling and reinstalling the keyboard driver removing the keyboard under device manager and letting Windows re-detect it using device manager to manually update the driver How do I get the special functions of the MacBook keyboard working under XP x64?

    Read the article

  • iTunes Update 11.0 will not install on my Macbook

    - by joshkrz
    I try to update my iTunes to version 11 but every time I open iTunes after the restart it shows me an error message that states, "An Unknown Error Occurred (-42408)". The same thing happens when I try to install it using the stand alone installer from the apple website. iTunes still opens but remains as version 10.7 (21) and dosent update. I have tried this numerous times and I keep getting the same results. I have also looked all over online but none of them give me a solution that works. My system is a MacBook Pro (15-inch, Mid 2012), OS X Mountain Lion (10.8.2) Thanks.

    Read the article

  • MacBook Pro battery capacity 65K mAh

    - by Alexander Gladysh
    I have a 15" MacBook Pro 3.1 (that is Late 2007 model AFAIR). I've bought it new a couple of years ago. Recently its on-battery power lifespan became very short (30 to 10 minutes). When my notebook turns itself off due to "low battery" and I press the small button on the battery itself, all LED lights are alight, indicating full charge. When I plug in the power adapter, my Mac displays that "battery is fully charged, finishing charging process" (I have a Russian OS X 10.5.7, so that is a rough translation), but the LEDs on battery itself display (seemingly accurate) status that there are one or two "LEDs still not charged". My battery have as few as 37 recharge cycles (yes, I've neglected calibration over the time I've used it). Battery info programs like iBatt2 report battery capacity of 65 337 mAh (with by-design capacity of 5600 mAh). I get it that something went wrong with battery electronics. I've tried resetting my Mac's PRAM and SMC, it did not changed anything. Now I'm trying to recalibrate the battery, but looks like it does not help as well. Will try to recalibrate it several times in a row. I'd buy a new battery if I knew if it is battery fault, not a notebook's. Any suggestions? Update: After recalibration, my battery status now displays battery capacity of 1500 mAh. But with every recalibration (or simply when I use notebook without power adapter plugged in) this number changes in the range from 200 mAh to 1700 mAh. LEDs on battery now are synchronous with what nodebook thinks on the charge level. Also I've noticed that cycle count changes rather slowly. It is now 39, it was 37 when I've started recalibration, and I went through the process at least ten times... So, the main question is: does it look like that replacing the battery would help me (or does it look like this is notebook's problem)? I guess I should try replacing the battery.

    Read the article

  • Synergy on macbook with osx mavericks wifi connection

    - by user332956
    I'm trying to set up Synergy with my macbook pro running OS X 10.9.3 as a client and my Windows 7 desktop as a server. I'm having some pretty bad connection problems though when I try to use my mac. Every couple seconds the mouse or the keyboard will stop working entirely then come back. I ran some tests and found that the ping from my desktop to my mac would be very high every third ping or so(1000+ ms) or sometimes even time out. If I ping my desktop from my mac the pings are all reasonably low. I believe that this is a power saving feature of Mavericks and I have found a way to get around it by continually pinging my router on my mac, keeping my wifi card from going to sleep. I'm using this right now to type this up with synergy and have had zero issues. Has anyone else ran into this issue and found a better solution? So far, I think my best bet would be to buy an ethernet adapter but I'd rather not have yet another cable running across my desk.

    Read the article

  • Windows 8 auto-hibernate from sleep not working on Retina MacBook Pro

    - by frenchglen
    I have a similar question to this one. Only my context is the 15" Retina MacBook Pro - and Windows 8. I have just the original Mac OS X Mountain Lion on there, then Windows 8 via Bootcamp. no rEFIt installed. (I just press ALT every time I restart windows, actually as a security measure to stop tech-unsavvy thugs, who, if the laptop is stolen, think it's only a mac and don't discover my Windows as quickly as they would've, and by that time I remotely activate various anti-theft mac apps and nab them that way). SO: like the related question asks, why isn't it behaving like it should? The Windows 7 FAQ states: Will sleep eventually drain my laptop battery? If your laptop battery charge gets critically low while the computer is asleep, Windows automatically puts the laptop into hibernation mode. But this is just not happening - on my rMBP Windows 8. It seems EVERY time I set the laptop to sleep (when it reaches 10%), then arriving home and plugging it in and hoping to simply resume my work, it does NOT save the session to disk and I lose ALL my work. Who's fault is it? Win 8's (a bug, grr)? Or Apple's EFI system (maybe fixable via editing EFI options/do I have to install refit to make it work perhaps?) Or maybe changing windows power options can somehow fix the problem? Thanks for your help.

