Search Results

Search found 5064 results on 203 pages for 'automatic ref counting'.

Page 109/203 | < Previous Page | 105 106 107 108 109 110 111 112 113 114 115 116  | Next Page >

• Amazon EC2 instances changes server time/date on reboots and other time weirdness

  - by puffpio

  I have a windows instance up in EC2. I manually set the timezone to Pacific. 1) For some reason using window's built in time sync doesn't work in the instance...but whatever. I turn off automatic time syncing... but 2) On reboot the time on the server changes! For example, if i reboot it at 4PM on Wednesday, when the server comes back up it will read 12 noon on Thursday! As a result any access to Amazon's other services like SImpleDB fail because the timestamps generated are too far off the current time. Has anyone seen this or figured this out?

  Read the article

• help setting up an IPSEC vpn from my linux box

  - by robthewolf

  I have an office with a router and a remote server (Linux - Ubuntu 10.10). Both locations need to connect to a data supplier through a VPN. The VPN is an IPSEC gateway. I was able to configure my Linksys rv42 router to create a VPN connection successfully and now I need to do the same for Linux server. I have been messing around with this for too long. First I tried OpenVPN, but that is SSL and not IPSEC. Then I tried Shrew. I think I have the settings correct but I haven't been able to create the connection. It maybe that I have to use something else like a direct IPSEC config or something like that. If someone knows of a way to turn the following settings that I have been given below into a working IPSEC VPN connection I would be very grateful. Here are the settings I was given that must be used to connect to my supplier: Local destination network: 192.168.4.0/24 Local destination hosts: 192.168.4.100 Remote destination network: 192.167.40.0/24 Remote destination hosts: 192.168.40.27 VPN peering point: xxx.xxx.xxx.xxx Then they have given me the following details: IPSEC/ISAKMP Phase 1 Parameters: Authentication method: pre shared secret Diffie Hellman group: group 2 Encryption Algorithm: 3DES Lifetime in seconds:28800 Phase 2 parameters: IPSEC security: ESP Encryption algortims: 3DES Authentication algorithms: MD5 lifetime in seconds: 28800 pfs: disabled Here are the settings from my attempt to use shrew: n:version:2 n:network-ike-port:500 n:network-mtu-size:1380 n:client-addr-auto:0 n:network-frag-size:540 n:network-dpd-enable:1 n:network-notify-enable:1 n:client-banner-enable:1 n:client-dns-used:1 b:auth-mutual-psk:YjJzN2QzdDhyN2EyZDNpNG42ZzQ= n:phase1-dhgroup:2 n:phase1-keylen:0 n:phase1-life-secs:28800 n:phase1-life-kbytes:0 n:vendor-chkpt-enable:0 n:phase2-keylen:0 n:phase2-pfsgroup:-1 n:phase2-life-secs:28800 n:phase2-life-kbytes:0 n:policy-nailed:0 n:policy-list-auto:1 n:client-dns-auto:1 n:network-natt-port:4500 n:network-natt-rate:15 s:client-dns-addr:0.0.0.0 s:client-dns-suffix: s:network-host:xxx.xxx.xxx.xxx s:client-auto-mode:pull s:client-iface:virtual s:client-ip-addr:192.168.4.0 s:client-ip-mask:255.255.255.0 s:network-natt-mode:enable s:network-frag-mode:disable s:auth-method:mutual-psk s:ident-client-type:address s:ident-client-data:192.168.4.0 s:ident-server-type:address s:ident-server-data:192.168.40.0 s:phase1-exchange:aggressive s:phase1-cipher:3des s:phase1-hash:md5 s:phase2-transform:3des s:phase2-hmac:md5 s:ipcomp-transform:disabled Finally here is the debug output from the shrew log: 10/12/22 17:22:18 ii : ipc client process thread begin ... 10/12/22 17:22:18 < A : peer config add message 10/12/22 17:22:18 DB : peer added ( obj count = 1 ) 10/12/22 17:22:18 ii : local address 217.xxx.xxx.xxx selected for peer 10/12/22 17:22:18 DB : tunnel added ( obj count = 1 ) 10/12/22 17:22:18 < A : proposal config message 10/12/22 17:22:18 < A : proposal config message 10/12/22 17:22:18 < A : client config message 10/12/22 17:22:18 < A : local id '192.168.4.0' message 10/12/22 17:22:18 < A : remote id '192.168.40.0' message 10/12/22 17:22:18 < A : preshared key message 10/12/22 17:22:18 < A : peer tunnel enable message 10/12/22 17:22:18 DB : new phase1 ( ISAKMP initiator ) 10/12/22 17:22:18 DB : exchange type is aggressive 10/12/22 17:22:18 DB : 217.xxx.xxx.xxx:500 <- 206.xxx.xxx.xxx:500 10/12/22 17:22:18 DB : c1a8b31ac860995d:0000000000000000 10/12/22 17:22:18 DB : phase1 added ( obj count = 1 ) 10/12/22 17:22:18 : security association payload 10/12/22 17:22:18 : - proposal #1 payload 10/12/22 17:22:18 : -- transform #1 payload 10/12/22 17:22:18 : key exchange payload 10/12/22 17:22:18 : nonce payload 10/12/22 17:22:18 : identification payload 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local supports nat-t ( draft v00 ) 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local supports nat-t ( draft v01 ) 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local supports nat-t ( draft v02 ) 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local supports nat-t ( draft v03 ) 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local supports nat-t ( rfc ) 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local supports DPDv1 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local is SHREW SOFT compatible 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local is NETSCREEN compatible 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local is SIDEWINDER compatible 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local is CISCO UNITY compatible 10/12/22 17:22:18 = : cookies c1a8b31ac860995d:0000000000000000 10/12/22 17:22:18 = : message 00000000 10/12/22 17:22:18 - : send IKE packet 217.xxx.xxx.xxx:500 - 206.xxx.xxx.xxx:500 ( 484 bytes ) 10/12/22 17:22:18 DB : phase1 resend event scheduled ( ref count = 2 ) 10/12/22 17:22:18 ii : opened tap device tap0 10/12/22 17:22:28 - : resend 1 phase1 packet(s) 217.xxx.xxx.xxx:500 - 206.xxx.xxx.xxx:500 10/12/22 17:22:38 - : resend 1 phase1 packet(s) 217.xxx.xxx.xxx:500 - 206.xxx.xxx.xxx:500 10/12/22 17:22:48 - : resend 1 phase1 packet(s) 217.xxx.xxx.xxx:500 - 206.xxx.xxx.xxx:500 10/12/22 17:22:58 ii : resend limit exceeded for phase1 exchange 10/12/22 17:22:58 ii : phase1 removal before expire time 10/12/22 17:22:58 DB : phase1 deleted ( obj count = 0 ) 10/12/22 17:22:58 ii : closed tap device tap0 10/12/22 17:22:58 DB : tunnel stats event canceled ( ref count = 1 ) 10/12/22 17:22:58 DB : removing tunnel config references 10/12/22 17:22:58 DB : removing tunnel phase2 references 10/12/22 17:22:58 DB : removing tunnel phase1 references 10/12/22 17:22:58 DB : tunnel deleted ( obj count = 0 ) 10/12/22 17:22:58 DB : removing all peer tunnel refrences 10/12/22 17:22:58 DB : peer deleted ( obj count = 0 ) 10/12/22 17:22:58 ii : ipc client process thread exit ...

