Search Results

Search found 9602 results on 385 pages for 'disk cleanup'.

Page 100/385 | < Previous Page | 96 97 98 99 100 101 102 103 104 105 106 107  | Next Page >

• Order in which passphrase is asked for encrypted volumes

  - by Lars Kotthoff

  I have installed 12.10 on a machine with two disks. The root partition is on one disk, the swap partition on the other. Both disks are encrypted and I have added the corresponding entries to /etc/crypttab. During boot, it asks for the passphrase for the disk with the root filesystem. Then it continues booting and gets to the login screen before I get a chance to enter the passphrase for the other disk. After logging in, I verified that it was actually waiting for me to enter the passphrase for that second partition (askpass process is running). But at that point, I have no way of entering the passphrase anymore. The manpage for crypttab suggests that the order in which the volumes are specified matters, so I changed it to have the swap disk first. I updated the initramfs and grub afterwards, but it didn't make any difference. How can I specify the order in which the encrypted partitions are unlocked? I'm looking for a solution that either asks for the swap passphrase first or tells the system to wait until all encrypted partitions are unlocked before displaying the login screen.

  Read the article

• How can I set up FakeRAID/SoftRAID using mdadm without losing data?

  - by Danatela

  There is RAID0 of 2 drives connected through Silicon Image 3132 SATA SoftRAID controller. Under Windows it was partitioned as one dynamic GPT-disk having 4 TB NTFS volume. There is a lot of music and movies on the drive. I'm trying to get him to be seen under Ubuntu as a single disk, not as 2 by 2 terabytes. I tried to read it through dmraid, had no success, it is not displayed in /dev/mapper. Also tried to configure the kernel, but did not find anything suspicious, the driver for my controller was on. There is also a driver from the manufacturer, but it is only available for RHEL and SLES. Here it's reported that SoftRAID is supported by the kernel, but apparently not completely. If I thrust drives in the AMD controller, built into the motherboard, the drive is seen as a single, but the data is lost. I know about mdadm that it is able to ditch all the information on the disks. So, is it possible to somehow create an array without actually recording information on used drives and to make the system correctly identify sections on it later? Information about the array: /dev/sdf - Disk 0 /dev/sdg - Disk 1 Array type: Stripe Block Size: 64KB Also, a device /dev/md1 is created using command mknod /dev/md1 b 9 1

  Read the article

• One of the partion on a usb harddisk cannot automount

  - by holmescn

  It is a very strange problem. My usb harddisk has four partitions, one is primary, the other three are logical (contained within an extended partition). When I plug in the disk, three of the partitions are mounted automatically except one--the first logical partition in the extended partition. Initially I thought it is the problem of system (at that time I used Mint). But after I change to Ubuntu 12.04, the problem wasn't solved. I don't want to add a rule in fstab, and I want to know what happened. The disk is fine, and the partition can be accessed in Windows and mounted manually. result of dmesg | tail: [100933.557649] usb 2-1.2: new high-speed USB device number 4 using ehci_hcd [100933.651891] scsi8 : usb-storage 2-1.2:1.0 [100934.649047] scsi 8:0:0:0: Direct-Access SAMSUNG PQ: 0 ANSI: 0 [100934.650963] sd 8:0:0:0: Attached scsi generic sg2 type 0 [100934.651342] sd 8:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [100934.651977] sd 8:0:0:0: [sdb] Write Protect is off [100934.651989] sd 8:0:0:0: [sdb] Mode Sense: 03 00 00 00 [100934.652836] sd 8:0:0:0: [sdb] No Caching mode page present [100934.652848] sd 8:0:0:0: [sdb] Assuming drive cache: write through [100934.655354] sd 8:0:0:0: [sdb] No Caching mode page present [100934.655367] sd 8:0:0:0: [sdb] Assuming drive cache: write through [100934.734652] sdb: sdb1 sdb3 < sdb5 sdb6 sdb7 > [100934.737706] sd 8:0:0:0: [sdb] No Caching mode page present [100934.737725] sd 8:0:0:0: [sdb] Assuming drive cache: write through [100934.737731] sd 8:0:0:0: [sdb] Attached SCSI disk result of parted -l: Model: SAMSUNG (scsi) Disk /dev/sdb: 320GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 21.5GB 21.5GB primary ntfs 3 21.5GB 320GB 299GB extended lba 5 21.5GB 129GB 107GB logical ntfs 6 129GB 236GB 107GB logical ntfs 7 236GB 320GB 83.8GB logical ntfs

  Read the article

• SD Card only mounted after a reboot

  - by hattenn

  I have a Kingston 2GB MicroSD and I plug it in via an inconix MicroSD Adapter to the internal card reader of my Samsung N210 Netbook with Ubuntu 10.10, but it doesn't show up. Only if I reboot the system when the card's plugged in it shows up. Why does it need a reboot for mounting? sudo fdisk -l gives the output below. But I can only see the drive when I reboot the computer while the card's plugged. Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x9a5a7990 Device Boot Start End Blocks Id System /dev/sda1 1 1959 15728640 27 Unknown Partition 1 does not end on cylinder boundary. /dev/sda2 * 1959 1972 102400 7 HPFS/NTFS /dev/sda3 1972 18992 136718750 83 Linux /dev/sda4 18992 19458 3738625 5 Extended /dev/sda5 18992 19458 3738624 82 Linux swap / Solaris Disk /dev/sdb: 1973 MB, 1973420032 bytes 60 heads, 59 sectors/track, 1088 cylinders Units = cylinders of 3540 * 512 = 1812480 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 1089 1927100+ 6 FAT16

  Read the article

• Install on Acer Aspire 4752

  - by user216962

  I am at my wits end with this computer. I bought and Acer Aspire 4752 with a fully loaded version of Windows 7 on it. I prefer Ubuntu so I began to install 14.04 from USB. Got the error: [Errno 5] Input/output error This is often due to a faulty CD/DVD disk or drive, or a faulty hard disk. It may help to clean the CD/DVD, to burn the CD/DVD at a lower speed, to clean the CD/DVD drive lens (cleaning kits are often available from electronics suppliers), to check whether the hard disk is old and in need of replacement, or to move the system to a cooler environment. So I tried a different USB stick, same error. Tried different versions of Ubuntu, got the same error. I've used startup disk creator and Unetbootin to make start USB boot devices. I can boot with the USB drive and run Ubuntu that way. I even checked the hard drive using the tools in Ubuntu. Everything was fine, except it said the hard drive was hot. I tried a different hard drive. Got same error above. I ran a test with mem86, everything was fine. No matter what I do, using the USB gives me the Errno5 error. I then switched to using DVDs. Now I keep getting an uncompression error when installing Ubuntu 14.04 or 12.04. I can't figure out for the life of me why I get nothing but errors. Can anyone help?

  Read the article

• It could be worse....

