Search Results

Search found 407 results on 17 pages for 'wilhelmtell of purple magenta'.

Page 10/17 | < Previous Page | 6 7 8 9 10 11 12 13 14 15 16 17  | Next Page >

• UEFI/GPT Win 7 Load Failure in Dual Boot and no GRUB2 [Ubuntu 12.04]

  - by cristian_jordache

  Configuration: MBB: ASRock X79 Extreme6 Win 7 installed on a INTEL 40GB SSD (GPT partitioned) Ubuntu 14.04 on a CORSAIR 30GB SSD (Ext4 and SWAP) I had Windows 7 installed previously in UEFI mode, using 3 partitions (GPT) and works fine if left alone. In UEFI BIOS settings I can see sometimes a "Windows Boot Manager" and other times (?) a "UEFI Intel" entry for INTEL HDD and Windows will boot properly selecting the one available at that time. I installed Ubuntu 14.04 after Win 7 w/o changing any UEFI BIOS settings and it works fine only if the BIOS is set w/ the Ubuntu partition as the first drive to boot, in AHCI mode. If both SSD drives are connected, the Win7 Intel boot drive can be chosen as first boot device but only as an "AHCI Intel drive" (No "Windows Boot Manager" nor "UEFI Intel device" options available in BIOS Boot menu) and Win7 will not load properly as long as the Ubuntu Crucial SSD is NOT PHYSICALLY DISCONNECTED. Windows will try, start booting for few seconds but will fail replacing Win7 logo and that startup animation with w/ the "old" white progress bar and then and will notify that there is a issue and prompt the user to try to Load Win 7 in Normal Mode again or try a Recovery Mode to fix it. If I let Windows INTEL HDD boot via BIOS/UEFI - Windows Boot manager selection, I may see the purple screen of Grub2 loaded for a while, but there's no selection for Ubuntu or Windows and/or then machine is not booting, showing a black screen and a small command prompt cursor blinking on top. So far the only option I see to have Ubuntu boot side by side w/ Win 7 is to reformat the Win7 SDD and set it boot in legacy BIOS mode with a MBR instead of GPT. Per my understanding this is a quite complex issue to fix (Rod Smith's answer was pretty helpful: UEFI boot on my Asus k52f) but any other suggestions are welcome. I find a bit odd that I can boot properly Windows7 SSD or an Ubuntu DVD using a DVD drive set in UEFI-BIOS in "AHCI mode" and w/ using "UEFI/Windows Boot Manager" booting option but I cannot boot a secondary SSD-HDD w/ Ubuntu having the same BIOS/UEFI Boot configuration. Looks like plugging the second SSD [the Ubuntu partition] is interfering with boot options in UEFI-BIOS.

  Read the article

• Upcoming MySQL Events in Europe

  - by Bertrand Matthelié

  @font-face { font-family: "Arial"; }@font-face { font-family: "Cambria"; }p.MsoNormal, li.MsoNormal, div.MsoNormal { margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: "Times New Roman"; }h2 { margin: 12pt 0cm 3pt; page-break-after: avoid; font-size: 14pt; font-family: "Times New Roman"; font-style: italic; }a:link, span.MsoHyperlink { color: blue; text-decoration: underline; }a:visited, span.MsoHyperlinkFollowed { color: purple; text-decoration: underline; }span.Heading2Char { font-family: Calibri; font-weight: bold; font-style: italic; }span.apple-style-span { }div.Section1 { page: Section1; } Oracle’s European MySQL team is active running many events during the upcoming couple of months. We hope to see you there - Register Now! Scale with MySQL Are you looking to scale with MySQL? On-premise or in the cloud? Leveraging SQL and NoSQL Access? Join us for a free Oracle seminar focusing on best practices for MySQL performance and scalability. April 25: London May 22: Berlin MySQL Enterprise Edition Workshop In this hands-on seminar we will present the MySQL Enterprise Edition management tools under guidance of Oracle’s MySQL experts providing hints and tips. May 8: Düsseldorf High Availability Solutions for MySQL Web-based and business critical applications must typically be available 24/7. In addition to being very costly due to lost revenue opportunities, downtime can be extremely detrimental to customer loyalty, and present regulatory issues if data is compromised. Join us for this seminar to better understand how to achieve high availability with MySQL. May 10: Helsinki May 23: Munich May 24: Baden-Dättwil (near Zürich)

