Search Results

Search found 27890 results on 1116 pages for 'oracle retail documentation team'.

Page 1012/1116 | < Previous Page | 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019  | Next Page >

• Tools for Maintaining Branches in SVN

  - by Chris Conway

  My team uses SVN for source control. Recently, I've been working on a branch with occasional merges from the trunk and it's been a fairly annoying experience (cf. Joel Spolsky's "Subversion Story #1"), so I've been looking alternative ways to manage branches and merging. Given that a centralized SVN repository is non-negotiable, what I'd like is a set of tools that satisfy the following conditions. Complete revision history should be stored in SVN for both trunk and branches. Merging in either direction (and potentially criss-crossing) should be relatively painless. Merging history should be stored in SVN to the greatest extent possible. I've looked at both git-svn and bzr-svn and neither seems to be up to the job—basically, given the revision history they can export from the SVN repository, they can't seem to do any better a job handling merges than SVN can. For example, after cloning the repository with git, the revision history for my branch shows the original branch off of trunk, but git doesn't "see" any of the interim SVN merges as "native" merges—the revision history is one long line. As a result, any attempts to merge from trunk in git yield just as many conflicts as an SVN merge would. (Besides, the git-svn documentation explicitly warns against using git to merge between branches.) Is there a way to adjust my workflow to make git satisfy the above requirements? Maybe I just need tips or tricks (or a separate merging tool?) to help SVN be better at merging into branches?

  Read the article

• Stack and Hash joint

  - by Alexandru

  I'm trying to write a data structure which is a combination of Stack and HashSet with fast push/pop/membership (I'm looking for constant time operations). Think of Python's OrderedDict. I tried a few things and I came up with the following code: HashInt and SetInt. I need to add some documentation to the source, but basically I use a hash with linear probing to store indices in a vector of the keys. Since linear probing always puts the last element at the end of a continuous range of already filled cells, pop() can be implemented very easy without a sophisticated remove operation. I have the following problems: the data structure consumes a lot of memory (some improvement is obvious: stackKeys is larger than needed). some operations are slower than if I have used fastutil (eg: pop(), even push() in some scenarios). I tried rewriting the classes using fastutil and trove4j, but the overall speed of my application halved. What performance improvements would you suggest for my code? What open-source library/code do you know that I can try?

  Read the article

• How to add support for a new language in FlashDevelop?

  - by TandemAdam

  I am interested in making a plugin for FlashDevelop to add support for another language. I am not too sure where I should start. So any starting points, hint, tips, or advice would go down well. There is a Plugin Development article on the FlashDevelop Wiki, but the section about adding support for new languages is just a "TODO". So this is less than helpful. I guess there are a number of parts to "supporting" a language in FlashDevelop. Here is my list, but feel free to tell me if I've missed something: Code Completion Syntax Highlighting Should appear in the "New Project" menu as a Template Should add file type/template to the "Add-New" menu Add the new project filetype (e.g. .as3proj, .as3proj, .hxproj). So how do I do all of these things? Where do I even start? Are there any good resources, documentation, or basic examples to follow? Can all of this (including the project templates) be done inside one plugin?

  Read the article

• PHP Site Deployment Suggestion

  - by TheOnly92

  I'm currently quite troubled by the way of deployment my team is adopting... It's very old-fashioned and I know it doesn't work very well. But I don't exactly know how to change it, so please give some suggestions about it... Here is our current setup: 2 webservers 1 database server 1 test server Current deployment adaptation 1. We develop and work on the test server, every changes is uploaded manually to the test server. 2. When a change or feature is complete, we then commit the changes to SVN repository. 3. After committing the changes, we then upload our changes to the first webserver, where there will be a cronjob running every minute to sync the files between the servers. Something very annoying is, whenever we upload a file just as the syncing job starts, the file that is sync-ed will appear corrupted, since it is only half-uploaded. Another thing is whenever there is a deployment fault, it will be extremely difficult to revert. These are basically the problem I'm facing, what should I do?

  Read the article

• Using hibernate criteria, is there a way to escape special characters?

