Search Results

Search found 62161 results on 2487 pages for 'set difference'.

Page 1023/2487 | < Previous Page | 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030  | Next Page >

  • Getting Feedburner Subscriber With CURL

    - by Eray Alakese
    I'm using FeedBurner Awareness API. XML data like this : <rsp stat="ok"> - <!-- This information is part of the FeedBurner Awareness API. If you want to hide this information, you may do so via your FeedBurner Account. --> - <feed id="9n66llmt1frfir51p0oa367ru4" uri="teknoblogo"> <entry date="2011-01-15" circulation="11" hits="18" reach="0"/> </feed> </rsp> I want to get circulation data (11) . I'm using this code: $whaturl="https://feedburner.google.com/api/awareness/1.0/GetFeedData?uri=teknoblogo"; //Initialize the Curl session $ch = curl_init(); //Set curl to return the data instead of printing it to the browser. curl_setopt($ch, CURLOPT_RETURNTRANSFER, 1); //Set the URL curl_setopt($ch, CURLOPT_URL, $whaturl); //Execute the fetch $data = curl_exec($ch); //Close the connection curl_close($ch); $xml = new SimpleXMLElement($data); $fb = $xml->feed->entry['circulation']; echo $fb; echo "OK"; But, returned data is blank. There isn't any error. Only return OK . How can i solve this ? EDIT : echo $data; returning blank, too.

    Read the article

  • Enumerate all paths in a weighted graph from A to B where path length is between C1 and C2

    - by awmross
    Given two points A and B in a weighted graph, find all paths from A to B where the length of the path is between C1 and C2. Ideally, each vertex should only be visited once, although this is not a hard requirement. I supose I could use a heuristic to sort the results of the algorithm to weed out "silly" paths (e.g. a path that just visits the same two nodes over and over again) I can think of simple brute force algorithms, but are there any more sophisticed algorithms that will make this more efficient? I can imagine as the graph grows this could become expensive. In the application I am developing, A & B are actually the same point (i.e. the path must return to the start), if that makes any difference. Note that this is an engineering problem, not a computer science problem, so I can use an algorithm that is fast but not necessarily 100% accurate. i.e. it is ok if it returns most of the possible paths, or if most of the paths returned are within the given length range.

    Read the article

  • Eclipse won't believe I have Maven 2.2.1

    - by Andrew Clegg
    I have a project (built from an AppFuse template) that requires Maven 2.2.1. So I upgraded to this (from 2.1.0) and set my path and my M2_HOME and MAVEN_HOME env variables. Then I ran mvn eclipse:eclipse and imported the project into Eclipse (Galileo). However, in the problems list for the project (and at the top of the pom.xml GUI editor) it says: Unable to build project '/export/people/clegg/data/GanymedeWorkspace/funcserve/pom.xml; it requires Maven version 2.2.1 (Please ignore 'GanymedeWorkspace', I really am using Galileo!) This persists whether I set Eclipse to use its Embedded Maven implementation, or the external 2.2.1 installation, in the Preferences - Maven - Installations dialog. I've tried closing and reopening the project, reindexing the repository, cleaning the project, restarting the IDE, logging out and back in again, everything I can think of! But Eclipse still won't believe I have Maven 2.2.1. I just did a plugin update so I have the latest version of Maven Integration for Eclipse -- 0.9.8.200905041414. Does anyone know how to convince Eclipse I really do have the right version of Maven? It's like it's recorded the previous version somewhere else and won't pay any attention to my changes :-( Many thanks! Andrew.

    Read the article

  • .NET Speech recognition plugin Runtime Error: Unhandled Exception. What could possibly cause it?

    - by manuel
    I'm writing a plugin (dll file) for speech recognition, and I'm creating a WinForm as its interface/dialog. When I run the plugin and click the 'Speak' to start the initialization, I get an unhandled exception. Here is a piece of the code: public ref class Dialog : public System::Windows::Forms::Form { public: SpeechRecognitionEngine^ sre; private: System::Void btnSpeak_Click(System::Object^ sender, System::EventArgs^ e) { Initialize(); } protected: void Initialize() { if (System::Threading::Thread::CurrentThread->GetApartmentState() != System::Threading::ApartmentState::STA) { throw gcnew InvalidOperationException("UI thread required"); } //create the recognition engine sre = gcnew SpeechRecognitionEngine(); //set our recognition engine to use the default audio device sre->SetInputToDefaultAudioDevice(); //create a new GrammarBuilder to specify which commands we want to use GrammarBuilder^ grammarBuilder = gcnew GrammarBuilder(); //append all the choices we want for commands. //we want to be able to move, stop, quit the game, and check for the cake. grammarBuilder->Append(gcnew Choices("play", "stop")); //create the Grammar from th GrammarBuilder Grammar^ customGrammar = gcnew Grammar(grammarBuilder); //unload any grammars from the recognition engine sre->UnloadAllGrammars(); //load our new Grammar sre->LoadGrammar(customGrammar); //add an event handler so we get events whenever the engine recognizes spoken commands sre->SpeechRecognized += gcnew EventHandler<SpeechRecognizedEventArgs^> (this, &Dialog::sre_SpeechRecognized); //set the recognition engine to keep running after recognizing a command. //if we had used RecognizeMode.Single, the engine would quite listening after //the first recognized command. sre->RecognizeAsync(RecognizeMode::Multiple); //this->init(); } void sre_SpeechRecognized(Object^ sender, SpeechRecognizedEventArgs^ e) { //simple check to see what the result of the recognition was if (e->Result->Text == "play") { MessageBox(plugin.hwndParent, L"play", 0, 0); } if (e->Result->Text == "stop") { MessageBox(plugin.hwndParent, L"stop", 0, 0); } } };