  Read the article

• Oracle TechCast Live: "MySQL 5.5 Does Windows"

  - by bertrand.matthelie(at)oracle.com

  @font-face { font-family: "Arial"; }@font-face { font-family: "Cambria"; }p.MsoNormal, li.MsoNormal, div.MsoNormal { margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: "Times New Roman"; }a:link, span.MsoHyperlink { color: blue; text-decoration: underline; }a:visited, span.MsoHyperlinkFollowed { color: purple; text-decoration: underline; }div.Section1 { page: Section1; } Interested in MySQL on Windows? Join our next Oracle TechCast Live on Tuesday January 11th at 10.00 am PT! MySQL Product Manager Mike Frank will then tell you all about the major MySQL 5.5 performance gains on Windows.   In case you're not familiar with the Oracle TechCast Live events, they're akin to online "fireside chats" with experts about new tools, technologies and trends in application development. They also include live Q&A sessions, and you can ask questions via Twitter & Facebook. You can check out a few archived sessions here.   Get ready to ask your questions to Mike!   We hope many of you will join.

  Read the article

• OurSQL: The MySQL Database Community Podcast

  - by bertrand.matthelie(at)oracle.com

  @font-face { font-family: "Arial"; }@font-face { font-family: "Cambria"; }p.MsoNormal, li.MsoNormal, div.MsoNormal { margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: "Times New Roman"; }a:link, span.MsoHyperlink { color: blue; text-decoration: underline; }a:visited, span.MsoHyperlinkFollowed { color: purple; text-decoration: underline; }div.Section1 { page: Section1; } For those of you not aware of it, Sheeri K. Cabral and Sarah Novotny are doing a great job running the "OurSQL" Podcast. A great and convenient way to learn more about various MySQL topics. @font-face { font-family: "Arial"; }@font-face { font-family: "Cambria"; }p.MsoNormal, li.MsoNormal, div.MsoNormal { margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: "Times New Roman"; }div.Section1 { page: Section1; } Episode 33 is about "Looking through the Lenz"...that is, Lenz Grimmer, MySQL Community Manager at Oracle and long time MySQLer.   Lenz talks about snapshot backups in general, MySQL backups with snapshots, and mylvmbackup, a script he wrote and maintains to easily take consistent MySQL snapshot backups. Check it out!   Keep up the good work, Sheeri and Sarah!

  Read the article

• Dell Latitude will not boot after fresh Ubuntu 12.10 installation. Black screen

  - by James

  I have an old dell latitude d610 that I've just installed ubuntu 12.10 onto, and now unfortunately it will not complete booting up. The screen flashes purple but then fades out and dies. I'm fairly sure there is an issue with graphics drivers, as I had to turn on "nomodeset" in the options when installing off a DVD to see the installer, but I'm very new to linux and don't know terribly much at all apart from what I've read on the net. I have been able to hold down shift and bring up GRUB, and entered into recovery mode, and when I enter into the low graphics mode, the xserver log file says it can detect a screen but found none with a useable configuration, then goes on to say a fatal server error has occurred and no screen have been found at all, telling me to check a log file at "/var/log/xorg.0.log" I have no idea how to check this specific log file! Attempting to actually go further than this in low graphics mode and restart the display simply artefacts the screen. It is all very strange and annoying because I did once by random have the machine boot completely for no apparent reason, but upon restarting the issue reoccurred.

  Read the article

• Grub options are not visible on booting on Samsung ATIV Book 9 Lite running Ubuntu 14.04

  - by mjwittering

  I've managed to install Ubuntu 14.04 on my new Samsung ATIV Book 9 Lite ultrabook. After updating some configuratiosn in the UEFI installation was very easy. The only questions and issue I believe I'm still experience is when booting. I believe when the laptop would be displaying the grub boot options I see the following. There is a black screen with a purple border of 10px around the screen. I'd like to know how I can update my system so that I see the grub boot manager. I've run these commands: sudo cat /etc/default/grub # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" GRUB_CMDLINE_LINUX="" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" The command was not possible, sudo efibootmgr.

