Search Results

Search found 47679 results on 1908 pages for 'web admin'.

Page 1047/1908 | < Previous Page | 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054  | Next Page >

• Programmer configuring a new network

  - by David Lively

  I'm in the process of expanding my home network from a couple of laptops on a wireless Verizon FiOS router to include: Linksys 24-port switch Cisco Pix 515 Cisco 3640 router One new development desktop and three new machines to act as a db server, web server and a backup system. My company is moving offices and we've decommissioned some older hardware, which I was able to pick up for the cost of the labor to move it home from the office. The benefits to working with dedicated web and db servers are very valuable to me. I know very little about network topology, other than that everything plugs into the switch, which then plugs into the cheap Verizon router. (Verizon provides a coax connection that the router must translate into Ethernet before I can use it with any of this equipment). Questions: What is the recommended topology for this equipment? Verizon router - Pix - 3600 - switch? Is the 3600 even necessary or desirable? The Verizon router has one WAN port and 4 client ports, all 10/100. Is there any performance benefit at all to wiring multiple connections from the verizon router to the switch, assuming I don't use the Pix? Should I use the Pix? Software firewalls are a pain, and seem silly if I have a device like this lying around. Anything else I should know? Am I wasting my time with this? I also obtained a 7 foot rack, shelves, patch panels, UPS, patch panels, etc, which are going into a conveniently air conditioned closet. All constructive advice appreciated.

  Read the article

• foswiki: hide some topic info when editing in WYSWYG mode.

  - by Mica

  I have a FOSWiki installation with a bunch of Topic templates already defined. the problem is, when a user selects the topic, they are presented with a bunch of extra information that they should not edit, and should not even see really. Is there a way to hide this content in the WYSWYG editor? Example: The topic template looks like this: <!-- * Foswiki.GenPDFAddOn Settings * Set GENPDFADDON_TITLE = <font size="7"><center>Foo</center></font> * Set GENPDFADDON_HEADFOOTFONT = helvetica * Set GENPDFADDON_FORMAT = pdf14 * Set GENPDFADDON_PERMISSIONS = print,no-copy * Set GENPDFADDON_ORIENTATION = portrait * Set GENPDFADDON_PAGESIZE = letter * Set GENPDFADDON_TOCLEVELS = 0 * Set GENPDFADDON_HEADERSHIFT = 0 --> <!-- PDFSTART --> <!-- HEADER LEFT "Foo:Bar" --> <!-- HEADER RIGHT "%BASETOPIC%" --> <!-- HEADER CENTER " " --> <!-- FOOTER RIGHT "Doc Rev %REVINFO{"r$rev - $date " web="%WEB%" topic="%BASETOPIC%"}%" --> <!-- FOOTER LEFT "F-xxx Rev A" --> <!-- FOOTER CENTER "Page $PAGE(1)" --> Header 1 foo etc. etc. etc <!-- pdfstop --> And when the user selects the topic template, they get all that in the WYSWYG editor. I would like to hide all that so when the user selects the topic template, they get Header 1 foo etc etc etc Without any of the other mark-up.

  Read the article

• Prevent outgoing traffic unless OpenVPN connection is active using pf.conf on Mac OS X

  - by Nick

  I've been able to deny all connections to external networks unless my OpenVPN connection is active using pf.conf. However, I lose Wi-Fi connectivity if the connection is broken by closing and opening the laptop lid or toggling Wi-Fi off and on again. I'm on Mac OS 10.8.1. I connect to the Web via Wi-Fi (from varying locations, including Internet cafés). The OpenVPN connection is set up with Viscosity. I have the following packet filter rules set up in /etc/pf.conf # Deny all packets unless they pass through the OpenVPN connection wifi=en1 vpn=tun0 block all set skip on lo pass on $wifi proto udp to [OpenVPN server IP address] port 443 pass on $vpn I start the packet filter service with sudo pfctl -e and load the new rules with sudo pfctl -f /etc/pf.conf. I have also edited /System/Library/LaunchDaemons/com.apple.pfctl.plist and changed the line <string>-f</string> to read <string>-ef</string> so that the packet filter launches at system startup. This all seems to works great at first: applications can only connect to the web if the OpenVPN connection is active, so I'm never leaking data over an insecure connection. But, if I close and reopen my laptop lid or turn Wi-Fi off and on again, the Wi-Fi connection is lost, and I see an exclamation mark in the Wi-Fi icon in the status bar. Clicking the Wi-Fi icon shows an "Alert: No Internet connection" message: To regain the connection, I have to disconnect and reconnect Wi-Fi, sometimes five or six times, before the "Alert: No Internet connection" message disappears and I'm able to open the VPN connection again. Other times, the Wi-Fi alert disappears of its own accord, the exclamation mark clears, and I'm able to connect again. Either way, it can take five minutes or more to get a connection again, which can be frustrating. Why does Wi-Fi report "No internet connection" after losing connectivity, and how can I diagnose this issue and fix it?

