Search Results

Search found 53962 results on 2159 pages for 'error detection'.

Page 1055/2159 | < Previous Page | 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062  | Next Page >

  • At what point does "constructive" criticism of your code become unhelpful?

    - by user15859
    I recently started as a junior developer. As well as being one of the least experienced people on the team, I'm also a woman, which comes with all sorts of its own challenges working in a male-dominated environment. I've been having problems lately because I feel like I am getting too much unwarranted pedantic criticism on my work. Let me give you an example of what happened recently. Team lead was too busy to push in some branches I made, so he didn't get to them until the weekend. I checked my mail, not really meaning to do any work, and found that my two branches had been rejected on the basis of variable names, making error messages more descriptive, and moving some values to the config file. I don't feel that rejecting my branch on this basis is useful. Lots of people were working over the weekend, and I had never said that I would be working. Effectively, some people were probably blocked because I didn't have time to make the changes and resubmit. We are working on a project that is very time-sensitive, and it seems to me that it's not helpful to outright reject code based on things that are transparent to the client. I may be wrong, but it seems like these kinds of things should be handled in patch type commits when I have time. Now, I can see that in some environments, this would be the norm. However, the criticism doesn't seem equally distributed, which is what leads to my next problem. The basis of most of these problems was due to the fact that I was in a codebase that someone else had written and was trying to be minimally invasive. I was mimicking the variable names used elsewhere in the file. When I stated this, I was bluntly told, "Don't mimic others, just do what's right." This is perhaps the least useful thing I could have been told. If the code that is already checked in is unacceptable, how am I supposed to tell what is right and what is wrong? If the basis of the confusion was coming from the underlying code, I don't think it's my responsibility to spend hours refactoring a whole file that someone else wrote (and works perfectly well), potentially introducing new bugs etc. I'm feeling really singled out and frustrated in this situation. I've gotten a lot better about following the standards that are expected, and I feel frustrated that, for example, when I refactor a piece of code to ADD error checking that was previously missing, I'm only told that I didn't make the errors verbose enough (and the branch was rejected on this basis). What if I had never added it to begin with? How did it get into the code to begin with if it was so wrong? This is why I feel so singled out: I constantly run into this existing problematic code, that I either mimic or refactor. When I mimic it, it's "wrong", and if I refactor it, I'm chided for not doing enough (and if I go all the way, introducing bugs, etc). Again, if this is such a problem, I don't understand how any code gets into the codebase, and why it becomes my responsibility when it was written by someone else, who apparently didn't have their code reviewed. Anyway, how do I deal with this? Please remember that I said at the top that I'm a woman, and I'm sure these guys don't usually have to worry about decorum when they're reviewing other guys' code, but honestly that doesn't work for me, and it's causing me to be less productive. I'm worried that if I talk to my manager about it, he'll think I can't handled the environment, etc.

    Read the article

  • MySQL Server 5.6 defaults changes

    - by user12626240
    We're improving the MySQL Server defaults, as announced by Tomas Ulin at MySQL Connect. Here's what we're changing:  Setting  Old  New  Notes back_log  50  50 + ( max_connections / 5 ) capped at 900 binlog_checksum  off  CRC32  New variable in 5.6 binlog_row_event_max_size  1k  8k flush_time  1800  Windows changes from 1800 to 0  Was already 0 on other platforms host_cache_size  128  128 + 1 for each of the first 500 max_connections + 1 for every 20 max_connections over 500, capped at 2000  New variable in 5.6 innodb_autoextend_increment  8  64  Now affects *.ibd files. 64 is 64 megabytes innodb_buffer_pool_instances  0  8. On 32 bit Windows only, if innodb_buffer_pool_size is greater than 1300M, default is innodb_buffer_pool_size / 128M innodb_concurrency_tickets  500  5000 innodb_file_per_table  off  on innodb_log_file_size  5M  48M  InnoDB will always change size to match my.cnf value. Also see innodb_log_compressed_pages and binlog_row_image innodb_old_blocks_time 0  1000 1 second innodb_open_files  300  300; if innodb_file_per_table is ON, higher of table_open_cache or 300 innodb_purge_batch_size  20  300 innodb_purge_threads  0  1 innodb_stats_on_metadata  on  off join_buffer_size 128k  256k max_allowed_packet  1M  4M max_connect_errors  10  100 open_files_limit  0  5000  See note 1 query_cache_size  0  1M query_cache_type  on/1  off/0 sort_buffer_size  2M  256k sql_mode  none  NO_ENGINE_SUBSTITUTION  See later post about default my.cnf for STRICT_TRANS_TABLES sync_master_info  0  10000  Recommend: master_info_repository=table sync_relay_log  0  10000 sync_relay_log_info  0  10000  Recommend: relay_log_info_repository=table. Also see Replication Relay and Status Logs table_definition_cache  400  400 + table_open_cache / 2, capped at 2000 table_open_cache  400  2000   Also see table_open_cache_instances thread_cache_size  0  8 + max_connections/100, capped at 100 Note 1: In 5.5 there was already a rule to make open_files_limit 10 + max_connections + table_cache_size * 2 if that was higher than the user-specified value. Now uses the higher of that and (5000 or what you specify). We are also adding a new default my.cnf file and guided instructions on the key settings to adjust. More on this in a later post. We're also providing a page with suggestions for settings to improve backwards compatibility. The old example files like my-huge.cnf are obsolete. Some of the improvements are present from 5.6.6 and the rest are coming. These are ideas, and until they are in an official GA release, they are subject to change. As part of this work I reviewed every old server setting plus many hundreds of emails of feedback and testing results from inside and outside Oracle's MySQL Support team and the many excellent blog entries and comments from others over the years, including from many MySQL Gurus out there, like Baron, Sheeri, Ronald, Schlomi, Giuseppe and Mark Callaghan. With these changes we're trying to make it easier to set up the server by adjusting only a few settings that will cause others to be set. This happens only at server startup and only applies to variables where you haven't set a value. You'll see a similar approach used for the Performance Schema. The Gurus don't need this but for many newcomers the defaults will be very useful. Possibly the most unusual change is the way we vary the setting for innodb_buffer_pool_instances for 32-bit Windows. This is because we've found that DLLs with specified load addresses often fragment the limited four gigabyte 32-bit address space and make it impossible to allocate more than about 1300 megabytes of contiguous address space for the InnoDB buffer pool. The smaller requests for many pools are more likely to succeed. If you change the value of innodb_log_file_size in my.cnf you will see a message like this in the error log file at the next restart, instead of the old error message: [Warning] InnoDB: Resizing redo log from 2*64 to 5*128 pages, LSN=5735153 One of the biggest challenges for the defaults is the millions of installations on a huge range of systems, from point of sale terminals and routers though shared hosting or end user systems and on to major servers with lots of CPU cores, hundreds of gigabytes of RAM and terabytes of fast disk space. Our past defaults were for the smaller systems and these change that to larger shared hosting or shared end user systems, still with a bias towards the smaller end. There is a bias in favour of OLTP workloads, so reporting systems may need more changes. Where there is a conflict between the best settings for benchmarks and normal use, we've favoured production, not benchmarks. We're very interested in your feedback, comments and suggestions.

