Search Results

Search found 59643 results on 2386 pages for 'data migration'.

Page 1029/2386 | < Previous Page | 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036  | Next Page >

• How to setup Database Permissions on SqlServer Express 2008

  - by Timo Willemsen

  I'm using a code-first approach of using the Entity Framework. When I first run the application it will try to create the database matching my MVC models. However, it doesn't have permission to create it I think. I get the following error: CREATE DATABASE permission denied in database 'master'. What user is trying to access the SqlServer and how can I add it's permissions to let it work? This is the connectionstring I'm using (which should be right...) <add name="ContextDb" connectionString="data source=.\SQLEXPRESS;Integrated Security=SSPI;initial catalog=ContextDb" providerName="System.Data.SqlClient"/> Cheers

  Read the article

• How to make ssh/rsync/etc use a VLAN network interface?

  - by Annan

  A company I work for has a number of virtual servers with ElasticHosts. They are setup in such a way that eth1 is on a private VLAN connecting them to each other. This is so backups sent between servers are not charged at the same rate as external data transfer. My understanding of how VLANs and network interfaces work is sketchy at best. How can I make ssh, rsync, etc. transfer data through the VLAN? My final solution: I spent a while trying to figure this out, For all servers involved, edit /etc/sysconfig/network-scripts/ifcfg-eth1 DEVICE=eth1 BOOTPROTO=static ONBOOT=yes HWADDR=YOUR_MAC_ADDR IPADDR=192.168.0.100 NETMASK=255.255.255.0 Where HWADDR should already be set and the last octate of IPADDR should be different from each other. Then run, on all servers /etc/init.d/network restart After this the IP addresses specified by IPADDR can be used directly as any other IP address.

  Read the article

• Using Gentoo's `ebegin`, `eend` etc under Ubuntu

  - by Marcus Downing

  We're quite fond of the style of the ebegin, eend, eerror, eindent etc commands used by Portage and other tools on Gentoo. The green-yellow-red bullets and standard layout make for very quick spotting of errors, on what would otherwise be very grey command line output. #!/bin/sh source /etc/init.d/functions.sh ebegin "Copying data" rsync .... eend $? Producing output similar to: * Copying data... [ OK ] As a result we're using these commands in some of our common shell scripts, which is a problem for the people using Ubuntu and other linuxes. (linuces? linuxen? linucae? other distros) On Gentoo these functions are provided by OpenRC, and imported with functions.sh file (whose exact position seems to vary slightly). But is there a simple way of getting these commands on Ubuntu? In theory we could replace them all with dull echos, but we'd rather not?

  Read the article

• Cacti is not monitoring the correct host... How do I change SNMP target?

  - by wil

  I have been handed a Cacti server that monitors a few hosts. I noticed that three of the targets were displaying the exact same data - the cacti machine, machine a and machine b. After doing a bit of digging, I noticed that machine a and machine b had "Local Linux Machine" set under "Host Template". I have since changed the host template to "Generic SNMP-enabled Host", however, all the graphs still only display data from the local cacti machine (Updates every 5 minutes - I changed this yesterday - 12 hours). I can't think what else is wrong and was wondering if anyone knows/can recommend anything?

  Read the article

• How to get partition information from non-booting server?

  - by gravyface

  Need to manually rebuild a mirrored array on a server and am in the process of reinstalling SBS 2003 on it. However, it's a Dell server, and know that there's the Dell FAT32 diagnostics partition, a system partition, and a data partition, but do not know the size of each. Planning on reinstalling SBS 2003, all applications on the server, and then doing a System State restore, but figured that not having the correct partitions will cause some grief: am I right? Almost thinking that the size of the partitions shouldn't matter, but not positive. Question: should I care about the size of the partition? If so, how can I get this partition information from a non-booting drive? We have an Acronis image of the one working disk and the partitions are mounted/viewable in Explorer on a workstation, but I'm not sure where the Logical Disk Manager/Disk Management data is stored and/or if there's a way to retrieve it without having a working Windows installation.

