Search Results

Search found 33445 results on 1338 pages for 'single instance storage'.

Page 1007/1338 | < Previous Page | 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014  | Next Page >

• Bridging 10GbE with 12.04 - bridging works but the bridging computer has no internet access

  - by Donal

  I have been trying to get 12.04 bridging working with two 10GbE cards. I have 2 10GbE cards in a linux box being used only for this bridge, 1 with 2 10GbaseT ports and another with a single CX4 port. I have 2 client computers connected with 10GbaseT cards and the CX4 card connects to a procurve switch. I can get the bridging happening mostly the way that I want, The clients receive dhcp information from the dhcp server (not the bridging machine) and can connect to and properly see the rest of the network. Speeds are ok, not amazing but working on that is another matter. My problem is that the bridging machine has no internet access ... meaning I can't update anything or apt-get anything It can ping all other machines on the local network. I've tried the helpful hints from: https://help.ubuntu.com/community/NetworkConnectionBridge "Enabling Internet Use on the Bridging Computer" and get the following RTNETLINK answers: File exists but dhclient br0 does nothing for me :( I think if it is anything it a multiple route problem as both br0 and eth4 have ipaddresses ... even though I have only set it up so that br0 has one ... Bridge setup details: /etc/network/interface auto br0 iface br0 inet static address 192.168.0.246 netmask 255.255.255.0 gateway 192.168.0.1 broadcast 192.168.0.255 dns-nameservers 192.168.0.1 dns-search example.com dns-domain example.com #(eth2 & eth3 are the 10GbaseT) #(eth4 is the CX4 connection) pre-up ip link set eth2 down pre-up ip link set eth3 down pre-up ip link set eth4 down pre-up brctl addbr br0 pre-up brctl addif br0 eth4 eth3 eth2 pre-up ip addr flush dev eth3 pre-up ip addr flush dev eth2 pre-up ip addr flush dev eth4 post-down ip link set eth4 down post-down ip link set eth2 down post-down ip link set eth3 down post-down ip link set br0 down post-down brctl delif br0 eth2 eth3 eth4 post-down brctl delbr br0 ifconfig -a br0 Link encap:Ethernet HWaddr 00:15:17:22:20:34 inet addr:192.168.0.102 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::215:17ff:fe22:2034/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4957 errors:0 dropped:0 overruns:0 frame:0 TX packets:1077 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:596320 (596.3 KB) TX bytes:139952 (139.9 KB) eth4 Link encap:Ethernet HWaddr 00:60:dd:47:7c:05 inet addr:192.168.0.57 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::260:ddff:fe47:7c05/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:9000 Metric:1 RX packets:15391 errors:0 dropped:51 overruns:0 frame:0 TX packets:1207 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:5916769 (5.9 MB) TX bytes:154312 (154.3 KB) Interrupt:70 route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth4 0.0.0.0 192.168.0.1 0.0.0.0 UG 100 0 0 br0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 br0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 br0 192.168.0.0 0.0.0.0 255.255.255.0 U 1 0 0 eth4

  Read the article

• Perl syntax error [closed]

  - by Linny

  I am a beginner taking a Perl programming course. We are trying to write a basic program for counting nucleotides in a DNA string. I'm getting syntax errors on the lines that have a single bracket on lines 28 & 70 and don't know why. It also reads that I have compilation errors. I have no idea where to start figuring that out. # The purpose of this program is to count the number of nucleotides in a strand. Each protein is counted separately # print "/n NOTE: Nucleotide counting /n"; # use strict; # enforce variable declarations use warnings; # enable compiler warnings # Display number of A,a,T,t,G,g,C,c, nucleotides in a word or sequence of letters. # my ($base) = ''; # an extracted letter from a string my ($nuceotide_count) = 0 ; # the current position within the word my ($position) = 0 ; # number of vowels in user-supplied word my ($word) = ''; # word to be processed my ($A_count) = 0 ; # of A nucleotides in the user-supplied sequence my ($a_count) = 0 ; # of A nucleotides in the user-supplied sequence my ($C_count) = 0 ; # of C nucleotides in the user-supplied sequence my ($c_count) = 0 ; # of C nucleotides in the user-supplied sequence my ($G_count) = 0 ; # of G nucleotides in the user-supplied sequence my ($g_count) = 0 ; # of G nucleotides in the user-supplied sequence my ($T_count) = 0 ; # of T nucleotides in the user-supplied sequence my ($t_count) = 0 ; # of T nucleotides in the user-supplied sequence word = (STDIN) for ($position = 0);($position if (($base eq 'a') or ($base eq 'A')) { ++$A_count; } # end if ++$position; if (($base eq 'T') or ($base eq 't')) { ++$T_count; } end if ++$position; if (($base eq 'G') or ($base eq 'g')) { ++$G_count; } # end if ++$position; if (($base eq 'C') or ($base eq 'c')) { ++$C_count; } # end if ++$position; } # end for # Display final results. # print " \n The number of A or a neucleotides is: $A_count"; print " \n The number of T or t neucleotides is: $T_count"; print " \n The number of G or g neucleotides is: $G_count"; print " \n The number of C or c neucleotides is: $C_count"; print " \n\n Program completed successfully. \n" ; exit ;

  Read the article

• Drawing lots of tiles with OpenGL, the modern way

  - by Nic

  I'm working on a small tile/sprite-based PC game with a team of people, and we're running into performance issues. The last time I used OpenGL was around 2004, so I've been teaching myself how to use the core profile, and I'm finding myself a little confused. I need to draw in the neighborhood of 250-750 48x48 tiles to the screen every frame, as well as maybe around 50 sprites. The tiles only change when a new level is loaded, and the sprites are changing all the time. Some of the tiles are made up of four 24x24 pieces, and most (but not all) of the sprites are the same size as the tiles. A lot of the tiles and sprites use alpha blending. Right now I'm doing all of this in immediate mode, which I know is a bad idea. All the same, when one of our team members tries to run it, he gets very bad frame rates (~20-30 fps), and it's much worse when there are more tiles, especially when a lot of those tiles are the kind that are cut into pieces. This all makes me think that the problem is the number of draw calls being made. I've thought of a few possible solutions to this, but I wanted to run them by some people who know what they're talking about so I don't waste my time on something stupid: TILES: When a level is loaded, draw all the tiles once into a frame buffer attached to a big honking texture, and just draw a big rectangle with that texture on it every frame. Put all the tiles into a static vertex buffer when the level is loaded, and draw them that way. I don't know if there's a way to draw objects with different textures with a single call to glDrawElements, or if this is even something I'd want to do. Maybe just put all the tiles into a big giant texture and use funny texture coordinates in the VBO? SPRITES: Draw each sprite with a separate call to glDrawElements. Use a dynamic VBO somehow. Same texture question as number 2 above. Point sprites? This is probably silly. Are any of these ideas sensible? Is there a good implementation somewhere I could look over?