  Read the article

• MySQL Connect Call for Papers Open Now, until May 6

  - by Bertrand Matthelié

  @font-face { font-family: "Arial"; }@font-face { font-family: "Cambria"; }p.MsoNormal, li.MsoNormal, div.MsoNormal { margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: "Times New Roman"; }a:link, span.MsoHyperlink { color: blue; text-decoration: underline; }a:visited, span.MsoHyperlinkFollowed { color: purple; text-decoration: underline; }div.Section1 { page: Section1; } MySQL Connect will take place in San Francisco September 29 and 30; you can read the Press Release here. The call for papers is open until May 6, submit your sessions now! This is your chance to present your real-world experience and share your expertise and best practices with the MySQL community. The conference includes six tracks: Performance and Scalability, High Availability, Cloud Computing, Architecture and Design, Database Administration, and Application Development. You can submit conference sessions as well as BOF (Birds-of-a-Feather) sessions. We look forward to hearing from you! Interested in sponsorship and exhibit opportunities? You will find more information here. Registration for MySQL Connect also opened today. Register now to take advantage of the Early Bird discount! MySQL Connect will be jam-packed with technical sessions, hands-on labs and Birds of a Feather (BOF) sessions delivered by MySQL community members, users, customers and MySQL engineers from Oracle. The event is a unique opportunity to learn about the latest MySQL features, discuss product roadmaps, and connect directly with the engineers behind the latest MySQL code.

  Read the article

• MySQL 5.5 Available on Oracle Linux 6 and RHEL 6

  - by Bertrand Matthelié

  @font-face { font-family: "Arial"; }@font-face { font-family: "Calibri"; }@font-face { font-family: "Cambria"; }@font-face { font-family: "MS Minngs"; }p.MsoNormal, li.MsoNormal, div.MsoNormal { margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: "Times New Roman"; }a:link, span.MsoHyperlink { color: blue; text-decoration: underline; }a:visited, span.MsoHyperlinkFollowed { color: purple; text-decoration: underline; }div.Section1 { page: Section1; } Following the availability of MySQL 5.5 on Oracle Linux 6 with the Unbreakable Enterprise Kernel, MySQL 5.5 is now also available on Red Hat Enterprise Linux 6 (RHEL 6) and Oracle Linux 6 with the Red Hat compatible kernel. MySQL users can download MySQL 5.5 Community Edition binaries for Oracle Linux and Red Hat Linux 6 here. MySQL customers can rely on Oracle Premier Support for MySQL when using the MySQL database on either Oracle Linux or Red Hat Enterprise Linux 6. In addition to offering direct Linux support to customers running RHEL6, Oracle Linux 6, or a combination of both, Oracle also provides Oracle Linux 6 binaries, update and erratas for free via http://public-yum.oracle.com.

  Read the article

• ubuntu 12.10 installation failure

  - by Eidelmaim

  Here i am asking this question again because someone deemed it a duplicate to another topic which i over looked and NOTHING AT ALL in that topic pertained to my problem. If your going to close a topic believing it is a duplicate at least do somke reasearch into WHY you think its a duplicate and provide a like to a better source. How do i get past this installation username and password issue? I downloaded ubuntu 12.10 directly from Ubuntu.com and created a bootable USB with linuxlive. after loading the boot drive and ubuntu begins, it goes directly from the purple ubuntu startup screen directly to a black DOS like prompt asking for a ubuntu login. this is COMPLETLY before any installation -begins. i need some help with this. FYI : this is what it is saying after it goes to the login area in the DOS (Full black screen) like screen. Ubuntu 12.10 ubuntu tty1 ubuntu login: now i will provide a few images of the problem i am having. and because i DONT HAVE ANY OS on the computer BECAUSE ubuntu WONT go PAST this... i have to snap these pictuires with a cell phone and upload on another PC. these links are in chronological order from time of pressing power button to time i am presented with log in screen : image 1 image 2 can only post 2 links in messages... will post additional links in comments So, again... how do i get past this ? this is entireley before ubuntu is installed on my system. my PC specs... Homebuilt computer: Motherboard is a Asus Sabertooth x58 with a intel core i7 processor. Mushkin memory @ 12gbs. 4ea. Seagate 150gb hard drives. nvidia GTX 260 graphics card. i initially attempted to install to raid 5. failed. i broke down the raid and attempted to install to a single drive with all other drives disconnected from the PC. again, thanks in advanced for any assistance.