  Read the article

• Corosync :: Restarting some resources after Lan connectivity issue

  - by moebius_eye

  I am currently looking into corosync to build a two-node cluster. So, I've got it working fine, and it does what I want to do, which is: Lost connectivity between the two nodes gives the first node '10node' both Failover Wan IPs. (aka resources WanCluster100 and WanCluster101 ) '11node' does nothing. He "thinks" he still has his Failover Wan IP. (aka WanCluster101) But it doesn't do this: '11node' should restart the WanCluster101 resource when the connectivity with the other node is back. This is to prevent a condition where node10 simply dies (and thus does not get 11node's Failover Wan IP), resulting in a situation where none of the nodes have 10node's failover IP because 10node is down 11node has "given back" his failover Wan IP. Here's the current configuration I'm working on. node 10sch \ attributes standby="off" node 11sch \ attributes standby="off" primitive LanCluster100 ocf:heartbeat:IPaddr2 \ params ip="172.25.0.100" cidr_netmask="32" nic="eth3" \ op monitor interval="10s" \ meta is-managed="true" target-role="Started" primitive LanCluster101 ocf:heartbeat:IPaddr2 \ params ip="172.25.0.101" cidr_netmask="32" nic="eth3" \ op monitor interval="10s" \ meta is-managed="true" target-role="Started" primitive Ping100 ocf:pacemaker:ping \ params host_list="192.0.2.1" multiplier="500" dampen="15s" \ op monitor interval="5s" \ meta target-role="Started" primitive Ping101 ocf:pacemaker:ping \ params host_list="192.0.2.1" multiplier="500" dampen="15s" \ op monitor interval="5s" \ meta target-role="Started" primitive WanCluster100 ocf:heartbeat:IPaddr2 \ params ip="192.0.2.100" cidr_netmask="32" nic="eth2" \ op monitor interval="10s" \ meta target-role="Started" primitive WanCluster101 ocf:heartbeat:IPaddr2 \ params ip="192.0.2.101" cidr_netmask="32" nic="eth2" \ op monitor interval="10s" \ meta target-role="Started" primitive Website0 ocf:heartbeat:apache \ params configfile="/etc/apache2/apache2.conf" options="-DSSL" \ operations $id="Website-one" \ op start interval="0" timeout="40" \ op stop interval="0" timeout="60" \ op monitor interval="10" timeout="120" start-delay="0" statusurl="http://127.0.0.1/server-status/" \ meta target-role="Started" primitive Website1 ocf:heartbeat:apache \ params configfile="/etc/apache2/apache2.conf.1" options="-DSSL" \ operations $id="Website-two" \ op start interval="0" timeout="40" \ op stop interval="0" timeout="60" \ op monitor interval="10" timeout="120" start-delay="0" statusurl="http://127.0.0.1/server-status/" \ meta target-role="Started" group All100 WanCluster100 LanCluster100 group All101 WanCluster101 LanCluster101 location AlwaysPing100WithNode10 Ping100 \ rule $id="AlWaysPing100WithNode10-rule" inf: #uname eq 10sch location AlwaysPing101WithNode11 Ping101 \ rule $id="AlWaysPing101WithNode11-rule" inf: #uname eq 11sch location NeverLan100WithNode11 LanCluster100 \ rule $id="RAND1083308" -inf: #uname eq 11sch location NeverPing100WithNode11 Ping100 \ rule $id="NeverPing100WithNode11-rule" -inf: #uname eq 11sch location NeverPing101WithNode10 Ping101 \ rule $id="NeverPing101WithNode10-rule" -inf: #uname eq 10sch location Website0NeedsConnectivity Website0 \ rule $id="Website0NeedsConnectivity-rule" -inf: not_defined pingd or pingd lte 0 location Website1NeedsConnectivity Website1 \ rule $id="Website1NeedsConnectivity-rule" -inf: not_defined pingd or pingd lte 0 colocation Never -inf: LanCluster101 LanCluster100 colocation Never2 -inf: WanCluster100 LanCluster101 colocation NeverBothWebsitesTogether -inf: Website0 Website1 property $id="cib-bootstrap-options" \ dc-version="1.1.7-ee0730e13d124c3d58f00016c3376a1de5323cff" \ cluster-infrastructure="openais" \ expected-quorum-votes="2" \ no-quorum-policy="ignore" \ stonith-enabled="false" \ last-lrm-refresh="1408954702" \ maintenance-mode="false" rsc_defaults $id="rsc-options" \ resource-stickiness="100" \ migration-threshold="3" I also have a less important question concerning this line: colocation NeverBothLans -inf: LanCluster101 LanCluster100 How do I tell it that this collocation only applies to '11node'.