  Read the article

• Is Infiniband going to get squeezed by iWARP and external QPI?

  - by andy.grover

  The Inquirer certainly thinks so.However, I'm not so sure it makes sense to compare Infiniband to an as-yet-unannounced optical external QPI. QPI is currently a processor interconnect. CPUs, RAM, and devices connected by it are conceptually part of the same machine -- they run a single OS, for example. They are both "networks" or "fabrics" but they have very different design trade-offs.Another widely-used bus in the system is closer to Infiniband than QPI -- PCI Express. Isn't it more likely that PCIe could take on IB? There are companies already who have solutions that use external PCI Express for cluster interconnect, but these have not gained significant market share. Why would QPI, a technology whose sweet spot is even further from Infiniband's than PCIe, be able to challenge Infiniband? It's hard to speculate without much information, but right now it doesn't seem likely to me.The other prediction made in the article is that Intel's 10GbE iWARP card could squeeze IB on the low end, due to its greater compatibility and lower cost.It's definitely never a good idea to bet against Ethernet when it comes to mass-market, commodity networking. Ethernet will win. 10GbE will win. But, there are now two competing ways to implement the low-latency RDMA Verbs interface on top of Ethernet. iWARP is essentially RDMA over TCP/IP over Ethernet. The new alternative is IBoE (Infiniband over Ethernet, aka RoCEE, aka "Rocky"). This encapsulates the IB packet protocol directly in the Ethernet frame. It loses the layer 3 routability of iWARP, but better maintains software compatibility with existing apps that use IB, and is simpler to implement in both software and hardware. iWARP has a substantial head start, but I believe that IBoE silicon will eventually be cheaper, and more likely to be implemented in commodity Ethernet hardware.I think IBoE is going to take low-end market share from traditional IB, but I think this is a situation IB hardware vendors have no problem accepting. Commoditized IBoE NICs invite greater use of RDMA features, and when higher performance is needed, customers can upgrade to "real" IB, maintaining IB's justification for higher prices. (IB max interconnect speeds have historically been 2-4x higher than Ethernet, and I don't see that changing.)(ObDisclosure: My current employer now sells IB hardware. I previously also worked at Intel. My opinions are my own, duh.)

  Read the article

• Understanding clojure keywords

  - by tjb1982

  I'm taking my first steps with Clojure. Otherwise, I'm somewhat competent with JavaScript, Python, Java, and a little C. I was reading this artical that describes destructuring vectors and maps. E.g. => (def point [0 0]) => (let [[x y] point] => (println "the coordinates are:" x y)) the coordinates are: 0 0 but I'm having a difficult time understanding keywords. At first glance, they seem really simple, as they just evaluate to themselves: => :test :test But they seem to be used is so many different ways and I don't understand how to think about them. E.g., you can also do stuff like this: => (defn full-name [& {first :first last :last}] => (println first last)) => (full-name :first "Tom" :last "Brennan") Tom Brennan nil This doesn't seem intuitive to me. I would have guessed the arguments should have been something more like: (full-name {:first "Tom" :last "Brennan"}) because it looks like in the function definition that you're saying "no required arguments, but a variable number of arguments comes in the form of a single map". But it seems more like you're saying "no required arguments, but a variable number of arguments comes which should be a list of alternating keywords and values... ?" I'm not really sure how to wrap my brain around this. Also, things like this confuse me too: => (def population {:humans 5 :zombies 1000}) => (:zombies population) 1000 => (population :zombies) 1000 How do maps and keywords suddenly become functions? If I could get some clarification on the use of keywords in these two examples, that would be really helpful. Update I've also seen http://stackoverflow.com/questions/3337888/clojure-named-arguments and while the accepted answer is a great demonstration of how to use keywords with destructuring and named arguments, I'm really looking more for understanding how to think about them--why the language is designed this way and how I can best internalize their use.

  Read the article

• Push-Based Events in a Services Oriented Architecture

  - by Colin Morelli

  I have come to a point, in building a services oriented architecture (on top of Thrift), that I need to expose events and allow listeners. My initial thought was, "create an EventService" to handle publishing and subscribing to events. That EventService can use whatever implementation it desires to actually distribute the events. My client automatically round-robins service requests to available service hosts which are determined using Zookeeper-based service discovery. So, I'd probably use JMS inside of EventService mainly for the purpose of persisting messages (in the event that a service host for EventService goes down before it can distribute the message to all of the available listeners). When I started considering this, I began looking into the differences between Queues and Topics. Topics unfortunately won't work for me, because (at least for now), all listeners must receive the message (even if they were down at the time the event was pushed, or hadn't made a subscription yet because they haven't completed startup (during deployment, for example) - messages should be queued until the service is available). However, I don't want EventService to be responsible for handling all of the events. I don't think it should have the code to react to events inside of it. Each of the services should do what it needs with a given event. This would indicate that each service would need a JMS connection, which questions the value of having EventService at all (as the services could individually publish and subscribe to JMS directly). However, it also couples all of the services to JMS (when I'd rather that there be a single service that's responsible for determining how to distribute events). What I had thought was to publish an event to EventService, which pulls a configuration of listeners from some configuration source (database, flat file, irrelevant for now). It replicates the message and pushes each one back into a queue with information specific to that listener (so, if there are 3 listeners, 1 event would become 3 events in JMS). Then, another thread in EventService (which is replicated, running on multiple hots) would be pulling from the queue, attempting to make the service call to the "listener", and returning the message to the queue (if the service is down), or discarding the message (if the listener completed successfully). tl;dr If I have an EventService that is responsible for receiving events and delegating service calls to "event listeners," (which are really just endpoints on other services), how should it know how to craft the service call? Should I create a generic "Event" object that is shared among all services? Then, the EventService can just construct this object and pass it to the service call. Or is there a better answer to this problem entirely?