  - by Darryl Gove

  As "guest" pointed out, in my file I/O test I didn't open the file with O_SYNC, so in fact the time was spent in OS code rather than in disk I/O. It's a straightforward change to add O_SYNC to the open() call, but it's also useful to reduce the iteration count - since the cost per write is much higher: ... #define SIZE 1024 void test_write() { starttime(); int file = open("./test.dat",O_WRONLY|O_CREAT|O_SYNC,S_IWGRP|S_IWOTH|S_IWUSR); ... Running this gave the following results: Time per iteration 0.000065606310 MB/s Time per iteration 2.709711563906 MB/s Time per iteration 0.178590114758 MB/s Yup, disk I/O is way slower than the original I/O calls. However, it's not a very fair comparison since disks get written in large blocks of data and we're deliberately sending a single byte. A fairer result would be to look at the I/O operations per second; which is about 65 - pretty much what I'd expect for this system. It's also interesting to examine at the profiles for the two cases. When the write() was trapping into the OS the profile indicated that all the time was being spent in system. When the data was being written to disk, the time got attributed to sleep. This gives us an indication how to interpret profiles from apps doing I/O. It's the sleep time that indicates disk activity.

  Read the article

• Help with dual booting Windows 8.1 Professional and Ubuntu 13.10

  - by user1292548

  I recently installed a clean version of Windows 8.1 Professional on my Lenovo Y500 (with Samsung 256GB 840 Pro SSD). I have Windows all set up and running normally. I am trying to dual boot Windows 8.1 and Ubuntu 13.10, but the installation procedure don't allow me to either "Install alongside..." or shows my SSD partitions correctly when I chose the "Something Else" option. I have created a 25GB partition of free space in the Windows disk manager, but on the installation screen on Ubuntu, it shows the whole drive as a free space. I have tried installing with a burned .ISO disk and a bootable USB, the results are the same for both. Windows Disk Management screen: http://imageshack.us/a/img855/9504/59zu.jpg The Ubuntu installation screen: http://imageshack.us/a/img62/2712/9g6i.jpg I've ran into this problem before when trying to dual boot Ubuntu and Windows 7 Professional a month ago. But I gave up and never resolved the issue. --EDIT-- I tried what Eero Aaltonen suggested, and this is my result: ubuntu@ubuntu:~$ sudo parted /dev/sda print Warning: /dev/sda contains GPT signatures, indicating that it has a GPT table. However, it does not have a valid fake msdos partition table, as it should. Perhaps it was corrupted -- possibly by a program that doesn't understand GPT partition tables. Or perhaps you deleted the GPT table, and are now using an msdos partition table. Is this a GPT partition table? Yes/No? yes Model: ATA Samsung SSD 840 (scsi) Disk /dev/sda: 256GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags ubuntu@ubuntu:~$

  Read the article

• Dual Boot menu with Ubuntu and Windows 8 not showing up

  - by user180630

  I know a lot of posts have been written, and I had read most of them when I encountered the problem. None of them solved the problem. I have successfully installed Ubuntu 12.04 on top of Windows 8. Now my PC simply boots into Windows 8. If I press 'Esc' at start of BIOS, and then F9,the GRUB shows up and Ubuntu is listed at the top of the several options to boot from. I did run Boot-Repair once I logged into Ubuntu explicitly from GRUB as mentioned above. I did all said by Stormvirux in this link but was still unsuccessful. The debug info is listed here. Something which confuses me is the message which Boot-Repair stated after it did its job. You can now reboot your computer. Please do not forget to make your BIOS boot on sda (8004MB) disk! The boot files of [The OS now in use - Ubuntu 12.04.2 LTS] are far from the start of the disk. Your BIOS may not detect them. You may want to retry after creating a /boot partition (EXT4, 200MB, start of the disk). This can be performed via tools such as gParted. Then select this partition via the [Separate /boot partition:] option of [Boot Repair]. (https://help.ubuntu.com/community/BootPartition) I don't know why it says it is far from the start of the disk as I see it first in the GRUB menu which comes up at startup. One more input, when I try to place the GRUB in sda, Boot-Repair does not progress giving me the following error: GPT detected. Please create a BIOS-Boot partition (>1MB, unformatted filesystem, bios_grub flag). This can be performed via tools such as Gparted. Then try again. Alternatively, you can retry after activating the [Separate /boot/efi partition:] option. I had to select Separate /boot/efi partition: sdb2

  Read the article

• SD Card only mounted after a reboot

  - by evothur

  Hi everyone. I have a Kingston 2GB MicroSD and I plug it in via an inconix MicroSD Adapter to the internal card reader of my Samsung N210 Netbook with Ubuntu 10.10, but it doesn't show up. Only if I reboot the system when the card's plugged in it shows up. Why does it need a reboot for mounting? sudo fdisk -l gives the output below. But I can only see the drive when I reboot the computer while the card's plugged. Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x9a5a7990 Device Boot Start End Blocks Id System /dev/sda1 1 1959 15728640 27 Unknown Partition 1 does not end on cylinder boundary. /dev/sda2 * 1959 1972 102400 7 HPFS/NTFS /dev/sda3 1972 18992 136718750 83 Linux /dev/sda4 18992 19458 3738625 5 Extended /dev/sda5 18992 19458 3738624 82 Linux swap / Solaris Disk /dev/sdb: 1973 MB, 1973420032 bytes 60 heads, 59 sectors/track, 1088 cylinders Units = cylinders of 3540 * 512 = 1812480 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 1089 1927100+ 6 FAT16

  Read the article

• ubuntu 12.04 installer does not recognize drive partitions

  - by endless forms

  I recently purchased a new HP Pavilion HPE desktop running Windows 7. I am trying to install a dual-boot system with 12.04. However, when I run the LiveCD I only get as far as the "Install" window where you can select the partitions for your drives. On the bottom where it says "device for boot loader installation" I have "/dev/sda" and cannot select any other devices. All the options to change the drives are greyed out, most likely because there are no drives in the window. I partitioned my largest drive using the tools within Windows, then booted into the CD, but nothing shows up. I then used Gparted to change the new space from unallocated to an /ext2, and still nothing shows up. The installer does not recognize anything, but when I go into an Ubuntu session and use the disk utility manager I can see the partitions I made. Anything I do has to be done outside of the installer. I have no files on this new computer, so this is the perfect time to install a parallel OS. I would like avoid completely reinstalling Windows, however. I've been over the forums many times, but all the answers I've found have not worked for me. I also tried flagging the new, empty partition as boot, but that screwed Windows up. Also, the WUBI installer hits the same point and quits. I know that the disk itself is fine because I just made another dual boot system on a Gateway PC. This makes me think something within this computer is preventing the installer from "seeing" the drives. Any help would be much appreciated! Edit in response: The main part of the partitioning window shows no partitions, everything is blank. There is no way to add partitions, and all the buttons are useless. I've tried defragging my drive multiple times, and I also used the same disk to dual-boot another PC with no problems, so it's not the disk, it's definitely the computer.

