Search Results

Search found 5001 results on 201 pages for 'mailing lists'.

Page 104/201 | < Previous Page | 100 101 102 103 104 105 106 107 108 109 110 111  | Next Page >

• Windows XP does not list WPA wireless networks

  - by Tomalak

  What can be the reason that Windows XP does not show WPA-encrypted wireless networks? The laptop I have problems with is an older model (Toshiba Satellite Pro 6100) with Windows XP SP3 on it, fresh install. The wireless network card in it is an Agere product that lists as "Toshiba Wireless LAN Mini PCI Card". The networks showed up perfectly before I first tried to connect to one (it was set to WPA2). The connection failed (the card supports WPA only), then something must have happend and Windows hides these networks now. A manually configured WPA setup via Windows' own wizard works, I'm using it right now. The network just won't show up in the list of available network on its own. I suspect that XP incorrectly set a flag somewhere that this network card does not support WPA. Is there such a flag, and if so, how can I change it back?

  Read the article

• fdisk -l only displays boot partition

  - by Franklin

  I have a SAN, and it's able to read and write to the 50TB RAID just fine, but when I run fdisk -l it only lists the boot partition of the SAN server, and doesn't display anything about the other partitions on the RAID. I've also tried using parted -l with the same result. Now when I type mount it shows that the partitions are mounted just fine. I've never seen this happen. The box is running Openfiler 2.3 (I know it's old, we're in the process of upgrading all our old equipment). We have another SAN that's configured almost identically, and it's able to display the partition info with either of the two commands I mentioned above.

