Search Results

Search found 5491 results on 220 pages for 'sound scheme'.

Page 10/220 | < Previous Page | 6 7 8 9 10 11 12 13 14 15 16 17  | Next Page >

• Connect a Laptop with a 5.1 Sound System

  - by mfcabrera

  I will be replacing my desktop computer with a laptop and I would like to connect it to my existing 5.1 sound system. Now, the Sound System have three different input channels, but most laptops only have one sound output channel. what do I need in order to connect my future laptop to my sound system? Do I need a sound card? Example Laptop: ASUS N53JF-XE1 http://www.amazon.com/gp/product/B00492C6TI/ref=ord_cart_shr?ie=UTF8&m=ATVPDKIKX0DER

  Read the article

• Change the Mac notification sound on a per-application basis

  - by Mark Szymanski

  By default on Mac OS X there is a system-wide notification sound that you can choose. This sound is applied to every application and played whenever the application outputs a beep (for instance, when typing a keyboard shortcut that doesn't work, or during a terminal beep). Is there any way to change what sound this is on a per-application basis? Specifically, I'm looking to change the sound Terminal.app uses, while every other app uses another sound.

  Read the article

• OEM sound card with no drivers or support

  - by randy

  I thought my sound card was going out so I bought a sound card online. Everything seemed to work ok, I do have sound. But after a few months, I noticed the extra software that downloaded with the sound card drivers didn't work. I ended up contacting creative and after a month of e-mail support, they asked for the serial number and/or model number. Their reply back was I had purchased an OEM sound card and they could not provide support for that, and informed me that that is why their drivers and software didn't work. They informed me that I had to contact the company that distributed the sound card and install their software. Is there anything I can do to find out who distributed this sound card, or is there anything I can do to get other features to work? I have 4 speakers and a sub but only 2 speakers produce sound. The only control I have is the volume. Creative's driver update program will find my sound card, download updates and even added software, but if I try to click on a downloaded program like Creative's Toolbox or Media Center, I get an error that it cannot find the devise. That is why I contacted creative in the first place. EDIT Thanks for the responses everyone. Here's an update. I thought I'd go thru my old computer stuff for my classes at school. I have a lot of old stuff saved, boxes and cables and stuff. I found the box the sound card came in. It looks like a box you'd buy at the store, like Best Buy or CompUSA. I worked with creative for such a long time, it went past the point of being able to return it to the junk online store this shipped from. The box did have an install CD, so I thought I'd start over to reinstall the drivers and software that shipped with the card. I noticed that the install would uninstall a program, then reinstall it. so I thought things were working out. But no good. Everything still works but the programs were still bad. I'd get an error trying to load them - not found. I'll look on the card the next time I get a chance and see if I can spot any kind of name on it.

  Read the article

• Audio libraries for PC indie games [closed]

  - by bluescrn

  Possible Duplicate: Cross-Platform Audio API Suggestions What options are out there these days for audio playback/mixing in C++? Primarily for Windows, but portability (particularly to Mac and iOS) would be desirable. For a small indie game, potentially commercial, though - so I'm looking for something free/low-cost. My requirements are fairly basic - I don't need 3D sound, or many-channels - simple stereo is fine. Just need to be able to mix sound effects and a music stream, maybe decoding one or more compressed audio formats (.ogg/.mp3 etc), with all the basic controls over looping, pitch, volume, etc. Is OpenAL more-or-less the standard choice, or are there other good options out there?

