Search Results

Search found 89616 results on 3585 pages for 'working set'.

Page 104/3585 | < Previous Page | 100 101 102 103 104 105 106 107 108 109 110 111  | Next Page >

• Broadcom HT1100 SATA controller not working properly with 1TB drives

  - by Jeff C

  I've been using RHEL distro's for several years and always managed to find the answers until now. I know this is more of a hardware issue, but I've been working on this for over a week and trust Linux and the IT community to help more then HP. I have CentOS 6.3 installed on an HP ProLiant DL145 G3 server with the BroadCom HT1100 IO controller and ServerWorks SATA Controller MMIO BIOS v3.0.0015.6 Firmware. This controller does not support large drives fully. Here's what I've tried and the results; Stock setup - Freezes on the ServerWorks POST screen. Can't even enter CMOS without disconnecting the drives. If I simply disconnect the SATA cables before it gets to the ServerWorks screen and reconnect afterwards I can boot from a CD, USB, PXE fine. However fiddling with cables at ever boot isn't practical. If I enter the BIOS config I can set it to not try booting the drives but leave the controller enabled. This lets me boot normally but the drives are not visible in the OS (live CDs or USB installed). I used method #2 to install and update CentOS. I have the /boot partition on a USB drive (everything else is on the SATA drives in software RAID1) hoping that would work around the issue but I get this Kernel panic - not syncing:Attempted to kill init! Pid: 1, comm: init Not tainted 2.6.32-279.9.1.el6.x86_6 #1 Call Trace: [<ffffffff814fd6ba>] ? panic+0xa0/0x168 [<ffffffff81070c22>] ? do_exit+0x862/0x870 [<ffffffff8117cdb5>] ? fput+0x25/0x30 [<ffffffff81070c88>] ? do_group_exit+0x58/0xd0 [<ffffffff81070d17>] ? sys_exit_group+0x17/0x20 [<ffffffff8100b0f2>] ? system_call_fastpath+0x16/0x1b panic occured, switching back to text console I'm sure it should be possible to talk to the drives without the BIOS boot check since the BIOS doesn't see them in method #2 either, their disconnected when it checks, but Linux sees them fine. If anyone could help figure out how I would greatly appreciate it! The other possible option I've come across is a complex firmware update. Tyan has a few boards on their website with the HT1100 and a ServerWorks v3.0.0015.7 update which says "adds support for TB drives" in the release notes. If someone could help me get the Tyan SATA firmware into the HP ROM file so I could just reflash that would also be very much appreciated. Thanks for any help you guys can offer!

  Read the article

• Network unreachable on Ubuntu guest after trying to set up a host only network on Virtualbox

  - by gkb0986

  I have a Mac OS X host and a bunch of guests including Ubuntu and Arch Linux. I was trying to set up a host-only network at eth1 to let me ssh into the system. But now eth0 isn't working properly either. Ubuntu can no longer connect to remote hosts or browse the internet. It tells me that the network is unreachable. What's gone wrong here? I've included some diagnostics below. $ifconfig lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:10968 errors:0 dropped:0 overruns:0 frame:0 TX packets:10968 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:897264 (897.2 KB) TX bytes:897264 (897.2 KB) Other diagnostic commands and the output: $sudo lspci -n 00:00.0 0600: 8086:1237 (rev 02) 00:01.0 0601: 8086:7000 00:01.1 0101: 8086:7111 (rev 01) 00:02.0 0300: 80ee:beef 00:03.0 0200: 8086:100e (rev 02) 00:04.0 0880: 80ee:cafe 00:05.0 0401: 8086:2415 (rev 01) 00:06.0 0C03: 106B:003F 00:07.0 0680: 8086:7113 (REV 08) 00:0D.0 0106: 8086:2829 (REV 02) $sudo lshw -c network *-network DISABLED description: Ethernet interface product: 82540EM Gigabit Ethernet Controller vendor: Intel Corporation physical id: 3 bus info: pci@0000:00:03.0 logical name: eth0 version: 02 serial: 08:00:27:7d:22:df size: 1Gbit/s capacity: 1Gbit/s width: 32 bits clock: 66MHz capabilities: pm pcix bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000 driverversion=7.3.21-k8-NAPI duplex=full firmware=N/A latency=64 link=no mingnt=255 multicast=yes port=twisted pair speed=1Gbit/s resources: irq:19 memory:f0000000-f001ffff ioport:d010(size=8) $lsmod Module Size Used by nls_utf8 12557 1 isofs 40257 1 vboxsf 43743 2 vesafb 13844 1 snd_intel8x0 38570 2 snd_ac97_codec 134869 1 snd_intel8x0 ac97_bus 12730 1 snd_ac97_codec snd_pcm 97275 2 snd_intel8x0,snd_ac97_codec snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi rfcomm 47604 0 snd_seq 61929 2 snd_seq_midi,snd_seq_midi_event bnep 18281 2 bluetooth 180113 10 rfcomm,bnep ppdev 17113 0 psmouse 97519 0 snd_timer 29990 2 snd_pcm,snd_seq joydev 17693 0 snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq vboxvideo 12622 1 serio_raw 13211 0 snd 79041 11 snd_intel8x0,snd_ac97_codec,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 15091 1 snd vboxguest 235498 7 vboxsf parport_pc 32866 0 drm 241971 2 vboxvideo i2c_piix4 13301 0 snd_page_alloc 18529 2 snd_intel8x0,snd_pcm mac_hid 13253 0 lp 17799 0 parport 46562 3 ppdev,parport_pc,lp usbhid 47238 0 hid 99636 1 usbhid e1000 108589 0

