Search Results

Search found 4858 results on 195 pages for 'terminal'.

Page 108/195 | < Previous Page | 104 105 106 107 108 109 110 111 112 113 114 115  | Next Page >

• Installing drivers for an ATI 6950 in Ubuntu

  - by aj.esler

  Is there any way to get ubuntu to recognise an ATI 6950? I have tried installing the proprietary ATI drivers, but these do not seem to work properly. It seems to screw up the gnome desktop, and starts booting into terminal. I'm somewhat of a linux newbie, so not really sure whats going wrong. I don't want to game on ubuntu, I just want it to recognise my dual monitor setup rather than mirroring the monitors, so any driver that does this is fine by me. It seems like the open source ATI radeon drivers will not support the 6950/6970 for some time, at least until kernel 2.6.38 is released. The card is also flashed with the 6970 firmware, not sure if this is important. I am running a 64 bit version of ubuntu, I installed ubuntu server 10.10, then installed gnome-desktop.

  Read the article

• Not recognize JDK after installation in ubuntu 12.10

  - by HFDev

  I did these steps without error: 1-JDK path : Downloads/jdk-6u37-linux-x64.bin 2-Commands in Terminal : mkdir Programs cd Programs bash ../Downloads/jdk-6u37-linux-x64.bin ln -s jdk-6u37-linux-x64 jdk 3-Set JAVA_HOME and Path: in HomeView MenuShow Hidden Files Then open .bashrc in text editor. I added the following lines to end of file. export JAVA_HOME=$Home/Programs/jdk export PATH=:$JAVA_HOME/bin:$PATH --------------------------------------------------------------------------------------- This is the result of executing the command echo $JAVA_HOME : /Programs/jdk This is the result of executing the command echo $PATH : :/Programs/jdk/bin:/usr/lib/lightdm/lightdm:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games1 ---------------------------------------------------------------------------------------- And problem is : This is the result of executing the command java -version : The program 'java' can be found in the following packages: * default-jre * gcj-4.6-jre-headless * gcj-4.7-jre-headless * openjdk-7-jre-headless * openjdk-6-jre-headless Try: sudo apt-get install

  Read the article

• Whenever I try to remove a Debian package I receive an Error

  - by Brenton Horne

  Whenever I type into the terminal the command: sudo dpkg -r '/home/brentonhorne/Downloads/virtualbox.deb' I receive the error: dpkg: error: --remove needs a valid package name but '/home/brentonhorne/Downloads/virtualbox.deb' is not: illegal package name in specifier '/home/brentonhorne/Downloads/virtualbox.deb': must start with an alphanumeric character Type dpkg --help for help about installing and deinstalling packages [*]; Use `dselect' or `aptitude' for user-friendly package management; Type dpkg -Dhelp for a list of dpkg debug flag values; Type dpkg --force-help for a list of forcing options; Type dpkg-deb --help for help about manipulating *.deb files; Options marked [*] produce a lot of output - pipe it through `less' or `more' ! How do I get around this problem?

  Read the article

• "Malformed line 6" error in my /etc/apt/sources.list

  - by Odi1215

  I'm new to Ubuntu so I don't really know much yet. I encountered this problem while on the terminal: E: Malformed line 6 in source list /etc/apt/sources.list (dist parse) E: The list of sources could not be read. What should I do? Help would be much appreciated. Here's my source.list: # /etc/apt/sources.list deb http://archive.ubuntu.com/ubuntu/ precise main restricted universe multiverse deb http://security.ubuntu.com/ubuntu/ precise-security main restricted universe multiverse deb http://archive.ubuntu.com/ubuntu/ precise-updates main restricted universe multiverse deb http://archive.canonical.com/ partner deb-src http://archive.canonical.com/ partner /etc/apt/sources.list

  Read the article

• Ubuntu 12.04. Compiz Failure. Computer has nothing to use

  - by Teddy

  I updated to Ubuntu 12.04 with Compiz..now Compiz is failing and I have no tool bars or ways of getting to applications except for firefox from a link presented from sending an error report. How am I supposed to: Fix this mess with no navigation to get to the terminal, or software center. When will this problem be fixed? When I updated the system why didn't it change me back to the crappy Unity interface (No offense). If it can't be fixed how do I get my files back?

  Read the article

• Unable to Mount Seagate Array from Iomega

  - by GE Cardiff

  I am new to Ubuntu so please be kind! My (Windows based) Iomega Storcentre ix2-200 stopped working, with all my business data upon it. Iomega helpfully told me that I should get Fedora, remove the Seagate hard drives and recover the information by connecting via a USB / SATA cable. First I could not get Fedora to load (due to it needing an Internet connection before loading complete) so I got Ubuntu - much easier to load. Software seems fine, and in "Computer" there is an "Array" icon - this is clearly the Seagate hard drive I have connected. It will not, however, Mount. "Unable to mount location, can't mount file". Any help gratefully received! As a slight aside, I can't seem to find "terminal" in this version of Ubuntu?