  Read the article

• MySQL HA Events in the UK, Germany & France

  - by Bertrand Matthelié

  @font-face { font-family: "Arial"; }@font-face { font-family: "Times"; }@font-face { font-family: "Cambria"; }p.MsoNormal, li.MsoNormal, div.MsoNormal { margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: "Times New Roman"; }a:link, span.MsoHyperlink { color: blue; text-decoration: underline; }a:visited, span.MsoHyperlinkFollowed { color: purple; text-decoration: underline; }p { margin: 0cm 0cm 0.0001pt; font-size: 10pt; font-family: "Times New Roman"; }div.Section1 { page: Section1; } Oracle is running MySQL High Availability breakfast seminars in London, Düsseldorf and Paris. During these free seminars, we will review the various options and technologies at your disposal to implement highly available & highly scalable MySQL infrastructures, as well as best practices in terms of architectures. The packed agenda will include High Availability features in MySQL 5.5, MySQL Replication, MySQL Cluster, the newly released Oracle VM Template for MySQL Enterprise Edition as well as what's new in MySQL 5.6 and MySQL Cluster 7.2, including NoSQL access methods to MySQL. There are a few places left for the seminar in London taking place tomorrow, June 29th, Register Now! Learn more and register for the event in Düsseldorf, July 13th. Learn more and register for the event in Paris, September 7th. We hope to see you there!

  Read the article

• Desktop forgets theme?

  - by Marcelo Cantos

  I am running Ubuntu in VirtualBox (on a Windows 7 host). Several times now, the top-level menu bar, the task bar — and seemingly every system dialog — have forgotten the out-of-the-box "Ambiance" theme they conform to when I first installed the system. Window captions still preserve the theme, but pretty much nothing else does. I have searched high and low on Google for assistance with this problem. Everything I've found suggests either running some gconf reset or deleting .gconf* .gnome* and other similar directories. I have followed all this advice and nothing works. I still get a boring Windows-95-style gray 3D look and feel. On previous occasions, after much messing around I've given up and rebooted the VM instance, and been pleasantly suprised to see the original "Ambience" theme restored throughout the UI, but invariably it disappears again some time later, usually after a reboot, so I can never figure out what I did that broke it. Here's a sample from Ubuntu's site of what I want it to look like. And here's a screenshot of my system as it currently looks. Also note that my GNOME Terminals normally have a nice purple semi-translucent look, and as can be seen from the screenshot, they are now just a solid matte white. This last time (just yesterday), trying numerous combinations all the usual tricks and rebooting several times hasn't fixed it, so here I am on SU wondering: How do I recover the out-of-the-box theme for my Gnome/Ubuntu desktop, noting that blowing away all config files — as suggested in many places online — fails to achieve this? It might help to know that it seems to fail either after I resize the VM instance, forcing the Ubuntu desktop to resize itself, or after I play around with Compiz settings. I haven't been able to figure out which of these it is, and it could be neither. Given the amount of pain I have had to go through to get things back to normal (and given that I am at a loss as to how to do so), it has proven difficult to definitively isolate the cause.

  Read the article

• Can not mount /dev/loop0 (/cdrom/casper/filesystem.squashfs)

  - by simpleton

  I downloaded 12.04.1 and md5 sum checked them and everything is good. Made a live usb and booted up... Just gets to where its about to start with the purple ubuntu loading screen then it goes back to text and gives this message: BusyBox v1.18.5 (Ubuntu 1:1.18.5-1ubuntu4) built-in shell (ash) Enter 'help' for a list of built-in commands. (initramfs) mount: mounting /dev/loop0 on ///filesystem.squashfs failed: Input/output error Can not mount /dev/loop0 (/cdrom/casper/filesystem.squashfs) on //filesystem.squashfs This happens in the live option, or persistent even the file checking one doesn't work Also I've tried a few different F6 options to no avail. I used 'LiLi USB creator' and 'unetbootin' and also 'Universal USB Installer,' all with the same results. I've also tried using a VM and it showed the same. That is when I figured I had a corrupt .iso so I downloaded it again checked the MD5: e235b63c02644e219b7bf3668f479c9e. Only I'm having the same problem. I'm just about ready to give up on 12.04.1 and just go back to 10.04 utill the next LTS comes out. I've got a dell mini 10 btw. Thanks for your time.