  Read the article

• Nginx not working properly on subdomains

  - by javipas

  I've been trying to setup a Sugar CRM instance. I've got a domain that has its main site on a server (www.domain.com) and I've created a subdomain (sugar.domain.com), but I wnat this subdomain to be hosted on another server. This second server has nginx installed, and there's a working WordPress blog there on a virtualhost, so I would need to setup a second site. To do this I've created the directory structure, and I've created a /etc/nginx/sites-enabled/sugar.domain.com configuration file that has the following: * server { listen 80; server_name sugar.domain.com *.domain.com; access_log /var/www/sugar/log/access.log; error_log /var/www/sugar/log/error.log info; location / { root /var/www/sugar; index index.php; } location ~ .php$ { fastcgi_split_path_info ^(.+\.php)(.*)$; fastcgi_pass backend; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /var/www/sugar/$fastcgi_script_name; include fastcgi_params; fastcgi_param QUERY_STRING $query_string; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_intercept_errors on; fastcgi_ignore_client_abort on; fastcgi_read_timeout 180; } ## Disable viewing .htaccess & .htpassword location ~ /\.ht { deny all; } } upstream backend { server 127.0.0.1:9000; } As far as I know, I need the *.domain.com parameter on the "server_name" flag, but something is crashing here: I get either a 403 Forbidden error, or I get PHP code (I can read the PHP file code in the browser, like normal text) that somehow is not executed. I've tried setting permissions to 755 inside the /var/www/sugar/ directory, and I've also set up the owner:group with a chown -R www-data:www-data /var/www/sugar/ The thing is, I don't now if my mistake is in the nginx site configuration, in my folder permissions, or in other place :( Could it be because of the main domain (www.domain.com) is hosted on other server? Do they have to be together necessarily?

  Read the article

• Nginx not working properly on subdomains [SOLVED]

  - by javipas

  I've been trying to setup a Sugar CRM instance. I've got a domain that has its main site on a server (www.domain.com) and I've created a subdomain (sugar.domain.com), but I wnat this subdomain to be hosted on another server. This second server has nginx installed, and there's a working WordPress blog there on a virtualhost, so I would need to setup a second site. To do this I've created the directory structure, and I've created a /etc/nginx/sites-enabled/sugar.domain.com configuration file that has the following: * server { listen 80; server_name sugar.domain.com *.domain.com; access_log /var/www/sugar/log/access.log; error_log /var/www/sugar/log/error.log info; location / { root /var/www/sugar; index index.php; } location ~ .php$ { fastcgi_split_path_info ^(.+\.php)(.*)$; fastcgi_pass backend; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /var/www/sugar/$fastcgi_script_name; include fastcgi_params; fastcgi_param QUERY_STRING $query_string; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_intercept_errors on; fastcgi_ignore_client_abort on; fastcgi_read_timeout 180; } ## Disable viewing .htaccess & .htpassword location ~ /\.ht { deny all; } } upstream backend { server 127.0.0.1:9000; } As far as I know, I need the *.domain.com parameter on the "server_name" flag, but something is crashing here: I get either a 403 Forbidden error, or I get PHP code (I can read the PHP file code in the browser, like normal text) that somehow is not executed. I've tried setting permissions to 755 inside the /var/www/sugar/ directory, and I've also set up the owner:group with a chown -R www-data:www-data /var/www/sugar/ The thing is, I don't now if my mistake is in the nginx site configuration, in my folder permissions, or in other place :( Could it be because of the main domain (www.domain.com) is hosted on other server? Do they have to be together necessarily?

  Read the article

• NGINX SSL Certificate Not Working

  - by LeSamAdmin

  I've been working on SSL stuff and getting nowhere from like 4 tutorials... I've bought an SSL for pingrglobe.com, and now trying to apply it to my servers. Here's my nginx code: http { server { listen 80; server_name pingrglobe.com; rewrite ^(.*) http://www.pingrglobe.com$1 permanent; } server { listen 443; ssl on; ssl_certificate /etc/nginx/ssl/pingrglobe.crt; ssl_certificate_key /etc/nginx/ssl/pingrglobe.key; #enables SSLv3/TLSv1, but not SSLv2 which is weak and should no longer be used. ssl_protocols SSLv3 TLSv1; #Disables all weak ciphers ssl_ciphers ALL:!aNULL:!ADH:!eNULL:!LOW:!EXP:RC4+RSA:+HIGH:+MEDIUM; server_name www.pingrglobe.com; root /var/www/pingrglobe.com; index index.html index.php; location / { try_files $uri $uri/ @extensionless-php; add_header Access-Control-Allow-Origin *; } rewrite ^/blog/blogpost/(.+)$ /blog/blogpost?post=$1 last; rewrite ^/viewticket/(.+)/(.*)$ /viewticket?tid=$1&$2 last; rewrite ^/vemail/(.+)$ /vemail?eid=$1 last; rewrite ^/serversettings/(.+)$ /serversettings?srvid=$1 last; rewrite ^/notification/(.+)$ /notification?id=$1 last; rewrite ^/viewreport/(.+)$ /viewreport?srvid=$1 last; rewrite ^/removeserver/(.+)$ /removeserver?srvid=$1 last; rewrite ^/staffviewticket/(.+)/(.*)$ /staffviewticket?tid=$1&$2 last; rewrite ^/activate/(.*)/(.*)/(.*)$ /activate?user=$1&code=$2&email=$3 last; rewrite ^/activate2/(.*)/(.*)/(.*)$ /activate2?user=$1&code=$2&email=$3 last; rewrite ^/passwordtoken/(.+)/(.*)/(.*)$ /passwordtoken?user=$1&token=$2&email=$3 last; location ~ \.php$ { try_files $uri =404; fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } location @extensionless-php { rewrite ^(.*)$ $1.php last; } location ~ /\. { deny all; } } } SSL doesn't work as you see here: https://www.pingrglobe.com