  - by Kevin Crowell

  For this question, we want to avoid having to write a special query since the query would have to be different across multiple databases. Using only hibernate criteria, we want to be able to escape special characters. This situation is the reason for needing the ability to escape special characters: Assume that we have table 'foo' in the database. Table 'foo' contains only 1 field, called 'name'. The 'name' field can contain characters that may be considered special in a database. Two examples of such a name are 'name_1' and 'name%1'. Both the '_' and '%' are special characters, at least in Oracle. If a user wants to search for one of these examples after they are entered in the database, problems may occur. criterion = Restrictions.ilike("name", searchValue, MatchMode.ANYWHERE); return findByCriteria(null, criterion); In this code, 'searchValue' is the value that the user has given the application to use for its search. If the user wants to search for '%', the user is going to be returned with every 'foo' entry in the database. This is because the '%' character represents the "any number of characters" wildcard for string matching and the SQL code that hibernate produces will look like: select * from foo where name like '%' Is there a way to tell hibernate to escape certain characters, or to create a workaround that is not database type sepecific?

  Read the article

• What is a good embeddable Java LDAP server?

  - by LeedsSideStreets

  I'm working on a Java web application that integrates with a few other external applications that are deployed along with it. Authentication information must be synchronized across everything and the other applications want to authenticate against LDAP. The application will be deployed in environments where there will be no other LDAP server for everything to use; I have to provide it. My solution so far has been to use Penrose Server as a standalone app, which I set up to examine tables in the main application's database and publish LDAP based on that. It works well, but it would be nice to have something that can be embedded into the main application itself to simplify deployment. It looks like Penrose can be embedded, but the documentation can be a bit spotty or out-of-date (though it seems to be actively developed). It could be an acceptable solution, but if there is another out there that is known to work well in an embedded configuration I might want to check it out. I'm also concerned about GPL issues with Penrose. I'm not at liberty to GPL the source code for the application. I don't believe it was an issue running it standalone, but embedding it may be no-no... anybody know for sure? A permissive license would be good in order to avoid these issues. Requirements: LDAP v3 Must be able to be have the directory contents updated while running, either programmatically or by another means like syncing with the database as Penrose does Easy to configure (no additional configuration for the app at deployment time would be ideal) So far I've briefly looked at ApacheDS and OpenDS which seem to be embeddable. Does anyone have experience with this kind of thing?

  Read the article

• Problems getting text from an openWysiwyg enabled TextBox

  - by stephenbayer

  I have a multiline text box on a form. I dropped in the js file for openWYSIWYG and attached it to the textbox. When I submit the form, the text box has no value. I'm having problems finding documentation on this library. Has anyone else used this who would be able to direct me as to where I can troubleshoot this issue. The HTML is here: <table> <tr><td>Comment</td> <td><asp:TextBox ID="txtComment" Height="150px" TextMode="MultiLine" runat="server" /> </td> </tr> <tr><td colspan="2"><asp:Button ID="btnSubmit" runat="server" OnClick="btnSumbit_Click" Text="Submit" /> </table> <script type="text/javascript" language="javascript"> WYSIWYG.attach('<%= txtComment.ClientID %>', full); </script> The codebehind for the method is: public void btnSumbit_Click(object sender, EventArgs e) { //txtComment.Text is "" The text is not available }

  Read the article

• List of rich web application technologies

  - by Michal Czardybon

  I am trying to get myself acquainted with the world of rich web application. There are some comparison tables of available technologies on the Wikipedia, but I still find it unclear what are the options for rich application development. Could you please verify and complete the information I gathered below? What are the key pros and cons of each option? Which is the best choice for big and very rich web application? Option 1: ASP.NET/ASP.NET MVC Vendor: Microsoft Environment: Visual Studio Language: C# Output: HTML+JavaScript+AJAX Example: www.stackoverflow.com Option 2: Silverlight Vendor: Microsoft Environment: Visual Studio Language: C# Output: .NET executable? Example: ? Option 3: Google Web Toolkit Vendor: Google Environment: Eclipse Language: Java Output: HTML+JavaScript+AJAX Example: http://www.projectkaiser.com:8080/pk/ Option 4: Flex Vendor: Adobe Environment: ? Language: ? Output: Flash (.swf file) Example: http://listen.grooveshark.com/ Option 5: Adobe AIR Vendor: Adobe Environment: ? Language: ? Output: AIR Example: http://www.colabolo.com/en/download.html Option 5: Ruby on Rails Vendor: Rails Core Team Envirnoment: ? Language: Ruby Output: HTML+JavaScript+AJAX? Example: ? Option 6: Java Applets Vendor: Sun Environment: Eclipse Language: Java Output: Java Applet Option 7: OpenLeszlo Vendor: ? Environment: ? Language: ? Output: ? Example: ? Option 8: Python? ??? Option 9: XUL ???