  Read the article

• Ubuntu error: no candidate ver

  - by codedude

  Ok...so for some reason by Ubuntu 10.04 partition won't startup anymore. I'm not exactly sure what I did. I have the feeling that I accidentally removed some important packages. However, when I startup in Recovery Mode and select "dpkg: repair broken packages" I get this output: rm: cannot remove /var/lib/apt/lists/partial/*': No such file or directory rm: cannot remove/var/cache/apt/archives/partial/*': No such file or directory Reading Cache Reading Package lists: Done Reading State Information: Done Reading State Information: Done Reading State Information: Done No candidate ver: libisc44 No candidate ver: readahead No candidate ver: libdirectfb-1.0-0 No candidate ver: upstart-logd No candidate ver: libparted1.8-10 No candidate ver: libflickrnet2.1.5-cil No candidate ver: libicu38 No candidate ver: fast-user-switch-applet No candidate ver: linux-restricted-modules-2.6.28-11-generic No candidate ver: libnm-util0 No candidate ver: libwebkit-1.0-1 No candidate ver: libopal3.6.1 No candidate ver: libbind9-40 No candidate ver: linux-restricted-modules-common No candidate ver: upstart-compat-sysv No candidate ver: linux-restricted-modules-2.6.28-13-generic No candidate ver: chromium-browser No candidate ver: libisc45 No candidate ver: belocs-locales-bin No candidate ver: libxcb-xlib0 No candidate ver: libpoppler4 No candidate ver: libpulsecore9 No candidate ver: libpulsecore5 No candidate ver: linux-image-2.6.28-15-generic No candidate ver: libntfs-3g49 No candidate ver: libisccfg40 No candidate ver: libavahi-core5 No candidate ver: linux-restricted-modules-2.6.27-7-generic No candidate ver: libparted1.8-9 No candidate ver: libmagickwand1 No candidate ver: libwvstreams4.4-base No candidate ver: linux-image-2.6.28-14-generic No candidate ver: libraw1394-8 No candidate ver: libdatrie0 No candidate ver: libboost-program-options1.35.0 No candidate ver: libgnomekbdui3 No candidate ver: libsgutils1 No candidate ver: libass1 No candidate ver: linux-restricted-modules-2.6.28-15-generic No candidate ver: libindicate1 No candidate ver: libgnomekbd3 No candidate ver: system-services No candidate ver: linux-image-2.6.28-13-generic No candidate ver: libmagick10 No candidate ver: libcolamd-3.2.0 No candidate ver: desktop-effects-kde No candidate ver: picasa No candidate ver: libgnome-desktop-2-7 No candidate ver: libntfs-3g28 No candidate ver: libxklavier12 No candidate ver: libgpod3 No candidate ver: libmagickcore1 No candidate ver: libffado0 No candidate ver: libzephyr3 No candidate ver: libuniconf4.4 No candidate ver: libmbca0 No candidate ver: liblwres40 No candidate ver: hotkey-setup No candidate ver: libkrb53 No candidate ver: ttf-bitstream-vera No candidate ver: libee12-2 No candidate ver: libopal-2.2 No candidate ver: songbird No candidate ver: plib1.8.4c2 No candidate ver: linux-image-2.6.27-7-generic No candidate ver: libpoppler3 No candidate ver: google-chrome-unstable No candidate ver: linux-image-2.6.28-11-generic No candidate ver: linux-restricted-modules-2.6.28-14-generic No candidate ver: simgear1.0.0 No candidate ver: libpoppler-glib3 No candidate ver: mono-common No candidate ver: libx264-65 No candidate ver: libwvstreams4.4-extras No candidate ver: libdns43 No candidate ver: libnm-glib0 No candidate ver: libpt2.6.1 No candidate ver: libisccc40 No candidate ver: libdns45 No candidate ver: libisc44 No candidate ver: readahead No candidate ver: libdirectfb-1.0-0 No candidate ver: upstart-logd No candidate ver: libparted1.8-10 No candidate ver: libflickrnet2.1.5-cil No candidate ver: libicu38 No candidate ver: fast-user-switch-applet No candidate ver: linux-restricted-modules-2.6.28-11-generic No candidate ver: libnm-util0 No candidate ver: libwebkit-1.0-1 No candidate ver: libopal3.6.1 No candidate ver: libbind9-40 No candidate ver: linux-restricted-modules-common No candidate ver: upstart-compat-sysv No candidate ver: linux-restricted-modules-2.6.28-13-generic No candidate ver: chromium-browser No candidate ver: libisc45 No candidate ver: belocs-locales-bin No candidate ver: libxcb-xlib0 No candidate ver: libpoppler4 No candidate ver: libpulsecore9 No candidate ver: lipulsecore5 No candidate ver: linux-image-2.6.28-15-generic No candidate ver: libntfs-3g49 No candidate ver: libisccfg40 No candidate ver: libavahi-core5 No candidate ver: linux-restricted-modules-2.6.27-7-generic No candidate ver: libparted1.8-9 No candidate ver: libmagickwand1 No candidate ver: linux-image-2.6.28-14-generic No candidate ver: libraw1394-8 No candidate ver: libdatrie0 No candidate ver: libboost-program-options1.35.0 No candidate ver: libgnomekbdui3 No candidate ver: libsgutils1 No candidate ver: libass1 No candidate ver: linux-restricted-modules-2.6.28-15-generic No candidate ver: libindicate1 No candidate ver: libgnomekbd3 No candidate ver: system-services No candidate ver: linux-image-2.6.28-13-generic No candidate ver: libmagick10 No candidate ver: libcolamd-3.2.0 No candidate ver: desktop-effects-kde No candidate ver: picasa No candidate ver: libgnome-desktop-2-7 No candidate ver: libntfs-3g28 No candidate ver: libxklavier12 No candidate ver: libgpod3 No candidate ver: libmagickcore1 No candidate ver: libffado0 No candidate ver: libzephyr3 No candidate ver: libuniconf4.4 No candidate ver: libmbca0 No candidate ver: liblwres40 No candidate ver: hotkey-setup No candidate ver: libkrb53 No candidate ver: ttf-bitstream-vera No candidate ver: libeel2-2 No candidate ver: libopal-2.2 No candidate ver: songbird No candidate ver: plib1.8.4c2 No candidate ver: linux-image-2.6.27-7-generic No candidate ver: libpoppler3 No candidate ver: google-chrome-unstable No candidate ver: linux-image-2.6.28-11-generic No candidate ver: linux-restricted-modules-2.6.28-14-generic No candidate ver: simgear1.0.0 No candidate ver: libpoppler-glib3 No candidate ver: mono-common No candidate ver: libx264-65 No candidate ver: libwvstreams4.4-extras No candidate ver: libdns43 No candidate ver: libnm-glib0 No candidate ver: libpt2.6.1 No candidate ver: libisccc40 No candidate ver: libdns45 Your system is up-to-date There are no upgrades available for your system. The upgrade will now be canceled. Do you want to start the upgrdae? Continue [yN] Details [d] (Sorry that is so long...) I'm assuming I'm missing each of those packages. However, when I try to install them, for example: sudo apt-get install libisc44 I get some response that this package is missing and/or it may be part of another package. I'm not exactly sure what I should do. I don't want to reinstall ubuntu, since I have it dual booted with Windows Vista and I don't want to risk anything on the Windows partition. What are your thoughts? EDIT: I've posted this on Ubuntu Forums and nobody ever responded so...yah