  Read the article

• Nginx config - serving index.html not working

  - by Bill

  I can't figure out how to redirect / to index.html. I've gone through the threads on serverfault and I think I've tried every suggestion including: rewrite statements within location / index index.html at the server level, within location / and within static content moving node.js proxy statements to location ~ /i instead of within location / Obviously something is wrong somewhere else in my configuration. Here is my nginx.conf: worker_processes 1; pid /home/logs/nginx.pid; events { worker_connections 1024; } http { include mime.types; default_type application/octet-stream; sendfile on; keepalive_timeout 65; error_log /home/logs/error.log; access_log /home/logs/access.log combined; include sites-enabled/*; } and my server config located in sites-enabled server { root /home/www/public; listen 80; server_name localhost; # proxy request to node location / { index index.html index.htm; proxy_set_header Host $http_host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header X-NginX-Proxy true; proxy_pass http://127.0.0.1:3010; proxy_redirect off; break; } # static content location ~ \.(?:ico|jpe?g|jpeg|gif|css|png|js|swf|xml|woff|eot|svg|ttf|html)$ { access_log off; add_header Pragma public; add_header Cache-Control public; expires 30d; } gzip on; gzip_vary on; gzip_http_version 1.0; gzip_comp_level 2; gzip_proxied any; gzip_min_length 1000; gzip_disable "msie6"; gzip_types text/plain text/css application/json application/x-javascript text/xml application/xml application/xml+rss text/javascript; } Everything else is working just fine. Requests get proxied to node correctly and static content is served correctly. I just need to be able to forward requests made to / to /index.html.

  Read the article

• Cisco adaptive security appliance is dropping packets where SYN flag is not set

  - by Brett Ryan

  We have an apache instance sitting inside our DMZ which is configured to proxy requests to an internal NATed tomcat instance inside our network. It works fine, but then all of a sudden requests from apache to the tomcat instance stop getting through with the following in the apache logs: [error] (70007)The timeout specified has expired: ajp_ilink_receive() can't receive header Investigating into the Cisco log viewer reveals the following: Error Message %ASA-6-106015: Deny TCP (no connection) from IP_address/port to IP_address/port flags tcp_flags on interface interface_name. Explanation The adaptive security appliance discarded a TCP packet that has no associated connection in the adaptive security appliance connection table. The adaptive security appliance looks for a SYN flag in the packet, which indicates a request to establish a new connection. If the SYN flag is not set, and there is not an existing connection, the adaptive security appliance discards the packet. Recommended Action None required unless the adaptive security appliance receives a large volume of these invalid TCP packets. If this is the case, trace the packets to the source and determine the reason these packets were sent. All are machines are virtualised using VMware, and by default machines have been using the Intel E1000 emulated NIC. Our network administrator has changed this to a VMXNET3 driver in an attempt to correct the problem, we just have to wait and see if the problem persists as it's an intermittent problem. Is there something else that could be causing this problem? This isn't the first service where we have had similar issues. Our apache host is running Ubuntu 11.10 with a kernel version of 3.0.0-17-server. We have also had this issue on RHEL5 (5.8) running kernel 2.6.18-308.16.1.el5, this machine also has the E1000 NIC. NOTE: I am not a network administrator and am a software architect and analyst programmer responsible for these systems.

  Read the article

• vhost.conf file in PLESK not working as intended

  - by Saif Bechan

  I have configured a vhost file for my domain but it does not seem to work. These are the steps I took, please correct me if I am wrong. First I made a file called vhost.conf in: /var/www/vhosts/*domain*/conf/vhost.conf The content of the vhost file looks like this: <Directory /var/www/vhosts/*domain*/httpdocs> php_admin_flag engine on php_admin_flag display_errors on </Directory> Now in my /etc/php.ini i set display_errors=Off After everything i rebuild with: /usr/local/psa/admin/sbin/websrvmng -a But I don't see the any errors in my page. When i turn on the display_errors in /etc/php.ini only then can I see the errors. I know for a fact that the vhost file is read, because when i type nonsense values i get an error when restarting apache saying there are errors in the vhost file. Anyone know what the problem can be. Should there be special settings in either the php.ini file or the httpd.conf file. The httpd.conf i edit is in /etc/httpd/conf/httpd.conf. Is this the file that PLESK uses or is there another, because the values i see there do not really reflect the http folders of my domain. The httpd file looks like this now. # The document root DocumentRoot "/var/www/html" # i guess this is the base directory <Directory /> Order Deny,Allow Deny from all Options None AllowOverride None </Directory> # And i guess here are all my domains located, but there aren't any here <Directory "/var/www/html"> Options None AllowOverride None Order allow,deny Allow from all </Directory> Only this directory /var/www/html is not used by me, I use the directory /var/www/vhosts. The only folder found in /var/www/html is a folder called awstats. Does plesk use other files, and where are they located. I hope this all makes sense to anyone, and i hope i can find a solution