  Read the article

• Presario r3000 hangs on boot to Ubuntu 12.04

  - by Chris

  I have a Compaq Presario r3000 laptop with Ubuntu 12.04 32 bit. 1.2GB RAM, with a nvidia Gforce 420 Go with 32MB RAM. It hangs on bootup about 3 out of 4 times at either the purple screen, or with a cursor in the upper left corner. Booting without a splash screen shows it hanging after attempting to initialize the floppy controller. Unity has never booted to 3D either, only 2D, with the additional drivers always failing to install. I searched all over this board and found similar issues, and tried everything there. Extensive vid driver install and uninstalls. Network issues that I've since resolved. I even found a very similar topic with a fix that didn't work. I'll probably try a clean install today (given how much I've probably messed up), and I would really appreciate any ideas. I'm fairly new to Ubuntu, so if you would like to see any error logs or configs, please walk me through exactly how to get and post them here. Thanks.

  Read the article

• Problem Installing Ubuntu 12.04 - [Errno 5]

  - by Rob Barker

  I'm trying to intall Ubuntu 12.04 to my brand new eBay purchased hard drive. Only got the drive today and already it's causing me problems. The seller is a proper proffesional company with 99.9% positive feedback, so it seems unlikely they would have sold me something rubbish. My old hard drive packed up last Tuesday and so i bought a new one to replace it. Because this was an entirely new drive i decided to install Ubuntu as there was no current operating system. My computer is an eMachines EM250 netbook. There's no disc drive so i am installing from a USB stick. The new operating system loads beautifully, and the desktop appears just as it should. When i click install i am taken to the installer which copies the files to about 35% and then displays this: [Errno 5] Input/output error This is often due to a faulty CD/DVD disk or drive, or a faulty hard disk. It may help to clean the CD/DVD, to burn the CD/DVD at a lower speed, to clean the CD/DVD drive lens (cleaning kits are often available from electronics suppliers), to check whether the hard disk is old and in need of replacement, or to move the system to a cooler environment. The hard drive can be heard constantly crackling. When i booted Ubuntu 12.04 from my old faulty hard drive as a test, i didn't even make it past the purple Ubuntu screen, so it can't be that bad. Any ideas? Message to the moderators. Please do not close this thread. I'm well aware there may be other threads on this, but i don't want it closing as the others do not provide the answer i am looking for. Thank you.

  Read the article

• How do I start Ubuntu without X server?

  - by Kaare Mikkelsen

  So, I'm trying to install the official nVidia drivers for my fancy graphics card, and they advice disabling the X server before installing, as well as making sure that I can boot without the X server, so as not to wreck anything. However, I seem to be doing something wrong. As I understand it, this should be as simple as changing the runlevel from 2 to 1? (I am aware that all this may simply be me not understanding runlevels) If that is correct, a quick test should be simply typing "sudo init 1" or "sudo telinit 1" in a terminal? Doing that makes the system attempt to shutdown, only it stops at the purple screen with the ubuntu logo and 5 white dots underneath. I haven't observed it get anywhere from there, I always end up holding down the power button. "sudo telinit 3" has not visible effect. Alternatively, I should be able to get there using the recovery mode, activated through the grub menu? I have very little success with that. After picking recovery mode, I am faced with a set of options about how to proceed. Both choosing the one with "network enabled" and "text only", I get a dialog explaining that this will mount my / file system in read/write mode, and whether this is what I want. I choose yes, and it seems to report that my drive is fine (there's a single line of text detailing the state of the partition). And then it stops. I haven't tried letting it sit for more than a few minutes, but presumably this process should be comparable in duration to a regular boot? I am not particularly fond of messing with any .conf-files until I am certain that I can handle things with training wheels on. So, I guess there are two questions: the one in the title, and "how do I start a text-only session without changing defaults?" Thanks in advance :)

  Read the article

• Fresh install of Ubuntu 12.10 won't boot on Asus X101CH Eee PC

  - by Najdmie

  I did a fresh install of Ubuntu 12.10 in my Asus X101CH Eee PC, using a live usb which I made using startup disk creator, replacing Ubuntu 12.04. The installation ran smoothly, but when I boot, it goes to a purple screen for a second, then a lot of text like the following shows up in sequence: Starting crash report submission daemon [OK] Starting CPU interrupts balancing daemon [OK] Stopping save kernel messages [OK] _ And the cursor just keeps blinking for hours. I can't log in. Pressing Alt + F2 did not bring me to console mode. I thought it might be a partition problem so I formatted the whole disk, by creating a new partition table using gparted in Ubuntu 12.04 live USB. I noticed that I can't try Ubuntu using 12.10 live USB either; it just went to a blank screen when I hit the 'try ubuntu' button. But the same problem arose. I even changed the pen drive for the live USB a couple of times. I happened to know that the Intel Atom N2600 Cedar Trail CPU in my computer is not well supported in Linux, I managed to install its drivers in Ubuntu 12.04, although the computer went blank during the installation.