  Read the article

• Bluetooth headset A2DP works, HSP/HFP not (no sound/no mic)

  - by Stefan Armbruster

  My Philips SBH9001 headset pairs fine using Ubuntu 12.04. In the audio settings it's properly detected as A2DP device and as HSP/HFP device. Hardware: Thinkpad X230, Ubuntu 12.04 64bit, Kernel 3.6.0-030600rc3-generic (build from Ubuntu mainline repo), Bluetooth device is USB-Id 0a5c:21e6 from Broadcom, Headset is a Philips SBH9001. Note: Kernel 3.6 rc3 is used because of a fix for audio on the dockingstation that is not in any previous branches. Playing audio in A2DP works just fine out of the box, but when switching the headset to HSP/HSP mode there is no sound nor does the microphone work. When connecting the headset, /var/log/syslog shows: Aug 25 21:32:47 x230 bluetoothd[735]: Badly formated or unrecognized command: AT+CSRSF=1,1,1,1,1,7 Aug 25 21:32:49 x230 rtkit-daemon[1879]: Successfully made thread 17091 of process 14713 (n/a) owned by '1000' RT at priority 5. Aug 25 21:32:49 x230 rtkit-daemon[1879]: Supervising 4 threads of 1 processes of 1 users. Aug 25 21:32:50 x230 kernel: [ 4860.627585] input: 00:1E:7C:01:73:E1 as /devices/virtual/input/input17 When switching from A2DP (standard profile) to HSP/HFP: Aug 25 21:34:36 x230 bluetoothd[735]: /org/bluez/735/hci0/dev_00_1E_7C_01_73_E1/fd3: fd(34) ready Aug 25 21:34:36 x230 rtkit-daemon[1879]: Successfully made thread 17309 of process 14713 (n/a) owned by '1000' RT at priority 5. Aug 25 21:34:36 x230 rtkit-daemon[1879]: Supervising 4 threads of 1 processes of 1 users. Aug 25 21:34:41 x230 bluetoothd[735]: Audio connection got disconnected Any hints how to get HSP/HFP working here?

  Read the article

• Ubuntu 13.10 No Sound

  - by spiersie

  I was running 13.04 since last monday and just today i upgraded to 13.10, in both of these version i have not managed to get my sound working. I have gone into alsamixer and disabled auto mute and the volumes are up. However if somebody thinks they can help me fix this i will gladly follow any steps. Please lay specifically any terminal commands you need me to do to either show specs or solve the problem as i am not fluent with the linux commands, this desktop being my first system to run linux, starting last monday. blake@Blake-Ubuntu-PC:~$ lspci -v | grep -A7 -i "audio" 00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Trinity HDMI Audio Controller Subsystem: ASUSTeK Computer Inc. Device 8526 Flags: bus master, fast devsel, latency 0, IRQ 53 Memory at fef44000 (32-bit, non-prefetchable) [size=16K] Capabilities: Kernel driver in use: snd_hda_intel 00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 03) (prog-if 30 [XHCI]) 00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01) Subsystem: ASUSTeK Computer Inc. Device 8445 Flags: bus master, slow devsel, latency 32, IRQ 16 Memory at fef40000 (64-bit, non-prefetchable) [size=16K] Capabilities: Kernel driver in use: snd_hda_intel 00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11)

  Read the article

• Scaling Sound Effects and Physics with Framerate

  - by Thomas Bradsworth

  (I'm using XNA and C#) Currently, my game (a shooter) runs flawlessly with 60 FPS (which I developed around). However, if the framerate is changed, there are two major problems: Gunshot sound effects are slower Jumping gets messed up Here's how I play gunshot sounds: update(gametime) { if(leftMouseButton.down) { enqueueBulletForSend(); playGunShot(); } } Now, obviously, the frequency of playGunShot depends on the framerate. I can easily fix the issue if the FPS is higher than 60 FPS by capping the shooting rate of the gun, but what if the FPS is less than 60? At first I thought to just loop and play more gunshots per frame, but I found that this can cause audio clipping or make the bullets fire in "clumps." Now for the second issue: Here's how jumping works in my game: if(jumpKey.Down && canJump) { velocity.Y += 0.224f; } // ... (other code) ... if(!onGround) velocity.Y += GRAVITY_ACCELERATION * elapsedSeconds; position += velocity; The issue here is that at < 60 FPS, the "intermediate" velocity is lost and therefore the character jumps lower. At 60 FPS, the game adds more "intermediate" velocities, and therefore the character jumps higher. For example, at 60 FPS, the following occurs: Velocity increased to 0.224 Not on ground, so velocity decreased by X Position increased by (0.224 - X) <-- this is the "intermediate" velocity At 30 FPS, the following occurs: Velocity increased to 0.224 Not on ground, so velocity decreased by 2X Position increased by (0.224 - 2X) <-- the "intermediate" velocity was lost All help is appreciated!