  Read the article

• Mod_Proxy_AJP set up issues

  - by TripWired

  I'm trying to set up Tomcat behind Apache using mod_proxy_ajp. After tons of messing around with the configs I am stuck at a 403 page when trying to access tomcat. I had a 404 before but apparently something I changed along the way fixed that. I'm not sure which setting to change at this point. Could anyone look over the configs I have and see if anything is missing. httpd.conf <IfModule mod_proxy.c> ProxyRequests Off <Proxy *> Order deny,allow Deny from all Allow from localhost </Proxy> proxy_ajp.conf LoadModule proxy_ajp_module modules/mod_proxy_ajp.so # # When loaded, the mod_proxy_ajp module adds support for # proxying to an AJP/1.3 backend server (such as Tomcat). # To proxy to an AJP backend, use the "ajp://" URI scheme; # Tomcat is configured to listen on port 8009 for AJP requests # by default. # # # Uncomment the following lines to serve the ROOT webapp # under the /tomcat/ location, and the jsp-examples webapp # under the /examples/ location. # ProxyPass /tomcat ajp://127.0.0.1:8009/ ProxyPassReverse /tomcat ajp://127.0.0.1:8009/ ProxyPass /examples/ ajp://localhost:8009/jsp-examples/

  Read the article

• Using GitOAuthPlugin for Jenkins - not working as expected

  - by Blundell

  I need some clarity and maybe a fix. I'm using this plugin to authorise who views our Jenkins ci server: https://wiki.jenkins-ci.org/display/JENKINS/Github+OAuth+Plugin As I understand it anyone who is auth'd to view one of our github project's can also login to our Jenkins box. This works I thought it would also allow the person logging in to only view the Project that they have GitHub permission on. For instance. Three projects on GitHub (A,B,C). Three builds on Jenkins. User 1 has Git access to all 3 projects (A B C). User 2 has Git access to only 1 project (A). When logging into Jenkins: User 1 can see all 3 projects ( this works ) User 2 can only see project A The problem is User 2 can also see all 3 projects when they should only see 1! Have I got this correct, and if so is this a bug? I have the settings set in Jenkins configuration Github Authorization Settings. Here we have some admin users. One organization. And none out of the 4 checkboxes ticked. (User 2, is not an admin, is not part of the org). The plugin is open sourced here: https://github.com/mocleiri/github-oauth-plugin I was trying to get Jenkins to print me the Logs from the plugin but I also failed at viewing these (to see if there was an issue). I followed these instructions: https://wiki.jenkins-ci.org/display/JENKINS/Logging It's the same concept as outlined below but using GitHub rather than manually selecting users: https://wiki.jenkins-ci.org/display/JENKINS/2012/01/03/Allow+access+to+specific+projects+for+Users%28Assigning+security+for+projects+in+Jenkins%29 Have I got this right or wrong? Is it possible to auth a Jenkins user to only see one project?

  Read the article

• Persistent static route stops working after VPN drops and reconnects

  - by user76157

  I've got a VPN between two networks, one home and one office (A and B). Their subnets are: (A) 192.168.1.0 and (B) 192.168.0.0 The two networks have identical ADSL routers. Unfortunately these can only do dial-out VPN. So I've got a Windows 2008 server on Network B acting as a VPN server (ServerB). Network A's router (RouterA) passes through Network B's router and connects via PPTP to ServerB. RouterA is assigned the static IP 192.168.0.40 on Network B. There's a persistent static route on ServerB telling it to use 0.40 for all requests to Network A's subnet, 192.168.1.0. (route -p add 192.168.1.0 mask 255.255.255.0 192.168.0.40). This enables ServerB to ping all machines on A (and those machines to ping ServerB). The VPN connection occasionally drops (I'm not sure why - it's set to remain always on and seems to drop randomly). This wouldn't be too much of a problem, as it reconnects automatically and quickly, except that when it does reconnect, the static route on ServerB no longer works. Route print (on ServerB) shows that the persistent static route still exists. However a tracert to a machine on Network A doesn't use the static route; it tries instead to use ServerB's default gateway (which is RouterB), and fails to find the machine. Deleting and re-adding the static route fixes the problem - a tracert uses the static route. At the moment, a batch file to delete and re-add the static route is scheduled to run every day. But this is clearly far from an ideal solution! I hope that's not too confusing. Any help would be very much appreciated.