  Read the article

• My new hard drive won't automount on boot

  - by user518

  I installed a new hard drive right before installing the new Ubuntu 11.10 by reformatting, not upgrading. I was able to mount my drive, and partition it. It's a 1TB, and I was able to transfer all of my music, and videos to it. For some reason, it won't mount on boot, and I can't figure out how to manually mount it afterwards either. Here's my current /etc/fstab: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda1 during installation UUID=e0fbdf09-f9a0-4336-bac3-ba4dc6cfbcc0 / ext4 errors=remount-ro,user_xattr 0 1 # swap was on /dev/sda5 during installation UUID=adf15180-c84c-4309-bc9f-085fd7464f89 none swap sw 0 0 /dev/sdc1 /media/sdc1 ext4 defaults 0 0 The last line is what I added for my hard drive. Here's the output from sudo lshw -C disk: % sudo lshw -C disk ~ *-disk:0 description: ATA Disk product: ST3250310AS vendor: Seagate physical id: 0 bus info: scsi@2:0.0.0 logical name: /dev/sda version: 3.AD serial: 6RYBF2QE size: 232GiB (250GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=000da204 *-cdrom description: DVD-RAM writer product: DVD+-RW DH-16A6S vendor: PLDS physical id: 0.0.0 bus info: scsi@4:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/scd0 logical name: /dev/sr0 version: YD11 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc

  Read the article

• Drive reporting incorrect free space

  - by Oli

  So I swapped my shiny SATA SSD for an even shinier PCI-E SSD. I run my core OS on the SSD because it's silly-fast. I did this on my old SSD so I created a new EXT4 partition and then just dded the data across (sorry I don't know the exact command I ran anymore) and after reinstalling grub, I booted onto the PCI-E SSD. At first glance everything had worked perfectly and things were running faster than ever. But then I noticed the free disk space on the new, larger drive: it was almost exactly the same as it was on the other disk... A disk that was half its size. So it looks as if I've copied the files across incorrectly and it's copied some of the filesystem metadata along with it. Tools like du and Disk Usage Analyzer come back with the correct figures. Things that look at the partition (and not the files) seem to think the drive is 120GB I've been using this drive for a week now so it's way out of sync with the old SSD so dumping the data and starting again isn't a job that fills me with joy but two questions: Is there a way to fix my filesystem so it knows what it's really on about? fsck e2fsck and badblocks all seem to be able to scan it without finding a problem with it. If I do plug my old SSD back in, copy the data off my PCI-E on to it and then copy it back onto a fresh filesystem (eg juggle the data around), what's the best way of doing that? I obviously want to keep all the permissions and softlinks where they are.

  Read the article

• ubuntu boots only with usb

  - by klimat

  Just installed Ubuntu 11.04. But it boots only from usb. Seems like I didn't pay attention during selecting boot device. sudo fdisk -l [sudo] password for klim: Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x000177e1 Device Boot Start End Blocks Id System /dev/sda1 1 60045 482302976 83 Linux /dev/sda2 60045 60802 6080513 5 Extended Partition 2 does not start on physical sector boundary. /dev/sda5 60045 60802 6080512 82 Linux swap / Solaris Disk /dev/sdb: 4004 MB, 4004511744 bytes 124 heads, 62 sectors/track, 1017 cylinders Units = cylinders of 7688 * 512 = 3936256 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000eee1a Device Boot Start End Blocks Id System /dev/sdb1 * 1 1017 3909317 b W95 FAT32 grub updating or another "grub" operations don't work as I've tried. Can I just copy whole boot folder from usb to HD or smth like that? Any kind of help is appreciated. Apologize for my newbie skills.

  Read the article

• Can't mount my USB Drive

  - by user996056

  ~> sudo mount /dev/sdb1 /media/Disk Did not find any restart pages in $LogFile and it was not empty. The file system wasn't safely closed on Windows. Fixing. I have a USB Hard Disk and Windows can't detect it. So I tried to open it up on Ubuntu using gparted. Gparted detects the NTFS partition, so everything seems to be fine (note, though, that the total size of the files in this disk is over 1 TB). I tried to mount it using: sudo mount /dev/sdb1 /media/Disk But I got: Did not find any restart pages in $LogFile and it was not empty. The file system wasn't safely closed on Windows. Fixing. Then, the process just sits there blinking. Any ideas on how to fix it? It's taking forever ( 10 minutes), should I wait or cancel it and do something else? Thank you in advance.

  Read the article

• Mounting a new hard drive (sda1) to my existing filesystem

  - by shank22

  I tried to read some posts regarding mounting a new hard drive, but I am facing some problem. My new hard drive is sda1. The output of sudo fdisk -l is: sudo fdisk -l Disk /dev/sdb: 999.7 GB, 999653638144 bytes 255 heads, 63 sectors/track, 121534 cylinders, total 1952448512 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00016485 Device Boot Start End Blocks Id System /dev/sdb1 * 2048 1935822847 967910400 83 Linux /dev/sdb2 1935824894 1952446463 8310785 5 Extended /dev/sdb5 1935824896 1952446463 8310784 82 Linux swap / Solaris Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x78dbcdc1 Device Boot Start End Blocks Id System /dev/sda1 2048 1953521663 976759808 7 HPFS/NTFS/exFAT What should be done to add this new sda1 hard drive on booting up? What should be added in the /etc/fstab file? I have not performed any partition on the new sda1 drive. I need help on how to proceed from scratch and can't afford to take any risk. Please help!

  Read the article

• ??OSW (OSWatcher Black Box) ????

  - by Feng

     OSWatcher Black Box, ??OSW,?oracle???????????????,?????OS??????????OS??????????,??CPU/Memory/Swap/Network IO/Disk IO?????? +++ ????????OSW? OSW?????????,????????????????,???mrtg, cacti, sar, nmon, enterprise manger grid control. ????OSW?????: 1. ???????,???????2. ???????,????CPU,???????????3. ???????,????????????????????????OS? ???????OS???,??OS?????,?????????????;??????????????????????,???????. ???????,????????:?????????,??????????,????????????(root cause),?????????????????????????,OSW??????,??????: 1. ??????????OS??????????????????????????OSW??,?????????OS??,??????DB/???? 2. ??ORACLE Database Performance???,?????????????OS??????OS?????????????Swapping,???????????????,?????????,???AWR?????????latch/mutex?????? 3. ??????????????AWR??????????,top5??????????;?CPU,??,Swap, Disk IO?????????????OSW??????????,????????????????????????OSW???,??????????????? 4. ?????ORA-04030?????CJQ0, P00X, J00X?????????,???????OSW,???????????????????OS????????? 5. ????server process??hung?,??????OSW????????????????suspend???,?????????CPU/Memory? 6. ??Listener hung???,?????OSW??????????????? 7. Login Storm??:????????????,????,????ASH,AWR????????????????OSW?ps?????,??????, oracle ?server process????????? ???,OSW????????????????????OS?????????????,??????DBA???OSW??????????????OSW,????DB Performance????,????????OSW???? +++ ?????OSW??????: 1. ??????????????,???????,???????? 2. OSW???????? OSW??????????????OS???????,??ps, vmstat, netstat, mpstat, top;????????????????? ?????????CPU, Disk IO, Disk Space, Memory;???????????????,??????????????????????????,??OSW????????:?????????,CPU????90%??;???free space???????????????????????????,??OSW????????? +++ ????????UNIX/LINUX???/??OSW: 1. ???301137.1???OSW 2. ????????(/tmp??),??????????root?? $ tar xvf osw.tar 3. ?? $ nohup ./startOSWbb.sh 60 48 gzip & ????????,??OSW,????60???????,???????48?????(??????????),???????gzip?????? 4. ????? $ ./stopOSWbb.sh ?????????archive???? ????????????????????OSW???????,???????