  Read the article

• Restore passwd for root on a server

  - by s.mihai

  Hello,       I have a DVR server with linux embeded. It has some telnet functions but i don't have the password for it (the chinese manufacturer refuses to give me the password). I did get a upgrade folder from them and found a passwd file inside.       So i assume that when i upgrade the firmware the password in that file will be used.       Now i am trying to modify the file so taht i can insert a password i already know.       The problem is that i don't know how to create the password hash from what i figured the password hash is $1$1/lfbDKX$Hmd.FqzB8IZEohPesYi961       The file is named rom.ko and i found a command telnetd /mnt/yaffs/web/boa -c /mnt/yaffs/web & /bin/cp -f /mnt/yaffs/rom.ko /etc/shadow in a script file so i assume this is the right way.       Can you help me reconstruct a password that i know already? Tell me how or make one for me :) ?... passwd file: root:$1$1/lfbDKX$Hmd.FqzB8IZEohPesYi961:0:0:99999:7:-1:-1:33637592 bin::10897:0:99999:7::: daemon::10897:0:99999:7::: adm::10897:0:99999:7::: lp::10897:0:99999:7::: sync::10897:0:99999:7::: shutdown::10897:0:99999:7::: halt::10897:0:99999:7::: mail::10897:0:99999:7::: news::10897:0:99999:7::: uucp::10897:0:99999:7::: operator::10897:0:99999:7::: games::10897:0:99999:7::: gopher::10897:0:99999:7::: ftp::10897:0:99999:7::: nobody::10897:0:99999:7::: next::11702:0:99999:7:::

  Read the article

• IIS8 Asp.net State service remote connection failure

  - by maxisam

  Recently we upgrade our web server to windows server 2012 with IIS8. We have this issue when users try to connect the asp.net state service to this web server remotely. It always popup Unable to make the session state request to the session state server. Please ensure that the ASP.NET State service is started and that the client and server ports are the same. If the server is on a remote machine, please ensure that it accepts remote requests by checking the value of HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\aspnet_state\Parameters\AllowRemoteConnection. If the server is on the local machine, and if the before mentioned registry value does not exist or is set to 0, then the state server connection string must use either 'localhost' or '127.0.0.1' as the server name. In IIS7 / 7.5 we use the same way and it works fine. As long as the state service is running and firewall is set properly, we don't have any problem. However, in IIS8 it doesn't work. (We even turn off firewall to test it) Thanks for helping.

  Read the article

• Server setup scripts, patches and migrations

  - by Ben Swinburne

  I have written some scripts which I use to configure various servers in a uniform way. Each time I deploy a server I run the relevant scripts so that I know they're all configured the same. I then have some patch scripts, which are changes to the originals which I can then run to ensure that modifications to the original set up can be run on each server. E.g. disable.sh - Disable SELinux etc to ensure other scripts all run correctly general.sh - Jailkit, AV, Repos, RKHunter, security tweaks, uninstall unused bits etc web.sh - Installs and configures Apache2 001_update_nr_licence_key.sh - Update a licence key for a piece of software which has changed since its install in general.sh I can run the first 3 without a problem, but when it comes to running patches I am a bit stuck. Is there a sensible way of doing these with some software? My current thought is write to a log file the role of the server be it web or db for example and then note the name of the patch which has run. It could then iterate through a folder to find all patches for that role which it has not yet run and execute them. This seems a bit long winded however. Could someone advise me as to the best way I can keep my servers uniform?