  Read the article

• Particle System in XNA - cannot draw particle

  - by Dave Voyles

  I'm trying to implement a simple particle system in my XNA project. I'm going by RB Whitaker's tutorial, and it seems simple enough. I'm trying to draw particles within my menu screen. Below I've included the code which I think is applicable. I'm coming up with one error in my build, and it is stating that I need to create a new instance of the EmitterLocation from the particleEngine. When I hover over particleEngine.EmitterLocation = new Vector2(Mouse.GetState().X, Mouse.GetState().Y); it states that particleEngine is returning a null value. What could be causing this? /// <summary> /// Base class for screens that contain a menu of options. The user can /// move up and down to select an entry, or cancel to back out of the screen. /// </summary> abstract class MenuScreen : GameScreen ParticleEngine particleEngine; public void LoadContent(ContentManager content) { if (content == null) { content = new ContentManager(ScreenManager.Game.Services, "Content"); } base.LoadContent(); List<Texture2D> textures = new List<Texture2D>(); textures.Add(content.Load<Texture2D>(@"gfx/circle")); textures.Add(content.Load<Texture2D>(@"gfx/star")); textures.Add(content.Load<Texture2D>(@"gfx/diamond")); particleEngine = new ParticleEngine(textures, new Vector2(400, 240)); } public override void Update(GameTime gameTime, bool otherScreenHasFocus, bool coveredByOtherScreen) { base.Update(gameTime, otherScreenHasFocus, coveredByOtherScreen); // Update each nested MenuEntry object. for (int i = 0; i < menuEntries.Count; i++) { bool isSelected = IsActive && (i == selectedEntry); menuEntries[i].Update(this, isSelected, gameTime); } particleEngine.EmitterLocation = new Vector2(Mouse.GetState().X, Mouse.GetState().Y); particleEngine.Update(); } public override void Draw(GameTime gameTime) { // make sure our entries are in the right place before we draw them UpdateMenuEntryLocations(); GraphicsDevice graphics = ScreenManager.GraphicsDevice; SpriteBatch spriteBatch = ScreenManager.SpriteBatch; SpriteFont font = ScreenManager.Font; spriteBatch.Begin(); // Draw stuff logic spriteBatch.End(); particleEngine.Draw(spriteBatch); }

  Read the article

• New Worklist features on 12.1.3

  - by Vijay Shanmugam

  Following new Worklist features are available on E-Business Suite 12.1.3 via Patch 13646173. Ability to view comments on top of a notification If an action is performed on a notification such as Reassign, Request for Information or Provide Information, the recipient of the notification will see who performed the last action and the associated comment on top of the notification. Reassigning a request for information notification If an approver requests more information on a notification from it's submitter, the submitter now has two options Answer Request for More Information Transfer Request for More Information If the submitter thinks the requested information can be provided by another user, he/she can transfer the request to the other user. Please note that only Transfer is supported for Request for More Information. Once transferred, the submitter cannot access the notification and provide the requested information. Use actual sent date when reassigning a notification The Sent field in notification header always showed the date on which the notification was first created. If the notification was later reassigned, the Sent date was not updated to show the last action date. This caused problems in following scenario Approval notification was sent to JACK on 01-JAN-2012 JACK waited for 10 days before reassigning to JILL on 10-JAN-2012 JILL does not see the notification as sent on 10-JAN-2012, instead sees it as sent on 01-JAN-2012 Although the notification was originally created on 01-JAN-2012, it was sent to JILL only on 10-JAN-2012 The enhancement now shows the correct sent date in Worklist and Notification Details page. Figure 1 - Depicts all the above 3 features Related Action History for response required notification So far it was possible to embed Action History of an response-required notification into another FYI notification using #RELATED_HISTORY attribute (Please refer to Workflow Developer Guide for details about this attribute). The enhancement now enables developers to embed Action History of one response-required notification into another response-required notification. To embed Action History of one response-required notification into another, create message attribute #RELATED_HISTORY. To this attribute set a value during run-time in the following format. {TITLE}[ITEM_TYPE:ITEM_KEY]PROCESS_NAME:ACTIVITY_LABEL_NAMEThe TITLE, ITEM_TYPE and ITEM_KEY are optional values. TITLE is used as Related Action History header title. If TITLE is not present, then a default title "Related Action History" is shown. If ITEM_TYPE is present and ITEM_KEY is not, For Example: {TITLE}[ITEM_TYPE]PROCESS_NAME:ACTIVITY_LABEL_NAME , the Related Action History is populated from parent item type of the current item. If both ITEM_TYPE and ITEM_KEY is present, For Example: {TITLE}[ITEM_TYPE:ITEM_KEY]PROCESS_NAME:ACTIVITY_LABEL_NAME , the Related Action History is populated from that specific instance activity. Figure 2 - Depicts Related Action History feature

  Read the article

• Actor and Sprite, who should own these properties?

  - by Gerardo Marset

  I'm writing sort of a 2D game engine for making the process of creating games easier. It has two classes, Actor and Sprite. Actor is used for interactive elements (the player, enemies, bullets, a menu, an invisible instance that controls score, etc) and Sprite is used for animated (or not) images with transparency (or not). The actor may have an assigned sprite that represents it on the screen, which may change during the game. E.g. in a top-down action game you may have an actor with a sprite of a little guy that changes when attacking, walking, and facing different directions, etc. Currently the actor has x and y properties (its coordinates in the screen), while the sprite has an index property (the number of the frame currently being shown by the sprite). Since the sprite doesn't know which actor it belongs to (or if it belongs to an actor at all), the actor must pass its x and y coordinates when drawing the sprite. Also, since a actors may reset its sprite each frame (and usually do), the sprite's index property must be passed from the old to the new sprite like so (pseudocode): function change_sprite(new_sprite) old_index = my.sprite.index my.sprite = new_sprite() my.sprite.index = old_index % my.sprite.frames end I always thought this was kind of cumbersome, but it never was a big problem. Now I decided to add support for more properties. Namely a property to draw the sprite rotated, a property to draw it flipped, it a property draw it stretched, etc. These should probably belong to the sprite and not the actor, but if they do, the actor would have to pass them from the old to the new sprite each time it changes... On the other hand, if they belonged to the actor, the actor would have to pass each property to the sprite when drawing it (since the sprite doesn't know which actor it belongs to, and it shouldn't, since sprites aren't just meant to be used by actors, really). Another option I thought of would be having an extra class that owns all these properties (plus index, x and y) and links an actor with a sprite, but that doesn't come without drawbacks. So, what should I do with all these properties? Thanks!