  Read the article

• Mixing RAM brands

  - by Andy

  Hey guys, I'm scheduled to install a server at a colo facility tomorrow, but I've hit a snag. ESXi doesn't like the fact that I have 12GB ram in my server (8gb on one side of CPU, 4gb on the other). I currently have 3xCrucial 4gb ECC DDR3 1333mhz sticks (http://www.amazon.com/gp/product/B001TGT7EE/ref=oss_product) and I'm planning on stopping by Fry's on the way to the colo facility so I can pick up another stick so that ESXi will install. Problem is, Fry's doesn't stock Crucial RAM. They do have a stick that I think is identical to my crucial one: http://www.frys.com/product/5915524?site=sr:SEARCH:MAIN_RSLT_PG Will this be dangerous to use in my server? The specs on the RAM are the same as far as I know (ecc registered, 1333mhz, ddr3, 4gb).

  Read the article

• System Center Configuration Manager 2007 - Debugging Client Installs

  - by Dayton Brown

  Hi All: Having an issue installing the CCMsetup client on desktops. The CCMSetup makes it to the PC, files are there, it gets added to the services for automatic start, it starts, but quits almost instantly. Logs on the desktop show a entry like this. <![LOG[Failed to successfully complete HTTP request. (StatusCode at WinHttpQueryHeaders: 404)]LOG]!><time="14:28:51.183+240" date="06-11-2009" component="ccmsetup" context="" type="3" thread="2388" file="ccmsetup.cpp:5808"> What am I missing? EDIT: Firewall is off on both client and server.

