Search Results

Search found 60391 results on 2416 pages for 'data generation'.

Page 1004/2416 | < Previous Page | 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011  | Next Page >

  • AudioFileWriteBytes fails with error code -40

    - by alexbw
    I'm trying to write raw audio bytes to a file using AudioFileWriteBytes(). Here's what I'm doing: void writeSingleChannelRingBufferDataToFileAsSInt16(AudioFileID audioFileID, AudioConverterRef audioConverter, ringBuffer *rb, SInt16 *holdingBuffer) { // First, figure out which bits of audio we'll be // writing to file from the ring buffer UInt32 lastFreshSample = rb->lastWrittenIndex; OSStatus status; int numSamplesToWrite; UInt32 numBytesToWrite; if (lastFreshSample < rb->lastReadIndex) { numSamplesToWrite = kNumPointsInWave + lastFreshSample - rb->lastReadIndex - 1; } else { numSamplesToWrite = lastFreshSample - rb->lastReadIndex; } numBytesToWrite = numSamplesToWrite*sizeof(SInt16); Then we copy the audio data (stored as floats) to a holding buffer (SInt16) that will be written directly to the file. The copying looks funky because it's from a ring buffer. UInt32 buffLen = rb->sizeOfBuffer - 1; for (int i=0; i < numSamplesToWrite; ++i) { holdingBuffer[i] = rb->data[(i + rb->lastReadIndex) & buffLen]; } Okay, now we actually try to write the audio from the SInt16 buffer "holdingBuffer" to the audio file. The NSLog will spit out an error -40, but also claims that it's writing bytes. No data is written to file. status = AudioFileWriteBytes(audioFileID, NO, 0, &numBytesToWrite, &holdingBuffer); rb->lastReadIndex = lastFreshSample; NSLog(@"Error = %d, wrote %d bytes", status, numBytesToWrite); return;

    Read the article

  • detecting pauses in a spoken word audio file using pymad, pcm, vad, etc

    - by james
    First I am going to broadly state what I'm trying to do and ask for advice. Then I will explain my current approach and ask for answers to my current problems. Problem I have an MP3 file of a person speaking. I'd like to split it up into segments roughly corresponding to a sentence or phrase. (I'd do it manually, but we are talking hours of data.) If you have advice on how to do this programatically or for some existing utilities, I'd love to hear it. (I'm aware of voice activity detection and I've looked into it a bit, but I didn't see any freely available utilities.) Current Approach I thought the simplest thing would be to scan the MP3 at certain intervals and identify places where the average volume was below some threshold. Then I would use some existing utility to cut up the mp3 at those locations. I've been playing around with pymad and I believe that I've successfully extracted the PCM (pulse code modulation) data for each frame of the mp3. Now I am stuck because I can't really seem to wrap my head around how the PCM data translates to relative volume. I'm also aware of other complicating factors like multiple channels, big endian vs little, etc. Advice on how to map a group of pcm samples to relative volume would be key. Thanks!

    Read the article

  • Access to multiple ItemRenderers within an AdvancedDataGrid

    - by user310340
    I've create an AdvancedDataGrid where most of the cell are based on an ItemRenderer. The custom ItemRenderer (SoundBox) extends VBox. This custom component allow for simple changes in the background color based on user clicking on a cell. Here is the snippet of the AdvancedDataGrid (nothing too advanced): <mx:AdvancedDataGrid id="fsfw" dataProvider="{fsfWordList}" sortableColumns="false" > <mx:groupedColumns> <mx:AdvancedDataGridColumn width="35" dataField="wordcount" headerText=" "/> <mx:AdvancedDataGridColumn id="myWord" width="150" headerText="TEST ITEMS"> <mx:itemRenderer> <mx:Component> <components:SoundBox width="100%" letterSound="{data.word}" /> </mx:Component> </mx:itemRenderer> </mx:AdvancedDataGridColumn> <mx:AdvancedDataGridColumn width="200" headerText="Correct / 2 points" dataField="sound1"> <mx:itemRenderer> <mx:Component> <components:SoundBox width="100%" letterSound="{data.sound1}" pointColumn="2"/> </mx:Component> </mx:itemRenderer> </mx:AdvancedDataGridColumn> </mx:groupedColumns> </AdvancedDataGrid> What I'm trying to do is change the background color of (let's just say I have one row of data) row1, cell1 to green when the user clicks on cell3 of row1. I'm unsure as to how I get access to those items (ItemRenderer/SoundBox) within the Grid. Any Ideas? THX!