  Read the article

• A brief note for customers running SOA Suite on AIX platforms

  - by christian

  When running Oracle SOA Suite with IBM JVMs on the AIX platform, we have seen performance slowdowns and/or memory leaks. On occasion, we have even encountered some OutOfMemoryError conditions and the concomittant Java coredump. If you are experiencing this issue, the resolution may be to configure -Dsun.reflect.inflationThreshold=0 in your JVM startup parameters. https://www.ibm.com/developerworks/java/library/j-nativememory-aix/ contains a detailed discussion of the IBM AIX JVM memory model, but I will summarize my interpretation and understanding of it in the context of SOA Suite, below. Java ClassLoaders on IBM JVMs are allocated a native memory area into which they are anticipated to map such things as jars loaded from the filesystem. This is an excellent memory optimization, as the file can be loaded into memory once and then shared amongst many JVMs on the same host, allowing for excellent horizontal scalability on AIX hosts. However, Java ClassLoaders are not used exclusively for loading files from disk. A performance optimization by the Oracle Java language developers enables reflectively accessed data to optimize from a JNI call into Java bytecodes which are then amenable to hotspot optimizations, amongst other things. This performance optimization is called inflation, and it is executed by generating a sun.reflect.DelegatingClassLoader instance dynamically to inject the Java bytecode into the virtual machine. It is generally considered an excellent optimization. However, it interacts very negatively with the native memory area allocated by the IBM JVM, effectively locking out memory that could otherwise be used by the Java process. SOA Suite and WebLogic are both very large users of reflection code. They reflectively use many code paths in their operation, generating lots of DelegatingClassLoaders in normal operation. The IBM JVM slowdown and subsequent OutOfMemoryError are as a direct result of the Java memory consumed by the DelegatingClassLoader instances generated by SOA Suite and WebLogic. Java garbage collection runs more frequently to try and keep memory available, until it can no longer do so and throws OutOfMemoryError. The setting sun.reflect.inflationThreshold=0 disables this optimization entirely, never allowing the JVM to generate the optimized reflection code. IBM JVMs are susceptible to this issue primarily because all Java ClassLoaders have this native memory allocation, which is shared with the regular Java heap. Oracle JVMs don't automatically give all ClassLoaders a native memory area, and my understanding is that jar files are never mapped completely from shared memory in the same way as IBM does it. This results in different behaviour characteristics on IBM vs Oracle JVMs.

  Read the article

• Issues with shooting in a HTML5 platformer game

  - by fnx

  I'm coding a 2D sidescroller using only JavaScript and HTML5 canvas, and in my game I have two problems with shooting: 1) Player shoots continous stream of bullets. I want that player can shoot only a single bullet even though the shoot-button is being held down. 2) Also, I get an error "Uncaught TypeError: Cannot call method 'draw' of undefined" when all the bullets are removed. My shooting code goes like this: When player shoots, I do game.bullets.push(new Bullet(this, this.scale)); and after that: function Bullet(source, dir) { this.id = "bullet"; this.width = 10; this.height = 3; this.dir = dir; if (this.dir == 1) { this.x = source.x + source.width - 5; this.y = source.y + 16; } if (this.dir == -1) { this.x = source.x; this.y = source.y + 16; } } Bullet.prototype.update = function() { if (this.dir == 1) this.x += 8; if (this.dir == -1) this.x -= 8; for (var i in game.enemies) { checkCollisions(this, game.enemies[i]); } // Check if bullet leaves the viewport if (this.x < game.viewX * 32 || this.x > (game.viewX + game.tilesX) * 32) { removeFromList(game.bullets, this); } } Bullet.prototype.draw = function() { // bullet flipping uses orientation of the player var posX = game.player.scale == 1 ? this.x : (this.x + this.width) * -1; game.ctx.scale(game.player.scale, 1); game.ctx.drawImage(gameData.getGfx("bullet"), posX, this.y); } I handle removing with this function: function removeFromList(list, object) { for (i in list) { if (object == list[i]) { list.splice(i, 1); break; } } } And finally, in the main game loop I have this: for (var i in game.bullets) { game.bullets[i].update(); game.bullets[i].draw(); } I have tried adding if (game.bullets.length > 0) to the main game loop before the above draw&update calls, but I still get the same error.

  Read the article

• WebLogic Server 11gR1 Interactive Quick Reference

  - by JuergenKress

  The WebLogic Server 11gR1 Administration interactive quick reference is a multimedia tool for various terms and concepts used in WebLogic Server architecture. This tool is available for administrators for online or offline use. This is built as a multimedia web page which provides descriptions of WebLogic Server Architectural components, and references to relevant documentation. This tool offers valuable reference information for any complex concept or product in an intuitive and useful manner. Each interactive type presents data that may be available in the documentation (in the case of Oracle products), but presents it in a way that is more intuitive and useful to a user of Oracle products because it displays data the way it is used in a real world, best practice scenario. For example, the architectural diagram interactive type provides an image of an architectural diagram that is typically larger than a single slide or paper. The image is scrollable and provides zoom capabilities to easily and clearly view any part of the image. The image itself contains a hotspot map that you can click to get more information about a feature, including reference links to the documentation in question. Linking the visual image of the component and where it fits in the overall architecture of the product, or technology in use, to the technical explanation and how-to materials related to that component is something not offered by the documentation. In a future release, the poster will also enable you to drill down even further into the individual subsystems in nested diagrams to look at the details of that subsystem. In short, the interactive posters are good at showing you the big picture, then quickly and easily getting you to the detailed information you need. In an instant, you can see where a technical component fits into an overall architecture, and zero in on the nitty-gritty details that show you how to do it yourself. Note: This is a first initial release with more features in development. Currently known information: Only Firefox 8.0 and higher is known to work with this product. This product may work with Chrome and Safari browsers, but is known to have issues in Internet Explorer at this time. Smartphones, such as iPads and iPhones, are partially supported WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. BlogTwitterLinkedInMixForumWiki Technorati Tags: WebLogic server quick reference,weblogic overview,weblogic 12c,WebLogic Community,Oracle,OPN,Jürgen Kress

  Read the article

• Layout of mathematical views (iOS)

  - by William Jockusch

  I am trying to figure out the right way to encapsulate graphical information about mathematical objects. It is not simple. For example, a matrix can include square brackets around its entries, or not. Some things carry down to sub-objects -- for example, a matrix might track the font size to be used by its entries. Similarly, the font color and the background color would carry down to the entries. Other things do not carry down. For example, the entries of the matrix do not need to know whether or not the matrix has those square brackets. Based on all of the above, I need to calculate sizes for everything, then frames. All of this can depend on the properties stored above. The size of a matrix depends on the sizes of its entries, and also on whether or not it has those brackets. What I am having a hard time with is not the individual ways to calculate sensible frames for this or that. It is the overall organizational structure of the whole thing. How can I keep track of it all without going crazy. One particular obstacle is worth mentioning -- for reasons I don't want to go into here, I need to calculate the sizes and frames for everything before I instantiate any actual views. So, for example, if I have a Matrix object, I need to calculate its size before I make a MatrixView. If I have an equation, I need to calculate the size of the view for the equation before I create the actual view. So I clearly need separate objects for those calculations. But I can't figure out a sensible class structure for those objects. If I put them all into a single class, I get some advantages because copying then becomes easy. But I also end up with a bloated class that contains info that is irrelevant for some objects -- such as whether or not to include those brackets around the matrix. But if I use a lot of different classes, copying properties becomes a real pain. If it matters, this is all in Objective C, for an iOS environment. Any pointers would be greatly appreciated.