  Read the article

• Forcing a particular SSL protocol for an nginx proxying server

  - by vitch

  I am developing an application against a remote https web service. While developing I need to proxy requests from my local development server (running nginx on ubuntu) to the remote https web server. Here is the relevant nginx config: server { server_name project.dev; listen 443; ssl on; ssl_certificate /etc/nginx/ssl/server.crt; ssl_certificate_key /etc/nginx/ssl/server.key; location / { proxy_pass https://remote.server.com; proxy_set_header Host remote.server.com; proxy_redirect off; } } The problem is that the remote HTTPS server can only accept connections over SSLv3 as can be seen from the following openssl calls. Not working: $ openssl s_client -connect remote.server.com:443 CONNECTED(00000003) 139849073899168:error:140790E5:SSL routines:SSL23_WRITE:ssl handshake failure:s23_lib.c:177: --- no peer certificate available --- No client certificate CA names sent --- SSL handshake has read 0 bytes and written 226 bytes --- New, (NONE), Cipher is (NONE) Secure Renegotiation IS NOT supported Compression: NONE Expansion: NONE --- Working: $ openssl s_client -connect remote.server.com:443 -ssl3 CONNECTED(00000003) <snip> --- SSL handshake has read 1562 bytes and written 359 bytes --- New, TLSv1/SSLv3, Cipher is RC4-SHA Server public key is 1024 bit Secure Renegotiation IS NOT supported Compression: NONE Expansion: NONE SSL-Session: Protocol : SSLv3 Cipher : RC4-SHA <snip> With the current setup my nginx proxy gives a 502 Bad Gateway when I connect to it in a browser. Enabling debug in the error log I can see the message: [info] 1451#0: *16 peer closed connection in SSL handshake while SSL handshaking to upstream. I tried adding ssl_protocols SSLv3; to the nginx configuration but that didn't help. Does anyone know how I can set this up to work correctly?

  Read the article

• Nginx proxy hangs when proxiing to itself

  - by Thomas

  I have Nginx running as a proxy for a number of services including a Geoserver running on port 8080 with the following config: location ^~ /wms/ { rewrite ^/wms/(.*)$ /geoserver/ows$1 break; proxy_pass http://127.0.0.1:8080; proxy_connect_timeout 60s; proxy_read_timeout 150s; } and a proxy service to avoid SOP problems which works as follows: location ^~ /proxy/?targetURL= { rewrite ^/proxy/?targetURL=(.*)$ $1 break; proxy_pass $1; proxy_connect_timeout 60s; proxy_read_timeout 150s; } My web server is also under the same domain, ran by a jetty on port 8888, handled by the same proxy. location / { proxy_pass http://127.0.0.1:8888; proxy_connect_timeout 60s; proxy_read_timeout 150s; } From my web application I make WMS server calls for data via my proxy service. It works fine for external servers but it hangs when I call my own internal geoserver. My geoserver proxy works fine, I can make WMS service queries with the said URL. The call that hangs is basically: http://mywebappdomain.com/proxy/?targetURL=http://mywebappdomain.com/wms/?my_set_of_parameters Which means that the proxy rule applies and the WMS service is called from the same server. Is there an issue with proxying over itself?

  Read the article

• Dynamic subdomain routing

  - by Nader

  Hi everyone, I asked this question over at stackoverflow, but got very few views: http://stackoverflow.com/questions/2284917/route-web-requests-to-different-servers-based-on-subdomain Perhaps it's more applicable to this crowd. Here it is again for convenience: I have a platform where a user can create a new website using a subdomain. There will be thousands of these, eg abc.mydomain.com, def.mydomain.com . Hopefully if we are successful hundreds of thousands. I need to be able to route these domains to a different IPs to point at a particular app server. I have this mapping in a database right now. What are the best practices and recommended technologies here? I see a couple options: Have DNS setup with a wildcard CNAME entry so that all requests go to a single IP where perhaps two machines using heartbeat (for failover) know how to look up the IP in the database and then do an http redirect to the appropriate app server. This seems clunky and slow to me. Run my own DNS server that can be programatically managed such that when a new site is created a DNS entry is added. We also move sites around to different app servers, so I would need to be able to update DNS entries in close to real time. Thoughts anyone? Thanks. Update2: I've setup external wildcard DNS pointing at an HAProxy web server whose job it is to route requests to backend servers. The mapping is stored in our internal PowerDNS server. Question now is how to get the HAProxy server (or another) to use the value of the internal DNS and not some config file or access list? – Update: Based on some suggestions below, it seems like reverse-proxy server(s) is the way to go. As I'll be rebalancing the domain-server mapping, these need to work instantly and the TTL on a DNS solution could be a problem. Any recommendations on software to use considering this domain-IP data is stored in a DB, and I'll need this to be performant?

