Search Results

Search found 6395 results on 256 pages for 'weird behaviour'.

Page 108/256 | < Previous Page | 104 105 106 107 108 109 110 111 112 113 114 115  | Next Page >

• Upon clicking on a file, excel opens but not the file itself

  - by william

  Platform: Windows XP SP2, Excel 2007 Problem description: Upon clicking on a file in Windows Explorer (file is either .xls or .xlsx) Excel 2007 opens, but does not open the file itself. I need either to click on a file again in Windows Explorer or open it manually with File/Open ... from Excel. Does anyone know what could cause this rather strange behaviour ? The old versions of Excel worked "normally" ... i.e. upon clicking on a file, an Excel would open along with the file. Please, help !

  Read the article

• servers connected to a poweredge 6248 receive traffic for their 'neighbours'

  - by Hannes

  In the network we have a few vlans but at the moment I was investigating vlan2 which carries the most traffic. When tcpdumping on the eth0.2 interface, I see a lot of packets arriving which are not addressed to, nor coming from the server. I checked this on several servers in the network and they all have the same issues. In short, our switches don't switch the traffic but threat it like they are a hub. Can you tell me what settings on the dell poweredge 6248 should prevent this behaviour?

  Read the article

• Linux Mint loses Window Focus

  - by Chris

  I recently installed Linux Mint 13 64bit with Cinamon Desktop and run into a weird problem. It's about losing Mouse-Focus if more than one Window are open. For Example, I open up Chromium, play around a little bit, and then, if I try to open any Programms from the Taskbar, I cannot click on it. It seems that Chromium won't free his Focus. Another Example, if I open two Windows (e.g. Chromium and a Terminal) and I work with Chromium, then click into the Terminal I get no Focus to it. Sorry, its a bit hard to explain.

  Read the article

• windows 2000 freezing during large disk write

  - by robert

  We have a windows 2000 sp4 server which freezes up for about 1 minutes while its web-app does a ~500mb write operation. I can see the webapp start to do I/O activity (through process explorer) then the RDP session becomes unresponsive, you can click on windows and buttons but nothing happens. When the disk write finally finishes the session 'catches up' on all the mouse clicks you did during the freeze in a mad flurry of window activity and the server returns to normal. During the freeze the web-app stops as well. The same behaviour happens on the console of the server. (so I know its not a network thing) Nothing appears in the Event logs. Its like nothing happened. I have upgraded all the HP hardware drivers to the latest proliant support pack. And also run a HP hardware diagnostics which found nothing wrong. What would cause a disk write to lock the rest of the OS?

  Read the article

• Why would searching in Websphere Portal Administration exclude some results?

  - by Scott Leis

  I have logged into a website based on Websphere Portal 6.0, gone to the Administration console, then to Portlet Management - Portlets. At a guess, there are about 200 portlets on this server. 22 portlets have a title starting with "IGM", but if I use the "Title starts with" search option and enter "igm" (or any case variation), only one of these portlets is found. The portlets excluded from the "Title starts with" search are also excluded from the "Title contains" search, but some of them can be found with the "Unique name contains" search (noting that only 5 of these have a unique name). Why would title searches exclude these portlets? I also see similar behaviour in other areas of the Portal administration. E.g. going to Portal Settings - Custom Unique Names - Pages, and performing title searches excludes some results, depending on the search terms entered.

  Read the article

• Sonicwall Global VPN Client fails to connect, despite successful connections from other computers from behind the same router

  - by JesperE

  I've recently been unable to connect to our Sonicwall VPN at work. The Sonicwall client is stuck on "connecting", and the log says "The peer is not responding to phase1 ISAKMP requests". The weird thing is that this is not an issue with my own PC, only my work laptop (Lenovo W530 running Windows 7 64-bit), and this has only appeared recently. This ought to rule out any problems with my ISP blocking VPN, or issues with the router itself. My company's IT department says that they cannot see anything in their logs when I'm trying to connect. My conclusion is that something is wrong on the laptop itself. Disabling the firewall does not help. Can the VPN connection be blocked in other ways? What should I be looking for? EDIT: This problem has "magically" disappeared, without any changes done in my network. I can only assume that this was caused by some network glitch with my ISP.