  Read the article

• SQL: empty string vs NULL value

  - by Jacek Prucia

  I know this subject is a bit controversial and there are a lot of various articles/opinions floating around the internet. Unfortunatelly, most of them assume the person doesn't know what the difference between NULL and empty string is. So they tell stories about surprising results with joins/aggregates and generally do a bit more advanced SQL lessons. By doing this, they absolutely miss the whole point and are therefore useless for me. So hopefully this question and all answers will move subject a bit forward. Let's suppose I have a table with personal information (name, birth, etc) where one of the columns is an email address with varchar type. We assume that for some reason some people might not want to provide an email address. When inserting such data (without email) into the table, there are two available choices: set cell to NULL or set it to empty string (''). Let's assume that I'm aware of all the technical implications of choosing one solution over another and I can create correct SQL queries for either scenario. The problem is even when both values differ on the technical level, they are exactly the same on logical level. After looking at NULL and '' I came to a single conclusion: I don't know email address of the guy. Also no matter how hard i tried, I was not able to sent an e-mail using either NULL or empty string, so apparently most SMTP servers out there agree with my logic. So i tend to use NULL where i don't know the value and consider empty string a bad thing. After some intense discussions with colleagues i came with two questions: am I right in assuming that using empty string for an unknown value is causing a database to "lie" about the facts? To be more precise: using SQL's idea of what is value and what is not, I might come to conclusion: we have e-mail address, just by finding out it is not null. But then later on, when trying to send e-mail I'll come to contradictory conclusion: no, we don't have e-mail address, that @!#$ Database must have been lying! Is there any logical scenario in which an empty string '' could be such a good carrier of important information (besides value and no value), which would be troublesome/inefficient to store by any other way (like additional column). I've seen many posts claiming that sometimes it's good to use empty string along with real values and NULLs, but so far haven't seen a scenario that would be logical (in terms of SQL/DB design). P.S. Some people will be tempted to answer, that it is just a matter of personal taste. I don't agree. To me it is a design decision with important consequences. So i'd like to see answers where opion about this is backed by some logical and/or technical reasons.

  Read the article

• Why is my laptop so sluggish? Or Damn You Facebook and Twitter! Or All Hail Chrome!

  - by John Conwell

  In the past three weeks, I've noticed that my laptop (dual core 2.1GHz, 2Gb RAM) has become amazingly sluggish.  I only uses for communications and data lookup workflows, so the slowness was tolerable.  But today I finally got fed up with the suckyness and decided to get to the root of the problem (I do have strong performance roots after all). It actually didn't take all that long to figure it out.  About a year ago I converted to Google Chrome (away from FireFox).  One of the great tools Chrome has is a "Task Manager" tool, that gives you Windows Task Manager like details for all the tabs open in the browser (Shift + Esc).  Since every tab runs in its own process, its easy from Task Manager (both Windows or Chrome) to identify and kill a single performance offending tab.  This is unlike IE, where you only get aggregate data about all tabs open.  Anyway, I digress.  Today my laptop sucked.  Windows Task Manager told me that I had two memory hogging Chrome tabs, but couldn't tell me which web page those tabs are showing.  Enter Chrome Task Manager which tells you the page title, along with CPU, memory and network utilization of each tab.  Enter my amazement.  Turns out Facebook was using just shy of half a Gb of RAM.  Half a Gigabyte!  That's 512 Megabytes!524,288 Kilobytes! 536,870,912 Bytes!  Or 4,294,967,296 Bits!  In other words, that's a frackin boat load of memory.  Now consider that Facebook is running on pretty much 96.3% (statistics based on absolutely nothing) of every house hold desktop, laptop, netbook, and mobile device in America, that is pretty horrific! And I wasn't playing any Facebook games like FarmWars or MafiaVille.  I just had my normal, default home page up showing me who just had breakfast, or just got finished with their morning run. I'm sorry...let me say that again...HALF A GIG OF RAM!  That is just unforgivable. I can just see my mom calling me up:  Mom: "John...I think I need a new computer.  Mine is really slow these days" John: "What do you have running?" Mom: "Oh, just Facebook" John: "Ok, close Facebook and tell me how fast your computer feels" Mom: "Well...I don't know how fast it is.  All I do is use Facebook" John: "Ok Mom, I'll send you a new computer by Tuesday" Oh yea...and the other offending web page?  It was Twitter, using a quarter of a Gigabyte. God I love social networks!

  Read the article

• Size doesn't matter

  - by ssoolsma

  Whenever I start a new project I *always* break up my code in different projects. Also known as n-tier solution. The scale of  the project doesn't matter, but make sure that each project is responsible for himself (or herself if you prefer). I make sure that i ....At least thought about how the project should work on the toilet or in a project team meeting.Have a solution directory and create my projects within. I like to name my project (and it's folders by the namespaces). For instance: When i'm creating a piece of (web)software called: ChuckNorris, i always include the software name in my projects. Start off with designing the DataAccess project. I name it: ChuckNorris.DataAccess which lets me easily identify the project incase the project scales alot.Build the classes which represent the database structure. Don't stop working on a class untill it's finished for now. Also, don't over-do the methods. Build stuff only when it's needed, and not think: "Hm, that would be cool to have". Cause most of the time you end up with unused code, and we don't want that.Build a unittest project and make sure you create the folder inside the project that it's testing. So, create the ChuckNorris.DataAccess.UnitTest project inside the folder of the dataaccess project. I would suggest using the nUnit testframework.Incase you though, hm i skip unittest: Don't! Just build it - it will safe you alot of time later onNow, read 5 again. Build that bloody unittest. Don't skip. (i cant emphasize this enough)Now, every class in the dataaccess project is responsible for itself. They don't rely on each other. This is where we use the BusinessLogic project for. Start creating the ChuckNorris.BusinessLogic project. (not inside the data-access project ofcourse, but withing the ChuckNorris folder.Combine stuff from data-access. This usual involves alot of copying the data-access classes and feels silly at first. (we'll get to that later on)Now you come up to a point of creating a service project. You might not always see why to use it, but see it as a way to expose your businesslogic to any application (including your own). Sometimes i use it as a so-called "Factory". Every call goes through this factory, so that's the only thing i'm exposing to any program, and make sure that those methods are the only ones that I allow you to invoke.Build any UI (website, phoneapp, forms application, silverlight, wpf or whatever) and reference it to you service project. Fall in love (cough) with this approach.It's possible that it doesn't seem to make much sense, and very incomplete. Well, that last part is correct. Next post will go in to detail of setting up your Data-Access project and use the entity framework.

  Read the article

• Why would you dual-run an app on Azure and AWS?