    Read the article

  • Oracle Applications Cloud Release 8 Customization: Your User Interface, Your Text

    - by ultan o'broin
    Introducing the User Interface Text Editor In Oracle Applications Cloud Release 8, there’s an addition to the customization tool set, called the User Interface Text Editor  (UITE). When signed in with an application administrator role, users launch this new editing feature from the Navigator's Tools > Customization > User Interface Text menu option. See how the editor is in there with other customization tools? User Interface Text Editor is launched from the Navigator Customization menu Applications customers need a way to make changes to the text that appears in the UI, without having to initiate an IT project. Business users can now easily change labels on fields, for example. Using a composer and activated sandbox, these users can take advantage of the Oracle Metadata Services (MDS), add a key to a text resource bundle, and then type in their preferred label and its description (as a best practice for further work, I’d recommend always completing that description). Changing a simplified UI field label using Oracle Composer In Release 8, the UITE enables business users to easily change UI text on a much wider basis. As with composers, the UITE requires an activated sandbox where users can make their changes safely, before committing them for others to see. The UITE is used for editing UI text that comes from Oracle ADF resource bundles or from the Message Dictionary (or FND_MESSAGE_% tables, if you’re old enough to remember such things). Functionally, the Message Dictionary is used for the text that appears in business rule-type error, warning or information messages, or as a text source when ADF resource bundles cannot be used. In the UITE, these Message Dictionary texts are referred to as Multi-part Validation Messages.   If the text comes from ADF resource bundles, then it’s categorized as User Interface Text in the UITE. This category refers to the text that appears in embedded help in the UI or in simple error, warning, confirmation, or information messages. The embedded help types used in the application are explained in an Oracle Fusion Applications User Experience (UX) design pattern set. The message types have a UX design pattern set too. Using UITE  The UITE enables users to search and replace text in UI strings using case sensitive options, as well as by type. Users select singular and plural options for text changes, should they apply. Searching and replacing text in the UITE The UITE also provides users with a way to preview and manage changes on an exclusion basis, before committing to the final result. There might, for example, be situations where a phrase or word needs to remain different from how it’s generally used in the application, depending on the context. Previewing replacement text changes. Changes can be excluded where required. Multi-Part Messages The Message Dictionary table architecture has been inherited from Oracle E-Business Suite days. However, there are important differences in the Oracle Applications Cloud version, notably the additional message text components, as explained in the UX Design Patterns. Message Dictionary text has a broad range of uses as indicated, and it can also be reserved for internal application use, for use by PL/SQL and C programs, and so on. Message Dictionary text may even concatenate together at run time, where required. The UITE handles the flexibility of such text architecture by enabling users to drill down on each message and see how it’s constructed in total. That way, users can ensure that any text changes being made are consistent throughout the different message parts. Multi-part (Message Dictionary) message components in the UITE Message Dictionary messages may also use supportability-related numbers, the ones that appear appended to the message text in the application’s UI. However, should you have the requirement to remove these numbers from users' view, the UITE is not the tool for the job. Instead, see my blog about using the Manage Messages UI.

    Read the article

  • Free hosting solution for a very low-traffic website [duplicate]

    - by user966939
    This question already has an answer here: How to find web hosting that meets my requirements? 4 answers I run a very low-traffic website (about 40 users, basically all of which are daily active on the site). I don't see it changing anytime soon either, as there is no way to sign up on the site right now. Until now I have just been using a sub-directory on a friend's host (shared), to host the web site. But in only a few weeks from now, his subscription will end, and he has no plans on renewing it. So of course this means I'll have to move on to something else. But I don't think I'll find someone who'd be willing to share a... shared host with me again. And besides, the software used on that server is ancient (PHP 4.4.9 + MySQL 4.1.22). There's one obvious solution that comes to mind, I guess: choose a better host and pay for it myself. The problem here is that I have no real fixed income, as I'm only a student. So even if the pricing is dirt cheap, I just can't be certain I will be able to afford it, every single month, for... at least 2 years maybe? So I've looked at free hosting solutions instead. The least requirement I had was that it was completely free of ads. But no matter where I look, I always find something in a corner or two ("what can you expect from a free host?" - yeah I know, but I guess it was worth a shot). For example, on Byethost (one of the free hosts I tried), if you trigger a PHP error while error reporting is set to E_ALL, you will spawn some hidden ad... Besides Byethost, I've tried 000Webhost, x10Hosting, 2Freehosting/1Freehosting, Wink.ws, and they are only worse. Okay, I'm running low on ideas. But! What if I just hosted the site myself, on my own computer? That could work. I actually do have my computer on practically 24/7. But not really. Sometimes I need to reboot it, and sometimes we even have power outages. And what if the hardware needs an upgrade? It's not such a big deal for me if the site went down, because I know what's going on; but what about the users? If I do decide to host it myself, is there some way to show users an alternate page instead of them just seeing a generic "server not found" page in the browser when the site is not accessible? Or is there something I have been missing out on? Is there a different kind of "web hosting" solution out there that I haven't heard of? Here is what I'm really looking for: Free (as in, no costs) NO ads Bandwidth enough for a low-traffic forum with roughly 40 users (Semi-)Up-to-date PHP and MySQL (at least not older than a year) No standard (non-extension) PHP functions turned off - such as sleep() The mbstring extension is enabled Disk space: at least 5 MB At least one MySQL database Some bonus points would be: Max execution time of PHP scripts can be set Remote access to MySQL database What would be the best solution for me? Is there one?

    Read the article

  • Login via XDMCP not possible to 12.04 from Squeeze box

    - by Joysn
    Can anybody tell me whats wrong with my 12.04/lightdm/XDMCP setup? i activated X11 remote via tcp and XDMCP on lightdm and restarted lightdm: [SeatDefaults] user-session=ubuntu greeter-session=unity-greeter xserver-allow-tcp=true [XDMCPServer] enabled=true whenever i try to login to the remove lightdm via Xephyr Xephyr -query <remote ip> :10 i get the following trace: SELinux: Disabled on system, not enabling in X server [dix] Could not init font path element /usr/share/fonts/X11/cyrillic, removing from list! Ignoring device from udev. Ignoring device from udev. Ignoring device from udev. Ignoring device from udev. Ignoring device from udev. Ignoring device from udev. *** glibc detected *** Xephyr: free(): corrupted unsorted chunks: 0x08659088 *** ======= Backtrace: ========= /lib/i686/cmov/libc.so.6(+0x6af71)[0xb72b6f71] /lib/i686/cmov/libc.so.6(+0x6c7c8)[0xb72b87c8] /lib/i686/cmov/libc.so.6(cfree+0x6d)[0xb72bb8ad] Xephyr(Xfree+0x21)[0x81ddcd1] Xephyr(SrvXkbResizeKeyType+0x59e)[0x81ca01e] Xephyr[0x81ab8eb] Xephyr[0x81ac8c2] Xephyr[0x8088807] Xephyr[0x807c16a] /lib/i686/cmov/libc.so.6(__libc_start_main+0xe6)[0xb7262ca6] Xephyr[0x8061081] ======= Memory map: ======== 08048000-08204000 r-xp 00000000 fd:00 1148994 /usr/bin/Xephyr 08204000-08210000 rw-p 001bc000 fd:00 1148994 /usr/bin/Xephyr 08210000-08239000 rw-p 00000000 00:00 0 08496000-087ac000 rw-p 00000000 00:00 0 [heap] b5600000-b5621000 rw-p 00000000 00:00 0 b5621000-b5700000 ---p 00000000 00:00 0 b5762000-b588f000 rw-p 00000000 00:00 0 b588f000-b58b3000 r-xp 00000000 fd:00 50040 /usr/lib/libexpat.so.1.5.2 b58b3000-b58b5000 rw-p 00024000 fd:00 50040 /usr/lib/libexpat.so.1.5.2 b58d0000-b5ae4000 r-xp 00000000 fd:00 1212530 /usr/lib/dri/swrast_dri.so b5ae4000-b5ae9000 rw-p 00214000 fd:00 1212530 /usr/lib/dri/swrast_dri.so b5ae9000-b5af8000 rw-p 00000000 00:00 0 b5af8000-b5c24000 rw-s 00000000 00:04 1420132375 /SYSV00000000 (deleted) b5c24000-b5c28000 r-xp 00000000 fd:00 770089 /usr/lib/libXfixes.so.3.1.0 b5c28000-b5c29000 rw-p 00003000 fd:00 770089 /usr/lib/libXfixes.so.3.1.0 b5c29000-b5c31000 r-xp 00000000 fd:00 772923 /usr/lib/libXrender.so.1.3.0 b5c31000-b5c32000 rw-p 00007000 fd:00 772923 /usr/lib/libXrender.so.1.3.0 b5c32000-b5c3a000 r-xp 00000000 fd:00 49913 /usr/lib/libXcursor.so.1.0.2 b5c3a000-b5c3b000 rw-p 00007000 fd:00 49913 /usr/lib/libXcursor.so.1.0.2 b5c3b000-b5c58000 r-xp 00000000 09:02 466930 /lib/libgcc_s.so.1 b5c58000-b5c59000 rw-p 0001c000 09:02 466930 /lib/libgcc_s.so.1 b5c59000-b5c5b000 rw-p 00000000 00:00 0 b5c5b000-b7121000 r-xp 00000000 fd:00 49164 /usr/lib/libnvidia-glcore.so.256.53 b7121000-b7178000 rwxp 014c6000 fd:00 49164 /usr/lib/libnvidia-glcore.so.256.53 b7178000-b7188000 rwxp 00000000 00:00 0 b7188000-b7189000 r-xp 00000000 fd:00 49193 /usr/lib/tls/libnvidia-tls.so.256.53 b7189000-b718a000 rw-p 00000000 fd:00 49193 /usr/lib/tls/libnvidia-tls.so.256.53 b718a000-b718b000 rw-p 00000000 00:00 0 b718b000-b7190000 r-xp 00000000 fd:00 50172 /usr/lib/libfontenc.so.1.0.0 b7190000-b7191000 rw-p 00005000 fd:00 50172 /usr/lib/libfontenc.so.1.0.0 b7191000-b71a1000 r-xp 00000000 09:02 466849 /lib/libbz2.so.1.0.4 b71a1000-b71a2000 rw-p 00010000 09:02 466849 /lib/libbz2.so.1.0.4 b71a2000-b71b5000 r-xp 00000000 fd:00 52002 /usr/lib/libz.so.1.2.3.4 b71b5000-b71b6000 rw-p 00013000 fd:00 52002 /usr/lib/libz.so.1.2.3.4 b71b6000-b722a000 r-xp 00000000 fd:00 51162 /usr/lib/libfreetype.so.6.6.0 b722a000-b722e000 rw-p 00073000 fd:00 51162 /usr/lib/libfreetype.so.6.6.0 b722e000-b7246000 r-xp 00000000 fd:00 49652 /usr/lib/libxcb.so.1.1.0 b7246000-b7247000 rw-p 00017000 fd:00 49652 /usr/lib/libxcb.so.1.1.0 b7247000-b7248000 rw-p 00000000 00:00 0 b7248000-b724b000 r-xp 00000000 fd:00 54148 /usr/lib/libgpg-error.so.0.4.0 b724b000-b724c000 rw-p 00002000 fd:00 54148 /usr/lib/libgpg-error.so.0.4.0 b724c000-b738c000 r-xp 00000000 09:02 467095 /lib/i686/cmov/libc-2.11.3.so