  Read the article

• GVim Stop at end of line with arrows

  - by viking

  When using the arrow keys in Vim on Linux, they act the same way as h and l , stopping when the end of a line is reached. GVim on Windows doesn't do this, instead allowing the arrow keys continue past the end (or beginning) of a line and on to the next line. Is there any way to change the arrow key behaviour and cause them to stop at the end of a line like the character navigation keys? NOTE: I am not looking for a way to get to the beginning or end of a line, I realize that 0 and $ do this.

  Read the article

• Windows 7: This notification icon is currently not active

  - by icelava

  Some time this week, without any major change done to one of my x64 Windows 7 computers, the Media eject icon goes missing in the systray taskbar area. When I attempt to reset the notification settings, i see this "This notification icon is currently not active" info warning Initially KB945011 managed to restore the icon after a reboot. But now it appears to have disappeared again. It seems to have disappeared (cannot really confirm) after I unlock the physical logon session (which was previously rerouted to a virtual Remote Desktop session). Anybody have knowledge on possible causes to this missing behaviour? UPDATE 1 Feb 11 It seems that happens often when I remote desktop to the computer, I see it from the remote screen, but when i unlock the screen physically, it disappears. It would reappear when I connect to remote desktop again. Hmmmmm.

  Read the article

• Commit charge peak higher than system limit

  - by Grubsnik

  We are seeing some very strange behaviour on our servers and google didn't turn up anything usefull, so I'm tossing it out here. A standard server is configured with 4GB Ram, 2 4GB pagefiles and running windows server 2003. The servers are running 50-120 vb6/.net applications which normally consume no more than 100mb of memory, but will occasionally run up to 300 mb. The issue with a single process spending way too much memory is being traced down somewhere else, but the thing that is baffling us is that the reported peak charge is vastly higher than what we have available. As the image above shows, we are getting reported peaks that are way higher than what the system is actually capable of delivering. This number has been seen as high as 29GB, which makes no sense at all for a system with a limit of 12GB. Does anyone have an idea what is going on?

  Read the article

• What's the best practice for keeping track of Microsoft solution stack Hot fixes and patches?

  - by melaos

  i'm currently working on a product that is build on microsoft stacks such as sql server, entity framework, wcf, c# and biztalk server. so recently we're running into weird issues on our production servers and now we're troubleshooting this issue. we're kind of lost. so we're looking into anti virus exclusion and cumulatives updates for biztalk server. but my question now is what's the best way to keep track of all the hot fixes? do we just check for them, i.e. google it up only when we have issues? i've googled online and found that there's a microsoft baseline analyzer tool. and the other thing is microsoft blog which is updated on a weekly basis which contains all the recent hot fixes. are there a better way or best way? thanks for my ignorant question.

  Read the article

• Why does a Remote Desktop Redirected Printer Doc appear every time I connect to Windows Server 2003 SBS?

  - by Jim Dagg

  I've run into a weird, persistent issue regarding a remote desktop connection. Every time I successfully log into a server running Windows Server 2003 SBS, without taking any further action, after a few seconds a print job spontaneously appears on my machine, titled "Remote Desktop Redirected Printer Doc". The document is 4K, datatype RAW, processor "WinPrint". I've heard of people running into this issue before, but can't seem to hunt down a coherent solution. It's a minor annoyance, but I get annoyed when Windows complains about a print job that, as far as I know, came from nowhere. Any thoughts on why this would occur and how I could prevent it from happening?

  Read the article

• Opening an oracle database crashes the service [SOLVED]

  - by tundal45

  I am experiencing a weird issue with Oracle where the service started fine after a crash. The database mount went fine as well. However, when I issue alter database open; command, the database does not open, gives a generic cannot connect to the database error & crashes the service. Oracle support has not seen this issue before so it's pretty scary. The fact that there are no logs that give any leads as to what could be causing this is also scary. I was wondering if good folks over at Server Fault had seen something like this or have some insights on things that I could try. It's Oracle 10g running on Windows Server 2003. Thanks, Ashish

  Read the article

• Any experience with SATA SAS Interposer Cards?

  - by korkman

  Driven by the current price difference between SATA and SAS disks on one side and the potentially bad behaviour of SATA disks in bigger storage arrays on the other side, I have found so-called SATA-to-SAS interposer cards. Advertised as "seamlessly adding SAS capabilities to existing SATA disk drives", I wonder if anyone here has had some experience with these or similar products. The major benefits I can identify are the increased cable voltage (if all drives are SAS connected), the ability to power-cycle the drive and multipath (if desired). Obviously the SATA drive will still have to be RAID edition. The question is: Do these cards indeed increase the overall reliability of a storage system, or will failing SATA disks cause trouble nevertheless? Edit: I'm not asking for hypothetical answers, only actual experience please. I'm well aware that the typical 10k SAS drive is more reliable (and better performing) than 7200 SATA drives. But how does a nearline SAS, which is phyiscally the same disk as its SATA counterpart, compare to the SATA version with interposer?

