Search Results

Search found 18488 results on 740 pages for 'android networking'.

Page 105/740 | < Previous Page | 101 102 103 104 105 106 107 108 109 110 111 112  | Next Page >

  • Get an Arduino and Android phone to communicate over the web

    - by Saleem
    I am writing an Android application to communicate with my Arduino over the web. The Arduino is running a web server through an Ethernet shield. I am attaching my code, but I will explain it here so you will understand what I am trying to do. The Android sends an HTTP request in the format http://192.168.1.148/?Lights=1. The Arduino gets the request, executes the command (in this case turning on some lights) and then responds to the Android device by simply sending the string "Lights=On". The Android will then change the color of the button to notify the user that the command was executed successfully. The Arduino is getting the instruction and executing it and sending the response but my button color is not changing. I know that the Android device is getting the string because I added a debug line to change the text on the button to the received response. The relevant code for the Android device is: ((Button) v).setText(sb.toString()); //This works and the button text changes to "Lights=On". //Test response and update button if(sb.toString()=="Lights=On"){ v.getBackground().setColorFilter(0xFFFFFF00, PorterDuff.Mode.MULTIPLY); Drawable d = lightOff.getBackground(); lightOff.invalidateDrawable(d); d.clearColorFilter(); } The Arduino code is: if(s=="Lights"){ switch(client.read()){ case '0': digitalWrite(LightPin,0); client.print("Lights=Off"); //debug Serial.println("Lights=Off"); break; case '1': digitalWrite(LightPin,1); client.print("Lights=On"); Serial.println("Lights=On"); break; } } Please let me know if you need more of the code to answer this question.

    Read the article

  • Issue with 'Hello Android' tutorial

    - by Mike Needham
    I am brand new to Eclipse and Android, but somewhat familiar with Java. That having been said, I tried to follow the 'Hello Android' tutorial from the developer site using the latest Eclipse (Galieo) and the 2.1 Android SDK, I am on a Macintosh running Snow Leopard (OS X 10.6). I have a default virtual device (though my target is actually for phones like my own HTC Incredible which has the snapdragon processor and of course all the latest accoutrement in smart phones. Everything seemed to go okay until I went to RUN>RUN and then selected 'Android Application'. My computer spins it's wheels for a while and then I see two errors. I have pasted the output below: [2010-05-04 01:53:46 - HelloAndroid] ------------------------------ [2010-05-04 01:53:46 - HelloAndroid] Android Launch! [2010-05-04 01:53:46 - HelloAndroid] adb is running normally. [2010-05-04 01:53:46 - HelloAndroid] Performing com.example.helloandroid.HelloAndroid activity launch [2010-05-04 01:53:46 - HelloAndroid] Automatic Target Mode: launching new emulator with compatible AVD 'myAVD' [2010-05-04 01:53:46 - HelloAndroid] Launching a new emulator with Virtual Device 'myAVD' [2010-05-04 01:53:58 - HelloAndroid] New emulator found: emulator-5554 [2010-05-04 01:53:58 - HelloAndroid] Waiting for HOME ('android.process.acore') to be launched... [2010-05-04 01:53:59 - Emulator] 2010-05-04 01:53:59.501 emulator[10398:903] Warning once: This application, or a library it uses, is using NSQuickDrawView, which has been deprecated. Apps should cease use of QuickDraw and move to Quartz. [2010-05-04 01:54:23 - HelloAndroid] emulator-5554 disconnected! Cancelling 'com.example.helloandroid.HelloAndroid activity launch'! I never do see the text in the emulator and the emulator crashes with a message about it quitting unexpectedly. The actual code is line by line from the tutorial and I have never been able to get to the XML part yet. I am not sure what is wrong with my environment setup or if it is just an incompatibility with Snow Leopard? I would REALLY appreciate any help in resolving this as I am very interested in developing on this platform. Thank-you, Mike N Lawrence, Kansas

    Read the article

  • Android shared library which is not JNI based

    - by Mondain
    I am developing a library for Android applications which does not use native code (JNI). I have tried suppling the library as an external jar in my Android projects but this method does not include the library contents in the apk and thus throws class not found errors when run in the emulator or device. I have also tried creating the library as an Android project in itself and this does work, but only for public static properties (not methods). With the library and application both being in separate apk's I can see that the VM notices references to the library and can read some properties, but when an attempt to instantiate a class in the library is executed I get class not found even though I can read the public static properties from it (very frustrating!!). I realize that Davlik byte code is not the same as Java byte code but I am having trouble even finding good information about how to solve what would seem to be a very simple issue in Android. I am looking into the old PlatformLibrary stuff right now but I am not convinced this will work either since the sample has been removed from the Android site :( So help me out if you can, if I find the answer before this happens I will share it. viva la Android!