  Read the article

• Router's ssid changes from infrastructure to ad-hoc

  - by waldo

  For a period of time the router's ssid is shown (on various computers) as a normal infrastructure network - computers connect fine and everything works however after a few minutes / hours all computers see the same ssid as an ad-hoc network (not infrastructure). At this point a computer that was already connected continues to work - a computer that isn't cannot connect. Rebooting the router temporarily restores the visibility of the correct infrastructure ssid. Is something interfering? Connecting computers: macbook (2009), iphone 3g, windows vista desktop, windows xp desktop. Details: - D-Link DSL-2740B router set to WPA2-PSK (Personal) - Enable Wireless : Yes - Wireless Network Name (SSID) : ###### - Country : Australia - Wireless Channel : 1 - 802.11 Mode : Mixed 802.11n, 802.11g and 802.11b - Channel Width : Auto 20/40 MHz - Transmission Rate : Best (automatic) - Hide Wireless Network : No - Group Key Update Interval : 0 (seconds)

  Read the article

• Using rsync to take backup of folder

  - by Ali

  Hi, I have a server (Linux) with NAS which is mounted as folder "mount" I have website in "public_html" folder. I want to take backup of website in mount folder automatically at certain intervals for e.g. every hour. I read that there is something called "rsync" which is used to make two folders sync. And it doesn't copy all files every time and instead matches if the file has been changed and then only update changed files. How do I use it to make automatic backups? I have root access to server. Thanks

  Read the article

• SQL Server 2005 SP3 Express Backups Incredibly Slow

  - by Adam Robinson

  I'm attempting to troubleshoot an issue with one of our customers who's using SQL Server 2005 SP3 Express to house their application data. The automatic backups that we perform when upgrading our application are timing out after 30 minutes, and I've been sitting and watching the backup take place in SSMS for about 20 minutes now and it's only gotten to 30%. The database is only slightly over 1GB, so I'm baffled as to what could be causing this sort of horrible performance. The machine is a 1.87GHz Xeon with 3GB of RAM running Windows Server 2003 R2. While that's hardly a powerful box, this seems ridiculous. Does anyone have any idea why these backups could be taking so long and, more importantly, how I can do something about it?

  Read the article

• Why does this loopback device creation malfunction?

  - by user50118

  The stackoverflow people thought this was more appropriate here, I put it there as it is part of a program but I can see their POV, so here it is: At the bottom of the code you can see it failing. In fact, I'll put it here at the start too because it is the problem I need to solve: [350591.924819] EXT4-fs (loop0): bad geometry: block count 9750806 exceeds size of device (9750168 blocks) I don't understand why the device is supposedly too small. I made this partition two days ago with normal fdisk, it was created and formatted with ext4 supplying no options other than the partition (/dev/sdb2) to format. The only explaination I can think of is that ext4 has the size of the partition wrong somehow but that seems very unlikely. What is wrong with my math? The offset is correct, you can see that with the file command, and the size should be correct too because End - Start comes to the same number of sectors minus 1, just like it should (A disk starting on sector 1 and ending on sector 2 would be 2 - 1 = 1 and have two sectors). # sfdisk -luS /dev/sdb Disk /dev/sdb: 9729 cylinders, 255 heads, 63 sectors/track Units = sectors of 512 bytes, counting from 0 Device Boot Start End #sectors Id System /dev/sdb2 78295040 156296384 78001345 83 Linux # losetup -r -f --show -o $((78295040 * 512)) --sizelimit $((78001345 * 512)) /dev/sdb /dev/loop0 # file -s /dev/loop0 /dev/loop0: Linux rev 1.0 ext4 filesystem data (needs journal recovery) (extents) (large files) (huge files) # mount -o ro -t ext4 /dev/loop0 /mnt mount: wrong fs type, bad option, bad superblock on /dev/loop0, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so # dmesg | tail -n 1 [350591.924819] EXT4-fs (loop0): bad geometry: block count 9750806 exceeds size of device (9750168 blocks)

  Read the article

• Always use one slow connection in preference of a "faster" one

  - by billc.cn

  In Windows, there's this automatic metric thing where the metric is selected according to the declared speed of the link. I now have a gigabit LAN routed to a 2MB DSL service and a HSDPA mobile broadband connection. The former is always chosen for Internet packets even though the latter is actually faster. I tried setting the mobile broadband's interface metric to 1 and raising its priority in the advanced settings of the adapter settings, but this does not seem to affect the metric of the default route. The default route to the Ethernet interface always have a lower metric than the mobile broadband interface. Am I missing something here?

  Read the article

• Changing the placement of the left border of tables in Word

  - by mkva

  Is it possible to have tables in Word such that the border lines align with the text outside the table? In MS Word, the left-side (and also the right-side) border is by default not aligned with the rest of the text on a page. It's actually the text in the first column of a table that is aligned with the text outside the table. And the table border is a little bit to the left. I find this layout quite a bit annoying, as I don't want to have any elements on a page outside the range that is used by normal text. I know that I can change the column delimiters manually (via the ruler). I'm looking for some more automatic way like setting the defaults for the whole document or such.

  Read the article

• Automatically delete old files from a specified folder?