  - by Elton Stoneman

  Originally posted on: http://geekswithblogs.net/EltonStoneman/archive/2013/11/10/why-would-you-dual-run-an-app-on-azure-and-aws.aspxI had this question from a viewer of my Pluralsight course, Implementing the Reactive Manifesto with Azure and AWS, and thought I’d publish the response. So why would you dual-run your cloud app by hosting it on Azure and AWS? Sounds like a lot of extra development and management overhead. Well the most compelling reasons are reliability and portability. In 2012 I was working for a client who was making a big investment in the cloud, and at the end of the year we published their first external API for business partners. It was hosted in Azure and used some really nice features to route back into existing on-premise services. We were able to publish a clean, simple API to partners, and hide away the underlying complexity of the internal services while still leveraging them to do all the work. Two days after we went live, we were hit by the Azure SSL certificate expiry outage, and our API was unavailable for the best part of 3 days. Fortunately we had planned a gradual roll-out to partners, so the impact was minimal, but we’d been intending to ramp up quickly, and if the outage had happened a week or two later we would have been in a very bad place. Not least because our app could only run on Azure, we couldn’t package it up for another service without going back and reworking the code. More recently AWS had an issue with a networking device in one of their data centres which caused an outage that took the best part of a day to resolve. In both scenarios the SLAs are worthless, as you’ll get back a small percentage of your cloud expenditure, which is going to be negligible compared to your costs in dealing with the outage. And if your app is built specifically for AWS or Azure then if there’s an extended outage you can’t just deploy it onto a new set of kit from a different supplier. And the chances are pretty good there will be another extended outage, both for Microsoft and for Amazon. But the chances are small that it will happen to both at the same time. So my basic guidance has been: ignore the SLAs, go for better uptime by using two clouds. As soon as you need to scale beyond a single instance, start by scaling out to another cloud. Then scale out to different data centres in both clouds. Then you’ve got dual-cloud, quadruple-datacentre redundancy, so any more scaling you need can be left to the clouds to auto-scale themselves. By running in both clouds, you’ve made your app portable, so in the highly unlikely event that both AWS and Azure go down in multiple regions, you’ll have a deployment package which will let you spin up a new stack on yet another cloud, without having to rework your solution.

  Read the article

• Why would more CPU cores on virtual machine slow compile times?

  - by Sid

  [edit#2] If anyone from VMWare can hit me up with a copy of VMWare Fusion, I'd be more than happy to do the same as a VirtualBox vs VMWare comparison. Somehow I suspect the VMWare hypervisor will be better tuned for hyperthreading (see my answer too) I'm seeing something curious. As I increase the number of cores on my Windows 7 x64 virtual machine, the overall compile time increases instead of decreasing. Compiling is usually very well suited for parallel processing as in the middle part (post dependency mapping) you can simply call a compiler instance on each of your .c/.cpp/.cs/whatever file to build partial objects for the linker to take over. So I would have imagined that compiling would actually scale very well with # of cores. But what I'm seeing is: 8 cores: 1.89 sec 4 cores: 1.33 sec 2 cores: 1.24 sec 1 core: 1.15 sec Is this simply a design artifact due to a particular vendor's hypervisor implementation (type2:virtualbox in my case) or something more pervasive across more VMs to make hypervisor implementations more simpler? With so many factors, I seem to be able to make arguments both for and against this behavior - so if someone knows more about this than me, I'd be curious to read your answer. Thanks Sid [edit:addressing comments] @MartinBeckett: Cold compiles were discarded. @MonsterTruck: Couldn't find an opensource project to compile directly. Would be great but can't screwup my dev env right now. @Mr Lister, @philosodad: Have 8 hw threads, using VirtualBox, so should be 1:1 mapping without emulation @Thorbjorn: I have 6.5GB for the VM and a smallish VS2012 project - it's quite unlikely that I'm swapping in/out trashing the page file. @All: If someone can point to an open source VS2010/VS2012 project, that might be a better community reference than my (proprietary) VS2012 project. Orchard and DNN seem to need environment tweaking to compile in VS2012. I really would like to see if someone with VMWare Fusion also sees this (for VMWare vs VirtualBox compartmentalization) Test details: Hardware: Macbook Pro Retina CPU : Core i7 @ 2.3Ghz (quad core, hyper threaded = 8 cores in windows task manager) Memory : 16 GB Disk : 256GB SSD Host OS: Mac OS X 10.8 VM type: VirtualBox 4.1.18 (type 2 hypervisor) Guest OS: Windows 7 x64 SP1 Compiler: VS2012 compiling a solution with 3 C# Azure projects Compile times measure by VS2012 plugin called 'VSCommands' All tests run 5 times, first 2 runs discarded, last 3 averaged

  Read the article

• Emaroo 1.4.0 Released

  - by WeigeltRo

  Emaroo is a free utility for browsing most recently used (MRU) lists of various applications. Quickly open files, jump to their folder in Windows Explorer, copy their path - all with just a few keystrokes or mouse clicks. tl;dr: Emaroo 1.4.0 is out, go download it on www.roland-weigelt.de/emaroo   Why Emaroo? Let me give you a few examples. Let’s assume you have pinned Emaroo to the first spot on the task bar so you can start it by hitting Win+1. To start one of the most recently used Visual Studio solutions you type Win+1, [maybe arrow key down a few times], Enter This means that you can start the most recent solution simply by Win+1, Enter What else? If you want to open an Explorer window at the file location of the solution, you type Ctrl+E instead of Enter.   If you know that the solution contains “foo” in its name, you can type “foo” to filter the list. Because this is not a general purpose search like e.g. the Search charm, but instead operates only on the MRU list of a single application, you usually have to type only a few characters until you can press Enter or Ctrl+E.   Ctrl+C copies the file path of the selected MRU item, Ctrl+Shift+C copies the directory If you have several versions of Visual Studio installed, the context menu lets you open a solution in a higher version.   Using the context menu, you can open a Visual Studio solution in Blend. So far I have only mentioned Visual Studio, but Emaroo knows about other applications, too. It remembers the last application you used, you can change between applications with the left/right arrow or accelerator keys. Press F1 or click the Emaroo icon (the tab to the right) for a quick reference. Which applications does Emaroo know about? Emaroo knows the MRU lists of Visual Studio 2008/2010/2012/2013 Expression Blend 4, Blend for Visual Studio 2012, Blend for Visual Studio 2013 Microsoft Word 2007/2010/2013 Microsoft Excel 2007/2010/2013 Microsoft PowerPoint 2007/2010/2013 Photoshop CS6 IrfanView (most recently used directories) Windows Explorer (directories most recently typed into the address bar) Applications that are not installed aren’t shown, of course. Where can I download it? On the Emaroo website: www.roland-weigelt.de/emaroo Have fun!

  Read the article

• Is it evil to model JSON responses to classes when they are mostly smilar?