    Read the article

  • eclipse error with android: id cannot be resolved or is not a field

    - by Jaynathan Leung
    Hi, I just started playing around with android development, and already with just an attempt at making a button, I have encountered a problem. The error I'm given in the following code is right on "R.id.button1". It says id cannot be resolved or is not a field. Do I need to manually reference every single object I make in the layout xml file? I found that this did work, but it does seem to be a bit much for every button I want to make... package com.example.helloandroid; import android.app.Activity; import android.os.Bundle; import android.view.View; import android.view.View.OnClickListener; import android.widget.Button; public class HelloAndroid extends Activity { /** Called when the activity is first created. */ private Button button1; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.main); button1 = (Button)findViewById(R.id.button1); button1.setOnClickListener(new OnClickListener() { public void onClick(View v) { finish(); } }); } }

    Read the article

  • Android Unit Testing - Resolution & Verification Problems

    - by Bill
    I just switched the way my Android project is being built and non of my unit tests work any more...I get errors like WARN/dalvikvm(575): VFY: unable to resolve static field X in ..... WARN/dalvikvm(575): VFY: unable to find class referenced in signature These errors only come from my Unit Tests, where classes defined in it can't even see other classes defined in the unit test. Before each project had its own directory with copies of the 3rd party jar files. I've read around that Dex does weird things with references but haven't been able to figure out how to fix this problem. Is there a better way to do this? I would love to see an example of a large Android workspace where there are multiple projects, jar references, etc... Is it possible to fix this with an Order/Export tweak ? The project is structured like this: Eclipse Workspace (PROJECT_HOME classpath variable) lib 3rd-party jars android.jar Java Project A Looks in PROJECT_HOME Java Project B Looks in PROJECT_HOME Depends on project A Android Project Depends on A & B Looks in PROJECT_HOME Android Test Project Depends on A , B, Android Project Looks in PROJECT_HOME

    Read the article

  • Android app with library can't find the library.apk

    - by Dean Schulze
    I'm trying to get the FinchVideo example from the Programming Android book to work. It uses the FinchWelcome library. I've set up FinchWelcome as a Library and in the FinchVideo application I have checked the FinchWelcome library in Properties - Android. When I try to run FinchVideo in the emulator it complains that it cannot find FinchWelcome.apk (output below). I'm building for Android 4.0.3. While Googling for this problem I've found that a lot of people have this problem with Android apps that use libraries. No one seems to have found a solution that works consistently, though. None of the Android books I've seen even talk about how to download libraries. What is the proper way to handle libraries in Android applications? Is this a bug in the Eclipse ADT? Thanks. [FinchVideo] Installing FinchVideo.apk... [FinchVideo] Success! [FinchWelcome] Could not find FinchWelcome.apk! [FinchVideo] Starting activity com.oreilly.demo.pa.finchvideo.FinchVideoActivity on device emulator-5554

    Read the article

  • including pre-built java classes into an android project

    - by moonlightcheese
    i'm trying to include a maven java project into my android project. the maven project is the greader-unofficial project which allows developers access to google reader accounts, and handles all of the http transactions and URI/URL building, making grabbing feeds and items from google reader transparent to the developer. the project is available here: http://code.google.com/p/greader-unofficial/ the code is originally written for the standard jdk and uses classes from java.net that are not a part of the standard Android SDK. i actually tried to manually resolve all dependencies and ran into a problem when i got as far as including com.sun.syndication pieces required by the class be.lechtitseb.google.reader.api.util.AtomUtil.java... some of the classes in java.net that are in the standard jdk (i'm using 1.6) are not in the Android SDK. in addition, resolving all of these dependencies manually is just ridiculous when i'm compiling a maven project that should be pretty simple. however, i can use maven to compile the sources with no issue. how can i include this maven project, which is dependent on the complete jdk, into my android project in such a way that it will compile so that i can access the GoogleReader class from my android project? and for the record, i don't have the expertise to rewrite this entire api to work with the standard Android SDK.