  Read the article

• Unit Testing using InternalsVisibleToAttribute requires compiling with /out:filename.ext?

  - by Will Marcouiller

  In my most recent question: Unit Testing Best Practice? / C# InternalsVisibleTo() attribute for VBNET 2.0 while testing?, I was asking about InternalsVisibleToAttribute. I have read the documentation on how to use it, and everything is fine and understood. However, I can't instantiate my class Groupe from my Testing project. I want to be able to instantiate my internal class in my wrapper assembly, from my testing assembly. Any help is appreciated! EDIT #1 Here's the compile-time error I get when I do try to instantiate my type: Erreur 2 'Carra.Exemples.Blocs.ActiveDirectory.Groupe' n'est pas accessible dans ce contexte, car il est 'Private'. C:\Open\Projects\Exemples\Src\Carra.Exemples.Blocs.ActiveDirectory\Carra.Exemples.Blocs.ActiveDirectory.Tests\GroupeTests.vb 9 18 Carra.Exemples.Blocs.ActiveDirectory.Tests (This says that my type is not accessible in this context, because it is private.) But it's Friend (internal)! EDIT #2 Here's a piece of code as suggested for the Groupe class implementing the Public interface IGroupe: #Region "Importations" Imports System.DirectoryServices Imports System.Runtime.CompilerServices #End Region <Assembly: InternalsVisibleTo("Carra.Exemples.Blocs.ActiveDirectory.Tests")> Friend Class Groupe Implements IGroupe #Region "Membres privés" Private _classe As String = "group" Private _domaine As String Private _membres As CustomSet(Of IUtilisateur) Private _groupeNatif As DirectoryEntry #End Region #Region "Constructeurs" Friend Sub New() _membres = New CustomSet(Of IUtilisateur)() _groupeNatif = New DirectoryEntry() End Sub Friend Sub New(ByVal domaine As String) If (String.IsNullOrEmpty(domaine)) Then Throw New ArgumentNullException() _domaine = domaine _membres = New CustomSet(Of IUtilisateur)() _groupeNatif = New DirectoryEntry(domaine) End Sub Friend Sub New(ByVal groupeNatif As DirectoryEntry) _groupeNatif = groupeNatif _domaine = _groupeNatif.Path _membres = New CustomSet(Of IUtilisateur)() End Sub #End Region And the code trying to use it: #Region "Importations" Imports NUnit.Framework Imports Carra.Exemples.Blocs.ActiveDirectory.Tests #End Region <TestFixture()> _ Public Class GroupeTests <Test()> _ Public Sub CreerDefaut() Dim g As Groupe = New Groupe() Assert.IsNotNull(g) Assert.IsInstanceOf(Groupe, g) End Sub End Class EDIT #3 Damn! I have just noticed that I wasn't importing the assembly in my importation region. Nope, didn't solve anything =( Thanks!

  Read the article

• Problems with ltk (common lisp)