  Read the article

• Ubuntu error: no candidate ver

  - by codedude

  Ok...so for some reason by Ubuntu 10.04 partition won't startup anymore. I'm not exactly sure what I did. I have the feeling that I accidentally removed some important packages. However, when I startup in Recovery Mode and select "dpkg: repair broken packages" I get this output: rm: cannot remove /var/lib/apt/lists/partial/*': No such file or directory rm: cannot remove/var/cache/apt/archives/partial/*': No such file or directory Reading Cache Reading Package lists: Done Reading State Information: Done Reading State Information: Done Reading State Information: Done No candidate ver: libisc44 No candidate ver: readahead No candidate ver: libdirectfb-1.0-0 No candidate ver: upstart-logd No candidate ver: libparted1.8-10 No candidate ver: libflickrnet2.1.5-cil No candidate ver: libicu38 No candidate ver: fast-user-switch-applet No candidate ver: linux-restricted-modules-2.6.28-11-generic No candidate ver: libnm-util0 No candidate ver: libwebkit-1.0-1 No candidate ver: libopal3.6.1 No candidate ver: libbind9-40 No candidate ver: linux-restricted-modules-common No candidate ver: upstart-compat-sysv No candidate ver: linux-restricted-modules-2.6.28-13-generic No candidate ver: chromium-browser No candidate ver: libisc45 No candidate ver: belocs-locales-bin No candidate ver: libxcb-xlib0 No candidate ver: libpoppler4 No candidate ver: libpulsecore9 No candidate ver: libpulsecore5 No candidate ver: linux-image-2.6.28-15-generic No candidate ver: libntfs-3g49 No candidate ver: libisccfg40 No candidate ver: libavahi-core5 No candidate ver: linux-restricted-modules-2.6.27-7-generic No candidate ver: libparted1.8-9 No candidate ver: libmagickwand1 No candidate ver: libwvstreams4.4-base No candidate ver: linux-image-2.6.28-14-generic No candidate ver: libraw1394-8 No candidate ver: libdatrie0 No candidate ver: libboost-program-options1.35.0 No candidate ver: libgnomekbdui3 No candidate ver: libsgutils1 No candidate ver: libass1 No candidate ver: linux-restricted-modules-2.6.28-15-generic No candidate ver: libindicate1 No candidate ver: libgnomekbd3 No candidate ver: system-services No candidate ver: linux-image-2.6.28-13-generic No candidate ver: libmagick10 No candidate ver: libcolamd-3.2.0 No candidate ver: desktop-effects-kde No candidate ver: picasa No candidate ver: libgnome-desktop-2-7 No candidate ver: libntfs-3g28 No candidate ver: libxklavier12 No candidate ver: libgpod3 No candidate ver: libmagickcore1 No candidate ver: libffado0 No candidate ver: libzephyr3 No candidate ver: libuniconf4.4 No candidate ver: libmbca0 No candidate ver: liblwres40 No candidate ver: hotkey-setup No candidate ver: libkrb53 No candidate ver: ttf-bitstream-vera No candidate ver: libee12-2 No candidate ver: libopal-2.2 No candidate ver: songbird No candidate ver: plib1.8.4c2 No candidate ver: linux-image-2.6.27-7-generic No candidate ver: libpoppler3 No candidate ver: google-chrome-unstable No candidate ver: linux-image-2.6.28-11-generic No candidate ver: linux-restricted-modules-2.6.28-14-generic No candidate ver: simgear1.0.0 No candidate ver: libpoppler-glib3 No candidate ver: mono-common No candidate ver: libx264-65 No candidate ver: libwvstreams4.4-extras No candidate ver: libdns43 No candidate ver: libnm-glib0 No candidate ver: libpt2.6.1 No candidate ver: libisccc40 No candidate ver: libdns45 No candidate ver: libisc44 No candidate