    Read the article

  • Move and rename file in android

    - by Andre Fróes
    I am trying to copy a file to another folder in the android, but so far, i got no success. I manage to do so with a selected image and when taking a photo, but not with files. I've read and tried several solutions passed by the community (searched over the forum and the internet), but none of it was able to solve my problem when copying. First things first. I added the permissions to my manifest: <uses-permission android:name="android.permission.WRITE_EXTERNAL_STORAGE" /> <uses-permission android:name="android.permission.READ_EXTERNAL_STORAGE" /> after that, before copying a file, i print its filepath and the directory file path: 06-10 11:11:11.700: I/System.out(1442): /mimetype/storage/sdcard/Misc/Javascript erros for Submit and Plan buttons in IE.doc 06-10 11:11:11.710: I/System.out(1442): /storage/sdcard/mywfm/checklist-files both exists: to copy the file to the expected folder I used the FileUtils: try { FileUtils.copyFile(selectedFile, dir); } catch (IOException e) { // TODO Auto-generated catch block e.printStackTrace(); } The problem is: I get no exception and the file isn't there. I tried this solution either: How to move/rename file from internal app storage to external storage on Android? same thing, no exception, but no file either.

    Read the article

  • Linux e1000e (Intel networking driver) problems galore, where do I start?

    - by Evan Carroll
    I'm currently having a major problem with e1000e (not working at all) in Ubuntu Maverick (1.0.2-k4), after resume I'm getting a lot of stuff in dmesg: [ 9085.820197] e1000e 0000:02:00.0: PCI INT A disabled [ 9089.907756] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k4 [ 9089.907762] e1000e: Copyright (c) 1999 - 2009 Intel Corporation. [ 9089.907797] e1000e 0000:02:00.0: Disabling ASPM L1 [ 9089.907827] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9089.907857] e1000e 0000:02:00.0: setting latency timer to 64 [ 9089.908529] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X [ 9089.908922] e1000e 0000:02:00.0: Disabling ASPM L0s [ 9089.908954] e1000e 0000:02:00.0: (unregistered net_device): PHY reset is blocked due to SOL/IDER session. [ 9090.024625] e1000e 0000:02:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:0a:e4:3e:ce:74 [ 9090.024630] e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection [ 9090.024712] e1000e 0000:02:00.0: eth0: MAC: 2, PHY: 2, PBA No: 005302-003 [ 9090.109492] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X [ 9090.164219] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X and, a bunch of [ 2128.005447] e1000e 0000:02:00.0: eth0: Detected Hardware Unit Hang: [ 2128.005452] TDH <89> [ 2128.005454] TDT <27> [ 2128.005456] next_to_use <27> [ 2128.005458] next_to_clean <88> [ 2128.005460] buffer_info[next_to_clean]: [ 2128.005463] time_stamp <6e608> [ 2128.005465] next_to_watch <8a> [ 2128.005467] jiffies <6f929> [ 2128.005469] next_to_watch.status <0> [ 2128.005471] MAC Status <80080703> [ 2128.005473] PHY Status <796d> [ 2128.005475] PHY 1000BASE-T Status <4000> [ 2128.005477] PHY Extended Status <3000> [ 2128.005480] PCI Status <10> I decided to compile the latest stable e1000e to 1.2.17, now I'm getting: [ 9895.678050] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.17-NAPI [ 9895.678055] e1000e: Copyright(c) 1999 - 2010 Intel Corporation. [ 9895.678098] e1000e 0000:02:00.0: Disabling ASPM L1 [ 9895.678129] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9895.678162] e1000e 0000:02:00.0: setting latency timer to 64 [ 9895.679136] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X [ 9895.679160] e1000e 0000:02:00.0: Disabling ASPM L0s [ 9895.679192] e1000e 0000:02:00.0: (unregistered net_device): PHY reset is blocked due to SOL/IDER session. [ 9895.791758] e1000e 0000:02:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:0a:e4:3e:ce:74 [ 9895.791766] e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection [ 9895.791850] e1000e 0000:02:00.0: eth0: MAC: 3, PHY: 2, PBA No: 005302-003 [ 9895.892464] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X [ 9895.948175] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X [ 9895.949111] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9895.954694] e1000e: eth0 NIC Link is Up 10 Mbps Full Duplex, Flow Control: RX/TX [ 9895.954703] e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO [ 9895.955157] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 9906.832056] eth0: no IPv6 routers present With 1.2.20 I get: [ 9711.525465] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-NAPI [ 9711.525472] e1000e: Copyright(c) 1999 - 2010 Intel Corporation. [ 9711.525521] e1000e 0000:02:00.0: Disabling ASPM L1 [ 9711.525554] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9711.525586] e1000e 0000:02:00.0: setting latency timer to 64 [ 9711.526460] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X [ 9711.526487] e1000e 0000:02:00.0: Disabling ASPM L0s [ 9711.526523] e1000e 0000:02:00.0: (unregistered net_device): PHY reset is blocked due to SOL/IDER session. [ 9711.639763] e1000e 