    Read the article

  • Ungrounded laptop (Macbook Pro) buzzes in headphones, weird feeling when fingers brush lightly

    - by donut
    I've got a nearly 3-year-old MacBook Pro 15" 2.16GHz (MacBookPro2,2). When I have am not using the extended, grounded adapter for the power supply, just using the simple, two-prong plug I can hear a buzzing when I use very sensitive earbuds. This goes away if I touch a metal part of the laptop. Also, I can feel a weird, fuzzy feeling when I brush the metal parts of the laptop lightly with my fingers/skin. Somewhat similar to feeling of a touching hair or a balloon that's charged with static electricity. But I'm not getting sparks or anything. And if I'm touching a metal part of my laptop solidly (not just brushing it) and then I touch someone else's skin I can feel the same effect and so can my victim. I've noticed similar effects with an ungrounded electric blanket. But with that the buzzing can be easily heard without headphones. Is this a defect, normal, or something else? And what exactly is happening?

    Read the article

  • Mac Book Pro and Photosohp working canvas lost off screen somewhere

    - by chris
    I seem to have a unique issue. I have a mac book pro which I often have connected to one or 2 additional monitors, and I think this is in part my issue. Cause when Im at home working with only the built in monitor and I go to open something new or existing in photoshop my canvas if you will call it that is no where to be found. I checked my display settings, its treating it as a one monitor solution. I've tried to in photoshop to bring all my windows to front, Ive tried to cascade and tile my windows, ive tried to reset my work area, and to no avail I can't for the life of me get the canvas to come to my screen so I can work with what ever I intend to work on. Anyone else have this problem or run into similar? How did you fix it?

    Read the article

  • Mac Book Pro SSD

    - by LiamB
    I have a Mac Book Pro (I7 and 8 Gig Ram). I'm a developer - do a fair amount of .net via VMware but lots of Ruby and NodeJs on the Mac. I'm looking to extract some more performance and i think a SSD might be a good option. So I have 2 questions, Can I straight up replace the drive thats in there with a SSD or will this cause me problems? I have files on there as well as apps. What are my options in terms of available hardware.

    Read the article

  • Annoying trackpad freeze on MacBook [solved]

    - by Hafthor
    NOTE: Question marked answered because it was forced after being put up for bounty. Actual solution was to have Apple repair it. Trackpad usually works, but sometimes stops responding for around 5 seconds and then suddenly starts working again. Seems to happen when I switch between typing and moving + button-clicking and also when I do a lot of double-clicking. Tried turning off the "Ignore accidental trackpad input". Apple replaced the keyboard/mouse under warranty. Problem remains. Any ideas? Edit: White non-unibody Late-2008 13" MacBook - fully up-to-date OS. Doesn't seem to matter if it is plugged in or not. Edit: Updated to Snow Leopard - seems to have made it worse. Edit: Applying even a little pressure to the left palm rest creates this condition. Apple replaced the top case again and this time it seems to have fixed it. Although, it looks like they may have added a spacer on the left palm rest to "fix" it.

    Read the article

  • 13" MacBook Pro with Win 7 and External VGA gets 640x480

    - by Jim McKeeth
    I have a brand new 13" MacBook Pro - 2.26 GHz and the NVIDIA 9400M Video card. I installed Windows 7 (final) in boot camp and booted up to Windows 7. Installed all the drivers from the Apple disk and it was working great. Then I attached the external VGA adapter (from apple) to connect to a projector and it dropped down at 640x480 resolution. No matter what I did it wouldn't let me change to a higher resolution if the external VGA was connected. Once it disconnects then it goes back to the normal resolution. If I am booted into Snow Leopard it works fine. I tried updating the NVIDIA drivers and it behaved exactly the same. Ultimately I want to get 1024x768 or better resolution when connected to an external display. If it isn't fixable then I am curious if anyone else has seen this, if it is a known issue, and who to contact for support (Apple, Microsoft or NVIDIA?) Update: Just attaching the Mini-DVI to VGA adapter kicks it into 640x480, no projector is required. I tried forcing the display driver from Generic PnP Monitor to one that supported 1024x768 and that didn't work either.

    Read the article

  • How do I fix a super slow MacBook?