  Read the article

• Combining MVVM Light Toolkit and Unity 2.0

  - by Alan Cordner

  This is more of a commentary than a question, though feedback would be nice. I have been tasked to create the user interface for a new project we are doing. We want to use WPF and I wanted to learn all of the modern UI design techniques available. Since I am fairly new to WPF I have been researching what is available. I think I have pretty much settled on using MVVM Light Toolkit (mainly because of its "Blendability" and the EventToCommand behavior!), but I wanted to incorporate IoC also. So, here is what I have come up with. I have modified the default ViewModelLocator class in a MVVM Light project to use a UnityContainer to handle dependency injections. Considering I didn't know what 90% of these terms meant 3 months ago, I think I'm on the right track. // Example of MVVM Light Toolkit ViewModelLocator class that implements Microsoft // Unity 2.0 Inversion of Control container to resolve ViewModel dependencies. using Microsoft.Practices.Unity; namespace MVVMLightUnityExample { public class ViewModelLocator { public static UnityContainer Container { get; set; } #region Constructors static ViewModelLocator() { if (Container == null) { Container = new UnityContainer(); // register all dependencies required by view models Container .RegisterType<IDialogService, ModalDialogService>(new ContainerControlledLifetimeManager()) .RegisterType<ILoggerService, LogFileService>(new ContainerControlledLifetimeManager()) ; } } /// <summary> /// Initializes a new instance of the ViewModelLocator class. /// </summary> public ViewModelLocator() { ////if (ViewModelBase.IsInDesignModeStatic) ////{ //// // Create design time view models ////} ////else ////{ //// // Create run time view models ////} CreateMain(); } #endregion #region MainViewModel private static MainViewModel _main; /// <summary> /// Gets the Main property. /// </summary> public static MainViewModel MainStatic { get { if (_main == null) { CreateMain(); } return _main; } } /// <summary> /// Gets the Main property. /// </summary> [System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Performance", "CA1822:MarkMembersAsStatic", Justification = "This non-static member is needed for data binding purposes.")] public MainViewModel Main { get { return MainStatic; } } /// <summary> /// Provides a deterministic way to delete the Main property. /// </summary> public static void ClearMain() { _main.Cleanup(); _main = null; } /// <summary> /// Provides a deterministic way to create the Main property. /// </summary> public static void CreateMain() { if (_main == null) { // allow Unity to resolve the view model and hold onto reference _main = Container.Resolve<MainViewModel>(); } } #endregion #region OrderViewModel // property to hold the order number (injected into OrderViewModel() constructor when resolved) public static string OrderToView { get; set; } /// <summary> /// Gets the OrderViewModel property. /// </summary> public static OrderViewModel OrderViewModelStatic { get { // allow Unity to resolve the view model // do not keep local reference to the instance resolved because we need a new instance // each time - the corresponding View is a UserControl that can be used multiple times // within a single window/view // pass current value of OrderToView parameter to constructor! return Container.Resolve<OrderViewModel>(new ParameterOverride("orderNumber", OrderToView)); } } /// <summary> /// Gets the OrderViewModel property. /// </summary> [System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Performance", "CA1822:MarkMembersAsStatic", Justification = "This non-static member is needed for data binding purposes.")] public OrderViewModel Order { get { return OrderViewModelStatic; } } #endregion /// <summary> /// Cleans up all the resources. /// </summary> public static void Cleanup() { ClearMain(); Container = null; } } } And the MainViewModel class showing dependency injection usage: using GalaSoft.MvvmLight; using Microsoft.Practices.Unity; namespace MVVMLightUnityExample { public class MainViewModel : ViewModelBase { private IDialogService _dialogs; private ILoggerService _logger; /// <summary> /// Initializes a new instance of the MainViewModel class. This default constructor calls the /// non-default constructor resolving the interfaces used by this view model. /// </summary> public MainViewModel() : this(ViewModelLocator.Container.Resolve<IDialogService>(), ViewModelLocator.Container.Resolve<ILoggerService>()) { if (IsInDesignMode) { // Code runs in Blend --> create design time data. } else { // Code runs "for real" } } /// <summary> /// Initializes a new instance of the MainViewModel class. /// Interfaces are automatically resolved by the IoC container. /// </summary> /// <param name="dialogs">Interface to dialog service</param> /// <param name="logger">Interface to logger service</param> public MainViewModel(IDialogService dialogs, ILoggerService logger) { _dialogs = dialogs; _logger = logger; if (IsInDesignMode) { // Code runs in Blend --> create design time data. _dialogs.ShowMessage("Running in design-time mode!", "Injection Constructor", DialogButton.OK, DialogImage.Information); _logger.WriteLine("Running in design-time mode!"); } else { // Code runs "for real" _dialogs.ShowMessage("Running in run-time mode!", "Injection Constructor", DialogButton.OK, DialogImage.Information); _logger.WriteLine("Running in run-time mode!"); } } public override void Cleanup() { // Clean up if needed _dialogs = null; _logger = null; base.Cleanup(); } } } And the OrderViewModel class: using GalaSoft.MvvmLight; using Microsoft.Practices.Unity; namespace MVVMLightUnityExample { /// <summary> /// This class contains properties that a View can data bind to. /// <para> /// Use the <strong>mvvminpc</strong> snippet to add bindable properties to this ViewModel. /// </para> /// <para> /// You can also use Blend to data bind with the tool's support. /// </para> /// <para> /// See http://www.galasoft.ch/mvvm/getstarted /// </para> /// </summary> public class OrderViewModel : ViewModelBase { private const string testOrderNumber = "123456"; private Order _order; /// <summary> /// Initializes a new instance of the OrderViewModel class. /// </summary> public OrderViewModel() : this(testOrderNumber) { } /// <summary> /// Initializes a new instance of the OrderViewModel class. /// </summary> public OrderViewModel(string orderNumber) { if (IsInDesignMode) { // Code runs in Blend --> create design time data. _order = new Order(orderNumber, "My Company", "Our Address"); } else { _order = GetOrder(orderNumber); } } public override void Cleanup() { // Clean own resources if needed _order = null; base.Cleanup(); } } } And the code that could be used to display an order view for a specific order: public void ShowOrder(string orderNumber) { // pass the order number to show to ViewModelLocator to be injected //into the constructor of the OrderViewModel instance ViewModelLocator.OrderToShow = orderNumber; View.OrderView orderView = new View.OrderView(); } These examples have been stripped down to show only the IoC ideas. It took a lot of trial and error, searching the internet for examples, and finding out that the Unity 2.0 documentation is lacking (at best) to come up with this solution. Let me know if you think it could be improved.

  Read the article

• Un-enlisting a BizTalk MSMQ send port in batch file

  - by SteveC

  I've got a solution which I setup / cleanup using batch files ... - there are a pair of MSMQ ports, send and receive, with another application on the end of the queues I'm finding I can't properly stop the orchestration in the batch file ... the error is the send port is unenlisted - I'm using the StopOrch.vbs script from the SDK samples But I can go into BizTalk Admin Console and manually stop the orchestration with Full Terminate Ok The setup / cleanup works Ok if I don't actually push any messages down the MSMQ queues

  Read the article

• Php Tidy : remove link and style tags inside body

  - by Franck

  Hello, I must cleanup some HTML code to remove <style> and <link> tags inside the <body> tag. I'm already using PHP Tidy to do some cleanup but I did not found how to remove those tags with PHP Tidy. Do you have a solution ? Or maybe another markup cleaner PHP class...

  Read the article

• TortoiseSVN - When I delete a folder I got trouble.