0000:02:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:0a:e4:3e:ce:74 [ 9711.639771] e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection [ 9711.639854] e1000e 0000:02:00.0: eth0: MAC: 3, PHY: 2, PBA No: 005302-003 [ 9712.060770] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X [ 9712.116195] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X [ 9712.117098] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9712.122684] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 9712.122693] e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO [ 9712.123142] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 9722.920014] eth0: no IPv6 routers present But, I'm still getting these [ 9982.992851] PCI Status <10> [ 9984.993602] e1000e 0000:02:00.0: eth0: Detected Hardware Unit Hang: [ 9984.993606] TDH <5d> [ 9984.993608] TDT <6b> [ 9984.993611] next_to_use <6b> [ 9984.993613] next_to_clean <5b> [ 9984.993615] buffer_info[next_to_clean]: [ 9984.993617] time_stamp <24da80> [ 9984.993619] next_to_watch <5d> [ 9984.993621] jiffies <24f200> [ 9984.993624] next_to_watch.status <0> [ 9984.993626] MAC Status <80080703> [ 9984.993628] PHY Status <796d> [ 9984.993630] PHY 1000BASE-T Status <4000> [ 9984.993632] PHY Extended Status <3000> [ 9984.993635] PCI Status <10> [ 9986.001047] e1000e 0000:02:00.0: eth0: Reset adapter [ 9986.176202] e1000e: eth0 NIC Link is Up 10 Mbps Full Duplex, Flow Control: RX/TX [ 9986.176211] e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO I'm not sure where to start troubleshooting this. Any ideas? Here is the result of ethtool -d eth0 MAC Registers ------------- 0x00000: CTRL (Device control register) 0x18100248 Endian mode (buffers): little Link reset: reset Set link up: 1 Invert Loss-Of-Signal: no Receive flow control: enabled Transmit flow control: enabled VLAN mode: disabled Auto speed detect: disabled Speed select: 1000Mb/s Force speed: no Force duplex: no 0x00008: STATUS (Device status register) 0x80080703 Duplex: full Link up: link config TBI mode: disabled Link speed: 10Mb/s Bus type: PCI Express Port number: 0 0x00100: RCTL (Receive control register) 0x04048002 Receiver: enabled Store bad packets: disabled Unicast promiscuous: disabled Multicast promiscuous: disabled Long packet: disabled Descriptor minimum threshold size: 1/2 Broadcast accept mode: accept VLAN filter: enabled Canonical form indicator: disabled Discard pause frames: filtered Pass MAC control frames: don't pass Receive buffer size: 2048 0x02808: RDLEN (Receive desc length) 0x00001000 0x02810: RDH (Receive desc head) 0x00000001 0x02818: RDT (Receive desc tail) 0x000000F0 0x02820: RDTR (Receive delay timer) 0x00000000 0x00400: TCTL (Transmit ctrl register) 0x3103F0FA Transmitter: enabled Pad short packets: enabled Software XOFF Transmission: disabled Re-transmit on late collision: enabled 0x03808: TDLEN (Transmit desc length) 0x00001000 0x03810: TDH (Transmit desc head) 0x00000000 0x03818: TDT (Transmit desc tail) 0x00000000 0x03820: TIDV (Transmit delay timer) 0x00000008 PHY type: IGP2 and ethtool -c eth0 Coalesce parameters for eth0: Adaptive RX: off TX: off stats-block-usecs: 0 sample-interval: 0 pkt-rate-low: 0 pkt-rate-high: 0 rx-usecs: 3 rx-frames: 0 rx-usecs-irq: 0 rx-frames-irq: 0 tx-usecs: 0 tx-frames: 0 tx-usecs-irq: 0 tx-frames-irq: 0 rx-usecs-low: 0 rx-frame-low: 0 tx-usecs-low: 0 tx-frame-low: 0 rx-usecs-high: 0 rx-frame-high: 0 tx-usecs-high: 0 tx-frame-high: 0 Here is also the lspci -vvv for this controller 02:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller Subsystem: Lenovo ThinkPad X60s Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 45 Region 0: Memory at ee000000 (32-bit, non-prefetchable) [size=128K] Region 2: I/O ports at 2000 [size=32] Capabilities: [c8] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME- Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0300c Data: 415a Capabilities: [e0] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <128ns, L1 <64us ClockPM+ Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap- ChkEn- Capabilities: [140 v1] Device Serial Number 00-0a-e4-ff-ff-3e-ce-74 Kernel driver in use: e1000e Kernel modules: e1000e I filed a bug on this upstream, still no idea how to get more useful information. Here is a the result of the running that script EEPROM FIX UPDATE $ sudo bash fixeep-82573-dspd.sh eth0 eth0: is a "82573L Gigabit Ethernet Controller" This fixup is applicable to your hardware Your eeprom is up to date, no changes were made Do I still need to do anything? Also here is my EEPROM dump $ sudo ethtool -e eth0 Offset Values ------ ------ 0x0000 00 0a e4 3e ce 74 30 0b b2 ff 51 00 ff ff ff ff 0x0010 53 00 03 02 6b 02 7e 20 aa 17 9a 10 86 80 df 80 0x0020 00 00 00 20 54 7e 00 00 14 00 da 00 04 00 00 27 0x0030 c9 6c 50 31 3e 07 0b 04 8b 29 00 00 00 f0 02 0f 0x0040 08 10 00 00 04 0f ff 7f 01 4d ff ff ff ff ff ff 0x0050 14 00 1d 00 14 00 1d 00 af aa 1e 00 00 00 1d 00 0x0060 00 01 00 40 1f 12 07 40 ff ff ff ff ff ff ff ff 0x0070 ff ff ff ff ff ff ff ff ff ff ff ff ff ff 4a e0 I'd also like to note that I used eth0 every day for years and until recently never had an issue.