  Read the article

• Why won't Ubuntu copy large files to FAT32 flash Drives?

  - by yurividal

  Since I installed 11.10 I am unable to copy large files (say 1gb or more) to ANY usb drive that is formated as FAT. The file starts copying, but soon an error appears, saying "Unable to Copy" . "Error splicing file: Input/output error". I am able to do it via terminal, using the cp command. I use Gnome3, but the same error has happened in Unity as well. Apparently it works if I format the USB drive as NTFS or EXT3, EXT4. But, for many appliances, FAT is necessary. The problem is also not with the USB port, because it works under Windows. It did not happen before, when I had 10.04 installed.

  Read the article

• No windows whatsoever after compiz reset

  - by Shashank Singh

  Currently using 12.04. This time I was trying to use the application switcher, and it asked me to resolve a few conflicts most of which were not easy to comprehend. So after some yes and no dialogue boxes leading me nowhere, I thought a reset should set things fine. However, after preferences-reset to default, I can't see any window!! NONE whatsoever except the log out one when I press ctrl+alt+del All I can see is the wallpaper and the mouse pointer. I cant even see the terminal or anything when I press alt+f2. I am posting this when I switch to ubuntu 2d (I cant make out the difference between the two, but this just works for now almost the same way)

  Read the article

• Cinnamon Settings blank after update

  - by Seth Balmore

  Using Ubuntu 12.04 with the cinnamon desktop, I installed the most recent updates and now when I open "System Settings" the entire window appears as a blank white screen. The headers for APPEARANCE, PREFERENCES, and HARDWARE are present, but the usual icons for *Background, *Hot Corners, *Printers, etc. are no longer visible. Some of these settings can still be altered via the terminal: cinnamon-settings backgrounds cinnamon-settings applets cinnamon-settings mouse and touchpad But other commands, such as cinnamon-settings hot corners are met with an error. This is obviously a problem with cinnamon, so I just want to bring it to attention and find out when they plan on fixing the bug. A workaround can be found on the web, but it seems way to risky to rely on.

  Read the article

• Boot problem with Ubuntu 11.10

  - by leonard

  So, I am an Ubuntu newbie, and I don't know a thing about it. I tried to install restricted extras (am I using it right?) through terminal, but it seems I failed :) maybe because during installation the internet connection crashed... anyway, I restarted and I got the Ubuntu intro screen at the boot, and then a black screen appeared with this information: checking battery state I restarted and it showed something else, so I rebooted for 5 times. Then a screen appeared *starting bluetooth *pulseaudio configured for per-user sessions saned disabled; edit /etc/default/saned I tried this: My fresh installation doesn't load. (PulseAudio problem) but didn't know how to save so I just skipped to update-grub, anyway nothing helped. What do I do?

  Read the article

• GPU On-the-fly encoding of video through Logitech HD Webcam C510

  - by Ashfame

  Originally asked here but I edited that to move this question as a different one on suggestion by a fellow member. I read that I should have a Core2Duo 2.2Ghz for 720p but I have a 2.0Ghz one, would it be possible for me to first record it and then encode it after recording if my processor really start giving issue when doing on-the-fly encoding? I also have a ATI HD 4850 512MB card, if it can help in encoding on-the-fly or is there a chance that my graphics card alone can handle it and those specs were just for a system without a graphics card? I believe so. Also, I got no worries in dealing with console, if I have to do some of the things above in terminal. Other possible significant details: I have a dual screen setup 29" (1360X768) & 22" (1680X1050) which might be using some good power from GPU and I have 2GB DDR2 800Mhz RAM.

  Read the article

• Samba installation failed on ubuntu 12.10

  - by Ayyaz

  I was trying to install samba to access shared printer on windows pc connected via office network, following response came out from terminal. please guide me how to install Samba or any other alternative. crm@crm-HP-G62-Notebook-PC:~$ sudo apt-get install samba [sudo] password for crm: Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: samba : Depends: samba-common (= 2:3.6.6-3ubuntu4) but 2:3.6.6-3ubuntu5 is to be installed Depends: libwbclient0 (= 2:3.6.6-3ubuntu4) but 2:3.6.6-3ubuntu5 is to be installed Recommends: tdb-tools but it is not going to be installed E: Unable to correct problems, you have held broken packages. crm@crm-HP-G62-Notebook-PC:~$

  Read the article

• 12.10 lost window maximize and minimize options, utility bar and launcher lost too

  - by user12448

  I recently installed Ubuntu 12.10 on my Dell Inspiron 7520. Everything is good except the hyperactive fans.The graphic cards are Intel and AMD Radeon 7730. I am trying to get away with the fan problem butI don't really know the terminal hence I am just trying to use the commands available on the forums.But this time I don't know what did I do that now I don't have the utility bar, launch bar and the basic features like the window minimize and maximize don't work. I have this impression I may have uninstalled some drivers . But still not sure what to do. Feel a need of dire help!