ver: readahead No candidate ver: libdirectfb-1.0-0 No candidate ver: upstart-logd No candidate ver: libparted1.8-10 No candidate ver: libflickrnet2.1.5-cil No candidate ver: libicu38 No candidate ver: fast-user-switch-applet No candidate ver: linux-restricted-modules-2.6.28-11-generic No candidate ver: libnm-util0 No candidate ver: libwebkit-1.0-1 No candidate ver: libopal3.6.1 No candidate ver: libbind9-40 No candidate ver: linux-restricted-modules-common No candidate ver: upstart-compat-sysv No candidate ver: linux-restricted-modules-2.6.28-13-generic No candidate ver: chromium-browser No candidate ver: libisc45 No candidate ver: belocs-locales-bin No candidate ver: libxcb-xlib0 No candidate ver: libpoppler4 No candidate ver: libpulsecore9 No candidate ver: lipulsecore5 No candidate ver: linux-image-2.6.28-15-generic No candidate ver: libntfs-3g49 No candidate ver: libisccfg40 No candidate ver: libavahi-core5 No candidate ver: linux-restricted-modules-2.6.27-7-generic No candidate ver: libparted1.8-9 No candidate ver: libmagickwand1 No candidate ver: linux-image-2.6.28-14-generic No candidate ver: libraw1394-8 No candidate ver: libdatrie0 No candidate ver: libboost-program-options1.35.0 No candidate ver: libgnomekbdui3 No candidate ver: libsgutils1 No candidate ver: libass1 No candidate ver: linux-restricted-modules-2.6.28-15-generic No candidate ver: libindicate1 No candidate ver: libgnomekbd3 No candidate ver: system-services No candidate ver: linux-image-2.6.28-13-generic No candidate ver: libmagick10 No candidate ver: libcolamd-3.2.0 No candidate ver: desktop-effects-kde No candidate ver: picasa No candidate ver: libgnome-desktop-2-7 No candidate ver: libntfs-3g28 No candidate ver: libxklavier12 No candidate ver: libgpod3 No candidate ver: libmagickcore1 No candidate ver: libffado0 No candidate ver: libzephyr3 No candidate ver: libuniconf4.4 No candidate ver: libmbca0 No candidate ver: liblwres40 No candidate ver: hotkey-setup No candidate ver: libkrb53 No candidate ver: ttf-bitstream-vera No candidate ver: libeel2-2 No candidate ver: libopal-2.2 No candidate ver: songbird No candidate ver: plib1.8.4c2 No candidate ver: linux-image-2.6.27-7-generic No candidate ver: libpoppler3 No candidate ver: google-chrome-unstable No candidate ver: linux-image-2.6.28-11-generic No candidate ver: linux-restricted-modules-2.6.28-14-generic No candidate ver: simgear1.0.0 No candidate ver: libpoppler-glib3 No candidate ver: mono-common No candidate ver: libx264-65 No candidate ver: libwvstreams4.4-extras No candidate ver: libdns43 No candidate ver: libnm-glib0 No candidate ver: libpt2.6.1 No candidate ver: libisccc40 No candidate ver: libdns45 Your system is up-to-date There are no upgrades available for your system. The upgrade will now be canceled. Do you want to start the upgrdae? Continue [yN] Details [d] (Sorry that is so long...) I'm assuming I'm missing each of those packages. However, when I try to install them, for example: sudo apt-get install libisc44 I get some response that this package is missing and/or it may be part of another package. I'm not exactly sure what I should do. I don't want to reinstall ubuntu, since I have it dual booted with Windows Vista and I don't want to risk anything on the Windows partition. What are your thoughts? EDIT: I've posted this on Ubuntu Forums and nobody ever responded so...yah

  Read the article

• Why is System listening on port 8000?