  - by Silvanus

  I installed ltk to Steel Bank Common Lisp with asdf-install, but I can't even start using it V_V. The code below is the simplest example in the documentation, and is copied almost verbatim. asdf:operate 'asdf:load-op :ltk) (defun hello-1() (with-ltk () (let ((b (make-instance 'button :master nil :text "Press Me" :command (lambda () (format t "Hello World!~&"))))) (pack b)))) (hello-1) This is the error message I get from sbcl: ; in: LAMBDA NIL ; (PACK B) ; ; caught STYLE-WARNING: ; undefined function: PACK ; (WITH-LTK NIL ; (LET ((B (MAKE-INSTANCE 'BUTTON :MASTER NIL :TEXT "Press Me" :COMMAND #))) ; (PACK B))) ; ; caught STYLE-WARNING: ; undefined function: WITH-LTK ; ; compilation unit finished ; Undefined functions: ; PACK WITH-LTK ; caught 2 STYLE-WARNING conditions debugger invoked on a SIMPLE-ERROR in thread #: There is no class named BUTTON. Type HELP for debugger help, or (SB-EXT:QUIT) to exit from SBCL. restarts (invokable by number or by possibly-abbreviated name): 0: [ABORT] Exit debugger, returning to top level. (SB-PCL::FIND-CLASS-FROM-CELL BUTTON NIL T)

  Read the article

• LaTeX: bibliography per chapter.

  - by YuppieNetworking

  Hello all, I am helping a colleague with his PhD thesis and we need to present the bibliography at the end of each chapter. The question is: does anyone have a minimal working example for this case using latex+bibtex? The current document structure that we use is the following: main.tex chap1.tex chap2.tex ... chapn.tex biblio.bib Where main.tex contains packages, document declarations, macros and \includes for each chapter. biblio.bib is the only bibtex file (I think is easier to have all citations in one place). We have searched and tried with different latex packages, reading and following their documentation. Specifically, bibitems and chapterbib. bibitems successfully generates bu*.aux files, but when running bibtex for each one of them, an error occurs since there is no \bibdata element in the .aux file. chapterbib also generates a .aux file, but bibtex finishes with an error caused by using multiple \bibliography{file} in the .tex files (one per chapter). Some coworkers suggested using a separate bibtex file for each chapter, which could be a problem of maintenance in the future when citing the same publications in different chapters. We will like to continue having this document structure, if possible. So, if anyone could shed some light to this problem, we will appreciate it. Thanks.

  Read the article

• Windows-Mobile Directshow: Specifying bitrate/quality of a WMV video capture

  - by Landstander

  Hi- I'm stumped on this, and I'm really hoping someone could point me in the right direction. I'm currently capturing video in Windows Mobile and encoding it using the WMV 9 DMO (CLSID_CWMV9EncMediaObject). That all works well enough, but the output video's bitrate is too high, resulting in a video file that's much too large for my needs. Ultimately, my goal is to mimic the video settings that Microsoft's Camera Capture Dialog outputs in the "messaging" quality mode (64kbps) from my C++ code. Currently, my code's outputting a WMV file with a bitrate of 352kbps. The only example I could find of specifying the capture bitrate with a WMV9 DMO was this. The idea in that code was basically to use a propertybag to write a bitrate to a property of the DMO. Update: In windows mobile, the closest codec property I can find that seems to equate to the bitrate is "g_wszWMVCVBRQuality". Microsoft's documentation of this property is extremely confusing to me: It basically seems to say that a higher number equates to a higher quality, but it gives absolutely no explanation of the specifics for each number. When I attempt to set this property to value like "1" via a propertybag for the WMV9 DMO, I run into a -2147467259 (unknown) error. To summarize: What is the basic strategy to specify the bitrate/quality of a video being captured via directshow (wmv9) on a windows mobile platform? I've heard (or wondered about) the following methods: Use the propertybag to change the encoder DMO's property that corresponds to bitrate/quality (currently failing) Create your own custom transcoder/encoder to specify it. This seems unnecessary since the WMV encoder works well enough- it's just at too high a bitrate. The VIDEOINFOHEADER has a bitrate property, but I suspect that specifying new settings here will do nothing to alter the actual encoding process since I wouldn't think file attributes would come into play until after the encoding. Any suggestions? PS: I would post specific source code, but at this point it may confuse more than it helps since I'm floundering so much on how to do this. At this point, I'm just trying to validate the general strategy. THANKS!