    Read the article

  • Monitoring Windows Azure Service Bus Endpoint with BizTalk 360?

    - by Michael Stephenson
    I'm currently working with a customer who is undergoing an initiative to expose some of their line of business applications to external partners and SAAS applications and as part of this we have been looking at using the Windows Azure Service Bus. For the first part of the project we were focused on some synchronous request response scenarios where an external application would use the Service Bus relay functionality to get data from some internal applications. When we were looking at the operational monitoring side of the solution it was obvious that although most of the normal server monitoring capabilities would be required for the on premise components we would have to look at new approaches to validate that the operation of the service from outside of the organization was working as expected. A number of months ago one of my colleagues Elton Stoneman wrote about an approach I have introduced with a number of clients in the past where we implement a diagnostics service in each service component we build. This service would allow us to make a call which would flex some of the working parts of the system to prove it was working within any SLA. This approach is discussed on the following article: http://geekswithblogs.net/EltonStoneman/archive/2011/12/12/the-value-of-a-diagnostics-service.aspx In our solution we wanted to take the same approach but we had to consider that the service clients were external to the service. We also had to consider that by going through Windows Azure Service Bus it's not that easy to make most of your standard monitoring solutions just give you an easy way to do this. In a previous article I have described how you can use BizTalk 360 to monitor things using a custom extension to the Web Endpoint Manager and I felt that we could use this approach to provide an excellent way to monitor our service bus endpoint. The previous article is available on the following link: http://geekswithblogs.net/michaelstephenson/archive/2012/09/12/150696.aspx   The Monitoring Solution BizTalk 360 currently has an easy way to hook up the endpoint manager to a url which it will then call and if a successful response is returned it then considers the endpoint to be in a healthy state. We would take advantage of this by creating an ASP.net web page which would be called by BizTalk 360 and behind this page we would implement the functionality to call the diagnostics service on our Service Bus endpoint. The ASP.net page could include logic to work out how to handle the response from the diagnostics service. For example if the overall result of the diagnostics service was successful but the call to the diagnostics service was longer than a certain amount of time then we could return an error and indicate the service is taking too long. The following diagram illustrates the monitoring pattern.   The diagnostics service which is hosted in the line of business application allows us to ping a simple message through the Azure Service Bus relay to the WCF services in the LOB application and we they get a response back indicating that the service is working fine. To implement this I used the exact same approach I described in my previous post to create a custom web page which calls the diagnostics service and then it would return an HTTP response code which would depend on the error condition returned or a 200 if it was successful. One of the limitations of this approach is that the competing consumer pattern for listening to messages from service bus means that you cannot guarantee which server would process your diagnostics check message but with BizTalk 360 you could simply add multiple endpoint checks so that it could access the individual on-premise web servers directly to ensure that each server is working fine and then check that messages can also be processed through the cloud. Conclusion It took me about 15 minutes to get a proof of concept of this up and running which was able to monitor our web services which had been exposed via Windows Azure Service Bus. I was then able to inherit all of the monitoring benefits of BizTalk 360 to provide an enterprise class monitoring solution for our cloud enabled API.

    Read the article

  • MySQL Enterprise Backup 3.8.2 has been released!

    - by Hema Sridharan
    MySQL Enterprise Backup v3.8.2, a maintenance release of online MySQL backup tool, is now available for download from My Oracle Support  (MOS) website as our latest GA release.  It will also be available via the Oracle Software Delivery Cloud in approximately 1-2 weeks. A brief summary of the changes in MySQL Enterprise Backup version 3.8.2 is given below.   A. Functionality Added or Changed:  MySQL Enterprise Backup has a new --on-disk-full command line option. mysqlbackup could hang when the disk became full, rather than detecting the low space condition. mysqlbackup now monitors disk space when running backup commands, and users can now specify the action to take at a disk-full condition with the --on-disk-full option. For more details, refer this page MySQL Enterprise Backup has a new progress report feature, which periodically outputs short progress indicators on its  operations to user-selected destinations (for example, stdout, stderr, a file, or other choices). For more details on progress report options, refer here   B. Bugs Fixed: When --innodb-file-per-table=ON, if a table was renamed and backup-to-image was in progress, apply-log would fail when being run on the backup. (Bug #16903973)   MySQL Server failed to start after a backup was restored if  there had been online DDL transactions on partitioned tables during the time of backup. (Bug #16924499)   apply-log failed if ALTER TABLE ... REORGANIZE PARTITION was applied to partitioned InnoDB tables during backup. (Bug #16721824, Bug #16903951)  apply-incremental-backup might fail with an assertion error if  the InnoDB tables being backed up were created in Barracuda format and with their KEY_BLOCK_SIZE  values  different from the innodb_page_size . This fix ensures that different KEY_BLOCK_SIZE  values are handled properly during incremental backup and apply-incremental-backup operations.  If a table was renamed following a full backup, a subsequent incremental backup could copy the .frm file with the new name, but not the associated .ibd file with the new name. After a  restore, the InnoDB data dictionary could be in an  inconsistent state. This issue primarily occurred if the table  was not changed between the full backup and the subsequent  incremental backup. Bug #16262690)  After a full backup, if a table was renamed and modified,  apply-incremental-backup would crash when run on the backup directory. (Bug #16262609) The value of the binary log position in backup_variables.txt  could be different from the output displayed during the   backup-and-apply-log operation. (This issue did not occur if  the backup and apply-log steps were done separately.) (Bug  #16195529) When using the --only-innodb-with-frm option, MySQL Enterprise Backup tried to create temporary files at unintended locations in the file system, which might cause a failure when, for example, the user had no write privilege for those locations.   This fix makes sure the paths for the temporary files are  correct. (Bug #14787324)  A backup process might hang when it ran into an LSN mismatch between a data file  and the redo log. This fix makes sure the process does not hang and it displays an error message showing the  name of the problematic data file (Bug #14791645) Please post your questions / comments about Backup in forums. Thanks, MEB Team