  Read the article

• How to serve pages through multiple frameworks/template engines efficiently

  - by Leftium

  I would like to render a file that has both PHP tags and Web2Py tags mixed together. To do this, I would like the web server to pass the file through Web2Py, then PHP. I found a method to call PHP from Web2py via Python (based on this method for running PHP on top of django), but this method loses the benefits of any server optimizations from mod_php or FastCGI like caching and multi-threaded operation. A new process is created for each PHP request, which is very slow. Is there a better way to efficiently render pages with both Web2Py(Python) and PHP tags in the same file? Note I am not looking for methods of serving PHP-only and Web2Py-only files from the same server/domain. I prefer solutions for Apache2 or Cherokee. I'm open to using other web servers, though. Background info: I prefer to develop in Web2Py, but we have this pre-existing system written in PHP. I would like to augment the PHP system with some of Web2Py's features like auth authentication/user management and the T() internationalization object. Also it would make it much easier to port the PHP project to Web2Py if it could be done piecemeal. Since the PHP project consists of many files, it would greatly help if they did not need modification.

  Read the article

• Unable to remove Read-Only attribute from folder in Windows XP

  - by elcuco

  I have this directory which I cannot remove the read only attribute from. The computer is running XP SP2 (or SP3, not sure) and the directory sits in a NTFS file system. Looking into the web I found this: http://support.microsoft.com/kb/256614 which tells that if the directory is "customized" it's treated as a system folder and thus "read only". I don't think this is a scenario in my case, but anyway it's not helping, their recommendation is more or less: attr -r -s /d /s d:\data and this is not working for me. Any other ideas? More info: The directory is served to an HTTP server (wamp) and the directory is an SVN check out. What happens is that the web server cannot write files into the directory (imagechace from drupal is you are really interested). Edit 2: The original post claimed that the directory sits on a VFAT FS, however I booted Fedora 11 from livecd and the partition is marked as NTFS. Edit 3: I left the company which I worked on, on which this situation happened... so I cannot fully close this question. But things get even worse: I tested the "attr -r" answer I put, it did not work for me, and now the developer said that it worked for her. A nice WTF moment. Probably a reboot helped... Sorry for loosing details. If anyone has the same problem, and one of the answers helps him - please comment.

  Read the article

• Mercurial internal Setup on Windows 7 - Exception happened during processing of request from ...

  - by Sad0w1nL1ght

  Hy, i have 1 central repository and many locals. On my machine i have local and a central repository too. I can make clone/commit/update/push/pull very easy between the local and central repository on my local machine. but when i want to make a clone from another machine it gets an error. listening at http://MyLocalMachine:8000/ (bound to *:8000) ---------------------------------------- Exception happened during processing of request from ('192.168.0.194', 49319) Traceback (most recent call last): File "SocketServer.pyc", line 558, in process_request_thread File "SocketServer.pyc", line 320, in finish_request File "mercurial\hgweb\server.pyc", line 47, in __init__ File "SocketServer.pyc", line 615, in __init__ File "BaseHTTPServer.pyc", line 329, in handle File "BaseHTTPServer.pyc", line 323, in handle_one_request File "mercurial\hgweb\server.pyc", line 79, in do_GET File "mercurial\hgweb\server.pyc", line 70, in do_POST File "mercurial\hgweb\server.pyc", line 63, in do_write File "mercurial\hgweb\server.pyc", line 127, in do_hgweb File "mercurial\hgweb\hgweb_mod.pyc", line 86, in __call__ File "mercurial\hgweb\hgweb_mod.pyc", line 118, in run_wsgi ErrorResponse ---------------------------------------- The command line wich started the central repo: hg serve -R TT -n TTZoli The command from remote machine for cloning: hg clone --pull http://MyLocalMachine:8000/TT Config for the central repo: [ui] username = MyLocalUserName username = test <[email protected]> with this user i'm trying to acces the central repo [web] push_ssl = false Config for the remote repo: [ui] username = test <[email protected]> [web] push_ssl = false I'm not sure if it's relevant,my firewall is turned off on both machines, and the files in /hg folder are not versioned on the server, except hgignore. Could you please suggest some ideas? What could be the problem? Thanks in advance!