  - by Mendy

  A lot of times I need to delete a folder and copy another one with the same name. Always this is a place to trouble. What is the best way do do this? The error I got when I trying to commit: Error: Directory Error: '..\trunk\bin\MVCContrib\InputBuilderTemplates\.svn' Error: containing working copy admin area is missing Error: Please execute the 'Cleanup' command. The error I got when I trying to cleanup: '..\trunk\bin\MVCContrib\InputBuilderTemplates\.svn' is not a working copy directory.

  Read the article

• No root file system is defined error after installation

  - by LearnCode

  I installed ubuntu through Wubi and once i rebooted I get no root file system defined error. here's the output of the boot_info_script.Could anyone point me out where the error is. Boot Info Script 0.60 from 17 May 2011 ============================= Boot Info Summary: =============================== => Windows is installed in the MBR of /dev/sda. => Windows is installed in the MBR of /dev/sdb. sda1: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe /ntldr /ntdetect.com /wubildr /ubuntu/winboot/wubildr /wubildr.mbr /ubuntu/winboot/wubildr.mbr /ubuntu/disks/root.disk /ubuntu/disks/swap.disk sda1/Wubi: _____________________________________________________________________ File system: Boot sector type: Unknown Boot sector info: Mounting failed: mount: unknown filesystem type '' sda2: __________________________________________________________________________ File system: vfat Boot sector type: Unknown Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: /boot.ini /ntldr /NTDETECT.COM sdb1: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Disk /dev/sda: 160.0 GB, 160041885696 bytes 240 heads, 63 sectors/track, 20673 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 * 63 301,250,879 301,250,817 7 NTFS / exFAT / HPFS /dev/sda2 301,250,943 312,575,759 11,324,817 c W95 FAT32 (LBA) GUID Partition Table detected, but does not seem to be used. Partition Start Sector End Sector # of Sectors System /dev/sda1 323,465,741,313,502,988275,962,973,585-323,465,465,350,529,402 - /dev/sda2 242,728,591,638,290,720578,721,383,108,845,578335,992,791,470,554,859 - /dev/sda3 1,827,498,311,425,204,2562,091,935,274,843,009,907264,436,963,417,805,652 - /dev/sda4 579,711,218,081,401,3572,006,665,459,744,645,1521,426,954,241,663,243,796 - /dev/sda11 270,286,346,402,038,1183,786,543,326,404,525,9543,516,256,980,002,487,837 - /dev/sda12 4,179,681,002,230,769,6684,179,389,374,010,033,387-291,628,220,736,280 - /dev/sda13 232,556,480,979,456,1311,160,152,593,793,119,235927,596,112,813,663,105 - /dev/sda14 98,342,784,050,266,9183,691,264,578,843,725,1953,592,921,794,793,458,278 - /dev/sda15 2,307,845,219,957,882,4961,850,841,032,955,276,350-457,004,187,002,606,145 - /dev/sda16 512,592,046,878,946,497368,458,231,024,779,444-144,133,815,854,167,052 - /dev/sda17 2,504,135,232,870,384,3923,665,087,872,719,320,8291,160,952,639,848,936,438 - /dev/sda18 3,783,181,605,270,691,304122,034,509,624,708,942-3,661,147,095,645,982,361 - /dev/sda19 3,519,661,520,275,829,5122,376,243,094,723,723,587-1,143,418,425,552,105,924 - /dev/sda20 3,867,920,076,859,0744,494,691,111,933,625,1044,490,823,191,856,766,031 - /dev/sda21 1,500,144,061,909,253,7612,511,182,033,846,676,3401,011,037,971,937,422,580 - /dev/sda22 13,035,625,499,900,0062,360,168,613,941,394,9472,347,132,988,441,494,942 - /dev/sda23 4,228,978,682,068,599,48813,159,423,631,648,263-4,215,819,258,436,951,224 - /dev/sda24 3,695,955,742,872,046,9084,561,928,726,501,845,776865,972,983,629,798,869 - /dev/sda25 1,297,460,286,683,948,0461,444,350,486,339,417,957146,890,199,655,469,912 - /dev/sda26 1,228,858,248,533,131,831 0-1,228,858,248,533,131,830 - /dev/sda121 3,189,184,846,146,487,1461,849,820,258,006,914,852-1,339,364,588,139,572,293 - /dev/sda122 1,226,215,547,991,800,578389,781,518,734,546,300-836,434,029,257,254,277 - /dev/sda123 3,851,660,168,574,583,4654,046,215,657,583,031,556194,555,489,008,448,092 - /dev/sda124 1,197,460,980,174,153,341699,103,965,005,093,246-498,357,015,169,060,094 - Drive: sdb _____________________________________________________________________ Disk /dev/sdb: 750.2 GB, 750153367552 bytes 255 heads, 63 sectors/track, 91200 cylinders, total 1465143296 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sdb1 2,048 1,465,143,295 1,465,141,248 7 NTFS / exFAT / HPFS "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/loop0 iso9660 Ubuntu 11.04 amd64 /dev/loop1 squashfs /dev/sda1 E814B55B14B52E06 ntfs /dev/sda2 01CD-023B vfat HP_RECOVERY /dev/sdb1 7836F22A36F1E8D0 ntfs Elements ================================ Mount points: ================================= Device Mount_Point Type Options /dev/loop0 /cdrom iso9660 (ro,noatime) /dev/loop1 /rofs squashfs (ro,noatime) /dev/sdb1 /mnt fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) ================================ sda2/boot.ini: ================================ -------------------------------------------------------------------------------- [boot loader] timeout=0 default=C:\CMDCONS\BOOTSECT.DAT [operating systems] multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /fastdetect C:\CMDCONS\BOOTSECT.DAT="Microsoft Windows Recovery Console" /cmdcons -------------------------------------------------------------------------------- ======================== Unknown MBRs/Boot Sectors/etc: ======================== Unknown GPT Partiton Type c104043000e9b9040dff24b580010100 Unknown GPT Partiton Type 46313020746f20737461727420746865 Unknown GPT Partiton Type 65727920706172746974696f6e207761 Unknown GPT Partiton Type 727920706172746974696f6e0d0a0000 Unknown GPT Partiton Type 000f84e5f7668b162404e82804744066 Unknown GPT Partiton Type ce01e8dc038bfe66391624047505e8d9 Unknown GPT Partiton Type 0345086603f0e881030bd2740333d240 Unknown GPT Partiton Type bece01e8db0287fec645041266895508 Unknown GPT Partiton Type 01f60634010175078b363b01e854f5e8 Unknown GPT Partiton Type 313825740ffec03865107408fec03824 Unknown GPT Partiton Type 02f60634014074088bfdbece01e85101 Unknown GPT Partiton Type 263401f9e894f30f858ef4e8e201e8ec Unknown GPT Partiton Type f7e960f35245434f5645525966606633 Unknown GPT Partiton Type 660faf1e00106603dac3668b0e001066 Unknown GPT Partiton Type 8bfd386d04740583c710e2f6c36660c6 Unknown GPT Partiton Type 04ebf132c0b91000f3aac3bf0c04ebf3 Unknown GPT Partiton Type 02662bc1660fb71e0e02662bc366031e Unknown GPT Partiton Type f4b40ebb0700b901003c08751381ff25 Unknown GPT Partiton Type 534f465448494e4b90653f62011b0100 Unknown GPT Partiton Type 0b050900027777772e68702e636f6d00 Unknown GPT Partiton Type d441a0f5030003000ecb744a08bb3746 Unknown GPT Partiton Type f8579a116b4a7aa931cde97a4b9b5c09 Unknown GPT Partiton Type 7229990415b77c0a1970e7e824237a3a Unknown GPT Partiton Type afb6e34d6b4bd8c7c0eada19a9786cc3 Unknown BootLoader on sda1/Wubi 00000000 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 |0000000000000000| * 00000200 Unknown BootLoader on sda2 00000000 e9 a7 00 52 45 43 4f 56 45 52 59 00 02 08 20 00 |...RECOVERY... .| 00000010 02 00 00 00 00 f8 00 00 3f 00 f0 00 7f b9 f4 11 |........?.......| 00000020 8c cd ac 00 1e 2b 00 00 00 00 00 00 02 00 00 00 |.....+..........| 00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 00000040 80 00 29 3b 02 cd 01 20 20 20 20 20 20 20 20 20 |..);... | 00000050 20 20 46 41 54 33 32 20 20 20 8b d0 c1 e2 02 80 | FAT32 ......| 00000060 e6 01 66 c1 e8 07 66 3b 46 f8 74 2a 66 89 46 f8 |..f...f;F.t*f.F.| 00000070 66 03 46 f4 66 0f b6 5e 28 80 e3 0f 74 0f 3a 5e |f.F.f..^(...t.:^| 00000080 10 0f 83 90 00 66 0f af 5e 24 66 03 c3 bb e0 07 |.....f..^$f.....| 00000090 b9 01 00 e8 cf 00 8b da 66 8b 87 00 7e 66 25 ff |........f...~f%.| 000000a0 ff ff 0f 66 3d f8 ff ff 0f c3 33 c9 8e d9 8e c1 |...f=.....3.....| 000000b0 8e d1 66 bc f4 7b 00 00 bd 00 7c 66 0f b6 46 10 |..f..{....|f..F.| 000000c0 66 f7 66 24 66 0f b7 56 0e 66 03 56 1c 66 89 56 |f.f$f..V.f.V.f.V| 000000d0 f4 66 03 c2 66 89 46 fc 66 c7 46 f8 ff ff ff ff |.f..f.F.f.F.....| 000000e0 66 8b 46 2c 66 50 e8 af 00 bb 70 00 b9 01 00 e8 |f.F,fP....p.....| 000000f0 73 00 bf 00 07 b1 0b be a9 7d f3 a6 74 2a 03 f9 |s........}..t*..| 00000100 83 c7 15 81 ff 00 09 72 ec 66 40 4a 75 db 66 58 |[email protected]| 00000110 e8 47 ff 72 cf be b4 7d ac 84 c0 74 09 b4 0e bb |.G.r...}...t....| 00000120 07 00 cd 10 eb f2 cd 19 66 58 ff 75 09 ff 75 0f |........fX.u..u.| 00000130 66 58 bb 00 20 66 83 f8 02 72 da 66 3d f8 ff ff |fX.. f...r.f=...| 00000140 0f 73 d2 66 50 e8 50 00 0f b6 4e 0d e8 16 00 c1 |.s.fP.P...N.....| 00000150 e1 05 03 d9 66 58 53 e8 00 ff 5b 72 d8 8a 56 40 |....fXS...[r..V@| 00000160 ea 00 00 00 20 66 60 66 6a 00 66 50 53 6a 00 66 |.... f`fj.fPSj.f| 00000170 68 10 00 01 00 8b f4 b8 00 42 8a 56 40 cd 13 be |h........B.V@...| 00000180 c7 7d 72 94 67 83 44 24 06 20 66 67 ff 44 24 08 |.}r.g.D$. fg.D$.| 00000190 e2 e3 83 c4 10 66 61 c3 66 48 66 48 66 0f b6 56 |.....fa.fHfHf..V| 000001a0 0d 66 f7 e2 66 03 46 fc c3 4e 54 4c 44 52 20 20 |.f..f.F..NTLDR | 000001b0 20 20 20 20 0d 0a 4e 6f 20 53 79 73 74 65 6d 20 | ..No System | 000001c0 44 69 73 6b 20 6f 72 0d 0a 44 69 73 6b 20 49 2f |Disk or..Disk I/| 000001d0 4f 20 65 72 72 6f 72 0d 0a 50 72 65 73 73 20 61 |O error..Press a| 000001e0 20 6b 65 79 20 74 6f 20 72 65 73 74 61 72 74 0d | key to restart.| 000001f0 0a 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.| 00000200 =============================== StdErr Messages: =============================== umount: /isodevice: device is busy. (In some cases useful info about processes that use the device is found by lsof(8) or fuser(1))