    Read the article

  • Problems with jQuery load and getJSON only when using Chrome

    - by leftend
    I'm having an issue with two jQuery calls. The first is a "load" that retrieves HTML and displays it on the page (it does include some Javascript and CSS in the code that is returned). The second is a "getJSON" that returns JSON - the JSON returned is valid. Everything works fine in every other browser I've tried - except Chrome for either Windows or Mac. The page in question is here: http://urbanistguide.com/category/Contemporary.aspx When you click on a Restaurant name in IE/FF, you should see that item expand with more info - and a map displayed to the right. However, if you do this in Chrome all you get is the JSON data printed to the screen. The first problem spot is when the "load" function is called here: var fulllisting = top.find(".listingfull"); fulllisting.load(href2, function() { fulllisting.append("<div style=\"width:99%;margin-top:10px;text-align:right;\"><a href=\"#\" class=\"" + obj.attr("id") + "\">X</a>"); itemId = fulllisting.find("a.listinglink").attr("id"); ... In the above code, the callback function doesn't seem to get invoked. The second problem spot is when the "getJSON" function is called: $.getJSON(href, function(data) { if (data.error.length > 0) { //display error message } else { ... } In this case - it just seems to follow the link instead of performing the callback... and yes, I am doing a "return false;" at the end of all of this to prevent the link from executing. All of the rest of the code is inline on that page if you want to view the source code. Any ideas?? Thanks

    Read the article

  • GAE python database object design for simple list of values

    - by Joey
    I'm really new to database object design so please forgive any weirdness in my question. Basically, I am use Google AppEngine (Python) and contructing an object to track user info. One of these pieces of data is 40 Achievement scores. Do I make a list of ints in the User object for this? Or do I make a separate entity with my user id, the achievement index (0-39) and the score and then do a query to grab these 40 items every time I want to get the user data in total? The latter approach seems more object oriented to me, and certainly better if I extend it to have more than just scores for these 40 achievements. However, considering that I might not extend it, should I even consider just doing a simple list of 40 ints in my user data? I would then forgo doing a query, getting the sorted list of achievements, reading the score from each one just to process a response etc. Is doing this latter approach just such a common practice and hand-waved as not even worth batting an eyelash at in terms of thinking it might be more costly or complex processing wise?

    Read the article

  • Oracle sqlldr: column not allowed here

    - by Wade Williams
    Can anyone spot the error in this attempted data load? The '\\N' is because this is an import of an OUTFILE dump from mysql, which puts \N for NULL fields. The decode is to catch cases where the field might be an empty string, or might have \N. Using Oracle 10g on Linux. load data infile objects.txt discardfile objects.dsc truncate into table objects fields terminated by x'1F' optionally enclosed by '"' (ID INTEGER EXTERNAL NULLIF (ID='\\N'), TITLE CHAR(128) NULLIF (TITLE='\\N'), PRIORITY CHAR(16) "decode(:PRIORITY, BLANKS, NULL, '\\N', NULL)", STATUS CHAR(64) "decode(:STATUS, BLANKS, NULL, '\\N', NULL)", ORIG_DATE DATE "YYYY-MM-DD HH:MM:SS" NULLIF (ORIG_DATE='\\N'), LASTMOD DATE "YYYY-MM-DD HH:MM:SS" NULLIF (LASTMOD='\\N'), SUBMITTER CHAR(128) NULLIF (SUBMITTER='\\N'), DEVELOPER CHAR(128) NULLIF (DEVELOPER='\\N'), ARCHIVE CHAR(4000) NULLIF (ARCHIVE='\\N'), SEVERITY CHAR(64) "decode(:SEVERITY, BLANKS, NULL, '\\N', NULL)", VALUED CHAR(4000) NULLIF (VALUED='\\N'), SRD DATE "YYYY-MM-DD" NULLIF (SRD='\\N'), TAG CHAR(64) NULLIF (TAG='\\N') ) Sample Data (record 1). The ^_ represents the unprintable 0x1F delimiter. 1987^_Component 1987^_\N^_Done^_2002-10-16 01:51:44^_2002-10-16 01:51:44^_import^_badger^_N^_^_N^_0000-00-00^_none Error: Record 1: Rejected - Error on table objects, column SEVERITY. ORA-00984: column not allowed here