  Read the article

• Export and import a PostgreSQL database with a different name?

  - by J. Pablo Fernández

  Is there a way to export a PostgreSQL database and later import it with another name? I'm using PostgreSQL with Rails and I often export the data from production, where the database is called blah_production and import it on development or staging with names blah_development and blah_staging. On MySQL this is trivial as the export doesn't have the database anywhere (except a comment maybe), but on PostgreSQL it seems to be impossible. Is it impossible? I've seen out there some people using sed scripts to modify the dump. I'd like to avoid that solution but if there are no alternative I'll take it. Has anybody wrote a script to alter the dump's database name ensure no data is ever altered?

  Read the article

• Script/ Macro in Excel, by clicking on a cell

  - by Noob Doob

  There's something I want to do in Excel 2010. Specifically, I want to be able to make the open sheet load data from a text file, by clicking -important- on a cell of the current open worksheet. So my specific needs are: If it is possible in some way, to start a macro/script by clicking on a cell. About the script/macro: What would be the preferable, by your opinion, way of implementation. And more specifically, how to automatically import the data needed, only by clicking, without having to continually specify the desirable .txt file each time, only 1 time at max, at start or by using a custom "initalization/configuration" file.

  Read the article

• Has anyone achieved true differential sync with rsync in ESXi?

  - by Julius

  Berate me later on the fact that I'm using the service console to do anything in ESXi... I've got a working rsync binary (v3.0.4) that I can use in ESXi 4.1U1. I tend to use rsync over cp when copying VM's or backups from one local datastore to another local datastore. I've used rsync to copy data from one ESXi box to another but that was just for small files. In now trying to do true differential syncs of backups taken via ghettoVCB between my primary ESXi machine and a secondary one. But even when I do this locally (one datastore to another datastore on the same ESXi machine) rsync appears to copy the files in their entirety. I've got two VMDK's totally 80GB in size, and rsync still takes anywhere between 1 and 2 hours but the VMDK's aren't growing that much daily. Below is the rsync command I'm executing. I am copying locally because ultimately these files will get copied onto a datastore created from a LUN on a remote system. Its not an rsync that'll be serviced by an rsync daemon on a remote system. rsync -avPSI VMBACKUP_2011-06-10_02-27-56/* VMBACKUP_2011-06-01_06-37-11/ --stats --itemize-changes --existing --modify-window=2 --no-whole-file sending incremental file list >f..t...... VM-flat.vmdk 42949672960 100% 15.06MB/s 0:45:20 (xfer#1, to-check=5/6) >f..t...... VM.vmdk 556 100% 4.24kB/s 0:00:00 (xfer#2, to-check=4/6) >f..t...... VM.vmx 3327 100% 25.19kB/s 0:00:00 (xfer#3, to-check=3/6) >f..t...... VM_1-flat.vmdk 42949672960 100% 12.19MB/s 0:56:01 (xfer#4, to-check=2/6) >f..t...... VM_1.vmdk 558 100% 2.51kB/s 0:00:00 (xfer#5, to-check=1/6) >f..t...... STATUS.ok 30 100% 0.02kB/s 0:00:01 (xfer#6, to-check=0/6) Number of files: 6 Number of files transferred: 6 Total file size: 85899350391 bytes Total transferred file size: 85899350391 bytes Literal data: 2429682778 bytes Matched data: 83469667613 bytes File list size: 129 File list generation time: 0.001 seconds File list transfer time: 0.000 seconds Total bytes sent: 2432530094 Total bytes received: 5243054 sent 2432530094 bytes received 5243054 bytes 295648.92 bytes/sec total size is 85899350391 speedup is 35.24 Is this because ESXi is itself making so many changes to the VMDK's that as far as rsync is concerned the entire file has to be retransmitted? Has anyone actually achieved actual diff sync with ESXi?