    Read the article

  • Wifi connection issues for Android with Linksys WRT54G

    - by Paul
    I have had this Linksys WRT54G for many years now, and it has always worked without a hassle. But for some reason I am unable to connect my brand new Android phone (Magic). The wireless network is broadcast and simply secured using WPA PSK TKIP. My phone sees the network (with excellent signal strength) and correctly asks me for the WPA password. Then when it tries to connect it stays for a while on "Retrieving address..." (liberately translated from Dutch) and finally fails reading "Remember, secured with WPA". Does anybody know how to solve this issue? edit: the android phone is genuine (not modified/rooted or whatsoever).

    Read the article

  • Gateway time out connecting to tethered server from Android

    - by BentFX
    I've got an Android device running android-wifi-tether. It works as advertised. I connect to it from my Ubuntu 12.04 laptop running Apache 2.2.22. The laptop is manually configured to IP 192.168.2.100 in the hosts file. It can ping itself and access it's own web server through that address. The WiFi tether hotspot gives the laptop the same 192.168.2.100 address(Laptop was configured to match the hotspot address as a troubleshooting step, and could be wrong.) Using ping I can ping the laptop from the phone using the 192.168.2.100 address. Using portscan the phone shows port 80 open on the 192.168.2.100 address. So, everything looks like it's in place, but any attempt to browse to http://192.168.2.100 fails after a few moments with a 504(Gateway time out) Any help would certainly be help.

    Read the article

  • Are there any advantages of GO Widgets over vanilla Android Widgets

    - by Supuhstar
    I use a suite of GO programs on my Android 4.1.2 device. Most relevant to this question, I've installed the GO Launcher EX and GO Weather, and they've recently given me the choice of one paid Go Weather Widget skin for free. Here, my conundrum lies: The skin I want comes in two versions: one for the GO Widget (can only be used on GO Launcher EX) and one for the vanilla Android widget. Are there any advantages for me choosing the GO Widget? I'm thinking things like increased performance because it'd be better integrated into the GO ecosystem, or more options, or something along these lines.

    Read the article

  • mime-attachment incompatibility on forwarded messages from android to an iphone

    - by Peter Carrero
    A couple of guys got the evo android in the office. I got an iphone. When I receive a forwarded email from one of those phones, the forwarded piece comes as a mime-attachment that the iphone cannot open. I also tried this with a motorola droid and got the same result. I am not sure if the issue is the android sending the message on the wrong format or the iphone not being able to understand a mime type that it should... Has anyone experienced this, and, most importantly, found a fix/workaround? Thanks.