  - by Aybe

  Here's the problem : While implementing a C# wrapper for an online API (Discogs) I've been faced to a dilemma : quite often the responses returned have mostly similar members and while modeling these responses to classes, some questions surfaces on which way to go would be the best. Example : Querying for a 'release' or a 'master' will return an object that contains an array of 'artist', however these 'artists' do not exactly have the same members. Currently I decided to represent these 'artists' as a single 'Artist' class, against having respective 'ReleaseArtist' and 'MasterArtist' classes which soon becomes very confusing even though another problem arises : when a category (master or release) does not return these members, they will be null. Though it might sound confusing as well I find it less confusing than the former situation as I've tackled the problem by simply not showing null members when visualizing these objects. Is this the right approach to follow ? An example of these differences : public class Artist { public List<Alias> Aliases { get; set; } public string DataQuality { get; set; } public List<Image> Images { get; set; } public string Name { get; set; } public List<string> NameVariations { get; set; } public string Profile { get; set; } public string Realname { get; set; } public string ReleasesUrl { get; set; } public string ResourceUrl { get; set; } public string Uri { get; set; } public List<string> Urls { get; set; } } public class ReleaseArtist { public string Join { get; set; } public string Name { get; set; } public string Anv { get; set; } public string Tracks { get; set; } public string Role { get; set; } public string ResourceUrl { get; set; } public int Id { get; set; } }

  Read the article

• Releasing the new Sample Browser Phone app

  - by Jialiang

  Originally posted on: http://geekswithblogs.net/Jialiang/archive/2014/06/05/releasing-the-new-sample-browser-phone-app.aspx Starting its journey in 2010, Sample Browser is achieving its tetralogy by releasing a Windows Phone version Sample Browser today. The new Windows Phone app is the fourth milestone of Sample Browser since we released the desktop version and the Visual Studio version in 2012 and the Windows Store version in 2013. This time, by providing a sample browser designed for a ‘walking’ platform in response to MVPs’ suggestions during last year’s MVP Global Summit, we are literally putting a world of code samples "at developers’ fingertips”. If you like to have a code gallery of over 7000 quality code samples in your pocket, then click here to download our Windows Phone Sample Browser and start a fantastic mobile experience. With Windows Phone version Sample Browser and the Internet, you can search for code samples on MSDN at anytime and anywhere you want, 24/7 and–even to bed. You can also check code sample details and share them with your friends. Compared to the other 3 pieces in the tetralogy (desktop version, Visual Studio version, and the Windows Store version), the Windows Phone version Sample Browser sells itself for convenience and instant connectivity. For those who need to reach code samples under mobile circumstances where no PCs is available, Windows Phone version Sample Browser will definitely be the right service you are seeking for. Aside from sharing samples via emails as the other 3 do, the Windows Phone version Sample Browser also allows you to share the sample via SMS and Near Field Communication (NFC).   What's Next Currently, the Windows Phone Sample Browser only supports online MSDN code searching, but we already plan to upgrade Sample Browser to allow users to do ‘Bing code search’, and add and manage their private code snippets.  We will also upgrade the app to universal app. Universal App is a new concept brought up in the Microsoft Build Developer Conference 2014. It is a new development model that allows for a single app to be deployed across multiple Windows devices such as Windows Phone, Windows 8.1, and XBox. Therefore, once we finish upgrading Sample Browser to a universal app, you can synchronize your own code snippets across different devices; You can also mark a code sample as favorite on your Windows Phone and continue to study the sample when you are on your desktop. By then, sharing data between platforms will be a piece of cake. Also, the user experience of Sample Browser on different platforms will be more consistent.  The best is yet to come!   We sincerely suggest you give Sample Browser a try (click here to download). If you love what you see in Sample Browser, please recommend it to your friends and colleagues. If you encounter any problems or have any suggestions for us, please contact us at [email protected]. Your precious opinions and comments are more than welcome.

  Read the article

• Creating a voxel chunk with a VBO - How to translate the coordinates of each block and add it to the VBO chunk?

  - by sunsunsunsunsun

  Im trying to make a voxel engine similar to minecraft as a little learning experience and a way to learn some opengl. I have created a chunk class and I want to put all of the vertices for the whole chunk into a single VBO. I was previously only putting each block into a vbo and making a call to render each block. Anyways, I am a bit confused about how I can translate the coordinates of each block in the chunk when I'm putting all vertices into one vbo. This is what I have at the moment. public void putVertices(float tx, float ty, float tz) { float l_length = 1.0f; float l_height = 1.0f; float l_width = 1.0f; vertexPositionData.put(new float[]{ xOffset + l_length + tx, l_height + ty, zOffset + -l_width + tz, xOffset + -l_length + tx, l_height + ty, zOffset + -l_width + tz, xOffset + -l_length + tx, l_height + ty, zOffset + l_width + tz, xOffset + l_length + tx, l_height + ty, zOffset + l_width + tz, xOffset + l_length + tx, -l_height + ty, zOffset + l_width + tz, xOffset + -l_length + tx, -l_height + ty, zOffset + l_width + tz, xOffset + -l_length + tx, -l_height + ty, zOffset + -l_width + tz, xOffset + l_length + tx, -l_height + ty, zOffset + -l_width + tz, xOffset + l_length + tx, l_height + ty, zOffset + l_width + tz, xOffset + -l_length + tx, l_height + ty,zOffset + l_width + tz, xOffset + -l_length + tx, -l_height + ty,zOffset + l_width + tz, xOffset + l_length + tx, -l_height + ty, zOffset + l_width + tz, xOffset + l_length + tx, -l_height + ty, zOffset + -l_width + tz, xOffset + -l_length + tx, -l_height + ty,zOffset + -l_width + tz, xOffset + -l_length + tx, l_height + ty, zOffset + -l_width + tz, xOffset + l_length + tx, l_height + ty, zOffset + -l_width + tz, xOffset + -l_length + tx, l_height + ty, zOffset + l_width + tz, xOffset + -l_length + tx, l_height + ty, zOffset + -l_width + tz, xOffset + -l_length + tx, -l_height + ty, zOffset + -l_width + tz, xOffset + -l_length + tx, -l_height + ty,zOffset + l_width + tz, xOffset + l_length + tx, l_height + ty,zOffset + -l_width + tz, xOffset + l_length + tx, l_height + ty, zOffset + l_width + tz, xOffset + l_length + tx, -l_height + ty, zOffset + l_width + tz, xOffset + l_length + tx, -l_height + ty, zOffset + -l_width + tz }); } public void createChunk() { vertexPositionData = BufferUtils.createFloatBuffer((24*3)*activateBlocks); Random random = new Random(); for (int x = 0; x < CHUNK_SIZE; x++) { for (int y = 0; y < CHUNK_SIZE; y++) { for (int z = 0; z < CHUNK_SIZE; z++) { if(blocks[x][y][z].getActive()) { putVertices(x*2.0f, y*2.0f, z*2.0f); } } } } Whats any easy way to translate the vertices of each block into its correct position? I was previously using glTranslatef with each call to render block but this wont work now. What I am doing now also does not work, the blocks all render in stacks on top of each other and it looks like this: http://i.imgur.com/NyFtBTI.png Thanks