  - by poke

  I noticed by accident today that I have some unknown webserver listening on port 8000. Opening http://localhost:8000 just returns 404, so I don’t get any hint what exactly is listening there. I’ve used netstat -ano to find out, that the process with PID 4 is listening on that port. PID 4 is the System process. Why is my system listening on that port, without me actually starting a server? Or how can I find out what exactly is listening there? I’ve read the related questions about port 80 and port 443, but none of the services mentioned there were running on my system. And the other suggestions there didn’t work either. edit: The HTTP response of the server lists Microsoft-HTTPAPI/2.0 as the server. edit2: As requested by Shadok, here are the entries of TCPView with 8000 as the port. But I doubt it’s useful at all…

  Read the article

• Routing Essentials

  - by zharvey

  I'm a programmer trying to fill a big hole in my understanding of networking basics. I've been reading a good book (Networking Bible by Sosinki) but I have been finding that there is a lot of "assumed" information contained, where terms/concepts are thrown at the reader without a proper introduction to them. I understand that a "route" is a path through a network. But I am struggling with visualizing some routing-based concepts. Namely: How do routes actually manifest themselves in the hardware? Are they just a list of IP addresses that get computed at the network layer, and then executed by the transport? What kind of data exists in a so-caleld routing table? Is a routing-table just the mechanism for holding these lists of IP address (read above)? What are the performance pros/cons for having a static route, as opposed to a dynamic route?

  Read the article

• How do I reassemble a zip file that has been emailed in multiple parts?

  - by Guy

  I received 3 emails each containing part of a zip file. The extensions end in .z00, .z01 and .z02. (Emailed as such to get around the typical 10Mb attachment limit per email.) I have put all 3 files into one directory. I can use both 7-zip and WinZip to open the first file (the .z00 file) and it lists the contents of the zip but when trying to extract the files both programs are reporting errors. What is the least error prone way of reassembling this zip and getting to the files?

  Read the article

• XNA Music mixing real-time

  - by Adam L. S.

  I've created a "format" to store segments of music (prelude part, repeated part, ending part) and time information for these segments (offset, scored length) so I can mix it up in real-time as if it were one piece of music, while repeating the repeated part (optionally) indefinitely. This way, the segments can store decay where the next segment is played, while the previous one is finished. (I've created a player for this in Java, and used the Clip class.) I wanted this format, so I can provide a finite length music (for a jukebox feature), while I play infinite length music in-games. However, when I wanted to code a class in XNA that manages this "format" I've noticed, that there is no obvious way to play "Songs" simultaneously/overlapped. How can I do this/what is the best practice, not leaving the XNA framework? (I don't want to create infinite play-lists.)

  Read the article

• HDMI Audio drops out when display enters powersave

  - by Jared Tritsch

  I have a Windows 8 machine with an AMD APU attached to my Home Theater system through HDMI (HDMI routes through a Home Theater AMP, then into the TV). Here's my problem, Whenever the display is interrupted, usually by the TV being turned off or into powersave mode, the audio device lists as "Disconnected" in windows audio devices and I cant get it to re-recognize that the HDMI audio is, in fact, plugged in. The only solution I have found so far is to restart the machine, which will then recognize the device without any problems, until the next time the TV turns off and the problem once again resurfaces. Has anyone else seen this phenomenon? I have no idea if its the GPU, the HDMI interface, the AMP, or even the TV itself, as there really isn't much a way to tell...

  Read the article

• How can I delete a specific file from a set of results using the find command in Linux?

  - by PeanutsMonkey

  I have the following command that lists all files with the extension doc, docx, etc. find . -maxdepth 1 -iname \*.doc\* The command returns numerous files some of which I would like to delete. So for example the results returned are Example.docx Dummydata.doc Sample.doc I would like to delete Sample.doc and Dummydata.docx. How do I delete the files using the -exec option. Am I able to pass in the names of the files e.g. rm Dummydata.docx Sample.doc hence the command would look as follows find . -maxdepth 1 -iname \*.doc\* -exec rm Dummydata.docx Sample.doc Can I pass the names of the files within {} afterrm`? e.g. find . -maxdepth 1 -iname \*.doc\* -exec rm {Dummydata.docx} Sample.doc Is there a better way of doing it?