  Read the article

• How to stop iPhone's safari browser from silently dropping tabs when you open a 9th tab?

  - by MattH

  Currently in the iPhone safari mobile browser, if you have 8 tabs open and open a new tab, the new tab opens as requested, but one of the existing tabs is silently discarded. Is there any known way to change this behaviour, e.g. to prompt me first and allow me to choose which tab to close, or to open the 9th tab, or to at least have visibility of what tab was closed? When I open something in a new tab it's because I want to come back to the previous tab later, so this conflicts with the way I usually browse the web. My current workaround is to manually monitor the tab count -- i.e. to check that the count is 7 or less before opening a new tab.

  Read the article

• Why does HDTune report better performing drives 2 months after installing them?

  - by Rolnik

  OK, so this is really weird. I ran HDTune on a newly set-up home-built computer and got the following readings from my drives in mid-November. SSD 154 MB/s RAID1 87 RAID0 198 (software installs) RAID0 98 Swap drive Today, in January, I run HDTune (same version) and get these results, in MB/s: SSD 186 RAID1 98 RAID0 241 RAID0 98 (Swap drive) Here are more details that HDTune reports on the SSD drive: HD Tune: OCZ-VERTEX Benchmark Blockquote Transfer Rate Minimum : 135.4 MB/sec Transfer Rate Maximum : 219.4 MB/sec Transfer Rate Average : 185.7 MB/sec Access Time : 0.1 ms Burst Rate : 187.3 MB/sec CPU Usage : -1.0% To get to my question: Why are my hard drives improving in performance? Most of my logical drives are in some form of RAID, except for the SSD. Will this performance ever deteriorate? Note, none of my drives are a hybrid drive that uses some form of SSD to enhance the write/reads on actual platters.

  Read the article

• Best Practices in Preventing Locks in File sharing in Windows?

  - by crosenblum

  We have a web development server, that has our source control on it. That we use via mapped drives to open/edit/save/create files on to it. But I have noticed a lot of weird glitches with either the file lock/sharing/etc For example, if i have a file open on my local pc, and try to check out that file via my source control on dev, it error's out. The source control I use is QCVS by Qumasoft. Or If I use cuteftp to download something to dev, via my local pc, it won't download unless I close that file. So my brain sniff's and figures this is either an issue with folder/network/sharing, or an issue of permissions. Has anyone else had similar issues, and what did they do to fix it permanently? Thank you...

  Read the article

• Is my website running on an iPhone?

  - by Stefano Borini

  Provocative question, but in any case, this is what it would appear... unless there's some other reason, of course. In my cystat wordpress log, I obtained the following entry IP Browser OS Date Method Type URL 127.0.0.1 Safari 419.3 iPhone July 30, 2009 7:39 pm GET BLOG /blog/ The IP address is the IP of the visiting client. It's clear that this is not possible. Why do I get 127.0.0.1 as IP? cystat bug? some weird network trick I am not aware of? or is my website really running on an iPhone, and the guy at the applestore is reading my blog ?

  Read the article

• My windows keyboard is being "clever" with the quote keys - how can I stop it?

  - by Marcin

  I'm using windows 7 on a laptop. On the laptop keyboard, for some reason, the quote key (which has both double and single quote on it) is doing some "clever" annoying things: When I press single-quote (or double-quote), windows doesn't send any characters until I press it twice (resulting in '' or "") When I press it before a vowel, I get some kind of accented character. As I usually only write English, this is annoying. The backtick/tilde key is subject to similar behaviour. I have not attempted to set up my computer to process anything other than English. My keyboard appears to be (in so far as these things are standard on laptops) a standard US qwerty keyboard. How can I stop this happening?