    Read the article

  • Using NSpec at various architectural layers

    - by nono
    Having read the quick start at nspec.org, I realized that NSpec might be a useful tool in a scenario which was becoming a bit cumbersome with NUnit alone. I'm adding an OAuth (or, DotNetOpenAuth) to a website and quickly made a mess of writing test methods such as [Test] public void UserIsLoggedInLocallyPriorToInvokingExternalLoginAndExternalLoginSucceedsAndExternalProviderIdIsNotAlreadyAssociatedWithUserAccount() { ... } ... and I wound up with maybe a dozen permutations of this theme, for the user already being logged in locally and not locally, the external login succeeding or failing, etc. Not only were the method names unwieldy, but every test needed a setup that contained parts in common with a different set of other tests. I realized that NSpec's incremental setup capabilities would work great for this, and for a while I was trucking a long wonderfully, with code like act = () => { actionResult = controller.ExternalLoginCallback(returnUrl); }; context["The user is already logged in"] = () => { before = () => identity.Setup(x => x.IsAuthenticated).Returns(true); context["The external login succeeds"] = () => { before = () => oauth.Setup(x => x.VerifyAuthentication(It.IsAny<string>())).Returns(new AuthenticationResult(true, providerName, "provideruserid", "username", new Dictionary<string, string>())); context["External login already exists for current user"] = () => { before = () => authService.Setup(x => x.ExternalLoginExistsForUser(It.IsAny<string>(), It.IsAny<string>(), It.IsAny<string>())).Returns(true); it["Should add 'login sucessful' alert"] = () => { var alerts = (IList<Alert>)controller.TempData[TempDataKeys.AlertCollection]; alerts[0].Message.should_be_same("Login successful"); alerts[0].AlertType.should_be(AlertType.Success); }; it["Should return a redirect result"] = () => actionResult.should_cast_to<RedirectToRouteResult>(); }; context["External login already exists for another user"] = () => { before = () => authService.Setup(x => x.ExternalLoginExistsForAnyOtherUser(It.IsAny<string>(), It.IsAny<string>(), It.IsAny<string>())).Returns(true); it["Adds an error alert"] = () => { var alerts = (IList<Alert>)controller.TempData[TempDataKeys.AlertCollection]; alerts[0].Message.should_be_same("The external login you requested is already associated with a different user account"); alerts[0].AlertType.should_be(AlertType.Error); }; it["Should return a redirect result"] = () => actionResult.should_cast_to<RedirectToRouteResult>(); }; This approach seemed to work magnificently until I prepared to write test code for my ApplicationServices layer, to which I delegate viewmodel manipulation from my MVC controllers, and which coordinates the operations of the lower data repository layer: public void CreateUserAccountFromExternalLogin(RegisterExternalLoginModel model) { throw new NotImplementedException(); } public void AssociateExternalLoginWithUser(string userName, string provider, string providerUserId) { throw new NotImplementedException(); } public string GetLocalUserName(string provider, string providerUserId) { throw new NotImplementedException(); } I have no idea what in the world to name the test class, the test methods, or even if I should perhaps include the testing for this layer into the test class from my large code snippet above, so that a single feature or user action could be tested without regard to architectural layering. I can't find any tutorials or blog posts which cover more than simple examples, so I would appreciate any recommendations or pointing in the right direction. I would even welcome "your question is invalid"-type answers as long as some explanation is provided.

    Read the article

  • Why does OpenGL seem to ignore my glBindTexture call?

    - by Killrazor
    I'm having problems making a simple sprite rendering. I load 2 different textures. Then, I bind these textures and draw 2 squares, one with each texture. But only the texture of the first rendered object is drawn in both squares. Its like if I'd only use a texture or as if glBindTexture don't work properly. I know that GL is a state machine, but I think that you only need to change active texture with glBindTexture. I load texture with this method: bool CTexture::generate( utils::CImageBuff* img ) { assert(img); m_image = img; CHECKGL(glGenTextures(1,&m_textureID)); CHECKGL(glBindTexture(GL_TEXTURE_2D,m_textureID)); CHECKGL(glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_MIN_FILTER,GL_LINEAR)); CHECKGL(glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_MAG_FILTER,GL_LINEAR)); //CHECKGL(glTexImage2D(GL_TEXTURE_2D,0,img->getBpp(),img->getWitdh(),img->getHeight(),0,img->getFormat(),GL_UNSIGNED_BYTE,img->getImgData())); CHECKGL(glTexImage2D(GL_TEXTURE_2D, 0, GL_RGBA, img->getWitdh(), img->getHeight(), 0, GL_RGBA, GL_UNSIGNED_BYTE, img->getImgData())); return true; } And I bind textures with this function: void CTexture::bind() { CHECKGL(glBindTexture(GL_TEXTURE_2D,m_textureID)); } Also, I draw sprites with this method void CSprite2D::render() { CHECKGL(glLoadIdentity()); CHECKGL(glEnable(GL_TEXTURE_2D)); CHECKGL(glEnable(GL_BLEND)); CHECKGL(glBlendFunc(GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA)); m_texture->bind(); CHECKGL(glPushMatrix()); CHECKGL(glBegin(GL_QUADS)); CHECKGL(glTexCoord2f(m_textureAreaStart.s,m_textureAreaStart.t)); // 0,0 by default CHECKGL(glVertex3i(m_position.x,m_position.y,0)); CHECKGL(glTexCoord2f(m_textureAreaEnd.s,m_textureAreaStart.t)); // 1,0 by default CHECKGL(glVertex3i( m_position.x + m_dimensions.x, m_position.y, 0)); CHECKGL(glTexCoord2f(m_textureAreaEnd.s, m_textureAreaEnd.t)); // 1,1 by default CHECKGL(glVertex3i( m_position.x + m_dimensions.x, m_position.y + m_dimensions.y, 0)); CHECKGL(glTexCoord2f(m_textureAreaStart.s, m_textureAreaEnd.t)); // 0,1 by default CHECKGL(glVertex3i( m_position.x, m_position.y + m_dimensions.y,0)); CHECKGL(glPopMatrix()); CHECKGL(glDisable(GL_BLEND)); } Edit: I bring also the check error code: int CheckGLError(const char *GLcall, const char *file, int line) { GLenum errCode; //avoids infinite loop int errorCount = 0; while ( (errCode=glGetError()) != GL_NO_ERROR && ++errorCount < 3000) { utils::globalLogPtr log = utils::CGLogFactory::getLogInstance(); const GLubyte *errString; errString = gluErrorString(errCode); std::stringstream ss; ss << "In "<< __FILE__<<"("<< __LINE__<<") "<<"GL error with code: " << errCode<<" at file " << file << ", line " << line << " with message: " << errString << "\n"; log->addMessage(ss.str(),ZEL_APPENDER_GL,utils::LOGLEVEL_ERROR); } return 0; }

    Read the article

  • ADF page security - the untold password rule

    - by ankuchak
    I'm kinda new to Oracle ADF. So, in this blog post I'm going to share something with you that I faced (and recovered from) recently. Initially I thought if I should at all put a blog post on this, because it's totally simple. Still, simplicity is a relative term. So without wasting further time, let's kick off.    I was exploring the ADF security aspect to secure a page through html basic authentication. The idea is very simple and the credential store etc. come into picture. But I was not able to run a successful test of this phenomenally simple thing even after trying for over 30 minutes. This is what I did.   I created a simple jsf page and put a panel in it. And I put a simple el to show the current user name.  Next I created a user that I should test with. I named the password as myuser, just to keep it simple. Then I created an enterprise role and mapped the user that I just created. Then I created an application role and mapped the enterprise role to it. Then I mapped the resource, the simple jsf page in this case, to this application role. This way, only users with the given application role can only access this page (as if you didn't know this duh!).  Of course, I had to create the page definition for the page before I could map it to an application role. What else! done! Then I hit the run menu item and it all went well...   Until... I got this message. I put the correct credentials repeatedly 2-3 times. Still I got the same error. Why? I didn't get any error message during the deployment. nope.  Then, as I said before, I spent over 30 minutes trying different things out, things like mapping only the user(not the role) to the page, changing the context root etc. Nothing worked!  Then of course, I bothered to look at the logs and found this. See the first red line. That says it all. So the problem was with that password. The password must have at least one special character and one digit in it. I think I was misled by the missing password hint/rule and the fact that the deployment didn't fail even if the user was not created properly. Well, yes, I agree that I was fool enough not to look at the logs.  Later I changed the password to something like myuser123# . And it worked. I hope it helped.