  Read the article

• Unable to connect remotely to Vsftpd server set up on CentOS VirtualBox

  - by ryekayo

  I have set up a Vsftp server using the following instructions provided Here and even went as far as following the commentary at the bottom. But I am unable to connect remotely. When I attempt to use FileZilla or my Ubuntu terminal, I always get: ryan@ryan-Galago-UltraPro:~$ ftp 10.0.x.xx ftp: connect: Connection timed out ftp> I have checked and re-checked iptables conf file and made sure that Port 21 is being Accepted and it is. I have looked this up on the web and decided to try nmap to port scan it and this is what I get for a result: ryan@ryan-Galago-UltraPro:~$ nmap -PN 10.0.xx.xx Starting Nmap 6.40 ( http://nmap.org ) at 2014-08-19 15:01 EDT Nmap scan report for 10.0.xx.xx Host is up. All 1000 scanned ports on 10.0.xx.xx are filtered Nmap done: 1 IP address (1 host up) scanned in 201.38 seconds Is there anything else that I should do or check for? UPDATE: I have tried to ping from the virtual machine to my IP address on Ubuntu and have been successfully able to. I cannot ping to my virtual machine from Ubuntu. I have narrowed this down to possibly being a firewall related issue on Ubuntu's side, but why would I be unable to connect from FileZilla?

  Read the article

• Windows 8 auto-hibernate from sleep not working on Retina MacBook Pro

  - by frenchglen

  I have a similar question to this one. Only my context is the 15" Retina MacBook Pro - and Windows 8. I have just the original Mac OS X Mountain Lion on there, then Windows 8 via Bootcamp. no rEFIt installed. (I just press ALT every time I restart windows, actually as a security measure to stop tech-unsavvy thugs, who, if the laptop is stolen, think it's only a mac and don't discover my Windows as quickly as they would've, and by that time I remotely activate various anti-theft mac apps and nab them that way). SO: like the related question asks, why isn't it behaving like it should? The Windows 7 FAQ states: Will sleep eventually drain my laptop battery? If your laptop battery charge gets critically low while the computer is asleep, Windows automatically puts the laptop into hibernation mode. But this is just not happening - on my rMBP Windows 8. It seems EVERY time I set the laptop to sleep (when it reaches 10%), then arriving home and plugging it in and hoping to simply resume my work, it does NOT save the session to disk and I lose ALL my work. Who's fault is it? Win 8's (a bug, grr)? Or Apple's EFI system (maybe fixable via editing EFI options/do I have to install refit to make it work perhaps?) Or maybe changing windows power options can somehow fix the problem? Thanks for your help.

  Read the article

• Samba server NETBIOS name not resolving, WINS support not working

  - by Eric

  When I try to connect to my CentOS 6.2 x86_64 server's samba shares using address \\REPO (NETBIOS name of REPO), it times out and shows an error; if I do so directly via IP, it works fine. Furthermore, my server does not work correctly as a WINS server despite my samba settings being correct for it (see below for details). If I stop the iptables service, things work properly. I'm using this page as a reference for which ports to use: http://www.samba.org/samba/docs/server_security.html Specifically: UDP/137 - used by nmbd UDP/138 - used by nmbd TCP/139 - used by smbd TCP/445 - used by smbd I really really really want to keep the secure iptables design I have below but just fix this particular problem. SMB.CONF [global] netbios name = REPO workgroup = AWESOME security = user encrypt passwords = yes # Use the native linux password database #passdb backend = tdbsam # Be a WINS server wins support = yes # Make this server a master browser local master = yes preferred master = yes os level = 65 # Disable print support load printers = no printing = bsd printcap name = /dev/null disable spoolss = yes # Restrict who can access the shares hosts allow = 127.0.0. 10.1.1. [public] path = /mnt/repo/public create mode = 0640 directory mode = 0750 writable = yes valid users = mangs repoman IPTABLES CONFIGURE SCRIPT # Remove all existing rules iptables -F # Set default chain policies iptables -P INPUT DROP iptables -P FORWARD DROP iptables -P OUTPUT DROP # Allow incoming SSH iptables -A INPUT -i eth0 -p tcp --dport 22222 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --sport 22222 -m state --state ESTABLISHED -j ACCEPT # Allow incoming HTTP #iptables -A INPUT -i eth0 -p tcp --dport 80 -m state --state NEW,ESTABLISHED -j ACCEPT #iptables -A OUTPUT -o eth0 -p tcp --sport 80 -m state --state ESTABLISHED -j ACCEPT # Allow incoming Samba iptables -A INPUT -i eth0 -p udp --dport 137 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p udp --sport 137 -m state --state ESTABLISHED -j ACCEPT iptables -A INPUT -i eth0 -p udp --dport 138 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p udp --sport 138 -m state --state ESTABLISHED -j ACCEPT iptables -A INPUT -i eth0 -p tcp --dport 139 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --sport 139 -m state --state ESTABLISHED -j ACCEPT iptables -A INPUT -i eth0 -p tcp --dport 445 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --sport 445 -m state --state ESTABLISHED -j ACCEPT # Make these rules permanent service iptables save service iptables restart**strong text**

  Read the article

• How to set up ProxMox 1.9 on VPN?