  Read the article

• Adding user to chroot environment

  - by Neo

  I've created a chroot system in my Ubuntu using schroot and debrootstrap, based on minimal ubuntu. However whenever I can't seem to add a new user into this chroot environment. Here is what happens. I enter schroot as root and add a new user.(Tried both adduser and useradd commands) The username lists up in /etc/passwd file and I can 'su' into the new user. So far so good. When I log out of schroot, and re-enter schroot, the user I created has vanished!! There is no mention of that user in /etc/passwd either. How do I make the new user permanent?

  Read the article

• Re-downloading Microsoft SQL Server 2008 Standard because of license issues?

  - by James Watt

  I have many clients who have purchased Microsoft SQL Server 2008 Standard. Unlike other Microsoft software, there is not a serial number provided for each customer to install the software. Futhermore, Microsoft's TechNet website lists this information about SQL Server instead of providing a key: "This product is pre-pidded." This means that the configuration file for SQL server contains your serial number instead of manually entering it. My question is then: does this serial change for each customer? The reason I ask: I'd rather not download a 3.2GB disc image over and over again for each of my customers individually. But, I don't want to risk using the same image over and over again resulting in Microsoft banning the serial for over use (as opposed to each customer using their copy with THEIR serial number.) Thanks in advance.

  Read the article

• Selectively allow unsafe html tags in Plone

  - by dhill

  I'm searching for a way to put widgets from several services (PicasaWeb, Yahoo Pipes, Delicious bookmarks, etc.) on the community site I host on Plone (currently 3.2.1). I'm looking for a way to allow a group of users to use dangerous html tags. There are some ways I see, but I don't know how to implement those. One would be changing safe_html for the pages editors own (1). Another would be to allow those tags on some subtree (2). And yet another finding an equivalent of "static text portlet" that would display in the middle panel (3). We could then use some of the composite products (I stumbled upon Collage and CMFContentPanels), to include the unsafe content on other sites. My site has been ridden by advert bots, so I don't want to remove the filtering all together. I don't have an easy (no false positives) way of checking which users are bots, so deploying captcha now wouldn't help either. The question is: How to implement any of those solutions? (I already asked that on plone mailing list without an answer, so I thought I would give it another try here.)

  Read the article

• Streaming Youtube Videos

  - by Vinay

  Hi All, I am writing an application to play the youtube videos using streaming. First method: I am getting the RTSP URL to the video using GData APIs. Here is the code to play the RTSP url. VideoView mVideoView = new VideoView(this); setContentView(mVideoView); mVideoView.setVideoURI(Uri.parse("rtsp://rtsp2.youtube.com/CiILENy73wIaGQkDwpjrUxOWQBMYESARFEgGUgZ2aWRlb3MM/0/0/0/video.3gp")); mVideoView.start(); But it throws error on both G1 device and emulator (Emulator has some firewall problem as per mailing list) Here is the error message ERROR/PlayerDriver(35): Command PLAYER_INIT completed with an error or info PVMFFailure Second method: A hack way to get the path of 3gp file from http://www.youtube.com/get_video?v=&t=<&<.. After getting the file path and I can call setVideoURI and it plays fine. But it is a hack way to achieve the requirement. I have checked the Youtube App also, it also does the hack way to play the youtube url.(Checked with logcat) I have tried changing from VideoView to MediaPlayer but no change in the error. Is there a "Clean" way to do this? Please let me know your thoughts.

  Read the article

• System Restore Points

  - by Ross Lordon

  Currently I am investigating how to schedule an automatic initiation of a system restore point for all of the workstations in my office. It seems that Task Scheduler already has some nice defaults (screenshots below). Even the history for this task verifies that it is running successfully. However, when I go to Recovery in the Control Panel it only lists the System Restore Points one for every previous for only 3 weeks back even if I check the show more restore points box. Why don't the additional ones appear? Would there be a better way to implement a solution, like via group policy or a script? Is there any documentation on this online? I've been having a hard time tracking anything down except how to subvert group policy disabling this feature.