  Read the article

• HDA NVidia (GT520) - Sound Issue

  - by Oliver Lucas

  I have an GT520 graphics card and I am trying to get the sound working with my XBMC setup and I'm having trouble. Things I have completed: aplay -l List of PLAYBACK Hardware Devices card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 then lspci 01:00.1 Audio device: nVidia Corporation HDMI Audio stub (rev a1) and alsamixer which is set to unmuted Everything looks well, so ran: aplay -D hw:0,3 /home/ollie/Music/alex.mp3 Playing raw data '/home/ollie/Music/alex.mp3' : Unsigned 8 bit, Rate 8000 Hz, Mono aplay: set_params:1059: Sample format non available Available formats: - S16_LE - S32_LE with no luck.. then speaker-test Playback device is default Stream parameters are 48000Hz, S16_LE, 1 channels Using 16 octaves of pink noise Playback open error: -2,No such file or directory also tried running through ftp://download.nvidia.com/XFree86/gpu-hdmi-audio-document/gpu-hdmi-audio.html#upgrading_alsa_driver and http://wiki.xbmc.org/index.php?title=HOW-TO:Setup_audio_over_HDMI_on_nVidia_GeForce/nForce_controller plus 20 other websites with selective "fixes" etc.. but no luck _< I am a complete beginner with Ubuntu so this is a really steep learning curve for me, not sure I'm learning much though as its all just headaches atm! Thanks for any help Ollie

  Read the article

• Using sound forge 6.0 what will be the need to upgrade to latest version

  - by Jayapal Chandran

  I had been using sound forge 6.0 not recently but long back. I edit mp3 files for my purpose and some more filters like flange, pan, fade in out, recording, line in recording, extracting sound from video files (mpg, avi(divx), etc...), increasing the default volume, editing treble and bass effects, and etc... I am not going to use it professionally. I use it just like that. Now when i checked i could see Sound Forge Audio Studio 10 is the latest version for my purpose. Others are too high i think. Besides, i had been using Gold Wave version 4 very extensively just to edit sound files mostly mp3. and here is the reason for me to change to sound forge. It is when we edit mp3 files it deflashes(making it raw i think) before editing. after editing if i save it asks for the format to save and i will choose mp3. At this point it again applies the compression process which makes the sound file lossy. When i did the same with sound forge it did not deflash. It just edited the file as mp3. May be i dont know whether gold wave has the same option. So, please suggest. oh i had asked a question already like this... here it is goldwave vs sound forge in editing mp3 files

  Read the article

• Is there an equivalent to Lisp's "runtime" primitive in Scheme?

  - by Bill the Lizard

  According to SICP section 1.2.6, exercise 1.22: Most Lisp implementations include a primitive called runtime that returns an integer that specifies the amount of time the system has been running (measured, for example, in microseconds). I'm using DrScheme, where runtime doesn't seem to be available, so I'm looking for a good substitute. I found in the PLT-Scheme Reference that there is a current-milliseconds primitive. Does anyone know if there's a timer in Scheme with better resolution?