    Read the article

  • Best way to load application settings

    - by enzom83
    A simple way to keep the settings of a Java application is represented by a text file with ".properties" extension containing the identifier of each setting associated with a specific value (this value may be a number, string, date, etc..). C# uses a similar approach, but the text file must be named "App.config". In both cases, in source code you must initialize a specific class for reading settings: this class has a method that returns the value (as string) associated with the specified setting identifier. // Java example Properties config = new Properties(); config.load(...); String valueStr = config.getProperty("listening-port"); // ... // C# example NameValueCollection setting = ConfigurationManager.AppSettings; string valueStr = setting["listening-port"]; // ... In both cases we should parse strings loaded from the configuration file and assign the ??converted values to the related typed objects (parsing errors could occur during this phase). After the parsing step, we must check that the setting values ??belong to a specific domain of validity: for example, the maximum size of a queue should be a positive value, some values ??may be related (example: min < max), and so on. Suppose that the application should load the settings as soon as it starts: in other words, the first operation performed by the application is to load the settings. Any invalid values for the settings ??must be replaced automatically with default values??: if this happens to a group of related settings, those settings are all set with default values. The easiest way to perform these operations is to create a method that first parses all the settings, then checks the loaded values ??and finally sets any default values??. However maintenance is difficult if you use this approach: as the number of settings increases while developing the application, it becomes increasingly difficult to update the code. In order to solve this problem, I had thought of using the Template Method pattern, as follows. public abstract class Setting { protected abstract bool TryParseValues(); protected abstract bool CheckValues(); public abstract void SetDefaultValues(); /// <summary> /// Template Method /// </summary> public bool TrySetValuesOrDefault() { if (!TryParseValues() || !CheckValues()) { // parsing error or domain error SetDefaultValues(); return false; } return true; } } public class RangeSetting : Setting { private string minStr, maxStr; private byte min, max; public RangeSetting(string minStr, maxStr) { this.minStr = minStr; this.maxStr = maxStr; } protected override bool TryParseValues() { return (byte.TryParse(minStr, out min) && byte.TryParse(maxStr, out max)); } protected override bool CheckValues() { return (0 < min && min < max); } public override void SetDefaultValues() { min = 5; max = 10; } } The problem is that in this way we need to create a new class for each setting, even for a single value. Are there other solutions to this kind of problem? In summary: Easy maintenance: for example, the addition of one or more parameters. Extensibility: a first version of the application could read a single configuration file, but later versions may give the possibility of a multi-user setup (admin sets up a basic configuration, users can set only certain settings, etc..). Object oriented design.

    Read the article

  • android client not working [migrated]

    - by Syeda Zunairah
    i have a java client and c# server the server code is static Socket listeningSocket; static Socket socket; static Thread thrReadRequest; static int iPort = 4444; static int iConnectionQueue = 100; static void Main(string[] args) { Console.WriteLine(IPAddress.Parse(getLocalIPAddress()).ToString()); try { listeningSocket = new Socket(AddressFamily.InterNetwork, SocketType.Stream, ProtocolType.Tcp); //listeningSocket.Bind(new IPEndPoint(0, iPort)); listeningSocket.Bind(new IPEndPoint(IPAddress.Parse(getLocalIPAddress()), iPort)); listeningSocket.Listen(iConnectionQueue); thrReadRequest = new Thread(new ThreadStart(getRequest)); thrReadRequest.Start(); } catch (Exception e) { Console.WriteLine("Winsock error: " + e.ToString()); //throw; } } static private void getRequest() { int i = 0; while (true) { i++; Console.WriteLine("Outside Try i = {0}", i.ToString()); try { socket = listeningSocket.Accept(); // Receiving //byte[] rcvLenBytes = new byte[4]; //socket.Receive(rcvLenBytes); //int rcvLen = System.BitConverter.ToInt32(rcvLenBytes, 0); //byte[] rcvBytes = new byte[rcvLen]; //socket.Receive(rcvBytes); //String formattedBuffer = System.Text.Encoding.ASCII.GetString(rcvBytes); byte[] buffer = new byte[socket.SendBufferSize]; int iBufferLength = socket.Receive(buffer, 0, buffer.Length, 0); Console.WriteLine("Received {0}", iBufferLength); Array.Resize(ref buffer, iBufferLength); string formattedBuffer = Encoding.ASCII.GetString(buffer); Console.WriteLine("Data received by Client: {0}", formattedBuffer); if (formattedBuffer == "quit") { socket.Close(); listeningSocket.Close(); Environment.Exit(0); } Console.WriteLine("Inside Try i = {0}", i.ToString()); Thread.Sleep(500); } catch (Exception e) { //socket.Close(); Console.WriteLine("Receiving error: " + e.ToString()); Console.ReadKey(); //throw; } finally { socket.Close(); //listeningsocket.close(); } } } static private string getLocalIPAddress() { IPHostEntry host; string localIP = ""; host = Dns.GetHostEntry(Dns.GetHostName()); foreach (IPAddress ip in host.AddressList) { if (ip.AddressFamily == AddressFamily.InterNetwork) { localIP = ip.ToString(); break; } } return localIP; } } and the jave android code is private TCPClient mTcpClient; @Override protected void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.activity_main); final EditText editText = (EditText) findViewById(R.id.edit_message); Button send = (Button)findViewById(R.id.sendbutton); // connect to the server new connectTask().execute(""); send.setOnClickListener(new View.OnClickListener() { @Override public void onClick(View view) { String message = editText.getText().toString(); //sends the message to the server if (mTcpClient != null) { mTcpClient.sendMessage(message); } editText.setText(""); } }); } @Override public boolean onCreateOptionsMenu(Menu menu) { getMenuInflater().inflate(R.menu.main, menu); return true; } public class connectTask extends AsyncTask<String,String,TCPClient> { @Override protected TCPClient doInBackground(String... message) { mTcpClient = new TCPClient(new TCPClient.OnMessageReceived() { @Override public void messageReceived(String message) { publishProgress(message); } }); mTcpClient.run(); return null; } @Override protected void onProgressUpdate(String... values) { super.onProgressUpdate(values); } } } when i run the server it gives output of try i=1. can any one tell me what to do next

    Read the article

  • MSBuild (.NET 4.0) access problems

    - by JMP
    I'm using Cruise Control .NET as my build server (Windows 2008 Server). Yesterday I upgraded my ASP.NET MVC project from VS 2008/.NET 3.5 to VS 2010/.NET 4.0. The only change I made to my ccnet.config's MSBuild task was the location of MSBuild.exe. Ever since I made that change, the build has been broken with the error: MSB4019 - The imported project "C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v10.0\WebApplications\Microsoft.WebApplication.targets" was not found. Confirm that the path in the declaration is correct, and that the file exists on disk. This file does, in fact, exist in the location specified (I solved a problem similar to this when setting up the build server for VS2008/.NET 3.5 by copying the files from my dev environment to my build environment). So I RDP'ed into the build machine and opened a command prompt, used MSBUILD to attempt to build my project. MSBUILD returns the error: MSB3021 - Unable to copy file "obj\debug....dll". Access to the path 'bin....dll' is denied. Since I'm running MSBUILD from the command prompt, logged in with an account that has administrative privileges, I'm assuming that MSBUILD is running with the same privileges that I have. Next, I tried to copy the file that MSBUILD was attempting to copy. In this case, I get the UAC dialog that makes me click the [Continue] button to complete the copy. I'd like to avoid installing Visual Studio 2010 on my build machine, can anyone suggest other fixes I might try?