    Read the article

  • How to pass multiple parameter in DomainService - WCF

    - by S.Amani
    Hi, Let's say I have a window which should submit 3 model in client side (Silverlight Client Application). My problem is each time I submit the form, data on the server side which I passed them from client are empty. I've used nested class which contains my models, instead of passing multiple object as parameter, but it didn't work again. My Personnel Data Transfer Object Code is something like this : [DataContract] public class PersonnelDTO : EntityObject { [Key] [DataMember] public int PersonnelId { get; set; } [Include] [DataMember] [Association("Personnel_ID", "PersonnelId", "Personnel_ID")] public Personnel Personnel { get; set; } [Include] [DataMember] [Association("Personnel_Info_ID", "PersonnelId", "Personnel_Info_ID")] public Personnel_Info PersonnelInfo { get; set; } } I fill up this model to pass data from client to server (DomainService). and also my domain service code is : [Invoke] public void AddPersonnel(PersonnelDTO personnelDTO) { // Model are EMPTY in DTO ObjectContext.AddToPersonnels(personnelDTO.Personnel); ObjectContext.AddToPersonnel_Info(personnelDTO.PersonnelInfo); ObjectContext.SaveChanges(); } I don't know if there is a way to pass multiple parameter in WCF Service method include Generic List. Any advice will be graceful. Thanks.

    Read the article

  • get column names from a table where one of the column name is a key word.

    - by syedsaleemss
    Im using c# .net windows form application. I have created a database which has many tables. In one of the tables I have entered data. In this table I have 4 columns named key, name,age,value. Here the name "key" of the first column is a key word. Now I am trying to get these column names into a combo box. I am unable to get the name "key". It works for "key" when I use this code: private void comboseccolumn_SelectedIndexChanged(object sender, EventArgs e) { string dbname = combodatabase.SelectedItem.ToString(); string path = @"Data Source=" + textBox1.Text + ";Initial Catalog=" + dbname + ";Integrated Security=SSPI"; //string path=@"Data Source=SYED-PC\SQLEXPRESS;Initial Catalog=resources;Integrated Security=SSPI"; SqlConnection con = new SqlConnection(path); string tablename = comboBox2.SelectedItem.ToString(); //string query= "Select * from" +tablename+; //SqlDataAdapter adp = new SqlDataAdapter(" Select [Key] ,value from " + tablename, con); SqlDataAdapter adp = new SqlDataAdapter(" Select [" + combofirstcolumn.SelectedItem.ToString() + "]," + comboseccolumn.SelectedItem.ToString() + "\t from " + tablename, con); DataTable dt = new DataTable(); adp.Fill(dt); dataGridView1.DataSource = dt; } This is beacuse I am using "[" in the select query. But it wont work for non keys. Or if I remove the "[" it is not working for key . Please suggest me so that I can get both key as well as nonkey column names.

    Read the article

  • Web user expectations

    - by Ash
    When designing a good Web GUI what expectations can we expect from an end user? I've come up with the following, but I wonder if there are any others which can suggest.. If I click on a hyperlink it will take me to another page/part of this page If I tick/untick a checkbox it might alter the page state (enable/disable elements) If I click on a button I expect it to do something to data. If I click on a button I expect something to happen immediately (either to the current page, or for me to be taken to another page) If I have clicked on a hyperlink and it has taken me to another page, I expect to be able to use the Back button to get back to the previous page in a state similar to that which I left it in If I change something in a form, I can change it back to its previous value if necessary Unless I click on the 'Submit' button nothing should happen to my data. If I bookmark/favourite a page then it should show the same related data each time I visit it If text is underlined and looks like a link, it should be a link and act as one The reasoning behind this question is more a 'UI from hell' one. For example I have come across pages which checking a tickbox next to a record will delete it, straight away, via ajax. To me that just seems wrong, a checkbox is a toggle - something which a delete operation definitely isn't!

    Read the article

  • What is the Best way to databind an ASP.NET TreeView for table with many to many parent child relati

    - by Matt W
    I've got a table which has the usual ParentID, ChildID as it's first two columns in a self-referencing tree data structure. My issue is that when I pull this out and use the following code: DataSet set = DA.GetNewCategories(); set.Relations.Add( new DataRelation("parentChildCategories", set.Tables[0].Columns["CategoryParentID"], set.Tables[0].Columns["CategoryID"]) ); StringBuilder buildXml = new StringBuilder(); StringWriter writer = new StringWriter(buildXml); set.WriteXml(writer); TreeView2.DataSource = new HierarchicalDataSet(set, "CategoryID", "CategoryParentID"); TreeView2.DataBind(); I get the error: These columns don't currently have unique values I believe this is because my data has children with multiple parent nodes. This is fine for my application - I don't mind if one row of data is rendered in multiple nodes of my TreeView. Could someone shed light on this please? It doesn't seem unreasonable to have a DataSet render XML which has nodes appearing in multiple places, but I can't figure out how to do it. Thanks, Matt.