  Read the article

• Redirect local, not internal, requests using SuSEfirewall2 or an iptables rule

  - by James

  I have a server that is running a web application deployed on Tomcat and is sitting in a test network. We're running SuSE 11 sp1 and have some redirection rules for incoming requests. For example we don't bind port 80 in Tomcat's server.xml file, instead we listen on port 9600 and have a configuration line in SuSEfirewall2 to redirect port 80 to 9640. This is because Tomcat doesn't run as root and can't open up port 80. My web application needs to be able to make requests to port 80 since that is the port it will be using when deployed. What rule can I add so that local requests get redirected by iptables? I tried looking at this question: How do I redirect one port to another on a local computer using iptables? but suggestions there didn't seem to help me. I tried running tcpdump on eth0 and then connecting to my local IP address (not 127.0.0.1, but the actual address) but I didn't see any activity. I did see activity if I connected from an external machine. Then I ran tcmpdump on lo, again tried to connect and this time I saw activity. So this leads me to believe that any requests made to my own IP address locally aren't getting handled by iptables. Just for reference he's what my NAT table looks like now: Chain PREROUTING (policy ACCEPT) target prot opt source destination REDIRECT tcp -- anywhere anywhere tcp dpt:http redir ports 9640 REDIRECT tcp -- anywhere anywhere tcp dpt:xfer redir ports 9640 REDIRECT tcp -- anywhere anywhere tcp dpt:https redir ports 8443 Chain POSTROUTING (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination

  Read the article

• Apache 2 Fails to Start After Upgrade with No Errors

  - by Mark Davidson

  Hi all Hoping someone can help me with a server issue. Recently we upgraded to the latest apache on 2 boxes within are organisation. One being the master box the other being for failover. The upgrade went fine on the master box but on the failover box apache fails to start with no errors, being output or logged. Both boxes have the exact same configuration so found this a bit strange. I've reinstalled apache and have been through checking the configs and did not find any obvious errors. Eventally I ran a syntax check on each config file being included and found that one of the files apparently has syntax errors. Invalid command 'Order', perhaps misspelled or defined by a module not included in the server configuration Invalid command 'php_value', perhaps misspelled or defined by a module not included in the server configuration Invalid command 'GeoIPEnable', perhaps misspelled or defined by a module not included in the server configuration I've trippled checked all the modules are enabled but it still fails. I've googled the subject of these errors loads but have been unable to fine a solution. I was wondering if anyone had encountered such a problem before and could point me towards a solution. Thanks for your help in advance. P.s: Apache related versions on server. ii apache2 2.2.3-4+etch10 Next generation, scalable, extendable web se ii apache2-mpm-prefork 2.2.3-4+etch10 Traditional model for Apache HTTPD 2.1 ii apache2-utils 2.2.3-4+etch10 utility programs for webservers ii apache2.2-common 2.2.3-4+etch10 Next generation, scalable, extendable web se ii libapache2-mod-geoip 1.1.8-2 GeoIP support for apache2 ii libapache2-mod-php5 5.2.0+dfsg-8+etch15 server-side, HTML-embedded scripting languag