  Read the article

• How to fill in the network line in the ubuntu interfaces config file?

  - by matnagel

  I have to configure an ubuntu hardy server network interface. The service hoster told me that this is the network data for the machine: IP Range: 111.111.200.74 to 111.111.200.78 Netmask: 255.255.255.248 Broadcast: 111.111.200.79 Gateway: 111.111.200.73 Subnet: 111.111.200.72/29 I am only using the first IP address. I will update the /etc/hosts file with 111.111.200.74, but I am still unsure how the /etc/network/interfaces file should be. This is my plan: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 111.111.200.74 netmask 255.255.255.248 network 111.111.200.??? broadcast 111.111.200.79 gateway 111.111.200.73 As you can see I don't know how to build the network line. How would I calculate the data for the network line and what is the result? (I changed the first 2 octets of the subnet, they are not "111.111" in the real setup.)

  Read the article

• SharePoint Web Analytics not tracking usage for main application

  - by Chris W

  My SP 2010 setup is two separate applications - one for the main portal and one for MySite. Whilst WebAnalytics is tracking usage of MySite it's not showing any stats for the main Portal. The only thing it lists is the number of site collections but no page views etc. The WA service is clearly running to pick up data for MySite. In Configure web analytics and health data collection everything is ticked. I can't find any obvious settings that are different between the two applications. Where should I look to get usage tracking correctly?

  Read the article

• Any way to void document upload when user cancels?

  - by Michael Broschat

  We have developed a set of metadata fields for the user to complete during the file upload process (MOSS). What happens is that the user chooses Upload, then specifies the file on his system. Sometimes, when he sees what metadata data is required, he clicks Cancel, knowing that he cannot supply the data at that time. The file uploads, anyway, and is in the library without any attached metadata. Our client finds this unacceptable, but I haven't found a way to cancel the actual upload when the user tells us he no longer wants to do so.

  Read the article

• How to upgrade a single instance's size without downtime

  - by Justin Meltzer

  I'm afraid there may not be a way to do this since we're not load balancing, but I'd like to know if there is any way to upgrade an EC2 EBS backed instance to a larger size without downtime. First of all, we have everything on one instance: both our app and our database (mongodb). This is along the lines i'm thinking: I know you can create snapshots of your EBS and an AMI of your instance. We already have an AMI and we create hourly snapshots. If I spin up a new separate instance of a larger size and then implement (not sure what the right term is here) the snapshots so that our database is up to date, then I could switch the A record of our domain from the old ip address to the new one. However, I'm afraid that after copying over the data from the snapshot, by the time it takes to change the A record and have that change propagate, the data could potentially be stale. Is there a way to prevent this, and is there a better way to do this than I am suggesting?

  Read the article

• losetup does not decrypt device in Ubuntu 11.4 as before

  - by Kay

  I had an external volume mounted using losetup for about two years. It was created using Ubuntu 9.4 and I used the same Ubuntu installation throughout all dist upgrades. Now as I bought a new laptop I set up a fresh Ubuntu 11.4 installation on it. Problem is: losetup -e twofish /dev/loop0 /dev/sdb2 does not decrypt the volume anymore. The data in /dev/loop0 contains apparently random data. I am sure I entered the correct password. I modprobe'd cryptoloop and twofish. My question is: Has Canonical done some obscure changes to losetup like adding a salt? Does losetup depend on configuration files I did not know about? How can I decrypt the volume on my now laptop?