  - by Gnudiff

  Disclaimer: I have only rudimentary knowledge of VPNs. I would love to learn about them properly, however, at the moment I really need to make stuff work on short notice. I am trying to set up a ProxMox virtualization platform in an existing network. The network currently consists of several servers which have VMWare free edition. There is some sort of VPN defined in switch. In order for VMWare management interface to be accessible, there needs to be ticked a checkbox in the network settings for VPN and entered the VPN id. I didn't notice any such configuration option during ProxMox installation, so my Proxmox VE on the same physical server, using same manual IP settings (ip/nm/gw), is not accessible. As I understand I should touch the Proxmox's underlying Debian config in /etc/network/interfaces, but I have no idea, what should I aim for: do I specify the settings for eth0, do I make a virtual interface? How to make it accessible for both ProxMox VE and underlying future VMs? I read the ProxMox installation guide, but unfortunately it presumes better understanding of VPNs than I have. A config template or similar would be appreciated. Thanks in advance.

  Read the article

• SSL with nginx on subdomain not working

  - by peppergrower

  I'm using nginx to serve three sites: example1.com (which redirects to www.example1.com), example2.com (which redirects to www.example2.com), and a subdomain of example2.com, call it sub.example2.com. This all works fine without SSL. I recently got SSL certs (from StartSSL), one for www.example1.com, one for www.example2.com, and one for sub.example2.com. I got them set up and everything seems to work (I'm using SNI to make all this work on a single IP address), except for sub.example2.com. I can still access it fine over non-SSL, but on SSL I just get a timeout. If I go directly to my server's IP address, I get served the SSL certificate for sub.example2.com, so I know nginx is loading the certificate properly...but somehow it doesn't seem to be listening for sub.example2.com on port 443, even though I told it to. I'm running nginx 1.4.2 on Debian 6 (squeeze); here's my config for sub.example2.com (the other domains have similar configs): server { server_name sub.example2.com; listen 80; listen 443 ssl; ssl_certificate /etc/nginx/ssl/sub.example2.com/server-unified.crt; ssl_certificate_key /etc/nginx/ssl/sub.example2.com/server.key; root /srv/www/sub.example2.com; } Does anything look amiss? What am I missing? I don't know if it matters, but StartSSL lists the base domain as a subject alternative name (SAN); not sure if that would somehow pose problems, if both subdomains list the same SAN.

  Read the article

• Trying to Set Up SSH Tunneling To MySQL Server for MySQL Query Browser

  - by Teno

  I'm trying to set up SSH tunneling on a remote web server to another MySQL server so that the database can be browsed easily with MySQL Query Browser. I'm following this page but cannot connect to the MySQL server. http://www.howtogeek.com/howto/ubuntu/access-your-mysql-server-remotely-over-ssh/ What I've done: logged in to the web server with Putty via SSH. typed ssh -L 33060:[database]:3306 [myusername]@[webserver_address] where [...]s are altered by the actual information. I was asked a password and typed it and got the following message. So it seems login was successful. socket: Protocol not supported Last login: .... 2012 from .... Copyright (c) 1980, 1983, 1986, 1988, 1990, 1991, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 7.1-RELEASE.... Welcome to FreeBSD! Opened MySQL Query Browser in Windows and entered Server Host: localhost Port: 33060 UserName: myusername PassWord: mypassword And it says, Could not connect to the specified instance. MySQL Error Number 2003 Can't connect to MySQL Server on 'localhost' (10061) Sorry if this is too basic. Thanks for your information.

  Read the article

• RRAS NAT not working on a certain computer

  - by legenden

  This is driving me crazy. I have a virtualized W2K8 server running RRAS. Every other computer or server on the network can access the internet through the NAT except one. On one server, it just won't work. I can ping the ip address of the NAT gateway just fine, and everything else works. (SMB, etc) DNS, which is hosted by the same server, also works just fine. I have even reinstalled the OS on the problem server and it still doesn't work. Recap of the steps I tried: There are 3 network cards in the server, I tried every one and different switch ports. Not a hardware problem. Reinstalled W2K8 R2 on server with the problem, didn't help. Tried the IP of the internet gateway directly - this did work (!). But I need NAT to work. All firewalls are disabled. Removed computer from domain, deleted computer membership in Active Directory Users and Computers and added it back. Disabled all other network adapters and set a static ip and specified the gateway ip manually. When I tracert a public IP, the first hop (or any other hop) comes up as: C:\>tracert www.google.com Tracing route to www.l.google.com [209.85.225.106] over a maximum of 30 hops: 1 * * * Request timed out. 2 * * * Request timed out. From a different computer, on which NAT works, the first hop comes up as: tracert www.google.com Tracing route to www.l.google.com [209.85.225.105] over a maximum of 30 hops: 1 <1 ms * <1 ms xxxx [10.5.1.1] This is the most bizarre problem I ever came across, and I realize that it's a long shot asking it here given all the details, but I'm pulling my hair out. Maybe someone has an idea...