  Read the article

• fcgiwrap listening to a unix socket file: how to change file permissions

  - by user36520

  I have a web server (nginx) and a CGI application (gitweb) that is ran with fcgiwrap to enable Fast CGI access to it. I want the Fast CGI protocol to take place over a unix socket file. To start the fcgiwrap daemon, I run: setuidgid git fcgiwrap -s "unix:$PWD/fastcgi.sock" (this is a daemontools daemon) The problem is that my web server runs as the user www-data and not the user git. And fcgiwrap creates the socket fastcgi.sock with user git, group git and read only fort the non owner. Thus, nginc with the user www-data can't access the socket. Apparently, fcgiwrap is not able to select permissions of unix socket files. And this is quite annoying. Moreover, if I manage to have the socket file exists before I run fcgiwrap (which is quite difficult given I did not find any shell command to create a socket file), it quits with the following error: Failed to bind: Address already in use The only solution I found is to start the server the following way: rm -f fastcgi.sock # Ensure that the socket doesn't already exists (sleep 5; chgrp www-data fastcgi.sock; chmod g+w fastcgi.sock) & exec setuidgid git fcgiwrap -s "unix:$PWD/fastcgi.sock" Which is far from the most elegant solution. Can you think of anything better ? Thanks

  Read the article

• Accessing Virtual Host from outside LAN

  - by Ray

  I'm setting up a web development platform that makes things as easy as possible to write and test all code on my local machine, and sync this with my web server. I setup several virtual hosts so that I can access my projects by typing in "project" instead of "localhost/project" as the URL. I also want to set this up so that I can access my projects from any network. I signed up for a DYNDNS URL that points to my computer's IP address. This worked great from anywhere before I setup the virtual hosts. Now when I try to access my projects by typing in my DYNDNS URL, I get the 403 Forbidden Error message, "You don't have permission to access / on this server." To setup my virtual hosts, I edited two files - hosts in the system32/drivers/etc folder, and httpd-vhosts.conf in the Apache folder of my WAMP installation. In the hosts file, I simply added the server name to associate with 127.0.0.1. I added the following to the http-vhosts.conf file: <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot "c:/wamp/www/ladybug" ServerName ladybug ErrorLog "logs/your_own-error.log" CustomLog "logs/your_own-access.log" common </VirtualHost> <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot "c:/wamp/www" ServerName localhost ErrorLog "logs/localhost-error.log" CustomLog "logs/localhost-access.log" common </VirtualHost> Any idea why I can't access my projects from typing in my DYNDNS URL? Also, is it possible to setup virtual hosts so that when I type in http://projects from a random computer outside of my network, I access url.dyndns.info/projects (a.k.a. my WAMP projects on my home computer)? Help is much appreciated, thanks!

  Read the article

• What's the best way to run Drupal and Django sites behind the same Varnish server?

  - by Alexis Bellido

  I have a high traffic website running with Drupal and Apache, five web servers behind a Varnish server load balancing. Let's say this site is example.com. I'm using five backends and a director like this in my default.vcl: director balancer round-robin { { .backend = web1; } { .backend = web2; } { .backend = web3; } { .backend = web4; } { .backend = web5; } } Now I'm working on a new Django project that will be a new section of this site running on example.com/new-section. After checking the documentation I found I can do something like this: sub vcl_recv { if (req.url ~ "^/new-section/") { set req.backend = newbackend; } else { set req.backend = default; } } That is, using a different backend for a subdirectory /new-section under the same domain. My question is, how do I make something like this work with my director and load balancing setup? I'm probably going to run two or more web servers (backends) with my new Django project, each one with a mix of Gunicorn, Nginx, and a few Python packages, and would like to put all of those in their own Varnish director to load balance. Is it possible to do use the above approach to decide which director to use?, like this: sub vcl_recv { if (req.url ~ "^/new-section/") { set req.director = newdirector; } else { set req.director = balancer; } } All suggestions welcome. Thanks!

  Read the article

• ports only available from the outside network

  - by ChrisJ

  This is a counter-intuitive problem for me. I have a new Win 2003 server on a static IP address w.x.y.z. Tomcat 7, PostgreSQL 9.1, and Subversion are installed. All of it appears to be working fine from the server itself. We can also access the Tomcat manager, web applications, and run "svn ls svn://w.x.y.z/" from outside our network. However, when I try from another machine in the office, phpPgAdmin and svn cannot establish connections with the server. http://w.x.y.z:5432/phppgadmin cannot connect. The svn command from above returns: svn: E730061: Unable to connect to a repository at URL 'svn://w.x.y.z/' svn: E730061: Can't connect to host 'w.x.y.z': No connection could be made because the target machine actively refused it. Tomcat manager and the other web apps we have deployed work fine. Netstat -a from the server shows this: Proto Local Address Foreign Address State TCP SERVERNAME:3690 SERVERNAME:0 LISTENING TCP SERVERNAME:5432 SERVERNAME:0 LISTENING Windows Firewall was off, but just in case I also tried to enable it and open ports 3690 (svn) and 5432 (postgres). No change. I don't have access to the router/switch because it just doesn't work that way in Port-au-Prince and our sysadmin is on R&R. Is there anything that might be causing the problem from the server side?