  - by davr

  I want to set up an automatic task that will automatically delete files older than X days from a specific folder. I'd prefer to do it without having to install any 3rd party software, but I'll be ok if it's a very small and simple utility. I want this to force me to keep my files organized. I am setting my browser to download to a standard folder, and then with this script to automatically delete files older than a week, I will be forced to move & organize downloaded files I want to keep.

  Read the article

• Can I connect an external antenna to a range extender?

  - by ercan

  I live in a kind of dormitory and the next access point is 60 meters away from my room. So I bought a range extender (TP-Link WA730RE) and installed it into my room in the same height as the access point. But my problem is still not solved. The reception is slightly better but my connection still gets broken every two minutes. The antenna that comes with this range extender was 4dB. My question is, can I buy an 8dB external antenna (like this one: http://www.amazon.com/TP-Link-TL-ANT2408C-Desktop-Omni-Directional-Antenna/dp/B0034CQSKW/ref=sr_1_14?ie=UTF8&qid=1332074993&sr=8-14) and replace it with the antenna that comes with the range extender? Or is this external antenna only suitable for the "receiver" end of the connection, i.e. the computer?

  Read the article

• FFMPEG Segfault Solutions

  - by Brentley_11

  I'm trying to convert a bunch of movies into h.264 mp4's using FFMPEG. These movies are sourced from various portable camcorders such as the Flip Mino HD and the Kodak ZI8. One issue I'm having with video from the ZI8 is it seems to be causing FFMPEG to segfault. Here is my command: ffmpeg -i 'XmasSailor720p60fps.MOV' -threads 2 -acodec libfaac -ab 96kb -vcodec libx264 -vpre hq -b 500kb -s 484x272 XmasSailor.mp4 Here is the output: FFmpeg version SVN-r20668, Copyright (c) 2000-2009 Fabrice Bellard, et al. built on Dec 2 2009 18:37:34 with gcc 4.2.4 (Ubuntu 4.2.4-1ubuntu4) configuration: --enable-libfaac --enable-libfaad --enable-libmp3lame --enable-libx264 --enable-gpl --enable-nonfree --enable-postproc --enable-pthreads --enable-shared libavutil 50. 5. 1 / 50. 5. 1 libavcodec 52.42. 0 / 52.42. 0 libavformat 52.39. 2 / 52.39. 2 libavdevice 52. 2. 0 / 52. 2. 0 libswscale 0. 7. 2 / 0. 7. 2 libpostproc 51. 2. 0 / 51. 2. 0 Seems stream 0 codec frame rate differs from container frame rate: 59.94 (60000/1001) -> 29.97 (30000/1001) Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'XmasSailor720p60fps.MOV': Duration: 00:00:05.37, start: 0.000000, bitrate: 12021 kb/s Stream #0.0(eng): Video: h264, yuv420p, 1280x720 [PAR 1:1 DAR 16:9], 11994 kb/s, 29.97 tbr, 90k tbn, 59.94 tbc Stream #0.1(eng): Audio: aac, 48000 Hz, stereo, s16, 128 kb/s Metadata major_brand : qt minor_version : 0 compatible_brands: qt comment : KODAK Zi8 Pocket Video Camera comment-eng : KODAK Zi8 Pocket Video Camera [libx264 @ 0x99e1020]using SAR=1/1 [libx264 @ 0x99e1020]using cpu capabilities: MMX2 SSE2Fast SSSE3 FastShuffle SSE4.1 Cache64 [libx264 @ 0x99e1020]profile High, level 2.1 Output #0, mp4, to 'XmasSailor.mp4': Stream #0.0(eng): Video: libx264, yuv420p, 484x272 [PAR 1:1 DAR 121:68], q=10-51, 500 kb/s, 30k tbn, 29.97 tbc Stream #0.1(eng): Audio: aac, 48000 Hz, stereo, s16, 96 kb/s Metadata comment : Encoded with the Statusfirm Video Transcoder Stream mapping: Stream #0.0 -> #0.0 Stream #0.1 -> #0.1 Press [q] to stop encoding [h264 @ 0x99de950]B picture before any references, skipping [h264 @ 0x99de950]decode_slice_header error [h264 @ 0x99de950]no frame! Error while decoding stream #0.0 [h264 @ 0x99de950]B picture before any references, skipping [h264 @ 0x99de950]decode_slice_header error [h264 @ 0x99de950]no frame! Error while decoding stream #0.0 frame= 20 fps= 0 q=13797729.0 size= 0kB time=0.66 bitrate= 0.6kbits/s frame= 39 fps= 37 q=13797729.0 size= 0kB time=1.30 bitrate= 0.3kbits/s frame= 48 fps= 30 q=33.0 