    Read the article

  • How can I get TFS2010 to run MSDEPLOY for me through MSBUILD?

    - by Simon_Weaver
    There is an excellent PDC talk available here which describes the new MSDEPLOY features in Visual Studio 2010 - as well as how to deploy an application within TFS. You can use MSBUILD within TFS2010 to call through to MSDEPLOY to deploy your package to IIS. This is done by means of parameters to MSBUILD. The talk explains some of the command line parameters such as : /p:DeployOnBuild /p:DeployTarget=MsDeployPublish /p:CreatePackageOnPublish=True /p:MSDeployPublishMethod=InProc /p:MSDeployServiceURL=localhost /p:DeployIISAppPath="Default Web Site" But where is the documentation for this - I can't find any? I've been spending all day trying to get this to work and can't quite get it right and keep ending up with various errors. If I run the package's cmd file it deploys perfectly. But I want to get the whole deployment running through msbuild using these arguments and not a separate call to msdeploy or running the package .cmd file. How can I do this? PS. Yes I do have the Web Deployment Agent Service running. I also have the management service running under IIS. I've tried using both. Args I'm using : /p:DeployOnBuild=True /p:DeployTarget=MsDeployPublish /p:Configuration=Release /p:CreatePackageOnPublish=True /p:DeployIisAppPath=staging.example.com /p:MsDeployServiceUrl=https://staging.example.com:8172/msdeploy.axd /p:AllowUntrustedCertificate=True giving me : C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v10.0\Web\Microsoft.Web.Publishing.targets (2660): VsMsdeploy failed.(Remote agent (URL https://staging.example.com:8172/msdeploy.axd?site=staging.example.com) could not be contacted. Make sure the remote agent service is installed and started on the target computer.) Error detail: Remote agent (URL https://staging.example.com:8172/msdeploy.axd?site=staging.example.com) could not be contacted. Make sure the remote agent service is installed and started on the target computer. An unsupported response was received. The response header 'MSDeploy.Response' was '' but 'v1' was expected. The remote server returned an error: (401) Unauthorized.

    Read the article

  • AWS S3 status code 403 SignatureDoesNotMatch - Check your key and signing method

    - by Matt
    i have checked a rechecked my keys and they are correct but i keep the below Exception whenever i try to upload, can anyone shed some light on this problem? 11-01 09:21:26.331: W/System.err(13934): AmazonS3Exception: Status Code: 403, AWS Service: Amazon S3, AWS Request ID: B97CC81E13D81XXX, AWS Error Code: SignatureDoesNotMatch, AWS Error Message: The request signature we calculated does not match the signature you provided. Check your key and signing method., S3 Extended Request ID: PPieuQpqElIizNBQPc42JwC4WnBkUciCKRT5S4HSftBraeacN8y0lKfsVP9LXXXX 11-01 09:21:26.331: W/System.err(13934): at com.amazonaws.http.AmazonHttpClient.handleErrorResponse(AmazonHttpClient.java:659) 11-01 09:21:26.331: W/System.err(13934): at com.amazonaws.http.AmazonHttpClient.executeHelper(AmazonHttpClient.java:330) 11-01 09:21:26.331: W/System.err(13934): at com.amazonaws.http.AmazonHttpClient.execute(AmazonHttpClient.java:182) 11-01 09:21:26.331: W/System.err(13934): at com.amazonaws.services.s3.AmazonS3Client.invoke(AmazonS3Client.java:3038) 11-01 09:21:26.331: W/System.err(13934): at com.amazonaws.services.s3.AmazonS3Client.putObject(AmazonS3Client.java:1218) 11-01 09:21:26.331: W/System.err(13934): at com.apprssd.capsule.S3UploaderActivity$S3PutObjectTask.doInBackground(S3UploaderActivity.java:165) 11-01 09:21:26.331: W/System.err(13934): at com.apprssd.capsule.S3UploaderActivity$S3PutObjectTask.doInBackground(S3UploaderActivity.java:1) 11-01 09:21:26.331: W/System.err(13934): at android.os.AsyncTask$2.call(AsyncTask.java:287) 11-01 09:21:26.331: W/System.err(13934): at java.util.concurrent.FutureTask.run(FutureTask.java:234) 11-01 09:21:26.341: W/System.err(13934): at android.os.AsyncTask$SerialExecutor$1.run(AsyncTask.java:230) 11-01 09:21:26.341: W/System.err(13934): at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1080) 11-01 09:21:26.341: W/System.err(13934): at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:573) 11-01 09:21:26.341: W/System.err(13934): at java.lang.Thread.run(Thread.java:841) It happens during the below. PutObjectRequest por = new PutObjectRequest( Constants.getDataBucket(), selectedZip.toString(), selectedZip); s3Client.putObject(por);

    Read the article

  • Exchange Web Service (EWS) call fails under ASP.NET but not a console application

    - by Vince Panuccio
    I'm getting an error when I attempt to connect to Exchange Web Services via ASP.NET. The following code works if I call it via a console application but the very same code fails when executed on a ASP.NET web forms page. Just as a side note, I am using my own credentials throughout this entire code sample. "When making a request as an account that does not have a mailbox, you must specify the mailbox primary SMTP address for any distinguished folder Ids." I thought I might be able to fix the issue by specifying an impersonated user. exchangeservice.ImpersonatedUserId = new ImpersonatedUserId(ConnectingIdType.SmtpAddress, "[email protected]"); But then I get a different error. "The account does not have permission to impersonate the requested user." The App Pool that the web application is running under is also my own account (same as the console application) so I have no idea what might be causing this issue. I am using .NET framework 3.5. Here is the code in full. var exchangeservice = new ExchangeService(ExchangeVersion.Exchange2010_SP1) { Timeout = 10000 }; var credentials = new System.Net.NetworkCredential("username", "pass", "domain"); exchangeservice.AutodiscoverUrl("[email protected]") FolderId rootFolderId = new FolderId(WellKnownFolderName.Inbox); var folderView = new FolderView(100) { Traversal = FolderTraversal.Shallow }; FindFoldersResults findFoldersResults = service.FindFolders(rootFolderId, folderView);

    Read the article

  • The data reader returned by the store data provider does not have enough columns

    - by molgan
    Hello I get the following error when I try to execute a stored procedure: "The data reader returned by the store data provider does not have enough columns" When I in the sql-manager execute it like this: DECLARE @return_value int, @EndDate datetime EXEC @return_value = [dbo].[GetSomeDate] @SomeID = 91, @EndDate = @EndDate OUTPUT SELECT @EndDate as N'@EndDate' SELECT 'Return Value' = @return_value GO It returns the value properly.... @SomeDate = '2010-03-24 09:00' And in my app I have: if (_entities.Connection.State == System.Data.ConnectionState.Closed) _entities.Connection.Open(); using (EntityCommand c = new EntityCommand("MyAppEntities.GetSomeDate", (EntityConnection)this._entities.Connection)) { c.CommandType = System.Data.CommandType.StoredProcedure; EntityParameter paramSomeID = new EntityParameter("SomeID", System.Data.DbType.Int32); paramSomeID.Direction = System.Data.ParameterDirection.Input; paramSomeID.Value = someID; c.Parameters.Add(paramSomeID); EntityParameter paramSomeDate = new EntityParameter("SomeDate", System.Data.DbType.DateTime); SomeDate.Direction = System.Data.ParameterDirection.Output; c.Parameters.Add(paramSomeDate); int retval = c.ExecuteNonQuery(); return (DateTime?)c.Parameters["SomeDate"].Value; Why does it complain about columns? I googled on error and someone said something about removing RETURN in sp, but I dont have any RETURN there. last like is like SELECT @SomeDate = D.SomeDate FROM .... /M