    Read the article

  • ActiveRecord exceptions not rescued

    - by zoopzoop
    I have the following code block: unless User.exist?(...) begin user = User.new(...) # Set more attributes of user user.save! rescue ActiveRecord::RecordInvalid, ActiveRecord::RecordNotUnique => e # Check if that user was created in the meantime user = User.exists?(...) raise e if user.nil? end end The reason is, as you can probably guess, that multiple processes might call this method at the same time to create the user (if it doesn't already exist), so while the first one enters the block and starts initializing a new user, setting the attributes and finally calling save!, the user might already be created. In that case I want to check again if the user exists and only raise the exception if it still doesn't (= if no other process has created it in the meantime). The problem is, that regularly ActiveRecord::RecordInvalid exceptions are raised from the save! and not rescued from the rescue block. Any ideas? EDIT: Alright, this is weird. I must be missing something. I refactored the code according to Simone's tip to look like this: unless User.find_by_email(...).present? # Here we know the user does not exist yet user = User.new(...) # Set more attributes of user unless user.save # User could not be saved for some reason, maybe created by another request? raise StandardError, "Could not create user for order #{self.id}." unless User.exists?(:email => ...) end end Now I got the following exception: ActiveRecord::RecordNotUnique: Mysql::DupEntry: Duplicate entry '[email protected]' for key 'index_users_on_email': INSERT INTO `users` ... thrown in the line where it says 'unless user.save'. How can that be? Rails thinks the user can be created because the email is unique but then the Mysql unique index prevents the insert? How likely is that? And how can it be avoided?

    Read the article

  • Implementation of "Automatic Lightweight Migration" for Core Data (iPhone)

    - by RickiG
    Hi I would like to make my app able to do an automatic lightweight migration when I add new attributes to my core data model. In the guide from Apple this is the only info on the subject I could find: Automatic Lightweight Migration To request automatic lightweight migration, you set appropriate flags in the options dictionary you pass in addPersistentStoreWithType:configuration:URL:options:error:. You need to set values corresponding to both the NSMigratePersistentStoresAutomaticallyOption and the NSInferMappingModelAutomaticallyOption keys to YES: NSError *error; NSURL *storeURL = <#The URL of a persistent store#>; NSPersistentStoreCoordinator *psc = <#The coordinator#>; NSDictionary *options = [NSDictionary dictionaryWithObjectsAndKeys: [NSNumber numberWithBool:YES], NSMigratePersistentStoresAutomaticallyOption, [NSNumber numberWithBool:YES], NSInferMappingModelAutomaticallyOption, nil]; if (![psc addPersistentStoreWithType:<#Store type#> configuration:<#Configuration or nil#> URL:storeURL options:options error:&error]) { // Handle the error. } My NSPersistentStoreCoordinator is initialized in this way: - (NSPersistentStoreCoordinator *)persistentStoreCoordinator { if (persistentStoreCoordinator != nil) { return persistentStoreCoordinator; } NSURL *storeUrl = [NSURL fileURLWithPath: [[self applicationDocumentsDirectory] stringByAppendingPathComponent: @"FC.sqlite"]]; NSError *error = nil; persistentStoreCoordinator = [[NSPersistentStoreCoordinator alloc] initWithManagedObjectModel:[self managedObjectModel]]; if (![persistentStoreCoordinator addPersistentStoreWithType:NSSQLiteStoreType configuration:nil URL:storeUrl options:nil error:&error]) { NSLog(@"Unresolved error %@, %@", error, [error userInfo]); abort(); } return persistentStoreCoordinator; } I am having trouble seeing where and how I should add the Apple code to get the Automatic Lightweight Migration working?

    Read the article

  • WCF Service invalid with Silverlight

    - by Echilon
    I'm trying to get WCF working with Silverlight. I'm a total beginner to WCF but have written asmx services in the past. For some reason when I uncomment more than one method in my service Silverlight refuses to let me use it, saying it is invalid. My code is below if anyone could help. I'm using the Entity Framework if that makes a difference. [AspNetCompatibilityRequirements(RequirementsMode = AspNetCompatibilityRequirementsMode.Allowed)] public class MessageService {//: IMessageService { /// <summary> /// Sends a new message. /// </summary> /// <param name="recipientUsername">The recipient username.</param> /// <param name="subject">The subject.</param> /// <param name="messageBody">The message body.</param> [OperationContract] public void SendMessageByDetails(string recipientUsername, string subject, string messageBody) { MessageDAL.SendMessage(recipientUsername, subject, messageBody); } /// <summary> /// Sends a new message. /// </summary> /// <param name="msg">The message to send.</param> [OperationContract] public void SendMessage(Message msg) { MessageDAL.SendMessage(msg); } }

    Read the article

  • When is it better to use a method versus a property for a class definition?

    - by ccomet
    Partially related to an earlier question of mine, I have a system in which I have to store complex data as a string. Instead of parsing these strings as all kinds of separate objects, I just created one class that contains all of those objects, and it has some parser logic that will encode all properties into strings, or decode a string to get those objects. That's all fine and good. This question is not about the parser itself, but about where I should house the logic for the parser. Is it a better choice to put it as a property, or as a method? In the case of a property, say public string DataAsString, the get accessor would house the logic to encode all of the data into a string, while the set accessor would decode the input value and set all of the data in the class instance. It seems convenient because the input/output is indeed a string. In the case of a method, one method would be Encode(), which returns the encoded string. Then, either the constructor itself would house the logic for the decoding a string and require the string argument, or I write a Decode(string str) method which is called separately. In either case, it would be using a method instead of a property. So, is there a functional difference between these paths, in terms of the actual running of the code? Or are they basically equivalent and it then boils down to a choice of personal preference or which one looks better? And in that kind of question... which would look cleaner anyway?

    Read the article

  • iPhone Development - Location Accuracy

    - by Mustafa
    I'm using following conditions in-order to make sure that the location i get has adequate accuracy, In my case kCLLocationAccuracyBest. But the problem is that i still get inaccurate location. // Filter out nil locations if(!newLocation) return; // Make sure that the location returned has the desired accuracy if(newLocation.horizontalAccuracy < manager.desiredAccuracy) return; // Filter out points that are out of order if([newLocation.timestamp timeIntervalSinceDate:oldLocation.timestamp] < 0) return; // Filter out points created before the manager was initialized NSTimeInterval secondsSinceManagerStarted = [newLocation.timestamp timeIntervalSinceDate:locationManagerStartDate]; if(secondsSinceManagerStarted < 0) return; // Also, make sure that the cached location was not returned by the CLLocationManager (it's current) - Check for 5 seconds difference if([newLocation.timestamp timeIntervalSinceReferenceDate] < [[NSDate date] timeIntervalSinceReferenceDate] - 5) return; When i activate the GPS, i get inaccurate results before i actually get an accurate result. What methods do you use to get accurate/precise location information?