size= 11kB time=0.10 bitrate= 903.0kbits/s frame= 58 fps= 27 q=31.0 size= 22kB time=0.43 bitrate= 421.0kbits/s frame= 67 fps= 25 q=29.0 size= 41kB time=0.73 bitrate= 462.6kbits/s frame= 75 fps= 23 q=29.0 size= 59kB time=1.00 bitrate= 486.7kbits/s frame= 83 fps= 22 q=29.0 size= 81kB time=1.27 bitrate= 521.9kbits/s frame= 90 fps= 21 q=29.0 size= 97kB time=1.50 bitrate= 530.1kbits/s frame= 98 fps= 20 q=29.0 size= 114kB time=1.77 bitrate= 526.9kbits/s frame= 106 fps= 20 q=29.0 size= 134kB time=2.04 bitrate= 537.7kbits/s frame= 114 fps= 19 q=29.0 size= 150kB time=2.30 bitrate= 533.7kbits/s frame= 122 fps= 19 q=29.0 size= 172kB time=2.57 bitrate= 547.8kbits/s frame= 130 fps= 19 q=29.0 size= 193kB time=2.84 bitrate= 557.5kbits/s frame= 136 fps= 18 q=29.0 size= 211kB time=3.04 bitrate= 570.0kbits/s frame= 144 fps= 18 q=29.0 size= 242kB time=3.30 bitrate= 599.5kbits/s frame= 152 fps= 17 q=30.0 size= 261kB time=3.57 bitrate= 598.6kbits/s frame= 157 fps= 15 q=-1.0 Lsize= 368kB time=5.21 bitrate= 579.3kbits/s video:302kB audio:61kB global headers:0kB muxing overhead 1.416371% [libx264 @ 0x99e1020]frame I:1 Avg QP:27.22 size: 8720 [libx264 @ 0x99e1020]frame P:48 Avg QP:25.15 size: 3759 [libx264 @ 0x99e1020]frame B:108 Avg QP:30.10 size: 1105 [libx264 @ 0x99e1020]consecutive B-frames: 0.6% 11.5% 28.8% 59.0% [libx264 @ 0x99e1020]mb I I16..4: 28.5% 47.6% 23.9% [libx264 @ 0x99e1020]mb P I16..4: 0.8% 1.3% 0.5% P16..4: 50.6% 17.7% 13.1% 0.0% 0.0% skip:15.9% [libx264 @ 0x99e1020]mb B I16..4: 0.2% 0.3% 0.1% B16..8: 44.0% 1.2% 2.6% direct: 5.1% skip:46.5% L0:45.5% L1:51.0% BI: 3.5% [libx264 @ 0x99e1020]final ratefactor: 23.51 [libx264 @ 0x99e1020]8x8 transform intra:49.9% inter:67.9% [libx264 @ 0x99e1020]direct mvs spatial:98.1% temporal:1.9% [libx264 @ 0x99e1020]coded y,uvDC,uvAC intra: 54.7% 76.1% 41.4% inter: 17.1% 24.4% 7.8% [libx264 @ 0x99e1020]i16 v,h,dc,p: 18% 52% 5% 25% [libx264 @ 0x99e1020]i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 12% 22% 9% 7% 10% 10% 9% 8% 13% [libx264 @ 0x99e1020]i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 13% 18% 8% 8% 10% 13% 10% 9% 12% [libx264 @ 0x99e1020]Weighted P-Frames: Y:10.4% [libx264 @ 0x99e1020]ref P L0: 60.2% 15.3% 11.0% 7.6% 5.2% 0.7% [libx264 @ 0x99e1020]ref B L0: 72.6% 15.6% 11.8% [libx264 @ 0x99e1020]kb/s:471.17 Segmentation fault I'm wondering if anyone else has ran into similar issues. I wasn't able to find anything helpful via Google. Another question I have is if anyone knows of a company that offers paid support for FFMPEG. Thank you for your time.

  Read the article

• IBM storage ds3400 Cant connect to management using fiber

  - by Eli B

  i have a problem with a DS3400 IBM storage system we bought a few years back. when i try to manage the storage using its IBM storage management i cant find it using automatic detection even though its connected directly using the fiber and i can see the Logical drives connected and working properly. when i tried to connect the two management Ethernet wires and manage the storage directly by entering the IP address manually i am able to connect however after i make several changes to the controller configuration one of the controllers stops responding and i am not able to ping it directly (since you cant make any changes without being connected to both controllers this is a problem) whats more bizarre is that when i change the IP of the controller that doesn't respond it starts working .. i have found some articles over the web explaining stuff about LUN31 being missing and causing similar problems however all my attempts to manually configure it failed . *link to an example http://www-947.ibm.com/support/entry/portal/docdisplay?lndocid=MIGR-5075711 in short im trying to get my storage to appear in the storage manager when directly connected using only the fiber cable directly attached. thanks in advance

  Read the article

• How to get HTTP preseed to work correctly on Ubuntu 10.04 LTS (Lucid)?