  Read the article

• MySQL Makes The Cover of Oracle Magazine!

  - by bertrand.matthelie(at)oracle.com

  @font-face { font-family: "Arial"; }@font-face { font-family: "Times"; }@font-face { font-family: "Cambria"; }p.MsoNormal, li.MsoNormal, div.MsoNormal { margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: "Times New Roman"; }a:link, span.MsoHyperlink { color: blue; text-decoration: underline; }a:visited, span.MsoHyperlinkFollowed { color: purple; text-decoration: underline; }div.Section1 { page: Section1; } In case you haven't seen it yet, MySQL made the cover of the January/February Edition of Oracle Magazine!   Published 6 times per year and distributed to over half a million of IT managers, DBAs and developers, Oracle Magazine contains technology-strategy articles, sample code, tips, Oracle & partner news, and more.   @font-face { font-family: "Arial"; }@font-face { font-family: "Cambria"; }p.MsoNormal, li.MsoNormal, div.MsoNormal { margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: "Times New Roman"; }div.Section1 { page: Section1; } If you're thinking that this is yet another indicator that Oracle is very serious about MySQL, you're absolutely right!   I encourage you to read David Kelly's "Open For Business" article posted online here.   "First released in 1995 and purchased by Sun in 2008, MySQL has quickly graduated from the realm of hobbyists to the world of business, becoming the leading open source database for many Web applications and an integral part of the LAMP (Linux, Apache, MySQL, PHP) Web application stack. Almost a year after Oracle's acquisition of Sun, MySQL plays an even bigger role in enterprises of all sizes worldwide." ......   Enjoy the article!

  Read the article

• Problems with Ubuntu and AMD A10-4655M APU

  - by Robert Hanks

  I have a new HP Sleekbook 6z with AMD A10-4655M APU. I tried installing Ubuntu with wubi--the first attempt ended up with a 'AMD unsupported hardware' watermark that I wasn't able to remove (the appeared when I tried to update the drivers as Ubuntu suggested) On the second attempted install Ubuntu installed (I stayed away from the suggested drivers) but the performance was extremely poor----as in Windows Vista poor. I am not sure what the solution is--if I need to wait until there is a kernel update with Ubuntu or if there are other solutions--I realise this is a new APU for the market. I would love to have Ubuntu 12.04 up and running--Windows 7 does very well with this new processor so Ubuntu should, well, be lightening speed. The trial on the Sleekbook with Ubuntu 12.10 Alpha 2 release was a complete failure. I created a bootable USB. By using either the 'Try Ubuntu' or 'Install Ubuntu' options resulted in the usual purple Ubuntu splash screen, followed by nothing...as in a black screen without any hint of life. Interestingly one can hear the Ubuntu intro sound. In case you are wondering, this same USB was trialed subsequently on another computer with and Intel Atom Processor. Worked flawlessly. Lastly the second trial on the Sleekbook resulted in the same results as the first paragraph. Perhaps 12.10 Beta will overcome this issue, or the finalised 12.10 release in October. I don't have the expertise to know what the cause of the behaviour is-the issue could be something else entirely. Sadly, the Windows 7 performance is very good with this processor-very similar and in some instances better to the 2nd generation Intel i5 based computer I use at my workplace. Whatever the cause is for the performance with Ubuntu 12.04 or 12.10 Alpha 2, the situation doesn't bode well for Ubuntu. Ubuntu aside, the HP Sleekbook is a good performer for the price. I am certain once the Ubuntu issue is worked on and solutions arise, the Ubuntu performance will probably be better than ever.