  Read the article

• Belkin Wireless G router not working on Windows 7

  - by coore

  I have a Belkin F5D7230-4 Wireless G router which used to work on XP. I have a clean Windows 7 install (on the same desktop PC), and it just won't work. Device Manager lists the adapter as a USB device, but it says "The drivers for this device are not installed", even though the driver installer said the installation was OK. Manage Wiresless Networks says "wireless is not currently enabled". The WLAN AutoConfig service is running. My specific question is which of the two symptoms above should I go for first? Should I try to fix the driver installation somehow, or should I try to enable wireless? Is one caused by the other, or is this two independent problems? Any other thoughs that could help me are also appreciated.

  Read the article

• Internet Explorer defaults to 64-bit version

  - by Tim Long

  My IE8 has suddenly started defaulting to the 64-bit version. I have no idea how or why this has happened, but I suspect it might be linked to the Browser Choice Screen that Microsoft was recently forced to display by EU law. However, many web sites will not display correctly in IE8 x64 (eg. sites that use Adobe Flash or Microsoft Silverlight). I have the 32-bit version of IE pinned to my taskbar and if I launch it manually, everything is fine. But when I click on a URL from another program and IE is not already running, then the 64-bit version gets launched. This really messes with programs like BBC iPlayer which rely heavily on Adbobe Air and Flash. So, how do I get IE8 32-bit version to be the default version again? I've tried using the "default programs" control panel and that doesn;t make any difference (in fact, it doesn't give the choice between x84 and x64 versions, it just lists "internet explorer").

  Read the article

• Need to create street maps images with route plotted from address 1 to address 2

  - by daustin777

  I'm looking for software to create street map images that show the route from address 1 to address 2. It needs to be able to create the map images from either a database file that contains the addresses, a delimited text file that lists the addresses to route in each row, or an Excel file. I need to do this to create custom maps in bulk- 500 to 20,000 quantity from the data file. The purpose is to provide a map with a route from a location (address 1) to a retail store (address 2). The maps will be printed on a postcard. I have the data. I just need the mapping software. Is there software available that can do this?

  Read the article

• Alternatives to amavis for RAM-bound server

  - by rsuarez

  I'm running a small VPS server that works as web and mail server. It has only 256MB of RAM, and it's sucking 100MB of swap constantly. I've found that one of the culprits is amavis, taking about 30MB of resident memory, and would like to ditch it and use some alternative. I don't have much mail daily, so it being a bit slower wouldn't be a problem. I'd like to avoid Spamassassin altogether, if possible, because it's quite big even if used in offline mode. I'm already using RBLs and a few small blacklists, and used greylisting for a while but abandoned it because it gave me a few problems (don't remember which; I think it was related to not configuring properly white lists for several big ISPs). So, is there some alternative to amavis that I could use without much RAM (and if possible, CPU) usage? Thanks in advance.

  Read the article

• Freebsd Box hangs on boot loader

  - by user19039

  I have a freebsd box that seems to not want to boot past the boot loader. It wont go past the initial boot loader phase and just lists the version number for the boot loader(btx loader). It hangs there. I am not a fluent freebsd admin and decent at command line, however I can tell clearly it wont get past and boot past the disk. Loaded up rescue cd, mounted the drive. Couldnt get fsck going without seg faulting How do i get this fixed? I have a live cd.... just curious which route to take.

  Read the article

• My 4 GB microSD card only allows me to use 1 GB

  - by James Litewski

  My phone came with a 4 GB microSD card. On the card it lists that 3 GB goes to Muve Music which is Cricket's music program, and I get 1 GB... Well, I don't pay for Muve Music, so why waste the space? I thought I'd be able to simply buy an adapter and reformat the microSD card to get the full 4 GB; but that wasn't the case... I could only find the 1 GB partition on the card. I even tried reformatting the disk, but I had no luck. How can I get the full 4 GB? BTW, I'm running Mac OS X v10.7 (Lion).