    Read the article

  • Caching with AVPlayer and AVAssetExportSession

    - by tba
    I would like to cache progressive-download videos using AVPlayer. How can I save an AVPlayer's item to disk? I'm trying to use AVAssetExportSession on the player's currentItem (which is fully loaded). This code is giving me "AVAssetExportSessionStatusFailed (The operation could not be completed)" : AVAsset *mediaAsset = self.player.currentItem.asset; AVAssetExportSession *es = [[AVAssetExportSession alloc] initWithAsset:mediaAsset presetName:AVAssetExportPresetLowQuality]; NSString *outPath = [NSTemporaryDirectory() stringByAppendingPathComponent:@"out.mp4"]; NSFileManager *fileManager = [NSFileManager defaultManager]; [fileManager removeItemAtPath:outPath error:NULL]; es.outputFileType = @"com.apple.quicktime-movie"; es.outputURL = [[[NSURL alloc] initFileURLWithPath:outPath] autorelease]; NSLog(@"exporting to %@",outPath); [es exportAsynchronouslyWithCompletionHandler:^{ NSString *status = @""; if( es.status == AVAssetExportSessionStatusUnknown ) status = @"AVAssetExportSessionStatusUnknown"; else if( es.status == AVAssetExportSessionStatusWaiting ) status = @"AVAssetExportSessionStatusWaiting"; else if( es.status == AVAssetExportSessionStatusExporting ) status = @"AVAssetExportSessionStatusExporting"; else if( es.status == AVAssetExportSessionStatusCompleted ) status = @"AVAssetExportSessionStatusCompleted"; else if( es.status == AVAssetExportSessionStatusFailed ) status = @"AVAssetExportSessionStatusFailed"; else if( es.status == AVAssetExportSessionStatusCancelled ) status = @"AVAssetExportSessionStatusCancelled"; NSLog(@"done exporting to %@ status %d = %@ (%@)",outPath,es.status, status,[[es error] localizedDescription]); }]; How can I export successfully? I'm looking into copying mediaAsset into an AVMutableComposition, but haven't had much luck with that either. Thanks! PS: Here are some questions from people trying to accomplish the same thing (but with MPMoviePlayerController): Cache Progressive downloaded content in MPMoviePlayerController Simultaneously stream and save a video? Caching videos to disk after successful preload by MPMoviePlayerController

    Read the article

  • How to use QSerialDevice in Qt?

    - by Tobias
    Hello, I am trying to use QSerialDevice in Qt to get a connection to my serial port. I also tried QextSerialPort before (which works on Windows Vista but unfortunately not on Windows XP ..) but I need an API which supports XP, Vista and Win7... I build the library and configured it this way: CONFIG += dll CONFIG += debug I did use the current version from SVN (0.2.0 - 2010-04-05) and the 0.2.0 zip package. After building the library I did copy it to my Qt Libdir (C:\Qt\2009.05\qt\lib) and also to C:\Windows\system32. Now I try to link against the lib in my project file: LIBS += -lqserialdevice I import the needed header (abstractserial.h) and use my own AbstractSerial like this: // Initialize this->serialPort->setDeviceName("COM1"); if (!this->serialPort->open(QIODevice::ReadWrite | QIODevice::Unbuffered)) qWarning() << "Error" << this->serialPort->errorString(); // Configure SerialPort this->serialPort->setBaudRate(AbstractSerial::BaudRate4800); this->serialPort->setDataBits(AbstractSerial::DataBits8); this->serialPort->setFlowControl(AbstractSerial::FlowControlOff); this->serialPort->setParity(AbstractSerial::ParityNone); this->serialPort->setStopBits(AbstractSerial::StopBits1); The problem is, that if I run my application, it crashes immediately with exit code -1073741515 (application failed to initialize properly). This is the same error I got using QextSerialPort under Windows XP (it worked with Windows Vista). If I build the QSerialDevice lib with release config and also my program, it crashes immediately but with exit code -1073741819 Can someone help me with this program or with another solution of getting a serial port to work with Qt (maybe another API or something?) Otherwise I have to use Windows API functions which would mean that my program won't work with UNIX systems.. If you have a solution for the problem with QextSerialPort under WinXP SP3, they are also welcome ;) Best Regards, Tobias

    Read the article

  • The "CreateRiaClientFilesTask" task failed unexpectedly.

    - by Mohammadreza
    Hi guys. I've VS 2010 and recently installed WCF RIA Services V1.0. For testing I have created a new Silverligh Business project but now every now and then when I rebuild the solution I receive the following error: Does anybody know why I get this? Thanks Error 1 The "CreateRiaClientFilesTask" task failed unexpectedly. System.IO.FileNotFoundException: Could not load file or assembly 'Microsoft.ServiceModel.DomainServices.Tools, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified. File name: 'Microsoft.ServiceModel.DomainServices.Tools, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMarkHandle stackMark, Boolean loadTypeFromPartialName, ObjectHandleOnStack type) at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark, Boolean loadTypeFromPartialName) at System.RuntimeType.GetType(String typeName, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark) at System.Type.GetType(String typeName, Boolean throwOnError) at System.Web.Hosting.HostingEnvironment.CreateWellKnownObjectInstance(String assemblyQualifiedName, Boolean failIfExists) at System.Web.Hosting.HostingEnvironment.CreateWellKnownObjectInstance(String assemblyQualifiedName, Boolean failIfExists) at System.Web.Hosting.ApplicationManager.CreateObjectInternal(String appId, Type type, IApplicationHost appHost, Boolean failIfExists, HostingEnvironmentParameters hostingParameters) at System.Web.Hosting.ApplicationManager.CreateObjectInternal(String appId, Type type, IApplicationHost appHost, Boolean failIfExists) at System.Web.Compilation.ClientBuildManager.CreateObject(Type type, Boolean failIfExists) at Microsoft.ServiceModel.DomainServices.Tools.CreateRiaClientFilesTask.CreateSharedTypeService(ClientBuildManager clientBuildManager, IEnumerable`1 serverAssemblies, ILogger logger) at Microsoft.ServiceModel.DomainServices.Tools.CreateRiaClientFilesTask.GenerateClientProxies() at Microsoft.ServiceModel.DomainServices.Tools.CreateRiaClientFilesTask.ExecuteInternal() at Microsoft.ServiceModel.DomainServices.Tools.RiaClientFilesTask.Execute() at Microsoft.Build.BackEnd.TaskExecutionHost.Microsoft.Build.BackEnd.ITaskExecutionHost.Execute() at Microsoft.Build.BackEnd.TaskBuilder.ExecuteInstantiatedTask(ITaskExecutionHost taskExecutionHost, TaskLoggingContext taskLoggingContext, TaskHost taskHost, ItemBucket bucket, TaskExecutionMode howToExecuteTask, Boolean& taskResult) WRN: Assembly binding logging is turned OFF. To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1. Note: There is some performance penalty associated with assembly bind failure logging. To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog]. BusinessApplication2

    Read the article

  • Installing VSTO 4.0 Causes VSTO 3.0 Addin to quit working

    - by Jacob Adams
    I just installed Visual Studio 2010 yesterday. As part of that I installed VSTO 4.0. Now when I run any Office application, my VSTO 3.0 addins fail to load. The error in the event log is Customization URI: file:///H:/PathToMyAddin/MyAddin.vsto Exception: Customization does not have the permissions required to create an application domain. ***** Exception Text ******* Microsoft.VisualStudio.Tools.Applications.Runtime.CannotCreateCustomizationDomainException: Customization does not have the permissions required to create an application domain. --- System.Security.SecurityException: Customized functionality in this application will not work because the administrator has listed file:///H:/PathToMyAddin/MyAddin.vsto as untrusted. Contact your administrator for further assistance. at Microsoft.VisualStudio.Tools.Office.Runtime.RuntimeUtilities.VerifySolutionUri(Uri uri) at Microsoft.VisualStudio.Tools.Office.Runtime.DomainCreator.CreateCustomizationDomainInternal(String solutionLocation, String manifestName, String documentName, Boolean showUIDuringDeployment, IntPtr hostServiceProvider, IntPtr& executor) The Zone of the assembly that failed was: MyComputer It seems like like maybe this is due to it trying to load different version of .NET is the same process/AppDomain. However the error would indicate it's some sort of permissions issue.