  Read the article

• No sound after clean install 11.10

  - by Jorge

  First of all, sorry to ask this, I'm sure that this was asked so many times before. Second, sorry for the English, it's not my native language. And Third, thank you in advance. So, I hope the follow info will help, here's a log. http://www.alsa-project.org/db/?f=07089caf530494bc4bc23e1d1cd56b3a5fae03c6 I already check 'System - Preferences - Sound'. Here's a screenshot http://i.imgur.com/Ghwnj.png > jorge@jorge-desktop:~$ sudo lshw -class multimedia > *-multimedia > description: Multimedia audio controller > product: VT8233/A/8235/8237 AC97 Audio Controller > vendor: VIA Technologies, Inc. > physical id: 11.5 > bus info: pci@0000:00:11.5 > version: 60 > width: 32 bits > clock: 33MHz > capabilities: pm cap_list > configuration: driver=VIA 82xx Audio latency=0 > resources: irq:22 ioport:e400(size=256) Tried with no results: > sudo apt-get remove --purge alsa-base > sudo apt-get remove --purge pulseaudio > sudo apt-get clean && sudo apt-get autoremove > sudo apt-get install alsa-base > sudo apt-get install pulseaudio > sudo apt-get install ubuntu-desktop Also > sudo gedit /etc/default/grub > > from: > > GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" > > to: > > GRUB_CMDLINE_LINUX_DEFAULT="quiet splash radeon.audio=1" > > sudo update-grub > > And Reboot... without any result. EDIT: I made sure that everything it's fine with aplay -l and lspci -v and lsmod; and checked alsamixer, it's not in mute. Well I'm running out of ideas. Thanks.

  Read the article

• ALC889 - GA-P55-UD4 -no sound - Ubuntu 11.10

  - by george

  I have computer with a Gigabyte P55A-UD4 motherboard. I have on-board audio - Realtek ALC889. I am using Ubuntu 11.10 and have no sound. please please heeeelp :). i have tryed to install high definition audio codecs from realtek but it doesn't work. in bios the azalia codec is turned on. ps : sorry for my english. 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 12) 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 12) 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06) 00:1a.1 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06) 00:1a.2 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06) 00:1a.7 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) 00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 06) 00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 06) 00:1c.6 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 7 (rev 06) 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06) 00:1d.1 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06) 00:1d.2 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06) 00:1d.3 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06) 00:1d.7 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a6) 00:1f.0 ISA bridge: Intel Corporation 5 Series Chipset LPC Interface Controller (rev 06) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 06) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06) 01:00.0 VGA compatible controller: nVidia Corporation GT216 [GeForce GT 220] (rev a2) 01:00.1 Audio device: nVidia Corporation High Definition Audio Controller (rev a1) 03:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 03:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 04:00.0 IDE interface: Marvell Technology Group Ltd. Device 91a3 (rev 11) 05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) 06:03.0 IDE interface: Integrated Technology Express, Inc. IT8213 IDE Controller 06:07.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) 3f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) 3f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) 3f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) 3f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) 3f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) 3f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) aplay -l karta 0: Intel [HDA Intel], urzadzenie 0: ALC889 Analog [ALC889 Analog] Urzadzenia podrzedne: 1/1 Urzadzenie podrzedne #0: subdevice #0 karta 0: Intel [HDA Intel], urzadzenie 1: ALC889 Digital [ALC889 Digital] Urzadzenia podrzedne: 1/1 Urzadzenie podrzedne #0: subdevice #0 karta 1: NVidia [HDA NVidia], urzadzenie 3: HDMI 0 [HDMI 0] Urzadzenia podrzedne: 1/1 Urzadzenie podrzedne #0: subdevice #0 karta 1: NVidia [HDA NVidia], urzadzenie 7: HDMI 0 [HDMI 0] Urzadzenia podrzedne: 1/1 Urzadzenie podrzedne #0: subdevice #0 karta 1: NVidia [HDA NVidia], urzadzenie 8: HDMI 0 [HDMI 0] Urzadzenia podrzedne: 1/1 Urzadzenie podrzedne #0: subdevice #0 karta 1: NVidia [HDA NVidia], urzadzenie 9: HDMI 0 [HDMI 0] Urzadzenia podrzedne: 1/1 Urzadzenie podrzedne #0: subdevice #0