  Read the article

• Posting messages in two RabbitMQ queue, instead of one (using py-amqp)

  - by Khelben

  I've got this strange problem using py-amqp and the Flopsy module. I have written a publisher that sends messages to a RabbitMQ server, and I wanted to be able to send it to a specified queue. On the Flopsy module that is not possible, so I tweaked it adding a parameter and a line to declare the queue on the init_ method of the Publisher object def __init__(self, routing_key=DEFAULT_ROUTING_KEY, exchange=DEFAULT_EXCHANGE, connection=None, delivery_mode=DEFAULT_DELIVERY_MODE, queue=DEFAULT_QUEUE): self.connection = connection or Connection() self.channel = self.connection.connection.channel() self.channel.queue_declare(queue) # ADDED TO SET UP QUEUE self.exchange = exchange self.routing_key = routing_key self.delivery_mode = delivery_mode The channel object is part of the py-amqplib library The problem I've got it's that, even if it's sending the messages to the specified queue, it's ALSO sending the messages to the default queue. AS in this system we expect to send quite a lot of messages, we don't want to stress the system making useless duplicates... I've tried to debug the code and go inside the py-amqplib library, but I'm not able figure out any error or lacking step. Also, I'm not able to find any documentation form py-amqplib outside the code. Any ideas on why is this happening and how to correct it?

  Read the article

• PHP and C# communication on IIS7 (to generate dynamic PDF)

  - by David Murdoch

  Background: I couldn't find any decent free HTML to PDF conversion utilities in C#. There are 100s of them for PHP with extensive documentation, support, and CSS support. So I am using html2ps and html2pdf (php). I have PHP 5.2 installed on IIS7 and its working beautifully to create PDFs. I have the following in getPDF.aspx <!-- Output the header --> <DM:header runat="server" ID="header" /> <asp:Placeholder id="content" runat="server" /> <!-- Output the footer --> <DM:footer runat="server" ID="footer" /> and in getPDF.aspx.cs: protected void Page_Load(object sender, EventArgs e){ // AddContentControl simples adds a controls to the content Placeholder. AddContentControl("controls/page1.ascx"); AddContentControl("controls/page2.ascx"); AddContentControl("controls/page3.ascx"); } and in generatePDF.php: <?php /* ... includes and stuff here ... */ $data = "THE HTML GOES HERE!"; // creates the PDF from the $data and Outputs the created file. convert_to_pdf($data); ?> -- getPDF.aspx works perfectly...except the output is HTML. So how can I get getPDF.aspx to output its HTML as PDF generated by generatePDF.php?

  Read the article

• How to serve tiff WMS imagery through GeoServer

  - by mikem419

  Ok so I am new to the GeoServer/database world. I am a student intern and I have been given the task of setting up a WMS using GeoServer. I have never done any database work before this so bare with me if my questions leave out important information. I am using GeoServer 2.0.1 in standalone mode (downloaded using Jetty) with PostgreSQL 8.4 installed. I went through nyc_roads and nyc_buildings install demo in the GeoServer documentation but I still do not understand how I should go about serving up some test images. I noticed that the nyc_roads setup included a .sql file that was responsible for setting up the nyc_buildings database. I do not know how/where this file was generated. Our test images are .tiff and .jpeg. I have successfully been able to do a WMS call on the local GeoServer machine, and have opened the included demo imagery. I now wish to add these .tiff and .jpeg images to GeoServer and access them through WMS. I have tried copying the images to the GeoServer data directory,adding a new data store, and layers, but I always receive an error regarding the "input stream." Again I am very sorry if I am leaving out allot of vital information, this is as much as I know. thanks!

  Read the article

• Solutions for working with multiple branches in ASP.Net

  - by Corey McKinnon

  At work, we are often working on multiple branches of our product at one time. For example, right now, we have a maintenance branch, a branch with code just going to QA, and a branch for a new major initiative, that won't be merged for some time now. Our web project is set up to use IIS, so every time we switch to a different branch, we have to go in to IIS Admin and change the path on the virtual directory, then reset IIS, and sometimes even restart Visual Studio, to avoid getting build errors. Is there any way to simplify this, other than not having our web project set up as a virtual directory? I'm not sure we want to make that change at this point. What do you do to make this easier, assuming you do this? Corey @RedWolves, virtual machines would definitely work, but I'm not sure it would be any simpler, especially for some of the other developers on my team, which is partly why I'm looking for more simplicity. @Dan, we're not able to change source control providers, unfortunately. @pix0r, that's something I'll try when I get back to work. Thanks for the suggestion. @Haacked, I'll have to give that a try too, but I think we have some issues with why that won't work (I can't remember exactly why right now; this application was originally written in .Net 1.1, pre-Cassini, and I can't remember if we tried it when we upgraded to 2.0 or not). Thanks all for the responses so far.