    Read the article

  • Retrieving image from database using Ajax

    - by ama
    I'm trying to read image from database with Ajax, but I could not read the xmlhttp.responseText to the img src. The image is saved as binary data in database and also retrieved as binary data. I'm using Ajax in JSP, because I want to give the user the ability to upload images and I will view the last uploaded image, on mouse over action the Ajax will be activated and get the image back, the problem is in reading the img from the response. This is the Ajax function: function ajaxFunction(path) { if (xmlhttp) { var s = path; xmlhttp.open("GET", s, true); xmlhttp.onreadystatechange = handleServerResponse; xmlhttp.send(null); } } function handleServerResponse() { if (xmlhttp.readyState == 4) { var Image = document.getElementById(Image_Element_Name); document.getElementById(Image_Element_Name).src = "data:" + xmlhttp.responseText; } } I also got exception in the server: 10415315 [TP-Processor1] WARN core.MsgContext - Error sending end packet java.net.SocketException: Broken pipe at java.net.SocketOutputStream.socketWrite0(Native Method) at java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:92) at java.net.SocketOutputStream.write(SocketOutputStream.java:136) at org.apache.jk.common.ChannelSocket.send(ChannelSocket.java:537) at org.apache.jk.common.JkInputStream.endMessage(JkInputStream.java:127) at org.apache.jk.core.MsgContext.action(MsgContext.java:302) at org.apache.coyote.Response.action(Response.java:183) at org.apache.coyote.Response.finish(Response.java:305) at org.apache.catalina.connector.OutputBuffer.close(OutputBuffer.java:281) at org.apache.catalina.connector.Response.finishResponse(Response.java:478) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:154) at org.apache.jk.server.JkCoyoteHandler.invoke(JkCoyoteHandler.java:200) at org.apache.jk.common.HandlerRequest.invoke(HandlerRequest.java:283) at org.apache.jk.common.ChannelSocket.invoke(ChannelSocket.java:773) at org.apache.jk.common.ChannelSocket.processConnection(ChannelSocket.java:703) at org.apache.jk.common.ChannelSocket$SocketConnection.runIt(ChannelSocket.java:895) at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:685) at java.lang.Thread.run(Thread.java:619) 10415316 [TP-Processor1] WARN common.ChannelSocket - processCallbacks status 2

    Read the article

  • python: how to design a container with elements that must reference their container

    - by Luke404
    (the title is admittedly not that great. Please forgive my English, this is the best I could think of) I'm writing a python script that will manage email domains and their accounts, and I'm also a newby at OOP design. My two (related?) issues are: the Domain class must do special work to add and remove accounts, like adding/removing them to the underlying implementation how to manage operations on accounts that must go through their container To solve the former issue I'd add a factory method to the Domain class that'll build an Account instance in that domain, and a 'remove' (anti-factory?) method to handle deletions. For the latter this seems to me "anti-oop" since what would logically be an operation on an Account (eg, change password) must always reference the containing Domain. Seems to me that I must add to the Account a reference back to the Domain and use that to get data (like the domain name) or call methods on the Domain class. Code example (element uses data from the container) that manages an underlying Vpopmail system: class Account: def __init__(self, name, password, domain): self.name = name self.password = password self.domain = domain def set_password(self, password): os.system('vpasswd %s@%s %s' % (self.name, self.domain.name, password) self.password = password class Domain: def __init__(self, domain_name): self.name = domain_name self.accounts = {} def create_account(self, name, password): os.system('vadduser %s@%s %s' % (name, self.name, password)) account = Account(name, password, self) self.accounts[name] = account def delete_account(self, name): os.system('vdeluser %s@%s' % (name, self.name)) del self.accounts[name] another option would be for Account.set_password to call a Domain method that would do the actual work - sounds equally ugly to me. Also note the duplication of data (account name also as dict key), it sounds logical (account names are "primary key" inside a domain) but accounts need to know their own name.