    Read the article

  • Too many open files in one of my java routine.

    - by Irfan Zulfiqar
    I have a multithreaded code that has to generated a set of objects and write them to a file. When I run it I sometime get "Too many open files" message in Exception. I have checked the code to make sure that all the file streams are being closed properly. Here is the stack trace. When I do ulimit -a, open files allowed is set to 1024. We think increasing this number is not a viable option / solution. [java] java.io.FileNotFoundException: /export/event_1_0.dtd (Too many open files) [java] at java.io.FileInputStream.open(Native Method) [java] at java.io.FileInputStream.<init>(FileInputStream.java:106) [java] at java.io.FileInputStream.<init>(FileInputStream.java:66) [java] at sun.net.www.protocol.file.FileURLConnection.connect(FileURLConnection.java:70) [java] at sun.net.www.protocol.file.FileURLConnection.getInputStream(FileURLConnection.java:161) [java] at java.net.URL.openStream(URL.java:1010) Now what we have identified so far by looking closely at the list of open files is that the VM is opening same class file multiple times. /export/BaseEvent.class 236 /export/EventType1BaseEvent.class 60 /export/EventType2BaseEvent.class 48 /export/EventType2.class 30 /export/EventType1.class 14 Where BaseEvent is partent of all the classes and EventType1 ant EventType2 inherits EventType1BaseEvent and EventType2BaseEvent respectively. Why would a class loader load the same class file 200+ times. It seems it is opening up the base class as many time it create any child instance. Is this normal? Can it be handler any other way apart from increasing the number of open files?

    Read the article

  • Use different configurations with Simple Injection

    - by Ruben.Canton
    I'm using the library "Simple Injector" (http://simpleinjector.codeplex.com) and it looks cool and nice. But after building a configuration and use it, now I want to know how to change from one configuration to another. Scenario: Let's imagine I've set up a configuration in the Global Asax and I have the public and global Container there. Now I want to make some tests and I want them to use mock classes so I want to change the configuration. I can, of course, build another configuration and assign it to the global Container created by default, so that every time I run a test the alternative configuration will be set. But on doing that and though I'm in development context the Container is changed for everyone, even for normal requests. I know I'm testing in this context and that shouldn't matter, but I have the feeling that this is not the way for doing this... and I wonder how to change from one configuration to another in the correct way. Note: At Simple Injector documentation says that you can ask questions in stackoverflow so that's why I'm here. =P PD: I'm new in this IoC and DI world so try to be easy with me when explaining it :)

    Read the article

  • How to stop Android GPS using "Mobile data"

    - by prepbgg
    My app requests location updates with "minTime" set to 2 seconds. When "Mobile data" is switched on (in the phone's settings) and GPS is enabled the app uses "mobile data" at between 5 and 10 megabytes per hour. This is recorded in the ICS "Data usage" screen as usage by "Android OS". In an attempt to prevent this I have unticked Settings-"Location services"-"Google's location service". Does this refer to Assisted GPS, or is it something more than that? Whatever it is, it seems to make no difference to my app's internet access. As further confirmation that it is the GPS usage by my app that is causing the mobile data access I have observed that the internet data activity indicator on the status bar shows activity when and only when the GPS indicator is present. The only way to prevent this mobile data usage seems to be to switch "Mobile data" off, and GPS accuracy seems to be almost as good without the support of mobile data. However, it is obviously unsatisfactory to have to switch mobile data off. The only permissions in the Manifest are "android.permission.ACCESS_FINE_LOCATION" (and "android.permission.WRITE_EXTERNAL_STORAGE"), so the app has no explicit permission to use internet data. The LocationManager code is ` criteria.setAccuracy(Criteria.ACCURACY_FINE); criteria.setSpeedRequired(false); criteria.setAltitudeRequired(false); criteria.setBearingRequired(true); criteria.setCostAllowed(false); criteria.setPowerRequirement(Criteria.NO_REQUIREMENT); bestProvider = lm.getBestProvider(criteria, true); if (bestProvider != null) { lm.requestLocationUpdates(bestProvider, gpsMinTime, gpsMinDistance, this); ` The reference for LocationManager.getBestProvider says If no provider meets the criteria, the criteria are loosened ... Note that the requirement on monetary cost is not removed in this process. However, despite setting setCostAllowed to false the app still incurs a potential monetary cost. What else can I do to prevent the app from using mobile data?