  Read the article

• Measure Total Bandwidth for Billing

  - by TonyZ

  I am setting up a new network which customers will host their applications on. It needs to be able to scale out to a few hundred servers and each server will have several VMs on it. Right now in my test environment, after the telco router, we are using a Linux router/firewall which is then connected to a Layer 2 switch. Could be a layer 3 in the future. I need to track total bandwidth per VM for each machine, and I need to do it in a way that it is not part of the VM. Each VM will have a private class ip address which is Natted by the gateway, or we may eventually run more than firewall/reverse proxy off a layer 3 switch. So my thinking is that I can do it off of a promiscuous port on the switches, or at the gateway firewall. I would like to have an out of the box solution, preferably open source. Does anyone have suggestions on the easiest way to set this up, and the easiest tool to use. I have looked at the web sites for Nagios, Zenoss, Zabbix, ntops on the firewall, etc. It is hard to ascertain just from the web sites if they do exactly this or not. Obviously, performance is also somewhat key here. Anything running on the gateway should not drag it down doing traffic accounting. Thanks for any thoughts. Tony Zakula

  Read the article

• Sharepoint Central Administration stuck / high CPU usage

  - by johnnyb10

  I'm using WSS 3 and I recently added a new web application to my SharePoint Server. After adding it, I wasn't able to open the Central Administration site. I also noticed that there was a w3wp.exe error (Event ID 1000) in the Event Viewer. The situation now is that the w3wp.exe process is hovering around 50% CPU usage continuously. I installed a program called IIS Peek, and it shows continuous GET requests on the Central Administration site; this happens even if I stop the Central Administration site in IIS. The IP addresses identified in the GET request is my workstation, which is what I used to attempt to access Central Administration after I created the new web application. Can someone explain what's going on and how I might fix it? It seems as if my computer tried to access Central Administration and then it hung, but the page requests that were happening at the time are somehow continuing over and over again. So my two problems are the inability to access Central Administration, and the CPU Usage of w3wp.exe, which I'm assuming are two symptoms of the same problem. I'd like to know if there's anything I can do besides restarting IIS, because we have clients accessing other sites on this server. Thanks.

  Read the article

• Fully FOSS EMail solution

  - by Ravi

  I am looking at various FOSS options to build a robust EMail solution for a government funded university. Commercial options are to be chosen only in the worst case scenario. Here are the requirements: Approx 1000-1500 users - Postfix or Exim? (Sendmail is out;-)) Mailing lists for different groups/Need web based archive - Mailman? Sympa? Centralised identity store - OpenLDAP? Fedora 389DS? Secure IMAP only - no POP3 required - Courier? Dovecot? Cyrus?? Anti Spam - SpamAssasin? what else? Calendaring - ?? webmail - good to have, not mandatory - needs to be very secure...so squirrelmail is out;-)? Other questions: What mailbox storage format to use? where to store? database/file system? Simple and effective HA options? Is there a web proxy equivalent to squid in the mail server world? software load balancers?CARP? Monitoring and alert? Backup? The govt wants to stimulate the local economy by buying hardware locally from whitebox vendors. Also local consultants and university students will do the integration. We looked at out-of-the-box integrated solutions like Axigen, Zimbra and GMail but each was ruled out in favour of a DIY approach in the hopes of full control over the data and avoiding vendor lockin - which i though was a smart thing to do. I wish more provincial governments in the developing world think of these sort of initiatives As for OS - Debian, FreeBSD would be first preference. Commercial OS's need not apply. CentOS as second tier option...

  Read the article

• Diagnosing Microsoft SQL Server error 9001: The log for the database is not available.