    Read the article

  • Large Reports for MSRS

    - by Greg Lorenz
    I have a report that needs to be able to render a very large amount of pages (about 4500 in this instance) in a web browser. The total time needed to finish on the report server from start time to end time is about 30 mins for the instance that I am looking at. Does anyone know what options exist for handling the rendering of such a large report in a web browser? In terms of looking into how this can be resolved I have already performed the following tasks. The report gets its data off of a database table that already has the data flattened to the point that the TimeDataRetrieval on the report server is 17812 or about 18 secs. The report itself has been reformatted to include the least expensive report objects that it can in order to render the data in the correct format. I basically consists of a table with about 4 nested tables and thats it. We were trying to accomplish this on a 2005 report server but continued to run into memory issues that were not feasible for our clients. In response to that we moved this onto a 2008 report server to take advantage of the fact that it uses the file system instead of memory and finally were able to get this to work without running out of the available memory but of course it takes much longer.

    Read the article

  • Sybase: how can I remove non-printable characters from CHAR or VARCHAR fields with SQL?

    - by Kenny Drobnack
    I'm working with a Sybase database that seems to have non-printable characters in some of the string fields and this is throwing off some of our processing code. At first glance, it seemed to only be newlines and carriage returns, but we also have an ASCII code 27 in there - an ESC character, some accented characters, and some other oddities in there. I have no direct access to change the database, so changing the bad data isn't an option, yet. For now I have to make do with just filtering it out. We're trying to export the table data from one database and load it into a database used by another application in a nightly batch process. Ideally, I'd like to have a function that I can pass a list of characters and just have Sybase return the data with those characters removed. I'd like to keep it something we could do in plain SQL if possible. Something like this to remove characters that are ASCII 0 - 31. select str_replace(FIELD1, (0-31), NULL) as FIELD1, str_replace(FIELD2, (0-31), NULL) as FIELD2 from TABLE So far, str_replace is the nearest I can find, but it only allows replacing one string with another. No support for character ranges and won't let me do the above. We're running on Sybase ASE 12.5 on Unix servers.

    Read the article

  • Java Swing MVC question

    - by juFo
    I'm following this MVC model: http://java.sun.com/developer/technicalArticles/javase/mvc/ In my model I have an "ArrayList shapes" field and I need the shapes in my view. Is the only way of getting my shapes by getting them in the modelPropertyChange method? public void modelPropertyChange(PropertyChangeEvent evt) { if (evt.getPropertyName().equals(MyController.PROPERTY_TEXT)) { ArrayList<Shape> shapes = (ArrayList<Shape>) evt.getNewValue(); } } or should I also create a generic getter method in my controller? like this generic setter method: protected void setModelProperty(String propertyName, Object newValue) { for (AbstractModel model: registeredModels) { try { Method method = model.getClass(). getMethod("set"+propertyName, new Class[] { newValue.getClass() } ); method.invoke(model, newValue); } catch (Exception ex) { // Handle exception. } } } If I need such a generic getter method, I have no clue how to transform this generic setter above to a generic getter method. If I don't need such a generic getter method to retreive my data from the model, if I only need the modelPropertyChange method from my View. How would I get my data from the model the first time the application starts? :o Pfft I need to get my arraylist of shapes from my model in my view :( (and later I need to get some other data also) So confusing :(

    Read the article

  • Runtime binding of XML Schema to Java code

    - by Yaneeve
    Hi all, The situation is thus: I have an application which provides editing capabilities to XML an file. This file follows a certain Schema. The Schema belongs to a subset of Schemas which actually follow a line of evolution from one to another - so they are not so different from one another. The main difference between the schemas is an enumeration of string labels. I now have need to save "meta data" in XML format (This is a second type of XML file). This "meta data" contains a list of labels from the set enumerated in the schema. The application can accept a new schema at runtime and adjust itself. Therefore I have an XML file that must be validated by two schemas one static containing the basic structure of the "meta data" stored in the XML and one which contains the 'proper' label enumeration. The latter schema is determined at runtime. I have glanced over JAXB, XMLBeans and JiBX. I can't figure out what technology to choose that would allow for a runtime bind of code and schema in the way that would most benefit my use-case. Any suggestions? Thanks!