  - by netvope

  Installation media: ubuntu-10.04-desktop-i386.iso I tried a lot of different boot parameters, but either the installer ignored the preseed configuration, or it boot itself directly as LiveCD. An example of the boot parameters I've tried: auto url=http://mydomain.com/path/preseed.cfg boot=casper only-ubiquity initrd=/casper/initrd.lz quiet splash -- If I remove only-ubiquity, it boots as a LiveCD. If I remove boot=casper, it won't boot. If I add vga=normal locale=en_US console-setup/layoutcode=us console-setup/ask_detect=false interface=auto, it still can't do automatic install. If I remove auto, it's the same. What is the correct boot parameters for launching such an installation? From the apache log of the server hosting preseed.cfg, I see that the installer has no problems fetching the preseed file. My preseed file is almost identical to the one at https://help.ubuntu.com/10.04/installation-guide/example-preseed.txt. Moreover, I have run debconf-set-selections -c preseed.cfg to ensure that the preseed file is correct.

  Read the article

• Sharing Internet Connection in Windows 7 is so much more frustrated than Windows XP

  - by Phuong Nguyen

  Back to the time of Windows XP, from Properties dialog of my Wireless Connection, I can enable sharing and then select LAN network from the Drop Down List and boom, I can share it with my friend. We just need a LAN cable (either cross or not-cross is OK) and his Laptop will get an auto IP to gain access to internet. But now with the new Windows 7, everything starts to suck. I cannot see the Drop Down List any more in the sharing panel and my friends Laptop cannot get an automatic IP anymore. Am I doing anything wrong over there? How can I gain back the peace I used to have with Windows XP?

  Read the article

• Systemctl hangs trying to start MySQL on Fedora

  - by Cerin

  When I try to start Mysql on Fedora via systemctl start mysqld.service, it hangs indefinitely and never starts. Running mysqld_safe --skip-grant-tables & or mysqld_safe --nowatch --basedir=/usr starts the server just fine, indicating the database is still there, but using service or systemctl doesn't work at all. Nothing is shown in /var/log/mysqld.log. However, `/var/log/messages shows thousands of messages like: Oct 29 15:55:52 myserver systemd[1]: mysqld.service holdoff time over, scheduling restart. Oct 29 15:55:52 myserver systemd[1]: Job pending for unit, delaying automatic restart. How do I diagnose what's wrong and get MySQL to start?

  Read the article

• IIS 7 with verisign certificate, invalid certificate returned

  - by bh213

  We have IIS7 on windows 2008 and we installed verisign certificate and bound it to https. Certificate seems fine. Chain: mysite.com - not expired VeriSign international server CA class 3 - not expired Verisign Class 3 Public primary certification Authority - not expired Yet when I use verisign online validation, I get that second certificate is expired. https://knowledge.verisign.com/support/ssl-certificates-support/index?page=content&id=AR1130# This is what it reports, mysite is reported to be ok: ---------------- --Issued To-- Organization: VeriSign Trust Network Organizational Unit: www.verisign.com/CPS Incorp.by Ref. LIABILITY LTD.(c)97 VeriSign Organizational Unit 2: VeriSign International Server CA - Class 3 Organizational Unit 3: VeriSign,, Inc. --Issued By-- Organization: VeriSign,, Inc. Organizational Unit: Class 3 Public Primary Certification Authority Country: US Validity Start: Wed Apr 16 17:00:00 PDT 1997 Validity End: Wed Jan 07 15:59:59 PST 2004 ---------------- Any ideas?

  Read the article

• UPS for hard drive protection

  - by dimi

  I am in a place where electricity is not ideal (old house, no ground), sometimes it occasionally shuts down and supposedly there are some spikes. I consider using UPS with the goal to increase safety of my personal data. My first priority is the health of my internal and external USB hard drives which can be damaged due to possible power instability. I do not care that much about possible losses of not-saved work, instead I just want to let my system have a minimum time to turn off without any risk of physical damaging my hard drives. Would a cheap offline UPS suit my neads? Or do i need a better one with automatic voltage regulator (AVR)? How critical is AVR for the hard drives? The external ones require their own power supplies and will be plugged directly into UPS.