  Read the article

• jQuery Countdown plugin and AJAX

  - by roman m

  I'm using jQuery Countdown plugin to implement a Countdown and call a webservice when timer expires. The problem is that I'm using AJAX on the page, and have to re-setup the Countdown on every AJAX request like so: var prm = Sys.WebForms.PageRequestManager.getInstance(); prm.add_endRequest(SetupTimer); /*Initial setup*/ $(document).ready(function() { SetupTimer(); }); function SetupTimer() { var serverTime = new Date(); var cutoffTime = new Date($("#<%= cutoffTime.ClientID %>").val()); serverTime.setHours(serverTime.getHours()); if (serverTime < cutoffTime) { $('#timer').countdown('destroy'); /*should work, but doesn't*/ $('#timer').countdown({ until: cutoffTime, serverTime: serverTime, onExpiry: OrderingEnded, format: 'yowdHMS' }); } else OrderingEnded(); } This, for some reason, creates a new instance of the Countdown on ever request, resulting in numerous calls to Webservice when Countdown expires. How do I make sure that only one instance of the Countdown exists at a time? EDIT found this in documentation, doesn't do it for me though $('#timer').countdown('destroy');

  Read the article

• Scalable / Parallel Large Graph Analysis Library?

  - by Joel Hoff

  I am looking for good recommendations for scalable and/or parallel large graph analysis libraries in various languages. The problems I am working on involve significant computational analysis of graphs/networks with 1-100 million nodes and 10 million to 1+ billion edges. The largest SMP computer I am using has 256 GB memory, but I also have access to an HPC cluster with 1000 cores, 2 TB aggregate memory, and MPI for communication. I am primarily looking for scalable, high-performance graph libraries that could be used in either single or multi-threaded scenarios, but parallel analysis libraries based on MPI or a similar protocol for communication and/or distributed memory are also of interest for high-end problems. Target programming languages include C++, C, Java, and Python. My research to-date has come up with the following possible solutions for these languages: C++ -- The most viable solutions appear to be the Boost Graph Library and Parallel Boost Graph Library. I have looked briefly at MTGL, but it is currently slanted more toward massively multithreaded hardware architectures like the Cray XMT. C - igraph and SNAP (Small-world Network Analysis and Partitioning); latter uses OpenMP for parallelism on SMP systems. Java - I have found no parallel libraries here yet, but JGraphT and perhaps JUNG are leading contenders in the non-parallel space. Python - igraph and NetworkX look like the most solid options, though neither is parallel. There used to be Python bindings for BGL, but these are now unsupported; last release in 2005 looks stale now. Other topics here on SO that I've looked at have discussed graph libraries in C++, Java, Python, and other languages. However, none of these topics focused significantly on scalability. Does anyone have recommendations they can offer based on experience with any of the above or other library packages when applied to large graph analysis problems? Performance, scalability, and code stability/maturity are my primary concerns. Most of the specialized algorithms will be developed by my team with the exception of any graph-oriented parallel communication or distributed memory frameworks (where the graph state is distributed across a cluster).

  Read the article

• Can a call to WaitHandle.SignalAndWait be ignored for performance profiling purposes?