    Read the article

  • C# StreamReader.EndOfStream produces IOException

    - by Ziplin
    I'm working on an application that accepts TCP connections and reads in data until an </File> marker is read and then writes that data to the filesystem. I don't want to disconnect, I want to let the client sending the data to do that so they can send multiple files in one connection. I'm using the StreamReader.EndOfStream around my outter loop, but it throws an IOException when the client disconnects. Is there a better way to do this? private static void RecieveAsyncStream(IAsyncResult ar) { TcpListener listener = (TcpListener)ar.AsyncState; TcpClient client = listener.EndAcceptTcpClient(ar); // init the streams NetworkStream netStream = client.GetStream(); StreamReader streamReader = new StreamReader(netStream); StreamWriter streamWriter = new StreamWriter(netStream); while (!streamReader.EndOfStream) // throws IOException { string file= ""; while (file!= "</File>" && !streamReader.EndOfStream) { file += streamReader.ReadLine(); } // write file to filesystem } listener.BeginAcceptTcpClient(RecieveAsyncStream, listener); }

    Read the article

  • Simple, fast SQL queries for flat files.

    - by plinehan
    Does anyone know of any tools to provide simple, fast queries of flat files using a SQL-like declarative query language? I'd rather not pay the overhead of loading the file into a DB since the input data is typically thrown out almost immediately after the query is run. Consider the data file, "animals.txt": dog 15 cat 20 dog 10 cat 30 dog 5 cat 40 Suppose I want to extract the highest value for each unique animal. I would like to write something like: cat animals.txt | foo "select $1, max(convert($2 using decimal)) group by $1" I can get nearly the same result using sort: cat animals.txt | sort -t " " -k1,1 -k2,2nr And I can always drop into awk from there, but this all feels a bit awkward (couldn't resist) when a SQL-like language would seem to solve the problem so cleanly. I've considered writing a wrapper for SQLite that would automatically create a table based on the input data, and I've looked into using Hive in single-processor mode, but I can't help but feel this problem has been solved before. Am I missing something? Is this functionality already implemented by another standard tool? Halp!

    Read the article

  • jquery ui autocomplete with database

    - by user301766
    I fairly new to JQuery and perhaps trying to achieve something that might be abit harder for a beginner. However I am trying to create an autocomplete that sends the current value to a PHP script and then returns the necessary values. Here is my Javascript code $("#login_name").autocomplete({ source: function(request, response) { $.ajax({ url: "http://www.myhost.com/myscript.php", dataType: "jsonp", success: function(data) { alert(data); response($.map(data, function(item) { return { label: item.user_login_name, value: item.user_id } })) } }) }, minLength: 2 }); And here is the the last half of "myscript.php" while($row = $Database->fetch(MYSQLI_ASSOC)) { foreach($row as $column=>$val) { $results[$i][$column] = $val; } $i++; } print json_encode($results); Which produces the following output [{"user_id":"2","user_login_name":"Name1"},{"user_id":"3","user_login_name":"Name2"},{"user_id":"4","user_login_name":"Name3"},{"user_id":"5","user_login_name":"Name4"},{"user_id":"6","user_login_name":"Name5"},{"user_id":"7","user_login_name":"Name6"}] Can anyone tell me where I am going wrong please? Starting to get quite frustrated. The input box just turns "white" and no options are shown. The code does work if I specify an array of values.

    Read the article

  • Call to CFC via Ajax-POST does not work

    - by Philipp
    We have the following problem: A CFC-method that is called from AJAX suddenly redirects the request to cfcexplorer instead of executing the request. The strange thing is, that the problem only occurs when we make the ajax call via "POST" method, like this: // This will return the HTTP Status header: // Location: http://url.to:80/CFIDE/componentutils/cfcexplorer.cfc?method=getcfcinhtml&name=web.ajax&path=/web/ajax.cfc $.post( "http://url.to/ajax.cfc", {method: "test"}, function(res) { alert("ajax.cfc POST return:" + res); } ); Making the same request as "GET" request works perfectly: // This will call the method "test" of web/ajax.cfc $.get( "http://url.to/ajax.cfc", {method: "test"}, function(res) { alert("ajax.cfc GET return:" + res); } ); This is the ajax.cfc file (dummy file): <cfcomponent> <cffunction name="test" access="remote" returntype="Any" returnformat="JSON"> <cfset j = {}> <cfset j.data = "this is the data"> <cfreturn serializeJson(j)> </cffunction> </cfcomponent> What really puzzles us is that the request did work in the past (we have a lot of code all making ajax calls via POST and CF-code that expects FORM-data to be present, so we cannot simply change the method to GET) Maybe there was some setting that has changed or similar...