    Read the article

  • Unable to determine the URL to the Xap file

    - by Matthew Glace
    I started developing a Silverlight (SL) 4 application hosted in an ASP.NET site using Visual Studio 2010. Now I want to change it so that the SL application runs out of browser as if I had not chosen to host it in a web site when I created the SL project. First, I went to the properties of the web application and removed the SL project from the “Silverlight Applications” tab. Then, I went to the properties of the SL project and made sure the “Out-of-browser Application” option was chosen on the “Debug” tab with the SL project selected in the drop list. Finally, I made sure that the SL project was set as the “StartUp” project for the solution. The solution builds successfully however when I try to run I get the following message in an error dialog: Unable to determine the URL to the Xap file from web [web project name]. I'm assuming this is happening because the SL project is trying to copy the Xap file to the ClientBin folder of the web site. Obviously, the SL and web projects are still linked in some way despite my attempt to unlink the two. I have examined each project file in notepad to find any reference between them with no luck. What’s more frustrating is that I can achieve my desired result by creating a new SL application and un-checking the “Host the Silverlight application in a new or existing Web site in the solution” option. I know I could start my project over from scratch to solve this problem however I’m really curious as to what is causing this error. A Google search yielded no results.

    Read the article

  • Parsing nested JSON objects with JSON Framework for Objective-C

    - by Sheehan Alam
    I have the following JSON object: { "response": { "status": 200 }, "messages": [ { "message": { "user": "value" "pass": "value", "url": "value" } ] } } I am using JSON-Framework (also tried JSON Touch) to parse through this and create a dictionary. I want to access the "message" block and pull out the "user", "pass" and "url" values. In Obj-C I have the following code: // Create new SBJSON parser object SBJSON *parser = [[SBJSON alloc] init]; // Prepare URL request to download statuses from Twitter NSURLRequest *request = [NSURLRequest requestWithURL:[NSURL URLWithString:myURL]]; // Perform request and get JSON back as a NSData object NSData *response = [NSURLConnection sendSynchronousRequest:request returningResponse:nil error:nil]; // Get JSON as a NSString from NSData response NSString *json_string = [[NSString alloc] initWithData:response encoding:NSUTF8StringEncoding]; //Print contents of json-string NSArray *statuses = [parser objectWithString:json_string error:nil]; NSLog(@"Array Contents: %@", [statuses valueForKey:@"messages"]); NSLog(@"Array Count: %d", [statuses count]); NSDictionary *results = [json_string JSONValue]; NSArray *tweets = [[results objectForKey:@"messages"] objectForKey:@"message"]; for (NSDictionary *tweet in tweets) { NSString *url = [tweet objectForKey:@"url"]; NSLog(@"url is: %@",url); } I can pull out "messages" and see all of the "message" blocks, but I am unable to parse deeper and pull out the "user", "pass", and "url".

    Read the article

  • Unable to install SQL 2008 on Windows 7

    - by Axel
    SQL 2008 install hangs on Windows 7 The story: Trying to install SQL2008 on Windows 7 hangs on SqlEngineDBStartconfigAction_install_configrc_Cpu32. What I Tried: Uninstall hangs on validation Manual uninstall using msiinv.exe and msiexec /x works Added SQL service accounts to local admins no help Turn of UAC no help Last lines in setup log: 2010-04-01 16:18:05 SQLEngine: : Checking Engine checkpoint 'GetSqlServerProcessHandle' 2010-04-01 16:18:05 SQLEngine: --SqlServerServiceSCM: Waiting for nt event 'Global\sqlserverRecComplete' to be created 2010-04-01 16:18:07 SQLEngine: --SqlServerServiceSCM: Waiting for nt event 'Global\sqlserverRecComplete' or sql process handle to be signaled 2010-04-01 16:18:07 SQLEngine: : Checking Engine checkpoint 'WaitSqlServerStartEvents' 2010-04-01 16:18:53 Slp: Sco: Attempting to initialize script 2010-04-01 16:18:53 Slp: Sco: Attempting to initialize default connection string 2010-04-01 16:18:53 Slp: Sco: Attempting to set script connection protocol to NotSpecified 2010-04-01 16:18:53 Slp: Sco: Attempting to set script connection protocol to NamedPipes 2010-04-01 16:18:53 SQLEngine: --SqlDatabaseServiceConfig: Connection String: Data Source=\.\pipe\SQLLocal\MSSQLSERVER;Initial Catalog=master;Integrated Security=True;Pooling=False;Network Library=dbnmpntw;Application Name=SqlSetup 2010-04-01 16:18:53 SQLEngine: : Checking Engine checkpoint 'ServiceConfigConnect' 2010-04-01 16:18:53 SQLEngine: --SqlDatabaseServiceConfig: Connecting to SQL.... 2010-04-01 16:18:53 Slp: Sco: Attempting to connect script 2010-04-01 16:18:53 Slp: Connection string: Data Source=\.\pipe\SQLLocal\MSSQLSERVER;Initial Catalog=master;Integrated Security=True;Pooling=False;Network Library=dbnmpntw;Application Name=SqlSetup And now comes the fun part: When I open conf mgr I can see the service running, I enabled named pipes and TCP/IP, restarted the service I'm able to connect to the server using an OLE DB connection but not with the Native Client. And what I find suspicious is the following error in my app log: .NET Runtime Optimization Service (clr_optimization_v2.0.50727_32) - Failed to compile: C:\Program Files\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\Tools\VDT\DataProjects.dll . Error code = 0x8007000b In MS connect this is reported as a bug but MS is unable to reproduce the problem altough when you search the fora I'm not the only one with this problem. So any help is appreciated.

    Read the article

  • JQuery getJSON - ajax parseerror

    - by JW
    I've tried to parse the following json response with both the JQuery getJSON and ajax: [{"iId":"1","heading":"Management Services","body":"<h1>Program Overview</h1><h1>January 29, 2009</h1>"}] I've also tried it escaping the "/" characters like this: [{"iId":"1","heading":"Management Services","body":"<h1>Program Overview <\/h1><h1>January 29, 2009<\/h1>"}] When I use the getJSON it dose not execute the callback. So, I tried it with JQuery ajax as follows: $.ajax({ url: jURL, contentType: "application/json; charset=utf-8", dataType: "json", beforeSend: function(x) { if(x && x.overrideMimeType) { x.overrideMimeType("application/j-son;charset=UTF-8"); } }, success: function(data){ wId = data.iId; $("#txtHeading").val(data.heading); $("#txtBody").val(data.body); $("#add").slideUp("slow"); $("#edit").slideDown("slow"); },//success error: function (XMLHttpRequest, textStatus, errorThrown) { alert("XMLHttpRequest="+XMLHttpRequest.responseText+"\ntextStatus="+textStatus+"\nerrorThrown="+errorThrown); } }); The ajax hits the error ans alerts the following: XMLHttpRequest=[{"iId":"1","heading":"Management Services","body":"<h1>Program Overview </h1><h1>January 29, 2009</h1>"}] textStatus=parseerror errorThrown=undefined Then I tried a simple JQuery get call to return the JSON using the following code: $.get(jURL,function(data){ var json = eval("("+data+");"); wId = json.iId; $("#txtHeading").val(json.heading); $("#txtBody").val(json.body); $("#add").slideUp("slow"); $("#edit").slideDown("slow"); }) The .get returns the JSON, but the eval comes up with errors no matter how I've modified the JSON (content-type header, other variations of the format, etc.) What I've come up with is that there seem to be an issue returning the HTML in the JSON and getting it parsed. However, I have hope that I may have missed something that would allow me to get this data via JSON. Does anyone have any ideas?

    Read the article

< Previous Page | 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062  | Next Page >