  Read the article

• 10 tape technology features that make you go hmm.

  - by Karoly Vegh

  A week ago an Oracle/StorageTek Tape Specialist, Christian Vanden Balck, visited Vienna, and agreed to visit customers to do techtalks and update them about the technology boom going around tape. I had the privilege to attend some of his sessions and noted the information and features that took the customers by surprise and made them think. Allow me to share the top 10: I. StorageTek as a brand: StorageTek is one of he strongest names in the Tape field. The brand itself was valued so much by customers that even after Sun Microsystems acquiring StorageTek and the Oracle acquiring Sun the brand lives on with all the Oracle tapelibraries are officially branded StorageTek.See http://www.oracle.com/us/products/servers-storage/storage/tape-storage/overview/index.html II. Disk information density limitations: Disk technology struggles with information density. You haven't seen the disk sizes exploding lately, have you? That's partly because there are physical limits on a disk platter. The size is given, the number of platters is limited, they just can't grow, and are running out of physical area to write to. Now, in a T10000C tape cartridge we have over 1000m long tape. There you go, you have got your physical space and don't need to stuff all that data crammed together. You can write in a reliable pattern, and have space to grow too. III. Oracle has a market share of 62% worldwide in recording head manufacturing. That's right. If you are running LTO drives, with a good chance you rely on StorageTek production. That's two out of three LTO recording heads produced worldwide.  IV. You can store 1 Exabyte data in a single tape library. Yes, an Exabyte. That is 1000 Petabytes. Or, a million Terabytes. A thousand million GigaBytes. You can store that in a stacked StorageTek SL8500 tapelibrary. In one SL8500 you can put 10.000 T10000C cartridges, that store 10TB data (compressed). You can stack 10 of these SL8500s together. Boom. 1000.000 TB.(n.b.: stacking means interconnecting the libraries. Yes, cartridges are moved between the stacked libraries automatically.)  V. EMC: 'Tape doesn't suck after all. We moved on.': Do you remember the infamous 'Tape sucks, move on' Datadomain slogan? Of course they had to put it that way, having only had disk products. But here's a fun fact: on the EMCWorld 2012 there was a major presence of a Tape-tech company - EMC, in a sudden burst of sanity is embracing tape again. VI. The miraculous T10000C: Oracle StorageTek has developed an enterprise-grade tapedrive and cartridge, the T10000C. With awesome numbers: The Cartridge: Native 5TB capacity, 10TB with compression Over a kilometer long tape within the cartridge. And it's locked when unmounted, no rattling of your data.  Replaced the metalparticles datalayer with BaFe (bariumferrite) - metalparticles lose around 7% of magnetism within 30 days. BaFe does not. Yes we employ solid-state physicists doing R&D on demagnetisation in our labs. Can be partitioned, storage tiering within the cartridge!  The Drive: 2GB Cache Encryption implemented in HW - no performance hit 252 MB/s native sustained data rate, beats disk technology by far. Not to mention peak throughput.  Leading the tape while never touching the data side of it, protecting your data physically too Data integritiy checking (CRC recalculation) on tape within the drive without having to read it back to the server reordering data from tape-order, delivering it back in application-order  writing 32 tracks at once, reading them back for CRC check at once VII. You only use 20% of your data on a regular basis. The rest 80% is just lying around for years. On continuously spinning disks. Doubly consuming energy (power+cooling), blocking diskstorage capacity. There is a solution called SAM (Storage Archive Manager) that provides you a filesystem unifying disk and tape, moving data on-demand and for clients transparently between the different storage tiers. You can share these filesystems with NFS or CIFS for clients, and enjoy the low TCO of tape. Tapes don't spin. They sit quietly in their slots, storing 10TB data, using no energy, producing no heat, automounted when a client accesses their data.See: http://www.oracle.com/us/products/servers-storage/storage/storage-software/storage-archive-manager/overview/index.html VIII. HW supported for three decades: Did you know that the original PowderHorn library was released in '87 and has been only discontinued in 2010? That is over two decades of supported operation. Tape libraries are - just like the data carrying on tapecartridges - built for longevity. Oh, and the T10000C cartridge has 30-year archival life for long-term retention.  IX. Tape is easy to manage: Have you heard of Tape Storage Analytics? It is a central graphical tool to summarize, monitor, analyze dataflow, health and performance of drives and libraries, see: http://www.oracle.com/us/products/servers-storage/storage/tape-storage/tape-analytics/overview/index.html X. The next generation: The T10000B drives were able to reuse the T10000A cartridges and write on them even more data. On the same cartridges. We call this investment protection, and this is very important for Oracle for the future too. We usually support two generations of cartridges together. The current drive is a T10000C. (...I know I promised to enlist 10, but I got still two more I really want to mention. Allow me to work around the problem: ) X++. The TallBots, the robots moving around the cartridges in the StorageTek library from tapeslots to the drives are cableless. Cables, belts, chains running to moving parts in a library cause maintenance downtimes. So StorageTek eliminated them. The TallBots get power, commands, even firmwareupgrades through the rails they are running on. Also, the TallBots don't just hook'n'pull the tapes out of their slots, they actually grip'n'lift them out. No friction, no scratches, no zillion little plastic particles floating around in the library, in the drives, on your data. (X++)++: Tape beats SSDs and Disks. In terms of throughput (252 MB/s), in terms of TCO: disks cause around 290x more power and cooling, in terms of capacity: 10TB on a single media and soon more.  So... do you need to store large amounts of data? Are you legally bound to archive it for dozens of years? Would you benefit from automatic storage tiering? Have you got large mediachunks to be streamed at times? Have you got power and cooling issues in the growing datacenters? Do you find EMC's 180° turn of tape attitude interesting, but appreciate it at the same time? With all that, you aren't alone. The most data on this planet is stored on tape. Tape is coming. Big time.

  Read the article

• Real tortoises keep it slow and steady. How about the backups?

  - by Maria Zakourdaev

    … Four tortoises were playing in the backyard when they decided they needed hibiscus flower snacks. They pooled their money and sent the smallest tortoise out to fetch the snacks. Two days passed and there was no sign of the tortoise. "You know, she is taking a lot of time", said one of the tortoises. A little voice from just out side the fence said, "If you are going to talk that way about me I won't go." Is it too much to request from the quite expensive 3rd party backup tool to be a way faster than the SQL server native backup? Or at least save a respectable amount of storage by producing a really smaller backup files?  By saying “really smaller”, I mean at least getting a file in half size. After Googling the internet in an attempt to understand what other “sql people” are using for database backups, I see that most people are using one of three tools which are the main players in SQL backup area:  LiteSpeed by Quest SQL Backup by Red Gate SQL Safe by Idera The feedbacks about those tools are truly emotional and happy. However, while reading the forums and blogs I have wondered, is it possible that many are accustomed to using the above tools since SQL 2000 and 2005.  This can easily be understood due to the fact that a 300GB database backup for instance, using regular a SQL 2005 backup statement would have run for about 3 hours and have produced ~150GB file (depending on the content, of course).  Then you take a 3rd party tool which performs the same backup in 30 minutes resulting in a 30GB file leaving you speechless, you run to management persuading them to buy it due to the fact that it is definitely worth the price. In addition to the increased speed and disk space savings you would also get backup file encryption and virtual restore -  features that are still missing from the SQL server. But in case you, as well as me, don’t need these additional features and only want a tool that performs a full backup MUCH faster AND produces a far smaller backup file (like the gain you observed back in SQL 2005 days) you will be quite disappointed. SQL Server backup compression feature has totally changed the market picture. Medium size database. Take a look at the table below, check out how my SQL server 2008 R2 compares to other tools when backing up a 300GB database. It appears that when talking about the backup speed, SQL 2008 R2 compresses and performs backup in similar overall times as all three other tools. 3rd party tools maximum compression level takes twice longer. Backup file gain is not that impressive, except the highest compression levels but the price that you pay is very high cpu load and much longer time. Only SQL Safe by Idera was quite fast with it’s maximum compression level but most of the run time have used 95% cpu on the server. Note that I have used two types of destination storage, SATA 11 disks and FC 53 disks and, obviously, on faster storage have got my backup ready in half time. Looking at the above results, should we spend money, bother with another layer of complexity and software middle-man for the medium sized databases? I’m definitely not going to do so.  Very large database As a next phase of this benchmark, I have moved to a 6 terabyte database which was actually my main backup target. Note, how multiple files usage enables the SQL Server backup operation to use parallel I/O and remarkably increases it’s speed, especially when the backup device is heavily striped. SQL Server supports a maximum of 64 backup devices for a single backup operation but the most speed is gained when using one file per CPU, in the case above 8 files for a 2 Quad CPU server. The impact of additional files is minimal.  However, SQLsafe doesn’t show any speed improvement between 4 files and 8 files. Of course, with such huge databases every half percent of the compression transforms into the noticeable numbers. Saving almost 470GB of space may turn the backup tool into quite valuable purchase. Still, the backup speed and high CPU are the variables that should be taken into the consideration. As for us, the backup speed is more critical than the storage and we cannot allow a production server to sustain 95% cpu for such a long time. Bottomline, 3rd party backup tool developers, we are waiting for some breakthrough release. There are a few unanswered questions, like the restore speed comparison between different tools and the impact of multiple backup files on restore operation. Stay tuned for the next benchmarks.    Benchmark server: SQL Server 2008 R2 sp1 2 Quad CPU Database location: NetApp FC 15K Aggregate 53 discs Backup statements: No matter how good that UI is, we need to run the backup tasks from inside of SQL Server Agent to make sure they are covered by our monitoring systems. I have used extended stored procedures (command line execution also is an option, I haven’t noticed any impact on the backup performance). SQL backup LiteSpeed SQL Backup SQL safe backup database <DBNAME> to disk= '\\<networkpath>\par1.bak' , disk= '\\<networkpath>\par2.bak', disk= '\\<networkpath>\par3.bak' with format, compression EXECUTE master.dbo.xp_backup_database @database = N'<DBName>', @backupname= N'<DBName> full backup', @desc = N'Test', @compressionlevel=8, @filename= N'\\<networkpath>\par1.bak', @filename= N'\\<networkpath>\par2.bak', @filename= N'\\<networkpath>\par3.bak', @init = 1 EXECUTE master.dbo.sqlbackup '-SQL "BACKUP DATABASE <DBNAME> TO DISK= ''\\<networkpath>\par1.sqb'', DISK= ''\\<networkpath>\par2.sqb'', DISK= ''\\<networkpath>\par3.sqb'' WITH DISKRETRYINTERVAL = 30, DISKRETRYCOUNT = 10, COMPRESSION = 4, INIT"' EXECUTE master.dbo.xp_ss_backup @database = 'UCMSDB', @filename = '\\<networkpath>\par1.bak', @backuptype = 'Full', @compressionlevel = 4, @backupfile = '\\<networkpath>\par2.bak', @backupfile = '\\<networkpath>\par3.bak' If you still insist on using 3rd party tools for the backups in your production environment with maximum compression level, you will definitely need to consider limiting cpu usage which will increase the backup operation time even more: RedGate : use THREADPRIORITY option ( values 0 – 6 ) LiteSpeed : use  @throttle ( percentage, like 70%) SQL safe :  the only thing I have found was @Threads option.   Yours, Maria