    Read the article

  • Force creation of query execution plan

    - by Marc
    I have the following situation: .net 3.5 WinForm client app accessing SQL Server 2008 Some queries returning relatively big amount of data are used quite often by a form Users are using local SQL Express and restarting their machines at least daily Other users are working remotely over slow network connections The problem is that after a restart, the first time users open this form the queries are extremely slow and take more or less 15s on a fast machine to execute. Afterwards the same queries take only 3s. Of course this comes from the fact that no data is cached and must be loaded from disk first. My question: Would it be possible to force the loading of the required data in advance into SQL Server cache? Note My first idea was to execute the queries in a background worker when the application starts, so that when the user starts the form the queries will already be cached and execute fast directly. I however don't want to load the result of the queries over to the client as some users are working remotely or have otherwise slow networks. So I thought just executing the queries from a stored procedure and putting the results into temporary tables so that nothing would be returned. Turned out that some of the result sets are using dynamic columns so I couldn't create the corresponding temp tables and thus this isn't a solution. Do you happen to have any other idea?

    Read the article

  • cURL requests changed

    - by Andriy Mytroshyn
    I've start work with cURL library, before work i compile library. i Send request and have some problem. Code in c++ that i used for work with cURL: CURL *curl=NULL; CURLcode res; struct curl_slist *headers=NULL; // init to NULL is important curl_slist_append(headers, "POST /oauth/authorize HTTP/1.1"); curl_slist_append(headers, "Host: sp-money.yandex.ru"); curl_slist_append(headers, "Content-Type: application/x-www-form-urlencoded"); curl_slist_append(headers, "charset: UTF-8"); curl_slist_append(headers, "Content-Length: 12345"); curl = curl_easy_init(); if(!curl) return 0; curl_easy_setopt(curl, CURLOPT_HTTPHEADER, headers); curl_easy_setopt(curl, CURLOPT_URL, "sp-money.yandex.ru"); curl_easy_setopt(curl, CURLOPT_PROXY, "127.0.0.1:8888"); if( curl_easy_perform(curl)!=CURLE_OK) return 1; I've used proxy, fiddler2, for check what data sent to server. When i check sent data i get result: POST HTTP://sp-money.yandex.ru/ HTTP/1.1 Host: sp-money.yandex.ru Accept: */* Connection: Keep-Alive Content-Length: 151 Content-Type: application/x-www-form-urlencoded also i check this data using Wiresharck, result the same. Do you know why in first line cURL wrote: POST HTTP://sp-money.yandex.ru/ HTTP/1.1 I send POST /oauth/authorize HTTP/1.1 I've used VS 2010 for work, and also i don't used framework

    Read the article

  • Invalidating Memcached Keys on save() in Django

    - by Zack
    I've got a view in Django that uses memcached to cache data for the more highly trafficked views that rely on a relatively static set of data. The key word is relatively: I need invalidate the memcached key for that particular URL's data when it's changed in the database. To be as clear as possible, here's the meat an' potatoes of the view (Person is a model, cache is django.core.cache.cache): def person_detail(request, slug): if request.is_ajax(): cache_key = "%s_ABOUT_%s" % settings.SITE_PREFIX, slug # Check the cache to see if we've already got this result made. json_dict = cache.get(cache_key) # Was it a cache hit? if json_dict is None: # That's a negative Ghost Rider person = get_object_or_404(Person, display = True, slug = slug) json_dict = { 'name' : person.name, 'bio' : person.bio_html, 'image' : person.image.extra_thumbnails['large'].absolute_url, } cache.set(cache_key) # json_dict will now exist, whether it's from the cache or not response = HttpResponse() response['Content-Type'] = 'text/javascript' response.write(simpljson.dumps(json_dict)) # Make sure it's all properly formatted for JS by using simplejson return response else: # This is where the fully templated response is generated What I want to do is get at that cache_key variable in it's "unformatted" form, but I'm not sure how to do this--if it can be done at all. Just in case there's already something to do this, here's what I want to do with it (this is from the Person model's hypothetical save method) def save(self): # If this is an update, the key will be cached, otherwise it won't, let's see if we can't find me try: old_self = Person.objects.get(pk=self.id) cache_key = # Voodoo magic to get that variable old_key = cache_key.format(settings.SITE_PREFIX, old_self.slug) # Generate the key currently cached cache.delete(old_key) # Hit it with both barrels of rock salt # Turns out this doesn't already exist, let's make that first request even faster by making this cache right now except DoesNotExist: # I haven't gotten to this yet. super(Person, self).save() I'm thinking about making a view class for this sorta stuff, and having functions in it like remove_cache or generate_cache since I do this sorta stuff a lot. Would that be a better idea? If so, how would I call the views in the URLconf if they're in a class?