  - by Dan Tao

  I just downloaded the trial version of ANTS Performance Profiler from Red Gate and am investigating some of my team's code. Immediately I notice that there's a particular section of code that ANTS is reporting as eating up to 99% CPU time. I am completely unfamiliar with ANTS or performance profiling in general (that is, aside from self-profiling using what I'm sure are extremely crude and frowned-upon methods such as double timeToComplete = (endTime - startTime).TotalSeconds), so I'm still fiddling around with the application and figuring out how it's used. But I did call the developer responsible for the code in question and his immediate reaction was "Yeah, that doesn't surprise me that it says that; but that code calls SignalAndWait [which I could see for myself, thanks to ANTS], which doesn't use any CPU, it just sits there waiting for something to do." He advised me to simply ignore that code and look for anything ELSE I could find. My question: is it true that SignalAndWait requires NO CPU overhead (and if so, how is this possible?), and is it reasonable that a performance profiler would view it as taking up 99% CPU time? I find this particularly curious because, if it's at 99%, that would suggest that our application is often idle, wouldn't it? And yet its performance has become rather sluggish lately. Like I said, I really am just a beginner when it comes to this tool, and I don't know anything about the WaitHandle class. So ANY information to help me to understand what's going on here would be appreciated.

  Read the article

• blackberry smartcard reader example

  - by pajton

  I am writing an app for BlackBerry that utilizes a BlackBerry smartcard reader. There is not much documentation on the subject, so I'd really like if someone could give me starting examples. Basically, there is one RSA private key on the card plus a certificate (for paired public key). I would like to be able to encrypt/decrypt data and also sign it as well. The final goal would be to establish an mutual-authenticated SSL connection using client certificate contained on the smartcard. Here is the code I managed to come up with so far: SmartCardReader btReader = null; SmartCardReader[] readers = SmartCardReaderFactory.getInstalledReaders(); for (int i = 0; i < readers.length; i++) { SmartCardReader reader = readers[i]; if (reader.getType().equalsIgnoreCase("bluetooth")) { btReader = reader; break; } } SmartCardReaderSession readerSession = reader.openSession(); CryptoSmartCard card = (CryptoSmartCard) readerSession.getSmartCard(); RSACryptoToken token = (RSACryptoToken) card.getCryptoToken("RSA"); This token looks promising - has some nice methods, but with "cryptic" arguments. What to do next?

  Read the article

• Cocoa NSStream TCP connection to FTP

  - by Chuck

  Hi, I'm new to Cocoa, but not to programming. Recently I decided I wanted to write a FTP client for Mac, and so I first made it in the language I'm most comfortable in (on Windows), and then moved on to Cocoa when I had the workings of FTP communications down. My question is (apparently) a bit controversial: How do I establish a read/writeable connection to (a ftp server)? What I have so far (non working obviously): NSInputStream *iStream; NSOutputStream *oStream; NSHost *host = [NSHost hostWithAddress:@"127.0.0.1"]; [NSStream getStreamsToHost:host port:3333 inputStream:&iStream outputStream:&oStream]; // ftp port: 3333 [iStream retain]; [oStream retain]; [iStream scheduleInRunLoop:[NSRunLoop currentRunLoop] forMode:NSDefaultRunLoopMode]; [oStream scheduleInRunLoop:[NSRunLoop currentRunLoop] forMode:NSDefaultRunLoopMode]; [iStream setDelegate:self]; [oStream setDelegate:self]; // which is not implemented apparently [iStream open]; [oStream open]; // .... [iStream write: (const uint8_t *)buf maxLength:8]; Which is partially based on http://developer.apple.com/mac/library/documentation/cocoa/Conceptual/Streams/Articles/NetworkStreams.html Now, why have I chosen NSStream? Because while this question is merely about how to connect to a FTP stream, my whole project will also include SSL and as far as I've been able to search here and on google, NSStream is capable of "switching" to a SSL connection. I've not been able to see the connection being made (which I'm usually able to do), but I also heard something about having to write to the stream before the stream will open? Any pointers are greatly appreciated, and sorry if my question is annoying - I'm new to Cocoa :)

  Read the article

• According to MSDN ReadFile() Win32 function may incorrectly report read operation completion. When?