  Read the article

• OpenVPN and PPTP on XEN VPS

  - by amiv

  I have Debian based system (Ubuntu 11.10) on XEN VPS. I've installed OpenVPN and works great. I need to install PPTP too, so did it and clients can connect, but they have no internet on client side. If I connect to VPN over PPTP I can ping and access to only my VPS by its IP, but ony that. There's no "internet" on client side. It looks it's not DNS problems (I'm using 8.8.8.8) because I can't ping known IPs. I bet the solution is simple, but don't have any idea. Any guess? /etc/pptpd.conf option /etc/ppp/pptpd-options logwtmp localip 46.38.xx.xx remoteip 10.1.0.1-10 /etc/ppp/pptpd-options name pptpd refuse-pap refuse-chap refuse-mschap require-mschap-v2 require-mppe-128 ms-dns 8.8.8.8 ms-dns 8.8.4.4 proxyarp nodefaultroute lock nobsdcomp /etc/ppp/ip-up [...] ifconfig ppp0 mtu 1400 /etc/sysctl.conf [...] net.ipv4.ip_forward=1 Command which I run: iptables -t nat -A POSTROUTING -j SNAT --to-source 46.38.xx.xx (IP of my VPS) The client can connect, first one gets IP 10.1.0.1 and DNS from Google. I bet it's iptables problem, am I right? I'm iptables noob and I don't have idea what's wrong. And here's the ifconfig and route command before client connect via PPTP: root@vps3780:~# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default xx.xx.tel.ru 0.0.0.0 UG 100 0 0 eth0 10.8.0.0 10.8.0.2 255.255.255.0 UG 0 0 0 tun0 10.8.0.2 * 255.255.255.255 UH 0 0 0 tun0 46.38.xx.0 * 255.255.255.0 U 0 0 0 eth0 root@vps3780:~# ifconfig eth0 Link encap:Ethernet HWaddr 00:16:3e:56:xx:xx inet addr:46.38.xx.xx Bcast:0.0.0.0 Mask:255.255.255.0 inet6 addr: fe80::216:xx:xx:dfb6/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:22671 errors:0 dropped:81 overruns:0 frame:0 TX packets:2266 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1813358 (1.8 MB) TX bytes:667626 (667.6 KB) Interrupt:24 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:100 errors:0 dropped:0 overruns:0 frame:0 TX packets:100 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:10778 (10.7 KB) TX bytes:10778 (10.7 KB) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.8.0.1 P-t-P:10.8.0.2 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:602 errors:0 dropped:0 overruns:0 frame:0 TX packets:612 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:90850 (90.8 KB) TX bytes:418904 (418.9 KB) And here's the ifconfig and route command after client connect via PPTP: root@vps3780:~# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default xx.xx.tel.ru 0.0.0.0 UG 100 0 0 eth0 10.1.0.1 * 255.255.255.255 UH 0 0 0 ppp0 10.8.0.0 10.8.0.2 255.255.255.0 UG 0 0 0 tun0 10.8.0.2 * 255.255.255.255 UH 0 0 0 tun0 46.38.xx.0 * 255.255.255.0 U 0 0 0 eth0 root@vps3780:~# ifconfig eth0 Link encap:Ethernet HWaddr 00:16:3e:56:xx:xx inet addr:46.38.xx.xx Bcast:0.0.0.0 Mask:255.255.255.0 inet6 addr: fe80::216:xx:xx:dfb6/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:22989 errors:0 dropped:82 overruns:0 frame:0 TX packets:2352 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1841310 (1.8 MB) TX bytes:678456 (678.4 KB) Interrupt:24 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:112 errors:0 dropped:0 overruns:0 frame:0 TX packets:112 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:12102 (12.1 KB) TX bytes:12102 (12.1 KB) ppp0 Link encap:Point-to-Point Protocol inet addr:46.38.xx.xx P-t-P:10.1.0.1 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1400 Metric:1 RX packets:66 errors:0 dropped:0 overruns:0 frame:0 TX packets:15 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:3 RX bytes:10028 (10.0 KB) TX bytes:660 (660.0 B) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.8.0.1 P-t-P:10.8.0.2 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:602 errors:0 dropped:0 overruns:0 frame:0 TX packets:612 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:90850 (90.8 KB) TX bytes:418904 (418.9 KB) And ugly iptables --list output: root@vps3780:~# iptables --list Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED ACCEPT all -- 10.8.0.0/24 anywhere REJECT all -- anywhere anywhere reject-with icmp-port-unreachable ACCEPT all -- 10.1.0.0/24 anywhere ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED ACCEPT all -- 10.1.0.0/24 anywhere REJECT all -- anywhere anywhere reject-with icmp-port-unreachable ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED ACCEPT all -- 10.8.0.0/24 anywhere REJECT all -- anywhere anywhere reject-with icmp-port-unreachable And ugly iptables -t nat -L output: root@vps3780:~# iptables -t nat -L Chain PREROUTING (policy ACCEPT) target prot opt source destination Chain INPUT (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination Chain POSTROUTING (policy ACCEPT) target prot opt source destination SNAT all -- 10.8.0.0/24 anywhere to:46.38.xx.xx MASQUERADE all -- 10.1.0.0/24 anywhere SNAT all -- 10.1.0.0/24 anywhere to:46.38.xx.xx SNAT all -- 10.8.0.0/24 anywhere to:46.38.xx.xx SNAT all -- 10.1.0.0/24 anywhere to:46.38.xx.xx MASQUERADE all -- anywhere anywhere SNAT all -- anywhere anywhere to:46.38.xx.xx SNAT all -- 10.8.0.0/24 anywhere to:46.38.xx.xx MASQUERADE all -- anywhere anywhere MASQUERADE all -- 10.1.0.0/24 anywhere MASQUERADE all -- anywhere anywhere MASQUERADE all -- 10.1.0.0/24 anywhere As I said - OpenVPN works very good. 10.8.0.0/24 for OpenVPN (on tun0). PPTP won't work. 10.1.0.0/24 for PPTP (on ppp0). Clients can connect, but they haven't "internet". Any suggestions will be appreciated. Second whole day fighting with no results. EDIT: iptables -t filter -F - it resolved my problem :-)