    Read the article

  • JavaFx 2.1, 2.2 TableView update issue

    - by Lewis Liu
    My application uses JPA read data into TableView then modify and display them. The table refreshed modified record under JavaFx 2.0.3. Under JavaFx 2.1, 2.2, the table wouldn't refresh the update anymore. I found other people have similar issue. My plan was to continue using 2.0.3 until someone fixes the issue under 2.1 and 2.2. Now I know it is not a bug and wouldn't be fixed. Well, I don't know how to deal with this. Following are codes are modified from sample demo to show the issue. If I add a new record or delete a old record from table, table refreshes fine. If I modify a record, the table wouldn't refreshes the change until a add, delete or sort action is taken. If I remove the modified record and add it again, table refreshes. But the modified record is put at button of table. Well, if I remove the modified record, add the same record then move the record to the original spot, the table wouldn't refresh anymore. Below is a completely code, please shine some light on this. import javafx.application.Application; import javafx.beans.property.SimpleStringProperty; import javafx.collections.FXCollections; import javafx.collections.ObservableList; import javafx.event.ActionEvent; import javafx.event.EventHandler; import javafx.geometry.HPos; import javafx.geometry.Insets; import javafx.geometry.Pos; import javafx.scene.Group; import javafx.scene.Scene; import javafx.scene.control.*; import javafx.scene.control.cell.PropertyValueFactory; import javafx.scene.layout.GridPane; import javafx.scene.layout.HBox; import javafx.scene.layout.VBox; import javafx.scene.text.Font; import javafx.stage.Modality; import javafx.stage.Stage; import javafx.stage.StageStyle; public class Main extends Application { private TextField firtNameField = new TextField(); private TextField lastNameField = new TextField(); private TextField emailField = new TextField(); private Stage editView; private Person fPerson; public static class Person { private final SimpleStringProperty firstName; private final SimpleStringProperty lastName; private final SimpleStringProperty email; private Person(String fName, String lName, String email) { this.firstName = new SimpleStringProperty(fName); this.lastName = new SimpleStringProperty(lName); this.email = new SimpleStringProperty(email); } public String getFirstName() { return firstName.get(); } public void setFirstName(String fName) { firstName.set(fName); } public String getLastName() { return lastName.get(); } public void setLastName(String fName) { lastName.set(fName); } public String getEmail() { return email.get(); } public void setEmail(String fName) { email.set(fName); } } private TableView<Person> table = new TableView<Person>(); private final ObservableList<Person> data = FXCollections.observableArrayList( new Person("Jacob", "Smith", "[email protected]"), new Person("Isabella", "Johnson", "[email protected]"), new Person("Ethan", "Williams", "[email protected]"), new Person("Emma", "Jones", "[email protected]"), new Person("Michael", "Brown", "[email protected]")); public static void main(String[] args) { launch(args); } @Override public void start(Stage stage) { Scene scene = new Scene(new Group()); stage.setTitle("Table View Sample"); stage.setWidth(535); stage.setHeight(535); editView = new Stage(); final Label label = new Label("Address Book"); label.setFont(new Font("Arial", 20)); TableColumn firstNameCol = new TableColumn("First Name"); firstNameCol.setCellValueFactory( new PropertyValueFactory<Person, String>("firstName")); firstNameCol.setMinWidth(150); TableColumn lastNameCol = new TableColumn("Last Name"); lastNameCol.setCellValueFactory( new PropertyValueFactory<Person, String>("lastName")); lastNameCol.setMinWidth(150); TableColumn emailCol = new TableColumn("Email"); emailCol.setMinWidth(200); emailCol.setCellValueFactory( new PropertyValueFactory<Person, String>("email")); table.setItems(data); table.getColumns().addAll(firstNameCol, lastNameCol, emailCol); //--- create a edit button and a editPane to edit person Button addButton = new Button("Add"); addButton.setOnAction(new EventHandler<ActionEvent>() { @Override public void handle(ActionEvent event) { fPerson = null; firtNameField.setText(""); lastNameField.setText(""); emailField.setText(""); editView.show(); } }); Button editButton = new Button("Edit"); editButton.setOnAction(new EventHandler<ActionEvent>() { @Override public void handle(ActionEvent event) { if (table.getSelectionModel().getSelectedItem() != null) { fPerson = table.getSelectionModel().getSelectedItem(); firtNameField.setText(fPerson.getFirstName()); lastNameField.setText(fPerson.getLastName()); emailField.setText(fPerson.getEmail()); editView.show(); } } }); Button deleteButton = new Button("Delete"); deleteButton.setOnAction(new EventHandler<ActionEvent>() { @Override public void handle(ActionEvent event) { if (table.getSelectionModel().getSelectedItem() != null) { data.remove(table.getSelectionModel().getSelectedItem()); } } }); HBox addEditDeleteButtonBox = new HBox(); addEditDeleteButtonBox.getChildren().addAll(addButton, editButton, deleteButton); addEditDeleteButtonBox.setAlignment(Pos.CENTER_RIGHT); addEditDeleteButtonBox.setSpacing(3); GridPane editPane = new GridPane(); editPane.getStyleClass().add("editView"); editPane.setPadding(new Insets(3)); editPane.setHgap(5); editPane.setVgap(5); Label personLbl = new Label("Person:"); editPane.add(personLbl, 0, 1); GridPane.setHalignment(personLbl, HPos.LEFT); firtNameField.setPrefWidth(250); lastNameField.setPrefWidth(250); emailField.setPrefWidth(250); Label firstNameLabel = new Label("First Name:"); Label lastNameLabel = new Label("Last Name:"); Label emailLabel = new Label("Email:"); editPane.add(firstNameLabel, 0, 3); editPane.add(firtNameField, 1, 3); editPane.add(lastNameLabel, 0, 4); editPane.add(lastNameField, 1, 4); editPane.add(emailLabel, 0, 5); editPane.add(emailField, 1, 5); GridPane.setHalignment(firstNameLabel, HPos.RIGHT); GridPane.setHalignment(lastNameLabel, HPos.RIGHT); GridPane.setHalignment(emailLabel, HPos.RIGHT); Button saveButton = new Button("Save"); saveButton.setOnAction(new EventHandler<ActionEvent>() { @Override public void handle(ActionEvent event) { if (fPerson == null) { fPerson = new Person( firtNameField.getText(), lastNameField.getText(), emailField.getText()); data.add(fPerson); } else { int k = -1; if (data.size() > 0) { for (int i = 0; i < data.size(); i++) { if (data.get(i) == fPerson) { k = i; } } } fPerson.setFirstName(firtNameField.getText()); fPerson.setLastName(lastNameField.getText()); fPerson.setEmail(emailField.getText()); data.set(k, fPerson); table.setItems(data); // The following will work, but edited person has to be added to the button // // data.remove(fPerson); // data.add(fPerson); // add and remove refresh the table, but now move edited person to original spot, // it failed again with the following code // while (data.indexOf(fPerson) != k) { // int i = data.indexOf(fPerson); // Collections.swap(data, i, i - 1); // } } editView.close(); } }); Button cancelButton = new Button("Cancel"); cancelButton.setOnAction(new EventHandler<ActionEvent>() { @Override public void handle(ActionEvent event) { editView.close(); } }); HBox saveCancelButtonBox = new HBox(); saveCancelButtonBox.getChildren().addAll(saveButton, cancelButton); saveCancelButtonBox.setAlignment(Pos.CENTER_RIGHT); saveCancelButtonBox.setSpacing(3); VBox editBox = new VBox(); editBox.getChildren().addAll(editPane, saveCancelButtonBox); Scene editScene = new Scene(editBox); editView.setTitle("Person"); editView.initStyle(StageStyle.UTILITY); editView.initModality(Modality.APPLICATION_MODAL); editView.setScene(editScene); editView.close(); final VBox vbox = new VBox(); vbox.setSpacing(5); vbox.getChildren().addAll(label, table, addEditDeleteButtonBox); vbox.setPadding(new Insets(10, 0, 0, 10)); ((Group) scene.getRoot()).getChildren().addAll(vbox); stage.setScene(scene); stage.show(); } }