  Read the article

• I am trying to set up a ubuntu sever 12.04 on my machine [migrated]

  - by Jseb

  I am trying to set up a server on my home network which will eventually host rails. I am not great in linux server and i try to follow the prompt. I did succesfully get to a black screen which then prompts me to a username then password to then do anything ( assuming). However here what i try to do I kinda fellow his tutorial http://www.ubuntugeek.com/step-by-step-ubuntu-11-04-natty-lamp-server-setup.html but however the command where not 100% like him not in same order but same idea. Then i want to install ubuntu server with gui here the command i try with sudo apt-get upgrade sudo apt-get install ubuntu-desktop Which however give me the following error Err http... inRelease w Failed to fetch ht... So been ignored if i try the desktop one i get E: unable to locate package ubuntu E: unable to locate package desktop So i am assuming i am not connected to the internet, so i try the following command sudo vi /etc/network/interfaces here the output it gives me and i know my gateway on my laptop is 192.168.1.1 address: 192.168.1.148 netmask: 255.255.255.0 network: 192.168.1.0 broadcasts: 192.168.1.255 gateway: 192.168.1.1 Btw i do not know the command to get out of vi and saving it. Err http://us.archive.ubuntu.com precises InRelease Err http://us.archive.ubuntu.com precises-updates InRelease Err http://us.archive.ubuntu.com precises-backports InRelease Reading package lists... Done W: Failed to fetch http://us.archive.ubuntu.com/ubuntu/dists/precise/InRelease W: Failed to fetch http://us.archive.ubuntu.com/ubuntu/dists/precise-updates/InRelease W: Failed to fetch http://us.archive.ubuntu.com/ubuntu/dists/precise-backport/InRelease

  Read the article

• Passwordless SSH not working - keys copied and permissions set

  - by Comcar

  I know this question has been asked, but I'm certain I've done what all the other answers suggest. Machine A: used keygen -t rsa to create id_rsa.pub in ~/.ssh/ copied Machine A's id_rsa.pub to Machine B user's home directory Made the file permissions of id_rsa.pub 600 Machine B added Machine A's pub key to authorised_keys and authorised_keys2: cat ~/id_rsa.pub ~/.ssh/authorised_keys2 made the file permissions of id_rsa.pub 600 I've also ensured both the .ssh directories have the permission 700 on both machine A and B. If I try to login to machine B from machine A, I get asked for the password, not the ssh pass phrase. I've got the root users on both machines to talk to each other using password-less ssh, but I can't get a normal user to do it. Do the user names have to be the same on both sides? Or is there some setting else where I've missed. Machine A is a Ubuntu 10.04 virtual machine running inside VirtualBox on a Windows 7 PC, Machine B is a dedicated Ubuntu 9.10 server UPDATE : I've run ssh with the option -vvv, which provides many many lines of output, but this is the last few commands: debug3: check_host_in_hostfile: filename /home/pete/.ssh/known_hosts debug3: check_host_in_hostfile: match line 1 debug1: Host '192.168.1.19' is known and matches the RSA host key. debug1: Found key in /home/pete/.ssh/known_hosts:1 debug2: bits set: 504/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug3: Wrote 16 bytes for a total of 1015 debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug3: Wrote 48 bytes for a total of 1063 debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /home/pete/.ssh/identity ((nil)) debug2: key: /home/pete/.ssh/id_rsa (0x7ffe1baab9d0) debug2: key: /home/pete/.ssh/id_dsa ((nil)) debug3: Wrote 64 bytes for a total of 1127 debug1: Authentications that can continue: publickey,password debug3: start over, passed a different list publickey,password debug3: preferred gssapi-keyex,gssapi-with-mic,gssapi,publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Trying private key: /home/pete/.ssh/identity debug3: no such identity: /home/pete/.ssh/identity debug1: Offering public key: /home/pete/.ssh/id_rsa debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug3: Wrote 368 bytes for a total of 1495 debug1: Authentications that can continue: publickey,password debug1: Trying private key: /home/pete/.ssh/id_dsa debug3: no such identity: /home/pete/.ssh/id_dsa debug2: we did not send a packet, disable method debug3: authmethod_lookup password debug3: remaining preferred: ,password debug3: authmethod_is_enabled password debug1: Next authentication method: password

  Read the article

• DNS server not working?

  - by Behrooz A

  I just set up a DNS Server on my windows 7, called SimpleDNS I added a zone for example sag.com and defined www.sag.com and sag.com to 192.168.1.2 (my Network IP Address) . the problem is when I try to ping sag.com the SimpleDNS logs says that it answered the request with 192.168.1.2 , but the ping doesn't resolve anything . SimpleDNS logs: > 14:00:43 Request from 192.168.1.2 for A-record for www.sag.com > 14:00:43 Sending reply to 192.168.1.2 about A-record for > www.sag.com: 14:00:43 -> Answer: A-record for www.sag.com = > 192.168.1.2 14:00:43 -> Authority: NS-record for www.sag.com = mehr-pc nslookup : > C:\Users\Mehr\Desktop>nslookup www.sag.com DNS request timed out. > timeout was 2 seconds. Server: UnKnown Address: 192.168.1.1 > > DNS request timed out. > timeout was 2 seconds. DNS request timed out. > timeout was 2 seconds. DNS request timed out. > timeout was 2 seconds. DNS request timed out. > timeout was 2 seconds. > *** Request to UnKnown timed-out the DNS server IP is 192.168.1.2 , and Access point address : 192.168.1.1 what should I do?

  Read the article

• DNS server not working?