  Read the article

• SSH only works after intentionally failed password

  - by pyraz

  So, I'm having a rather weird problem. I have a server, that when I try to SSH into, immediately closes the connection if I type in the correct password on the first attempt. However, if I purposefully enter a wrong password on the first attempt, and then enter a correct password at the second or third prompt, it successfully logs me into the computer. Similarly, when I try to use public key authentication, I get an immediate closed connection. If, however, I enter a wrong password for my key file, followed by another wrong password once it reverts to password authentication, I can successfully log in as long as I provide the correct password at the second or third prompt. The machine is running Red Hat Enterprise Linux Server release 6.2 (Santiago), and is using LDAP and PAM for authentication. Any ideas on where to start debugging this one? Let me know what config files I need to provide and I'll be happy to do so.

  Read the article

• Why is the network speed on my Mac Pro (early 2009) so slow?

  - by Rafael

  I have a really weird networking issue on my Mac Pro (Early 2009). I can’t get higher network speeds than about 2MBit/s. It doesn’t matter if this is over AirPort or one of the Ethernet ports. An iMac and a Mac mini in the same network with almost the same configuration get about 25-30 MBit/s. I’ve read a couple of things about this on the official Apple forums, but there is no helpful information. Anyone else with Mac Pro network speed issues and who knows how to solve them?

  Read the article

• Which programs using my internet connection ? [closed]

  - by Eray Alakese

  Possible Duplicate: Monitor all and any internet traffic from my home PC - what should I use? My internet connection has 4GB quota. But my quota is run out very fast. I setup Net Limiter , for look which programs using my internet connection. But there isn't any weird program. There is only firefox.exe . So, how can i look all programs which using my connection and leech my bandwidth quota? For example, is there any CMD command ? like netstat

  Read the article

• Lightweight tool for viewing raw HTTP messages?

  - by rewbs

  Hi, I'm investigating differences in behaviour between a couple of Web servers. I need to see raw response data from the servers (i.e. before the response is de-chunked if it has "Transfer-Encoding:chunked" and before it is decompressed if it has "Content-Encoding:gzip"). I can find plenty of simple HTTP client that nearly do what I need (e.g. Poster, RESTClient), but they tend to decode the response one step too far. Network analysers like Wireshark give me what I need but are a bit heavyweight. Telnet is my best bet so far, but is a bit too simplistic (actions like capturing data or entering requests are a bit laborious). Can anyone recommend a good, lightweight tool for sending / viewing the raw data that constitute HTTP messages? Edit: I should add that I'm on Windows. Also, the tool would need to work both with remote and local servers.

  Read the article

• AIX 7.1 su root password bug?

  - by exxoid

  In our AIX 7.1 machine there is a weird bug we've ran into.. If you are logged into the AIX box via SSH as a regular user and you try to su - you get prompted for the password, lets say our password is "P@$$w0rd23", you can type "P@$$w0rd2ANYTHING" and it will still grant you root. As long as you have "P@$$w0rd2" it will grant you root regardless of what else you specify in the authentication and even though the actual password is "P@$$w0rd23". This seems to be a bug? Anyone see anything like this before? Thanks.

  Read the article

• Route eth0 to internet traffic and eth1 to local traffic

  - by Romain Caire

  How can I route all my internet traffic on eth0 (everything except 192.168.1.0/24) and route my local traffic through eth1 (192.168.1.0)? Here is my attempt : # Flush ALL THE THINGS. ip route flush table main # Restore the main table. I flushed it because OpenVPN does weird things to it. ip route add 127.0.0.0/8 via 127.0.0.1 dev lo ip route add 0.0.0.0/0 via 164.67.195.1 ip route add 192.168.1.0/24 via 192.168.1.1 ip route flush cache

  Read the article

• Windows 7 changes desktop icon location when switching from External Monitor to Internal Monitor (laptop)

  - by Gareth Jones

  I have a Windows 7 Laptop, and lately its been acting really weird with my 1080p Monitor. When I get home from school, Ill plug my screen in, and close my laptop lid (which makes the laptop treat the Monitor as the primary and only screen). However it will move my desktop icons! This also happens when I remove / unplug the screen, as shown in the pictures. I hate this, as Im the kinda person who's use to every icon being in a set spot, and so am use to their location. Its a massive hassle to try and move the icons back to their original spot. Anyone have any ideas on how to fix this? Thanks P.S it could be due to the resolution of the screen's being different, but this never happened before in the past Icons on External Moniter (after having moved them manually back into place): Icons after unplugging external monitor (and so using Laptop screen):

  Read the article

< Previous Page | 104 105 106 107 108 109 110 111 112 113 114 115  | Next Page >