  Read the article

• windows 7 sound stopped working out of nowhere

  - by jeff

  hi, i have had windows 7 installed for a few months, working fine with soundblaster xi around 7p was watching youtube videos with sound went and made dinner around 9p came back, realized there was no sound coming out of speakers, even though windows mixer shows sound output restarted, no sound uninstalled driver, restarted had windows search for driver, it installed, windows mixer showed sound bar moving while playing an mp3 but couldn't hear i've tested with speakers plugged into soundblaster, as well as headphones plugged into the audio port on the front of my computer. what could have happened? what could the solution be? EDIT wow, check out the crazy similarities between my post and this one: (the solution didn't solve my issue) http://superuser.com/questions/56450/why-would-sound-suddenly-stop-working-on-windows-7/92957#92957

  Read the article

• [MINI HOW-TO] Change the Default Color Scheme in Office 2010

  - by Mysticgeek

  Like in Office 2007 the default color scheme for 2010 is blue. If you are not a fan of it, here we show you how to change it to silver or black. In this example we are using Microsoft Word, but it works the same way in Excel, Outlook, and PowerPoint as well. Once you change the color scheme in one Office application, it will change it for all of the other apps in the suite. Change Color Scheme To change the color scheme click on the File tab to access Backstage View and click on Options. In Word Options the General section should open by default…use the dropdown menu next to Color Scheme to change it to Silver, Blue, or Black then click OK. Here is what Black looks like…who knows why Microsoft decided to leave the blue around the edges. This is the default Blue color scheme… And finally we take a look at the Silver color scheme in Excel… That is all there is to it! It would be nice if they would incorporate other color schemes to Office 2010, as some of you may not be happy with only three choices. If you’re using Office 2007 check out our article on how to change the color scheme in it. Also, The Geek has a cool article on how to set the Color Scheme of Office 2007 with a quick registry hack. Similar Articles Productive Geek Tips Set the Office 2007 Color Scheme With a Quick Registry HackChange The Default Color Scheme In Office 2007Maximize Space by "Auto-Hiding" the Ribbon in Office 2007How To Personalize the Windows Command PromptOrganize & Group Your Tabs in Firefox the Easy Way TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 2010 World Cup Schedule Boot Snooze – Reboot and then Standby or Hibernate Customize Everything Related to Dates, Times, Currency and Measurement in Windows 7 Google Earth replacement Icon (Icons we like) Build Great Charts in Excel with Chart Advisor tinysong gives a shortened URL for you to post on Twitter (or anywhere)

  Read the article

• In PLT scheme, can I export functions after another function has been called?

  - by Jason Baker

  I'm trying to create a binding to libpython using scheme's FFI. To do this, I have to get the location of python, create the ffi-lib, and then create functions from it. So for instance I could do this: (module pyscheme scheme (require foreign) (unsafe!) (define (link-python [lib "/usr/lib/libpython2.6.so"]) (ffi-lib lib)) This is all well and good, but I can't think of a way to export functions. For instance, I could do something like this: (define Py_Initialize (get-ffi-obj "Py_Initialize" libpython (_fun -> _void))) ...but then I'd have to store a reference to libpython (created by link-python) globally somehow. Is there any way to export these functions once link-python is called? In other words, I'd like someone using the module to be able to do this: (require pyscheme) (link-python) (Py_Initialize) ...or this: (require pyscheme) (link-python "/weird/location/for/libpython.so") (Py_Initialize) ...but have this give an error: (require pyscheme) (Py_Initialize) How can I do this?

  Read the article

• Loading sound in XNA without the Content Pipeline

  - by David Gouveia

  I'm working on a "Game Maker"-type of application for Windows where the user imports his own assets to be used in the game. I need to be able to load this content at runtime on the engine side. However I don't want the user to have to install anything more than the XNA runtime, so calling the content pipeline at runtime is out. For images I'm doing fine using Texture2D.FromStream. I've also noticed that XNA 4.0 added a FromStream method to the SoundEffect class but it only accepts PCM wave files. I'd like to support more than wave files though, at least MP3. Any recommendations? Perhaps some C# library that would do the decoding to PCM wave format.