  Read the article

• How can i change focus when game locks it?

  - by GrizzLy

  I am playing wolfenstein:enemy territory, and if i play it in windowed mode, i can't change focus from game to something else (alt+tab doesnt work). EDIT1: As far as i could try, only ctrl+alt+Fx works (x is one number, for example F1 will switch to terminal). Could i somehow capture this kind of shortcut somewhere on X level and then send it to compiz to change focus (minimize currently focused window)? EDIT2: I found one other way, it works for Wolf:ET, it may help with other games too, if you turn on gameconsole (usually tilde key) game will release mouse lock (in windowed mode).

  Read the article

• "The system is running in low graphics mode", unable to connect to the Internet

  - by Blah

  When I try to log onto Ubuntu, I get a notice that reads: The system is running in low graphics mode. I searched for a solution and there are a slew of answers. However, many of them seem to suggest reinstalling different things. After pressing Ctrl+Alt+F1 and getting to a terminal, I attempt commands like sudo apt-get install example. Upon doing so I get notices that say things such as could not resolve host which I am assuming means I'm not connected to the Internet. Since I can not connect to the Internet, none of these responses are helpful to me. What can I do?

  Read the article

• Setting APPMENU_DISPLAY_BOTH for gnome applications does not work on Ubuntu 12.04 LTS

  - by Jack'

  To start the application with the menu enabled in the application and the panel, the following command has to be used: APPMENU_DISPLAY_BOTH=1 appname I recently discovered that this only works for non-gnome applications on Ubuntu 12.04 LTS, i.e. if you replace appname with applications such as gnome-terminal, gedit, evince, empathy, evolution, rhythmbox, nautilus, etc. only global menus will be displayed. However, if you start, for example, gimp or inkscape by using APPMENU_DISPLAY_BOTH, both global and local menus will be shown. The questions is: why is APPMENU_DISPLAY_BOTH not taken into account when starting such gnome applications? P.S. I know how to disable global menus in order to get the local ones (UBUNTU_MENUPROXY trick, removing appmenu-gtk/qt packages, removing the indicator-appmenu, etc.) Thanks for the help!

  Read the article

• Ripping MP3s in Rhythmbox Ubuntu 12.10 (64 bit)?

  - by James Fellows Yates

  I installed a couple of days ago Ubuntu 12.10 (64 bit). I today tried ripping a CD in the MP3 format. However, whenever I try to rip, it says it is missing an extra multimedia plugin "Gstreamer extra plug-ins (i386)". I then try to install the :i386 version of the gstreamer-ugly plugins, but then I get the same problem but with the id3-demuxer (or something similar) The Terminal output I get from both problems (but replace the "MPEG-1 Layer 3 (MP3) encoder" with the "ID3-demuxer" name) is: james@clefairy:~$ rhythmbox (rhythmbox:24122): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed Rhythmbox-Message: Missing plugin: gstreamer|0.10|rhythmbox|MPEG-1 Layer 3 (MP3) encoder|encoder-audio/mpeg, mpegversion=(int)1, layer=(int)3 /usr/lib/python2.7/dist-packages/gobject/constants.py:24: Warning: g_boxed_type_register_static: assertion `g_type_from_name (name) == 0' failed import gobject._gobject It doesn't help that each time I have to install/remove the entire Gstreamer-ugly collection each time - I can't find that specific file. The CD plays fine, it's the ripping plugin that doesn't seem to work. I didn't have this problem previously on 12.04 (64 bit).

  Read the article

• Laptop works fine with ac adapter, hangs after login screen using battery

  - by tavoton

  I did an Ubuntu 10.10 Desktop Edition clean install (amd64 version) on a notebook Medion Akoya E1311. With AC adapter everything works fine, but using battery, it hangs after login screen. I can type login, password too, and I can press login button. But then I can see mouse cursor and lower task bar, not upper, and nothing works. The only thing I can do is login on a terminal with ctrl+alt+F1, this is ok. Nothing seems alive on Gnome except mouse cursor. The only thing I did after Ubuntu fresh install was donwloading driver for RTL8191SE from Realtek web, because WiFi didn't work, now works fine, with ac adapter of course. Hardware is a Notebook Medion Akoya E1311 AMD Sempron 210U 1 GB DDR2 ATI RS690M (Radeon X1200 Series) Western Digital 160GB wireless RTL8191SEvB ethernet RTL8101E/RTL8102E