    Read the article

  • Receiving generic typed <T> custom objects through remote object in Flex

    - by Aaron
    Is it possible to receive custom generic typed objects through AMF? I'm trying to integrate a flex app with an existing C# service but flex is choking on custom generic typed objects. As far as I can tell Flex doesn't even support generics, but I'd like to be able to even just read in the object and cast its members as necessary. I basically just want flex to ignore the <T>. I'm hopeful that there's a way to do this, since flex doesn't complain about typed collections (a server call returning List works fine and flex converts it to an ArrayCollection just like an un-typed List). Here's a trimmed down example of what's going on for me: The custom C# typed class public class TypeTest<T> { public T value { get; set; } public TypeTest () { } } The server method returning the typeTest public TypeTest<String> doTypeTest() { TypeTest<String> theTester = new TypeTest<String>("grrrr"); return theTester; } The corresponding flex value object: [RemoteClass(alias="API.Model.TypeTest")] public class TypeTest { private var _value:Object; public function get value():Object { return _value; } public function set value(theValue:Object):void { _value = value; } public function TypeTest() { } } and the result handler code: public function doTypeTest(result:TypeTest):void { var theString:String = result.value as String; trace(theString); } When the result handler is called I get the runtime error: TypeError: Error #1034: Type Coercion failed: cannot convert mx.utils::ObjectProxy@11a98041 to com.model.vos.TypeTest. Irritatingly if I change the result handler to take parameter of type Object it works fine. Anyone know how to make this work with the value object? I feel like i'm missing something really obvious.

    Read the article

  • Where to Store ID Field In Silverlight

    - by Blake Blackwell
    I am trying to use the MVVM pattern, and I am wondering where I place an ID value. Do I create a TextBlock that has its visibility property set to collapsed? Or is there a better place to store this kind of data? Currently the command parameter is set to: CommandParameter="{Binding ElementName=Name,Path=Text}" But I'd rather it be something like: CommandParameter="{Binding ElementName=Id,Path=Text}" I'm totally up for suggestions on what the best way there is to do this, since I'm new to this pattern and presentation language. <ListBox x:Name="MyListBox" ItemsSource="{Binding MyData, Mode=TwoWay}" BorderThickness="0"> <ListBox.ItemTemplate> <DataTemplate> <StackPanel Orientation="Horizontal"> <CheckBox x:Name="Visible" IsChecked="{Binding Visible, Mode=TwoWay}" Command="{Binding ElementName=MyListBox, Path=DataContext.MyCommand}" CommandParameter="{Binding ElementName=Name,Path=Text}" /> <TextBlock Text="{Binding Name}" /> </StackPanel> </DataTemplate> </ListBox.ItemTemplate> </ListBox> EDIT: Option 1 <CheckBox x:Name="Visible" IsChecked="{Binding Visible, Mode=TwoWay}" Command="{Binding ElementName=MyListBox, Path=DataContext.MyCommand}" CommandParameter="{Binding Id}" /> This option gives me just the Id, which is useful in many situations. EDIT: Option 2 <CheckBox x:Name="Visible" IsChecked="{Binding Visible, Mode=TwoWay}" Command="{Binding ElementName=MyListBox, Path=DataContext.MyCommand}" CommandParameter="{Binding}" /> This option gives me the full model, which is even useful for my particular situation.

    Read the article

  • ipad tabbar rotation

    - by MaKo
    hi, please help with this noob questions but really making me go crazy if I create a project from scratch (using windows based app) for the ipad, and add a tabbar , with firstviewController, and secondviewController, it works fine, starts in landscape mode, but in info.plist I set it to Landscape(left home button), but really in simulator starts with the button on the right side! in the FirstViewController.m (BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)interfaceOrientation { if (interfaceOrientation == UIInterfaceOrientationLandscapeLeft || interfaceOrientation == UIInterfaceOrientationLandscapeRight) return YES; else { return NO; }} so it starts in landscape, and rotates as the simulator rotates, but if I create a template app for iphone tabbar, set the info.plist Initial interface orientation Landscape (left home button) and add the code above, IT DOESNT WORK!!! simulator starts with button at left but tab bar on the side, same problem that I had with an app that Im porting from iphone to ipad, (landscape intended) I get to the landscape start mode, but the tab bar remains on the side! also the only way to make the old ported app to show the simulator on the side was with UIInterfaceOrientation UIIntefaceOrientationLandscapeLeft (didnt work with Initial interface orientation), does not let me choose the value for the key, but it shows the simulator on landscape,, so,, what can I do please to show the tab bar on landscape mode??? the tabbar from scratch was made to see if the code will work , but it didnt?? why does it work in the tab bar made from windows app and not tab bar app? I just want the tab bar to show in landscape ahhh, thanks

    Read the article

  • sending mail in rails from tutorial - outdated?