  Read the article

• asus n550jv audio problem: no sound from notebook' speakers

  - by skywalker

  Ubuntu 13.10. The problem is: the internal speakers don't work. I have no problem when I'm using the headphones. There is no hardware issue since in windows 8 everything works perfectly(external subwoofer included). I'm trying to modify /etc/modprobe.d/alsa-base.conf but I can't find the correct model to put into: options snd-hda-intel model= The file HD-Audio-Models.txt doesn't contain the model for ALC668. Some info: :~sudo aplay -l **** List of PLAYBACK Hardware Devices **** card 0: MID [HDA Intel MID], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: MID [HDA Intel MID], device 7: HDMI 1 [HDMI 1] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: MID [HDA Intel MID], device 8: HDMI 2 [HDMI 2] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: PCH [HDA Intel PCH], device 0: ALC668 Analog [ALC668 Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 :~$ sudo lspci -v | grep -A7 -i "audio" 00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06) Subsystem: Intel Corporation Device 2010 Flags: bus master, fast devsel, latency 0, IRQ 52 Memory at f7a14000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Kernel driver in use: snd_hda_intel -- 00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 04) Subsystem: ASUSTeK Computer Inc. Device 11cd Flags: bus master, fast devsel, latency 0, IRQ 53 Memory at f7a10000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel PS info :~$ amixer -c 0 Simple mixer control 'IEC958',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] Simple mixer control 'IEC958',1 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] Simple mixer control 'IEC958',2 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] :~$ pacmd dump-volumes Welcome to PulseAudio! Use "help" for usage information. Sink 0: reference = 0: 76% 1: 76%, real = 0: 76% 1: 76%, soft = 0: 100% 1: 100%, current_hw = 0: 76% 1: 76%, save = yes Input 8: volume = 0: 100% 1: 100%, reference_ratio = 0: 100% 1: 100%, real_ratio = 0: 100% 1: 100%, soft = 0: 100% 1: 100%, volume_factor = 0: 100% 1: 100%, volume_factor_sink = 0: 100% 1: 100%, save = no Source 0: reference = 0: 100% 1: 100%, real = 0: 100% 1: 100%, soft = 0: 100% 1: 100%, current_hw = 0: 100% 1: 100%, save = no Source 1: reference = 0: 16% 1: 16%, real = 0: 16% 1: 16%, soft = 0: 100% 1: 100%, current_hw = 0: 16% 1: 16%, save = yes

  Read the article

• Which of VLC's dependencies causes sound device detection?

  - by Raphael

  I am setting up a headless music server based on the minimal Ubuntu image. After having installed the packages openssh-server,pulseaudio, libmad0,flac,liboff0,libid3tag0,libvorbis0a,ffmpeg, mpd,mpc,mpdscribble, paman,paprefs,pavumeter neither my internal soundcard nor the external DAC where detected by pulseaudio, that is pactl list did only list the dummy devices. Several reboots did not change that. The hardware devices are detected properly: ~$ lsusb | grep Texas Bus 002 Device 002: ID 08bb:2706 Texas Instruments Japan ~$ lspci | grep Audio 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02) Following a hunch, I installed vlc with all dependencies. After a reboot, both devices are detected! ~$ pactl list | grep "Sink: alsa_output" Monitor of Sink: alsa_output.pci-0000_00_1b.0.analog-stereo Monitor of Sink: alsa_output.usb-Burr-Brown_from_TI_USB_Audio_DAC-00-DAC.analog-stereo Now I would like to remove VLC again but keep the devices. The question is: which of the many dependencies of VLC enables proper device detection? And why on earth is it not a dependency of pulseaudio?