    Read the article

  • Android Software for the SysAdmin on the move.

    - by GruffTech
    So my company has over service through Verizon, and AT&T Service in the area is "shoddy" at its best, so i haven't been able to join the "iPhone party" like so many of my fellow SysAdmins have been able to. That being said, this week finally i phone i like has hit Verizon, the HTC Incredible. (I've been waiting for the Desire or Nexus One, but after seeing spec sheets and reviews, HTC Incredible comes out ahead anyway). So (finally) I'm looking for Android Apps that are "gotta-haves" for System Admins. I've found the bottom three, If there's others you prefer over these let me know. RDP Program - RemoteRDP SSH Client - ConnectBot Nagios - NagMonDroid Reply with your favorite Android App and Why!

    Read the article

  • Android Jelly Bean: fix search button [migrated]

    - by Jon Rodriguez
    I just upgraded my Nexus S from Android 4.0.something (I forget the subversion) to Android 4.1.1. The magnifying glass button used to be really useful -- it would trigger a search function within whatever app I was using. For example pressing it within the Maps app would search for a place, or pressing it within the Facebook app would search for a friend. But now, the magnifying glass button launches a google search no matter what the context is! This is extremely annoying and makes a lot of apps harder to use, especially Maps. How can I use a setting or a patch to revert the magnifying glass button to its old behavior?

    Read the article

  • How to configure networking on an appliance such that it can plug and play on any corporate network?

    - by Joshua Lim
    I had a chance to configure a Moxa NPort device server appliance on my client's network, it was very easy to do so, done in just 2 minutes. Here's what I did:- The Moxa device server had a preset IP address of 192.168.127.254 and subnet mask 255.255.255.0 - http://www.moxa.com/doc/manual/nport/5400/NPort_5400_Series_Users_Manual_v4.pdf Moxa provides a Windows software which I used to "scan" for the device server. It worked like magic! The software returns a list of device servers found. Each device server is identified by MAC address, and by selecting the device server using the software, I can reset the default IP address and subnet mask of that device server! In comparison, during an earlier project, I spent 2 hours trying to get KVM to work for a Windows 7 embedded appliance I'm trying to install in my client's network - http://superuser.com/questions/380305/how-to-configure-windows-7-professional-appliance-pc-on-my-clients-network-usin Prior to that, I have already tried pre-configuring the IP address and subnet mask to the one which my client provided, yet the appliance still can't connect to the client's network! I've also tried cross cable, didn't work either. After KVM worked, I discovered that the network settings were "lost" after I plug the machine into the client's network. Now my question is what can I do to setup my Windows 7 embedded appliance so that it can connect to any network like that the Moxa device server? I tried experimenting this on my network using a Windows machine configured to an IP address of 192.168.127.254 and subnet mask 255.255.255.0, but it doesn't connect to my network that uses 192.168.0.*. :( EDIT: I would like to point out that the Moxa Windows configuration software seems to be able to connect to any Moxa device connected to the network even if it is on a different subnet, as long as the network adapter shows "connected". This is important because the Moxa device has no VGSM port or interface to configure the IP address.

    Read the article

  • Hyper-V networking....still not sure which way to go??

    - by CZhale
    We have our Hyper-V server up and running (Windows 2008 ENT SP2) and started to create some of our VMs. The server has 4 total nics. 2 onboard Broadcom 1gb nic cards and a pci dual port Intel Pro cards 1gb. Right now, I have setup 1 broadcom nic to be the hyper-v host nic, and setup the other broadcom nic for the VMs. We are not using the Intel Nics....should we be thinking about teaming?Link Aggregation?? I just want to achieve the best possible setup for the network, but have read many things for and against teaming the nics?? Thoughts?

    Read the article

  • Is there a global inbox for android?

    - by Loony2nz
    I'm a Blackberry fan and I have been aching to get a phone with a better UI (and not the jesusPhone). I was looking at the Android platform and find it quite fun to play with. However, one of the crucial elements of my BB that I love to death is the global inbox of all my email accounts. (not to mention the BB messenger, but I can live without that). Is there an addon or does the android have this feature natively? I played with my friend's Verizon Droid, and she couldn't tell me. Thanks!

    Read the article

  • Networking conflict - What is the most common default computer name?