    - by Stacia
    I'm trying to use this tutorial (http://www.tutorialspoint.com/ruby-on-rails-2.1/rails-send-emails.htm) to send mail on rails, but nothing seems to happen. I have ActionMailer::Base.delivery_method = :sendmail in my environment.rb. It's possible the tutorial may be out of date for the more recent version of rails? If so can someone tell me where it goes wrong or a link to another tutorial. I see this in the log. It's a little supsicious that the "to" has subject and stuff appended to it, but I don't know where it went wrong. Processing EmailerController#sendmail (for 127.0.0.1 at 2010-03-10 19:02:21) [POST] Parameters: {"commit"=>"Send", "authenticity_token"=>"251d315cc4dfc6c58c2c7f6f633d52b101d10c14", "email"=>{"recipient"=>"[email protected]", "subject"=>"booooooo", "message"=>"aabdsaf"}} SQL (0.1ms) SET NAMES 'utf8' SQL (0.1ms) SET SQL_AUTO_IS_NULL=0 Sent mail to subject, booooooo, recipient, [email protected], message, aabdsaf Date: Wed, 10 Mar 2010 19:02:21 -0800 From: [email protected] To: [email protected] Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8 Hi! You are having one email message from [email protected] with a title This is title and following is the message: Thanks edit: I manually changed "recipient" to my mail address and I still don't get mail, even though the problem in the log with all of the things stuck together is fixed.

    Read the article

  • Windows-1251 file inside UTF-8 site?

    - by Spoonk
    Hello everyone Masters Of Web Delevopment :) I have a piece of PHP script that fetches last 10 played songs from my winamp. This script is inside file (lets call it "lastplayed.php") which is included in my site with php include function inside a "div". My site is on UTF-8 encoding. The problem is that some songs titles are in Windows-1251 encoding. And in my site they displays like "??????"... Is there any known way to tell to this div with included "lastplayed.php" in it, to be with windows-1251 encoding? Or any other suggestions? P.S: The file with fetching script a.k.a. "lastplayed.php", is converted to UTF-8. But if it is ANCII it's the same result. I try to put and meta tag with windows-1251 between head tag but nothing happens again. P.P.S: Script that fetches the Winamp's data (lastplayed.php): <?php /****** * You may use and/or modify this script as long as you: * 1. Keep my name & webpage mentioned * 2. Don't use it for commercial purposes * * If you want to use this script without complying to the rules above, please contact me first at: [email protected] * * Author: Martijn Korse * Website: http://devshed.excudo.net * * Date: 08-05-2006 ***/ /** * version 2.0 */ class Radio { var $fields = array(); var $fieldsDefaults = array("Server Status", "Stream Status", "Listener Peak", "Average Listen Time", "Stream Title", "Content Type", "Stream Genre", "Stream URL", "Current Song"); var $very_first_str; var $domain, $port, $path; var $errno, $errstr; var $trackLists = array(); var $isShoutcast; var $nonShoutcastData = array( "Server Status" => "n/a", "Stream Status" => "n/a", "Listener Peak" => "n/a", "Average Listen Time" => "n/a", "Stream Title" => "n/a", "Content Type" => "n/a", "Stream Genre" => "n/a", "Stream URL" => "n/a", "Stream AIM" => "n/a", "Stream IRC" => "n/a", "Current Song" => "n/a" ); var $altServer = False; function Radio($url) { $parsed_url = parse_url($url); $this->domain = isset($parsed_url['host']) ? $parsed_url['host'] : ""; $this->port = !isset($parsed_url['port']) || empty($parsed_url['port']) ? "80" : $parsed_url['port']; $this->path = empty($parsed_url['path']) ? "/" : $parsed_url['path']; if (empty($this->domain)) { $this->domain = $this->path; $this->path = ""; } $this->setOffset("Current Stream Information"); $this->setFields(); // setting default fields $this->setTableStart("<table border=0 cellpadding=2 cellspacing=2>"); $this->setTableEnd("</table>"); } function setFields($array=False) { if (!$array) $this->fields = $this->fieldsDefaults; else $this->fields = $array; } function setOffset($string) { $this->very_first_str = $string; } function setTableStart($string) { $this->tableStart = $string; } function setTableEnd($string) { $this->tableEnd = $string; } function getHTML($page=False) { if (!$page) $page = $this->path; $contents = ""; $domain = (substr($this->domain, 0, 7) == "http://") ? substr($this->domain, 7) : $this->domain; if (@$fp = fsockopen($domain, $this->port, $this->errno, $this->errstr, 2)) { fputs($fp, "GET ".$page." HTTP/1.1\r\n". "User-Agent: Mozilla/4.0 (compatible; MSIE 5.5; Windows 98)\r\n". "Accept: */*\r\n". "Host: ".$domain."\r\n\r\n"); $c = 0; while (!feof($fp) && $c <= 20) { $contents .= fgets($fp, 4096); $c++; } fclose ($fp); preg_match("/(Content-Type:)(.*)/i", $contents, $matches); if (count($matches) > 0) { $contentType = trim($matches[2]); if ($contentType == "text/html") { $this->isShoutcast = True; return $contents; } else { $this->isShoutcast = False; $htmlContent = substr($contents, 0, strpos($contents, "\r\n\r\n")); $dataStr = str_replace("\r", "\n", str_replace("\r\n", "\n", $contents)); $lines = explode("\n", $dataStr); foreach ($lines AS $line) { if ($dp = strpos($line, ":")) { $key = substr($line, 0, $dp); $value = trim(substr($line, ($dp+1))); if (preg_match("/genre/i", $key)) $this->nonShoutcastData['Stream Genre'] = $value; if (preg_match("/name/i", $key)) $this->nonShoutcastData['Stream Title'] = $value; if (preg_match("/url/i", $key)) $this->nonShoutcastData['Stream URL'] = $value; if (preg_match("/content-type/i", $key)) $this->nonShoutcastData['Content Type'] = $value; if (preg_match("/icy-br/i", $key)) $this->nonShoutcastData['Stream Status'] = "Stream is up at ".$value."kbps"; if (preg_match("/icy-notice2/i", $key)) { $this->nonShoutcastData['Server Status'] = "This is <span style=\"color: red;\">not</span> a Shoutcast server!"; if (preg_match("/ultravox/i", $value)) $this->nonShoutcastData['Server Status'] .= " But an <a href=\"http://ultravox.aol.com/\" target=\"_blank\">Ultravox</a> Server"; $this->altServer = $value; } } } return nl2br($htmlContent); } } else return $contents; } else { return False; } } function getServerInfo($display_array=null, $very_first_str=null) { if (!isset($display_array)) $display_array = $this->fields; if (!isset($very_first_str)) $very_first_str = $this->very_first_str; if ($html = $this->getHTML()) { // parsing the contents $data = array(); foreach ($display_array AS $key => $item) { if ($this->isShoutcast) { $very_first_pos = stripos($html, $very_first_str); $first_pos = stripos($html, $item, $very_first_pos); $line_start = strpos($html, "<td>", $first_pos); $line_end = strpos($html, "</td>", $line_start) + 4; $difference = $line_end - $line_start; $line = substr($html, $line_start, $difference); $data[$key] = strip_tags($line); } else { $data[$key] = $this->nonShoutcastData[$item]; } } return $data; } else { return $this->errstr." (".$this->errno.")"; } } function createHistoryArray($page) { if (!in_array($page, $this->trackLists)) { $this->trackLists[] = $page; if ($html = $this->getHTML($page)) { $fromPos = stripos($html, $this->tableStart); $toPos = stripos($html, $this->tableEnd, $fromPos); $tableData = substr($html, $fromPos, ($toPos-$fromPos)); $lines = explode("</tr><tr>", $tableData); $tracks = array(); $c = 0; foreach ($lines AS $line) { $info = explode ("</td><td>", $line); $time = trim(strip_tags($info[0])); if (substr($time, 0, 9) != "Copyright" && !preg_match("/Tag Loomis, Tom Pepper and Justin Frankel/i", $info[1])) { $this->tracks[$c]['time'] = $time; $this->tracks[$c++]['track'] = trim(strip_tags($info[1])); } } if (count($this->tracks) > 0) { unset($this->tracks[0]); if (isset($this->tracks[1])) $this->tracks[1]['track'] = str_replace("Current Song", "", $this->tracks[1]['track']); } } else { $this->tracks[0] = array("time"=>$this->errno, "track"=>$this->errstr); } } } function getHistoryArray($page="/played.html") { if (!in_array($page, $this->trackLists)) $this->createHistoryArray($page); return $this->tracks; } function getHistoryTable($page="/played.html", $trackColText=False, $class=False) { $title_utf8 = mb_convert_encoding($trackArr ,"utf-8" ,"auto"); if (!in_array($page, $this->trackLists)) $this->createHistoryArray($page); if ($trackColText) $output .= " <div class='lastplayed_top'></div> <div".($class ? " class=\"".$class."\"" : "").">"; foreach ($this->tracks AS $title_utf8) $output .= "<div style='padding:2px 0;'>".$title_utf8['track']."</div>"; $output .= "</div><div class='lastplayed_bottom'></div> <div class='lastplayed_title'>".$trackColText."</div> \n"; return $output; } } // this is needed for those with a php version < 5 // the function is copied from the user comments @ php.net (http://nl3.php.net/stripos) if (!function_exists("stripos")) { function stripos($haystack, $needle, $offset=0) { return strpos(strtoupper($haystack), strtoupper($needle), $offset); } } ?> And the calling script outside the lastplayed.php: include "lastplayed.php"; $radio = new Radio($ip.":".$port); echo $radio->getHistoryTable("/played.html", "<b>Last played:</b>", "lastplayed_content");