  Read the article

• XUbuntu 12.04 sound becomes distorted on ASUS-computers

  - by Slava Fomin II

  On my XUbuntu 12.04 Desktop from time to time audio becomes distorted, not the audio from some specific applications but every possible sounds are very noisy and barely recognizable. Then i go to: Applications Menu Multimedia PulseAudio Volume Control "Configuration"-tab and change Built-in Audio's Profile from my current profile to something else. After that audio becomes normal, until it breaks again and i have to repeat these steps. It's happening on two different computers: one is an ASUS-based Desktop and other is ASUS notebook. Maybe it's related to some common motherboard audio components. Motherboard is: ASUS P8P67 EVO REV 3.0 Netbook is: ASUS EEPC VX6 Any help will be much appreciated = )

  Read the article

• Bursts of white noise sound when playing videos

  - by Dave M G

  I've recently freshly reinstalled Ubuntu, and Mythbuntu, on all my computers. On one of my computers, Mythbuntu 11.10, when I play a video, when it starts, I get a burst of white noise (static) that stays on. If I stop the video and restart it, the noise goes away. Sometimes if I fast forward or manipulate the video, the noise will start. It seems to be initiated, and stopped, by starting or interacting with the video. Any ideas as to why this is happening and how I can get rid of it?

  Read the article

• 5.1 surround sound for 12.04

  - by iwhorl

  I am very new to Ubuntu and linux as I have used windows only until yesterday. I am attempting to send my audio signal to my pioneer reciever using a single digital optical cable which is plugged into my M2N Sli Deluxe motherboard. I am sending video with a Geforce 8600gt video card through HDMI. That card does not support audio through HDMI. The only thing I have got to work so far is my left channel speaker acts as a stereo left and my sub woofer is trying to act as a stereo right. I was able to achieve this through altering the alsamixer settings. Can anyone point me in the right direction on this?

  Read the article

• Physics-perfect (or somewhere near) 3d sound engine

  - by passcod

  I'm new to game programming, although I have some years of experience in console/web development. My problem is not so much that I can't find what I'm looking for, it's just that I don't have the terminology to actually perform a successful search. I am looking for a physics engine which has great focus on sounds. In fact, I do not care at all for anything else. What I mean is better explained by an example: Suppose a 1st person type game. You are facing North, and someone somewhere around you throws a flute at you (nevermind the absurdity of the situation). The flute spins while it is on its way, making sounds through its holes. There is a wind of say, 5 knots South. I imagine a physics engine will be capable of calculating the trajectory of the flute, as well as the direction it takes after it hits. What I want is for the physics engine to calculate the precise sounds it will make, from any listener's perspective. Does any such engine exists? If there are several, which one would be best for the example above?

  Read the article

• No sound for headphones

  - by Joel Lino

  I was trying some of the solutions published in this forum for the same problem, but just one in particular work for me: add the line of code in the file alsa-base.conf. This just works for a few days, now the problem is back again. Any solution to fix this problem for good? Compaq Presario CQ40 $ lspci | grep -i audio 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) 01:05.1 Audio device: ATI Technologies Inc RS780 Azalia controller

  Read the article

• Turning down the sound on a switched off user

  - by soandos

  If one switches users (i.e. user one switches off, and then another users logs in) and there is sound playing on the first user, that sound will continue to play for the second user. If the second user has admin rights, they can guess what program is causing the sound and then kill it, but that is very clumsy, and far more than what "needs" to be done. When I open the mixer, it just shows that sound is playing. How can I stop it?

  Read the article

• Sound Card Problem?

  - by Paul

  I bought a new sound card because my built in sound card did not function. When i open youtube, media player or anything that can create a sound my computer will hang up and sometimes when i start my computer it will hang when the windows xp sound will activate.. Help me pls ASAP

  Read the article

< Previous Page | 6 7 8 9 10 11 12 13 14 15 16 17  | Next Page >