  Read the article

• easiest way to (download and) convert HTML-structures into EPUB?

  - by gojira

  How would one (download and) convert HTML-structures into EPUB (or any other format suitable for the Sony PRS-505 reader)? My question is not how to convert a single HTML file into an EPUB file, as this is easy; what I mean is, I have some books I want to read on my Sony PRS-505 and these books are most often online in HTML format but withmany interlinked pages and there is one page with the list of contents, like this example http://www.edge.org/documents/ThirdCulture/d-Contents.html ... or sometimes it's a little bit more complicated as the list of contents only lists the chapters, and inside the chapters there are links to sub-chapters, like in this example: http:SLASHSLASHwww.hyw.com/Books/WargamesHandbook/Contents.htm (I can only post 1 hyperlink now b/c of user restriction, so this is why there is SLASHSLASH instead of //) I want to convert these examples and several others, with correct chapters, images and some acceptable formatting etc, so basically I want to make a proper ebook out of the HTML-tree. What is the easiest way?

  Read the article

• Recommendation for Wiki that supports WYSIWYG?

  - by Kylotan

  Currently we use a MediaWiki installation for writing documentation, but several of us find the markup format horribly arbitrary and awkward, with a mixture of Wiki tags and XML in the text, and the lack of any quick formatting buttons for things like ordered or unordered lists, different heading levels, quick embedding of images, tables, code samples, etc. Sites like LiveJournal provide most or all of this while still generating backwards-compatible markup so it's not like there's a technological impediment here. There are other niceties that we'd like to see, such as being able to pick a category from a list (ala Wordpress) or maybe being able to apply syntax highlighting to code samples, etc. Do Wikis exist that provide a decent range of these features to make life easier on the editor? Something with the features and presentation of WordPress but the page organisation of a Wiki would be perfect. (WikiMatrix returns several candidates, but among them is MediaWiki, which quite clearly is not a WYSIWYG interface except in the most tenuous fashion. I'd rather not dig through each one if it's plain that WikiMatrix is not being entirely stringent about its criteria.)

  Read the article

• Cisco access list logging. Why is there a difference between IPv4 and IPv6?

  - by growse

  I've got a Cisco 877 router. I've got an IPv4 access list and an IPv6 access list set up and configured similar to this: interface Dialer1 ... ip access-group INTERET-IN ipv6 traffic-filter IPV6-IN Each of these access lists has a final rule of deny ip/ipv6 any any log. However, in my syslog I notice that there's a difference in formatting between the two types of entries. IPv4 will say: %SEC-6-IPACCESSLOGP: list INTERNET-IN denied udp 88.89.209.63(137) -> 1.2.3.4(137), 1 packet Whereas the IPv6 list will say %IPV6_ACL-6-ACCESSLOGNP: list IPV6-IN/240 denied 59 2001:0:5EF5:79FD:14F9:B773:3EBA:3EE3 (Dialer1) -> 2001:800:1000:0::1, 8 packets Both have broadly the same information, but the IPv6 log entry is missing the protocol type and port, both of which are very useful if I'm trying to troubleshoot connectivity. Why is this? How do I get IPv6 deny logs to display the protocol and port used, if any?

  Read the article

• Good documentation tool that is not Latex?

  - by flpgdt

  I am far from being a expert in Latex but I'm ok to document my projects with it. Though I would seldom find people in the corporate word eager to learn latex and going along with the documentation. 99% of the cases they would just ask me the Word version of it. For technical documentation I find less resistance, but still, whenever I start a project with someone not familiar with latex, the starting up is troublesome. That said, latex is a bit of an oversize tool for my needs really. My documents hardly go further from tables, lists, few images and type styles (although I'd love to still be able to produce hyperlinked PDFs). What are other tools there, simpler and with a easier learning curve than Latex, but still PDF worthy and with minimally decent capabilities? It also has to run on windows :( Oh. yeah, MSWord is not an option ;)

  Read the article

< Previous Page | 100 101 102 103 104 105 106 107 108 109 110 111  | Next Page >