  Read the article

• My smtp server is spammed?

  - by Milos

  I have a server and the postfix client on it. Since several days, I noticed a lot of processes running there. When checked, there are a lot of emails sent. Here is an example from the mail log: Aug 18 11:54:56 mem postfix/smtpd[9963]: connect from dslb-188-096-082-167.188.096.pools.vodafone-ip.de[188.96.82.167] Aug 18 11:54:56 mem postfix/smtpd[9301]: connect from unknown[186.113.45.4] Aug 18 11:54:56 mem postfix/smtpd[9963]: 525E7114012D: client=dslb-188-096-082-167.188.096.pools.vodafone-ip.de[188.96.82.167] Aug 18 11:54:56 mem postfix/cleanup[9970]: 525E7114012D: message-id=<B55835C9027BFA9D16CCBB556DB2F48BB82DF004000480BA-db0c3ce8aa74446411898d0d2feb3001@email.filmforthoughtinc.com> Aug 18 11:54:56 mem postfix/qmgr[2581]: 525E7114012D: from=<[email protected]>, size=10702, nrcpt=1 (queue active) Aug 18 11:54:56 mem postfix/smtpd[9301]: EC52711401DC: client=unknown[186.113.45.4] Aug 18 11:54:57 mem postfix/smtpd[9963]: disconnect from dslb-188-096-082-167.188.096.pools.vodafone-ip.de[188.96.82.167] Aug 18 11:54:57 mem postfix/cleanup[8597]: EC52711401DC: message-id=<4C905D97606B436FE50C6F738DE014D9D84F2185BA815D81-1a4dbe6fc2bfcc8183f5faf901cfa15e@email.manguerasespecializadas.com> Aug 18 11:54:57 mem postfix/smtp[9971]: 525E7114012D: to=<[email protected]>, relay=mail.mdpi.com[209.237.236.228]:25, delay=1.2, delays=0.55/0/0.45/0.16, dsn=5.1.1, status=bounced (host mail.mdpi.com[209.237.236.228] said: 550 5.1.1 <[email protected]>: Recipient address rejected: mdpi.com (in reply to RCPT TO command)) Aug 18 11:54:57 mem postfix/cleanup[10067]: 8B1E11140268: message-id=<[email protected]> Aug 18 11:54:57 mem postfix/bounce[10001]: 525E7114012D: sender non-delivery notification: 8B1E11140268 Aug 18 11:54:57 mem postfix/qmgr[2581]: 8B1E11140268: from=<>, size=12693, nrcpt=1 (queue active) Aug 18 11:54:57 mem postfix/qmgr[2581]: 525E7114012D: removed Aug 18 11:54:57 mem postfix/qmgr[2581]: EC52711401DC: from=<[email protected]>, size=10978, nrcpt=1 (queue active) Aug 18 11:54:57 mem postfix/smtp[10013]: connect to aspmx.l.google.com[2607:f8b0:400d:c03::1b]:25: Network is unreachable Aug 18 11:54:57 mem postfix/smtpd[9301]: disconnect from unknown[186.113.45.4] Aug 18 11:54:58 mem postfix/smtp[10013]: 8B1E11140268: to=<[email protected]>, relay=aspmx.l.google.com[74.125.22.26]:25, delay=0.5, delays=0.06/0/0.28/0.16, dsn=5.1.1, status=bounced (host aspmx.l.google.com[74.125.22.26] said: 550-5.1.1 The email account that you tried to reach does not exist. Please try 550-5.1.1 double-checking the recipient's email address for typos or 550-5.1.1 unnecessary spaces. Learn more at 550 5.1.1 http://support.google.com/mail/bin/answer.py?answer=6596 l7si24621420qad.26 - gsmtp (in reply to RCPT TO command)) Aug 18 11:54:58 mem postfix/qmgr[2581]: 8B1E11140268: removed Aug 18 11:54:58 mem postfix/smtp[9971]: EC52711401DC: to=<[email protected]>, relay=mail.mdpi.com[209.237.236.228]:25, delay=1.2, delays=0.66/0/0.44/0.12, dsn=5.1.1, status=bounced (host mail.mdpi.com[209.237.236.228] said: 550 5.1.1 <[email protected]>: Recipient address rejected: mdpi.com (in reply to RCPT TO command)) Aug 18 11:54:58 mem postfix/cleanup[9970]: 414361140254: message-id=<[email protected]> Aug 18 11:54:58 mem postfix/bounce[10001]: EC52711401DC: sender non-delivery notification: 414361140254 Aug 18 11:54:58 mem postfix/qmgr[2581]: 414361140254: from=<>, size=13057, nrcpt=1 (queue active) Aug 18 11:54:58 mem postfix/qmgr[2581]: EC52711401DC: removed Aug 18 11:55:01 mem postfix/smtp[10002]: 414361140254: to=<[email protected]>, relay=manguerasespecializadas.com[99.198.96.210]:25, delay=2.9, delays=0.04/0/2.1/0.84, dsn=2.0.0, status=sent (250 OK id=1XJPGs-0007BE-OI) Aug 18 11:55:01 mem postfix/qmgr[2581]: 414361140254: removed IS my server attacked, spammed? How to check that? Thank you.

  Read the article

• Attempted to dual boot with Windows and now can only run Ubuntu

  - by Zeusoflightning125

  Very recently, I decided to attempt to dual boot Ubuntu with my already installed windows 8. Everything worked perfectly, I manually set up disk partitions (this is all on 1 hard drive), and it loaded up Ubuntu fine. HOWEVER, now when I try to load up my computer it only has 2 options in the boot menu and both just load up Windows (both were something related to hard disk). I also can only boot from legacy hard disk things. (I already only was able to aside from my USB that I installed Windows from) The Windows files are still accessible from Ubuntu, but I cannot just load Windows. There is no option to. I also don't have the 2 buttons for each operating system I was expecting. I can only select the thing to load from BIOS. So, my question is, how do I load the Windows partition on my hard drive? I'm sorry if I'm a bit clueless I am just new to both Linux and dual-booting.

  Read the article

< Previous Page | 96 97 98 99 100 101 102 103 104 105 106 107  | Next Page >