  - by Martin Dobšík

  The MSDN states in its description of ReadFile() function (http://msdn.microsoft.com/en-us/library/aa365467%28VS.85%29.aspx): “If hFile is opened with FILE_FLAG_OVERLAPPED, the lpOverlapped parameter must point to a valid and unique OVERLAPPED structure, otherwise the function can incorrectly report that the read operation is complete.” I have some applications that are violating the above recommendation and I would like to know the severity of the problem. I mean the program uses named pipe that has been created with FILE_FLAG_OVERLAPPED, but it reads from it using the following call: ReadFile(handle, &buf, n, &n_read, NULL); That means it passes NULL as the lpOverlapped parameter. That call should not work correctly in some circumstances according to documentation. I have spent a lot of time trying to reproduce the problem, but I was unable to! I always got all data in right place at right time. I was testing only Named Pipes though. Would anybody know when can I expect that ReadFile() will incorrectly return and report successful completion even the data are not yet in the buffer? What would have to happen in order to reproduce the problem? Does it happen with files, pipes, sockets, consoles, or other devices? Do I have to use particular version of OS? Or particular version of reading (like register the handle to I/O completion port)? Or particular synchronization of reading and writing processes/threads? Or when would that fail? It works for me :/ Please help! With regards Martin

  Read the article

• Webservices on iPhone - wsdl2objc - Sample Code?

  - by markmcgookin

  I have recently downloaded the most recent build of this awesome tool WSDL2OBJC from google code here: http://code.google.com/p/wsdl2objc/ After a bit of tweaking and downloading the latest version of the trunk from the svn repo I got a version that created the code for a WSDL I am using and compiles great and actually installs on my phone! However, I'm not doing anything with it yet, because I am not really sure how to. There is very little in the way of sample code on the site, and there is a sample file in the project if you download it, but again it is very complicated and there are no real bits of documentation. Has anyone managed to successfully use this stuff? It seems SOOO powerful and useful but from a look around the Internet, no one knows how to use it. We (all) would love someone who has figured it out to post a simple project or detailed walk-through of implementing this so we can put the code that lots of people have worked hard on to good use. If anyone has found a blog entry or has this information it would be great to see! I am totally stuck... with no errors. I would love to know how to use this now that it's all compiled successfully!

  Read the article

• StarTeam trunk.

  - by Nix

  I have the unfortunate opportunity of source control via Borland's StarTeam. It unfortunately does very few things well, and one supreme weakness is its view management. I love SVN and come from an SVN mindset. Our issue is post production release we are spending countless hours merging changes into a "production support" environment. Please do not harass me this was not my doing, I inherited it and am trying to present a better way of managing the repository. It is not an option to switch to a different SCM tool. Current setup Product.1.0 (TRUNK, current production code, and at this level are pending bug fixes) Product.2.0(true trunk anything checked in gets tested, and then released next production cycle, a lot of changes occur in this view) My proposal is going to be to swap them, have all development be done on the trunk (Production), tag on releases, and as needed create child views to represent production support bug fixes. Production Production.2.0.SP.1 I can not find any documentation to support the above proposal so I am trying to get feedback on whether or not the change is a good idea and if there is anything you would recommend doing differently.

  Read the article

• Multiple Jira instances on a single Tomcat 6 server?

  - by davidhayes

  I have a feeling this is a stupid question but I can't find the answer anywhere... I need to deploy 2 Jira instances on asingle Tomcat server, I can't figure out how to pass in the jira.home property The documentation says I need to:- Add a web context property called 'jira.home' — this property is set in different files depending on your application server. For example, for Tomcat (and therefore for JIRA Standalone), you will need to configure the server.xml file. For other application servers you may need to configure the web.xml file, or set 'Context parameter' options on the deployment UI of the application server, etc. Note that If you have specified a JIRA home in jira-application.properties (ie. the recommended method), it will override your web context property. I was hoping something like this would work. <Context jira.home="d:/jira/data" path="" docBase="D:\Jira\atlassian-jira-enterprise-4.1\dist-tomcat\tomcat-6\atlassian-jira-4.1.war" debug="0"> <Resource name="jdbc/JiraDS" auth="Container" type="javax.sql.DataSource" username="sa" password="*****" driverClassName="net.sourceforge.jtds.jdbc.Driver" url="jdbc:jtds:sqlserver://*****:1433/jira41_519;user=****;password=****" /> <Resource name="UserTransaction" auth="Container" type="javax.transaction.UserTransaction" factory="org.objectweb.jotm.UserTransactionFactory" jotm.timeout="60"/> <Manager pathname=""/> </Context> Any ideas??

  Read the article

< Previous Page | 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019  | Next Page >