  Read the article

• Exalogic 2.0.1 Tea Break Snippets - Creating and using Distribution Groups

  - by The Old Toxophilist

  By default running your Exalogic in a Virtual provides you with, what to Cloud Users, is a single large resource and they can just create vServers and not care about how they are laid down on the the underlying infrastructure. All the Cloud Users will know is that they can create vServers. For example if we have a Quarter Rack (8 Nodes) and our Cloud User creates 8 vServers those 8 vServers may run on 8 distinct nodes or may all run on the same node. Although in many cases we, as Cloud Users, may not be to worried how the Virtualisation Algorithm decides where to place our vServers there are cases where it is extremely important that vServers run on distinct physical compute nodes. For example if we have a Weblogic Cluster we will want the Servers with in the cluster to run on distinct physical node to cover for the situation where one physical node is lost. To achieve this the Exalogic Virtualised implementation provides Distribution Groups that define and anti-aliasing policy that the underlying Virtualisation Algorithm will take into account when placing vServers. It should be noted that Distribution Groups must be created before you create vServers because a vServer can only be added to a Distribution Group at creation time. Creating A Distribution Group To create a Distribution Groups we will first need to select the Account in which we want the Distribution Group to be created. Once we have selected the account we will see the Interface update and Account specific Actions will be displayed within the Action Panes. From the Action pane (or Right-Click on the Account) select the "Create Distribution Group" action. This will initiate the create wizard as follows. Distribution Group Details Within the first Step of the Wizard we can specify the name of the distribution group and this should be unique. In addition we can provide a detailed description of the group. Distribution Group Configuration The second step of the configuration wizard allows you to specify the number of elements that are required within this group and will specify a maximum of the number of nodes within you Exalogic. At this point it is always better to specify a group with spare capacity allowing for future expansion. As vServers are added to group the available slots decrease. Summary Finally the last step of the wizard display a summary of the information entered.

  Read the article

• Download files from a SharePoint site using the RSSBus SSIS Components

  - by dataintegration

  In this article we will show how to use a stored procedure included in the RSSBus SSIS Components for SharePoint to download files from SharePoint. While the article uses the RSSBus SSIS Components for SharePoint, the same process will work for any of our SSIS Components. Step 1: Open Visual Studio and create a new Integration Services Project. Step 2: Add a new Data Flow Task to the Control Flow screen and open the Data Flow Task. Step 3: Add an RSSBus SharePoint Source to the Data Flow Task. Step 4: In the RSSBus SharePoint Source, add a new Connection Manager, and add your credentials for the SharePoint site. Step 5: Now from the Table or View dropdown, choose the name of the Document Library that you are going to back up and close the wizard. Step 6: Add a Script Component to the Data Flow Task and drag an output arrow from the 'RSSBus SharePoint Source' to it. Step 7: Open the Script Component, go to edit the Input Columns, and choose all the columns. Step 8: This will open a new Visual Studio instance, with a project in it. In this project add a reference to the RSSBus.SSIS2008.SharePoint assembly available in the RSSBus SSIS Components for SharePoint installation directory. Step 9: In the 'ScriptMain' class, add the System.Data.RSSBus.SharePoint namespace and go to the 'Input0_ProcessInputRow' method (this method's name may vary depending on the input name in the Script Component). Step 10: In the 'Input0_ProcessInputRow' method, you can add code to use the DownloadDocument stored procedure. Below we show the sample code: String connString = "Offline=False;Password=PASSWORD;User=USER;URL=SHAREPOINT-SITE"; String downloadDir = "C:\\Documents\\"; SharePointConnection conn = new SharePointConnection(connString); SharePointCommand comm = new SharePointCommand("DownloadDocument", conn); comm.CommandType = CommandType.StoredProcedure; comm.Parameters.Clear(); String file = downloadDir+Row.LinkFilenameNoMenu.ToString(); comm.Parameters.Add(new SharePointParameter("@File", file)); String list = Row.ServerUrl.ToString().Split('/')[1].ToString(); comm.Parameters.Add(new SharePointParameter("@Library", list)); String remoteFile = Row.LinkFilenameNoMenu.ToString(); comm.Parameters.Add(new SharePointParameter("@RemoteFile", remoteFile)); comm.ExecuteNonQuery(); After saving your changes to the Script Component, you can execute the project and find the downloaded files in the download directory. SSIS Sample Project To help you with getting started using the SharePoint Data Provider within SQL Server SSIS, download the fully functional sample package. You will also need the SharePoint SSIS Connector to make the connection. You can download a free trial here. Note: Before running the demo, you will need to change your connection details in both the 'Script Component' code and the 'Connection Manager'.

  Read the article

• Design pattern to handle queries using multiple models

  - by coderkane

  I am presented with a dilemma while trying to re-designing the class structure for my PHP/MySQL application to make it more elegant and conform it to the SOLID principle. The problem goes like this: Let as assume, there is an abstract class called person which has certain properties to define a generic person, such as name, age, date of birth etc. There are two classes, student, and teacher, that implements this abstract class. They add their own unique properties to it. I have designed all the three classes to include all the operational logic (details of which are not relevant in context of the question). Now, I need to create views/reports/data grids which contain details from multiple classes, for example, say, a list of all students doing projects in Chemistry mentored by a teacher whose name is the parameter to the query. This is just one example of a view, there are many different views in the application, which uses data from 3-4 tables, and each of them have multiple input parameters to generate them. Considering this particular example, I have written the relevant query using JOIN and the results are as expected and proper, now here is the dilemma: Keeping in mind the single responsibility principle, where should I keep this query? It does not belong to either Student class, or Teacher class or any other classes currently present. a) Should I create a new class, say dataView class, and design it as a MVC pattern and keep the query there? What about the other views? how do they fit in this architecture? b) Should I not keep the query in code at all, and make it DB View ? c) Am I completely wrong in the approach? If so what is the right approach? My considerations are as follows: a) should be easy to add new views later on if requirement comes, without having to copy-paste-modify code b) would like to make it as loosely coupled as possible so that if minor db structure changes happen, it does not break I did google searches on report design and OOP report generators, but all the result seem to focus on the visual design of the report rather than fetching the data. I have already taken care of the visual aspect of the report using MVC with html templates. I am sure this is a very fundamental problem with known solution, but I am somehow not able to find it (maybe searching with wrong keyword). Edit1: Modified the title to make it more relevant Edit2: The accepted answer got me thinking in the right direction and identify my design flaws, which eventually led me to find this question and the solution in Stack Overflow which gave me the detailed answer to clear the confusion.

  Read the article

< Previous Page | 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014  | Next Page >