    Read the article

  • What's wrong with this code to un-camel-case a string?

    - by omair iqbal
    Here is my attempt to solve the About.com Delphi challenge to un-camel-case a string. unit challenge1; interface uses Windows, Messages, SysUtils, Variants, Classes, Graphics, Controls, Forms, Dialogs, StdCtrls; type check = 65..90; TForm1 = class(TForm) Edit1: TEdit; Button1: TButton; procedure Button1Click(Sender: TObject); private { Private declarations } public { Public declarations } end; var Form1: TForm1; var s1,s2 :string; int : integer; implementation {$R *.dfm} procedure TForm1.Button1Click(Sender: TObject); var i: Integer; checks : set of check; begin s1 := edit1.Text; for i := 1 to 20 do begin int :=ord(s1[i]) ; if int in checks then insert(' ',s1,i-1); end; showmessage(s1); end; end. check is a set that contains capital letters so basically whenever a capital letter is encountered the insert function adds space before its encountered (inside the s1 string), but my code does nothing. ShowMessage just shows text as it was entered in Edit1. What have I done wrong?

    Read the article

  • Legitimate uses of the Function constructor

    - by Marcel Korpel
    As repeatedly said, it is considered bad practice to use the Function constructor (also see the ECMAScript Language Specification, 5th edition, § 15.3.2.1): new Function ([arg1[, arg2[, … argN]],] functionBody) (where all arguments are strings containing argument names and the last (or only) string contains the function body). To recapitulate, it is said to be slow, as explained by the Opera team: Each time […] the Function constructor is called on a string representing source code, the script engine must start the machinery that converts the source code to executable code. This is usually expensive for performance – easily a hundred times more expensive than a simple function call, for example. (Mark ‘Tarquin’ Wilton-Jones) Though it's not that bad, according to this post on MDC (I didn't test this myself using the current version of Firefox, though). Crockford adds that [t]he quoting conventions of the language make it very difficult to correctly express a function body as a string. In the string form, early error checking cannot be done. […] And it is wasteful of memory because each function requires its own independent implementation. Another difference is that a function defined by a Function constructor does not inherit any scope other than the global scope (which all functions inherit). (MDC) Apart from this, you have to be attentive to avoid injection of malicious code, when you create a new Function using dynamic contents. Lots of disadvantages and it is intelligible that ECMAScript 5 discourages the use of the Function constructor by throwing an exception when using it in strict mode (§ 13.1). That said, T.J. Crowder says in an answer that [t]here's almost never any need for the similar […] new Function(...), either, again except for some advanced edge cases. So, now I am wondering: what are these “advanced edge cases”? Are there legitimate uses of the Function constructor?