  Read the article

• Problems with Intel Video Resolution on Acer Laptop Wide Display

  - by ricstr

  I have an ACER Aspire 5332 laptop which I have just installed Ubuntu 12.04 x64, which is causing some issues with the video display on boot and video resolution. First and foremost, it will only boot past the purple screen if GRUB has been edited to replace 'quick splash' with 'nomodeset'. Secondly, once it has booted with the the 'nomodeset' option, it does not allow me to change the resolution higher or lower from 1024 x 786. Is it OK to use the 'nomodeset' for normal use? Will this compromise performance of other devices? The video card is an on-board one, integrated within the Intel GL40 chip-set. The display is a wide-screen LCD, and under Windows could operate under various resolutions. Ideally I would like it to operate on a resolution to fit the wide-screen display as it a bit stretched out at the moment, and less desktop space as I am used to. I believe the optimal resolution is 1366 x 768. Below is some information from the terminal which may be useful. ricstr@Aspire-5332:~$ lspci | grep -i VGA 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 09) ricstr@Aspire-5332:~$ xrandr xrandr: Failed to get size of gamma for output default Screen 0: minimum 1024 x 768, current 1024 x 768, maximum 1024 x 768 default connected 1024x768+0+0 0mm x 0mm 1024x768 0.0*

  Read the article

• IE6 rendering bug. Some parsed <li> elements are losing their closing tags.

  - by Jeff Fohl

  I have been working with IE6 for many years [sob], but have never seen this particular bug before, and I can't seem to find a reference to it on the Web. The problem appears to be with how IE6 is parsing the HTML of a nested list. Even though the markup is correct, IE6 somehow munges the code when it is parsed, and drops the closing tags of some of the <li> elements. For example, take the following code: <!DOCTYPE html> <head> <title>My Page</title> </head> <body> <div> <ul> <li><a href=''>Child A</a> <div> <ul> <li><a href=''>Grandchild A</a></li> </ul> </div> </li> <li><a href=''>The Child B Which Is Not A</a> <div> <ul> <li><a href=''>Grandchild B</a></li> <li><a href=''>Grandchild C</a></li> </ul> </div> </li> <li><a href=''>Deep Purple</a></li> <li><a href=''>Led Zeppelin</a></li> </ul> </div> </body> </html> Now take a look at how IE6 renders this code, after it has run it through the IE6 rendering engine: <HTML> <HEAD> <TITLE>My Page</TITLE></HEAD> <BODY> <DIV> <UL> <LI><A href="">Child A</A> <DIV> <UL> <LI><A href="">Grandchild A</A> </LI> </UL> </DIV> <LI><A href="">The Child B Which Is Not A</A> <DIV> <UL> <LI><A href="">Grandchild B</A> <LI><A href="">Grandchild C</A> </LI> </UL> </DIV> <LI><A href="">Deep Purple</A> <LI><A href="">Led Zeppelin</A> </LI> </UL> </DIV> </BODY> </HTML> Note how on some of the <li> elements there are no longer any closing tags, even though it existed in the source HTML. Does anyone have any idea what could be triggering this bug, and if it is possible to avoid it? It seems to be the source of some visual display problems in IE6. Many thanks for any advice.

  Read the article

• Java Applet Tower Defence Game needs tweeking

  - by Ephiras

  Hello :) i have made a tower defence Game for my computer science class as one of my major projects, but have encountered some rather fatal roadblocks. here they are creating a menu screen (class Menu) that can set the total number of enimies, the max number of towers, starting money and the map. i tried creating a constructor in my Main class that sets all the values to whatever the Menu class passes in. I want the Menu screen to close after a difficulty has been selected and the main class to begin. Another problem i would really like some help with is instead of having to write entire arrays i would like to create a small segment of code that runs through an entire picture and sets up an array based on that pixels color.this way i can have multiple levels just dragged into a level folder and have the program read through them. users can even create their own. so a 1 if its yellow, a two if blue and a 3 if purple, then everything else = 0; you can download all the classes and code uif you'd like here sorry about having to redirect you but i wasn't sure how to efficently add a code spoiler. help is greatly appreciated

  Read the article

• Booting Error while using 12.04 booting from GRUB

  - by Paul Z.