  Read the article

• store image installation error in UEC

  - by selvakumar

  to my college final year project we planned to setup the private cloud on the two machines. I recently installed Ubuntu Enterprise Cloud (UEC) on two of my machines . I was trying to install the store image through WebUI. I was able to download Ubuntu 10.04 - (i386) image but while installing, it's giving me following error: - Command 'euca-upload-bundle' returned status code 1: Checking bucket: image-store-1296600766 Traceback (most recent call last): File "/usr/bin/euca-upload-bundle", line 231, in main() File "/usr/bin/euca-upload-bundle", line 214, in main bucket_instance = ensure_bucket(conn, bucket, canned_acl) File "/usr/bin/euca-upload-bundle", line 87, in ensure_bucket bucket_instance = connection.get_bucket(bucket) File "/usr/lib/pymodules/python2.6/boto/s3/connection.py", line 275, in get_bucket rs = bucket.get_all_keys(headers, maxkeys=0) File "/usr/lib/pymodules/python2.6/boto/s3/bucket.py", line 204, in get_all_keys headers=headers, query_args=s) File "/usr/lib/pymodules/python2.6/boto/s3/connection.py", line 342, in make_request data, host, auth_path, sender) File "/usr/lib/pymodules/python2.6/boto/connection.py", line 459, in make_request return self._mexe(method, path, data, headers, host, sender) File "/usr/lib/pymodules/python2.6/boto/connection.py", line 437, in _mexe raise e socket.error: [Errno 110] Connection timed out could anyone please help me?

  Read the article

• Get active network interface on Windows

  - by Kevin Walzer

  I'm developing an application that provides a UI to windump, the packet sniffer. Windump has a "-D" parameter that lists all network interfaces it can find, and then you can specify which interface to listen on. However, I'd like to avoid forcing the user to manually configure which interface to listen on. On Unix, I can obtain the right network interface (en0, en1, etc.) via a call to ifconfig and some parsing of the output, but I cannot locate any equivalent Windows API or command that can yield similar information--ipconfig doesn't seem to obtain this data. Can anyone suggest either a Windows command-line tool or an API that can be called via VBScript to obtain this data so that I don't have to present the user with a dialog in my GUI telling them to select the right interface?

  Read the article

• Looking for a lightweight backup tool for Linux

  - by Nick McCowin

  I'm running Arch Linux and looking for a simple, lightweight backup tool so I don't have to worry about losing my critical data.

  Read the article

• How to repair unbootable Fedora install

  - by Cerin

  How do you repair/reinstall Fedora without deleting any existing partitions or data? I was attempting to upgrade some old Fedora 13 servers to 17, following the instructions in the wiki. After the 14-15 upgrade, rebooting resulted in the output: Dropping to debug shell. sh: can't access tty; job control turned off dracut:/# Running dmesg also shows: dracut Warning: No root device "block:/dev/mapper/VolGroup-lv_root" found Googling shows this error is typically related to some weird RAID issues, but my server is a virtual machine not using any RAID. Using a rescue CD, I can chroot /mnt/sysimage, and all packages and data still seems to be there. How do I make the system bootable again?

  Read the article

• VSFTPD uploaded file permissions

  - by Katafalkas

  Let me first say that there are loads of topics regarding this, and I am sure i have seen them all by now. Still non of the solutions seem to help. I installed vsftpd. created a user ftp-data. Now I need that files uploaded by user ftp-data would have 755 permissions. Solving this should be as easy as adding: local_umask=002 file_open_mode=0755 but that did not help, then I have tried a number of variations of this, still did not help. The I added: chmod_enable=YES still did not help. At the moment I think that I am missing something very simple and obvious, just cant find it. Maybe someone could help me to find what I am missing. This is my config file: anonymous_enable=NO local_enable=YES write_enable=YES local_umask=002 anon_upload_enable=NO anon_mkdir_write_enable=NO dirmessage_enable=NO xferlog_enable=YES connect_from_port_20=YES xferlog_file=/var/log/xferlog listen=YES local_root=/var/www/ftp-gallery pam_service_name=vsftpd userlist_enable=YES tcp_wrappers=YES

  Read the article

• What parameters to mdadm, to re-create md device with payload starting at 0x22000 position on backing storage?