  Read the article

• Hot swapping for Linux web/database servers

  - by Art

  Is there a way to perform the following under Linux: There are two web servers, main and backup There are two database servers (postgres), main and backup Web Servers are in sync with each other, ie. configuration/content/applications are the same Backup database is continuously synced up with main database. If either of main servers goes down, it's being replaced with backup one on the fly. When main database server goes back up, all the data from backup server is uploaded to it. Essentially, I need the hot swapping working automatically with no or minimal user intervention, if possible. Recovery procedure is preferably automatic but can include some manual steps.

  Read the article

• Personal Virtual Desktop Collection: User Assignment

  - by Fitzroy

  Using Windows Server 2012 Remote Desktop Services, I have a 'Personal Virtual Desktop Collection' with automatic user assignment enabled. According to Microsoft "Personal virtual desktops are permanently assigned to a user account and the user logs on to the same virtual desktop each time." Is there a way either through the Server Manager UI or PowerShell to determine which user has been assigned to which VM? The only way I have found so far is to query the 'Remote Desktop Users' group on each VM in the collection, however that requires each VM to be powered on. There must be a better way.

  Read the article

• How can I migrate websites between two identical servers?

  - by edude05

  I have two servers that have a nearly identical (software) configuration. We are upgrading the web servers to run windows server 2008 R2, one already is however the main one (that currently has sites) is on WS2008. Now, the old server is ns.mydomain.com and the new server is ns1.mydomain.com. Since dns automatically fails over to ns1.mydomain.com I'd like a way to move all the vhosts to the new server. Is there an automatic way to move / recreate all the vhosts on the new server? I have figured out how to migrate the DNS records already DNS Migration and since both servers are on the same private network migrating the website data isn't a large issue. Every site is running PHP & MySQL and the MySQL server is external so the records won't have to be moved. Thanks

  Read the article

• Can I configure mod_proxy to use different parameters based on HTTP Method?

  - by Graham Lea

  I'm using mod_proxy as a failover proxy with two balance members. While mod_proxy marks dead nodes as dead, it still routes one request per minute to each dead node and, if it's still dead, will either return 503 to the client (if maxattempts=0) or retry on another node (if it's 0). The backends are serving a REST web service. Currently I have set maxattempts=0 because I don't want to retry POSTs and DELETEs. This means that when one node is dead, each minute a random client will receive a 503. Unfortunately, most of our clients are interpreting codes like 503 as "everything is dead" rather than "that didnt work but please try that again". In order to program some kind of automatic retry for safe requests at the proxy layer, I'd like to configure mod_proxy to use maxattempts=1 for GET and HEAD requests and maxattempts=0 for all other HTTP Methods. Is this possible? (And how? :)

  Read the article

• Backup Dropbox to Amazon Glacier

  - by joekr

  i'm using Dropbox for Backup which means i keep all my files in my Dropbox folder (encrypted using encfs but that should not be relevant). I like this solution because it is automatic and keeps copies of my files on several machines at different locations. The only thing i could see go wrong is that Dropbox has some sort of bug that tells all my machines to delete the files. So currently i do a Backup of the Dropbox folder to an external Harddrive. With Amazon Glacier it seems affordable to automate Backup snapshots of my Dropbox. What i am looking for is a tool that will do this for me - the base case scenario would be that files would go from Dropbox (using their API) directly to Amazon as uploading the ~80GB from my home connection would take forever... Thanks!

  Read the article

< Previous Page | 105 106 107 108 109 110 111 112 113 114 115 116  | Next Page >