  - by Behrooz A

  I just set up a DNS Server on my windows 7, called SimpleDNS I added a zone for example sag.com and defined www.sag.com and sag.com to 192.168.1.2 (my Network IP Address) . the problem is when I try to ping sag.com the SimpleDNS logs says that it answered the request with 192.168.1.2 , but the ping doesn't resolve anything . SimpleDNS logs: > 14:00:43 Request from 192.168.1.2 for A-record for www.sag.com > 14:00:43 Sending reply to 192.168.1.2 about A-record for > www.sag.com: 14:00:43 -> Answer: A-record for www.sag.com = > 192.168.1.2 14:00:43 -> Authority: NS-record for www.sag.com = mehr-pc nslookup : > C:\Users\Mehr\Desktop>nslookup www.sag.com DNS request timed out. > timeout was 2 seconds. Server: UnKnown Address: 192.168.1.1 > > DNS request timed out. > timeout was 2 seconds. DNS request timed out. > timeout was 2 seconds. DNS request timed out. > timeout was 2 seconds. DNS request timed out. > timeout was 2 seconds. > *** Request to UnKnown timed-out the DNS server IP is 192.168.1.2 , and Access point address : 192.168.1.1 what should I do?

  Read the article

• replica set with multiple primary nodes

  - by miguel

  I am trying to configure a replica set with three nodes: node A, B and C. I execute the rs.add()'s from node A and after that rs.status() shows that the three nodes are PRIMARY. Moreover node B and C have 0 pingMs. If I execute rs.status() from node B or C the only node listed is the self (As PRIMARY). I tried adding an arbiter but it didn't work (it behaved as the nodes B and C). I think this can be a networking problem but I can't figure it out. Edit: This is the output for netstat -anp|grep 27017: tcp 0 0 0.0.0.0:27017 0.0.0.0:* LISTEN - tcp 0 0 10.0.1.211:55772 10.0.1.213:27017 TIME_WAIT - tcp 0 0 127.0.0.1:50509 127.0.0.1:27017 ESTABLISHED - tcp 0 0 127.0.0.1:27017 127.0.0.1:50509 ESTABLISHED - tcp 0 0 10.0.1.211:55774 10.0.1.213:27017 TIME_WAIT - tcp 0 0 10.0.1.211:55776 10.0.1.213:27017 ESTABLISHED - tcp 0 0 10.0.1.211:39180 10.0.1.212:27017 ESTABLISHED - tcp 0 0 10.0.1.211:39178 10.0.1.212:27017 TIME_WAIT - tcp 0 0 10.0.1.211:39176 10.0.1.212:27017 TIME_WAIT - unix 2 [ ACC ] STREAM LISTENING 3291267 - /tmp/mongodb-27017.sock the private ips for the node B and C are 10.0.1.212 and 10.0.1.213 respectively (they appear to have an established connection in the 27017 port according to the netstat output).

  Read the article

• Apache2 VirtualHost on Debian not working

  - by milo5b

  I am having some problems with Apache2 configuration. I have already tried to look for documentation on the web (Apache's site, Debian's site, here on serverfault, etc), but nothing really helps. I have tried different configurations, but my current configuration is the following (/etc/apache2/sites-available/default): <VirtualHost *:80> ServerAdmin [email protected] ServerName mysite.dev ServerAlias mysite.dev DocumentRoot /var/www/mysite.dev/httpdocs/ ErrorLog ${APACHE_LOG_DIR}/error.log LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined </VirtualHost> <VirtualHost *:80> ServerAdmin [email protected] ServerName livesite.com ServerAlias www.livesite.com DocumentRoot /var/www/livesite.com/httpdocs/ <Directory /var/www/livesite.com/httpdocs/> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined </VirtualHost> mysite.dev it's just an entry in hosts file on my client machine, while livesite.com it's an actual DNS record which would resolve to the same IP as the IP set in hosts file for mysite.dev. The problem is that when i try to type mysite.dev in my browser, it would automatically go to livesite.com. I tried to have different /etc/apache2/sites-enabled/ files (/etc/apache2/sites-enabled/mysite.dev , /etc/apache2/sites-enabled/livesite.com ) - and of course with the actual sites-available related files, but achieving the same results. I have tried to have a peak on error.log and access.log but there's nothing I can see. My httpd.conf contains: AccessFileName .htaccess And I have no /etc/apache2/conf.d/virtual.conf file. Any help would be greatly appreciated - if I did not provide enough info please let me know I will do my best to provide all necessary info. Thanks

  Read the article

• How to set up multiple DNS servers on an intranet

  - by Brent

  We have an Active Directory network, with a mixture of Windows DNS, linux BIND servers, and want to use OpenDNS as our external DNS provider. I am wondering What is the best way to set up these servers (regarding forwarders, recursion, etc.)? Active Directory is our main internal DNS for our domain, and has 3 redundant servers. DHCP and all our servers use these as their DNS servers. Then we have a legacy AD server from an old network that is still authoritative for a bunch of domains. Finally, we have a couple of Linux Bind servers that are authoritative for a bunch of websites we host. Should our main AD servers point to our legacy AD server, which points to one of our BIND servers, which points to the other BIND server, which finally points out to openDNS? Or should our main AD servers point to all of these directly? - or is there a better option? What happens if a domain is listed in 2 places? Does DNS process the forwarders in order? What about root servers - if I want to use OpenDNS for "everything else", do I just list them as the last forwarders, and delete the root servers from all my DNS servers? How does recursion work - in this scenario, should I be using recursion or not?

  Read the article

< Previous Page | 100 101 102 103 104 105 106 107 108 109 110 111  | Next Page >