  Read the article

• Logitech M515 does not work after upgrade to 12.04

  - by user877329

  After upgrading to 12.04, my Logitech M515 does not work here is some output from the terminal: lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 0411:002a BUFFALO INC. (formerly MelCo., Inc.) Bus 001 Device 004: ID 055d:3021 Samsung Electro-Mechanics Co. Bus 002 Device 002: ID 413c:2005 Dell Computer Corp. RT7D50 Keyboard Bus 004 Device 002: ID 0582:0074 Roland Corp. EDIROL UA-25 Bus 005 Device 002: ID 046d:c52b Logitech, Inc. Unifying Receiver dmesg | grep Logitech [ 30.470528] logitech-djreceiver 0003:046D:C52B.0004: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.3-2/input2 The cursor does not move. Also the mouse was working in 11.10 and is working in Windows NT 5.1.2600.

  Read the article

• Why I cannot mount ISO file from this .desktop file by `fuseiso`?

  - by Kevin Dong Nai Jia

  I want to mount iso files without root permission by fuseiso, and this is how to mount a iso file: fuseiso -p '/path/to/isofilename' '/media/isofilename' , so I make a .desktop file followed Freedesktop Standard (The Exec key) as bellow: #!/usr/bin/env xdg-open [Desktop Entry] Name=Mount ISO image Name[zh_TW]=??????? Exec=fuseiso -p %U "/media/$(basename %U)" Terminal=false MimeType=application/x-cd-image , but it failed. I think it failed because of $(basename %U), if it is changed to a fixed string, the iso file can be mounted. How can I solve this problem?

  Read the article

• kde keyboard problems Ubuntu 12.04

  - by chazdg

  I have Unity & Gnome 3.4 installed successfully. All Dell keyboard keys work perfectly with both. I installed kde - full via terminal. Everything is working great except for the hotkeys. No calculator, no Mute, nothing. I check which keyboard is selected and choose Dell Multimedia USB Keyboard. No luck. How do I get my Dell keyboard to work with kde - the same keyboard that works with Unity & Gnome 3.4. Thanks in advance for any advice.

  Read the article

• "Unknown Filesystem" error without CDROM

  - by Utku Tarhan

  I've got a problem with Ubuntu 12.04 LTS. At first I ran mount command on terminal. Then I restarted my computer. After that, when my computer opened there is writing this: error: unknown filesystem grub rescue I searched commands and I found ls command. I tried it and I got this: (hd0) (hd0,msdos5) (hd0,msdos1) My computer's DVD driver is broken and I tried to boot Ubuntu on USB but it doesn't worked. My computer's specs: PC Name: HP Presario F780ET Processor: AMD Turion 64 X2 Mobile Technology TL-60 Ram: 2GB Ubuntu Version: 12.04 LTS

  Read the article

• convert video file to .ogg

  - by Levan

  I've been having trouble with this because I'm new to Linux: I would like to convert different video formats to ogv. I found some terminal commands like this: ffmpeg -i input.avi -acodec libvorbis -ac 1 -b 768k output.ogg The problem with these type of commands is that they are intended to change bit rate, fps, or even resolution. I would like to just change the file format without changing anything else about the video. I looked at the man pages for ffmpeg and found some useful info but I don't know how to space command-line options. Are there any easy ways to do this? In addition, is there a command to change the bit rate so that it doesn't go over a certain rate?

  Read the article

• how to find available wireless networks

  - by Quinn

  I'm using an HP Pavilion dv6000 I've looked at other answers similar to this question how ever when I look at my network symbol it doesn't say anything that the answer below says "Make sure that your wifi hardware switch is on or not. It is either F2 or F12 or near to it. Once the switch is enabled, there is a small fan-like applet on the top panel (Gnome Network Manager), fourth from the right. Click on it and if there is no tick mark on the option 'Enable Wireless', enable it. Wait till your wifi connection name appears." it how says 'Enable Networking' my wi-fi switch is on and I've tried using terminal to kill the applet as another answer suggests trying. Does anyone have any other ideas that might help? Just in case anybodies curious as to how I'm posting this I'm on my other ubuntu laptop that's running an older version.

  Read the article

• Skype no sound on Kubuntu 13.10

  - by Michael Aquilina

  I just performed a fresh install of Kubuntu 13.10 on my machine. Everything is working great except for Skype. I cannot get any form of audio playback in Skype. In the sound settings panel I get a bunch of different sound sources, none of which work! At the moment I have set it to "sysdefault (unknown)" I installed it using the deb package found on the official website. My phonon backend is using phonon-gstreamer. When running skype from the terminal I get the following error messages: ALSA lib control.c:953:(snd_ctl_open_noupdate) Invalid CTL plughw:CARD=PCH ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave Is this a known problem or has anyone experienced the problem and managed to solve it?

  Read the article

< Previous Page | 104 105 106 107 108 109 110 111 112 113 114 115  | Next Page >