    Read the article

  • Converting plain text in SQL to hyperlink in Access

    - by manemawanna
    Hello, I've just started a new job my first since leaving University and as part of this my first task is to convert a wholly Access 2003 database to an Access front-end, SQL back-end. The Access database consists of a series of front end forms to add or review staff data, as part of this there is hyperlinks pointing to a photograph of the employee and there CV located on a shared drive. These were saved as hyperlinks within the Access DB. I have since converted the data in the Access DB to SQL and stored it in a database for me to test on, now as part of the data conversion the photo and CV locations were converted to nvarchar from hyperlink. I've done this using SSMA. My issue now is that I need to have these text links displayed and working as hyperlinks on the front end hidden behind the words "Photo" and "CV", but am unsure as to how to go about this, as in the past I've only ever used SQL and not Access. Any help or suggestions would be appreciated and if I've not been clear in any areas please feel free to ask questions and I'll try to clear anything up for you.

    Read the article

  • "The given key was not present in the dictionary" ASP.NET error on IIS7

    - by eugeneK
    Hi, i have this error on one of my sites. Searched thought all project found no Dictionary of some kind. Read somewhere it could be caused by Url Rewrite module on IIS 7 which i'm using for certain redirects. Error appears on all pages thought the site, 99% sure only on pages that use Url Rewriting This is error's stack at System.ThrowHelper.ThrowKeyNotFoundException() at System.Collections.Generic.Dictionary`2.get_Item(TKey key) at System.Data.DataView.System.Collections.IList.get_Item(Int32 recordIndex) at System.Web.UI.WebControls.ListViewPagedDataSource.EnumeratorOnIList.get_Current() at System.Web.UI.WebControls.ListView.CreateItemsWithoutGroups(ListViewPagedDataSource dataSource, Boolean dataBinding, InsertItemPosition insertPosition, ArrayList keyArray) at System.Web.UI.WebControls.ListView.CreateChildControls(IEnumerable dataSource, Boolean dataBinding) at System.Web.UI.WebControls.ListView.PerformDataBinding(IEnumerable data) at System.Web.UI.WebControls.DataBoundControl.OnDataSourceViewSelectCallback(IEnumerable data) at System.Web.UI.WebControls.DataBoundControl.PerformSelect() at System.Web.UI.WebControls.ListView.PerformSelect() at System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() at System.Web.UI.WebControls.ListView.CreateChildControls() at System.Web.UI.Control.EnsureChildControls() at System.Web.UI.Control.PreRenderRecursiveInternal() at System.Web.UI.Control.PreRenderRecursiveInternal() at System.Web.UI.Control.PreRenderRecursiveInternal() at System.Web.UI.Control.PreRenderRecursiveInternal() at System.Web.UI.Control.PreRenderRecursiveInternal() at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)HTTP_CONNECTION:Keep-Alive HTTP_ACCEPT:image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, application/x-shockwave-flash, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, application/x-icq, / HTTP_ACCEPT_LANGUAGE:en HTTP_COOKIE:__utma=248870149.1673016949.1252234176.1276449788.1276595165.49; __utmz=248870149.1276595165.49.55.utmcsr=search|utmccn=(organic)|utmcmd=organic|utmctr=???%20??; wooTracker=C1T8MWMAZWQVHJXWROHB25SO4S0B7UO0; __utmb=248870149.6.10.1276595165; __utmc=248870149; wooTracker=C1T8MWMAZWQVHJXWROHB25SO4S0B7UO0; machine-id=87.69.44.154%3A1253914747956; wooMeta=ODAwMzkmMSYxJjc1MDE5JjEyNTUyMTQwODEwMjkmMTI1NTIxNDE1NjA0OCYmMTAwJiYzMDAyODQmJiYm; _csoot=1267959625296; _csuid=X4c1ef311c39a67; ASP.NET_SessionId=zzdn5b45uqyhw145ptqhxe20 HTTP_HOST:**** HTTP_REFERER:***** HTTP_USER_AGENT:Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; GTB6) HTTP_X_CEPT_ENCODING:gzip, deflate ***** Is anyone familiar with fix or at least where to look for one ?

    Read the article

< Previous Page | 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011  | Next Page >