    - by MakingScienceFictionFact
    I'm running a black MacBook 4.1. Intel Core 2 Duo @ 2.4 GHz, 2 GB RAM, 250 GB hard disk drive, bus speed is 800 MHz. It's about three years old in excellent shape externally. I treat this thing like a baby. It used to run awesome, but now it's super slow at everything. I get the spinning pizza of death constantly. It takes a long time to boot up or load any program, even Safari and iTunes. iPhoto is terribly slow. The Internet doesn't work properly and it reminds me of a buggy PC. I've formatted it and re-installed Mac OS X 10.6 (with all updates), and I've done the disk repairs process. As an iOS developer this is driving me crazy, but luckily I have an iMac to work on in the day which is fast. I'm ready to format it again, but that didn't work last time. After the last format, I copied back files from an external drive so maybe the offending files were hidden in there somewhere. Here are the hard disk drive and RAM specifications. It is upgrade-able to 4 GB of RAM. Hard disk drive: The Fujitsu Mobile MHY2250BH is a 250 GB, standard hard disk drive. Its burst transfer rate is 150 Mbyte/s. This is a 5400 RPM drive and comes with an 8 MB buffer. RAM: two sticks of 1 GB DDR2 SDRAM, speed: 667 MHz.

    Read the article

  • MacBook Air i5 4 GB RAM shows screen tearing when scrolling in browsers

    - by Sandro Dzneladze
    I see screen tearing pretty often while scrolling webpages up and down, and it has been like this from day 1. But now I purchased an external monitor which is huge (23 inches compared to the Mac's 11), and the effect is more visible. It is driving me nuts and giving me headaches. I wonder if you see the same. I was reading a lot about this problem, and it seems to be present on MacBook Pros as well? Can someone confirm I'm not alone? In other words: I'm deciding weather to go through warranty repair, or if it makes no sense if all of theme exhibit same behavior. It is shame to see this beautiful machine with an insane price tag to be lagging when browsing web, when the processor is just sitting there idle at 4-12%! This is an example I found on Wikipedia that more or less describes what happens when I scroll up down. The effect is not so pronounced and clears when I stop scrolling, but it is sure annoying the hell out of me. Firefox is tearing like hell, Chrome less, Safari exhibits jagged scrolling but less tearing compared to Chrome and Firefox. With synthetic benchmarks I don't see any problems with hardware. But this is not particularly revealing.

    Read the article

  • configure a Macbook Pro to use external monitor at boot (Debian Linux)

    - by Eric
    In the spirit of reuse, I've installed Debian (version 6.0.5 "squeeze") on my wife’s old Macbook Pro (circa 2009 or so), to repurpose it for various tasks. The catch is the display is flaky. It will last a random amount of time, between 2 minutes and 2 hours, before freezing and graying out. This is a known issue with that generation of MBP. Fortunately it’s no problem for me, as I plan to use it with an external monitor anyway. Which brings us to the problem: How do I configure this thing to output to the external display by default, and hopefully disable the built-in LCD? The ideal solution would be to modify a setting in the EFI (BIOS), but I’m not holding out much hope for that. Next best thing would be a kernel option I can pass to the NVIDIA driver. What won’t work is a solution that doesn’t give me a display until X starts. I need to have console access, especially given that the built-in LCD is dying, and any day now might give out completely. So far I haven’t been able to find anything online. lspci says I’ve got an NVIDIA GeForce 9400M Help is much appreciated! Eric PS if this question is better suited to the Unix & Linux area, pls advise and I will move it.

    Read the article

  • Backing up a Windos 7 partition from Macbook with no OS X

    - by mattcodes
    I have a 3 year macbook with Windows 7 installed as 40gb and OS X as 40gb (80gb HD). I want to remove OS X as Im at the limit of 40gb on Windows and I have not logged on to Mac OS X since installed Win7 (dont flame me). So I want to delete OS X partition and expand my win partition to 80gb BUT I still would like to be able to regularly (once a week/month) backup my Windows 7 partition - its took a while to setup everything up right - not just docs and programs - so when the hard drive dies I want to be able to restore the partition and boot away, (the daily volatile bits I can pull down from dropbox and project from soure control). With Mac OS X I could use Winclone - and this worked flawless last time the HD failed with XP but with the absence of OS X I will need something else. Im thinking can I use a Linux Live boot CD along with an external USB hard drive. Boot from CD and then dd? the partition to the USB? What linux distro live CD should I use? I say dd as if I know what am taking about (I dont) is this the best way to backup a partition (when it will be restored to same hardware as bootable) ? What command?

    Read the article

< Previous Page | 6 7 8 9 10 11 12 13 14 15 16 17  | Next Page >