    - by John
    I recently had to change the name of my computer to log onto a public wi-fi spot, because a computer with my name was already logged on. (I asked a guy there what to do after it said there was already a computer named "Dell(omitted)" logged on.) I've never been at a wifi spot that you had to log into before. I didn't even notice what the computer's name was before. My question is what are the most common default computer names. I'm curious. How often does this sort of problem happen? (I read via Google that Redhat linux default to "localhost" and Toshiba laptops default to "Toshiba.") Somebody probably keeps statistics. (I was referred here from serverfault.com) Thanks

    Read the article

  • Basic networking: Centos Server Router + Ubuntu Client setup.. unable to access outside world from client

    - by ale
    I am trying to set up my Centos Server with two NICs as a router. eth0 is connected to the outside world and eth1 is connected to an Ubuntu client. Here's eth0 on the server: DEVICE=eth0 BOOTPROTO=dhcp ONBOOT=yes TYPE=Ethernet eth1 on the server: DEVICE=eth1 BOOTPROTO=static IPADDR=192.168.0.10 # a free address on my network ONBOOT=yes TYPE=Ethernet My server has IPv4 packet forwarding turned on and my iptables only contains: # iptables --table nat --append POSTROUTING --out-interface eth0 -j MASQUERADE # iptables --append FORWARD --in-interface eth1 -j ACCEPT My Ubuntu client has this in its /etc/network/interfaces auto lo iface lo inet loopback iface eth0 inet dhcp gateway 192.168.0.10 but I can't get an Internet connection from the server for my client. I can't even ping my server from the client: $ ping 192.168.0.10 Destination Host Unreachable

    Read the article

  • Android software for the system administrator on the move

    - by GruffTech
    My company has over service through Verizon, and AT&T Service in the area is "shoddy" at its best, so I haven't been able to join the "iPhone party" like so many of my fellow system administrators have been able to. That being said, this week finally a phone I like has hit Verizon, the HTC Incredible. (I've been waiting for the Desire or Nexus One, but after seeing spec sheets and reviews, HTC Incredible comes out ahead anyway). So (finally) I'm looking for Android Apps that are "gotta-haves" for system administrators. I've found the bottom three. If there are others you prefer over these let me know. RDP Program - RemoteRDP SSH Client - ConnectBot Nagios - NagMonDroid Reply with your favorite Android App and why!

    Read the article

  • Running Android emulator inside a Virtualbox Vm

    - by sgargan
    I'm trying to setup a VM with a complete android development stack (SDK, Platforms, Eclipse etc) for a Hackathon. I'm having real trouble getting the emulator to start in the VM. I realize that the emulator is essentially a VM itself inside the Vbox VM and so is going to be slow, but it just hangs at the Android splash screen and never gets any further. Might there be something going on with the VM that is causing it to run so very slowly? Is there anything I can do to give the VM more CPU? I've tried setting the execution cap to 100% but it didn't help any. Anyone know what might be going on here, or have any ideas about how I might speed it up? Thanks Steve.

    Read the article

  • HTC Android Messages - adding contact from SMS

    - by Chris
    I'm not sure if this problem is specific to Android, HTC or Sense UI; apologies! Phone: T-Mobile G2 aka HTC Hero OS: Android 1.5 App: Messages Scenario: I receive a text from someone not in my Contacts, so just have their number. I want to add them as a new contact. Problem: I can't (click on the number and I can call them; long press on the message and I can add to an exist contact). Is there any way I can add a new contact simply?

    Read the article

  • 2D animations for Android, IOS, web

    - by David Phillips
    Working on Windows 7 platform, I'm interested in creating an app that could run on Android devices (phone or tablet), IOS devices (iPhone, iPad), and the web. First target would be Android. Do you remember those old Arthur Murray footstep diagrams to teach dancing? I want to do the same thing, but animate the steps, so the user can play them all, as well as step forward or backward thru them at their own pace. Perhaps one could generate an animated GIF and then play it on the platform. So there would seem to be two parts to this: 1) A good way to generate the animation images. I can, for example, see using SketchUp - something I know - for this. But is there something better it would be worth investing in? And, 2) How to play the result, including options for playback speed control, and even forward/backward stepping? Ideally a single, or easily adaptable player to the three different OS platforms.

    Read the article

< Previous Page | 101 102 103 104 105 106 107 108 109 110 111 112  | Next Page >