    Read the article

  • SQL to CodeIgniter Array Missing Data Issue

    - by SamD
    $query = $this->db->query("SELECT t1.numberofbets, t1.profit, t2.seven_profit, t3.28profit, user.user_id, username, password, email, balance, user.date_added, activation_code, activated FROM user LEFT JOIN (SELECT user_id, SUM(amount_won) AS profit, count(tip_id) AS numberofbets FROM tip GROUP BY user_id) as t1 ON user.user_id = t1.user_id LEFT JOIN (SELECT user_id, SUM(amount_won) AS seven_profit FROM tip WHERE date_settled > '$seven_daystime' GROUP BY user_id) as t2 ON user.user_id = t2.user_id LEFT JOIN (SELECT user_id, SUM(amount_won) AS 28profit FROM tip WHERE date_settled > '$twoeight_daystime' GROUP BY user_id) as t3 ON user.user_id = t3.user_id where activated = 1 GROUP BY user.user_id ORDER BY user.date_added DESC"); return $query->result_array(); The query works fine running it in phpMyAdmin and returns complete results (in image attached). However, printing the array in CodeIgniter, it has no value for one field ,seven_profit, where it is there in the SQL query ran in phpMyAdmin, just the discrepancy in this one field, from sql to php array... I just can’t see why, when printing the array, that one field, which should have value of 26, contains nothing? Any ideas? I changed the field name from starting with a number in attempt to fix it, but no difference. I know this is complex and looks horrible, any help or just people coming across something similar would be great to know about, thanks. Sam

    Read the article

  • iPhone application update (using Core Data on Sqlite)

    - by owen
    I have an app which is using Core Data on Sqlite, Now I have a update which has some DB structure changes say adding a new table I know when an app get updated, it updates the app binary only, nothing on document directory will be changed. When the app gets updated and launchs at the first time and run [[NSPersistentStoreCoordinator alloc] initWithManagedObjectModel:[self managedObjectModel]]; It will find the difference between the data model and DB structure in Sqlite and will throw an exception and quit. Error: "The model used to open the store is incompatible with the one used to create the store" So, can anyone here give me some idea how to update an app when there is a DB structure change? I think we can run a DB script to create that new table when it launchs the update at the first time. But if there are other changes like changing the type of some fields or deleting some fields, and we need to migrate the old data, this is really a headache. In this case, Is the only way to do is creating a new app? Is there anyone tried something similar like this?

    Read the article

  • What's the best way to select max over multiple fields in SQL?

    - by allyourcode
    The I kind of want to do is select max(f1, f2, f3). I know this doesn't work, but I think what I want should be pretty clear (see update 1). I was thinking of doing select max(concat(f1, '--', f2 ...)), but this has various disadvantages. In particular, doing concat will probably slow things down. What's the best way to get what I want? update 1: The answers I've gotten so far aren't what I'm after. max works over a set of records, but it compares them using only one value; I want max to consider several values, just like the way order by can consider several values. update 2: Suppose I have the following table: id class_name order_by1 order_by_2 1 a 0 0 2 a 0 1 3 b 1 0 4 b 0 9 I want a query that will group the records by class_name. Then, within each "class", select the record that would come first if you ordered by order_by1 ascending then order_by2 ascending. The result set would consist of records 2 and 3. In my magical query language, it would look something like this: select max(* order by order_by1 ASC, order_by2 ASC) from table group by class_name

    Read the article

  • Undefined method `add' on a cucumber step that usually works.

    - by Josiah Kiehl
    I have a path defined: when /the admin home\s?page/ "/admin/" I have scenario that is passing: Scenario: Let admins see the admin homepage Given "pojo" is logged in And "pojo" is an "admin" And I am on the admin home page Then I should see "Hi there." And I have a scenario that is failing: Scenario: Review flagged photo Given "pojo" is logged in And "pojo" is an "admin" ...bunch of steps that create stuff in the database... And I am on the admin home page Then ... the rest of the steps The step that fails in the second one is "And I am on the admin home page" which passes just fine in the first scenario. Here's the error I get: And I am on the admin home page # features/step_definitions/web_steps.rb:18 undefined method `add' for {}:Hash (NoMethodError) ./app/controllers/admin_controller.rb:13:in `index' ./app/controllers/admin_controller.rb:11:in `each' ./app/controllers/admin_controller.rb:11:in `index' /usr/lib/ruby/1.8/benchmark.rb:308:in `realtime' ./features/step_definitions/web_steps.rb:19:in `/^(?:|I )am on (.+)$/' features/admin.feature:52:in `And I am on the admin home page' This is very odd... why would it be fine in the first case, and not in the second where the only difference are a bunch of steps that create records in the db? [edit] Here's the add stuff to database step: Given /^there is a "([^\"]*)" with the following:$/ do |model, table| model.constantize.create!(table.rows_hash) end

    Read the article

  • Fastcgi 500 error on preg_match_all in PHP

    - by Bertvan
    Hi, I'm trying to set up some exotic PHP code (I'm no expert), and I get a FastCGI Error 500 on a PHP line containing 'preg_match_all'. When I comment out the line, the page is returned with a 200 (but not how it was meant to be). The code is parsing php, html and javascript content loaded from the database and is composing them to return the finished page. Now, by placing around some error_log entries I could determine that the line with the preg_match_all is the cause of the 500. However the line is hit multiple times during the loading of the page and on other occasions, the line does not cause an error. Here's how it looks like exactly: preg_match_all ("/(<([\w]+)[^>]*>)((?:.|\n)*)(<\/\\2>)/", $part['data'], $tags, PREG_PATTERN_ORDER|PREG_OFFSET_CAPTURE); The subject string is a piece of text that looks like: <script> ... some javascript functions ... </script> [Edit:] This is code that is up and running correctly elsewhere, so this very well could be a PHP setting or environment difference. I'm using PHP 5.2.13 on IIS6 with FastCGI. [Edit:] Nothing is mentioned in the log files. At least not in the ones I checked: IIS Logs Event Logs PHP Log Any thoughts or direction would be welcome.

    Read the article

< Previous Page | 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030  | Next Page >