  - by Adam Ryczkowski

  I try to recover from mdadm raid disaster, which happened when moving from ubuntu server 10.04 to 12.04. I know the correct order of devices from dmesg log, but given this information, I still cannot access the data. The superblocks look messy; the mdadm --examine for each disk is on this question on askubuntu By inspecting the raw contents of backing storage, I found the beginning of my data (the LUKS container in my case) at position 0x22000 relative to the beginning of the first partition in the raid. Question: What is the combination of options issued to "mdadm --create" to re-create mdadm that starts with the given offset? Bitmap size? PS. The relevant information from syslog when the system was healthy are pasted here.

  Read the article

• busybox does not display the throughput value at the end of a FTP session?

  - by rockyurock

  Hello, why busybox does not display the throughput value at the end of a FTP session? Or it is some version specific ? i heard that some version of busybox displays Tput value at the end of data transfer but i know that specific version .. i typed the below command but i did not get any throughput status.. "busybox ftpget -v -u user -p Password ip abc.txt abc.txt" could anybody please let me know how can i get the tput value for UL/DL data transfer? Also how can we get the status of Tput value at the client side if we do busybox ftpput operation?? regds rocky

  Read the article

• Can not RDP to Win 2003 box or initiate remote restart

  - by Richard West

  I've got a Windows 2003 server that's at my remote data center. This morning I tried to connect to it via RDP, but the connection fails with the following error: This computer can't connect to the remote computer. Try connecting again. If the problem continues, contact the owner of the remote computer or your network administrator. I have also trying issuing a remote shutdown/restart command using the "shutdown -i" command from my local system. No error is reported, however the system does not reboot. This server runs SQL Server 2005 and it is still fully operational and responsive to queries. I can also remotely connect to the services control panel of the remote system. Is there anything that I can try to regain control of the system, short of having an operator in the data center do a hard reboot on the server for me?

  Read the article

• Tail the filename, not the file

  - by Craig Walker

  In UNIX (OS X BSD to be precise), I have a "tail -f" command on a log file. From time to time I want to delete this log file so I can more easily review it in my text editor. I delete the file, and then my program recreates it after new activity. However, my tail command (and anything else that was watching the old log file) doesn't update; it's still watching the old, deleted log file. I think I understand why this is (file names simply being pointers to blocks of file data). I'd like to know how I can work around this. Ideally, my tail command (and anything else I point to the file) would be able to read the data from the new file when the file name has been deleted and recreated. How would I do this?

  Read the article

• Generating documents with templating from a form

  - by Anna

  Hello, I would like to create a document generator with templating. The workflow should be as following: The user input data to a static form (simple text input). The user chooses a graphically designed template. A document with the chosen template containing the user data is generated. The initial templates repository is prepared in advance, but it should be easy to add new templates to the process. I have the full MS Office suite and the preferred file format is an MS .doc. I can do a little VB scripting if needed, but I prefer not to. Any advice would be greatly appreciated. Thank you, Anna

  Read the article

• Building new GIS Workstation - is it worth upgrading to a workstation GPU?

  - by bsigrist

  We are currently building a machine from scratch to act as a GIS workstation. The primary software used is ESRI's ArcGIS and we are mainly working with vector data using raster data only for contextual background imagery. In the past I have built a GIS machine and used a consumer grade gaming GPU (Nvidia 9800GT) and found it to perform fine. However, I have always wondered if I would have been better off equipping it with a workstation GPU such as a Quadro series. Would a workstation GPU make a noticeable difference doing 2D GIS operations or should I save money on the build and equip it with another 9800GT?

  Read the article

< Previous Page | 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036  | Next Page >