  - by Scott Mitchell

  Over the weekend a website I run stopped functioning, recording the following error in the Event Viewer each time a request is made to the website: Event ID: 9001 The log for database 'database name' is not available. Check the event log for related error messages. Resolve any errors and restart the database. The website is hosted on a dedicated server, so I am able to RDP into the server and poke around. The LDF file for the database exists in the C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA folder, but attempting to do any work with the database from Management Studio results in a dialog box reporting the same error - 9001: The log for database is not available... This is the first time I've received this error, and I've been hosting this site (and others) on this dedicated web server for over two years now. It is my understanding that this error indicates a corrupt log file. I was able to get the website back online by Detaching the database and then restoring a backup from a couple days ago, but my concern is that this error is indicative of a more sinister problem, namely a hard drive failure. I emailed support at the web hosting company and this was their reply: There doesn't appear to be any other indications of the cause in the Event Log, so it's possible that the log was corrupted. Currently the memory's resources is at 87%, which also may have an impact but is unlikely. Can the log just "become corrupted?" My question: What are the next steps I should take to diagnose this problem? How can I determine if this is, indeed, a hardware problem? And if it is, are there any options beyond replacing the disk? Thanks

  Read the article

• Do any well-known CAs issue Elliptic Curve certificates?

  - by erickson

  Background I've seen that Comodo has an elliptic curve root ("COMODO ECC Certification Authority"), but I don't see mention of EC certificates on their web site. Does Certicom have intellectual property rights that prevent other issuers from offering EC certificates? Does a widely-used browser fail to support ECC? Is ECC a bad fit for traditional PKI use like web server authentication? Or is there just no demand for it? I'm interested in switching to elliptic curve because of the NSA Suite B recommendation. But it doesn't seem practical for many applications. Bounty Criteria To claim the bounty, an answer must provide a link to a page or pages at a well-known CA's website that describes the ECC certificate options they offer, prices, and how to purchase one. In this context, "well-known" means that the proper root certificate must be included by default in Firefox 3.5 and IE 8. If multiple qualifying answers are provided (one can hope!), the one with the cheapest certificate from a ubiquitous CA will win the bounty. If that doesn't eliminate any ties (still hoping!), I'll have to choose an answer at my discretion. Remember, someone always claims at least half of the bounty, so please give it a shot even if you don't have all the answers.

  Read the article

• Windows 2012 RDS Temporary profile for Administrator

  - by Fabio

  I've configured a Windows 2012 RDS Farm with two virtual servers (VMWare - each one on a different ESX server). Both servers have Licensing, Web Access, Gateway, Connection Broker and Session Host roles. High Availability is set up and it works fine. Remote Apps are working and even Windows XP clients have access to the web interface. User profile path is \vmfiles1\UserProfileDisks\App\ and almost everyone has full right access to it. The problem I have is that I would like to be able to access both servers at the same time with the Administrator account (console), but each time I try, the second server that I logon to give me access with a temporary profile. I tried to enable/disable multiple sessions per user and forced Admin logoff with the GPO but nothing changed. Another thing is that the server pool is not saved, so each time I restart the RDS server or I logoff from it, I have to add a server in the server manager. Do you have any idea? Sorry if my english is not perfect.

  Read the article

• EC2: is an instance's public DNS stable? Can I rely on it not changing?

  - by Aseem Kishore

  I'm new to Amazon EC2. I've launched my first instance, and am using it as a web server. I see that it has a public DNS (a public URL), e.g.: ec2-123-45-6-789.compute-1.amazonaws.com I can successfully go to this server in my browser, hit it via cURL, etc. I want to use this web server for a back-end service in an app I'm building, so I placed this URL in my app's config, and it works great. But when I manually stop and re-started my instance, I see that the public DNS changes! I've read that this happens when you explicitly stop and re-start, but doesn't happen if you just "reboot". I don't plan on explicitly stopping and re-starting this server ever, but my question is: will this public DNS ever change on its own for any reason? E.g. if the machine abnormally crashes, or whatever. In other words, is it safe to ship an app that's wired to this URL? Thanks!

  Read the article

< Previous Page | 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054  | Next Page >