  my name is Paul. I have encountered an issue relating to GRUB booting and the booting process in general. I have been running Ubuntu 12.04 LTS on my machine for quite a while. Before that, i had (before) 10.04, 11.04, 11.10, etc. I have been running Ubuntu, in general, but more specifically 12.04 for a long time with little to no problems. The problem: Earlier today, i was using my machine and then decided to take a little break. I shut down my machine (laptop, in case anyone was wondering) and left. Later, I came back ready to start it up and continue. I started it up and it took me to the Toshiba screen (like normal) then to the GRUB screen. I guessed that nothing was truly wrong, and chose the first option (something around the lines of: Ubuntu, with linux 3.22.0-35-generic). I waited for a bit and it still displayed the same purple screen. I restarted it and now chose the option like the first but with recovery at the end. Same result. Later, I waited longer and found that my computer came up with a bunch of lines of script. I waited longer but nothing new happened. What are your suggestions as to fix this problem? I will let my computer run overnight with the recovery setting and will let you know what the result is. Until then, please help. Thank you, your time and effort is greatly appreciated!

  Read the article

• ugg slippers makes you feel balmy and comfy

  - by skhtyu skhtyu

  You accept to apperceive admitting that while cheap ugg boots is accepted for winter wear, it can in achievement be beat in every season. These uggs for kids usually are an Aussie acceptation complete from merino affidavit and are aswell asperous calm with fashionable. There are hip calm with adequate jackets, vests, sweatshirts, added more. For a contemporary ensemble that makes you feel balmy and comfy, try cutting your boots with some leggings or a sweater dress with a capote or bandage befuddled on. If you don't own a Bout of pink uggs even, now may be the adequate time to buy yourself one. They arise in checkered by azure to orange, to amber as able-bodied as the always-reliable black. as able-bodied as in the break you admiration to go for any decidedly added indigenous arise accession them up nation achievement architecture arise as noticed about the catwalks of purple uggs and Badgley Mischka. With this, you could already see which website is alms the ugg outlet online that you accept been absent at a amount that you can afford. The advanced throated ones are simple to blooper in and out which makes them admired a allotment of all women. uggs for sale were aboriginal fabricated in Australia. Aswell there are clear abode characterization rolls in which characterization fonts, sizes and chantry colours can be customized.

  Read the article

• 12.04 update crash, now cannot boot

  - by EdW

  Boot now freezes the system at the "Ubuntu purple screen" with the 5 dots under it. I cannot even CTRL-ALT-F1 to get to an alternate console. Have to push reset button on computer to reboot. After the 12.04 update crash, the system would boot, but I had no icons and no launch bar and errors about missing dependencies. CTRL-ALT-F1 and ran apt-get -f install and it appeared to get the missing packages. I followed with a apt-get update; apt-get upgrade. It appeared to install all of the remaining 12.04 update packages. Rebooted to same blank screen - no icons, but got a compiz error. In console I tried "unity --reset" rebooted ... Nothing ... It's dead in the water. Tried to boot into Recovery Mode - black screen - I cannot even CTRL-ALT-Del - have to push reboot button. Fortunately, I have Mint on another partition and I can access the broken 12.04 partition. Ideas? I can back up all of my folders using Mint, but I would hate to have to do a new install.

  Read the article

• Dual monitor setup can cause boot problem?

  - by kriszpontaz

  I have a two monitor setup, one 22" (1680x1050 res., 16:10) and another 19" (1280x1024 res. 5:4). I've installed ubuntu 11.10 beta2 x86, and the installation worked fine, the system boot was successful. I've upgraded ubuntu from the main server, and after restart, booting with the kernel 3.0.0-13, my system hangs up with a purple screen, and than nothing happens (the system boots successful with the kernel image 3.0.0-8). Nvidia current drivers not installed, but if i install it, the situation is the same. I have an Nvidia 9600GT installed. I tried to boot with one screen attached, I've tried each port, but no luck at all. With kernel image 3.0.0-8 the system successfully boots with each display attached, but the farther kernels (3.0.0-11; 3.0.0-12; ect.) all freezes, even one display, or multiple attached. I have two systems with ubuntu installed, and the other (with Ati HD 2400XT, latest closed drivers) don't have any issues like this, I wrote about. Update: The problem solved by reinstalling the operatin system, without automatically installing updates during install, with only one monitor attached. After completing installation, and clean reboot, i've installed closed nVidia drivers. After all, i found it's safe to connect another monitor to the system, it's not causing any problems. Probably the situation stays like this.

  Read the article

< Previous Page | 6 7 8 9 10 11 12 13 14 15 16 17  | Next Page >